new patented free-form technology surpasses all others in thinness and design
DESCRIPTION
PRESTIGE II. New Patented Free-Form Technology Surpasses All Others in Thinness and Design. Features & Benefits. Newly Patented 100% Back Surface Technology COB – Convex on Back AVI – Automatic Variable Inset AAC in Distance – Advanced Aspheric Compensation - PowerPoint PPT PresentationTRANSCRIPT
New Patented Free-Form Technology SurpassesAll Others in Thinness and Design
Newly Patented 100% Back Surface TechnologyNewly Patented 100% Back Surface Technology
COB – Convex on BackCOB – Convex on Back
AVI – Automatic Variable InsetAVI – Automatic Variable Inset
AAC in Distance AAC in Distance – – Advanced Aspheric CompensationAdvanced Aspheric Compensation
MPAC – Multi-Polar Astigmatic CorrectionMPAC – Multi-Polar Astigmatic Correction
(Patent # 7,341,344 March 8th 2008)
Benefit: Improved CosmeticsBenefit: Improved CosmeticsVs. Other 100% Back Surface PALsVs. Other 100% Back Surface PALs
Flatter BaseFlatter BaseMuch Flatter Plus Rx – Up to 25%Much Flatter Plus Rx – Up to 25% Thinner Minus Rx – Up to10%Thinner Minus Rx – Up to10%
Vs. Conventional PalsVs. Conventional PalsBasically Same On Minus Basically Same On Minus
Reduced Lens Thickness Reduced Lens Thickness Plus lenses up to 25Plus lenses up to 25%% flatter flatterFacilitated by advanced prism thinning Facilitated by advanced prism thinning calculationscalculationsGreatly Improved cosmetic appearance Greatly Improved cosmetic appearance compared to regular back surface PALscompared to regular back surface PALs
Benefit: Improved Intermediate & Reading AreaBenefit: Improved Intermediate & Reading AreaPrestige Original AVI TechnologyPrestige Original AVI Technology
Based on Distance RxBased on Distance Rx Hyperope – Greater ConvergenceHyperope – Greater Convergence Myope – Less ConvergenceMyope – Less Convergence
Based on Specific PDBased on Specific PD Customized Corridor & Add PlacementCustomized Corridor & Add Placement
Future AVI Software UpdatesFuture AVI Software Updates#2 – Specific Reading Distance Measurement#2 – Specific Reading Distance Measurement
##11
Prestige II Prestige II incorporates automatic variable inset design to achieve incorporates automatic variable inset design to achieve point focus for near vision objects. This requires the inset of the point focus for near vision objects. This requires the inset of the
reading zone relative to the distance zone to be extremely precise. reading zone relative to the distance zone to be extremely precise. Taking into account the patient’s PD and the lens power, SEIKO Taking into account the patient’s PD and the lens power, SEIKO
calculates the design needed to give clear binocular vision at the calculates the design needed to give clear binocular vision at the standard 35cm near vision distance.standard 35cm near vision distance.
Benefit:Benefit: Improved Vision Throughout Improved Vision Throughout Totally Clear Above 180° (Uncut Lens)Totally Clear Above 180° (Uncut Lens) Widest Distance Field of VisionWidest Distance Field of Vision Expanded Peripheral VisionExpanded Peripheral Vision Measured Power for Reading and DistanceMeasured Power for Reading and Distance Improved Performance For Difficult RxImproved Performance For Difficult Rx Eye Rotation, Vertex Distance, & Tilt FactoredEye Rotation, Vertex Distance, & Tilt Factored
PRESTIGE IIPRESTIGE IIConventional Back Surface Design
45% Wider 45% Wider DistanceDistance
2.5mm Standard Inset Optimized Inset
Example: SPH -0.00 CYL -2.00 AX 45
Front-side Progressive Lens
PRESTIGE IIPRESTIGE II
Benefit:Benefit: Improved Panoramic Vision Improved Panoramic Vision Listing’s LawListing’s Law Control of Cylinder in All MeridiansControl of Cylinder in All MeridiansReduced Oblique AstigmatismReduced Oblique Astigmatism
As Worn PositionAs Worn Position Adjusted Viewing AngleAdjusted Viewing Angle Eye to Lens Alignment All DirectionsEye to Lens Alignment All Directions
Listing's Law governs the three-dimensional orientation of the eye and its axes of rotation. It states that, when the head is fixed, there is an eye position called
primary position, such that the eye assumes only those orientations that can be reached from primary position by a single rotation about an axis in a plane called
Listing's plane.
SEIKO’s NEW Free-Form Lens Technology benefits from multi-polar astigmatic SEIKO’s NEW Free-Form Lens Technology benefits from multi-polar astigmatic correction. This is calculated using SEIKO software taking into account eye rotation correction. This is calculated using SEIKO software taking into account eye rotation
factors as identified in Listing’s Law. factors as identified in Listing’s Law.
Distortion and oblique astigmatism in the peripheral areas of the lens force the wearer to constantly move their head to maintain a clear image. Prestige II manages
unwanted cylinder in all meridians, creating a balanced progressive design that reduces the need for head movements and increases wearer comfort.
Far power S+CFar power S
Near power SNear power S+C
Newly Patented 100% Back Surface TechnologyNewly Patented 100% Back Surface Technology
COB – Convex on BackCOB – Convex on Back
AVI – Automatic Variable InsetAVI – Automatic Variable Inset
AAC in Distance AAC in Distance – – Advanced Aspheric CompensationAdvanced Aspheric Compensation
MPAC – Multi-Polar Astigmatic CorrectionMPAC – Multi-Polar Astigmatic Correction
(Patent # 7,341,344 March 8th 2008)
SPH-1.00 ADD 2.00 SPH 0.00 ADD 2.00 SPH+1.00 ADD 2.00
Conventional Front Side ProgressiveConventional Front Side Progressive
PRESTIGE IIPRESTIGE II
Visual SummaryVisual Summary
15
AXIS 180° AXIS 45° AXIS 90°
Conventional Front Side ProgressiveConventional Front Side Progressive
PRESTIGE IIPRESTIGE II
Visual Summary: Visual Summary: SPH 0.00 CYL -2.00 ADD 2.00SPH 0.00 CYL -2.00 ADD 2.00
Product MaterialProduct Material Premium Design OfferingPremium Design Offering 1.53, 1.60, 1.67, 1.74 Only1.53, 1.60, 1.67, 1.74 Only Use Same FFSF BlanksUse Same FFSF Blanks
Product Specs - RangeProduct Specs - Range1.501.50
1.53/1.591.53/1.59S +4.00 ~ -5.00/C ± 5.00S +4.00 ~ -5.00/C ± 5.00S +5.00 ~ -7.00/C ± 5.00S +5.00 ~ -7.00/C ± 5.00
1.601.60 S +6.50 ~ -8.00/C ± 5.00S +6.50 ~ -8.00/C ± 5.001.671.67 S +6.50 ~ -10.50/C ± 5.00S +6.50 ~ -10.50/C ± 5.001.741.74 S +6.50 ~ -12.50/C ± 5.00S +6.50 ~ -12.50/C ± 5.00
Add Power 0.50D ~ 3.50D / Prism 0.25∆ ~ 3.00∆Add Power 0.50D ~ 3.50D / Prism 0.25∆ ~ 3.00∆Corridor Lengths/Minimum Fitting Heights: 10/14, 12/16, 14/18mmCorridor Lengths/Minimum Fitting Heights: 10/14, 12/16, 14/18mm
New Patented Free-Form Technology SurpassesAll Others in Thinness and Design