Compact Carbon Fiber Slider

SK-CFS80

Components

Support feet and tube fixer

Support feet and tube fixer

Camera mounting platform

Carbon fiber tubes and tripod mounting plate

80cm

Maximum load capacity: 7kgOverall length: 84cmE�ective working distance: 80cmCarbon fiber outer diameter: 18mmMaterial: Carbon fiber and Aluminum

Specifications

1. Carbon fiber and aluminum construction

2. Light weight and durable

3. Quiet and smooth movement

4. Removable rotating plate

5. Foldable supporting feet

6. Built-in screw socket on carbon fiber tubes

7. Built-in 1/4” and 3/8” threaded screw holes

8. Extandable with extra carbon fiber tubes

Features

Limited One-year Warranty

Sevenoak provides a limited warranty that this product is free

from defects in materials and workmanship to the original

purchaser under normal use for a period of one (1) year from

the original purchase date or thirty (30) days after replaceme

nt (the “Warranty Period”), whichever occurs later. Our respon

sibility with respect to this limited warranty shall be limited

solely to repair or replacement, at its option, of any product

which fails during normal consumer use.

To obtain warranty coverage during the Warranty period,

contact your place of purchase (”Seller”) to obtain a return

merchandise authorization (”RMA”) number, and return to

Seller the defective product along with proof of purchase

and the RMA number.

● Please read and follow these instructions, and keep this

manual in a safe place.

● Handle the unit with care.

● Clean the unit with a soft, dry cloth.

● Use only parts provided by the manufacturer.

● Make sure everything is secure before proceeding.

● Make sure the item is intact and that there are no missing

parts.

● Do not exceed the maximum load capacity.

● All photos are for illustrative purposes only.

Warnings

This warranty does not extend to damage or failure which

results from misuse, neglect, accident, alternation,abuse,

improper installation or maintenance. Except as provided her

ein, sevenoak makes neither any express warranties nor any

implied warranties, including but not limited to any implied

warranty of merchantability or fitness for a particular purpose.

This warranty provides you with specific legal rights, and you

may also have additional rights which vary from state to state.

Instruction:

1. Insert the camera mounting platform onto the carbon

fiber tubes as shown in figure 2. If the camera mounting

platform is not able to be inserted onto the tubes, unscrew

the two screws on the rotating plate as shown in figure 1.

Rotate the plate clockwise to ensure the tubes can go

through, then rotate the plate counter-clockwise till the

wheels and the tubes are in proper position, tighten the

screws.

Rotating plate on camera mounting platform

Rotating plate on camera mounting platform

Note: The rotating plate on camera mounting platform is

adjustable, and it is designed to adjust the position of

the bearings on the rotating plate.

Loosen the locking screwsUnfold the legs

2. Loosen the locking screws on the support feet, unfold the

legs, then tighten the lockings on the support feet again.

3. Loosen the tube fixer locking screw as shown below , insert

one of the tube fixer to one side of the tubes as shown

below, then tighten the tube fixer locking screw.

Tube fixer locking screw

4. Loosen the tube fixer screw as shown below, insert the other

tube fixer to the other side of the tubes as shown below, then

tighten the tube fixer locking screw.

Tube fixer locking screw

5. Adjust the height/angle of the feet according to your desire,

then fix the screws.You can add a tripod ball head (purchased

separately) on to the camera mounting platform which will

allow you to adjust the angle/position of the camera conv-

eniently, then mount the camera onto the tripod ball head, it

is ready to start shooting now.

Mount on a tripod

6. You can use SK-CFS80 standalone, or you can mount it

on tripod or two tripods as shown below, you can even

use it vertically as shown below.

Mount on two tripods

Use it vertically

深圳市长丰影像器材有限公司

SK-CFS80说明书

SK-CFS80说明书V00

刘美华/2016/3/1

1：1 V00

128G双铜 双面 3折页

尺寸：290*216mm 1PCS

产品/零件名称 比例 版本

物料描述

尺寸/用量

审核/日期

工程图号

物料编号

制图人/日期