ne-f900 series training slide in range 1. 2 warranty & specifications features &...

NE-F900 Series trainingNE-F900 Series training

Slide in Range

1

2

Warranty & Specifications

Features & Precautions

Fast Track & Ordering Parts

Diagnostic Mode

Disassembly & Troubleshooting

Table of Contents

• ALL Warranties are subject to change, always verify. • 1 Year Parts & Labor Base Warranty.• Some items may have longer Warranties, Check Owners

Manual or 800-SAMSUNG – Range 5 years on Glass Cooktop and Radiant Surface

Units • No Damage Warranty, Consumer or Stock• One Year, One Call for Consumer Education• Stock Repair, 18 months from date of manufacture• One Stock Repairs allowed under Warranty

Warranty

Specifications

Large Capacity

Self clean and Steam clean

Touch control

Different pot size Burner

Flexcook Zone

4

New Design

Model New(NE58F9710WS) New(NE58F9500SS)Category Convection Convection

Overall Width 30” 30”

Installation type Slide in Slide in

Color availability STS STS

Control Oven Touch Touch

Cook top Knob Knob

Display VFD VFD

Electronic clock Yes Yes

Control lock capability Yes Yes

Audible preheat signal Yes Yes

Cook top Material Ceramic glass Ceramic glass

# of element 5 5

Power LR 7” – 1,800W 6” – 1,200W

RR 6” – 1,200W 6” – 1,200W

CR Warming Center(100W) Warming Center(100W)

LF 7” – 1,800W 9” – 3,000W

RF 12” – 3,000W 12” – 3,000W

Specification

5

Model New(NE58F9710WS) New(NE58F9500SS)Oven Capacity(cu.ft) 5.8 5.8

Broil element 4,200 watts 4,200 watts

Bake element 3,000 watts 3,000 watts

Convection system Yes Yes

Convection element Yes(1,250W/240V) Yes(1,250W/240V)

# of Racks 3 3

Interior oven light 120V,40 watts 120V,40 watts

Cleaning Pyrolytic & Steam Pyrolytic & Steam

Drawer Type Warming drawer NA

Element 600 watts NA

Warming rack No No

Dimensions(inch)

Oven interior (W x H x D) 25 x 21 8/1 x 19 25 x 21 8/1 x 19

Exterior - Width31 (Cook top) : 787mm29 4/5 (Body) : 757mm

31 (Cook top) : 787mm29 4/5 (Body) : 757mm

Exterior - Height 36 (cook top) : 913mm 36 (cook top) : 913mm

Exterior - Depth26 3/10 (Door), : 667.7mm28 3/5 (with handle) : 727.7mm

26 3/10 (Door), : 667.7mm28 3/5 (with handle) : 727.7mm

Net weight : Lbs (Kg) 209 lbs (95Kg) 190.6 lbs (86.5Kg)

Power Rating(240V 60Hz)Range : 5,400W

Cook top : 8,600WRange : 4,700W

Cook top : 8,500W

Specification

6

7


Oven Features

1. Left Front : 7”, 1,800W (Bridge)

2. Left Rear : 7” , 1,800W

3. Right Front : 6”/9”/12” , 3,000W

4. Right Rear : 6” , 1,200W

5. Warming Center : 100W

6. Hot surface indicator

8


Control Panel / Cook Top Features

Common functions1. DISPLAY: Shows the time of day, oven temperature,

whether the oven is in the bake, broil or self-cleaning mode, and the time set for the timer or automatic oven operations.

2. TIMER ON/OFF: Use to set or cancel the minute timer. The minute timer does not start or stop cooking.

3. COOKING TIME: Press and then use the number pad to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

4. DELAY START: Press to set the oven to start and stop au-tomatically at a time you set. (Bake, Conv.bake /Roast, Cooking Time, and self clean only.)

9

5. CLOCK : Use to set the time of day.6. OPTION : Use to bring up the user preference menu in the display.7. LAMP : Press to turn the oven light on or off.8. OVEN OFF : Press to cancel all oven operations except the clock and timer.9. CONVECTION BAKE : Use to select the Convection bake function of the oven.10. CONVECTION ROAST : Use to select the Convection roast function of the single or upper oven.11. BAKE : Used to select the bake function of the single or lower oven. ( F97)12. BROIL : Used to select the broil function of the single or upper oven. ( F97)13. FAVORITE COOK : Use to save or recall a favorite cooking mode.14. TEMP PROBE : Use to activate the temp probe mode.15. KEEP WARM : Use to select the keep warm function of the single oven to keep cooked foods warm.16. SELF CLEAN : Use to select the Self-cleaning function of the single oven.17. HEALTHY COOK : Press to recall the healthy cook recipe setting of the oven.18. BREAD PROOF : Use to select the Bread proof function.19. STEAM CLEAN : Use to select the steam cleaning function of the single oven.20. HI+/LO- : Use to raise or lower the temperature and times.21. NUMBER PAD : Use to set any function requiring numbers such as the time of day on the clock, the timer, the oven temperature,

the start time and length of operation for timed baking.22. CLEAR : Use to cancel previously entered temperature or times.23. OVEN START/SET : Use to start any cooking or cleaning function in the oven.24. CONTROL LOCKOUT : Use to disable all oven function.25. TOUCH TO WAKE-UP : Press to activate button on display.

Features & PrecautionsControl Panel / Oven Fea-

tures

13


Cooling Fan / Main Cooling Motor

1

2

3

Fast Track & Ordering Parts

Download from GSPN

Fast Track

Component Layout

Fast Track

EXAMPLE ONLY!!!This fast track does not pertain to this

model

Schematic / Component Test Chart

Component Voltage Wattage Ω @ Room Temp Component Voltage Wattage Ω @ Room TempLR 240vac 1200 45Ω~50Ω Broil 240vac 3400 W 16 ~ 18ΩRR 240vac 1200 45Ω~50Ω Bake 240vac 2400 W 23 ~ 25ΩLF 240vac 2500 21Ω~25Ω Broil 240vac 3800 W 13 ~ 16Ω

RF or LF Dual 240vac 1200/2500 45Ω~55Ω/23Ω Bake 240vac 3000 W 26 ~ 30ΩRF Triple 240vac 1100/2200/3000 53Ω/26Ω/19Ω Convect 240vac 800 W 70 ~ 73ΩRC Warm 240vac 100 570Ω~580Ω Warm Dr 120vac 600 W 22 ~ 25Ω

Component Voltage Wattage Ω @ Room Temp Degree ºF Ω Degree ºF ΩLR 240vac 6”-1400/2000 0.01~1Ω 0 932.12 104 1151.38RR 240vac 7”-1800/2600 0.01~1Ω 14 961.86 113 1170.17LF 240vac 11”-2400/3700 0.01~1Ω 23 980.95 122 1188.93RF 240vac 6”-1400/2000 0.01~1Ω 32 1000 212 1374.93

41 1019.02 302 1558.01Door Lock Mtr 120vac 1750 ~ 1850Ω 50 1038.02 392 1738.06

Conv Fan 120vac 20 ~ 30Ω 59 1056.99 482 1915.39

Sub Fan 120vac 85 ~ 100Ω 68 1075.92 572 2089.69

Cooling Fan 120vac 29.7Ω 77 1094.83 662 2261.07

120vac (Wht) 75 ~ 80Ω 86 1113.71 752 2429.52

13.5vac (Red) 1.8~2.2Ω 95 1132.56 842 2595.05

8vac (Yel) 0.8~1.2Ω 932 2757.65

Induction Elements

Low Voltage Transformer

Components

Electric Range Components

Oven Temp Sensor Resistance Chart

Burner Elements Oven Elements

E28 Sensor Er-ror

Induction the same

Fast Track

Component Test Chart

Fast Track

EXAMPLE ONLY!!!This fast track does not pertain to this

model

Diagnose with Error codes

Always look for a “Version Number” on all products, if you are looking up parts.Always get the Serial Number on all prod-

ucts. There are “Running Changes” that have

“Bulletins” referring to part number changes at a production Serial Number. ”

Ordering Parts

Critical Parts Look-Up

Many Ranges have Version changes, this must be checked before troubleshooting or ordering parts

Ordering Parts

Diagnostic Mode

There is a error code and two kinds of error codes. Possible error codes during use can be checked before service.

1. Touch ‘Clock’ key.

2. Touch a number ‘1,2,3,4’ keys.

3. Touch ‘Oven Start / Set’ key.

4. Touch ‘ Favorite Cook’ and ‘Wake-up’ keys at the same time for 3 seconds. Error codes are displayed.

5. Touch number ‘0’ key, the last 5 error codes can be checked. But, if the oven turns off, the stored error codes are deleted.

6. Touch ‘Oven Off’ key to return to normal display mode.

21

Entering Diagnostic Mode

Front Display Panel

22


23

Sub PCB

Sub PCB


24

TE400 CN400 CN200 CN502

TE400 This is connector which is connected with Main PCB to communicate.

CN400When do micom revision, connect to micom writer.(No connection at normal times)

CN200When do micom revision, connect to micom writer.(No connection at normal times)

CN502 This is connector which is connected with cooktop and Main cooling motor.

COOLING MOTOR and Fan

Sub PCB & Cooling Fan


25

TCO


Access to Main PCB

26


CN101 This is to supply power with SMPS.

CN201 This connector is used to communicate with the Sub PCB

CN202 When do micom revision, connect to micom writer. And this connector which is con-nected with Touch PCB to communicate.

CN301 This connector which is connected with oven sensor.

CN401 This is connector which is connected with Door plunger switch and Door lock switch, partition switch.

CN501 This connector which have Door plunger switch, upper lamp andrelay of upper convection fan connected.

CN502 This connector which have lower lamp and relay of lower convection fan connected.

RY-SourceRelay(RY501)

This is relay which control source of DLB,BAKE,BROIL, W/Drawer relay.

DLB Relay(RY502) Circuit is designed to have broil relay or convection relay worked after DLB relay isbeing worked by Double line break. (It will not be problem with reversing the order ininserting Red)

Broil Relay(RY503),Bake Relay(RY504),

Convection Relay(RY505)

Broil relay(Ry503), Bake relay(Ry504), convection relay(Ry505) will be on-offworking by mi-com signal after DLB relay is worked.(Broil relay : It will not be problem with reversing the order in inserting Brown)(Bake relay : It will not be problem with reversing the order in inserting Blue)

W/Drawer Relay(RY506)

This is relay to control Warming Drawer-Heater.

IC102 This is to supply DC 12V with main PCB by voltage regulator. 27

Main Board Connector Lay-out


28


• Measure the state of micro switch and motor after taking off harness from the heater.• Check whether the lock works normally by pressing Cooking Time and Delay Start at the same time for 3 seconds.

* Lock motor Resistance : 2500 ~ 2700Ω Voltage : 120V* Micro switch COM-NO• Replace or repair if harness is loose or disconnected.

Failure code CAUSE SOLUTION

E-0E Door locking error

*Control lockout (press Cooking Time and Delay Start pads at the same time for 3 seconds.)

When 1 minute elapsed, the range will display “E- 0E” after the buzzer beeps 10 times if locking occurs continually, or if the door lock is not working during self-cleaning or steam is being operated.

OVEN DOOR LATCH

29


• Measure resistance of the heater after removing the wiring harness from heater.• Measure voltage at heater’s terminal after pressing the bake function key-pad.(Make sure that voltage is measured for more than 1 minute because the heater cycles on-off when working. Measuring a voltage merely verifies that the main PCB is working, not the heater.)

* Approx : 26 ~ 30Ω (at the room temperature)* Terminal voltage of bake heater : AC 240V* Replace or repair harness

BAKE HEATER

30


• Measure the resistance of the heater after re-moving the wiring harness from the heater.• Measure voltage at the heater’s terminal after pressing broil function on the keypad.

* Approx : 13 ~ 16Ω (at the room temperature)* Terminal voltage of Broil heater : AC 240V* Replace or repair harness

BROILER HEATER

Measuring the voltage at the heating element will only verify that the main board is outputting the voltage, not that the heater is working

31


Broil Element WireHow do you fix?


• Measure the resistance of the heater at the terminal after removing the wires from the heater.• Measure the voltage at the heater’s terminal after turning on the oven by pressing the convection bake function on the keypad.

Make sure that voltage is measured for more than 1 minute because the heater cycles on-off when working.

• Approx : 70 ~ 73Ω • Terminal voltage of convection heater : AC 240V* Replace or repair harness* Replace or repair sub PCB

CONVECTION HEATER

Measuring the voltage at the heating element will only verify that the main board is out-putting the voltage, not that the heater is working 33


Degree ºF Resistance Ω

0 932.12

14 961.86

23 980.95

32 1000.00

41 1019.02

50 1038.02

59 1056.99

68 1075.92

77 1094.83

86 1113.71

95 1132.56

104 1151.38

113 1170.17

122 1188.93

212 1374.93

302 1558.01

392 1738.06

482 1915.39

572 2089.69

662 2261.07

752 2429.52

842 2595.05

932 2757.65

1000 2878.57

OVEN TEMPERATURE SENSOR

Temperature / Resistance Chart

The oven sensor is considered to be open if it measures > ~2950Ω

The oven sensor is con-sidered to be shorted if it

measures < ~930Ω

34


TEMPERATURE SEN-SOR

35

Failure code CAUSE SOLUTION

E-27Oven sensor open

(when it measures > ~2950Ω)

1. Disconnect power. Open the back covers.2. Disconnect the sensor harness and mea-

sure the sensor resistance: ~1080Ω at room temperature

3. If there is no problem with the oven sensor, check whether there is a damaged connector or wire harness.

E-28Oven sensor shorted.

(when it measures < ~930Ω)


Partition Switch

36

* Measure the state of partition

switch after taking off harness.

Partition Switch

Resistance : 1750 ~ 1850Ω

* Replace or repair if harness has

been loosen or disconnected


• Measure the resistance of the heating element after taking off harness from heater.• Measure the terminal voltage of heater after turning on the oven by pressing the warming drawer keypad.

* Approx : 22 ~ 25Ω (at the room temperature)* Terminal voltage of Drawer heater : AC 120V* Replace or repair harness* Replace or repair sub PCB

WARMING DRAWER HEATER

Measuring the voltage at the heating element will only verify that the main board is out-putting the voltage, not that the heater is working


CONVECTION ELE-MENT

Bracket convection heater

38


Convection Fan : 20 ~ 30Ω* Terminal Voltage of Convection Fan : 120V

ne-f900 series training slide in range 1. 2 warranty & specifications features &...

Documents