nbp 16 pg brochure - nilesbldg.com · nniles building productsiles building products 330-544-0880...
TRANSCRIPT
Niles Building ProductsNiles Building Products 330-544-0880 • 880-323-3329 • Fax 330-544-8868 • www.nilesbldg.comNILES BUILDING PRODUCTS RECOMMENDS THE USE OF ZINC ACCESSORIES FOR ALL EXTERIOR APPLICATIONS
** PALLET WEIGHTS MAY VARY
C O L D R O L L E D C H A N N E L , F L A T S T O C K , C O R N E R A N G L E
Cold Rolled Channel
Flat Stock
Corner Angle
AVAILABLE IN 16 GAUGE 20 BUNDLES/PALLETCold Rolled Channel is most commonly used as a bridging method to provide bracing in metal framing systems.Note: Cold Rolled Channel will not provide adequate bracing if not properly attached to the framing member.
AVAILABLE IN 16, 18, 20 & 25 GAUGE 20 BUNDLES/PALLETFlat stock is used for lateral & diagonal bracing to provide support in metal framing systems.
SIZE
3/4”
3/4”
1-1/2”
1-1/2”
LENGTH
10’
16’
10’
16’
PCS/BUNDLE
20
20
10
10
WEIGHT/BUNDLE
50 LBS.
80 LBS.
45 LBS.
75 LBS.
WEIGHT/PALLET
1000 LBS.
1600 LBS.
900 LBS.
1500 LBS.
AVAILABLE IN 25 & 20 GAUGE50 BUNDLES/PALLETThe Niles 90 degree Corner Angle is most commonly used in lapped framing conditions as well as fl oor & ceiling runners, soffi t framing and wallboard partitions.
SIZE LENGTH PCS/BUNDLE
1-1/2” x 1-1/2” 10’ 10
2” x 2” 10’ 10
3” x 3” 10’ 10
SIZE LENGTH PCS/BUNDLE
2” 10’ 10
4” 10’ 10
6” 10’ 10
8” 10’ 10
Niles Building ProductsNiles Building Products 330-544-0880 • 880-323-3329 • Fax 330-544-8868 • www.nilesbldg.comNILES BUILDING PRODUCTS RECOMMENDS THE USE OF ZINC ACCESSORIES FOR ALL EXTERIOR APPLICATIONS
N I L E S C A S I N G B E A D S
NILES NO. 66-X CTNS/ NOMINAL NOMINALEXPANDED FLANGE PALLET LBS/CTN WT/PALLET**1/4” gr. Galv. 42 41 17221/4” gr. Zinc 42 43 18063/8” gr. Galv. 42 41 17223/8” gr. Zinc 42 43 18061/2” gr. Galv. 42 41 17221/2” gr. Zinc 42 43 18065/8” gr. Galv. 42 48 20165/8” gr. Zinc 42 47 19753/4” gr. Galv. 42 48 20163/4” gr. Zinc 42 47 19757/8” gr. Galv. 42 48 20167/8” gr. Zinc 42 51 21421” gr. Galv. 42 48 20161” gr. Zinc 42 51 21421-1/4” gr. Galv. 40 50 20001-1/4” gr. Zinc 40 54 21601-1/2” gr. Galv. 40 55 22001-1/2” gr. Zinc 40 61 2440
30 PCS./CTN. - 300 FT./CTN.
NILES NO. 66N CTNS/LONG FLANGE PCS./CTN PALLET
3/8” 30 421/2” 30 423/4” 30 427/8” 30 421” 30 421-3/8” 30 401-1/2” 30 40
300 FT./CTN.
NILES NO. 66-N CTNS/ NOMINAL NOMINALSHORT FLANGE PALLET LBS/CTN WT/PALLET**3/8” gr. Galv. 42 41 17223/8” gr. Zinc 42 43 18061/2” gr. Galv. 42 41 17221/2” gr. Zinc 42 43 18063/4” gr. Galv. 42 48 20163/4” gr. Zinc 42 47 19757/8” gr. Galv. 42 48 20167/8” gr. Zinc 42 51 21421” gr. Galv. 42 48 20161” gr. Zinc 42 51 21421-1/4” gr. Galv. 42 50 21001-1/4” gr. Zinc 42 54 22681-1/2” gr. Galv. 42 55 23101-1/2” gr. Zinc 42 61 2520
30 PCS./CTN. - 300 FT./CTN.*SPECIAL ORDER ONLY. MINIMUM QUANTITIES APPLY.
*
*
*
*
*
**
*
Used to effectively terminate plaster edge and/or to separate stucco from all other structural membranes at doors, windows, and other openings; also when plaster/stucco meets dissimilar material. Expanded fl ange provides excellent stucco embedment at the junctions of the bead and metal lath.
Also available with punched grounds upon request.
Caution: 66X Casing Beads w/punched grounds should not be used as a substitute for foundation weep screeds in a 3 coat stucco system.
Niles No. 66-X Expanded FlangeCasing Bead
Niles No. 66N, Long Flange (J-Weep)
3-1/2 Flange
Available in Zinc - Contact Plant for Details
Niles No. 66N, Short Flange
The choice where short, solid flanges are preferable. Also available with punched grounds.
** PALLET WEIGHTS MAY VARY