national power contols
TRANSCRIPT
NATIONAL POWER CONTOLS
Company Profile
01/04/2015
NPC History
• Company started by Mr. Devraj B.Pipalia back in 1990’s
• 25 years of experience in manufacturing of electrical control panels
• 5 years in electrical works for HVAC system.
• 4 years of experience in solar systems (roof tops, street lights, AC Evac.)
• Experience in private as well as government project.
Statutory Registration Of NPC
• VAT TIN NO: 27030087571V w.e.f 1/4/2006
• CST TIN NO: 27030087571C w.e.f 1/4/2006
• PAN NO: AACPP4419J
• SSI Registration NO: 11/07/23304/PMT/SSI dated 02/06/1998
• Name of Bank: HDFC Bank-Goregaon branch
• Service Tax Registration No: AACPP4419JST001
Our clients
Reliance InfrastructureLimited
BARC DoT MTNL
Voltas Limited Reliance Industries Limited
Lupin Agog Pharma
Batliboi Ltd. Mahindra & Mahindra Refex Energy JW Marriot
Associated Capsule Ltd. Blue Star Ltd. NFDC Limited (film industry) Sahara India Commercial Corp.
Kwatt Solutions Pvt. Ltd IIT Bombay Hindustan Dorr-Oliver Ltd.
Lloyds Steel Industries
L&T Refex Energy (solar) VKE valves Limited SEW engineering Limited
SVC bank JSW Metro HVAC solutions Brit Soap Machinery
Our Expertise
Retrofit lightings (gHID) Solar rooftop systems Solar street light AC evacuation of Solar fields
Feeder pillars for street lights
APFC panels Instrumentation Panels Annunciation Panels
SCADA Panels Protections SupplyBoards
Bus Ducts PLC Panels
Fully Draw out type MCC
Our Projects
Feeder Pillar for Hindalco
AnnunciationPanel for BARC
Circuit Breaker Panel Voltas
Our Projects contd.
Process Panel at Chemical Industry
Solar Plant @ Bikaner APFC Panel for L&T
Our Projects contd.
Chemical Plant Panel
PCC 2 for L&T
PCC 1 For L&T
Our Projects contd.
32A, Single Phase
32A, 3Ph Power Protection
Fully Draw OutType MCC
Close up view of Fully Draw OutType MCC
Solar Street light
Solar Street Light @ SilvassaSolar Street Light Lux flow
Our Design for Solar Street light
Introduction
• Recognizing a large opportunity to provide the most cost effective customer-friendly energy efficiency solution in the commercial/industrial lighting market, Genesys developed and patented its gHID Technology.
• The design (co-created with end-users) addresses all customer “pain points” associated with high bay indoor and outdoor lighting and caused by less efficient/unsophisticated technologies that exists in today’s infrastructure.
Benefits• gHID,, Genesys innovative technology and solutions focuses in the end users wants/needs to provide green,
energy efficient, sustainable lighting with significant energy savings (immediate and quantifiable) from day one while providing the same or better area lighting quality (enhanced CRI- whiter)
• Creating their technology and product breadth by collaborating with their customers, Genesys Solution ensures that the customers gets their solution for its lighting needs
• By enhancing the time proven area lighting capabilities of HID (high intensity discharge lighting) the Genesys technology provides superior area lighting over other technologies.
Most LED products cannot perform in high bay indoor and outdoor applications and those that can are far too expensive for many companies.
Unlike LED’s which create heat and are poor at spreading light, gHID allows the most efficient use of your electricity for creating quality light at ground level.
gHID’s robust design addresses many of the most common points of failure found in LED solutions (driver, LED’s Microprocessors, etc)
Benefits contd.
Summary
• Immediate and quantifiable energy savings(not including maintenance saving)70% + energy saving on outdoor lighting (1000W to 320W)55%+ energy saving on indoor lighting (400W to 200W)
• Improves light QualityHigh CRI (brighter/whiter light)Consistent lightingLess than 20% degradation over life of lamp (standard HID looses 40%)
• Rapid Installation Process with no customer disruption• Dramatically reduce ongoing maintenance cost
Extends lamp life 2 – 3xExtend ballasts life 3-4xWarranty coverage for 2 years ( low cost annual plan available)
• Return on investmentPayback almost always less than 1 year for the application over 400W(based on 0.10$/KWhelectricity rates and 10 hours burn/day
Thank You
For NPC
Bhumit Pipalia