n e l w! large flange listed box extenders · • complies with nec 2017, article 314.20 for set...

Arlington’s non-conductive box extenders extend set back metal or non-metallic electrical boxes up to 1-1/2 inches, the easy way! They work with any single gang device and most steel and non-metallic outlet boxes, providing a level, fully supported wiring device that’s flush with the wall surface. In steel boxes they prevent arcing and shorting by creating a barrier between the box and device screws. Now available in three- or four-gang, our newest box extenders have a slightly larger flange that provides extra device support when the wall opening is miscut or oversized. They accommodate midi or jumbo cover plates – and they’re trimmable along the perforated flange for use with standard plates. Best of all they cost the same as our ‘regular’ flange box extenders. If you normally use a midi plate these are the box extenders for you! • Complies with NEC 2017, article 314.20 for set back boxes • 2-hour fire rating Large Flange Listed Box Extenders NEW! Larger flange THE Answer to Set Back Electrical Boxes – Now in 3 and 4-Gang! Solves problem of set back boxes, miscut holes Made in USA BE1 BE1X Larger flange Trims to fit standard wall plates Patented/Additional patents pending Larger perforated flange for better device support... NEW! THREE-Gang• FOUR-Gang 1 Stauffer Industrial Park Scranton, PA 18517 800/233.4717 • Fax 570/562.0646 www.aifittings.com BE3X BE3X Catalog UPC/DEI/NAED Description Std Number Mfg. #018997 LARGE FLANGE BOX EXTENDERS Pkg BE1X 40171 Single-gang with larger flange 25 BE2X 48973 Two-gang with larger flange 25 BE3X 48974 Three-gang with larger flange 10 BE4X 48975 Four-gang with larger flange 10 Works in handy boxes and 4" square electrical boxes with plaster rings for a single switch or receptacle. Functions with all standard devices, switches and GFCIs. NEW! NEW! SAME COST as our ‘Regular Flange’ box extenders! BE3X BE4X BE1X BE2X

Upload: others

Post on 07-Nov-2019

0 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: N E L W! Large Flange Listed Box Extenders · • Complies with NEC 2017, article 314.20 for set back boxes • 2-hour fire rating Large Flange Listed Box Extenders N E W! L a r g

Arlington’s non-conductive box extendersextend set back metal or non-metallicelectrical boxes up to 1-1/2 inches, the easy way!

They work with any single gang deviceand most steel and non-metallic outletboxes, providing a level, fully supportedwiring device that’s flush with the wallsurface. In steel boxes they preventarcing and shorting by creating a barrierbetween the box and device screws.

Now available in three- or four-gang,our newest box extenders have a slightlylarger flange that provides extra devicesupport when the wall opening is miscutor oversized. They accommodate midi orjumbo cover plates – and they’retrimmable along the perforated flangefor use with standard plates. Best of allthey cost the same as our ‘regular’flange box extenders. If you normallyuse a midi plate these are the boxextenders for you!

• Complies with NEC 2017, article 314.20 for set back boxes

• 2-hour fire rating

Large Flange Listed Box Extenders

NEW!

Larger flange

THE Answer to Set Back Electrical Boxes – Now in 3 and 4-Gang!

Solves problem of set back boxes, miscut holes

Made in USA

BE1BE1X

Larger flangeTrims to fit standard wall plates

Patented/Additional patents pending

Larger perforated flangefor better device support...

NEW!THREE

-Gang•FOUR

-Gang

1 Stauffer Industrial ParkScranton, PA 18517800/233.4717 • Fax 570/562.0646www.aifittings.com

BE3X

Catalog UPC/DEI/NAED Description Std Number Mfg. #018997 LARGE FLANGE BOX EXTENDERS Pkg

BE1X 40171 Single-gang with larger flange 25

BE2X 48973 Two-gang with larger flange 25

BE3X 48974 Three-gang with larger flange 10

BE4X 48975 Four-gang with larger flange 10

Works in handy boxes and 4" square electrical boxes with plaster rings for a single switch or receptacle. Functions with all standard devices, switches and GFCIs.

NEW!NEW!

SAME COST as our ‘Regular Flange’ box extenders!

BE3X

BE4X

BE1X BE2X

Page 2: N E L W! Large Flange Listed Box Extenders · • Complies with NEC 2017, article 314.20 for set back boxes • 2-hour fire rating Large Flange Listed Box Extenders N E W! L a r g

LEAVE ONoutside flange

No three or four-gang Box Extenders on the truck? No problem!

BE1

Regular Size Flange Listed Box ExtendersExtend set back metal or non-metallic electrical boxes up to 1-1/2"

Made in USA

Distributed by

4 Arlin

gton Ind

ustrie

s, Inc

. / RE

V 2018

BE4BE3

Catalog UPC/DEI/NAED Description StdNumber Mfg. #018997 ‘REGULAR’ FLANGE BOX EXTENDERS Pkg

BE1 40160 Single-gang 25

BE2 48960 Two-gang 25

BE3 48967 Three-gang 10

BE4 48968 Four-gang 10

Works in handy boxes and 4" square electrical boxes with plaster rings for a single switch or receptacle. Functions with all standard devices, switches and GFCIs.

BE1R 40160 Fits 3-1/2" and 4" round or octagonal ceiling boxes. 25 Trimmable for shallow boxes or obstructions

BE2

BE1 Single gang box extendersare trimmable for use in multipleboxes.

LEAVE ONoutside flange

Patented/Additional patents pending

BE1R

1 Stauffer Industrial ParkScranton, PA 18517800/233.4717 • Fax 570/562.0646www.aifittings.com

BE1R

CUT THE FLANGES OFFthe inside box extender(s)

BoxExt 12/18 25M

W! UL/CSA Listed Box Extenders - Graybar · box extenders. DO cut the flanges off both sides of “inner“ BE1 box extender(s). No BE3 or BE4 Box Extenders on the truck? No worries!

LWE120 Wireless Ethernet Extenders