mx43 gas detector

2
Oldham MX43 Gas Detection Control Panel The MX43 is an analogue and digital controller designed for continuous measurement and control of present gases Controller Presentation Available 4-channel version (wall-mounting) or 8-channel version (rack and wall-mounting The MX43 is both analogue and digital so it can be used with either: 4-20 mA analogue transmitters (iTrans, OLCTxx) Digital transmitters such as existing OLCT80 or OLCT10N Applications Boiler room, food industry, charger or cooling room, steel mills, waste water treatment, petrochemical, automotive plants KEYBENEFITS Front panel LEDs allow a quick and basic overview of the installation. Showing 32 detectors distributed across 8 lines. Large graphic display shows 7 status values Smart keys make embedded menus simple to use MX43 covers digital and analogue channels, covering all needs for a wide variety of applications The MX43 offers a simplified procedure that enables time and cost savings

Upload: a1-cbiss

Post on 26-Jun-2015

66 views

Category:

Technology


4 download

DESCRIPTION

Discover the Mx43 gas detection and monitoring appliance in this data sheet prepared by a1-cbiss

TRANSCRIPT

Page 1: Mx43 Gas Detector

Oldham MX43Gas Detection Control Panel

The MX43 is an analogue and digital controller designed for continuous measurement and control of present gases

Controller Presentation

Available 4-channel version (wall-mounting) or 8-channel version (rack

and wall-mounting

The MX43 is both analogue and digital so it can be used with either:

• 4-20 mA analogue transmitters (iTrans, OLCTxx)

• Digital transmitters such as existing OLCT80 or OLCT10N

Applications

Boiler room, food industry, charger or cooling room, steel mills, waste

water treatment, petrochemical, automotive plants

KEYBENEFITS• Front panel LEDs allow a quick and

basic overview of the installation.

Showing 32 detectors distributed

across 8 lines.

• Large graphic display shows 7 status

values

• Smart keys make embedded menus

simple to use

• MX43 covers digital and analogue

channels, covering all needs for a

wide variety of applications

The MX43 offers a simplified procedure that enables time and cost savings

“ “

Page 2: Mx43 Gas Detector

TECHNICALSPECIFICATION

DIMENSIONS • Wall mounted: 370 x 299 x 109 mm (14.6 x 11.8 x 4.3”)

• Rack: 19”, 4U ; 482.8 x 177 x 192.5 mm (19.1 x 7 x 7.6”)

• Cable Entries :12 M16 cable glands, 4 to 8 mm²

6 M20 cable glands, 6 to 12 mm²

DISPLAY• LCD back-lit display + smart keys

• Display in video inverse in case of fault

• Customisable by user (display 1 to 16 channels

simultaneously, fixed or scrolling, on events.)

• Bar graph with alarm threshold

OPERATING USE• Operating temp: 20°C to +50°C

• Storage temp: 20°C to +50°C

• Humidity: 5 to 95% RH

• Power:100-240 Vac 50-60 Hz or 21-28 Vdc, 112 W

• Battery: Embedded back up power supply in option

• Consumption: 500 mA min (without module)

MEASUREMENT LINES• Digital lines: 8 maximum RS-485 communication, proprietary protocol 2 twisted shielded-pair cable

• Analog channels: 8 maximum 0-23 mA analogue signal input 120 Ohm load resistance

• Voltage: 21 to 28Vdc

APPROVALS • EMC according to EN50270

• ATEX: EN50271 and metrological performances according

to EN60079-29-1

• Low voltage directive: According to EN61010

Analogue Detectors

MX43External

power suppy

USB

Analogue Recorders

16-logic-input module

2 logic inputs

4-analog-output module

8-relay module

Configuration PCwith COM43 application

8-analogue-inputsmodule

Digital Detectors

4-relay module

Analogue SignalDigital Signal

CONFIGURATIONEXAMPLE

Cert No. 996ISO 9001

11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HTT: +44(0)151 666 8300 F: +44(0)151 666 8329 E: [email protected] W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com