mw100 viewer software - yokogawa electric...mw100 viewer software mw100...
TRANSCRIPT
Notice of Alterations
All Rights Reserved. Copyright © 2013, Yokogawa Electric Corporation
MW100 Viewer SoftwareMW100 ビューアソフトウエア ユーザーズマニュアル
IM MW180-01Z1-S01 P.1/42nd Edition Sep., 2013
EnglishPlease make the following alterations to the User's Manual.
Page i "Notes" <Change>Note the change of the underlined portion
• This manual describes release number “R3.04.01” of the MW100 Viewer Software.
Page 1-4 "1.2 System Requirements" <Add>Note the addition of the underlined portion.
Operating System (OS)• Windows 8 (32-bit and 64-bit edition) (Supports the desktop mode)• Windows 8 Pro (32-bit and 64-bit edition) (Supports the desktop mode)
PC• When Using Windows 7 or Windows 8
Page 2-3 "2.2 Setting Item Details" <Add> Page 4-2 "4.1 Connecting the MW100 Data Acquisition Unit" <Add>
Note the addition of the underlined portion.
NoteIf your OS is Windows XP, Windows Vista, or Windows 7 or Windows 8 and the firewall is enabled, it may notbe recognized even if you click the Search button.
Page 5-2 "5.1 Troubleshooting" <Add>Note the addition of the underlined portion.
Probable Cause Corrective Action/Description ReferencePagePC and the MW100 are not in the same segment.
When using Windows XP, Windows Vista, or Windows 7, or Windows 8, check the firewall function.
2-3, App-1
IM MW180-01Z1-S012nd Edition
2/4
All Rights Reserved. Copyright © 2013, Yokogawa Electric Corporation 2013.09.-00
PageApp -11 "Appendix 1 Configuring/Removing the Firewall” <Add>Note the addition of the following after “On Windows 7”.
On Windows 81. Open the Desktop.
2. Right-click on the display. Open the Personalize.
3. Click the Control Panel HomeThe Control Panel appears.
4. Follow the same procedure as the one in step 2 of "On Windows 7" (page App-7).
IM MW180-01Z1-S012nd Edition
3/4
All Rights Reserved. Copyright © 2013, Yokogawa Electric Corporation 2013.09.-00
Japaneseお手数ですが、お手元のユーザーズマニュアルを下記のように変更してお使いください。
■ i ページ 「ご注意」への変更下線部を変更してください。
● このマニュアルでは、リリースナンバー「R3.04.01」の MW100 ビューアソフトウエアについて説明しています。
■ 1-4 ページ 「1.2 必要な PC システム環境」への追記下線部を追加してください。
オペレーティングシステム (OS)・ Windows 8(32 ビット版、64 ビット版)(デスクトップモードに対応)・ Windows 8 Pro(32 ビット版、64 ビット版)(デスクトップモードに対応)
PC 本体・ OS が Windows Vista、Windows 7、または Widows 8 の場合
■ 2-3 ページ 「2.2 設定項目詳細」への追記と削除 4-2 ページ 「4.1 MW100 データアクイジションユニットの接続」への追記
下線部を追加してください。
NoteOS が Windows XP、Windows Vista、または Windows 7、または Widows 8 の場合、ファイアウォール機能が有効になっていると、[探す]ボタンをクリックしても認識しないことがあります。
■ 5-2 ページ 「5.1 故障 ? ちょっと調べてみてください」への追記下線部を追加してください。
考えられる原因 対処方法 参照ページPC と MW100 が同一のセグメント内にない。
PC の OS が Windows XP、Windows Vista、またはWindows 7、または Windows 8 の場合、ファイアウォールの機能を確認してください。
2-3、付 -1
■付 -11 ページ 「付録 1 ファイアウォールの設定 /解除方法」への追記「Windows 7 の場合」の後に、以下を追加してください。
Windows8 の場合1. デスクトップ画面を開きます。
IM MW180-01Z1-S012nd Edition
4/4
All Rights Reserved. Copyright © 2013, Yokogawa Electric Corporation 2013.09.-00
2. 画面上で右クリックして個人設定を開きます。
3. コントロールパネルホームをクリックします。コントロールパネルが表示されます。
4. 以降の操作は、Windows 7 の場合(付 -7 ページ)の操作 2 からと同じです。