Multiple Partitions on USB Stick Storage External Hard Drive.

This tutorial will allow you to create partitions on any USB Stick storage or External Hard

Drive

You will need:

Hack Windwos Multi Partition USB Driver.zip

Access DEVICE MANAGER:

Start > Run > devmgmt.msc Or

My Pc > Right Click > Properties > Hardware > Device Manager...

Follow the instruction by the numbers on the Picture... At 6th step, Make a exactly note of the selected area, Using Notepad

Example: USBSTOR\Disk&Ven_Kingston&Prod_DaraTraveler_2.0&Rev_PMAP

Select and copy created note, of your Device Instance ID

Now unzip the downloaded file to your desktop and open cfadisk.inf in Notepad

Replace all selected parts in the image, by the one you have copied from the Notepad Then File > Save…

File > Exit…

Now Access DEVICE MANAGER:

Start > Run > devmgmt.msc Or

My Pc > Right Click > Properties > Hardware > Device Manager...

Follow the instruction by the numbers on the Pictures...

Important: when presses BROWSE, you have to locate your unzipped files (cfadisk.inf and cfadisk.sys) And select “cfadisk.inf”

In this case the files are located on the Desktop…

Just follow the picture…

After pressing Yes, Wait a moment when the driver is being installed! Restart the computer after the installation is recommended.

……

You are done! Congratulation! Now you will see your USB Stick Storage as LOCAL DISK

That’s mean, now you can make any number of partitions with different format too if you like (FAT 16, FAT 32, NTFS, EXT2 {Only Linux} etc…) and Windows will recognize them all, as LOCAL DISKS

If you don’t have any Partitions program, so that’s no problem My Pc > Right Click > Manage… Storage > Disk Management …

Localize your External Drive (Normally by the Label or Drive letter) Now backup all your data on the USB Stick Storage or External Hard Drive….

(Make sure that’s the USB Stick is Selected, not the System Disk “C” or “D” normally) Then delete partition

Then create partitions as you like!

All right reserved to Victory™ 2009/04/12