lumber for basement partitions. material for basement partitions
TRANSCRIPT
Lumber for basement partitions
Material for basement partitions
Drain access for the shower
Deciding where the center partition will be located – the easy way before building the wall
Typar the basement walls first
The bottom plate on a sill gasket screwed to the concrete with a 1” space behind
Rigid insulation against the old concrete foundation
Setting the bottom plates for partitions – this is where the photos of the heat tubes comes in to play before attaching
The sewage pump container
Exterior stud walls
Cardboard for the work benches
That would be Dave
It’s cold upstairs – we try and keep the heat in the basement where we’re working
The lid was covered with Typar to keep the concrete out
Lots of blowing snow in Carlow
The boys created this snow toilet one evening and brought it to work and assembled it at lunch
An outdoor “ John “ complete with toilet paper roll
‘Pop’ comes to see
Step flashing against the existing brick
Mild spell – toilet melted leaving only the nuts holding it down
A Mennonite on the way to town
I was coming out of the garage and heard the horse on the pavement
Insulating the porch floor
Rigid insulation over Roxul
Plywood to seal the underside
Basement partitions taking shape
A bright new day
Plumber arrives to rough in the basement bathroom and work on the in floor heating system
The plumber has a microwave for lunches
Someone has been tardy getting to work so I created a ‘Bayfield-Carlow’ bus schedule to drive home the point
Removing the sliding garage doors
We will use most of the old materials