multi-fuel boilers your renewable energy source...
TRANSCRIPT
www.deckerbrand.com
Decker Brand BoilersMulti-fuel Boilers your renewable energy source
• pressure boiler • fully certified • environmentally friendly• high efficiency • biomass • biofuel • innovation • reliability
Fabworks Inc.General Delivery
Decker MB, R0M 0K0Canada
phone : (204) 764-2861cell: (204) 412-0234
Manufactured by Fabworks Inc. MB
Heating with Biomass and/or fossil fuelsWood pellets, Oat Hulls, Switch Grass Pellets, Peat
Moss Pellets, Coal, Natural Gas, Propane Gas
Heating Automated Boiler system for: Commercial, Industrial, Communal and Residential
Applications
Auger
Fuel Bin
Boiler
Multi-clone Dust Collector
Ash Auger
Decker Brand Boiler
System Flow
FUEL TYPEFuel Type Units BTU UnitNatural Gas Cubic Metre 35,310Bulk Propane Litre 24,175Heating Oil Litre 36,740Propane Litre 26,058Electrical Kilowatt Hour 3,413Coal
Anthracite per lbs 14,000
Subbituminous per lbs 8,000
Bituminous per lbs 8,900
Lignite per lbs 7,000
Peat pellets (dry) per lbs 7350Peat (raw) per lbs 6165Raw biomass per lbs 7,000
Pine Wood Pellets per lbs 7,000
Oat Hulls Pellets per lbs 7,200
Switch Grass Pellets per lbs 7,800
The pressurized industrial DECKER BRAND BOILER is designed to heat facilities such as greenhouses, manufacturing plants, livestock facilities and machine shops. We strive to produce the cleanest burning boiler in the industry saving you up to 90% on your current heating bill. DECKER BRAND BOILERS are certified and go through strict emission testing designed to exceed government industry standards and keep our air as clean as possible. This economical, environmentally friendly, low maintenance heating system will provide you with years of virtually trouble-free service.
FEATURES• Designed for multi-fuels including, biomass, biofuels, wood pellets, oat hull pellets and coal• Six sizes available: 230,000 to 12,000,000 BTU• Up to 85% efficient (efficiency test reports available) • Increase efficiency up to an additional 10% with Decker Brand Economizer• Limited manufacturer’s warranty• Automated tube cleaning system for maximum efficiency• Automated ash removal system• Environmentally friendly (emission test results available) • Fully insulated • Standard built-in alarm system• PLC touch control system available• Can be installed in series to meet any BTU requirement• Engineering or designing of complete heating systems available• One boiler can heat several buildings• North American Certification• TÜV pending
The DECKER BRAND STOKER is fabricated to the highest quality standards . Each size of stoker comes complete with a PLC variable speed gear drive and direct drive blowers. The larger boilers are provided with longer stokers to accommodate larger bins for increased fuel storage.
We can supply your entire heating system including engineering system, certified boiler installation, boiler start-up, operator training and worldwide 24-hour emergency phone and online support. We offer competitive pricing on all heating equipment including: heat exchanger, pre-insulated pex pipe, pumps and unit heaters. Complimentary estimates are available.
Manitoba Labour Mechanical and Engineering
Travail Manitoba Mécanique ettechnique
DECKER BRAND BOILERS
DBB84
Decker Brand B o i l e r s
Model #
DBB84
DBB60
DBB55
DBB50
DBB42
DBB36
DBB30
TITAN 1
TITAN 2
Model # BTU RatingHorsepower
(HP)Kilowatt
HourMega Watt
Approx. Shipping
Weight (KG)
Approx. Shipping
Weight (Lbs)
Height (cm)
Height (in)
Diameter (cm)
Diamter (in)
DBB84 12,000,000 358 3516 3.52 27,669 61,000 451 178 1036 408
DBB60 3,500,000 105 1025 1.03 4082 8,999 396 156 165 65
DBB55 2,500,000 75 732 .732 3500 7,716 396 156 152 60
DBB50 1,800,000 54 527 .527 2800 6,173 335 132 140 55
DBB42 1,000,000 30 293 .293 2200 4,850 335 132 119 47
DBB36 750,000 23 219 .219 1600 3,527 335 132 104 41
DBB30 500,000 15 146 .146 1200 2 ,46 305 120 89 35
TITAN 1 230,000 7 67 0.07 1300 2,866 213 84 91 36
TITAN 2 440,000 13 129 0.13 1600 3,527 249 98 122 48
Water Outlet (cm)
Water Outlet (in)
Approx. Heat Area (30 sq.
ft.)
Approx. Heat Area (sq. metres)
Approx. Greenhouse
Heat Area (120 sq ft.)
Approx. Greenhouse
Heat Area (sq. metres)
Water Capacity (L)
Water Capacit (US Gal)
20 8 400,000 38,000 100,000 9,290 9657 2,551
10 4 116,667 11,000 29,167 2,709 1741 460
10 4 83,333 7,700 20,833 1,935 1571 415
10 4 60,000 5,600 15,000 1,393 1268 335
8 3 333,33 3,100 8,333 774 844 223
5 2 25,000 2,300 6,250 580 662 175
5 2 16,667 1,500 4,167 387 481 127
6 2 x 1 1/2 7,667 712 1,916 178 265 70
6 2 x 1 1/2 14,667 1,400 3,667 340 704 186
Approximate heat area on insulated structures is based on 30 BTU per sq.ft. Approximate heat area on a Greenhouse structure is based on 120 BTU per sq. ft.
TITAN SERIES
The new Titan series multi-fuel heating unit has been designed for durability, simplicity, efficiency and reliability. This unit can burn coal, wood pellets, blends of coal and grain or any other pelletized fuel. Ideal for the ag-industry heating shops, homes and drying grain. These units are CSA tested and certified.
Auto Ash Remover (optional)
SPECIFICATIONS
8" / 20 cm
120 volt 15 amp Single Phase½ hp 120 volt136" / 345 cm16" / 41 cm
2 X 1 ½" / 5 x 4 cm2 X 1 ½" / 5 x 4 cm
22’’ x 24’’ / 56 x 61 cm
900 CFM28 flues c/w spirals
70 US gal / 265 litres 1300 KG (approx.) / 2,866 lbs
63’’ / 160 cm46" / 117 cm 84" / 213 cm
230,000
Venting Size
Power RequirementsDrive MotorStoker LengthStoker head c/w rotating ash ringWater OutletsWater InletsDoor Size
FanFluesWater CapacityWeightWidthDepth
Height BTU (Approx.)
8" / 20 cm
120 volt 15 amp Single Phase½ hp 120 volt136" / 345 cm
20" / 51 cm2 X 1 ½" / 5 x 4 cm
2 X 1 ½" / 5 x 4 cm
900 CFM57 flues c/w spirals
186 US gal / 704 litres 1600 kg (approx) / 3527 lbs
64" / 162.56 cm60" / 152.4 cm
98" / 248.92 cm 440,000
22’’ x 24’’ / 56 x 61 cmVenting Size
Power RequirementsDrive MotorStoker LengthStoker head c/w rotating ash ringWater OutletsWater InletsDoor Size
FanFluesWater CapacityWeightWidthDepth
Height BTU
T I T A N
SERIES
2
T I T A NSERIES
1
Triple pass with spiral diffusers • steam • hot water • natural gas • propane • heating oil
Model DBBG 1000 diaphram (inches) 48
BTU rating 1,000,000 diaphram (cm) 121.92
HP 29.8 water inlet/outlet (cm) 10.16
KW hour 293 water inlet/outlet (inches) 4
Shipping weight (kg) 997.9 water capacity (L) 1741
Shipping weight (lbs) 2200 water capacity (G) 268
height (inches) 72 length (inches) 100
height (cm) 182.88 length (cm) 254
Retrofit your existing solid fuel boiler to natural gas or propane.Riello burner, mounted into our Boilers
Decker Brand Horizontal Gas BoilerNatural Gas & Propane Gas
Economizer Increase efficiency an additional 10% with Decker Brand Economizer by capturing heat and bringing the gases to a temperature acceptable for the baghouse filter. Dramatically improving boiler efficiency with Multi-clone dust collectors, which traps dangerous particulates.
Our patented flue cleaning system helps us achieve our mission of producing one of the cleanest boilers burning in the industry. Our system incorporates spiral flue gas diffusers that facilitate maximum heat absorption and reduce stack temperature.
• Minimal Labor• Removes up to 90% of particulates, 10 microns and larger in size• Long-lasting cast iron collecting tube• Reliable and high separations efficiency• Custom-designed for each application• Virtually no maintenance• Simple Construction
M u l t i c l o n eDustCollectors
The Multiclone Dust Collector unique features and benefits:
EMISSION TESTboiler with the waste heat boiler & baghouse
Particulate Results Pine Wood PelletsParameter Test 1
10:3011:3579.95.8
12.7019750.68
2.23 | 0.01
Test 211:4512:5282.05.6
13.0520290.70
1.16 | 0.00
Test 31:052:1078.35.2
13.2320570.72
2.61 | 0.01
AverageN/AN/A80.15.5
12.9920210.70
2.00 | 0.01
Start TimeStop TimeGas Temperature (oC) % MoistureVelocity (m/sec)ACFMStd. Dry Flow Rate (m3/sec)Tot Part. Dry Basis ref. Cond. (mg/m3) | Mass Emission Rate (kg/hr)
Organic Results Pine Wood Pellets
Carbon Monoxide Results Pine Wood Pellets
Parameter
Parameter
Start TimeStop TimeWet (PPM) % MoistureDry (PPM) Converted to (mg/m3) m3/secMass Emission Rate (kg/hr)
Start TimeStop TimePPMConverted to (mg/m3) m3/secMass Emission Rate (kg/hr)
10:3014:007.315.557.7414.190.700.036
10:3014:00137.9160.530.700.40
With over 25 years of experience, the DECKER BRAND BOILER gives you peace of mind knowing the product and workmanship is guaranteed to be high quality. Our quality control program certified by ASME (American Standards of Mechanical Engineering), CRN (Canadian Registration Number), and CSA (Canadian Standards Association). Additional boiler safety organizations include; The National Board of Boiler and Pressure Vessel Inspectors, Manitoba Department of Labour, TSSA (Technical Standards & Safety Authority) and is TUV test ordered.
DECKER BRAND BOILERS conform to and are certified by boiler safety and pressure vessel organizations. This means all materials used are certified traceable and welding is done by certified pressure welders. Even the welding electrode material of each weld is certified and traceable.
Sophisticated efficiency testing is conducted by certified professionals on the DECKER BRAND BOILER for various types of solid fuel including wood pellets and coal.
We offer a limited warranty on the pressure vessel and conditional warranty on all other components.
QUALITY CONTROL& CERTIFICATION
Substantival Savings on Heating costsworld wide service
over 30 years of experience
Toll Free: (844) 854-4328 Phone: (204) 412-0234General: (204) 764-2861
Fax: (204) 764-2594
WWW.deckerbrand.comemail: [email protected]