msa ultrasonic gas detector
DESCRIPTION
Ideal for oil exploration and extraction the MSA Ultrasonic Gas Detector offers a wide range of detection information. Find out more in this datasheet prepared by gas detection specialists a1-cbiss.TRANSCRIPT
UltraSonic EX-5Ultrasonic Gas Leak Detector Instantly detect pressurised gas leaks in a 20 meter radius with this high-precision, omnidirectional, ultrasonic leak detector
Responds to the Sound Not the Leak The UltraSonic EX-5 is a non-concentration based gas detector used to
detect leaks from high pressure systems. The UltraSonic EX-5 responds to
the airborne ultrasound generated from gas releases in open, well
ventilated areas, where traditional methods of detection may be
unsuitable or dependent on ventilation.
Immunity to Background Noises Immune to audible background noises, such as compressors or heavy
machinery, the EX-5 can be configured to filter short timescale noises that
would otherwise trigger nuisance alarms. At the same time, setting the
alarm trigger level above the ultrasonic background noises ensures
immunity to other noises sources.
Self-Test System for Full Failsafe OperationSENSSONIC™ self-test technology provides a full test of the UltraSonic
EX-5 ultrasonic gas leak detector every 15 minutes. This ensures that the
microphone and the electronics are working to their best of ability.
KEYBENEFITS• Unaffected by changing weather
conditions; rain, fog or solar radiation
• Self-test functionality every 15
minutes ensures failsafe operation
• Microphone technology detects leaks
through the sound ensuring rapid
response at the speed of sound
• Durable design withstands corrosive
environments that contain poisonous
or highly concentrated gases
• Stand alone operation or combine with
traditional detection methods
Long and failsafe ultrasonic detection in extreme
environmental conditions“ “
FREQUENCYRANGE
25 kHz 70 kHzto
TECHNICALSPECIFICATION
GENERAL • Ultrasonic (acoustic) gas leak detector
• 20m radius
• Up to 104 dB range
FREQUENCY & RANGES • Detector Frequency Range: 25 kHz – 70 kHz
• Dynamic Range: 58 – 104 dB
• Test Sound Frequency: 40 ± 3 kHz
• Test Sound Pressure 100 ± 7 dB, 60 mm (from sound source)
TEMPERATURE RANGES• Operating Temperature Range: –40 °C to +60 °C
• Operating Humidity Range: 0–95% RH non condensing
• Ingress Protection: IP66
DETECTOR COVERAGE • Very low noise areas (<58 dB)
13-20 m radius at leak rate = 0.1 kg/s
• Low noise areas (< 68 dB)
9-12 m radius at leak rate = 0.1 kg/s
• High noise areas (< 78 dB)
5-8 m radius at leak rate = 0.1 kg/s
ELECTRICAL SPECIFICATION • Input Power: 15–36 VDC
• Max. Current Consumption: 250 mA
• Relays: 8 A @ 250 VAC / 8 A @ 30 VDC
• RS-485 Output: Modbus RTU, suitable for linking up to
247 units with repeaters
PHYSICAL• Dimensions: 203 x 203 x 201 mm
• Weight: 7.5 kg
• Mounting: Stainless steel mounting bracket
• Housing: Stainless steel AISI 316L
APPROVALS • ATEX, IEC Ex
• CSA, FM
• SIL 2 and 3
• IP66 Rating
ORDERINGINFO
11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HTT: +44(0)151 666 8300 F: +44(0)151 666 8329 E: [email protected] W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com
Cert No. 996ISO 9001
Part Part Number
UltraSonic EX-5 Gas Leak Detector
4 –20 mA, Dual Modbus, Alarm De-Energized, 3/4” NPT
UEX5-1111
4 –20 mA, HART, Modbus, Alarm De-Energized, 3/4” NPT
UEX5-5111
4 –20 mA, Dual Modbus, Alarm De-Energized, M20
UEX5-1131
4 –20 mA, HART, Modbus, Alarm De-Energized, M20
UEX5-5131
Accessories Portable test and calibration unit
80510-1
Windscreen microphone
80333-1
Sunshade 80612-1
Mounting bracket and hardware
80601-1
Magnet stick 80499-1