mountz torque analyzer and test measurement catalog mc...
TRANSCRIPT
Certification Explanation
CERTIFICATIONAll Mountz analyzers andtransducers are supplied witha NIST-TraceableCertification of Calibration.
CALIBRATION SERVICESMountz offers calibration services for all of our own equipment, as well as models from most othermanufacturers. The certificate supplied with each calibration has been revised to include new contentand an easy-to-read modular format. All calibrations are performed using NIST-Traceable standards,and meet the requirements of ANSI/NCSL Z540.
QUALITY STANDARDSTo meet customer requirements, we begin with compliance to stringent, world-class quality standards.- Mountz is an ISO 9001 and ISO 17025 registered company.- Design and testing of all hand tools conforms to requirements of ISO 6789, as specified.- Laboratory operations and calibrations meet the requirements of ANSI/NCSL Z540-1.
SUPPLIERIdentifies name and location of laboratory issuing certificate as well as certificate number.
EQUIPMENT TESTEDEasy identification of tool type, maximum capacity, serial number, and accuracy. Also indicates arrivalcondition of tool, service performed, calibration date, interval, and due date.
STANDARDS USEDIdentifies procedure and equipment used to perform the calibration, as well as test accuracy ratio.
MEASUREMENT DATAGives the nominal point(s) at which the tool was tested, tolerances, actual measurement beforeadjustment and after, environmental conditions during test, and other associated data.
CERTIFICATIONSection for approval of certificate content by authorized signatories. Also includes statement ofcompliance with relevant calibration standards and NIST-Traceability.
This symbol identifies the products that aresupplied with NIST-Traceable Certificationof Calibration.
CERTIFICATE OF CALIBRATION
CERTIFICATIONEXPLANATION
01.1
EXTERNAL TRANSDUCERSIn the case of external transducer and display systems, it is preferable and sometimes required thatall parts of a system be calibrated together. When purchasing external transducers, the Certificateof Calibration can only be supplied where transducers are purchased and calibrated together witha display monitor as a complete measuring system. Otherwise, only a certificate indicating transducerperformance to specification is supplied, and calibration of the transducer to a display unit is stillrequired for proper operation.
External transducers submitted to the Laboratory for after-sale calibration service without a displayunit, will be calibrated using an equivalent calibrated display held in the laboratory whenever possible.Otherwise, the customer will be contacted to deliver their display unit when required to completethe calibration process.
CALIBRATION INTERVALSIn order to maintain accuracy, it is crucial that torque control and measuring equipment be calibratedregularly. We recommend general six (6) month calibration intervals. However, it is the user sorganization that must determine suitable interval frequencies commensurate with their needs basedupon many factors such as history of equipment performance, application, degree of usage, andmanagement objectives.
CUSTOMER COMMITMENTMountz takes the subject of quality seriously — from intricate manufacturing processes to comprehensivelaboratory testing of equipment — we strive to meet your requirements every step of the way.Mountz torque equipment is used to assess, control, and improve the quality of our customer sproducts. The value added by providing premier quality tools is enhanced product reliability andincreased customer satisfaction for our business and yours.
800.456.1828 Mountz MC14 catalog Copyright 2010 all rights reserved
Supplied with NIST-TraceableCertification of Calibration
CERTIFIED
EZ-TorQ IITorque Analyzer
TorqueAnalyzers
SPRING RUN DOWNADAPTERS
Provides consistent andreliable torque readings foruse with power driven torquecontrol tools.
See Page 01.20
EZ-TorQ
01.2
Recommended for hand screwdrivers, most wrenches andpower tools (Not for use in testing Impact or Pulse type tools).
KEY FEATURES
EZ-TorQ II 10i
EZ-TorQ II 50i
EZ-TorQ II 100i
EZ-TorQ II 150i
Torque Ranges
11.3 - 113
56.5 - 565
113 - 1130
169.5 - 1695
cN.m
1 - 10
5 - 50
10 - 100
15 - 150
lbf.inModel
1.2 - 11.5
5.8 - 57.6
11.5 - 115
17.3 - 173
Item #
070800
070801
070802
070803
17mm Female/Hex*
17mm Female/Hex*
17mm Female/Hex*
17mm Female/Hex*
Drive Size
4.5 lbs.
4.5 lbs.
4.5 lbs.
4.5 lbs.
Weightkgf.cm
* Each model includes a 1/4" Female/Hex Sq. Drive Adapter and a Spring Run Down Adapter for testing power tools.
600728-1*
600728-2*
600728-3*
600728-4*
600734-18*
600734-20*
Item #
SCREW RUN DOWN ADAPTERS
RDA
RDA
RDA
RDA
RDA
RDA
Model
2 - 56
4 - 40
6 - 32
8 - 32
5/16 - 18
1/4 - 20
American
M2x.4
M3x.5
M4x.7
M5x.8
-
-
Metric
5
5
5
5
5
5
Quantity
* Hardware Kit # 1 for these RDA units (includes Washer and Screws), Item # 061237.
See EZ-TorQ manual for a list of items that areincluded in the Hardware Kit.
Item #
ACCESSORIES
770300
600729
603107
14-501830
773064
773069
Universal Charger*
Case (Pictured Above)
Battery Pack*
Brush Cap
RS-232 Cable
Serial to USB Adapter
Description
CALIBRATION TESTEQUIPMENT
Calibrated Dead Weight andlength are the official meansby which Analyzers aretraced to NIST, ISO etc.
See Page 01.18
NOTE!Since a tester cannot always duplicate actual jointcharacteristics, the torque reading displayed onthe EZ-TorQ may vary from the actual torque thata tool will apply to a joint. A run down adapterthat simulates a variety of different jointcharacteristics is provided with the EZ-TorQ.When critical assemblies are involved, the torqueoutput of the power tool being used should beverified on the actual assembly using a calibratedmeasuring torque tool.
ACCESSORIES
Accuracy 0.5% of reading from 20% to 100%Accuracy 1% of reading from 10% to 20%
1/4 F/Hex Sq. Dr Adapter(17mm F/Hex)
Dimensions: (L x W x H): 7 1/4" x 4 1/3" x 2"
Selection of two operating modes: Track and Peak.
Seven units of torque measurements:ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm
Features built-in Quick Test operation.
Includes PC Windows based software program:Mountz EZ-TorQ II Interface Program - to conductQuick Tool Tests, Data Logging and Sensor Calibration.
Easy to use Menu Structure.
Six-digit display.
Ability to download readings to PC via RS-232 or via USB.
Real time output via RS-232.
High Capacity Li-Ion Batteries for long life.
The unit will store a total of up to 150 data points.
Real time graph of torque vs. time using associated PCWindows software.
Features Go / No Go LEDs that illuminate when high or lowtolerance setting is achieved or out of tolerance.
Two low-pass filter settings: 500 and 200 Hz.
Includes a Spring Run Down Adapter.
Includes a case, Universal Charger, 1/4 F/Hex Sq. Dr. Adapter,USB Adapter & RS232 Cable Adapter.
Flash memory allows upgrades to be done by the user inthe field & internet through the RS-232 port.
ISO 9001and ISO 17025 Company
* For EZ-TorQ II
600727
120143 Square Dr. Adapter(1/4 Sq. Dr x 1/4 Hex x 2" OAL)
LTT SeriesTorque, Angle & Force Analyzer with ARCII Technology
TorqueLab
LTT
01.3
Torque
Analyzers
Recommended for all hand screwdrivers, wrenches, or power tools.
KEY FEATURES
Features a built-in transducer and can connect to an external transducer.
LTT10i
LTT25i
LTT50i
LTT100i
LTT250i
LTT50F
LTT100F
LTT250F
Torque RangesItem #
11.3 - 113 cN.m
28.25 - 282.5 cN.m
56.5 - 565 cN.m
113 - 1130 cN.m
282.5 - 2825 cN.m
6.8 - 67.8 N.m
13.56 - 135.6 N.m
33.9 - 339 N.m
S.I.
1 - 10 lbf.in
2.5 - 25 lbf.in
5 - 50 lbf.in
10 - 100 lbf.in
25 - 250 lbf.in
5 - 50 lbf.ft
10 - 100 lbf.ft
25 - 250 lbf.ft
AmericanModel
068400
068401
068402
068403
068404
068405
068406
068407
1.2 - 11.5 kgf.cm
2.9 - 28.8 kgf.cm
5.8 - 57.6 kgf.cm
11.5 - 115 kgf.cm
28.8 - 288 kgf.cm
0.7 - 6.9 kgf.m
1.4 - 13.8 kgf.m
3.5 - 34.5 kgf.m
1/4" F/Sq
1/4" F/Sq
1/4" F/Sq
1/4" F/Sq
1/4" F/Sq
3/8" F/Sq
1/2" F/Sq
1/2" F/Sq
Drive Size
8 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
Wt.Metric
NOTE!Since a tester cannot always duplicate actual jointcharacteristic, the torque reading displayed on the LTT mayvary from the actual torque that a tool will apply to a joint.When critical assemblies are involved, the torque output of thepower tool being used should be verified on the actualassembly using a calibrated measuring torque tool.
ACCESSORIES INCLUDEDUniversal Charger (100 - 240VAC)USB CableMountz Software ProgramsRun Down AdapterCase
Selection of six operation modes:Track, Peak, First Peak, Audit, Spindle Audit, and Torque + Angle
Seven units of torque measurements:ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm
Two units of force measurement: lbf and kN
Features built-in Tool Tests operation.
Includes three PC Windows based software programs: Mountz Torque Meter Interface Program for sensor calibrations, meter calibration and tool tests. Torque Meter Bootloader for updating the LTT operating systems. Excel Add-In for Real-Time data collection into an Excel spreadsheet. It provides statistics calculations.
Five low-pass filters: 3000, 2000, 1500, 500, and 200Hz
Six-digit display and easy to read menu structure.
Real Time Clock for time stamping of readings.
USB interface to download readings to PC.
High Capacity Li-ion Batteries for long life (30 hours with standardtransducers and 16 hours with brushless rotary).
Can connect to most mv/v transducers and can store calibration data forup to 50 non-smart torque sensors.
The 5VDC capability allows unit to be used with a Brushless RotaryTransducer for testing pulse tools and high RPM tools.
Features Go / No Go LEDs that illuminate when high or low setting isachieved.
Real time graph of torque vs. time using associated PC Windows software.
Stores a total of 5000 data points.
Torque and Angle data is displayed simultaneously when used with Torqueand Angle transducers, up to 8000 RPM for angle measurement.
Transducer
RTSX-A
All BLRTSX models
BMX
LPX
SDX
RTSX
ETX
CABLE CHART
072000
072001
072002
072003
072004
072005
072006
CableItem #
Accuracy 0.5% of reading from 20% to 100% of full scale.Accuracy 1% of reading from 10% to 20% of full scale.
Provides EZ-Plug & Play with Mountz Transducers, Features ARCIItechnology, an instant auto-recognition system of the transducer connectedto the LTT.
Flash memory allows upgrades to be done by the user in the field &internet through the USB port.
Item #
770300
770319
072506
072998
072997
ACCESSORIESOPTIONAL
Charger 100 - 240VAC
USB Cable
Battery Pack
Multiplexer
Bar Code Reader
Description
Mounting Bracket(for LTT model 10i-50F)
072608
Mounting Bracket(for all other LTT models)
072606
PLC Interface 072014
PLUG & PLAY
Supplied with NIST-Traceable Certification of Calibration
CERTIFIED
PTT SeriesTorque, Angle & Force Analyzer with ARCII Technology
TorqueMate
01.4
NOTE!Since a tester cannot always duplicate actual joint characteristics,the torque reading displayed on the PTT may vary from theactual torque that a tool will apply to a joint. When criticalassemblies are involved, the torque output of the power toolbeing used should be verified on the actual assembly using acalibrated measuring torque tool.
Operates with Torque & Force sensors.
Recommended for all hand screwdrivers, wrenches or power tools.
Seven units of torque measurements:ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm
Two units of force measurement: lbf and kN
Features built-in Tool Tests operation.
Includes three PC Windows based software programs: Mountz Torque Meter Interface Program for sensor calibrations, meter calibration and tool tests. Torque Meter Bootloader for updating the PTT operating systems. Excell Add-In for Real-Time data collection into an Excel spreadsheet. It provides statistic calculations.
Five low-pass filters: 3000, 2000, 1500, 500, and 200Hz
Six-digit display and easy to read menu structure.
Real Time Clock for time stamping of readings.
USB interface to download readings to PC.
High Capacity Li-ion Batteries for long life (30 hours with standardtransducers and 16 hours with brushless rotary).
Can connect to most mv/v transducers and can store calibration datafor up to 50 non-smart torque sensors.
The 5VDC capability allows unit to be used with a Brushless RotaryTransducer for testing pulse tools and high RPM tools.
Features Go / No Go LEDs that illuminate when high or low setting isachieved.
Real time graph of torque vs. time using associated PC Windows software.
Stores a total of 5000 data points.
Torque and Angle data is displayed simultaneiously when used withTorque and Angle transducers, up to 8000 RPM for angle measurement.
RTSX-A
All BLRTSX Models
BMX
LPX
SDX
RTSX
ETX
CABLE CHARTTransducer
072000
072001
072002
072003
072004
072005
072006
Item #
Charger 100 - 240VAC
USB Cable
Battery Pack
Multiplexer
Bar Code Reader
PLC Interface
ACCESSORIESOPTIONALDescription
770300
770319
072506
072998
072997
072014
Item #
PTT-2000 Item #072999
Universal Charger (100 - 240VAC)USB CableMountz Software ProgamsProtective Cover
Tool Tests & GraphingThe PTT allows you to set up and createtool tests and save the readings so youcan export the data to a PC fordocumentation. It is the ideal solution fororganizing and storing test data for ISOand SPC documentation.
The ability to graph a dynamic rundownallows joint analysis. Great resource toevaluate, create or confirm a torquespecification or tool being used inproduction.
PTT
KEY FEATURES
System Accuracy 0.5% of reading from 20% to 100% of full scale.System Accuracy 1% of reading from 10% to 20% of full scale.
Provides EZ-Plug & Play with Mountz Transducers, Features ARCIItechnology, an instant auto-recognition system of the transducer connectedto the PTT.
Flash memory allows upgrades to be done by the user in the field &internet through the USB port.
Torque
Analyzers
Selection of six/seven operation modes:Track, Peak, First Peak, Audit, Bolt Audit*, Spindle Audit, Torque + Angle.
*The Bolt Audit Mode is an additional feature that is only available with PTT Bold Audit Model (Item #072995).
ACCESSORIES INCLUDED
PTT-2000 Bolt Audit Model(for HSD Multipliers) - Item #072995
Supplied with NIST-Traceable Certification of Calibration
CERTIFIED
PLUG & PLAY
Wizard Plus
WIZARD PLUS
01.5 800.456.1828
PDA Torque & Force Analyzer
The Wizard Plus is a CF2 Card that plugs into a Pocket PC or
Laptop/PC. The Wizard Plus comes with a CF2 to PCMCIA
Adapter. A Pocket PC and/or Laptop are not included and must
be purchased separately.
It can be used for torque calibration, joint testing, auditing or for
force and load measurement or verification of load cells.
The graphing feature can be
utilized to evaluate and
confirm torque specifications
in both production or R & D
environments.
The readings are displayed
along with tool identification
and preset information when
a load is applied.
Perform and save test data
for tools. The files are saved
as an Excel document.
The Wizard Plus is the ideal
solution for organizing and
storing test data for ISO &
SPC documentation.
The user-friendly interface
makes it quick and simple
to setup your torque testing
parameters for hand or
power tools.
(Wizard Plus CF2 Card &CF2 to PCMCIA Adapter)Item #065080
WIZARD PLUS
BMX
RTSX
SDX
LPX
ETX
Transducer Item #065180
065181
065182
065183
065188
CABLE CHART
SMX - Contact
Customer Service.
Laptop/PC with PCMCIA Slot
- Intel Pentium III Processor
- CD-ROM Drive
- Windows 98, NT4
- Windows 2000, XP Pro
- Microsoft Activesync 3.x or above
- Microsoft Excel 97 or above
MINIMUM REQUIREMENTS
P.D.A. (Personal Digital Assistant)
- with a CF2 Slot
- running Microsoft Pocket PC
Ideal laboratory system when used with PC or Laptop.
Takes calibration to the production line when used with aPDA/Laptop.
Enables calibration and analysis of hand and power torquetools.
KEY FEATURES
Two test mode options: SPC Testing & ISO 6789 Testing.
Instant on-screen SPC (Statistical Process Control) resultsfrom the readings collected.
Ability to test and produce tool Calibration Certificates toISO 6789
Seamless transfer of data, graphs, and SPC results toMicrosoft Excel.
Easy-to-use menu system.
All major units of Torque and Force supported.
Four mode options - Track, Peak, 1st Peak, and Power Tool.
Almost infinite memory capacity (dependent on memory ofhost PDA/PC).
Compatible with most industry standard Torque and ForceTransducers.
Instant graph of Torque vs Time.
TorqueAnalyzers
Supplied with NIST-TraceableCertification of Calibration
CERTIFIED
System accuracy 0.5% of reading from 10% to 100%.
Easy to use Windows and Pocket PCsoftware for Torque and Force measurement.
Mountz MC14 catalog Copyright 2010 all rights reserved
DIAL ANALYZER
01.6
Dial AnalyzersHand Tool Torque Analyzers
Torque
Analyzers
Accuracy 2% of reading from 20% to 100% of full scale.
KEY FEATURES
Easy to read dual scale (Metric & American)
Bench mount style.
Memory style master pointer retains maximum readings.
Designed for all types of hand torque wrenches and screwdrivers.
Clockwise direction only (MTS models).
Reversible drive adapters provide two drive options per model(MTS models).
0 - 10 cN.m
7 - 35 cN.m
26 - 130 cN.m
0.8 - 4 N.m
2.4 - 12 N.m
5 - 25 N.m
0 - 14 ozf.in
10 - 50 ozf.in
36 - 180 ozf.in
7 - 36 lbf.in
24 - 120 lbf.in
44 - 220 lbf.in
MTP 10
MTS 35
MTS 130
MTS 400
MTS 1200
MTS 2500
020000
020001
020002
020003
020004
020005
Item # S.I.AmericanModelTorque Ranges
0.5 cN.m
0.5 cN.m
2 cN.m
0.05 N.m
0.2 N.m
0.5 N.m
1 ozf.in
0.5 ozf.in
2 ozf.in
0.5 lbf.in
2 lbf.in
5 lbf.in
MTP 10
MTS 35
MTS 130
MTS 400
MTS 1200
MTS 2500
Model S.I.AmericanGraduation
Single
Memory
Memory
Memory
Memory
Memory
Pointer kg.lbs.Weight
2.16
7.1
7.1
7.1
7.1
7.1
0.98
3.2
3.2
3.2
3.2
3.2
Supplied with NIST-TraceableCertification of Calibration
CERTIFIED
NOTE!Do not use with electric or pneumatic tools.
For models: MTS 35, 130, 400
REVERSIBLE ADAPTER1/4 M/HEX & 1/4 F/SQ.
For models: MTS 1200, 2500
REVERSIBLE ADAPTER1/4 F/SQ. & 3/8 F/SQ.
New robust and modern design includes angled dial for easyviewing (MTS models).
Spindle lock eliminate the need to remove tool from drive duringtorque adjustment (MTS models).
Input drive shock absorder protects from tool kick back (MTSmodels).
Bi-directional & fitted with 1/4" Male hex drive (MTP model).
Dial mirror eliminates parallex error. Uses pendulum effect tomeasure the applied torque (MTP model).
Accessories
LPX
01.7
LPXLow Profile Torque Reaction Transducer with ARC II Technology
KEY FEATURES
0.7 - 7.1 cN.m
1.5 - 14 cN.m
2.9 - 28.2 cN.m
5.7 - 56.5 cN.m
11.3 - 113 cN.m
22.6 - 226 cN.m
1 - 10 ozf.in
2 - 20 ozf.in
4 - 40 ozf.in
8 - 80 ozf.in
16 - 160 ozf.in
2 - 20 lbf.in
LPX10z
LPX20z
LPX40z
LPX80z
LPX160z
LPX20i
079000
079001
079002
079003
079004
079005
Item # S.I.AmericanModelTorque Ranges
Transducers
1/4 Female Square
1/4 Female Square
1/4 Female Square
1/4 Female Square
1/4 Female Square
1/4 Female Square
LPX10z
LPX20z
LPX40z
LPX80z
LPX160z
LPX20i
DRIVE SIZE & DIMENSIONSinches
1.6
1.6
1.6
1.6
1.6
1.6
A
1
1
1
1
1
1
CB
2.55
2.55
2.55
2.55
2.55
2.55
For calibrating low torque hand screwdrivers,wrenches, and power tools.
1/4" female square drive.
Bi-directional.
Various models that range from 1 ozf.in to 20 lbf.in.
Mountable.
The low profile design makes it ideal forcalibrating robotic drivers on the assembly line.
SPECIFICATIONS
Drive Size
TLS MINIMASTERTorque Limiting ScrewdriverInternally Adjustable
RUN DOWN ADAPTERSProvides consistent and reliabletorque readings for use withpower driven torque control tools.
See Page 01.20
Model
Always use a run down adapterwhen testing power tools.
WARNING!
LPX CABLE
For connecting toPTT or LTT
Item #072003
For connecting toWizard Plus
Item #065183
5
32
1
4 6
CONNECTION1 = Signal (+)
2 = Signal (-)
3 = Excitation (-)
4 = Excitation (+)
5 = Ground
6 = Data
MOUNTINGBRACKET
Model: MB-1Dimensions:4" x 3" x 4"
Item #062109
CA.985"
M4 x 7mm DP MTG 4x
1.9"
B
Supplied with NIST-TraceableCertification of Calibration
CERTIFIED
Rated Output: 2mv/v Nominal
Safe Overload: 125% of Rated Output
Bridge Resistance: 350 Ohms Nominal
Nonlinearity: 0.1% of Rated Output
Accuracy 0.25% of full scale.
Features ARCII technology, an instant auto-recognitionsystem of the LPX connected to the PTT or LTT.
800.456.1828
(For hand torque screwdrivers, askfor our Assembly Tools catalog).
Mountz MC14 catalog Copyright 2010 all rights reserved
PLUG & PLAY
Transducers
077000
077001
077002
077003
077004
077005
077006
077007
077008
077009
077010
077011
077012
077013
077014
077015
077016
077017
077018
BMX
01.8
BMXTorque Reaction Transducer with ARCII Technology
BMX20z
BMX40z
BMX80z
BMX10i
BMX25i
BMX50i
BMX100i
BMX250i
BMX500i
BMX750i
BMX50F
BMX100F
BMX250F
BMX500F
BMX1000F
BMX2500F
BMX5000F
BMX10000F
BMX20000F
1.5 - 14 cN.m
2.9 - 28.2 cN.m
5.7 - 56.5 cN.m
11.3 - 113 cN.m
28 - 282.5 cN.m
56.5 - 565 cN.m
113 - 1130 cN.m
282.5 - 2825 cN.m
565 - 5650 cN.m
847 - 8473 cN.m
6.8 - 67.8 N.m
13.6 - 135.6 N.m
33.9 - 339 N.m
67.8 - 678 N.m
135.6 - 1355 N.m
339 - 3389 N.m
678 - 6779 N.m
1335 - 13558 N.m
2711 - 27116 N.m
Torque RangesItem # S.I.
2 - 20 ozf.in
4 - 40 ozf.in
8 - 80 ozf.in
1 - 10 lbf.in
2.5 - 25 lbf.in
5 - 50 lbf.in
10 - 100 lbf.in
25 - 250 lbf.in
50 - 500 lbf.in
75 - 750 lbf.in
5 - 50 lbf.ft
10 - 100 lbf.ft
25 - 250 lbf.ft
50 - 500 lbf.ft
100 - 1000 lbf.ft
250 - 2500 lbf.ft
500 - 5000 lbf.ft
1000 - 10000 lbf.ft
2000 - 20000 lbf.ft
AmericanModel
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
4
4
4
4
6
6
10.5
10.5
A
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
3/4
1
1 1/2
1 1/2
2 1/2
2 1/2
DriveSize
BMX20z
BMX40z
BMX80z
BMX10i
BMX25i
BMX50i
BMX100i
BMX250i
BMX500i
BMX750i
BMX50F
BMX100F
BMX250F
BMX500F
BMX1000F
BMX2500F
BMX5000F
BMX10000F
BMX20000F
B
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.75
2.75
3
3.75
4.65
4.65
10.5
10.5
C
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.75
1.75
2.25
2.25
2.4
2.38
3.88
3.88
6.5
6.5
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.413
0.413
0.413
0.406
0.531
0.531
0.781*
0.781*
D
2.175
2.175
2.175
2.175
2.175
2.175
2.175
2.175
2.175
2.175
2.175
3
3
3
3
4.75
4.75
8.875
8.875
E
DIMENSIONSinches
Model
Rated Output: 2mv/v Nominal
Safe Overload: 125% of Rated Output
SPECIFICATIONSBridge Resistance: 350 Ohms Nominal
Nonlinearity: 0.1% of Rated Output
For calibrating hand screwdrivers, wrenches,and power tools.
Female square drive.
Bi-directional.
KEY FEATURES
Various models that range from 2 ozf.in to 20000 lbf.ft.
Mountable.
BMX CABLES
For connectingto LTT or PTT
Item #072002
A
CD
E
B F
A = Excitation (+)
B = Excitation (-)
C = Signal (-)
D = Signal (+)
E = N/A
F = N/A
CONNECTION
For connecting toWizard Plus
Item #065180
Connect With A:
PTTA portable, accurate andversatile Torque & AngleAnalyzer that fits comfortablyin the hand.
See Page 01.4
LTT
See Page 01.3
MOUNTING BRACKETSee Page 01.19
Always use a run down adapterwhen testing power tools.
Not recommended for impact wrenches.
WARNING!
Supplied with NIST-TraceableCertification of Calibration
CERTIFIED
Accuracy 0.25% of full scaleAccuracy 0.5% of full scale (BMX10000F, 20000F)
Features ARCII technology, an instant auto-recognitionsystem of the BMX connected to the LTT & PTT.
Offers EZ-Plug & Play withinstant auto recognition withMountz ARCII transducers.
*Models have 8 mounting holes. PLUG & PLAY
Drive Size F/SquareC
B
A
D (Mounting Holes)
E (Dia.)
RTSX
01.9
RTSXRotary Torque Transducer with ARCII Technology
Transducers
11.3 - 113 cN.m
11.3 - 113 cN.m
56.5 - 565 cN.m
56.5 - 565 cN.m
113 - 1130 cN.m
113 - 1130 cN.m
226 - 2260 cN.m
226 - 2260 cN.m
6.8 - 67.8 N.m
13.6 - 135.6 N.m
54.2 - 542.4 N.m
100 - 1000 N.m
203.3 - 2033 N.m
1 - 10 lbf.in
1 - 10 lbf.in
5 - 50 lbf.in
5 - 50 lbf.in
10 - 100 lbf.in
10 - 100 lbf.in
20 - 200 lbf.in
20 - 200 lbf.in
5 - 50 lbf.ft
10 - 100 lbf.ft
40 - 400 lbf.ft
74 - 738 lbf.ft
150 - 1500 lbf.ft
RTSX10i-H
RTSX10i
RTSX50i-H
RTSX50i
RTSX100i-H
RTSX100i
RTSX200i-H
RTSX200i
RTSX50F
RTSX100F
RTSX400F
RTSX738F
RTSX1500F
170200
170201
170202
170203
170204
170205
170206
170207
170208
170209
170210
170211
170212
Item # S.I.AmericanModelTorque Ranges
RTSX10i-H
RTSX10i
RTSX50i-H
RTSX50i
RTSX100i-H
RTSX100i
RTSX200i-H
RTSX200i
RTSX50F
RTSX100F
RTSX400F
RTSX738F
RTSX1500F
1/4 Male/Hex
1/4 Female/Square
1/4 Male/Hex
1/4 Female/Square
1/4 Male/Hex
1/4 Female/Square
1/4 Male/Hex
3/8 Female/Square
3/8 Female/Square
1/2 Female/Square
3/4 Female/Square
1 Female/Square
1 1/2 Female/Square
Input
1/4 Female/Hex
1/4 Male/Square
1/4 Female/Hex
1/4 Male/Square
1/4 Female/Hex
1/4 Male/Square
1/4 Female/Hex
3/8 Male/Square
3/8 Male/Square
1/2 Male/Square
3/4 Male/Square
1 Male/Square
1 1/2 Male Square
Output
DRIVE SIZEinches
RTSX10i-H
RTSX10i
RTSX50i-H
RTSX50i
RTSX100i-H
RTSX100i
RTSX200i-H
RTSX200i
RTSX50F
RTSX100F
RTSX400F
RTSX738F
RTSX1500F
DIMENSIONS
101
75
101
75
101
75
101
74.5
74.5
79
97
112
165
A
58
58
58
58
58
58
58
44
44
44
50
57
87
D
28
8.5
28
8.5
28
8.5
28
18
18
22.5
30
34.5
44
EB
28
28
28
28
28
28
28
38
38
38
58
73
110
C
52
52
52
52
52
52
52
58
58
58
76
90
126
mm
SPECIFICATIONS
Model
Model
800.456.1828
Output at Rated Capacity: </= 6 Nm[53 lbf.in] rated torque 1 mV/V > 6 Nm[53 lbf.in] rated torque 2 mV/V
Interchangeability: Matched for mv/v and shunt calibration + 0.3% FS
Nonlinearity: + 0.2% FS
Excitation Recommended: 10V DC or AC RMS
Bridge Resistance: 350 Ohms
Usable Temperature Range: 41 - 122 F
Mating Connector: Bendix PT06A-10-65 (SR)
Safe Overload: 125% of Rated Output
Accuracy 0.25% of full scale.
Use with most hand tools, power tools, or rotationalmeasurement applications.
Connects between the power tool and the joint.Monitors actual torque being applied from the driverto the fastener.
Bi-directional.
KEY FEATURES
Connect With A:
ANALYZERWizard Plus (shown)
See Page 01.5
LTTSee Page 01.3
PTTSee Page 01.4
Connector
Connector
i & FModels
DA
E B
C
i-HModels
DA
EB
C
A
ED
C
F B
R
BLK
GR
W
RTSX CABLES
For connectingto PTT or LTT
Item #072005
Item #065181For connecting toWizard Plus
CONNECTION
A = Excitation (+)
B = Excitation (-)
C = Output (-)
D = Output (+)
E = Shield
F = 100% control (full scale)
Features ARCII technology, an instant auto-recognition system of the RTSX connected to thePTT or LTT.
PLUG & PLAY
Supplied with NIST-Traceable Certificationof Calibration
CERTIFIED
Not recommendedfor impact wrenches.
WARNING!
Rotary Torque & Angle Transducer with ARCII Technology
RTSX-A
RTSX-A
01.10
Transducers
RTSX10i-HA
RTSX10i-A
RTSX50i-HA
RTSX50i-A
RTSX100i-HA
RTSX100i-A
RTSX200i-HA
RTSX200i-A
RTSX50F-A
RTSX100F-A
RTSX400F-A
RTSX800F-A
RTSX1500F-A
11.3 - 113 cN.m
11.3 - 113 cN.m
56.5 - 565 cN.m
56.5 - 565 cN.m
113 - 1130 cN.m
113 - 1130 cN.m
226 - 2260 cN.m
226 - 2260 cN.m
6.8 - 67.8 N.m
13.6 - 135.6 N.m
54.2 - 542.4 N.m
108.4 - 1084 N.m
203.3 - 2033N.m
1 - 10 lbf.in
1 - 10 lbf.in
5 - 50 lbf.in
5 - 50 lbf.in
10 -100 lbf.in
10 - 100 lbf.in
20 - 200 lbf.in
20 - 200 lbf.in
5 - 50 lbf.ft
10 - 100 lbf.ft
40 - 400 lbf.ft
80 - 800 lbf.ft
150 - 1500 lbf.ft
Torque RangesItem # S.I.AmericanModel
170213
170214
170215
170216
170217
170218
170219
170220
170221
170222
170223
170224
170282Ability to measure the rotation angle of a fastener.Joint rate and breakaway torque can be measured too.
Bi-directional.
KEY FEATURES
Angle Output: 2 channel quadrature, 360 pulses per rotation.
For use with most power tools or rotational measurementapplications.
DRIVE SIZEinches
SPECIFICATIONS
1/4 Male/Hex
1/4 Female/Square
1/4 Male/Hex
1/4 Female/Square
1/4 Male/Hex
1/4 Female/Square
1/4 Male/Hex
1/4 Female/Square
3/8 Female/Square
1/2 Female/Square
3/4 Female/Square
1 Female/Square
1 1/2 Female/Square
1/4 Female/Hex
1/4 Male/Square
1/4 Female/Hex
1/4 Male/Square
1/4 Female/Hex
1/4 Male/Square
1/4 Female/Hex
1/4 Male/Square
3/8 Male/Square
1/2 Male/Square
3/4 Male/Square
1 Male/Square
1 1/2 Male/Square
RTSX10i-HA
RTSX10i-A
RTSX50i-HA
RTSX50i-A
RTSX100i-HA
RTSX100i-A
RTSX200i-HA
RTSX200i-A
RTSX50F-A
RTSX100F-A
RTSX400F-A
RTSX800F-A
RTSX1500F-A
Input OutputModel
Connector
i-A, F-AModels
DA
E B
C
Not recommended for impact wrenches.
WARNING!
Supplied with NIST-TraceableCertification of Calibration
CERTIFIED
Connector
i-HAModels
DA
EB
C
DIMENSIONSmm
101
75
101
75
101
75
101
75
101
106
135
177
165
A
28
8.5
28
8.5
28
8.5
28
8.5
21.5
26
40
57.5
39
E
RTSX10i-HA
RTSX10i-A
RTSX50i-HA
RTSX50i-A
RTSX100i-HA
RTSX100i-A
RTSX200i-HA
RTSX200i-A
RTSX50F-A
RTSX100F-A
RTSX400F-A
RTSX800F-A
RTSX1500F-A
B
28
28
28
28
28
28
28
28
38
38
58
73
110
C
52
52
52
52
52
52
52
52
58
58
76
90
126
58
58
58
58
58
58
58
58
59
59
64
73
87
DModel
RTSX-A CABLE
For connecting toPTT or LTT
Item #072000
Torque OutputA = Bridge Voltage (+)
B = Bridge Voltage (-)
C = Measured Signal (+)
D = Measured Signal (-)
E = Ground (Angle Voltage)
F = +5V (Angle Voltage)
Angle OutputG = Channel A (Load)
H = Channel B (Lag)
I = N/A
K = 100% Control (Full Scale)
CONNECTION
E
H
G
A
F
B
C
D
KI
Connect With A:
PTTAbility to document andsave torque readings.Ideal for SPC testing andISO testing.See Page 01.4
Accuracy 0.25% of full scale.
Features ARCII technology, an instant auto-recognitionsystem of the RTSX-A connected to the PTT or LTT.
Output at Rated Capacity: </= 6 Nm[53 lbf.in] rated torque 1 mV/V > 6 Nm[53 lbf.in] rated torque 2 mV/V
Interchangeability: Matched for mv/v and Shunt Calibration + 0.3% FS
Nonlinearity: + 0.2% FS
Excitation Recommended: 12V DC or AC RMS
Bridge Resistance: 350 Ohms
Usable Temperature Range: 41 - 122 F
Mating Connector: Bendix PT06A-12
Safe Overload: 125% of Rated Output
ISO 9001and ISO 17025 Company
PLUG & PLAY
BLRTSX-A
01.11
BLRTSX-ABrushless Rotary Torque & Angle Transducer with ARCII Technology
TRANSDUCERS
Non-contact signal transfer and maintenance free.
The common brush bounce that plagues the accuracytesting of pulse tools is cured when using a brushlessrotary transducer.
Compact design & bi-directional.
KEY FEATURES
For use with most power tools, high RPM tools, orrotational measurement applications.
7 - 20 cN.m
7 - 49 cN.m
18 - 98.8 cN.m
22.5 - 203 cN.m
56.5 - 565 cN.m
113 - 1130 cN.m
113 - 1130 cN.m
180 - 1807 cN.m
180 - 1807 cN.m
5 - 50 N.m
10 - 100 N.m
16 - 160 N.m
25 - 250 N.m
50 - 500 N.m
100 - 1000 N.m
10 - 28 ozf.in
10 - 70 ozf.in
25 - 140 ozf.in
2 - 18 lbf.in
5 - 50 lbf.in
10 - 100 lbf.in
10 - 100 lbf.in
16 - 160 lbf.in
16 - 160 lbf.in
4 - 36 lbf.ft
8 - 73 lbf.ft
12 - 118 lbf.ft
19 - 184 lbf.ft
37 - 368 lbf.ft
74 - 738 lbf.ft
BLRTSX28z-HA
BLRTSX70z-HA
BLRTSX140z-HA
BLRTSX18i-HA
BLRTSX50i-HA
BLRTSX100i-HA
BLRTSX100i-A
BLRTSX160i-HA
BLRTSX160i-A
BLRTSX36F-A
BLRTSX73F-A
BLRTSX118F-A
BLRTSX184F-A
BLRTSX368F-A
BLRTSX738F-A
170283
170246
170247
170248
170249
170250
170251
170252
170253
170254
170255
170256
170257
170258
170259
Item # S.I.AmericanModelTorque Ranges
101
101
101
101
101
101
75
101
75
101
106
106
135
135
177
A
58
58
58
58
58
58
58
58
58
59
59
59
64
64
73
D
28
28
28
28
28
28
8.5
28
8.5
21.5
26
26
40
40
57.5
EB C
52
52
52
52
52
52
52
52
52
58
58
58
76
76
90
1/4 M/Hex
1/4 M/Hex
1/4 M/Hex
1/4 M/Hex
1/4 M/Hex
1/4 M/Hex
1/4 F/Sq
1/4 M/Hex
1/4 F/Sq
3/8 F/Sq
1/2 F/Sq
1/2 F/Sq
3/4 F/Sq
3/4 F/Sq
1 F/Sq
1/4 F/Hex
1/4 F/Hex
1/4 F/Hex
1/4 F/Hex
1/4 F/Hex
1/4 F/Hex
1/4 M/Sq
1/4 F/Hex
1/4 M/Sq
3/8 M/Sq
1/2 M/Sq
1/2 M/Sq
3/4 M/Sq
3/4 M/Sq
1 M/Sq
BLRTSX28z-HA
BLRTSX70z-HA
BLRTSX140z-HA
BLRTSX18i-HA
BLRTSX50i-HA
BLRTSX100i-HA
BLRTSX100i-A
BLRTSX160i-HA
BLRTSX160i-A
BLRTSX36F-A
BLRTSX73F-A
BLRTSX118F-A
BLRTSX184F-A
BLRTSX368F-A
BLRTSX738F-A
Input Output
Connector
i-A & FA Models z-HA, i-HA Models
DA
EDA
E B
C
Model
Angle Output: 2-channel quadrature, 360 pulses perrotation.
Ability to measure the rotation angle of a fastener.Joint rate & breakaway torque can be measured too.
Supplied with NIST-TraceableCertification of Calibration
CERTIFIED
Drive Size (inches) Dimensions (mm)
28
28
28
28
28
28
28
28
28
38
38
38
58
58
73
Accuracy 0.2% of full scale.
Features ARCII technology, an instant auto-recognitionsystem of the BLRTSX-A connected to the PTT or LTT.
Rated Output: 5VDC 0.2% FS
Excitation Recommended: 11VDC to 26VDC (pole secure)
Nonlinearity: 0.2% FS
Usable Temperature Range 41 to 122 F
Mating Connector: Tuchel Series 581 (98-2030-09-12)
Safe Overload: 150% of Rated Output
SPECIFICATIONS
BLRTSX-A CABLEFor connecting to thePTT or LTT.
Item #072001
CONNECTION
A
E
D
C
F
B
GM
H
JL
K
A = Ground (Shunt Calibration)
B = Angle 1 Speed
C = Torque Output
D = Ground (Torque Output)
E = Ground (Supply)
F = Supply, 11-26 VDC, 1 W
G = Angle 2
(90 running after Angle 1)
H = +5V (Angle Voltage)
K = Shunt Calibration
M = Shield
J & L = N/A
800.456.1828
Threads for mounting M4, 6mm depth.
Mountz MC14 catalog Copyright 2010 all rights reserved
PLUG & PLAY
BLRTSXBrushless Rotary Torque Transducer with ARC II Technology
BLRTSX
01.12
Transducers
Non-contact signal transfer and maintenance free.
Bi-directional.
KEY FEATURES
Compact design.
For use with most power tools, high RPM tools, orrotational measurement applications.
BLRTSX28z-H
BLRTSX70z-H
BLRTSX140z-H
BLRTSX18i-H
BLRTSX50i-H
BLRTSX50i
BLRTSX100i-H
BLRTSX100i
BLRTSX160i-H
BLRTSX160i
BLRTSX18F
BLRTSX36F
BLRTSX73F
BLRTSX118F
BLRTSX184F
BLRTSX368F
BLRTSX738F
DIMENSIONS
101
101
101
101
101
75
101
75
101
75
74.5
74.5
79
79
97
97
112
A
58
58
58
58
58
58
58
58
58
58
44
44
44
44
50
50
57
D
28
28
28
28
28
8.5
28
8.5
28
8.5
18
18
22.5
22.5
30
30
34.5
EB
28
28
28
28
28
28
28
28
28
28
38
38
38
38
58
58
73
C
52
52
52
52
52
52
52
52
52
52
58
58
58
58
76
76
90
mm
Connectori & F Models z-H, i-H Models
DA
EDA
E B
C
Model
Accuracy 0.2% of full scale.
Features ARCII technology, an instant auto-recognitionsystem of the BLRTSX connected to the PTT or LTT.
The common brush bounce that plagues the accuracytesting of pulse tools is cured when using a BLRTSX.
Provides consistent andreliable torque readings foruse with power driventorque control tools.
RUN DOWNADAPTERS
See Page 01.20
BLRTSX CABLE
For connecting toPTT or LTT
Item #072001
CONNECTIONA = Ground
(Shunt Calibration)
C = Torque Output
D = Ground (Torque Output)
E = Ground (Supply)
F = Supply, 11-26 VDC, 1 W
K = Shunt Calibration
M = Shield
B/G/H/J/L = N/A
A
E
D
C
F
B
GM
H
JL
K
7 - 20 cN.m
7 - 49 cN.m
18 - 98.8 cN.m
22.5 - 203 cN.m
56.5 - 565 cN.m
56.5 - 565 cN.m
113 - 1130 cN.m
113 - 1130 cN.m
180 - 1807 cN.m
180 - 1807 cN.m
2.5 - 25 N.m
5 - 50 N.m
10 - 100 N.m
16 - 160 N.m
25 - 250 N.m
50 - 500 N.m
100 - 1000 N.m
10 - 28 ozf.in
10 - 70 ozf.in
25 - 140 ozf.in
2 - 18 lbf.in
5 - 50 lbf.in
5 - 50 lbf.in
10 - 100 lbf.in
10 - 100 lbf.in
16 - 160 lbf.in
16 - 160 lbf.in
2 - 18 lbf.ft
4 - 36 lbf.ft
8 - 73 lbf.ft
12 - 118 lbf.ft
19 - 184 lbf.ft
37 - 368 lbf.ft
74 - 738 lbf.ft
BLRTSX28z-H
BLRTSX70z-H
BLRTSX140z-H
BLRTSX18i-H
BLRTSX50i-H
BLRTSX50i
BLRTSX100i-H
BLRTSX100i
BLRTSX160i-H
BLRTSX160i
BLRTSX18F
BLRTSX36F
BLRTSX73F
BLRTSX118F
BLRTSX184F
BLRTSX368F
BLRTSX738F
170225
170226
170227
170228
170229
170230
170231
170232
170233
170234
170235
170236
170237
170238
170239
170240
170241
Item # S.I.AmericanModelTorque Ranges
1/4 Male/Hex
1/4 Male/Hex
1/4 Male/Hex
1/4 Male/Hex
1/4 Male/Hex
1/4 Female/Square
1/4 Male/Hex
1/4 Female/Square
1/4 Male/Hex
1/4 Female/Square
3/8 Female/Square
3/8 Female/Square
1/2 Female/Square
1/2 Female/Square
3/4 Female/Square
3/4 Female/Square
1 Female/Square
1/4 Female/Hex
1/4 Female/Hex
1/4 Female/Hex
1/4 Female/Hex
1/4 Female/Hex
1/4 Male/Square
1/4 Female/Hex
1/4 Male/Square
1/4 Female/Hex
1/4 Male/Square
3/8 Male/Square
3/8 Male/Square
1/2 Male/Square
1/2 Male/Square
3/4 Male/Square
3/4 Male/Square
1 Male/Square
BLRTSX28z-H
BLRTSX70z-H
BLRTSX140z-H
BLRTSX18i-H
BLRTSX50i-H
BLRTSX50i
BLRTSX100i-H
BLRTSX100i
BLRTSX160i-H
BLRTSX160i
BLRTSX18F
BLRTSX36F
BLRTSX73F
BLRTSX118F
BLRTSX184F
BLRTSX368F
BLRTSX738F
Input Output
DRIVE SIZEinches
Model
Supplied with NIST-TraceableCertification of Calibration
CERTIFIED
SPECIFICATIONSRated Output: 5VDC 0.2% FS
Excitation Recommended: 11VDC to 26VDC (pole secure)
Nonlinearity: 0.2% FS
Usable Temperature Range 41 - 122 F
Mating Connector: Tuchel Series 581 (98-2030-09-12)
Safe Overload: 150% of Rated Output
PLUG & PLAY
Threads for mountingM4, 6mm depth
BLRTSX-R/RA
01.13
Transducers
Non-contact signal transfer and maintenance free.
KEY FEATURES
Compact design & bi-directional.
A = Ground (Shunt Calibration)
C = Torque Output
D = Ground (Torque Output)
E = Ground (Supply)
F = Supply, 11-26 VDC, 1 W
K = Shunt Calibration
M = Shield
B/G/H/J/L = N/A
BLRTSX-R PIN CONNECTION
BLRTSX-R/RA
Used in-line with rotating shafts or nutrunners for feed back control.Motor testings, high RPM Tools or rotational measurementapplications.
RA Models:- Angle output 2-channel quadrature- 360 pulses per rotation- Ability to measure the rotation angle of a fastener- Joint rate & breakaway torque can be measured too
BLRTSX-RA PIN CONNECTION
170260
170261
170262
170263
170264
170265
170266
170267
170268
170269
170270
170271
170272
170273
170274
170275
BLRTSX140z-R
BLRTSX140z-RA
BLRTSX18i-R
BLRTSX18i-RA
BLRTSX44i-R
BLRTSX44i-RA
BLRTSX89i-R
BLRTSX89i-RA
BLRTSX177i-R
BLRTSX177i-RA
BLRTSX36F-R
BLRTSX36F-RA
BLRTSX73F-RA
BLRTSX148F-RA
BLRTSX368F-RA
BLRTSX738F-RA
18 - 98.8 cN.m
18 - 98.8 cN.m
22.5 - 203 cN.m
22.5 - 203 cN.m
45.2 - 497 cN.m
45.2 - 497 cN.m
113 - 1005 cN.m
113 - 1005 cN.m
203.4 - 2000 cN.m
203.4 - 2000 cN.m
5 - 50 N.m
5 - 50 N.m
10 - 100 N.m
20 - 200 N.m
50 - 500 N.m
100 - 1000 N.m
Torque RangesItem # S.I.AmericanModel
A FB C D E G N
25 - 140 ozf.in
25 - 140 ozf.in
2 - 18 lbf.in
2 - 18 lbf.in
4 - 44 lbf.in
4 - 44 lbf.in
10 - 89 lbf.in
10 - 89 lbf.in
18 - 177 lbf.in
18 - 177 lbf.in
4 - 36 lbf.ft
4 - 36 lbf.ft
8 - 73 lbf.ft
15 - 148 lbf.ft
37 - 368 lbf. ft
74 - 738 lbf.ft
DIMENSIONSmm
92
92
92
92
92
92
92
92
108
104
108
104
125
125
197
197
17
17
17
17
17
17
17
17
32
23
32
23
30.5
30.5
62
62
28
28
28
28
28
28
28
28
38
38
38
38
58
58
73
73
52
52
52
52
52
52
52
52
58
58
58
58
76
76
90
90
10
10
10
10
10
10
10
10
19
16
19
16
28
28
42
42
16
16
16
16
16
16
16
16
30
20
30
20
27
27
58
58
Model
58
58
58
58
58
58
58
58
44
59
44
59
64
64
73
73
Shaft
Shaft
Shaft
Shaft
Shaft
Shaft
Shaft
Shaft
*
*
*
*
*
*
*
*
BLRTSX140z-R
BLRTSX140z-RA
BLRTSX18i-R
BLRTSX18i-RA
BLRTSX44i-R
BLRTSX44i-RA
BLRTSX89i-R
BLRTSX89i-RA
BLRTSX177i-R
BLRTSX177i-RA
BLRTSX36F-R
BLRTSX36F-RA
BLRTSX73F-RA
BLRTSX148F-RA
BLRTSX368F-RA
BLRTSX738F-RA
A
E
D
C
F
B
GM
H
JL
K
BLRTSX-R/RA CABLE
For connecting a BLRTSX-R/RA tothe PTT or LTT.
Item #072001
Brushless Rotary Torque & Angle Shaft Transducer with ARCII Technology
Connector
140z -36F Models 73F - 738F Models
GA
B
C
E
F GA
E
F
N D
Supplied with NIST-TraceableCertification of Calibration
CERTIFIED
NOTE!For optimum performance, it isrecommended to utilize coupling in order tominimize extraneous load & moments due tomisalignment. Contact customer service forinformation.
D
Features ARCII technology, an instant auto-recognition system ofthe BLRTSX-R/RA connected to the PTT or LTT.
Accuracy 0.2% of full scale.
R models are Torque only transducers.RA models are Torque & Angle tranducers.* With feather keyways (2x180 )
A = Ground (Shunt Calibration)
B = Angle1 Speed
C = Torque Output
D = Ground (Torque Output)
E = Ground (Supply)
F = +12V (Supply)
G = Angle 2 (90 running after Angle 1)
H = +5V (Angle Voltage)
K = Shunt Calibration
M = Shield
J/L = N/A
SPECIFICATIONSRated Output: 5VDC 0.2% FS
Excitation Recommended: 11VDC to 26VDC (pole secure)
Nonlinearity: + 0.2% FS
Usable Temperature Range: 41 - 122 F
Mating Connector: Tuscel Series 581 (98-2030-09-12)
Safe Overload: 150% of Rated Output
800.456.1828
PLUG & PLAY
BLRTSX-RAU
01.14
BLRTSX-RAUBrushless Rotary Torque & Angle Transducer with Mounting Base and ARCII Technology
Transducers
KEY FEATURES
BLRTSX-RAU CABLE
For connecting to a PTT or LTT.
Item #072001
Supplied with NIST-Traceable Certification of Calibration
CERTIFIED
Non-contact signal transfer and maintenance free.
Compact design & bi-directional.
Used for a variety automotive applications like starters,alternators, wiper motors, ABS, brakes, clutches, servosteering components, etc.
Ability to measure the rotation angle of a fastener. Joint rate& breakaway torque can be measured too.
170276
170277
170278
170279
170280
170281
BLRTSX140z-RAU
BLRTSX18i-RAU
BLRTSX44i-RAU
BLRTSX89i-RAU
BLRTSX177i-RAU
BLRTSX36F-RAU
18 - 98.8 cN.m
22.5 - 203 cN.m
45.2 - 497 cN.m
113 - 1005 cN.m
203.4 - 2000 cN.m
5 - 50 N.m
Torque RangesItem # S.I.AmericanModel
25 - 140 ozf.in
2 - 18 lbf.in
4 - 44 lbf.in
10 - 89 lbf.in
18 - 177 lbf.in
4 - 36 lbf.ft
DIMENSIONSmm
A
90
90
90
90
106
106
H
45
45
45
45
63
63
B
58
58
58
58
85
85
C
83
83
83
83
102
102
D
45
45
45
45
60
60
E
7
7
7
7
9
9
Model I
10
10
10
10
14
14
J
15
15
15
15
22
22
BLRTSX140z-RAU
BLRTSX18i-RAU
BLRTSX44i-RAU
BLRTSX89i-RAU
BLRTSX177i-RAU
BLRTSX36F-RAU
M
16
16
16
16
23
23
L
58
58
58
58
59
59
N
12
12
12
12
15
15
O
28
28
28
28
38
38
Features a built-in mounting base.
Motor testing, high RPM tools or rotational measurementapplications.
Angle output: 2-channel quadrature, 360 pulses per rotation.
NOTE!For optimum performance, it is recommended to utilize couplingin order to minimize extraneous load & moments due tomisalignment. Contact customer service for more information.PTT
A portable, accurate andversatile Torque & AngleAnalyzer that fits comfortablyin the hand.
See Page 01.4
Connector
LA
20
I
J
21
14
M
Measuring End
D
B
10
H
O
E
C
N
MOUNTING BASETop view of BLRTSX-RAUshows adjustable position ofthe mounting base.
Accuracy 0.2% of full scale.
Features ARCII technology, an instant auto-recognitionsystem of the BLRTSX-RAU connected to the PTT or LTT.
CONNECTION
A = Ground (Shunt Calibration)
B = Angle 1 Speed
C = Torque Output
D = Ground (Torque Output)
E = Ground (Supply)
F = Supply, 11-26 VDC, 1 W
G = Angle 2 (90 running after Angle 1)
H = +5V (Angle Voltage)
J = N/A
K = Shunt Calibration
M = Shield
L = N/A
A
E
D
C
F
B
GM
H
JL
K
SPECIFICATIONSRated Output: 5VDC 0.2% FS
Excitation Recommended: 11VDC to 26VDC (pole secure)
Nonlinearity: + 0.2% FS
Usable Temperature Range 41 - 122 F
Mating Connector: Tuchel Series 581 (98-2030-09-12)
Safe Overload: 150% of Rated Output
PLUG & PLAY
Transducers SDXTorque Screwdriver Transducer with ARCII Technology
Transducer for auditing or tightening fasteners to aspecified torque when mated with a torque analyzer.
Ergonomic rubber grip and stainless steelFemale/Hex bit holder.
KEY FEATURES - SDX
800.456.1828
SDX & ETX
01.15
SDX10i
SDX50i
11.3 - 113 cN.m
56.5 - 565 cN.m
Torque RangesItem # S.I.
1 - 10 lbf.in
5 - 50 lbf.in
AmericanModel
078000
078001
SDX10i
SDX50i
Model Drive Size
1/4" Female/Hex
1/4" Female/Hex
Length
6"
6"
Width
1 1/2"
1 1/2"
Weight
0.5 lbs.
0.5 lbs.
ETXTorque Wrench Transducer with ARCII Technology
Connect to a torque analyzer to monitor, test oraudit a fastener.
Safe Overload: 125% of Rated Output.
CABLES - SDX
For connecting to PTT or LTTItem #072004
For connecting to Wizard PlusItem #065182
A = Signal (+)
B = Signal (-)
C = Excitation (-)
D = Excitation (+)
E/F = N/A
SDX CONNECTION
A
CD
E B
F
Designed for monitoring, testing, and auditingfasteners.
Bi-directional.
KEY FEATURES - ETX
Non-length dependent.
Robust design and fixed head.
Safe Overload: 125% of Rated Output.
Connect With A:
LTTConnect to a torque analyzerto monitor, test or audit afastener.
See Page 01.3
ETX10
ETX30
ETX100
ETX300
1 - 10 N.m
3 - 30 N.m
10 - 100 N.m
30 - 300 N.m
Torque RangesItem # S.I.
9 - 89 lbf.in
2.5 - 22 lbf.ft
8 - 75 lbf.ft
22 - 220 lbf.ft
AmericanModel
020176
020177
020178
020179
ETX10
ETX30
ETX100
ETX300
Model Square Drive
1/4"
1/4"
3/8"
1/2"
Length
8 1/2"
8 1/2"
17 1/2"
26"
Width
1 1/4"
1 1/4"
1 5/8"
2"
Weight
9 oz.
9 oz.
1.5 lbs.
2.4 lbs.
CABLES - ETX
For connecting to PTT or LTTItem #072006
For connecting to Wizard PlusItem #065188
A = Signal (-)
B = Signal (+)
C = Excitation (-)
D = Excitation (+)
E = Memory Circuit Digital Clock
F = Memory Circuit Digital I/O
ETX CONNECTION
A
CD
E B
F
Accuracy 0.25% of full scale.
Features ARCII technology, an instant auto-recognition system of the SDX connected to thePTT or LTT.
Accuracy 1% of full scale.
Features ARCII technology, an instant auto-recognition system of the ETX connected to thePTT or LTT.
Can be used for Just Move and Breakawaytorque tests.
PLUG & PLAY
Supplied with NIST-Traceable Certification of Calibration
CERTIFIED
SMX
01.16
SMXTorque Socket Transducer with ARCII Technology
Transducers
Various models that range 2.5 lbf.in to 500 lbf.ft.
Compact and robust housing.
Bi-directional.
KEY FEATURES
Converts any ratchet wrench into torque sensor.
Ideal for applications with limited space accessibility.
SMX25i
SMX50i
SMX100i
SMX50F
SMX200F
SMX500F
071020
071021
071022
071023
071024
071025
Item # S.I.AmericanModelTorque Ranges
28.2 - 282.5 cN.m
56.5 - 565 cN.m
113 - 1130 cN.m
6.8 - 67.8 N.m
27.1 - 271 N.m
67.8 - 678 N.m
2.5 - 25 lbf.in
5 - 50 lbf.in
10 - 100 lbf.in
5 - 50 lbf.ft
20 - 200 lbf.ft
50 - 500 lbf.ft
2.9 - 28.8 kgf.cm
5.8 - 57.6 kgf.cm
11.5 - 115 kgf.cm
0.7 - 6.9 kgf.m
2.8 - 27.6 kgf.m
6.9 - 69.1 kgf.m
Metric
TITAN TORQUE WRENCHConnect the SMX tothe square drive of awrench and monitorthe torque applied.
CALIBRATION HEXSTEP ADAPTER
Allows multiple sizewrenches to be usedwith one adapter.
See Page 01.20
1/4"
1/4"
1/4"
3/8"
1/2"
3/4"
Square Drive
SMX25i
SMX50i
SMX100i
SMX50F
SMX200F
SMX500F
DRIVE SIZE & DIMENSIONS
2 (50.8)
2 (50.8)
2 (50.8)
3 (76.2)
3.5 (89)
5 (127)
A B
.56 (14.2)
.56 (14.2)
.56 (14.2)
.73 (18.5)
.98 (24.9)
1.48 (37.6)
C
1 (25.4)
1 (25.4)
1 (25.4)
1.12 (28.6)
1.25 (31.8)
2 (50.8)
inches
Model
C
AB
Rated Output: 2 mV/V Nominal
Zero Balance: 2% of Rated Output
Safe Overload: 125% of Rated Output
Excitation (VDC or VAC): 10 Recommended, 18 Maximum
Bridge Resistance: 1000 Ohms Nominal
Nonlinearity: 0.2% of Rated Output
Operating Temperature: -40 to 180 F (-40 to 82 C)
SPECIFICATIONS
Features ARCII technology, an instant auto-recognition system of the SMXconnected to the PTT & LTT.
Accuracy 0.25% of full scale.
For Torque Screwdrivers, Torque Wrenches & Electric Screwdrivers, askfor our Assembly Tools catalog.
ISO 9001and ISO 17025 Company
PLUG & PLAY
Supplied with NIST-Traceable Certification of Calibration
CERTIFIED
Calibration Equipment
Loading BenchCalibrating Wrenches
A calibration system designed to enable accurate calibration oftorque wrenches.
The laboratory grade instrument assures accurate torquecalibration and pre-setting, independent of human influence ortransducer side and end load factors.
KEY FEATURES
Built for durable use, the Loading Bench reduces the operatoreffort required to attain and sustain torque during thecalibration process.
Models that range from 0 - 2000 lbf.ft
BMX TRANSDUCERFor calibrating manualor power tools orspecial applications.A wide torque rangeselection, from 2 ozf.into 20,000 lbf.ft.
See Page 01.8
Torque Range: Max. 250 lbf.ft (3000 lbf.in).
Reaction Position:Horizontally: 4" to 28" from the center of the turn-table.Vertically: 1" to 4" from the turn-table base.
Weight: 53 lbs.
Size: 37.5" W x 12" H x 10.75" D
Item #063302
LB250F
800.456.1828
LOADING BENCH
01.17
Large wheel for smooth manual loading.
Operates in both clockwise and counterclockwise directions.
Torque Range: Max. 750 lbf.ft (9000 lbf.in).
Reaction Position:Horizontally: 4.87" to 41.25" from the center of the turn-table.Vertically: 1.87" to 5.4" from the turn-table base.
Weight: 130 lbs.
Size: 50" W x 15" H x 15.5" D
Item #063301
LB750FTorque Range: Max. 2000 lbf.ft (24000 lbf.in).
Reaction Position:Horizontally: 4.87" to 75.5" from the center of the turn-table.Vertically: 1.87" to 5.4" from the turn-table base.
Weight: 160 lbs.
Size: 84.75" W x 15" H x 15.5" D
Item #063300
LB2000F
WIZARD PLUS TORQUE ANALYZERThe easy to use torque analyzer is idealfor SPC testing & ISO 6789 testing. Itfeatures the ability to produce Certificatesto ISO 6789:2003.
The drive system assures the load application, eliminating theoperator induced test error.
Use with a Mountz BMX transducer and torque analyzer.
Mountable for bench or a cabinet.
NOTE!It is recommended that the Loading Bench be fastened to a bench top.
LB750F(BMX Transducer not included)
See Page 01.5
Calibration TestFor Torque Analyzers & Torque Transducers
Calibration Equipment
Calibration
Test Equipment
01.18
Step 2: Select Hangers
2 lbs.
5 lbs.
Stainless Steel (Class F)
Stainless Steel (Class F)
110044
110043
Item # WeightModel
9 1/4"
16"
Stem
Step 3: Select Weights
0.25 oz.
0.50 oz.
1 oz.
2 oz.
4 oz.
8 oz.
16 oz.
32 oz.
40 oz.
0.5 lbs.
1 lb.
2 lbs.
5 lbs.
10 lbs.
20 lbs.
50 lbs.
Stainless Steel Hook (Class 3)
Stainless Steel Hook (Class 3)
Stainless Steel Hook (Class 3)
Stainless Steel Hook (Class 3)
Stainless Steel Hook (Class 3)
Stainless Steel Hook (Class 3)
Stainless Steel Hook (Class 3)
Stainless Steel Hook (Class 3)
Stainless Steel Hook (Class 3)
Stainless Steel Slotted (Class F)
Stainless Steel Slotted (Class F)
Stainless Steel Slotted (Class F)
Stainless Steel Slotted (Class F)
Stainless Steel Slotted (Class F)
Stainless Steel Slotted (Class F)
Stainless Steel Slotted (Class F)
110050
110051
110052
110053
110054
110055
110056
110057
110058
110047
110046
110045
110041
110042
110070
110071
Item # WeightModel
Calibrated Dead Weights are the official means by whichtorque analyzers and transducers are traced to the Nationalor International Standards such as NIST, ISO, and others.There are 3 components that compose of a Dead WeightTest Set: (1) Segment Arm or Wheel, (2) Hanger, and(3) Weights.
25 lbs.
75 lbs.
100 lbs.
75 lbs.
100 lbs.
100 lbs.
200 lbs.
125 lbs.
200 lbs.
S-10
S-10
S-10
S-12
S-12
S-24
S-24
S-48
S-48
061106
060094
060056
060052
060093
060091
060053
060090
060054
Item # Max Wt.Model
± .005
± .005
± .005
± .006
± .006
± .012
± .012
± .024
± .024
Tolerance
1/4"
3/8"
1/2"
3/8"
1/2"
1/2"
3/4"
3/4"
1"
Input Dr.
10"
10"
10"
12"
12"
24"
24"
48"
48"
Length
SEGMENT ARMS
Step 1:Select either:Segment Armsor Wheels
50 oz.
20 lbs.
50 lbs.
1.0*
2.0**
4.0**
061587
060095
060064
Item # Max Wt.Model
± .0005
± .001
± .002
Tolerance
1/4"
1/4" & 3/8"
1/4" & 3/8"
Input Dr.
1"
2"
4"
Radius
WHEELS (pictured upper right photo)
*Shape: Circular **Shape: Butterfly
EZ-TorQ CALIBRATION KITThe EZ-TorQ analyzer includes theEZ Calibration software formultipoint calibrations. Forperforming the calibration acalibration wheel, hanger andweights are required.
Mounts offers calibration kits forcalibrating the EZ-TorQ. The kitsinclude a wheel, hanger andweights.
Calibration KitEZ-TorQ 10i (American)Item #061279
Calibration KitEZ-TorQ 50i & 100i (American)Item #061280
Hook Weight Slotted Weight Hanger
Equipment
TOTAL WEIGHTWeights are placed upon the Hanger, which ishung from the Segment Arm or Wheel. Theamount of total weight needed is determinedby the maximum torque range of the analyzer ortransducer being calibrated and the length ofthe Segment Arm or Wheel.
NOTE!Total weight includesboth the Hanger and theStainless Steel Weight(s).
Calibration Stands
The stand keeps the Rotary Transducer in a stable position for thecalibration process.
Supplied with Pin Adapters and In/Out Adapters.
ROTARY FIXTURE STAND
Calibration Wheel(s), Hanger(s), Weight(s), and Torque Analyzer arerequired for calibration of a Rotary Transducer. See Page 01.18
CALIBRATION STANDS
01.19
Model: RFS-200
Torque Range: 1 - 200 lbf.in
Dimensions: 5 1/2" x 7 1/4" x 2 3/4"
Item #060234
Model: RFS-500
Torque Range: 5 - 500 lbf.ft
Dimensions: 8" x 11" x 4 1/4"
Item #062032
Pin
Adapters
In / Out
Adapters
Model: MB-1
Works with: BMX20z - BMX500F
LPX 10z - 20i
All EZ-TorQ Models
Dimensions: 4" x 3" x 4"
Item #062109
Model: MB-3
Works with: BMX1000F - BMX5000F
Dimensions: 8" x 7 7/8" x 8"
Item #062128BMX CALIBRATION
A BMX transducer is securely mounted forcalibrating a torque wrench using a MountingBracket. Keeping the transducer in a stableposition ensures the accuracy of the torquemeasurement during operation.
Mounting Brackets
RTSX TRANSDUCER(rotary style)
1 lbf.in - 1500 lbf.ftFor power tools and rotationmeasurement.
See Page 01.9
AccessoriesTorque Analyzers and Transducers
Accessories
ACCESSORIES
01.20
Designed to provide consistent andreliable torque readings for use withpower driven torque control tools.
Adapter is mounted in-line betweentool drive and a transducer.
Hardened thread componentsincrease accuracy and life.
Non-rotating body for improved safety.
Square drives conform to ASMEB107 standards for proper fit.
Compact size and lightweight.
Operates in clockwise direction only.After each run down, the RDAshould be completely backed-up.
11.3 - 113 cN.m
28 - 282.5 cN.m
56.5 - 565 cN.m
113 - 1130 cN.m
282.5 - 2825 cN.m
6.8 - 67.8 N.m
847 - 8473 cN.m
13.6 - 135.6 N.m
33.9 - 339 N.m
67.8 - 678 N.m
135.6 - 1355 N.m
339 - 3389 N.m
678 - 6779 N.m
1 - 10 lbf.in
2 - 25 lbf.in
5 - 50 lbf.in
10 - 100 lbf.in
25 - 250 lbf.in
5 - 50 lbf.ft
75 - 750 lbf.in
10 - 100 lbf.ft
25 - 250 lbf.ft
50 - 500 lbf.ft
100 - 1000 lbf.ft
250 - 2500 lbf.ft
500 - 5000 lbf.ft
RDA-10i
RDA-25i
RDA-50i
RDA-100i
RDA-250i
RDA-50F
RDA-750i
RDA-100F
RDA-250F
RDA-500F
RDA-1000F
RDA-2500F
RDA-5000F
063970
063971
063972
063973
063974
063978
063977
063981
063982
063983
063991
063990
063992
Item # Sq. DriveAmericanModelTorque Ranges
1/4"1/4"1/4"1/4"1/4"3/8"3/8"1/2"1/2"3/4"1"11/2"11/2"
RUN DOWN ADAPTERS
S.I.
Ideal for testing and recording the results of power tools with atorque analyzer or sensor. Not recommended for pulse tools.
Operates in clockwise direction only. Once the tool shuts off, theAURA automatically unwinds for the next run down. Eliminates theneed to back it out.
Designed to provide consistent and reliable torque readings for usewith power driven torque control tools.
Adapter is mounted in-line between tool drive and transducer.
Compact size and lightweight.
Includes two springs to cover the torque range 1 - 50 lbf.in
25 - 50 lbf.in
25 - 50 lbf.in
1 - 25 lbf.in
1 - 25 lbf.in
AURA
AURA
063292
063293
Item # Heavy SpringLight SpringModelTorque Ranges
1/4" F/Sq.
1/4" F/Sq.
17mm Hex
1/4 M/Sq.
AURA ADAPTER(Auto Reversing Run Down Adapter)
DriveOutput
DriveInput
11/16"7/16"3/8"7/32"17mm
12mm
8mm
7mm
6mm
5mm
3/4"1/2"1/2"1/4"19mm
13mm
9mm
9mm
8mm
5.5mm
American
American
American
American
Metric
Metric
Metric
Metric
Metric
Metric
061500
061501
061527
061502
061503
061504
061505
061529
061528
061506
Item # BAModelDimensions
CALIBRATION HEX STEP ADAPTERS
5/8"3/8
1/4"3/16"16mm
11mm
7mm
5mm
4mm
4.5mm
9/16"5/16"1/8"1/8"14mm
10mm
6mm
3mm
2mm
4mm
7/8"11/16"7/16"7/16"7/32"17mm
15mm
14mm
12mm
8mm
5mm
1"3/4"9/16"1/2"1/4"19mm
17mm
16mm
13mm
9mm
5.5mm
American
American
American
American
American
Metric
Metric
Metric
Metric
Metric
Metric
061537
061524
061531
061525
061530
061543
061542
061541
061540
061539
061538
Item #Model
3/4"5/8"5/16"3/8"3/16"16mm
13mm
12mm
11mm
7mm
4.5mm
5/8"9/16"3/16"5/16"1/8"14mm
11mm
10mm
10mm
6mm
4mm
3/8" Square Drive
1/4" Square Drive
C D
BADimensions
C D
CD
AB
11.3 - 113
56.5 - 565
113 - 1130
169.5 - 1695
1 - 10
5 - 50
10 - 100
15 - 150
RDA
RDA
RDA
RDA
070600
070605
070610
070615
Item # Drive Outputlbf.inModelTorque Ranges
17mm Hex
17mm Hex
17mm Hex
17mm Hex
cN.m Drive Input
5mm Hex
6mm Hex
6mm Hex
6mm Hex
Designed to provide consistent and reliable torque readings foruse with power driven torque control tools.
Adapter is mounted in-line between tooldrive and a transducer.
Compact size and lightweight.
SPRING RUN DOWN ADAPTERS for EZ-TorQ
Operates in clockwise direction only.
Compatible with only theEZ-TorQ Analyzer.
ISO 9001and ISO 17025 Company
01.21
ACCESSORIES
Connects 1-4 transducers to the Torque Analyzer and switches between thetransducers manually or automatically.
Eliminates the need to plug and unplug transducers.
KEY FEATURES
When the PTT or LTT is connected to the Multiplexer it reviews the Multiplexer (Mux) to determine what transducersare connected and downloads the identity and calibration data for each of the attached transducers.
This combination provides a flexible, time saving solution that reducesthe potential for operator error. For users that have many Tool Testsand using multiple torque transducers, these two accessories are the
ideal solution for torque testing.
MULTIPLEXER
Size (W x L x H): 6 3/4" x 6 3/4" x 1 3/8"Weight: 1.3 lbs.
Item #072998
MULTIPLEXER
& BAR CODE
READER
for PTT and LTT
for PTT and LTT
Designed to scan Bar Codes on tools and start ToolTests automatically.
Reduces operational time for users with a large numberof Tool Tests stored in the analyzer.
KEY FEATURES
The PTT or LTT are designed to work with this barcode reader.
BAR CODE READER Item #072997
Multiplexer
800.456.1828
Bar Code Reader
Operating Multiplexer and BarCode Reader with PTT or LTT
TorqueMateWrench
01.22
2 - 20
2 - 20
5 - 50
5 - 50
10 - 100
10 - 100
15 - 150
15 - 150
25 - 250
25 - 250
1.4 - 14
1.4 - 14
3.6 - 36
3.6 - 36
7.3 - 73
7.3 - 73
11 - 110
11 - 110
18.4 - 184
18.4 - 184
TMW20
TMW20A
TMW50
TMW50 A
TMW100
TMW100A
TMW150
TMW150A
TMW250
TMW250A
240180
240181
240182
240183
240184
240185
240186
240187
240188
240189
Item # N.mlbf.ftModelTorque Ranges
TorqueWrenches
Microprocessor controlled digital memory wrench for delivering precision torque and storing &downloading torque readings.
Ideal for torque measurement and auditing in R&D, QC, a lab, maintenance and production areas.
Large LED screen for high visibility.
Bi-directional operation with built-in ratchet head.
Programmable pre-sets up to 99 pre-sets of torque or torque & angle* can be programmed on wrench oruploaded from PC (software provided), all with individual minimum and maximum limits or percentagetolerances. Audible and visual alarms signal approach and achievement of preset torque values.
Over torque warning system.
The recalibration period can be set by cycles and/or time.
TorqueMate Wrench
Electronic Torque Wrench
Torque
Torque & Angle
Torque
Torque & Angle
Torque
Torque & Angle
Torque
Torque & Angle
Torque
Torque & Angle
Measures
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
16 1/8
16 1/8
16 1/8
16 1/8
16 1/8
16 1/8
24 1/2
24 1/2
24 1/2
24 1/2
410
410
410
410
410
410
625
625
625
625
1.9
1.9
1.9
1.9
1.9
1.9
2.9
2.9
2.9
2.9
0.85
0.85
0.85
0.85
0.85
0.85
1.3
1.3
1.3
1.3
Weightkg.lbs.
Lengthmminches
SquareDrive
Can store torque readings with a time and date stamp.
Selectable languages and units of measurement.
For angle models, both torque and angle values are displayed simultaneously.
OperationModes
Peak, Pre-set, Set, Recall, Upload, Clear, Date, Language, Units, Track, Backlite, Com(First Movement*, Torque & Angle*)
Units ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.cm, kgf.m
Alarms Preset Value Approach, Fastener Overload, Range Overload, Mechanical Overload,Low Battery, Memory Full.
Data Memory 2094 values
Display Digits Four
Power 4 x AA Batteries
Languages Chinese, English, French, German, Italian, Japanese, Polish,Portuguese, Russian & Spanish
* For Torque & Angle Models only.
SPECIFICATIONS
OLED DISPLAYThe TorqueMate electronic torque wrench ensures product quality, cost savings and a reduction in over-allproduction failures through complete monitoring of the fastening and assembly process with full data collectionof the measured values.
Accuracy 1% of reading from 10% to 100% of full scale.
Soft texture ergonomic grip.
USB cable for data transfer - Windows, MS Excel, SPC compatible. Additional download can be madein ASCII or binary format.
Note: Larger models available upon request.
Track Mode
Displays ActualTorque as Applied
Preset Mode
Screen Changes Coloras Preset Torque Reached
Recall
Store & View 2000+Results or Upload
to PC or SPC
TRACK
0000 Nm
Preset 1
0565Menu Menu
Preset 1
0750Menu
Nm Nm
Loc 7 PeakMenu
Nm
II.89Nm
Select
TORQUE MULTIPLIERCATALOG(24 page, PDF format only)Hand Torque MultipliersPneumatic Torque MultipliersElectric Torque MultipliersAccessories
ASSEMBLY TOOL& ACCESSORYCATALOG(76 page, Print or PDF format)Hand Torque ScrewdriversElectric Torque ScrewdriversTransformersAdapters, Bits, Bit Holders,Setters, Sockets
CORPORATE HEADQUARTERS1080 North 11th StreetSan Jose CA 95112t 408.292.2214t 800.456.1828f [email protected]
DISTRIBUTION & SERVICECENTER19051 Underwood RoadFoley AL 36535t 251.943.4125f 251.943.4979
US & CANADA SALES OFFICESAnaheim, Boston, Charlotte, Chicago,Cleveland, Dallas, El Paso, Los Angeles,Minneapolis, Nashville, Phoenix,Seattle, San Jose, Toronto
MAIN OFFICE &SERVICE CENTERAv. Cristobal Colon #15343Col. Paseos de ChihuahuaChihuahua, Chih. Mexico CP 31125t 614.481.0023f 614.481.0053
MOUNTZ MEXICO SA de CV
MEXICO SALES OFFICESTijuana, Cd. Juarez, Chihuaha,Reynosa, Monterrey, Mexico DF,Guadalajara
Mountz MC14-Rev 2 catalog Copyright 2010 all rights reserved
Metric FastenersInch FastenersElectronic HardwareLocal Parts CounterInventory Management
Ask a Mountz customer service representative for a copy.
MOUNTZ CATALOGS AVAILABLE
PNEUMATIC AIRTOOL CATALOG(18 page, PDF format only)Pneumatic ScrewdriversPulse ToolsTorque Arms
HYBRID TORQUECONTROL SYSTEMBROCHURE