mountz torque analyzer & test measurement catalog...1.2 - 11.5 kgf.cm 2.9 - 28.8 kgf.cm 5.8 -...

LTT SeriesTorque, Angle & Force Analyzer with ARCII Technology

TorqueLab

LTT

01.1

TorqueAnalyzers

Recommended for all hand screwdrivers, wrenches, or power tools.

KEY FEATURES

Features a built-in transducer and can connect to an external torque sensor.

LTT10i

LTT25i

LTT50i

LTT100i

LTT250i

LTT50F

LTT100F

LTT250F

Torque RangesItem #

11.3 - 113 cN.m

28.25 - 282.5 cN.m

56.5 - 565 cN.m

113 - 1130 cN.m

282.5 - 2825 cN.m

6.8 - 67.8 N.m

13.56 - 135.6 N.m

33.9 - 339 N.m

S.I.

1 - 10 lbf.in

2.5 - 25 lbf.in

5 - 50 lbf.in

10 - 100 lbf.in

25 - 250 lbf.in

5 - 50 lbf.ft

10 - 100 lbf.ft

25 - 250 lbf.ft

AmericanModel

068400

068401

068402

068403

068404

068405

068406

068407

1.2 - 11.5 kgf.cm

2.9 - 28.8 kgf.cm

5.8 - 57.6 kgf.cm

11.5 - 115 kgf.cm

28.8 - 288 kgf.cm

0.7 - 6.9 kgf.m

1.4 - 13.8 kgf.m

3.5 - 34.5 kgf.m

1/4" F/Sq

1/4" F/Sq

1/4" F/Sq

1/4" F/Sq

1/4" F/Sq

3/8" F/Sq

1/2" F/Sq

1/2" F/Sq

Drive Size

8 lbs.

8 lbs.

8 lbs.

8 lbs.

8 lbs.

8 lbs.

8 lbs.

8 lbs.

Wt.Metric

NOTE!Since a tester cannot always duplicate actual jointcharacteristics, the torque reading displayed on the LTT mayvary from the actual torque that a tool will apply to a joint.When critical assemblies are involved, the torque output of thepower tool being used should be verified on the actualassembly using a calibrated measuring torque tool.

Selection of six operation modes:Track, Peak, First Peak, Audit, Spindle Audit, and Torque + Angle

Seven units of torque measurements:ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm

Two units of force measurement: lbf and kN

Features built-in Tool Tests operation.

Three PC Windows based software programs: Mountz Torque Meter Interface Program for sensor calibrations, meter calibration and tool tests. Torque Meter Bootloader for updating the LTT operating systems. Excel Add-In for Real-Time data collection into an Excel spreadsheet. It provides statistics calculations.

Five low-pass filters: 3000, 2000, 1500, 500, and 200Hz

Six-digit display and easy to read menu structure.

Real Time Clock for time stamping of readings.

USB interface to download readings to PC.

High Capacity Li-ion Batteries for long life (30 hours with standard torquesensors and 16 hours with brushless rotary sensors).

Can connect to most mv/v sensors and can store calibration data for up to50 non-smart torque sensors.

The 5VDC capability allows unit to be used with a brushless rotary torquesensor for testing pulse tools and high RPM tools.

Features Go / No Go LEDs that illuminate when high or low setting isachieved.

Real time graph of torque vs. time using associated PC Windows software.

Stores a total of 5000 data points.

Torque and Angle data is displayed simultaneously when used with torqueand angle sensors, up to 8000 RPM for angle measurement.

Torque Sensor

RTSX-A

All BLRTSX models

BMX

MTX

SDX

RTSX

CABLE CHART

072000

072001

072002

072003

072004

072005

Item #

Accuracy 0.5% of reading from 20% to 100% of full scale.Accuracy 1% of reading from 10% to 20% of full scale.

Provides EZ-Plug & Play with Mountz torque sensors. Features ARCIItechnology, an instant auto-recognition system of the sensors connected tothe LTT.

Flash memory allows upgrades to be done by the user in the field &internet through the USB port.

Item #

072998

072997

ACCESSORIESOPTIONAL

Multiplexer

Bar Code Reader

Description

Mounting Bracket(for LTT model 10i-50F)

072608

Mounting Bracket(for all LTT models)

072606

ACCESSORIESINCLUDED

USB Cable

Run Down Adapter

Mountz Software Progams

Battery Pack

Description

770301

770319

See Pg. 01.16

-

072506

Item #

Universal Charger(100-240VAC)

800.456.1828

PLUG & PLAYSupplied with Free ISO 17025Certification of Calibration.

CERTIFIED

EZ-TorQ IITorque Analyzer

TorqueAnalyzers

SPRING RUN DOWNADAPTERS

Provides consistent andreliable torque readings foruse with power driven torquecontrol tools.

See Page 01.13

EZ-TorQ

01.2

Recommended for hand screwdrivers, most wrenches andpower tools (Not for use in testing Impact or Pulse type tools).

KEY FEATURES

EZ-TorQ II 10i

EZ-TorQ II 50i

EZ-TorQ II 100i

EZ-TorQ II 150i

Torque Ranges

11.3 - 113

56.5 - 565

113 - 1130

169.5 - 1695

cN.m

1 - 10

5 - 50

10 - 100

15 - 150

lbf.inModel

1.2 - 11.5

5.8 - 57.6

11.5 - 115

17.3 - 173

Item #

070800

070801

070802

070803

17mm Female/Hex*

17mm Female/Hex*

17mm Female/Hex*

17mm Female/Hex*

Drive Size

4.5 lbs.

4.5 lbs.

4.5 lbs.

4.5 lbs.

Weightkgf.cm

* Each model includes a 1/4" Female/Hex Sq. Drive Adapter and a Spring Run Down Adapter for testing power tools.

CALIBRATION TESTEQUIPMENT

Calibrated Dead Weight andlength are the official meansby which Analyzers aretraced to NIST, ISO etc.

See Page 01.12

NOTE!Since a tester cannot always duplicate actual jointcharacteristics, the torque reading displayed onthe EZ-TorQ may vary from the actual torque thata tool will apply to a joint. A run down adapterthat simulates a variety of different jointcharacteristics is provided with the EZ-TorQ.When critical assemblies are involved, the torqueoutput of the power tool being used should beverified on the actual assembly using a calibratedmeasuring torque tool.

600728-1*

600728-2*

600728-3*

600728-4*

600734-18*

600734-20*

Item #

SCREW RUN DOWN ADAPTERS

RDA

RDA

RDA

RDA

RDA

RDA

Model

2 - 56

4 - 40

6 - 32

8 - 32

5/16 - 18

1/4 - 20

American

M2x.4

M3x.5

M4x.7

M5x.8

-

-

Metric

5

5

5

5

5

5

Quantity

* Hardware Kit # 1 for these RDA units (includes Washer and Screws), Item # 061237.

See EZ-TorQ manual for a list of items that areincluded in the Hardware Kit.

ACCESSORIES OPTIONAL

Accuracy 0.5% of reading from 20% to 100%Accuracy 1% of reading from 10% to 20%

Dimensions: (L x W x H): 7 1/4" x 4 1/3" x 2"

Selection of three operating modes:Track, Peak and First Peak


Features built-in Quick Test operation.

PC Windows based software program:Mountz EZ-TorQ II Interface Program - to conductQuick Tool Tests, Data Logging and Sensor Calibration.

Easy to use Menu Structure.

Six-digit display.

Ability to download readings to PC via RS-232 or via USB.

Real time output via RS-232.

High Capacity Li-Ion Batteries for long life.

The unit will store a total of up to 150 data points.

Real time graph of torque vs. time using associated PCWindows software.

Features Go / No Go LEDs that illuminate when high or lowtolerance setting is achieved or out of tolerance.

Three low-pass filter settings: 130, 150 and 500 Hz.

Includes a Spring Run Down Adapter.

Includes a case, Universal Charger, 1/4 F/Hex Sq. Dr. Adapter,USB Adapter & RS232 Cable Adapter.

Flash memory allows upgrades to be done by the user inthe field & internet through the RS-232 port.

Item #

ACCESSORIES INCLUDED

770301

600729

603107

14-501830

773064

773069

Universal Charger (For EZ-TorQ II)

Case (Pictured Above)

Battery Pack (For EZ-TorQ II)

Brush Cap

RS-232 Cable

Serial to USB Adapter

Description

1/4 F/Hex Sq. Dr. Adapter(17mm F/Hex)

600727

120143 Square Dr. Adapter(1/4 Sq. Dr x 1/4 Hex x 2" OAL)

Mountz MC14 catalog Copyright 2018 all rights reserved

Supplied with Free ISO 17025Certification of Calibration.

CERTIFIED

01.3

TorqueAnalyzers

Multiplexer

Bar Code Reader

ACCESSORIES OPTIONALDescription

072998

072997

Item #

PTT-2000 Item #072999

PTT

Tool Tests & GraphingThe PTT allows you to set up and create tool tests andsave the readings so you can export the data to a PC fordocumentation. It is the ideal solution for organizing andstoring test data for ISO and SPC documentation.

The ability to graph a dynamic rundown allows jointanalysis. Great resource to evaluate, create or confirm atorque specification or tool being used in production.

RTSX-A

All BLRTSX Models

BMX

MTX

SDX

RTSX

CABLE CHARTTorque Sensor

072000

072001

072002

072003

072004

072005

Item #

Universal Charger (100-240VAC)

USB Cable

Mountz Software Progams

Case

Battery Pack

ACCESSORIES INCLUDEDDescription

770301

770319

-

072509

072506

Item #


Features Go / No Go LEDs that illuminate when high or low setting isachieved.

Provides EZ-Plug & Play with Mountz torque sensors. Features ARCIItechnology, an instant auto-recognition system of the sensor connected to thePTT.

PTT SeriesTorque, Angle & Force Analyzer with ARCII Technology

TorqueMate

NOTE!Since a tester cannot always duplicate actual joint characteristics,the torque reading displayed on the PTT may vary from theactual torque that a tool will apply to a joint. When criticalassemblies are involved, the torque output of the power toolbeing used should be verified on the actual assembly using acalibrated measuring torque tool.

Operates with Torque & Force sensors.

Recommended for all hand screwdrivers, wrenches or power tools.

Two units of force measurement: lbf and kN

Features built-in Tool Tests operation.

Three PC Windows based software programs: Mountz Torque Meter Interface Program for sensor calibrations, meter calibration, and tool tests. Torque Meter Bootloader for updating the PTT operating systems. Excel Add-In for Real-Time data collection into an Excel spreadsheet. It provides statistic calculations.

Five low-pass filters: 3000, 2000, 1500, 500, and 200Hz

Six-digit display and easy to read menu structure.

Real Time Clock for time stamping of readings.

USB interface to download readings to PC.

High Capacity Li-ion Batteries for long life (30 hours with standardtorque sensors and 16 hours with brushless rotary sensors).

Can connect to most mv/v sensors and can store calibration data forup to 50 non-smart torque sensors.

The 5VDC capability allows unit to be used with a brushless rotarysensors for testing pulse tools and high RPM tools.

Real time graph of torque vs. time using associated PC Windows software.

Stores a total of 5000 data points.

Torque and Angle data is displayed simultaneously when used with torqueand angle sensors, up to 8000 RPM for angle measurement.

KEY FEATURESSystem Accuracy 0.5% of reading from 20% to 100% of full scale.System Accuracy 1% of reading from 10% to 20% of full scale.

Flash memory allows upgrades to be done by the user in the field& internet through the USB port.

Selection of six operation modes:Track, Peak, First Peak, Audit, Spindle Audit, Torque + Angle.

800.456.1828

PLUG & PLAY

ValidatorTorque Wrench Tester

Validator

01.4

KEY FEATURES

Designed for testing and calibrating torque wrenches.

Perform daily or weekly verification tests to confirmwrenches are operating at proper torque setting.

Accuracy 1% of reading from 20% to 100% of full scale.

Mountz MC14 catalog Copyright 2018 all rights reserved

Features Go / No Go LED that illuminates when highor low tolerance setting is achieved or out of tolerance.

Clockwise direction only.

Selection of three operation modes: Peak, First Peak & Track

Three units of torque measurements: (lbf.ft, N.m, kgf.m).

Includes 9V Li-ion rechargeable battery anduniversal charger (100-240 VAC).

Easy-to-use menu structure.

LCD display.

Small and lightweight.

Built-in mounting plate provides flexibility for mounting options.Suitable to be placed within the assembly line area. 54.4 - 272 N.m40 - 200 lbf.ftValidator 070532

Item # S.I.AmericanModelTorque Ranges

1/2" F/Sq

Drive Size Weight

2.2 lbs.5.5 - 27.6 kgf.m

Metric

Supplied with Free ISO 17025Certification of Calibration

CERTIFIED

NOTE!Do not use with electric or pnuematic tools.

Accessories

MTX

01.5

MTXLow Torque Reaction Sensor with ARC II Technology

KEY FEATURES

0.7 - 7.1 cN.m

1.5 - 14 cN.m

2.9 - 28.2 cN.m

5.7 - 56.5 cN.m

11.3 - 113 cN.m

1 - 10 ozf.in

2 - 20 ozf.in

4 - 40 ozf.in

8 - 80 ozf.in

16 - 160 ozf.in

MTX10z

MTX20z

MTX40z

MTX80z

MTX160z

079007

079008

079009

079010

079011


Torque Sensors

1/4 Female Square

1/4 Female Square

1/4 Female Square

1/4 Female Square

1/4 Female Square

MTX10z

MTX20z

MTX40z

MTX80z

MTX160z

DRIVE SIZE & DIMENSIONSinches

1.6

1.6

1.6

1.6

1.6

WidthLength

2.55

2.55

2.55

2.55

2.55

For calibrating low torque hand screwdrivers,wrenches, and power tools.

1/4" female square drive.

Bi-directional.

Various models that range from 1-160 ozf.in.

Mountable.

The low profile design makes it ideal forcalibrating robotic drivers on the assembly line.

SPECIFICATIONS

Drive Size

RUN DOWN ADAPTERSProvides consistent and reliabletorque readings for use withpower driven torque control tools.

See Page 01.13

Model

Always use a run down adapterwhen testing power tools.

WARNING!

MTX CABLE

For connecting toFTA-100, PTT or LTT

Item #072003

5

32

1

4 6

CONNECTION1 = Signal (+)

2 = Signal (-)

3 = Excitation (-)

4 = Excitation (+)

5 = Ground

6 = Data

MOUNTINGBRACKET

Model: MB-1Dimensions:4" x 3" x 4"

Item #062109

Rated Output: 2mv/v Nominal

Safe Overload: 125% of Rated Output

Bridge Resistance: 350 Ohms Nominal

Nonlinearity: 0.1% of Rated Output

Accuracy 0.25% of full scale.*

Features ARCII technology, an instant auto-recognitionsystem of the MTX connected to the PTT or LTT.

Width

0.172 THRU2X

.25

.25

.57

Length

1.27

LTT

See Page 01.1

Offers EZ-Plug & Play withinstant auto recognition withMountz ARCII torque sensors.

1

1

1

1

1

Height

800.456.1828

PLUG & PLAY

Supplied with Free ISO 17025 Certificationof Calibration.

CERTIFIED

NOTE!*This is the stand alone accuracy for the torque sensor. When the torque sensor is coupled with a Mountz torque analyzer, there is a system accuracy. Review the system accuracy listed with each torque analyzer.

Torque Sensors

077000

077001

077002

077003

077004

077005

077006

077007

077008

077009

077010

077011

077012

077013

077014

077015

077016

077017

077018

BMX

01.6

BMXTorque Reaction Sensor with ARCII Technology

BMX20z

BMX40z

BMX80z

BMX10i

BMX25i

BMX50i

BMX100i

BMX250i

BMX500i

BMX750i

BMX50F

BMX100F

BMX250F

BMX500F

BMX1000F

BMX2500F

BMX5000F

BMX10000F

BMX20000F

1.5 - 14 cN.m

2.9 - 28.2 cN.m

5.7 - 56.5 cN.m

11.3 - 113 cN.m

28 - 282.5 cN.m

56.5 - 565 cN.m

113 - 1130 cN.m

282.5 - 2825 cN.m

565 - 5650 cN.m

847 - 8473 cN.m

6.8 - 67.8 N.m

13.6 - 135.6 N.m

33.9 - 339 N.m

67.8 - 678 N.m

135.6 - 1355 N.m

339 - 3389 N.m

678 - 6779 N.m

1335 - 13558 N.m

2711 - 27116 N.m

Torque RangesItem # S.I.

2 - 20 ozf.in

4 - 40 ozf.in

8 - 80 ozf.in

1 - 10 lbf.in

2.5 - 25 lbf.in

5 - 50 lbf.in

10 - 100 lbf.in

25 - 250 lbf.in

50 - 500 lbf.in

75 - 750 lbf.in

5 - 50 lbf.ft

10 - 100 lbf.ft

25 - 250 lbf.ft

50 - 500 lbf.ft

100 - 1000 lbf.ft

250 - 2500 lbf.ft

500 - 5000 lbf.ft

1000 - 10000 lbf.ft

2000 - 20000 lbf.ft

AmericanModel

2.75

2.75

2.75

2.75

2.75

2.75

2.75

2.75

2.75

2.75

2.75

4

4

4

4

6

6

10.5

10.5

A

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

3/8

3/8

3/8

1/2

1/2

3/4

1

1 1/2

1 1/2

2 1/2

2 1/2

DriveSize

BMX20z

BMX40z

BMX80z

BMX10i

BMX25i

BMX50i

BMX100i

BMX250i

BMX500i

BMX750i

BMX50F

BMX100F

BMX250F

BMX500F

BMX1000F

BMX2500F

BMX5000F

BMX10000F

BMX20000F

B

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.75

2.75

3

3.75

4.65

4.65

10.5

10.5

C

1.7

1.7

1.7

1.7

1.7

1.7

1.7

1.7

1.7

1.75

1.75

2.25

2.25

2.4

2.38

3.88

3.88

6.5

6.5

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.413

0.413

0.413

0.406

0.531

0.531

0.781*

0.781*

D

2.175

2.175

2.175

2.175

2.175

2.175

2.175

2.175

2.175

2.175

2.175

3

3

3

3

4.75

4.75

8.875

8.875

E

DIMENSIONSinches

Model

Rated Output: 2mv/v Nominal


SPECIFICATIONSBridge Resistance: 350 Ohms Nominal

Nonlinearity: 0.1% of Rated Output

For calibrating hand screwdrivers, wrenches,and power tools.

Female square drive.

Bi-directional.

KEY FEATURES

Various models that range from 2 ozf.in to 20000 lbf.ft.

Mountable.

BMX CABLES

For connectingto FTA-100,LTT or PTT

Item #072002

A

CD

E

B F

A = Excitation (+)

B = Excitation (-)

C = Signal (-)

D = Signal (+)

E = N/A

F = N/A

CONNECTION

Connect With A:

LTT

See Page 01.1

MOUNTING BRACKETSee Page 01.14

Accuracy 0.25% of full scale*Accuracy 0.5% of full scale (BMX10000F, 20000F)*

Features ARCII technology, an instant auto-recognitionsystem of the BMX connected to the LTT and PTT.

Offers EZ-Plug & Play withinstant auto recognition withMountz ARCII transducers.

*Models have 8 mounting holes.

NOTE!*This is the stand alone accuracy for the torque sensor.When the sensor is coupled with a Mountz torqueanalyzer, there is a system accuracy. Review the systemaccuracy listed with each torque analyzer.

PLUG & PLAYDrive Size F/Square

C

B

A

D (Mounting Holes)

E (Dia.)Always use a run down adapter when testing power tools.

Not recommended for impact wrenches.

WARNING!

Supplied with Free ISO 17025 Certification of Calibration.

CERTIFIED

RTSX

01.7

RTSXRotary Torque Sensor with ARCII Technology

Torque Sensors

11.3 - 113 cN.m

11.3 - 113 cN.m

56.5 - 565 cN.m

56.5 - 565 cN.m

113 - 1130 cN.m

113 - 1130 cN.m

226 - 2260 cN.m

226 - 2260 cN.m

6.8 - 67.8 N.m

13.6 - 135.6 N.m

54.2 - 542.4 N.m

100 - 1000 N.m

203.3 - 2033 N.m

1 - 10 lbf.in

1 - 10 lbf.in

5 - 50 lbf.in

5 - 50 lbf.in

10 - 100 lbf.in

10 - 100 lbf.in

20 - 200 lbf.in

20 - 200 lbf.in

5 - 50 lbf.ft

10 - 100 lbf.ft

40 - 400 lbf.ft

74 - 738 lbf.ft

150 - 1500 lbf.ft

RTSX10i-H

RTSX10i

RTSX50i-H

RTSX50i

RTSX100i-H

RTSX100i

RTSX200i-H

RTSX200i

RTSX50F

RTSX100F

RTSX400F

RTSX738F

RTSX1500F

170200

170201

170202

170203

170204

170205

170206

170207

170208

170209

170210

170211

170212


RTSX10i-H

RTSX10i

RTSX50i-H

RTSX50i

RTSX100i-H

RTSX100i

RTSX200i-H

RTSX200i

RTSX50F

RTSX100F

RTSX400F

RTSX738F

RTSX1500F

1/4 Male/Hex

1/4 Female/Square

1/4 Male/Hex

1/4 Female/Square

1/4 Male/Hex

1/4 Female/Square

1/4 Male/Hex

3/8 Female/Square

3/8 Female/Square

1/2 Female/Square

3/4 Female/Square

1 Female/Square

1 1/2 Female/Square

Input

1/4 Female/Hex

1/4 Male/Square

1/4 Female/Hex

1/4 Male/Square

1/4 Female/Hex

1/4 Male/Square

1/4 Female/Hex

3/8 Male/Square

3/8 Male/Square

1/2 Male/Square

3/4 Male/Square

1 Male/Square

1 1/2 Male Square

Output

DRIVE SIZEinches

RTSX10i-H

RTSX10i

RTSX50i-H

RTSX50i

RTSX100i-H

RTSX100i

RTSX200i-H

RTSX200i

RTSX50F

RTSX100F

RTSX400F

RTSX738F

RTSX1500F

DIMENSIONS

101

75

101

75

101

75

101

74.5

74.5

79

97

112

165

A

58

58

58

58

58

58

58

44

44

44

50

57

87

D

28

8.5

28

8.5

28

8.5

28

18

18

22.5

30

34.5

44

EB

28

28

28

28

28

28

28

38

38

38

58

73

110

C

52

52

52

52

52

52

52

58

58

58

76

90

126

mm

SPECIFICATIONS

Model

Model

800.456.1828

Output at Rated Capacity: </= 6 Nm[53 lbf.in] rated torque 1 mV/V > 6 Nm[53 lbf.in] rated torque 2 mV/V

Interchangeability: Matched for mv/v and shunt calibration + 0.3% FS

Nonlinearity: + 0.2% FS

Excitation Recommended: 10V DC or AC RMS

Bridge Resistance: 350 Ohms

Usable Temperature Range: 41 - 122 F

Mating Connector: Bendix PT06A-10-65 (SR)


Accuracy 0.25% of full scale*.

Use with most hand tools, power tools, or rotationalmeasurement applications.

Connects between the power tool and the joint.Monitors actual torque being applied from the driverto the fastener.

Bi-directional.

KEY FEATURES

Connector

Connector

i & FModels

DA

E B

C

i-HModels

DA

EB

C

A

ED

C

F B

R

BLK

GR

W

RTSX CABLES

For connectingto FTA-100,PTT or LTT

Item #072005

Item #072000For connectingFTA-100, PTT orLTT to RTSX1500F

CONNECTIONA = Excitation (+)

B = Excitation (-)

C = Output (-)

D = Output (+)

E = Shield

F = 100% control (full scale)

Features ARCII technology, an instant auto-recognition system of the RTSX connected to theFTA-100, PTT or LTT.

NOTE!*This is the stand aloneaccuracy for the torque sensor.When the sensor is coupled witha Mountz torque analyzer, thereis a system accuracy. Review thesystem accuracy listed with eachtorque analyzer.

PLUG & PLAY


CERTIFIED

Not recommended for impactwrenches.

WARNING!

Rotary Torque & Angle Sensor with ARCII Technology

RTSX-A

RTSX-A

01.08

Torque Sensors

RTSX10i-HA

RTSX10i-A

RTSX50i-HA

RTSX50i-A

RTSX100i-HA

RTSX100i-A

RTSX200i-HA

RTSX200i-A

RTSX50F-A

RTSX100F-A

RTSX400F-A

RTSX800F-A

RTSX1500F-A

11.3 - 113 cN.m

11.3 - 113 cN.m

56.5 - 565 cN.m

56.5 - 565 cN.m

113 - 1130 cN.m

113 - 1130 cN.m

226 - 2260 cN.m

226 - 2260 cN.m

6.8 - 67.8 N.m

13.6 - 135.6 N.m

54.2 - 542.4 N.m

108.4 - 1084 N.m

203.3 - 2033N.m

1 - 10 lbf.in

1 - 10 lbf.in

5 - 50 lbf.in

5 - 50 lbf.in

10 -100 lbf.in

10 - 100 lbf.in

20 - 200 lbf.in

20 - 200 lbf.in

5 - 50 lbf.ft

10 - 100 lbf.ft

40 - 400 lbf.ft

80 - 800 lbf.ft

150 - 1500 lbf.ft

Torque RangesItem # S.I.AmericanModel

170213

170214

170215

170216

170217

170218

170219

170220

170221

170222

170223

170224

170282Ability to measure the rotation angle of a fastener.Joint rate and breakaway torque can be measured too.

Bi-directional.

KEY FEATURES

Angle Output: 2 channel quadrature, 360 pulses per rotation.

For use with most power tools or rotational measurementapplications.

DRIVE SIZEinches

SPECIFICATIONS

1/4 Male/Hex

1/4 Female/Square

1/4 Male/Hex

1/4 Female/Square

1/4 Male/Hex

1/4 Female/Square

1/4 Male/Hex

1/4 Female/Square

3/8 Female/Square

1/2 Female/Square

3/4 Female/Square

1 Female/Square

1 1/2 Female/Square

1/4 Female/Hex

1/4 Male/Square

1/4 Female/Hex

1/4 Male/Square

1/4 Female/Hex

1/4 Male/Square

1/4 Female/Hex

1/4 Male/Square

3/8 Male/Square

1/2 Male/Square

3/4 Male/Square

1 Male/Square

1 1/2 Male/Square

RTSX10i-HA

RTSX10i-A

RTSX50i-HA

RTSX50i-A

RTSX100i-HA

RTSX100i-A

RTSX200i-HA

RTSX200i-A

RTSX50F-A

RTSX100F-A

RTSX400F-A

RTSX800F-A

RTSX1500F-A

Input OutputModel

Connector

i-A, F-AModels

DA

E B

C


WARNING! Connector

i-HAModels

DA

EB

C

DIMENSIONSmm

101

75

101

75

101

75

101

75

101

106

135

177

165

A

28

8.5

28

8.5

28

8.5

28

8.5

21.5

26

40

57.5

39

E

RTSX10i-HA

RTSX10i-A

RTSX50i-HA

RTSX50i-A

RTSX100i-HA

RTSX100i-A

RTSX200i-HA

RTSX200i-A

RTSX50F-A

RTSX100F-A

RTSX400F-A

RTSX800F-A

RTSX1500F-A

B

28

28

28

28

28

28

28

28

38

38

58

73

110

C

52

52

52

52

52

52

52

52

58

58

76

90

126

58

58

58

58

58

58

58

58

59

59

64

73

87

DModel

RTSX-A CABLE

For connecting toPTT or LTT

Item #072000

Torque OutputA = Bridge Voltage (+)

B = Bridge Voltage (-)

C = Measured Signal (+)

D = Measured Signal (-)

E = Ground (Angle Voltage)

F = +5V (Angle Voltage)

Angle OutputG = Channel A (Load)

H = Channel B (Lag)

I = N/A

K = 100% Control (Full Scale)

CONNECTION

E

H

G

A

F

B

C

D

KI

Connect With A:

PTTAbility to document andsave torque readings.Ideal for SPC testing andISO testing.See Page 01.3


Features ARCII technology, an instant auto-recognitionsystem of the RTSX-A connected to the PTT or LTT.

Output at Rated Capacity: </= 6 Nm[53 lbf.in] rated torque 1 mV/V > 6 Nm[53 lbf.in] rated torque 2 mV/V

Interchangeability: Matched for mv/v and Shunt Calibration + 0.3% FS

Nonlinearity: + 0.2% FS

Excitation Recommended: 12V DC or AC RMS

Bridge Resistance: 350 Ohms

Usable Temperature Range: 41 - 122 F

Mating Connector: Bendix PT06A-12



PLUG & PLAY


CERTIFIED

BLRTSX-A

01.09

BLRTSX-ABrushless Rotary Torque & Angle Sensor with ARCII Technology

Torque Sensors

Non-contact signal transfer and maintenance free.

The common brush bounce that plagues the accuracytesting of pulse tools is cured when using a brushlessrotary transducer.

Compact design & bi-directional.

KEY FEATURES

For use with most power tools, high RPM tools, orrotational measurement applications.

7 - 20 cN.m

7 - 49 cN.m

18 - 98.8 cN.m

22.5 - 203 cN.m

56.5 - 565 cN.m

113 - 1130 cN.m

113 - 1130 cN.m

180 - 1807 cN.m

180 - 1807 cN.m

5 - 50 N.m

10 - 100 N.m

16 - 160 N.m

25 - 250 N.m

50 - 500 N.m

100 - 1000 N.m

10 - 28 ozf.in

10 - 70 ozf.in

25 - 140 ozf.in

2 - 18 lbf.in

5 - 50 lbf.in

10 - 100 lbf.in

10 - 100 lbf.in

16 - 160 lbf.in

16 - 160 lbf.in

4 - 36 lbf.ft

8 - 73 lbf.ft

12 - 118 lbf.ft

19 - 184 lbf.ft

37 - 368 lbf.ft

74 - 738 lbf.ft

BLRTSX28z-HA

BLRTSX70z-HA

BLRTSX140z-HA

BLRTSX18i-HA

BLRTSX50i-HA

BLRTSX100i-HA

BLRTSX100i-A

BLRTSX160i-HA

BLRTSX160i-A

BLRTSX36F-A

BLRTSX73F-A

BLRTSX118F-A

BLRTSX184F-A

BLRTSX368F-A

BLRTSX738F-A

170283

170246

170247

170248

170249

170250

170251

170252

170253

170254

170255

170256

170257

170258

170259


101

101

101

101

101

101

75

101

75

101

106

106

135

135

177

A

58

58

58

58

58

58

58

58

58

59

59

59

64

64

73

D

28

28

28

28

28

28

8.5

28

8.5

21.5

26

26

40

40

57.5

EB C

52

52

52

52

52

52

52

52

52

58

58

58

76

76

90

1/4 M/Hex

1/4 M/Hex

1/4 M/Hex

1/4 M/Hex

1/4 M/Hex

1/4 M/Hex

1/4 F/Sq

1/4 M/Hex

1/4 F/Sq

3/8 F/Sq

1/2 F/Sq

1/2 F/Sq

3/4 F/Sq

3/4 F/Sq

1 F/Sq

1/4 F/Hex

1/4 F/Hex

1/4 F/Hex

1/4 F/Hex

1/4 F/Hex

1/4 F/Hex

1/4 M/Sq

1/4 F/Hex

1/4 M/Sq

3/8 M/Sq

1/2 M/Sq

1/2 M/Sq

3/4 M/Sq

3/4 M/Sq

1 M/Sq

BLRTSX28z-HA

BLRTSX70z-HA

BLRTSX140z-HA

BLRTSX18i-HA

BLRTSX50i-HA

BLRTSX100i-HA

BLRTSX100i-A

BLRTSX160i-HA

BLRTSX160i-A

BLRTSX36F-A

BLRTSX73F-A

BLRTSX118F-A

BLRTSX184F-A

BLRTSX368F-A

BLRTSX738F-A

Input Output

Connector

i-A & FA Models z-HA, i-HA Models

DA

EDA

E B

C

Model

Angle Output: 2-channel quadrature, 360 pulses perrotation.

Ability to measure the rotation angle of a fastener.Joint rate & breakaway torque can be measured too.

Drive Size (inches) Dimensions (mm)

28

28

28

28

28

28

28

28

28

38

38

38

58

58

73


Features ARCII technology, an instant auto-recognitionsystem of the BLRTSX-A connected to the PTT or LTT.

Rated Output: 5VDC 0.2% FS

Excitation Recommended: 11VDC to 26VDC (pole secure)

Nonlinearity: 0.2% FS

Usable Temperature Range 41 to 122 F

Mating Connector: Tuchel Series 581 (98-2030-09-12)


SPECIFICATIONS

BLRTSX-A CABLEFor connecting toPTT or LTT.

Item #072001

CONNECTION

A

E

D

C

F

B

GM

H

JL

K

A = Ground (Shunt Calibration)

B = Angle 1 Speed

C = Torque Output

D = Ground (Torque Output)

E = Ground (Supply)

F = Supply, 11-26 VDC, 1 W

G = Angle 2

(90 running after Angle 1)

H = +5V (Angle Voltage)

K = Shunt Calibration

M = Shield

J & L = N/A

Threads for mounting M4, 6mm depth.

NOTE!*This is the stand alone accuracy for thetorque sensor. When the sensor is coupledwith a Mountz torque analyzer, there is asystem accuracy. Review the system accuracylisted with each torque analyzer.


WARNING!

800.456.1828

PLUG & PLAY

Supplied with Free ISO 17025 Certificationof Calibration.

CERTIFIED

BLRTSXBrushless Rotary Torque Sensor with ARC II Technology

BLRTSX

01.10

Torque Sensors

Non-contact signal transfer and maintenance free.

Bi-directional.

KEY FEATURES

Compact design.

For use with most power tools, high RPM tools, orrotational measurement applications.

BLRTSX28z-H

BLRTSX70z-H

BLRTSX140z-H

BLRTSX18i-H

BLRTSX50i-H

BLRTSX50i

BLRTSX100i-H

BLRTSX100i

BLRTSX160i-H

BLRTSX160i

BLRTSX18F

BLRTSX36F

BLRTSX73F

BLRTSX118F

BLRTSX184F

BLRTSX368F

BLRTSX738F

DIMENSIONS

101

101

101

101

101

75

101

75

101

75

74.5

74.5

79

79

97

97

112

A

58

58

58

58

58

58

58

58

58

58

44

44

44

44

50

50

57

D

28

28

28

28

28

8.5

28

8.5

28

8.5

18

18

22.5

22.5

30

30

34.5

EB

28

28

28

28

28

28

28

28

28

28

38

38

38

38

58

58

73

C

52

52

52

52

52

52

52

52

52

52

58

58

58

58

76

76

90

mm

Connectori & F Models z-H, i-H Models

DA

EDA

E B

C

Model


Features ARCII technology, an instant auto-recognitionsystem of the BLRTSX connected to the PTT or LTT.

The common brush bounce that plagues the accuracytesting of pulse tools is cured when using a BLRTSX.

BLRTSX CABLE

For connecting toPTT or LTT

Item #072001

CONNECTIONA = Ground

(Shunt Calibration)

C = Torque Output

D = Ground (Torque Output)

E = Ground (Supply)

F = Supply, 11-26 VDC, 1 W

K = Shunt Calibration

M = Shield

B/G/H/J/L = N/A

A

E

D

C

F

B

GM

H

JL

K

7 - 20 cN.m

7 - 49 cN.m

18 - 98.8 cN.m

22.5 - 203 cN.m

56.5 - 565 cN.m

56.5 - 565 cN.m

113 - 1130 cN.m

113 - 1130 cN.m

180 - 1807 cN.m

180 - 1807 cN.m

2.5 - 25 N.m

5 - 50 N.m

10 - 100 N.m

16 - 160 N.m

25 - 250 N.m

50 - 500 N.m

100 - 1000 N.m

10 - 28 ozf.in

10 - 70 ozf.in

25 - 140 ozf.in

2 - 18 lbf.in

5 - 50 lbf.in

5 - 50 lbf.in

10 - 100 lbf.in

10 - 100 lbf.in

16 - 160 lbf.in

16 - 160 lbf.in

2 - 18 lbf.ft

4 - 36 lbf.ft

8 - 73 lbf.ft

12 - 118 lbf.ft

19 - 184 lbf.ft

37 - 368 lbf.ft

74 - 738 lbf.ft

BLRTSX28z-H

BLRTSX70z-H

BLRTSX140z-H

BLRTSX18i-H

BLRTSX50i-H

BLRTSX50i

BLRTSX100i-H

BLRTSX100i

BLRTSX160i-H

BLRTSX160i

BLRTSX18F

BLRTSX36F

BLRTSX73F

BLRTSX118F

BLRTSX184F

BLRTSX368F

BLRTSX738F

170225

170226

170227

170228

170229

170230

170231

170232

170233

170234

170235

170236

170237

170238

170239

170240

170241


1/4 Male/Hex

1/4 Male/Hex

1/4 Male/Hex

1/4 Male/Hex

1/4 Male/Hex

1/4 Female/Square

1/4 Male/Hex

1/4 Female/Square

1/4 Male/Hex

1/4 Female/Square

3/8 Female/Square

3/8 Female/Square

1/2 Female/Square

1/2 Female/Square

3/4 Female/Square

3/4 Female/Square

1 Female/Square

1/4 Female/Hex

1/4 Female/Hex

1/4 Female/Hex

1/4 Female/Hex

1/4 Female/Hex

1/4 Male/Square

1/4 Female/Hex

1/4 Male/Square

1/4 Female/Hex

1/4 Male/Square

3/8 Male/Square

3/8 Male/Square

1/2 Male/Square

1/2 Male/Square

3/4 Male/Square

3/4 Male/Square

1 Male/Square

BLRTSX28z-H

BLRTSX70z-H

BLRTSX140z-H

BLRTSX18i-H

BLRTSX50i-H

BLRTSX50i

BLRTSX100i-H

BLRTSX100i

BLRTSX160i-H

BLRTSX160i

BLRTSX18F

BLRTSX36F

BLRTSX73F

BLRTSX118F

BLRTSX184F

BLRTSX368F

BLRTSX738F

Input Output

DRIVE SIZEinches

Model

SPECIFICATIONSRated Output: 5VDC 0.2% FS

Excitation Recommended: 11VDC to 26VDC (pole secure)

Nonlinearity: 0.2% FS

Usable Temperature Range 41 - 122 F

Mating Connector: Tuchel Series 581 (98-2030-09-12)


NOTE!*This is the stand alone accuracy for the torque sensor. Whenthe sensor is coupled with a Mountz torque analyzer, there is asystem accuracy. Review the system accuracy listed with eachtorque analyzer.

Notrecommendedfor impactwrenches.

WARNING!

PLUG & PLAY


CERTIFIED

Torque Sensors SDXTorque Screwdriver Sensor with ARCII Technology

Torque sensor for auditing or tightening fasteners toa specified torque when mated with a torqueanalyzer.

Ergonomic rubber grip and stainless steelFemale/Hex bit holder.

KEY FEATURES - SDX

SDX &LoadingBench

01.11

SDX10i

SDX50i

11.3 - 113 cN.m

56.5 - 565 cN.m

Torque RangesItem # S.I.

1 - 10 lbf.in

5 - 50 lbf.in

AmericanModel

078000

078001

SDX10i

SDX50i

Model Drive Size

1/4" Female/Hex

1/4" Female/Hex

Length

6"

6"

Width

1 1/2"

1 1/2"

Weight

0.5 lbs.

0.5 lbs.

Connect to a torque analyzer to monitor, test oraudit a fastener.

Safe Overload: 125% of Rated Output.

CABLE - SDX

For connecting to PTT or LTTItem #072004

A = Signal (+)

B = Signal (-)

C = Excitation (-)

D = Excitation (+)

E/F = N/A

SDX CONNECTION

A

CD

E B

F

Connect With A:

LTTConnect to a torque analyzer tomonitor, test or audit a fastener.

See Page 01.3


Features ARCII technology, an instant auto-recognition system of the SDX connected to thePTT or LTT.


LB250F

NOTE!It is recommended that the Loading Bench be fastened to a bench top.

Calibration Equipment Loading BenchCalibrating Wrenches

A calibration system designed to ensureaccurate calibration of torque wrenches.

The laboratory grade instrument assuresaccurate torque calibration and pre-setting, independent of human influenceor transducer side and end load factors.

KEY FEATURES

Built for durable use, the Loading Benchreduces the operator effort required toattain and sustain torque during thecalibration process.

Models that range from 0 - 2000 lbf.ft

Large wheel for smooth manual loading.

Operates in both clockwise andcounterclockwise directions.

The drive system assures the loadapplication, eliminating the operatorinduced test error.

Use with a Mountz BMX torque sensorand torque analyzer.

Mountable for bench or a cabinet.

Adjustable to fit the size of wrench beingtested. Load applied easily and slowly foraccurate calibration.

Torque Range: Max. 250 lbf.ft (3000 lbf.in).

Horizontal Reaction Position:4" to 28" from the center of the turn-table.

Vertical Reaction Position:1" to 4" from the turn-table base.

Weight: 53 lbs.

Size: 37.5" W x 12" H x 10.75" D

Item #063302

LB750FTorque Range: Max. 750 lbf.ft (9000 lbf.in).

Horizontal Reaction Position:4.87" to 41.25" from the center of the turn-table.

Vertical Reaction Position:1.87" to 5.4" from the turn-table base.

Weight: 130 lbs.

Size: 50" W x 15" H x 15.5" D

Item #063301

LB2000FTorque Range: Max. 2000 lbf.ft (24000 lbf.in).

Horizontal Reaction Position:4.87" to 75.5" from the center of the turn-table.

Vertical Reaction Position:1.87" to 5.4" from the turn-table base.

Weight: 160 lbs.

Size: 84.75" W x 15" H x 15.5" D

Item #063300

800.456.1828

PLUG & PLAY


CERTIFIED

Calibration TestFor Torque Analyzers & Torque Sensors

Calibration Equipment

CalibrationTest Equipment

01.12

Step 2: Select Hanger

2 lbs.

5 lbs.

Stainless Steel (Class F)

Stainless Steel (Class F)

110044

110043

Item # WeightModel

9 1/4"

16"

Stem

Step 3: Select Weights

0.25 oz.

0.50 oz.

1 oz.

2 oz.

4 oz.

8 oz.

16 oz.

32 oz.

40 oz.

0.5 lbs.

1 lb.

2 lbs.

5 lbs.

10 lbs.

20 lbs.

50 lbs.

Stainless Steel Hook (Class 3)









Stainless Steel Slotted (Class F)







110050

110051

110052

110053

110054

110055

110056

110057

110058

110047

110046

110045

110041

110042

110070

110071

Item # WeightModel

Calibrated Dead Weights are the official means by whichtorque analyzers and transducers are traced to the Nationalor International Standards such as NIST, ISO, and others.There are 3 components that compose of a Dead WeightTest Set: (1) Segment Arm or Wheel, (2) Hanger, and(3) Weights.

25 lbs.

75 lbs.

100 lbs.

75 lbs.

100 lbs.

125 lbs.

250 lbs.

125 lbs.

250 lbs.

S-10

S-10

S-10

S-12

S-12

S-24

S-24

S-48

S-48

061106

060094

060056

060052

060093

060091

060053

060090

060054

Item # Max Wt.Model

.005

.005

.005

.006

.006

.012

.012

.024

.024

Tolerance

1/4"

3/8"

1/2"

3/8"

1/2"

1/2"

3/4"

3/4"

1"

Input Dr.

10"

10"

10"

12"

12"

24"

24"

48"

48"

Length

SEGMENT ARMS

Step 1:Select either:Segment Armor Wheel

50 oz.

20 lbs.

65 lbs.

1.0

2.0

4.0

069980

060095

060064

Item # Max Wt.Model

.001

.001

.002

Tolerance

1/4"

1/4" & 3/8"

1/4" & 3/8"

Input Dr.

1"

2"

4"

Radius

WHEELS (pictured upper right photo)

Hook Weight Slotted Weight Hanger

Equipment

TOTAL WEIGHTWeights are placed upon theHanger, which is hung from theSegment Arm or Wheel. Theamount of total weight needed isdetermined by the maximum torquerange of the analyzer or sensorbeing calibrated and the length ofthe Segment Arm or Wheel.

NOTE!Total weight includesboth the Hanger and theStainless SteelWeight(s).

Run Down AdaptersTorque Analyzers and Sensors

RDA

01.13

Accessories

Designed to provide consistent andreliable torque readings for use withpower driven torque control tools.

Adapter is mounted in-line betweentool drive and the torque sensor.

Hardened thread componentsincrease accuracy and life.

Non-rotating body for improved safety.

Square drives conform to ASMEB107 standards for proper fit.

Compact size and lightweight.

Operates in clockwise direction only.After each run down, the RDAshould be completely backed-up.

11.3 - 113 cN.m

28 - 282.5 cN.m

56.5 - 565 cN.m

113 - 1130 cN.m

282.5 - 2825 cN.m

847 - 8473 cN.m

6.8 - 67.8 N.m

13.6 - 135.6 N.m

33.9 - 339 N.m

67.8 - 678 N.m

135.6 - 1355 N.m

339 - 3389 N.m

678 - 6779 N.m

1 - 10 lbf.in

2 - 25 lbf.in

5 - 50 lbf.in

10 - 100 lbf.in

25 - 250 lbf.in

75 - 750 lbf.in

5 - 50 lbf.ft

10 - 100 lbf.ft

25 - 250 lbf.ft

50 - 500 lbf.ft

100 - 1000 lbf.ft

250 - 2500 lbf.ft

500 - 5000 lbf.ft

RDA-10i

RDA-25i

RDA-50i

RDA-100i

RDA-250i

RDA-750i

RDA-50F

RDA-100F

RDA-250F

RDA-500F

RDA-1000F

RDA-2500F

RDA-5000F

063970

063971

063972

063973

063974

063977

063978

063981

063982

063983

063991

063990

063992

Item # Sq. DriveAmericanModelTorque Ranges

1/4"1/4"1/4"1/4"1/4"3/8"3/8"1/2"1/2"3/4"1"11/2"11/2"

RUN DOWN ADAPTERS

S.I.

Ideal for testing and recording the results of power tools with atorque analyzer or sensor. Not recommended for pulse tools.

Operates in clockwise direction only. Once the tool shuts off, theAURA automatically unwinds for the next run down. Eliminates theneed to back it out.

Designed to provide consistent and reliable torque readings for usewith power driven torque control tools.

Adapter is mounted in-line between tool drive and the torque sensor.


Includes two springs to cover the torque range 1 - 50 lbf.in

25 - 50 lbf.in

25 - 50 lbf.in

1 - 25 lbf.in

1 - 25 lbf.in

AURA

AURA

063292

063293

Item # Heavy SpringLight SpringModelTorque Ranges

1/4" F/Sq.

1/4" F/Sq.

17mm Hex

1/4 M/Sq.

AURA ADAPTER(Auto Reversing Run Down Adapter)

DriveOutput

DriveInput

11.3 - 113

56.5 - 565

113 - 1130

169.5 - 1695

1 - 10

5 - 50

10 - 100

15 - 150

RDA

RDA

RDA

RDA

070600

070605

070610

070615

Item # lbf.inModelTorque Ranges

Gold

Yellow

Blue

Green

cN.mDriveInput

5mm Hex

6mm Hex

6mm Hex

6mm Hex

Designed to provide consistent and reliable torque readings foruse with power driven torque control tools.

Adapter is mounted in-line between tooldrive and a transducer.


SPRING RUN DOWN ADAPTERS for EZ-TorQ

Operates in clockwise direction only.

Compatible with only theEZ-TorQ Analyzer.

The mini RDA unit with fastener is designed for low torque sensors(BMX20z - BMX10i and MTX models).

Designed to provide consistent and reliable torque readings for usewith low torque power tools.

MINI RUN DOWN ADAPTERS

The mini RDAs allow a close simulation of actual joints.

Adapter is mounted in-line between tool drive and the torque sensor.

Operates in clockwise direction only.

The kit includes 5 mini RDA units along with 10 fasteners.

PH Phil 2-56 x 1/4 SS




Mini RDA2

Mini RDA4

Mini RDA6

Mini RDA10

061229-2

061229-4

061229-6

061229-10

Item # ScrewsModel

17mm Hex

17mm Hex

17mm Hex

17mm Hex

DriveOutput

SpringColor

800.456.1828

NOTE!Change screws when thread wear occurs.(Recommended - approximately every 25 run downs).

01.14Accessories

Accessories

Model: MB-1Works with:BMX20z - BMX500FMTX 10z - 160zAll EZ-TorQ ModelsDimensions: 4" x 3" x 4"Item #062109

Model: MB-3Works with:BMX1000F - BMX5000FDimensions: 8" x 7 7/8" x 8"Item #062128

A BMX torque sensor is securely mounted for calibrating atorque wrench using a Mounting Bracket. Keeping the sensorin a stable position ensures the accuracy of the torquemeasurement during operation.

Torque Analyzers and Torque Sensors

MOUNTINGBRACKETS

Connects 1-4 sensors to the Torque Analyzer andswitches between the sensors manually orautomatically.

Eliminates the need to plug and unplug sensors.

When the PTT or LTT is connected to theMultiplexer it reviews the Multiplexer (Mux) todetermine what sensors are connected anddownloads the identity and calibration data foreach of the attached sensors.

Size (W x L x H):6 3/4" x 6 3/4" x 1 3/8"Weight: 1.3 lbs. Item #072998

Designed to scan BarCodes on tools andstart Tool Testsautomatically.

Reduces operationaltime for users with alarge number of ToolTests stored in theanalyzer.

The PTT or LTT aredesigned to workwith this bar codereader.

Item #072997

BAR CODEREADERfor LTT and PTT

MULTIPLEXERfor LTT and PTT

11/16"7/16"3/8"7/32"17mm

12mm

8mm

7mm

6mm

5mm

3/4"1/2"1/2"1/4"19mm

13mm

9mm

9mm

8mm

5.5mm

American

American

American

American

Metric

Metric

Metric

Metric

Metric

Metric

061500

061501

061527

061502

061503

061504

061505

061529

061528

061506

Item # BAModelDimensions

CALIBRATIONHEX STEPADAPTERS

5/8"3/8”1/4"3/16"16mm

11mm

7mm

5mm

4mm

4.5mm

9/16"5/16"1/8"1/8"14mm

10mm

6mm

3mm

2mm

4mm

7/8"11/16"7/16"7/16"7/32"17mm

15mm

14mm

12mm

8mm

5mm

1"3/4"9/16"1/2"1/4"19mm

17mm

16mm

13mm

9mm

5.5mm

American

American

American

American

American

Metric

Metric

Metric

Metric

Metric

Metric

061537

061524

061531

061525

061530

061543

061542

061541

061540

061539

061538

Item #Model

3/4"5/8"5/16"3/8"3/16"16mm

13mm

12mm

11mm

7mm

4.5mm

5/8"9/16"3/16"5/16"1/8"14mm

11mm

10mm

10mm

6mm

4mm

3/8" Square Dr.

1/4" Square Dr.

C D

BADimensions

C D

CD

AB

Item #072608For LTT Model: 10i-50F

MOUNTING BRACKETSfor LTT Torque Analyzer

Item #072606For All LTT Models

Torque Measurement

CERTIFICATIONAll Mountz torque analyzers and sensors are supplied witha Free ISO 17025 Certification of Calibration.

Calibration ServicesMountz Inc. features an experienced calibration and repair staff. Our trained technicians can calibrate andrepair most any tool. Mountz provides rapid service with quality that you can trust as we offer two state-of-the-art calibration lab and repair facilities that can calibrate up to 20,000 lbf.ft. All calibrations areperformed using NIST-Traceable standards, and meet the requirements of ANSI/NCSL Z540.

Quality StandardsTo meet customer requirements, we begin with compliance to stringent, world-class quality standards.- Mountz is a quality certified and accredited company.- Design and testing of all hand tools conforms to requirements of ISO 6789, as specified.- Laboratory operations and calibrations meet the requirements of ANSI/NCSL Z540-1.

HeaderIdentifies name and location of laboratoryissuing certificate, as well as certificate number.

Equipment TestedEasy identification of tool type, maximum capacity,serial number, and accuracy. Also indicates arrivalcondition of tool, service performed, calibrationdate, interval, and due date.

Standards UsedIdentifies procedure and equipment used to performthe calibration, as well as test accuracy ratio.

CertificationSection for approval of certificate content by authorized signatories. Also includes statement ofcompliance with relevant calibration standards and NIST-Traceability.

This symbol identifies the products that aresupplied with a Free ISO 17025 Certificationof Calibration.

CERTIFICATE OF CALIBRATION

CALIBRATION INTERVALSA tool must be properly calibrated and maintained on a preventative maintenance and calibrationschedule. In order to maintain accuracy, it is crucial that a torque tool and measuring equipmentbe calibrated regularly. Some organizations may recommend six (6) month calibration intervals,while others may schedule it at twelve (12) months. However, it is the organization that ownsthe tool that must determine a suitable calibration frequency that meets their needs based uponmany factors, such as history of equipment performance, application, degree of usage, andmanagement objectives.

CERTIFICATION EXPLANATION

Torque tools go out of calibration with use. To maintain consistent accuracy, torque tools must be checkedperiodically for wear or defective parts. A power or hand torque tool is a measuring tool that must beproperly calibrated and maintained. Regular torque calibration and re-calibration guarantees repeatableaccuracy and adherence to international standards. Torque testing also ensures torque equipment isoperating to peak performance and can highlight potential tooling problems before they arise perhaps dueto tool wear or broken components.

TORQUE MEASUREMENT

A torque analyzer or a torque sensor are a finely tuned instrument designed for testing and monitoringtorque applications. Designed for torque evaluation and verification, a torque analyzer and sensor are alaboratory grade instruments commonly used for quality control, R&D and calibration applications. Theseinstruments can be used to calibrate or test hand screwdrivers, pneumatics screwdrivers, torque wrenches,electric screwdrivers, pulse tools, cordless screwdrivers, torque multipliers and other torque tools. Usinga quality torque tester or sensor are key for many companies to ensure that the proper torque is beingapplied. Testing torque is literally a science and not something that can be left to chance.

Controlling torque is essential for companies to ensure their product s quality, safety and reliability isn tcompromised. The failure of a three-cent fastener that isn t properly tightened can lead to catastrophicor latent failures. Fasteners that are insufficiently torqued can vibrate loose and excessive torque can stripthreaded fasteners. Torque measurement should occur in three facets of the assembly process: 1) Priorto Assembly 2) During Assembly 3) After Assembly.

and Calibration

CORPORATEHEADQUARTERS1080 North 11th StreetSan Jose CA 95112800.456.1828fax [email protected]

DISTRIBUTION &SERVICE CENTER19051 Underwood RoadFoley AL 36535251.943.4125fax 251.943.4979

US SALESSTAFF LOCATIONSAnaheim, Boston, Charlotte,Chicago, Cleveland, Dallas,El Paso, Los Angeles, Nashville,Phoenix, Seattle, San Jose

MEXICO SALESSTAFF LOCATIONSChihuahua, Guadalajara, Juarez,Monterrey, Reynosa, Saltillo,Tijuana, Queretaro

EUROPE SALESSTAFF LOCATIONThe Netherlands800.456.1828

mountz torque analyzer & test measurement catalog...1.2 - 11.5 kgf.cm 2.9 - 28.8 kgf.cm 5.8 -...

Documents