monofin 2015 - breier
TRANSCRIPT
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 600 mmSurface area of the pair of blades : 2700 cm2Flat blade for made-to-measure footpocket (free heel)Blade with an angle of 15° to fit in full footpocket3 kinds of varying hardness that are most likely to suit your style and body type : ME1EG : softME2EG : mediumME3EG : hardWeight with made-to-measure footpocket = 1,5kgWeight with full footpocket = 1,9kgU-shaped sections along the edge to ensure a good protection of the blade and the swimmer
DESCRIPTIONA very good monofin introduction for childs. A small blade to avoid strain.Made-to-measure footpocket starting at size 3
FOOTPOCKETS2 kinds of footpockets :- Made-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better stroke optional extra : velcro strap for instep fine tuning- Tuned full footpocket : cut out footpocket to get a lighter and more responsive swimfin. Imersion : 38-40, 40-42, 42-44, 44-46 Pathos : 36-38, 38-40, 40-42, 42-44, 44-46, 46-48, 48-50
ME1EG / ME2EG / ME3EG
TECHNOLOGYTechnology : prepreg curing processFabric : E-glass Resin : epoxyPerformance : 30 to 40% more responsive than plastic
DESCRIPTIONA very good monofin introduction for childs. A small blade to avoid strain.Made-to-measure footpocket starting at size 3Better strength and improved resistance to impact and crack propagation thanks to S Glass.
ME1SG / ME2SG / ME3SG
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 600 mmSurface area of the pair of blades : 2700 cm2Flat blade for made-to-measure footpocket (free heel)Blade with an angle of 15° to fit in full footpocket3 kinds of varying hardness that are most likely to suit your style and body type : ME1SG : softME2SG : mediumME3SG : hardWeight with made-to-measure footpocket = 1,5kgWeight with full footpocket = 1,9kgU-shaped sections along the edge to ensure a good protection of the blade and the swimmer
FOOTPOCKETS2 kinds of footpockets :- Made-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better stroke optional extra : velcro strap for instep fine tuning- Tuned full footpocket : cut out footpocket to get a lighter and more responsive swimfin. Imersion : 38-40, 40-42, 42-44, 44-46 Pathos : 36-38, 38-40, 40-42, 42-44, 44-46, 46-48, 48-50
TECHNOLOGYTechnology : prepregFabric : S-glass fibre Resin : epoxyPerformance : 4 to 5% more responsive than E-glassElastic limit : 10 to 15 % more strength than E-glass
DESCRIPTIONMonofin for juniors.Blade with a medium surface areaMade-to-measure footpocket or full footpocket.
MJ1EG / MJ2EG / MJ3EG
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 665 mmSurface area of the pair of blades : 3090 cm2Flat blade for made-to-measure footpocket (free heel)Blade with an angle of 15° to fit in full footpocket3 kinds of varying hardness that are most likely to suit your style and body type : MJ1EG : softMJ2EG : mediumMJ3EG : hardWeight with made-to-measure footpocket = 1,5kgWeight with full footpocket = 1,9kgU-shaped sections along the edge to ensure a good protection of the blade and the swimmer
FOOTPOCKETS2 kinds of footpockets :- Made-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better stroke optional extra : velcro strap for instep fine tuning- Tuned full footpocket : cut out footpocket to get a lighter and more responsive swimfin. Imersion : 38-40, 40-42, 42-44, 44-46 Pathos : 36-38, 38-40, 40-42, 42-44, 44-46, 46-48, 48-50
TECHNOLOGYTechnology : prepreg curing processFabric : E-glass Resin : epoxyPerformance : 30 to 40% more responsive than plastic
DESCRIPTIONMonofin for juniors.Blade with a medium surface areaMade-to-measure footpocket or full footpocket.Better strength and improved resistance to impact and crack propagation thanks to S Glass.
MJ1SG / MJ2SG / MJ3SG
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 665 mmSurface area of the pair of blades : 3090 cm2Flat blade for made-to-measure footpocket (free heel)Blade with an angle of 15° to fit in full footpocket3 kinds of varying hardness that are most likely to suit your style and body type : MJ1SG : softMJ2SG : mediumMJ3SG : hardWeight with made-to-measure footpocket = 1,5kgWeight with full footpocket = 1,9kgU-shaped sections along the edge to ensure a good protection of the blade and the swimmer
FOOTPOCKETS2 kinds of footpockets :- Made-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better stroke optional extra : velcro strap for instep fine tuning- Tuned full footpocket : cut out footpocket to get a lighter and more responsive swimfin. Imersion : 38-40, 40-42, 42-44, 44-46 Pathos : 36-38, 38-40, 40-42, 42-44, 44-46, 46-48, 48-50
TECHNOLOGYTechnology : prepregFabric : S-glass fibre Resin : epoxyPerformance : 4 to 5% more responsive than E-glassElastic limit : 10 to 15 % more strength than E-glass
DESCRIPTIONMonofin for juniors.Blade with a medium surface areaMade-to-measure footpocket or full footpocket.Very high thrust thanks to the mechanical properties of our high strength carbon.
MJ1C5 / MJ2C5 / MJ3C5
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 665 mmSurface area of the pair of blades : 3090 cm2Flat blade for made-to-measure footpocket (free heel)Blade with an angle of 15° to fit in full footpocket3 kinds of varying hardness that are most likely to suit your style and body type : MJ1C5 : softMJ2C5 : mediumMJ3C5 : hardWeight with made-to-measure footpocket = 1,5kgWeight with full footpocket = 1,9kgU-shaped sections along the edge to ensure a good protection of the blade and the swimmer
FOOTPOCKETS2 kinds of footpockets :- Made-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better stroke optional extra : velcro strap for instep fine tuning- Tuned full footpocket : cut out footpocket to get a lighter and more responsive swimfin. Imersion : 38-40, 40-42, 42-44, 44-46 Pathos : 36-38, 38-40, 40-42, 42-44, 44-46, 46-48, 48-50
TECHNOLOGYTechnology : prepregFabric : high-strength carbon fibre Resin : epoxyPerformance : 15 to 20% more responsive than E-glassElastic limit : identical strenght than E-glass
DESCRIPTIONMonofin for juniors.Blade with a medium surface areaMade-to-measure footpocket or full footpocket.Extraordinary thrust thanks to the mechanical properties of our intermediate modulus carbon.
MJ1C8 / MJ2C8 / MJ3C8
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 665 mmSurface area of the pair of blades : 3090 cm2Flat blade for made-to-measure footpocket (free heel)Blade with an angle of 15° to fit in full footpocket3 kinds of varying hardness that are most likely to suit your style and body type : MJ1C8 : softMJ2C8 : mediumMJ3C8 : hardWeight with made-to-measure footpocket = 1,5kgWeight with full footpocket = 1,9kgU-shaped sections along the edge to ensure a good protection of the blade and the swimmer
FOOTPOCKETS2 kinds of footpockets :- Made-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better stroke optional extra : velcro strap for instep fine tuning- Tuned full footpocket : cut out footpocket to get a lighter and more responsive swimfin. Imersion : 38-40, 40-42, 42-44, 44-46 Pathos : 36-38, 38-40, 40-42, 42-44, 44-46, 46-48, 48-50
TECHNOLOGYTechnology : prepregFabric : intermediate modulus carbon fibre Resin : epoxyPerformance : 5 to 6% more responsive than carbon C5Elastic limit : 4 to 5 % more strength than carbon C5
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 710 mmSurface area of the pair of blades : 3170 cm2Flat blade for made-to-measure footpocket (free heel)Blade with an angle of 15° to fit in full footpocket5 kinds of varying hardness that are most likely to suit your style and body type : M1EG : very soft, finswimming (10-20km), dynamic apnea, beginnerM2EG : soft, finswimming (5-10km), dynamic apnea and constant weightM3EG : medium, finswimming (400-1500m), constant weight apneaM4EG : hard, finswimming (200-400m), constant weight apneaM5EG : very hard, finswimming (50-200m), constant weightWeight with made-to-measure footpocket = 1,5kgWeight with full footpocket = 1,9kgU-shaped sections along the edge to ensure a good protection of the blade and the swimmer
DESCRIPTIONA multipurpose monofin compatible with freediving or finswimming according to the choice of hardness.Made-to-measure footpocket or full footpocket.
M1EG / M2Eg / M3EG / M4EG / M5EG
FOOTPOCKETS2 kinds of footpockets :- Made-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better stroke optional extra : velcro strap for instep fine tuning- Tuned full footpocket : cut out footpocket to get a lighter and more responsive swimfin. Imersion : 38-40, 40-42, 42-44, 44-46 Pathos : 36-38, 38-40, 40-42, 42-44, 44-46, 46-48, 48-50
TECHNOLOGYTechnology : prepreg curing processFabric : E-glass Resin : epoxyPerformance : 30 to 40% more responsive than plastic
DESCRIPTIONA multipurpose monofin compatible with freediving or finswimming according to the choice of hardness.Made-to-measure footpocket or full footpocket.Better strength and improved resistance to impact and crack propagation thanks to S Glass.
M1SG / M2Sg / M3SG / M4SG / M5SG
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 710 mmSurface area of the pair of blades : 3170 cm2Flat blade for made-to-measure footpocket (free heel)Blade with an angle of 15° to fit in full footpocket5 kinds of varying hardness that are most likely to suit your style and body type : M1SG : very soft, finswimming (10-20km), dynamic apnea, beginnerM2SG : soft, finswimming (5-10km), dynamic apnea and constant weightM3SG : medium, finswimming (400-1500m), constant weight apneaM4SG : hard, finswimming (200-400m), constant weight apneaM5SG : very hard, finswimming (50-200m), constant weightWeight with made-to-measure footpocket = 1,5kgWeight with full footpocket = 1,9kgU-shaped sections along the edge to ensure a good protection of the blade and the swimmer
FOOTPOCKETS2 kinds of footpockets :- Made-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better stroke optional extra : velcro strap for instep fine tuning- Tuned full footpocket : cut out footpocket to get a lighter and more responsive swimfin. Imersion : 38-40, 40-42, 42-44, 44-46 Pathos : 36-38, 38-40, 40-42, 42-44, 44-46, 46-48, 48-50
TECHNOLOGYTechnology : prepregFabric : S-glass fibre Resin : epoxyPerformance : 4 to 5% more responsive than E-glassElastic limit : 10 to 15 % more strength than E-glass
DESCRIPTIONA multipurpose monofin compatible with freediving or finswimming according to the choice of hardness.Made-to-measure footpocket or full footpocket.Very high thrust thanks to the mechanical properties of our high strength carbon.
M1C5 / M2C5 / M3C5 / M4C5 / M5C5
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 710 mmSurface area of the pair of blades : 3170 cm2Flat blade for made-to-measure footpocket (free heel)Blade with an angle of 15° to fit in full footpocket5 kinds of varying hardness that are most likely to suit your style and body type : M1C5 : very soft, finswimming (10-20km), dynamic apnea, beginnerM2C5 : soft, finswimming (5-10km), dynamic apnea and constant weightM3C5 : medium, finswimming (400-1500m), constant weight apneaM4C5 : hard, finswimming (200-400m), constant weight apneaM5C5 : very hard, finswimming (50-200m), constant weightWeight with made-to-measure footpocket = 1,5kgWeight with full footpocket = 1,9kgU-shaped sections along the edge to ensure a good protection of the blade and the swimmer
FOOTPOCKETS2 kinds of footpockets :- Made-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better stroke optional extra : velcro strap for instep fine tuning- Tuned full footpocket : cut out footpocket to get a lighter and more responsive swimfin. Imersion : 38-40, 40-42, 42-44, 44-46 Pathos : 36-38, 38-40, 40-42, 42-44, 44-46, 46-48, 48-50
TECHNOLOGYTechnology : prepregFabric : high-strength carbon fibre Resin : epoxyPerformance : 15 to 20% more responsive than E-glassElastic limit : identical strenght than E-glass
DESCRIPTIONA multipurpose monofin compatible with freediving or finswimming according to the choice of hardness.Made-to-measure footpocket or full footpocket.Extraordinary thrust thanks to the mechanical properties of our intermediate modulus carbon.
M1C8 / M2C8 / M3C8 / M4C8 / M5C8
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 710 mmSurface area of the pair of blades : 3170 cm2Flat blade for made-to-measure footpocket (free heel)Blade with an angle of 15° to fit in full footpocket5 kinds of varying hardness that are most likely to suit your style and body type : M1C8 : very soft, finswimming (10-20km), dynamic apnea, beginnerM2C8 : soft, finswimming (5-10km), dynamic apnea and constant weightM3C8 : medium, finswimming (400-1500m), constant weight apneaM4C8 : hard, finswimming (200-400m), constant weight apneaM5C8 : very hard, finswimming (50-200m), constant weightWeight with made-to-measure footpocket = 1,5kgWeight with full footpocket = 1,9kgU-shaped sections along the edge to ensure a good protection of the blade and the swimmer
FOOTPOCKETS2 kinds of footpockets :- Made-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better stroke optional extra : velcro strap for instep fine tuning- Tuned full footpocket : cut out footpocket to get a lighter and more responsive swimfin. Imersion : 38-40, 40-42, 42-44, 44-46 Pathos : 36-38, 38-40, 40-42, 42-44, 44-46, 46-48, 48-50
TECHNOLOGYTechnology : prepregFabric : intermediate modulus carbon fibre Resin : epoxyPerformance : 5 to 6% more responsive than carbon C5Elastic limit : 4 to 5 % more strength than carbon C5
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 715 mmSurface area of the pair of blades : 3190 cm2Flat blade with AST structure 3 kinds of varying hardness that are most likely to suit your style and body type : MW1EG : soft, finswimming (5-20km) and dynamic apneaMW2EG : medium, finswimming (5-10km), dynamic and constant apneaMW3EG : hard, finswimming (200-1500m), dynamic and constant weight apneaWings with NACA waterfoil for better hydrodynamic performanceWeight with made-to-measure footpocket : 3 kgNeutral buoyancy
TECHNOLOGYTechnology : prepreg curing processFabric : E-glass Resin : epoxyPerformance : 30 to 40% more responsive than plasticAST
DESCRIPTIONOur monofin with wings is the high end performance monofin with our latest evolution. It’s all about thrust and flow.E glass blade built with AST and wings with NACA waterfoil.Monofin with neutral buoyancy.
MW1EG / MW2EG / MW3EG
FOOTPOCKETSMade-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better strokeSole with 20° angle to align the blade with the legs and to relax ankle stressesFootpocket offset from the center of the blade to maximize the lever arm effect
DESCRIPTIONOur monofin with wings is the high end performance monofin with our latest evolution. It’s all about thrust and flow.E glass blade built with AST and wings with NACA waterfoil.Monofin with neutral buoyancy.Better strength and improved resistance to impact and crack propagation thanks to S Glass.
TECHNOLOGYTechnology : prepregFabric : S-glass fibre Resin : epoxyPerformance : 4 to 5% more responsive than E-glassElastic limit : 10 to 15 % more strength than E-glassAST
MW1SG / MW2SG / MW3SG
FOOTPOCKETSMade-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better strokeSole with 20° angle to align the blade with the legs and to relax ankle stressesFootpocket offset from the center of the blade to maximize the lever arm effect
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 715 mmSurface area of the pair of blades : 3190 cm2Flat blade with AST structure 3 kinds of varying hardness that are most likely to suit your style and body type : MW1SG : soft, finswimming (5-20km) and dynamic apneaMW2SG : medium, finswimming (5-10km), dynamic and constant apneaMW3SG : hard, finswimming (200-1500m), dynamic and constant weight apneaWings with NACA waterfoil for better hydrodynamic performanceWeight with made-to-measure footpocket : 3 kgNeutral buoyancy
TECHNOLOGYTechnology : prepregFabric : high-strength carbon fibre Resin : epoxyPerformance : 15 to 20% more responsive than E-glassElastic limit : identical strenght than E-glassAST
DESCRIPTIONOur monofin with wings is the high end performance monofin with our latest evolution. It’s all about thrust and flow.E glass blade built with AST and wings with NACA waterfoil.Monofin with neutral buoyancy.Very high thrust thanks to the mechanical properties of our high strength carbon.
MW1C5 / MW2C5 / MW3C5
FOOTPOCKETSMade-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better strokeSole with 20° angle to align the blade with the legs and to relax ankle stressesFootpocket offset from the center of the blade to maximize the lever arm effect
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 715 mmSurface area of the pair of blades : 3190 cm2Flat blade with AST structure 3 kinds of varying hardness that are most likely to suit your style and body type : MW1C5 : soft, finswimming (5-20km) and dynamic apneaMW2C5 : medium, finswimming (5-10km), dynamic and constant apneaMW3C5 : hard, finswimming (200-1500m), dynamic and constant weight apneaWings with NACA waterfoil for better hydrodynamic performanceWeight with made-to-measure footpocket : 3 kgNeutral buoyancy
TECHNOLOGYTechnology : prepregFabric : intermediate modulus carbon fibre Resin : epoxyPerformance : 5 to 6% more responsive than carbon C5Elastic limit : 4 to 5 % more strength than carbon C5AST
DESCRIPTIONOur monofin with wings is the high end performance monofin with our latest evolution. It’s all about thrust and flow.E glass blade built with AST and wings with NACA waterfoil.Monofin with neutral buoyancy.Extraordinary thrust thanks to the mechanical properties of our intermediate modulus carbon.
MW1C8 / MW2C8 / MW3C8
FOOTPOCKETSMade-to-measure footpocket : Size 35 to 50 (3 to 15), free heel for better strokeSole with 20° angle to align the blade with the legs and to relax ankle stressesFootpocket offset from the center of the blade to maximize the lever arm effect
SPECIFICATIONSHeight of blade : 600 mmWidth of blade : 715 mmSurface area of the pair of blades : 3190 cm2Flat blade with AST structure 3 kinds of varying hardness that are most likely to suit your style and body type : MW1C8 : soft, finswimming (5-20km) and dynamic apneaMW2C8 : medium, finswimming (5-10km), dynamic and constant apneaMW3C8 : hard, finswimming (200-1500m), dynamic and constant weight apneaWings with NACA waterfoil for better hydrodynamic performanceWeight with made-to-measure footpocket : 3 kgNeutral buoyancy
D3
D4
D5
D2
D1
760B2C
5
Carbon
Mad
e in
France
760B
2C5
Carbon
Mad
e in
Fra
nce
760B2C
5
Carbon
Mad
e in
France
760B
2C5
Carbon
Mad
e in
Fra
nce
760B2C
5
Carbon
Mad
e in
France
DESCRIPTIONElastomer decoration film hot pressed during the polymerization of the composite blade.This film can be placed, depending on the options selected, either on the front side (footpocket side) or on the back side (heel side) or on both sides of the blade.
COLORSwhite, red, orange, green, blue, yellow,light grey, dark grey, metal grey
USERegardless of aesthetics, our decorations are mainly used for safety reasons to be better identified in freediving, spearfishing and finswimming . Freedivers and underwater hunters prefer light colors while the finswimmers choose bright colors.
PATTERNSD1, D2, D3, D4, D5, D6, D7, D8, D9, D10
D6 D8
D9D7
760B2C5
Carbon
Mad
e in Fran
ce
760B
2C5
Carbon
Mad
e in
Fra
nce
760B2C
5
Carbon
Mad
e in
France
D10
760B2C
5
Carbon
Mad
e in
France
760B
2C5
Carbon
Mad
e in
Fra
nce
DESCRIPTIONElastomer decoration film hot pressed during the polymerization of the composite blade.This film can be placed, depending on the options selected, either on the front side (footpocket side) or on the back side (heel side) or on both sides of the blade.
COLORSwhite, red, orange, green, blue, yellow,light grey, dark grey, metal grey
USERegardless of aesthetics, our decorations are mainly used for safety reasons to be better identified in freediving, spearfishing and finswimming . Freedivers and underwater hunters prefer light colors while the finswimmers choose bright colors.
PATTERNSD1, D2, D3, D4, D5, D6, D7, D8, D9, D10
SNORKEL FOR ADULTTube diameter : 25 mmTube length : 480 mmDecorated snorkel available in many different coloursAnatomical mouth piece made with high quality silicone : black or transparentStainless steel headband : screw locking on the tubeSimple adjustment to the size of the head using the strap in black silicone
SNORKEL
SNORKEL FOR CHILDTube diameter : 20 mmTube length : 480 mmDecorated snorkel available in many different coloursAnatomical mouth piece made with high quality silicone : black or transparentStainless steel headband : screw locking on the tubeSimple adjustment to the size of the head using the strap in black silicone
DESCRIPTIONFront snorkel for adults and children for training and competition at competitive standards