model m26 manifold line for 266 pressure transmitters · m26 manifod ine for 266 pressre...

— ABB meAsurement & AnAlytics | dAtA sheet

Model M26 Manifold line for 266 pressure transmitters

2 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H

—Measurement made easyEngineered solutions for all applications

—

Comprehensive wetted material portfolio

—

Accessories available•Bolts and brackets allow multiple installations and grant full transmitter

support

—

Tee bars easily manoeuvrable

—

Tailored manifold to meet user’s needs

—

Perfect interface •between process and transmitter thanks to the most common connection

types

—

Colour coded functional identification

3M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H

—Functional specifications

Manifold pressure rating vs. process temperature:Standard PTFE packing and gaskets

PTFE propertiesMechanical properties

PtFe has good tensile properties different from other plastic materials as it may be used over a wide temperature range from – 250°c to +250°c ( -418°F to +482°F ) . PtFe shows the lowest friction values compared to other plastic materials. Furthermore, being the static friction values almost equal to the dynamic friction values, there is no tendency to seizure within a sliding system situation, and therefore no detachment friction.

Electrical propertiesPtFe has very good electrical properties. dielectric strength is excellent and remains unchanged even at high temperature, it only decreases depending on the material thickness and on the electrical frequency values. dielectric constant values and dissipation factor are among the lowest values and remain unchanged even at high temperatures and at a wide frequency range. Good resistance to arc and corona effect.

Other propertiesPtFe surfaces are highly anti adhesive and do not absorb moisture. PtFe is non-toxic and can be used in contact with food. there are some limitations only for some kinds of filled PtFe due to the toxicity of some filling elements ( i.e. heavy metals and its compounds ) .

External agents resistancePtFe is considered inert towards nearly all known chemical elements and it is insoluble in all solvents. it is only attached by elemental alkali metals, and by chlorine trifluoride and elemental Fluorine at high temperatures and pressures. Fluorinated hydrocarbons can have a swelling effect on PtFe but it is a reversible situation, while some fluorinated oils, around 300°c ( 5 72°F ) temperature, swell anddissolve PtFe. PtFe is completely untouched by light and atmospheric agents. its resistance to nuclear radiations is rather low, it is affected by it starting from 105 rad. with a lowering of the tensile properties.

Manifold pressure rating vs. process temperature:optional Graphoil packing and gaskets

Graphoil propertiesMechanical properties

Graphoil may be used over a wide temperature range from – 250°c to +600°c ( -400°F to +1112°F ) . it features high resistance to corrosion, heat and fire. Graphoil is generally used in high temperature processes where thermal and/or mechanical shocks can occur. it provides an excellent seal even with low torques or irregular flange surfaces.

Other propertiesGraphoil is a packing and gasket material made exclusively from natural graphite flake. its high degree of chemical compatibility makes Graphoil inert to most chemicals and gases with the exception of strong oxidizing agents.


—...Functional specifications

Standard supplied partsm26 manifolds are always supplied with:• PtFe gaskets for transmitter connection (for

flanged models)• 1 or 2 Plugs 1/4“ nPt-m (according to the selected

model)• carbon steel bolts• certificate of compliance with the order

en10204-2.1• inspection certificate en 10204-3.1 of process

wetted parts.

ImportantPlease ask for a supplementary check if your application is close to the limits shown in the above picture (230°c and/or 6000 psi).

Importantthe maximum working temperature of the whole assembly (manifold and instrument) corresponds to the temperature limit of the pressure transmitter.

ImportantWhen the manifold is assembled to a 2600t pressure transmitter with nAce compliance A4-50 stainless steel bolts (available on request), please note that the maximum working pressure is limited to 210 bar (3045 psi).


—

Specification – physical(refer to ordering information sheets for variant availability related to specific model or versions code)

MaterialsBody, bonnet and nut

Aisi 316 l ss; hastelloy c-276™; monel 400™; inconel 625

Mounting bracket (*)Zinc plated carbon steel; Aisi 316 l ss.

Gaskets PtFe, other available on request.

BoltsZinc plated carbon steel; Aisi 316 ss bolts and nuts class A4–50 per uni 7323 (isO 3506), in compliance with nAce mr0175 class ii (as option).

(*) The mounting bracket kit contains:

bracket, U-bolts, cap screws, nuts, lock washers, spacers and

assembling instruction.


—Configuration

Two-valve manifold configurations(refer to ordering information sheets for options related to specific model or versions code)

M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connectionsinlet (process connection) 1/2in.-14NPTmaleOutlet (transmitter side) 1/2in.-14NPTfemale

drain 1/4in.-18NPTfemale

Packing PtFerating 690bar(69MPa,10000psi)included accessory 1plug1/4in.-18NPTmale

M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connections

inlet (process connection) 1/2in.-14NPTfemale

Outlet (transmitter side) 1/2in.-14NPTmale



M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connections

inlet (process connection) 1/2in.-14NPTmale

Outlet (transmitter side) 1/2in.-14NPTfemale



Note:

For details about the correct codification of each single model of

manifold, please refer to the ordering information at the end of this

document.


M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connectionsinlet (process connection) 1/2in.-14NPTfemaleOutlet (transmitter side) 1/2in.-14NPTfemale



M26.D.A.S.2.V. - Two-valve bar stock manifold for DP Style transmitters

Body configuration For standard flanges transmitters

inlet (process connection) 1/2in.-14NPTfemaleOutlet (transmitter side) FlangedaccordingIEC61518/B


Packing PtFerating 413.3bar(41.37MPa,6000psi)

included accessory

1plug1/4in.-18NPTmale1PTFEgasketfortransmitterflangedside(IEC61518/B)2Carbonsteelscrews7/16in.UNF(length2in.)

M26.D.A.V.2.V. - Two-valve bar stock manifold for DP Style transmitters

Body configuration For vertical flanges transmitters




included accessory

1plug1/4in.-18NPTmale1PTFEgasketfortransmitterflangedside(IEC61518/B)2Carbonsteelscrews7/16in.UNF(length13/4in.)

Note:



document.


—...Configuration

Three-valve manifold configurations(refer to ordering information sheets for options related to specific model or versions code)

M26.D.A.S.3.V. - Three-valve bar stock manifold for DP transmittersBody configuration For standard flanges transmittersinlet (process connection) 1/2in.-14NPTfemaleOutlet (transmitter side) FlangedaccordingIEC61518/B



included accessories


M26.D.A.V.3.V. - Three-valve bar stock manifold for DP transmitters






2plug1/4in.-18NPTmale

2PTFEgasketfortransmitterflangedside(IEC61518/B)4Carbonsteelscrews7/16in.UNF(length13/4in.)

Note:



document.


Three-valve manifold configurations(refer to ordering information sheets for options related to specific model or versions code)

M26.D.A.S.5.V. - Five-valve bar stock manifold for DP transmittersBody configuration For standard flanges transmittersinlet (process connection) 1/2in.-14NPTfemaleOutlet (transmitter side) FlangedaccordingIEC61518/B





M26.D.A.V.5.V. - Five-valve bar stock manifold for DP transmitters






2plug1/4in.-18NPTmale

2PTFEgasketfortransmitterflangedside(IEC61518/B)4Carbonsteelscrews7/16in.UNF(length13/4in.)

Note:



document.


—Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT male inlet and 1/2 in. - 14 NPT female outlet);pressure rating 690 bar (69 MPa, 10000 psi)

M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT female inlet and 1/2 in. - 14 NPT male outlet);pressure rating 690 bar (69 MPa, 10000 psi)

22 (0.87)

148 (5.83)

VEN

T.

ISO

LATE

FULLY OPEN

57 (2

.24

)

30 (1

.18)

1/4" NPT-F DRAIN

30 (1.18)

IN

120

(4.7

2)

OU

T

30 (1.18)

56 (2

.20

)

30 (1

.18)

22 (0.87)

Ø5,5 (0.21)

148 (5.83)

VEN

T.

ISO

LAT

E

FULLY OPEN12

0 (4

.72)

OU

TIN

1/4" NPT-F DRAIN


M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT male inlet and outlet);pressure rating 690 bar (69 MPa, 10000 psi)

Ø5,5 (0.22)

120 (4

.73)

34 (1.34

)30

(1.18)

143 (5.63)

22 (0.87)

FULLY OPEN

1/4" NPT-F DRAIN

ISOLATE

VENT

30 (1.18)

OU

TIN


—...Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT female inlet and female outlet);pressure rating 690 bar (69 MPa, 10000 psi)

VEN

T.

50 (1.97)

1/4" NPT-F DRAININ

OU

T

60 (2

.36)

168 (6.61)

30 (1

.18)

VEN

T.

ISO

LAT

EIS

OLA

TE

FULLY OPEN

N°2 FIXING HOLES Ø7 (0.27)


M26.D.A.V.2.V. Two-valve manifold for vertical flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet andflanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).

2x Ø12 (0.47)

1/4" NPT-F DRAIN

INLET SIDE1/2" NPT-F

INSTRUMENT SIDE(IEC 61518/B)

ISOLATE

VENT

32 (1.30)

108,

2 (4

.26)

20 (0.79)

75 (2.95)

131,4 (5.17)FULLY OPEN

FULL

Y O

PE

N

10 (0

.39)

42,5 (1.77)


—...Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)M26.D.A.S.2.V. Two-valve manifold for standard flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inletand flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).

60 (2

.36) 89

(3.5

0)

40 (1.57)

71,4 (2.81)

41,

3 (1

.63)

18 (0.71)

75 (2.95)

131,4 (5.17)

35 (1.38)

11 (0

.43)

16 (0

.63)

61 (2.40)

M10 x 1.5

1/4" NPT-F DRAIN

2X Ø12 (0.47)


FULLY OPENFULLY OPEN

INLET SIDE1/2" NPT-F

VENT

ISOLATE

FULL

Y O

PE

N


M26.D.A.S.3.V. Three-valve manifold for standard flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inletand flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).

105 (4.13)

217,8 (8.57)

54 (2.13)

41,

3 (1

.63)

4x Ø12

(0.47)

72,9 (2.87)

40 (1.57)

60 (2

.36)

88,1

(3.4

7)


INLET SIDE2x 1/2" NPT-F

FULL

Y O

PE

N

FULLY OPEN

20 (0

.79)

30 (1.18)84 (3.30)

16 (0

.63)

EQUALISE

ISOLATEISOLATE

2x 1/4" NPT-F DRAIN2x M10x1.5


—...Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)M26.D.A.V.3.V. Three-valve manifold for vertical flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inletand flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).

80 (3.15)

16 (0

.63)

41,

3 (1

.63)

54 (2.13)

150 (5.90)

258 (9.96)

Ø12

(0.4

7)

85 (3.35)

10 (0

.39)

2x 1/4" NPT-F DRAIN

ISOLATEISOLATE

EQUALISE

2x M10x1.5

70 (2

.75)

32 (1.26)

126,

3 (4

.97)

FULL

Y O

PE

N


INLET SIDE

2x 1/2" NPT-F


M26.D.A.S.5.V. Five-valve manifold for standard flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inletand flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).

Ø12

(0.4

7)

54 (2.13)

155 (6.10)

267,8 (10.54)

41,

3 (1

.63)

40 (1.57)

71,4 (2.81)

109

(4.2

9)

60 (2

.36)

30 (1.18)

115 (4.53)

30 (1

.18)

24 (0

.94

)

INLET SIDE

2x 1/2" NPT-F

INSTRUMENT SIDE

(IEC 61518/B)

EQUALISE

ISOLATEISOLATE

2x 1/4" NPT-F DRAIN

2x M10 FIXING HOLES

VENTVENT


—...Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)M26.D.A.V.5.V. Five-valve manifold for vertical flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet andflanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).

41,

3 (1

.63)

54 (2.13)

150 (5.90)

262,8 (10.35)

80 (3.15)

16 (0

.63)

70 (2

.75)12

6,3

(4.9

8)

32 (1.26)INSTRUMENT SIDE

(IEC 61518/B)

INLET SIDE

2x 1/2" NPT-F

VENT

ISOLATE

EQUALISE

ISOLATE

VENT

FULL

Y O

PE

N

85 (3.35) 2x 1/4" NPT-F DRAIN

FULLY OPEN

2x M10x1.5


Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V.(1/2 in. - 14 NPT male inlet and 1/2 in. - 14 NPT female outlet threaded connection).

Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V.(1/2 in. - 14 NPT female inlet and 1/2 in. - 14 NPT male outlet threaded connection).

116 (4.57)

72 (2.83)

62 (2

.44

)

282

(11.

08)

224

(8.8

2)

105 (4.12)

18 (0.71)Space for

cover removal

58 (2.28)

9 (0.35)91 (3.58)16

2 (6

.37)

143 (5.63)

36 (1

.42)

49 (1.93)

1/2" - 14 NPT

162

(6.3

5)

18 (0.71)Space forcover removal

78 (3.04)55 (2.16)

116 (4.57)

72 (2.83)

62 (2

.44

)

282

(11.

08)

224

(8.8

2)

105 (4.12)

18 (0.71)Space for

cover removal

58 (2.28)

9 (0.35)91 (3.58)

148 (5.83)

36 (1

.42)

49 (1.93)

179

(7.0

2)

1/2" - 14 NPT

142

(5.5

7)Space forcover removal

18 (0.71)78 (3.04)55 (2.16)


—...Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V.(1/2 in. - 14 NPT male inlet and outlet threaded connection).

Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V.(1/2 in. - 14 NPT female inlet and outlet threaded connection).

116 (4.57)

72 (2.83)

62 (2

.44

)

282

(11.

08)

102

(3.9

9)

105 (4.12)

18 (0.71)Space for

cover removal

58 (2.28)

9 (0.35)91 (3.58)16

2 (6

.37)

168 (6.61)

36 (1

.42)

1/2" - 14 NPT


78 (3.04)55 (2.16)

116 (4.57)

72 (2.83)

62 (2

.44

)

282

(11.

08)

102

(3.9

9)

105 (4.12)

18 (0.71)Space for

cover removal

58 (2.28)

9 (0.35)91 (3.58)

162

(6.3

7)

168 (6.61)

36 (1

.42)

1/2" - 14 NPT


78 (3.04)55 (2.16)


Pressure transmitter DP-Style (266PSH, 266VSH, 266RSx) on manifold bracket with M26.D.A.S.2.V.(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)

Pressure transmitter DP-Style (266PSH, 266VSH, 266RSx) with vertical flanges on manifold bracket with M26.D.A.V.2.V.(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)

18 (0.71)91 (3.58) Space for

cover removal15

8 (6

.23)

179

(7.0

2)

58 (2.28)

9 (0.35)

88 (3.45)

208

(8.1

9)


78 (3.04)55 (2.16)

88 (3.43)

104 (4.06)

71 (2.77)

18 (0.71)91 (3.58) Space for

cover removal

92 (3

.63)

243

(9.5

7)

50 (1.97)

48

(1.8

9)

58 (2.28)

9 (0.35)

118 (4.63)


78 (3.04)55 (2.16)

144 (5.68)

217 (8.55)


—...Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.S.3.V.(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)

Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.V.3.V.(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)

18 (0.71)91 (3.58) Space for

cover removal15

8 (6

.23)

179

(7.0

2)

54 (2.13)

58 (2.28)

9 (0.35)

217.8 (8.57)

208

(8.1

9)


78 (3.04)55 (2.16)

88 (3.43)

11 (0

.43)

142 (5.59) 104 (4.06)

71 (2.77)

18 (0.71) 18 (0.71)91 (3.58) Space for

cover removal

92 (3

.63)

229

(9.0

1)

258 (9.96)

62 (2

.45)

78 (3.04)58 (2.28)

9 (0.35) Space forcover removal

55 (2.16)

144 (5.68)236 (9.28)


Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.S.5.V.(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)

Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.V.5.V.(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)

18 (0.71)91 (3.58) Space for

cover removal

158

(6.2

3)17

9 (7

.02)

54 (2.13)

58 (2.28)

9 (0.35)

267.8 (10.54)

208

(8.1

9)


78 (3.04)55 (2.16)

88 (3.43)

11 (0

.43)

104 (4.06)

71 (2.77)

18 (0.71) 18 (0.71)91 (3.58) Space for

cover removalSpace forcover removal

92 (3

.63)

229

(9.0

1)

262.8 (10.35)

62 (2

.45)

78 (3.04)55 (2.16)

58 (2.28)

9 (0.35)

144 (5.68)

236 (9.28)


—Ordering informationMain ordering information for model M26 manifold

select one character or set of characters from each category and specify complete catalogue number.refer to additional ordering information and specify one or more codes for each transmitter if additional options are required.

Base model - 1st to 3rd characters M 2 6 X X X X X X X X X X

Manifold model for pressure transmitter

Design - 4th character

manifold for dP style transmitters d

manifold for P style transmitters P

Revision - 5th character

revision A A

Body configuration - 6th character

standard construction s

For vertical-flange transmitter (Note:1) V

Valves - 7th character

two-valve manifold 2

three-valve manifold (Note:1) 3

Five-valve manifold (Note:1) 5

Valve Type - 8th character

standard V

Material (wetted parts) - 9th character

StainlesssteelAISI316L nAce s

Hastelloy®C-276 nAce h

Monel400 m

Inconel625 n

Packing material - 10th character

PtFe P

Graphoil G

Gasket material (wetted parts) - 11th character

none (Note:2) n

PtFe (Notes:1,5) P

Graphoil (Notes:1,6) G

Manifold process connection (INLET)- 12th character

Threaded1/2in.-14NPT-female F

Threaded1/2in.-14NPT-male (Note:2) m

Manifold transmitter connection (OUTLET)- 13th character

FlangedoutletaccordingtoIEC61518/B (Note:1) 1

Threaded1/2in.-14NPT-female (Note:2) F

Threaded1/2in.-14NPT-male (Note:2) m


M26 X X X X X X X X X X X X X X X X X

Rating - 14th character

413.7bar(41.37MPa,6000psi) (Note:1) 6

690bar(69MPa,10000psi) (Note:2) 1

Transmitter fixing bolts - 15th characters

none (Note:2) n

carbon steel (Note:1) c

StainlessSteelNACEcompliant(MWP=21MPa,210bar,3045psi) (Note:1) s

Bracket kit - 16th character

none n

carbon steel bracket kit for pipe mounting (Notes:1,3) c

stainless steel bracket kit for pipe mounting (Notes:1,4) s

Material traceability - 17th character

InspectioncertificateEN10204–3.1ofprocesswettedparts 2

note 1: not available with design code Pnote 2: not available with design code dnote 3: not available with bolts code snote 4: not available with bolts code cnote 5: not available with packing material code Gnote 6: not available with packing material code P

Standard delivery items (can be differently specified by ordering code)• PtFe gaskets for transmitter connection (for flanged models)• 1 or 2 Plugs 1/4“ nPt-m (according to the selected manifold model)• carbon steel bolts• certificate of compliance with the order en10204-2.1• inspection certificate en 10204-3.1 of process wetted parts.

nAce cOnFOrmity is AccOrdinG tO recommendations Per mr0175 2003 / isO 15156-3 FOr Aisi 316l,hAstellOy c-276, incOnel 625 And mOnel 400

3 and 5 valve m26 manifolds are in compliance with Asme B31.1 - Power Piping.

Trademarks ™ hastelloy c-276 is a cabot corporation trademark ™ monel is an international nickel co. trademark

manifold made in italy by sAmi instruments srl

DS

/M

26

-EN

RE

v.

H 1

1.20

18

—ABB Ltd. Measurement & AnalyticsHoward Road St. Neots Cambridgeshire PE19 8EU UK Tel: +44 (0)1480 475321 Fax: +44 (0)1480 217948

ABB Inc. Measurement & Analytics125 E. County Line Road Warminster PA 18974 USA Tel: +1 215 674 6000 Fax: +1 215 674 7183

abb.com/measurement

ABB S.p.A. Measurement & Analyticsvia Luigi vaccani 4 22016 Tremezzina Loc. Ossuccio (CO) Italy Tel: +39 0344 58111

We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.

We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB.

© Copyright 2018 ABBAll rights reserved 3KXP7200007R1001

model m26 manifold line for 266 pressure transmitters · m26 manifod ine for 266 pressre...

Documents