mod 4017m 5c modularproducts
TRANSCRIPT
www.grassvalley.com/modular
2010 / 2011
MODULAR CATALOG
October, 2010
When the world is watching…we’re there!The Grass Valley™ brand is synonymous with the best content creation,management, and distribution solutions available. That’s why some of theworld’s top broadcast and teleproduction companies continue to place their trust, and their business, with Grass Valley.
When it comes to mission-critical signal management components, you want a brand that you can trust. This is where Grass Valley can help.From single-function applications to complex processing of multiple program streams, Grass Valley modular products offer a range of analog, SD, HD, and new 3G-SDI signal processing and distribution capabilities. Most modules can be set up with the easy-to-use NetConfig™ application and status monitored via NetCentral™ SNMP-based remote monitoring software.
This Ordering Guide is designed to help you easily find the right modular product for your next project or upgrade. For the very latest information on Grass Valley Modular products, please visit www.grassvalley.com/modular.
With Sincere Appreciation,
The Grass Valley Modular Products Team
Grass Valley 400 Providence Mine Road • Nevada City, CA 95959+1 530 478 3000
www.grassvalley.com
24 8901 Utility Analog Video Distribution Amplifier
25 8902 Analog Video Equalizing Distribution Amplifier
26 8906 Analog Video Clamping Equalizing Distribution Amplifier w/SNMP
27 8931 Digital Video Fanout Distribution Amplifier
28 8937 SDI/ASI Reclocking Equalizing Distribution Amplifier
29 8937D Dual SDI/ASI Reclocking Equalizing Distribution Amplifier
30 8941 Component Digital Video Monitoring Distribution Amplifier
31 8943RDA SD/HD/3G Reclocking Distribution Amplifier
32 8943RDA-DFR Fiber-Ready SD/HD/3G Reclocking Distribution Amplifier
33 8943RDA-DFR Fiber-Ready SD/HD/3G Reclocking Distribution Amplifier
34 8943RDA-D Dual SD/HD/3G Reclocking Distribution Amplifier
35 8945EDA SD/HD Equalizing Distribution Amplifier
36 8945EDA-D Dual SD/HD Equalizing Distribution Amplifier
37 8947RDA-D Dual SD/HD Reclocking Distribution Amplifier
38 8947RDA-FR Fiber-Ready SD/HD Reclocking DA
39 8949MDA-CXF PAL/NTSC Monitoring Distribution Amplifier
40 8949MDA-SXF SDI Monitoring Distribution Amplifier
Table of Contents
Modular CatalogAudio Distribution and Processing Modules
Video Distribution Modules
2 0 1 0 / 2 0 1 1
3 8910ADA-M Monaural Analog Audio Distribution Amplifier
4 8910ADA-SR Stereo Analog Audio DA w/Remote Control
5 8910ADA-ST Stereo Analog Audio Distribution Amplifier
6 8911 AES/EBU Reclocking Digital Audio Distribution Amplifier
7 8912RDA AES Reclocking Digital Audio Distribution Amplifier
8 8912RDA-D Dual AES Reclocking Digital Audio DA
9 8914 Dual AES/EBU Digital Audio Delay Distribution Amplifier
10 8916 AES/EBU Autotracking Digital Audio Delay DA
11 8920ADC Audio A-to-D Converter
12 8920ADT Audio A-to-D Converter with Autotracking Delay
13 8920DAC Audio D-to-A Converter
14 8920DMX Video/Audio Demultiplexer (De-embedder)
15 8920MUX Video/Audio Multiplexer (Embedder)
16 8921ADT Four-Channel Audio A-to-D Converter w/Delay Tracking
17 8921DAC Four-Channel Audio D-to-A Converter w/Delay
18 8925DMB-B SD/HD Balanced Audio De-Embedder
19 8925DMB-U SD/HD Unbalanced Audio De-Embedder
20 8925EMB-B SD/HD Balanced Audio Embedder
21 8925EMB-U SD/HD Unbalanced Audio Embedder
22 8977AP-4B Digital Audio Processor – Balanced I/O w/Delay
23 8977AP-4U Digital Audio Processor – Unbalanced I/O w/Delay
2 Table of Contents
41 8900FSS 4:2:2 Frame Synchronizer/Delay Submodule
42 8900GEN-SM GeckoFlex Reference Input Submodule
43 8964FS Four-Channel SDI Frame Synchronizer
44 8981FS SDI Frame Synchronizer/Delay
45 8981NR 270 Mb/s SDI Noise Reducer Module
46 8990ARC SDI Aspect Ratio Converter
47 8985FS SD/HD Video Frame Synchronizer
49 8985FSP SD/HD Frame Synchronizer w/Proc. Amp & Color Corrector
51 8985PRC SD/HD Video Processing Amplifier
53 8995DNC Downconverter and Frame Sync
55 8995UDX Up/Down/Crossconverter and Frame Sync
57 8995UPC Upconverter and Frame Sync
59 8935CF 4-Channel Electrical to 4-Channel Fiber Optic Conversion Module
60 8935FC 4-Channel Fiber Optic to 4-Channel Electrical Conversion Module
61 8943CF 4-Channel Electrical to 4-Channel Fiber Optic Conversion Module
62 8943FC 4-Channel Fiber Optic to 4-Channel Electrical Conversion Module
63 8939FCA/8939FCB Fiber Optic Mux/Demux Modules
65 Fiber Optic SFP Devices68 Fiber Media Converter Devices
69 8949SVM-UMD/-LOC SD/HD-SDI Single Viewing Module
Video Conversion, Synchronization and Processing Modules
Fiber-Optic Conversion and Optical Devices
Analog Video Modules
Frames, Monitoring, and Support
70 8950ADC Component A-to-D Converter
71 8950DAC Component D-to-A Converter
72 8960DEC NTSC/PAL to SDI Decoder
73 8960ENC SDI to NTSC/PAL Encoder
74 8964DEC Four-Channel NTSC/PAL to SDI Decoder
75 8964ENC Four-Channel SDI to NTSC/PAL Encoder
76 7600REF Reference and Test Signal Generator
77 7620PX Changeover Unit
78 8972PX Protection Switch
79 NetCentral 5.2 Comprehensive Remote-Monitoring Software
80 GeckoFlex Module Control
81 Newton Modular Control System
86 GeckoFlex Frame
90 8900NET Network Interface Module (Net Card)
Specifications Ordering Information
MonauralBalanced
Input
EightMonauralBalancedOutputs
SelectableGain Amp
Output Amps
GainRange >6 dB
Stepped Gain6 dB per Step
-12
+
–
+30
Specifications Ordering Information
J1
J2J3
J4J5
J6J7
J8
J9
J10
J11
J13
J12
J14
8900A-R
AnalogAudio
Outputs
AnalogAudioIntput
Not Used
Not Used Not Used
Not Used
Not Used
AnalogAudioOutputs
Pin 3Pin 2Pin 1
Pin 1Pin 2Pin 3
+_
G
G_
+
3
Key FeaturesEight monaural outputs•
Frequency response of 20 Hz to 20 kHz •±0.05 dB
Gain range from –15 dB to +33 dB•
Max output level +24 dBu•
AC coupled input, eliminates DC •component
Remote monitoring via Ethernet•
The 8910ADA-M offers cost-effective distribution of monaural analog audio throughout your facility. It features a flat frequency response to maintain signal integrity. You can easily monitor the condition of the 8910ADA-M with our popular Ethernet interface, which provides a convenient Web interface and SNMP monitoring capability. We offer a wide range of gain controls using a combination of board jumpers and local gain control from the front of the module.
Supported Frame TypesGeckoFlex™ with 8900A-R GeckoFlex Audio rear module, Gecko™ audio frames: 8900TX-A, 8900TF-A, 8900TFN-A
Power Rating2.3 Watts – single slot
InputImpedance: >24 kΩ
Level: +30 dBu max.
CMRR: >72 dB, 60 Hz to 20 kHz
OutputNumber of outputs: Eight balanced outputs
Impedance: <50Ω balanced
Level: ≤+24 dBu
Level match between outputs: ≤±0.25 dB
Output to output isolation: >100 dB
Drive capability: 600Ω minimum load impedance
PerformanceFrequency response: ±0.05 dB, 20 Hz to 20 kHz
THD: <0.01% @ +24 dBu
IM distortion: <0.005% @ 24 dBu
Noise: –86 dBu max.
Gain range: –15 to +33 dB
OtherUser controls: Input gain, >6 dB range
Gain jumpers: –12 to +30 dB gain in 8, 6 dB steps
Operating temperature: 0° to 45°C
Humidity range: 0% to 90% non-condensing
Non-operating temperature: –10° to 70°C
Remote – SNMP alarms
8910ADA-M Monaural Analog Audio Distribution Amplifier
This module can be mounted in a GeckoFlex frame when ordered with the 8900A-R GeckoFlex Audio rear module.
8910ADA-M Monaural analog audio distribution amplifier
8900-A-CBL (Gecko Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on modules in a Gecko frame
8900-GFA-CBL (GeckoFlex Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on 8900A-R modules in a GeckoFlex frame
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering InformationSpecifications Ordering Information
J1
J2J3
J4J5
J6J7
J8
J9
J10
J11
J13
J12
J14
8900A-R
AnalogAudio 1Outputs
AnalogAudio 1
Intput
Not Used Not Used
PotentiometerGain
PotentiometerBalance
AnalogAudio 2
Intput
AnalogAudio 2Outputs
Pin 1Pin 2Pin 3
Pin 3Pin 2Pin 1
+_
G
G_
+
Specifications Ordering Information
LEDs
Balanced Inputs
Balanced Outputs
Hard-wired poteniometer for fine Gain
Hard-wiredpotentiometer for fine Balance
Processor
Audio 1Output
Audio 2Output
Channel 1Output Amps
Channel 2Output Amps
AudioInput 2
AudioInput 1
Gain
0.1 dBGainTrim
0.1 dBGainTrim
AnalogProcessing
&A/D
Balance
DigitalVolume Control
(0.5 dB resolution)
DigitalVolume Control
(0.5 dB resolution)
SumSwapModes
4
The 8910ADA-SR offers full-featured distribution of monaural or stereo analog audio signals. In stereo mode, there are four stereo outputs, and in monaural mode there are eight outputs. With this module, audio signals can be summed for monaural monitoring, swapped L to R, or phase inverted to fix upstream transmission problems. Featuring flat frequency response to maintain signal integrity, the 8910ADA-SR offers a wide range of gain and balance control options, including local module control (using paddle controls and a hard-wired potentiometer for fine adjustment of ±6 dB), Ethernet-connected Newton™ control panels, and Web browser interface. The user-enabled audio presence detection feature generates SNMP traps that can be sent to our NetCentral SNMP manager, or other SNMP systems for mission-critical applications.
Key FeaturesStereo and monaural modes•
Audio presence detection with SNMP •reporting
Frequency response of 20 Hz to 20 kHz •±0.05 dB
Gain/balance level controls•
Gain range from –20 dB to +30 dB set •with remote controls or front edge paddle switch
Sum, swap, or invert signals•
Max. output level +28 dBu•
Hard-wired potentiometers via rear •BNC connectors for ±6 dB fine gain and balance control in Local Mode
Input present (>–40 dBu) detection•
Remote monitoring and control via •Ethernet
Supported Frame TypesGeckoFlex with 8900A-R GeckoFlex Audio rear module, Gecko audio frames: 8900TX-A, 8900TF-A, 8900TFN-A
Power Rating5 Watts – single slot
InputImpedance: 18 kΩ to 30 kΩ
Level: +30 dBu max.
CMRR: >72 dB, 60 Hz to 20 kHz
OutputNumber of outputs: Four balanced stereo outputs or eight balanced monaural outputs
Impedance: <50Ω balanced
Level: ≤+28 dBu
Level match between outputs: ≤±0.25 dB
Gain tracking between channels: <0.3 dB
Output to output isolation: >100 dB
PerformanceFrequency response: 20 Hz to 20 kHz ±0.05 dB
THD: <0.05% @ 24 dBu
IM distortion: <0.025% @ 24 dBu
Noise: –75 dBu max.
Crosstalk: >95 dB 20–20 kHz @ 0 dB
Overall gain range: –20 to +30 dB
Hard-wired potentiometer gain/balance range (local mode only): ±6.0 dB
OtherUser gain controls: Input gain, –12 dB to +30 dB, stereo/mono mode select
Operating temperature: 0° to 45°C
Humidity range: 0% to 90% non-condensing
Non-operating temperature: –10° to 70°C
Remote – SNMP alarm
8910ADA-SR Stereo Analog Audio DA w/Remote Control
This module can be mounted in a GeckoFlex frame when ordered with the 8900A-R GeckoFlex Audio rear module.
8910ADA-SRStereo analog audio distribution amplifier with remote control
8900-A-CBL (Gecko Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on modules in a Gecko frame
8900-GFA-CBL (GeckoFlex Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on 8900A-R modules in a GeckoFlex frame
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Balanced Input
Balanced Outputs
Audio 1Balanced Monaural
Input
Audio 2Balanced
Input
Monaural
Audio 1/MonauralOutputs
Audio 2/MonauralOutputs
Stereo
SelectableGain Amp
Output AmpsGainRange >6 dB
GainRange >6 dB
Stepped Gain6 dB per Step
Stepped Gain6 dB per Step
-12
+
–
+
–
+30
-12 +30
Specifications Ordering Information
J1
J2J3
J4J5
J6J7
J8
J9
J10
J11
J13
J12
J14
Pin 3Pin 2Pin 1
Pin 1Pin 2Pin 3
8900A-R
AnalogAudio 1Outputs
AnalogAudio 1
Intput
Not Used
Not Used Not Used
Not Used
AnalogAudio 2
Intput
AnalogAudio 2Outputs
+_
G
G_
+
5
Key FeaturesStereo or monaural modes•
Frequency response of 20 Hz to 20 kHz •±0.05 dB
Independent local gain control for each •channel
Gain range from –15 dB to +33 dB•
Max. output level +24 dBu•
AC coupled input, eliminates DC •component
Remote monitoring via Ethernet•
The 8910ADA-ST offers cost-effective distribution of monaural or stereo analog audio throughout your facility. In stereo mode there are four pairs of outputs, and in monaural mode there are eight outputs. Featuring flat frequency response to maintain your signal integrity, the 8910ADA-ST offers a wide range of gain controls using a combination of board jumpers and local gain adjustment from the front of the module. Channel 1 and 2 gains are controlled separately so you can use this board as a dual 1x4 analog audio distribution amplifier. Additionally, you can easily monitor the condition of the module with our popular Ethernet interface, which provides a convenient Web interface, Newton control system, and SNMP monitoring.
Supported Frame TypesGeckoFlex with 8900A-R GeckoFlex Audio rear module, Gecko audio frames: 8900TX-A, 8900TF-A, 8900TFN-A
Power Rating2.2 Watts – single slot
InputImpedance: >24 kΩ
Level: +30 dBu max.
CMRR: >72 dB, 60 Hz to 20 kHz
OutputNumber of outputs: Four stereo outputs, eight mono
Impedance: <50Ω balanced
Level: ≤+24 dBu max.
Level match between outputs: ≤±0.25 dB
Output to output isolation: >100 dB
Drive capability: 600Ω minimum load impedance
PerformanceFrequency response: ±0.05 dB, 20 Hz to 20 kHz
THD: <0.01% @ +24 dBu
IM distortion: <0.005%
Noise: –86 dBu max.
Gain range: –15 to +33 dB
OtherUser controls: Input gain, >6 dB range each channel
Gain jumpers: –12 to +30 dB gain in 8, 6 dB steps
Operating temperature: 0° to 45°C
Humidity range: 0% to 90% non-condensing
Non-operating temperature: –10° to 70°C
Remote – SNMP alarms
8910ADA-ST Stereo Analog Audio Distribution Amplifier
This module can be mounted in a GeckoFlex frame when ordered with the 8900A-R GeckoFlex Audio rear module.
8910ADA-STStereo analog audio distribution amplifier
8900-A-CBL (Gecko Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on modules in a Gecko frame
8900-GFA-CBL (GeckoFlex Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on 8900A-R modules in a GeckoFlex frame
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Outputs Outputs
Input
Loopthru
8900V-R
DigitalAudioInput
Rx Reclocker
PhaseLockLoop
AESOutputs
6 8911 AES/EBU Reclocking Digital Audio Distribution Amplifier
Key FeaturesDifferential looping input offers excellent •common mode rejection (CMR)
Eight outputs•
Accepts 48, 44.1, and 32 kHz•
Reclocking removes jitter induced by long •cable runs
Note: for balanced 110Ω requirements see the 8912 series digital audio distribution amplifiers
The amount of digital audio is ever increasing as studios and broadcast facilities transition to digital. The 8911 offers a low-cost method of reclocking AES/EBU digital audio signals to ensure signal integrity. Best of all, the 8911 fits into our 8900-V series Gecko frames or into a GeckoFlex frame with an 8900V-R rear module, which boast passive differential loopthrough inputs, high density, and a wide range of distribution and format conversion functions.
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating3 Watts – single slot
InputNumber of inputs: One differential loopthrough
Connector: High Z
Standard: AES-3id-1995 and SMPTE 276M
Return loss: >25 dB (0.1 to 6 MHz)
CMRR: 60 dB @ 50/60 Hz
OutputNumber of outputs: Eight
Connector: 75Ω BNC
Standard: AES-3id-1995 and SMPTE 276M
Return loss: >25 dB (0.1 to 6 MHz)
PerformanceSample rates: 48 kHz, 44.1 kHz, and 32 kHz
Operating temperature: 0°C to 45°C ambient
Relative humidity: 0% to 90% non-condensing
Indicators and ControlsIndicators: Input audio present, power
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8911AES/EBU reclocking digital audio distribution amplifier
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
LEDs
Out 1
Out 2
Out 3
Out 4
Out 5
Out 6
Out 7
Out 8
T1Input
Unbalanced
BalancedReclocker
Microprocessor
J1
J2J3
J4J5
J6J7
J8
J9
J10
J11
J13
J12
J14
8900A-RPin 3Pin 2Pin 1
Pin 1Pin 2Pin 3
AESOutputs
AESInput
AESInput
AESOutputs
Not Used
Not Used
Not Used
Not Used
+_
G
G_
+
7
The 8912RDA brings balanced digital audio distribution to the 8900 family of products. This module complements the 8911 AES reclocking DA by offering terminal-screw connectors for those facilities requiring balanced I/O. With built-in impedance conversion, you can select either 75Ω or 110Ω inputs. In addition, we’ve added a powerful remote monitoring capability to enable you to keep track of all your conversion and distribution assets using our NetCentral SNMP-based remote monitoring software.
Key Features75Ω AES3 or 110Ω AES3 input•
Eight 110Ω AES3 outputs•
Autodetect data rate and reclock sample •rates from 32 kHz to 96 kHz
Lock indicator LED •
Remote monitoring via Ethernet•
Supported Frame TypesGeckoFlex with 8900A-R GeckoFlex Audio rear module, Gecko Audio frames: 8900TX-A, 8900TF-A, 8900TFN-A
Power Rating4 Watts – single slot
InputSignal type: AES-3id-1992 or AES3 transformer coupled
Number of inputs: One
Impedance: 75Ω, 110Ω, or High Z
Connectors: BNC or terminal block
Sample rate: 32 kHz to 96 kHz
Input return loss: (100 kHz to 10 MHz) >15 dB balanced, >25 dB unbalanced
Balanced input common mode voltage range: ±10V 50 Hz to 20 kHz
OutputSignal type: AES3 AC coupled
Number of outputs: Eight
Impedance: 110Ω
Connectors: Terminal block
Sample rate: 32 to 96 kHz
Output return loss: >15 dB (100 kHz, 10 MHz)
PerformanceReclocking: Yes
DC offset: <±1 mV
Ability to lock jitter: .2 UI
Intrinsic jitter: 0.025 UI
Electrical length: 135 µs @ 48 kHz (or ~6.5X sample rate period)
OtherUser controls: Input impedance
Operating temperature: 0° to 45°C
Humidity range: 0% to 90% non-condensing
Non-operating temperature: –10° to 70°C
Remote – SNMP alarm
8912RDA AES Reclocking Digital Audio Distribution Amplifier
This module can be mounted in a GeckoFlex frame when ordered with the 8900A-R GeckoFlex Audio rear module.
8912RDAAES reclocking digital audio distribution amplifier
8900-A-CBL (Gecko Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on modules in a Gecko frame
8900-GFA-CBL (GeckoFlex Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on 8900A-R modules in a GeckoFlex frame
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
Frame Bus
DualChannel
SingleChannel
T1
T2Reclocker
Reclocker
Microprocessor
Unbalanced
Unbalanced
Balanced
Balanced
CH 2Input
CH 1Input CH 1
Outputs
LEDs
Out 1a
Out 1b
Out 1c
Out 1d
CH 2Outputs
Out 2a
Out 2b
Out 2c
Out 2d
J1
J2J3
J4J5
J6J7
J8
J9
J10
J11
J13
J12
J14
Pin 3Pin 2Pin 1
Pin 1Pin 2Pin 3
8900A-R
AESCH1
Outputs
AESCH2
Outputs
AES CH1Input
AES CH1Input
AES CH2Input
AES CH2Input
AESCH2Outputs
AESCH1Outputs
Not Used Not Used
+_
G
G_
+
8
Key Features75Ω AES3 or 110Ω AES3 inputs•
Eight 110Ω AES3 outputs, or four 110Ω •AES3 outputs per channel when in dual mode
Auto-detect data rate and reclock sample •rates from 32 kHz to 96 kHz
Lock indicator LED for both channels•
Remote monitoring via Ethernet•
The 8912RDA-D brings low-cost balanced AES distribution to the 8900 family of products. This module complements the 8911 AES reclocking DA by offering terminal screw connectors for those facilities requiring balanced I/O. Where four or fewer outputs per input are required, this module provides a very compact solution. The flexibility of the 8912RDA-D allows you to switch easily between a 1x8 distribution amplifier and a dual 1x4 distribution amplifier. In addition, we’ve added a powerful remote monitoring capability to enable you to keep track of all your conversion and distribution assets using our NetCentral centralized SNMP-based remote monitoring software.
8912RDA-D Dual AES Reclocking Digital Audio DA
Supported Frame TypesGeckoFlex with 8900A-R GeckoFlex Audio rear module, Gecko Audio frames: 8900TX-A, 8900TF-A, 8900TFN-A
Power Rating4 Watts – single slot
InputSignal type: AES-3id-1992 or AES3 AC coupled
Number of inputs: Two
Impedance: 75Ω, 110Ω, or High Z
Connectors: BNC or terminal block
Sample rate: 32 to 96 kHz
Input return loss: (100 kHz to 10 MHz) >15 dB balanced, >25 dB unbalanced
Balanced input common mode voltage range: ±10V 50 Hz to 20 kHz
OutputSignal type: AES3 AC coupled
Number of outputs: Four per input
Impedance: 110Ω
Connectors: Terminal block
Sample rate: 32 to 96 kHz
Input return loss: >15 dB (100 kHz, 10 MHz)
PerformanceReclocking: Yes
DC offset: <±1 mV
Ability to lock jitter: 0.2 UI
Intrinsic jitter: 0.025 UI
Electrical length: 135 µs @ 48 kHz (or ~6.5X sample rate period)
OtherUser controls: Single/dual mode, input impedance
Operating temperature: 0° to 45°C
Humidity range: 0% to 90% non-condensing
Non-operating temperature: –10° to 70°C
Remote – SNMP Alarm
This module can be mounted in a GeckoFlex frame when ordered with the 8900A-R GeckoFlex Audio rear module.
8912RDA-DDual AES reclocking digital audio distribution amplifier
8900-A-CBL (Gecko Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on modules in a Gecko frame
8900-GFA-CBL (GeckoFlex Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on 8900A-R modules in a GeckoFlex frame
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900V-R
AES 2Outputs
AES 1Outputs
AES 1Input
Loopthru
AES 2Input
RX
RXAES 2
AES 1Delay
Delay
FPGA
AES2Outputs
AES 1OutputsLoopthrough
DelayControls
Serialto
Parallel
Serialto
Parallel
9
As the transition to digital video and audio accelerates, there is an increased need to delay the audio associated with broadcast video due to the relatively large processing times associated with DVEs and video production switchers. The 8914 provides a low-cost and easy-to-use solution to the lip sync errors associated with these large delays. We’ve included two fully controllable delay paths on a single board allowing up to 20 digital audio delays and distribution in a 2 RU frame. If you want more distribution instead, the first channel can be passively looped to the second channel for seven outputs. The 8914 is also a full-featured reclocking distribution amplifier.
Key FeaturesTwo full-function digital delays on a single •board
Up to 0.5 second delay in 2 ms increments •per channel
Four outputs on channel 1, three outputs •on channel 2
Up to 20 AES/EBU delays in a 2 RU 8900-V •frame
Accepts 32, 44.1, and 48 kHz audio signals•
Note: for balanced 110Ω requirements see the 8912 series digital audio distribution amplifiers
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V
Power Rating3.5 Watts – single slot
InputNumber of inputs: •Channel1:oneloopthrough•Channel2:oneterminated
Connectors: 75Ω BNC
Standard: AES-3id-1995 and SMPTE 276M
AES frame rates: 32, 44.1, or 48 kHz
Return loss: >25 dB (0.1 to 6 MHz)
OutputsNumber of outputs: •Channel1:four•Channel2:three
Connectors: 75Ω BNC
Standard: AES-3id-1995 and SMPTE 276M
Return loss: >25 dB (0.1 to 6 MHz)
Intrinsic jitter: <6 ns
PerformanceSample rates: 32, 44.1, or 48 kHz
Delayed outputs: •Minimum: 1.2 ms•Maximum:510ms(127.5AESblocks)
Delay increments: One AES block (2 ms)
Indicators and ControlsIndicators: Input video present, input data rate, power
Controls: Delay – two 16-position rotary switches
8914 Dual AES/EBU Digital Audio Delay Distribution Amplifier
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8914Dual AES/EBU digital audio delay distribution amplifier
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
AES 1
AES/EBU
Loopthrough
Controller
Remote
LEDs
AESTX
AESRX
Processor
Delay
Fixed DelayControls
Ancillary Data
Variable Delay(from frame sync
RS-232 data)
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900V-R
Loopthru
AES/EBUInput
Delay FromFrame Sync
AES/EBUOutputs
AES/EBUOutputs
10
Key FeaturesUp to 1/2 second delay in 2 ms •increments
Auto-tracks frame sync delays (8900FSS, •8981FS)
Seven outputs•
Remote control via Ethernet frame I/F•
The 8916 delays digital audio to adjust for lip sync errors. Lip sync specifications are usually expressed as +1/-2 video frames of audio leading/lagging video. Because human perception tolerates audio lagging better than audio leading video, the specification is looser for audio lag. The 8916 offers tremendous flexibility with two forms of delay that are summed—a fixed delay of up to 0.5 seconds and a variable delay based on the signal input from one of our video frame synchronizers. Key applications include adjusting for a large fixed lip sync error while continuously adjusting audio delay to match video delay created from a video frame sync.
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating3.5 Watts – single slot
InputsStandard: AES-3id-1995 and SMPTE 276M
Connector: BNC differential loopthrough
Return loss: >25 dB (0.1 to 6 MHz) transformer coupling on input eliminates common mode noise
OutputsStandard: AES-3id-1995 and SMPTE 276M
Number of outputs: Seven
Connector: 75Ω BNC
Return loss: >25 dB (0.1 to 6 MHz)
Intrinsic jitter: <6 ns
PerformanceSample rates: 32 kHz, 44.1 kHz, 48 kHz
Delayed outputs: •Minimum:3ms@32kHz,[email protected]
48 kHz•Maximum:510ms
Delay increments: 2 ms
Operating temperature: 0° to 45°C
Humidity range: 0% to 90% non-condensing
Indicators and ControlsIndicators: Input signal present, input data rate, fault, tracking, power, communication active
Controls: Output delay
Remote: All indicators and controls via frame Ethernet
8916 AES/EBU Autotracking Digital Audio Delay DA
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8916AES/EBU autotracking digital audio delay distribution amplifier
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900V-R
LeftAnalog
Input
AES/EBUOutputs
AES/EBUOutputs
AES Reference
Loopthru
RightAnalogInput
Mode Controls
Remote
LEDs
FilterAnalog 1
(using the supplied balanced 8900CTB-04 audio adapter)
Analog 2 Filter
Controller
FPGA24-bitStereoADC
AES/EBU
AESTX
+
+
11
The 8920ADC converts analog audio to digital audio. Its various modes allow you to modify the outgoing signal such as channel swapping, channel summing, phase inversion, and more. The remote capability supports mode selection and input gain control.
Key Features24-bit resolution•
Wide range of output modes (swap, invert, •sum, tones)
AES/EBU loopthrough reference input•
48 kHz sampling rate•
Terminal block input via adapter for •balanced analog audio input
Independent input level control from •+12 dBu to +28 dBu
Remote control via Ethernet frame I/F•
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating4.2 Watts – single slot
Analog Input SignalNumber of inputs: Single stereo pair
Connector type: Terminal block 8900CTB-04
Input impedance: >10 kΩ
Input level: +12 to +28 dBu
Sampling rate: 48 kHz
AES Reference InputSignal type: AES-3id transformer coupled (does not support word clock or video)
Number of inputs: One loop-through
Input return loss: >15 dB (100 kHz to 10 MHz)
Maximum jitter: <200 ps RMS
OutputNumber of outputs: Four
Signal type: AES-3id-1992
Connector type: 75Ω BNC
PerformanceSampling rate: 48 kHz
Signal/noise ratio: >102 dB unweighted, >105 dB “A” weighted
Frequency response: ±0.05 dB 20 Hz to 20 kHz
Interchannel crosstalk: <–100 dB, 20 Hz to 20 kHz
Operating temperature: 0° to 45°C
Humidity range: 0% to 90% non-condensing
Indicators and ControlsIndicators: Input present, ref. present, power, clipping, fault, communication active
Controls: Operation modes (normal, channel swap, phase invert, channel sum, tone), input gain
Remote: All controls and indicators via Ethernet
8920ADC Audio A-to-D Converter
8900CTB-04 connects here for balanced analog inputs
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8920ADCAudio A-to-D converter supplied with one 8900CTB-04 adapter
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
8900CTB-04 connects here for balanced analog inputs
Ω
Ω
Delay Control I/F
LoopthroughReference Input AES or Video
LEDs
FilterAnalog 1
Analog 2 Filter Delay
Controller
FPGA
Remote
Buffered
RS-232
24-bitStereoADC
Dual 75
Single 110
AESTX
+
+
8900CTB-02 connects here for 110Ω output
12
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900V-R
LeftAnalog
Input
DelayControl
Input
DelayControlOutput
AES/EBUOutputs
Reference Input
Reference Input
Loopthru
RightAnalogInput
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating6 Watts – single slot
Analog Input SignalNumber of inputs: Stereo pair
Connector type: Terminal block 8900CTB-04
Input impedance: >22 kΩ
Input level: +0 to +30 dBu
Sampling rate: 48 kHz
AES Reference InputSignal type: Composite video, AES-3id-1992, word clock (48 kHz sample rate)
Number of inputs: One loop-through
Input return loss: >90 dB at 50/60 Hz, >45 dB to 20 kHz
OutputSignal type: AES-3id-1992 (75Ω), AES3 (110Ω)
Number of channels: Dual 75Ω outputs, single 110Ω output
Connectors: BNC (75Ω) terminal block adapter (110Ω)
PerformanceSignal/noise ratio: •>102dB,20Hzto20kHz•>105dB“A”weighted
THD+noise, 20 Hz to 20 kHz: <0.005%, 20 Hz to 20 kHz, +24 dBu
Interchannel crosstalk: <–95 dB, 20 Hz to 20 kHz
Frequency response: ±0.05 dB relative to 1 kHz, 20 Hz to 20 kHz
Delay: Maximum: 1365 ms
Delay increments: 2 ms
Operating temperature: 0° to 45°C
Humidity range: 0% to 90% non-condensing
Indicators and ControlsIndicators: Tracking, level, remote override, power, communications active, CH1 and CH2 >–20 dBFS, CH1 and CH2 >–0.5 dBFS, clip level, internal fault, ref. locked, remote lock out
Controls: Level, delay
Remote: All controls and indicators via Ethernet
The 8920ADT takes the best features of our 8920ADC and 8916, and incorporates them into one cost-effective, space-saving module. It provides conversion of analog audio to digital audio with the capability to simultaneously adjust for lip sync errors. It offers two forms of delay that are summed—a fixed delay of up to 1.365 seconds and a variable delay based on a signal from one of our video frame synchronizers, enabling you to adjust for a large, fixed lip sync error while continuously adjusting audio delay to match the video delay created by the frame sync. The 8920ADT also provides various modes of controlling the output audio signal such as channel swapping, channel summing, and phase inversion.
Key Features24-bit resolution•
75Ω or 110Ω output•
Wide range of output modes (swap, invert, •sum, tones)
Loop-through reference input (video, •AES-3id, AES word clock)
48 kHz sampling rate•
Terminal block input via adapter •8900CTB-04
Up to 1.365 second delay in 2 ms •increments
Auto-tracks frame sync delays •(8900FSS, 8981FS, RS-232 serial data)
Remote control via Ethernet frame •interface
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8920ADTAudio A-to-D converter with autotracking delay 75Ω unbalanced outputs
8920ADT-110Audio A-to-D converter with auto-tracking delay 110Ω balanced output supplied with one each 8900CTB-04 and 8900CTB-02
8920ADT Audio A-to-D Converter with Autotracking Delay
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
Analog 1
ModeControls
24-bitStereoDAC
ControllerLEDs
Filter
Remote
+
–
Analog 2+
–Filter
FPGAAESRX
Gain
Gain
75Ω AES/EBULoopthrough
L
R
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900V-R
AnalogAudio
Outputs
Not Used
Not Used
Not Used
Loopthru
Not Used
AES/EBUInput
AnalogAudioOutputs
8900CTB-04 Terminal Block to BNC Adapter
13
The 8920DAC is an easy-to-use digital audio to analog audio converter. Its various modes allow you to modify the outgoing signal, such as channel swapping, channel summing, phase inversion, and more. The remote capability supports mode selection and input monitoring. Typical applications include interfacing between digital and analog equipment, such as speakers, audio mixers, and routers.
Key FeaturesAES/EBU differential loop-through input•
20- or 24-bit modes•
Wide range of output modes (swap, invert, •sum, tones, silence)
32 to 48 kHz sampling rate with indicators at •32, 44.1, and 48 kHz
Terminal block output via adapter •8900CTB-04
Independent output level control from •+14 dBu to +24 dBu
>110 dB “A weighted” signal-to-noise •ratio
Housed in the same frame with other •8900-V audio and video modules
Remote control via Ethernet frame •interface
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating3.1 Watts – single slot
InputType: AES-3id-1992 – unbalanced
Number of inputs: One differential loop-through
Connector: 75Ω BNC
Common mode range: ±12 V pk DC –20 kHz
Input signal level range: 200 mV to 12 Vp-p
Sampling rates: Any rate from 32 to 48 kHz with indicators at 32, 44.1, and 48 kHz
Input return loss: >15 dB (100 kHz to 10 MHz)
Maximum jitter: <200 ps RMS
OutputNumber of outputs: One stereo pair
Output level: +14 to +24 dBu max
Output impedance: 50Ω single-ended, 100Ω differential
Connector type: Terminal block through 8900CTB-04 BNC adapter board
PerformanceSignal/noise ratio: •>107dBunweighted22kHzfilter•>110dB“A”weighted
Frequency response: ±0.1 dB 20 Hz – 20 kHz @ 48 kHz sampling
THD + noise: <0.004% @ 24 dBu
Quantization: 20- or 24-bit
Interchannel crosstalk: <–100 dB, 20 Hz to 20 kHz
DC offset: <±50 mV
Operating temperature: 0° to 45°C
Humidity: 10% to 90% non-condensing
Non-operating temperature: –10° to 70°C
Indicators and ControlsIndicators: Input data rates, power, de-emphasis, fault, remote override communication active, configuration
Controls: Operation modes (normal, channel swap, phase invert, channel sum, tone), output gain
Remote: All Indicators and controls via frame Ethernet except gain
8920DAC Audio D-to-A Converter
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8920DACAudio D-to-A converter supplied with one 8900CTB-04 adapter
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
VideoOutput
(75/110Ω)AES 1 Output
VideoInput
(75/110Ω)AES 2 Output
(75/110Ω)AES 1 Output
(75/110Ω)AES 2 Output
VideoOutput
Loopthru
8900V-R
DEMUX
Micro-processor
Ethernet
AES/EBU
LEDs
AES/EBU
SDIw/Embedded
Audio
AES TX
AES TX
Delay
Delay
ReclockerSDIw/EmbeddedAudio
Dual 75Ω
Single 110Ω
Dual 75Ω
Single 110Ω
8900CTB-04 110Ω input adapter
14
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8920DMXAudio/video demultiplexer, 75Ω
8920DMX-110Audio/video demultiplexer, 110Ω
8900CTB-04BNC to terminal block adapter to convert 8920DMX to 8920DMX-110
Key FeaturesExtracts up to two AES/EBU streams•
Supports 48 kHz audio•
EDH detection•
75Ω unbalanced or 110Ω balanced digital •audio outputs
Supports networked control and •monitoring
This companion to the 8920MUX simplifies the management of multichannel audio by extracting up to two 48 kHz AES audio streams (up to four discrete channels) from one of the eight available AES groups in the ancillary data space of embedded 525 or 625 serial digital component video. The 8920DMX recognizes and preserves the ID and channel status of the 20- or 24-bit AES group and can delete groups assigned for extraction or pass them through to another demultiplexer. The two AES/EBU outputs can be either 75Ω unbalanced or 110Ω balanced to accommodate a variety of digital audio processing equipment.
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating7 Watts – single slot
Video InputSignal type: SMPTE 259M, EBU 3267-E
Connector: Differential loop-through BNC
Impedance: High Z
Return loss: >15 dB up to 270 MHz
Cable equalization: <300 meters
Audio OutputSignal type: AES-3id-1995 (75Ω), AES3 (110Ω)
Number of channels: Four (two streams)
Connectors: BNC (75Ω), terminal block adapter (110Ω)
Sample rate: 48 kHz
Resolution: 20- or 24-bit
Video OutputSignal type: SMPTE 259M
Connector: Four 75Ω or two 110Ω via 8900CBT-04
Return loss: >15 dB, 5 to 270 MHz
Error checking: EDH embedded
PerformanceOperating temperature: 0° to 45°C
Humidity: 10% to 90% non-condensing
Indicators and ControlsIndicators: Video present, audio present, fault, power, communication active, configuration, remote override
Controls: Audio group selection
Remote: All indicators and controls via Ethernet
8920DMX Video/Audio Demultiplexer (De-embedder)
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Output
(75/110)75Ω AES 1
SDI VideoInput
Output
110Ω
(75/110)75Ω AES 2
110Ω
8900V-R
Loopthru
Local Controls
MUX
Micro-processor LEDs
Ethernet
SDIw/Audio
AES/EBU 2
AES/EBU 1
SDIw/Audio
(75Ω or 110Ω)AES RX Delay
AES RX Delay
15
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8920MUXVideo/audio multiplexer, 75Ω
8920MUX-110Video/audio multiplexer, 110Ω
8900CTB-04BNC to terminal block adapter to convert 8920MUX to 8920MUX-110
As serial digital video signals become more prevalent in production facilities, the demand for multi-channel audio increases. The 8920MUX provides a cost-effective solution for inserting or replacing one of the eight available groups of dual AES streams in a multiplexed serial digital video signal with embedded AES/EBU audio. The 8920MUX can multiplex up to two dual-channel, 20- or 24-bit AES/EBU audio streams (up to four discrete channels). The 20- or 24-bit AES streams are grouped together and given a unique group ID. This AES group is then inserted into the ancillary data space of the 525 or 625 serial digital component video signal. The 8920MUX is able to add a new AES group into empty ancillary data space, or it can replace an existing AES group—without disturbing the remaining AES groups. Digital audio inputs can be either 75Ω unbalanced or 110Ω balanced.
Key FeaturesEmbeds two AES/EBU streams•
Existing audio remains undisturbed•
Accepts 48 kHz audio •
EDH detection and insertion•
75Ω unbalanced or 110Ω balanced audio •inputs
Supports networked control and •monitoring
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating7 Watts – single slot
Video InputSignal type: SMPTE 259M, EBU 3267-E
Connector: Differential loop-through BNC
Impedance: High Z
Return loss: >15 dB up to 270 MHz
Cable equalization: <300 meters
Audio InputSignal type: AES-3id-1995 (75Ω), AES3 (110Ω)
Number of channels: Four (two AES streams)
Connectors: BNC (75Ω), 8900CTB-04 terminal block adapter (110Ω)
Sample rate: 48 kHz
Resolution: 20- or 24-bit
OutputSignal type: SMPTE 259M, EBU 3267-E
Connector: Four 75Ω BNC
Return loss: >15 dB, 5 to 270 MHz
Error checking: EDH embedded
PerformanceOperating temperature: 0° to 45°C
Humidity: 10% to 90% non-condensing
Indicators and ControlsIndicators: Video present, audio present, group present, fault, power, communication active, configuration, remote override
Controls: Audio group selection
Remote: All indicators and controls via Ethernet
8920MUX Video/Audio Multiplexer (Embedder)
8900CTB-04 110Ω input adapter
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
J1
J2J3
J4
J5
J7
J9
J11
J13
J12
J14
J6
J8
AES 1-1
AES 1-2
AES 1-3
Pin 3
Pin 3Pin 2 Pin 2
Pin 1
Pin 1
Audio In 1 Audio In 2
Audio In 4Audio In 3
Loopthru
Looping Reference Input
Tracking Input(J5 to pins 2-3)
or AES 1 Out(J5 to pins 1-2)
Tracking Output(J6 to pins 2-3)
or AES 2 Out(J6 to pins 1-2)
AES 2-1
AES 2-2
AES 2-3
G_
+8900A-R
+_
G
SumSwapInvertEtc.
A-to-DConversion
Gain,Delay
and Pairing
Audio Processing
ReferenceInput
Unbalanced AES 1/Tracking Input
Unbalanced AES 2/Tracking Input
Balanced AES 2
Balanced AES 1
LEDsEthernet
Audio Input 1
Audio Input 2
Audio Input 3
Audio Input 4
Specifications Ordering Information
16
This module can be mounted in a GeckoFlex frame when ordered with the 8900A-R GeckoFlex Audio Rear module.
8921ADTFour-channel audio analog-to-digital converter with delay tracking
8900-A-CBL (Gecko Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on modules in a Gecko frame
8900-GFA-CBL (GeckoFlex Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on 8900A-R modules in a GeckoFlex frame
Key FeaturesUser-selectable 48 kHz or 96 kHz sampling •rates
24-bit ADC A-to-D conversion•
>105 dB “A” weighted signal-to-noise •ratio
Independent control of each audio •channel including channel pairing, level adjustment, swapping, summation, phase inversion, delay up to 1.5 seconds, test tone generation
Auto tracking delay of video frame •synchronizers (8900FSS, 8981FS)
Four inputs, two pairs of balanced High Z •analog audio inputs:— Supports levels up to +30 dBu
Looping reference input supports NTSC/•PAL color black, AES signal, 48 kHz or 96 kHz DARS
Options:•— 8900-A-CBL package of four cables,
breakout cable package converts three-pin balanced AES audio to dual 75Ω BNCs, unbalanced AES audio
— 8900-GFA-CBL package of four cables, breakout cable package for GeckoFlex 8900A-R rear module with three-terminal to dual BNCs converts balanced AES audio to dual 75Ω, unbalanced AES audio
The 8921ADT provides conversion of four channels of analog audio to two digital audio streams. In addition to conversion, it offers two forms of delay. These delays are summed—a fixed delay of up to 1.5 seconds and a variable delay based on a signal from video decoders fitted with frame synchronizers or directly from a frame sync card, enabling adjustment for large, fixed lip sync errors while continually adjusting audio delay to match video delay created by the frame synchronizer. Operational modes allow modification to the outgoing signal, such as levels, channel swapping, channel summing, and phase inversion plus channel pairing for the digital audio streams. Many adjustments to this card can be performed directly on the module card-edge controls, while a few of the more complex adjustments require the Web-based interface or the Newton control panel.
Supported Frame TypesGeckoFlex with 8900A-R GeckoFlex Audio rear module, Gecko audio frames: 8900TX-A, 8900TF-A, 8900TFN-A
Power Rating4.7 Watts – single slot
Analog InputsNumber of inputs: Four balanced
Impedance: >22 kΩ
Common mode input voltage: 20V maximum
Connector: Three-pin mini-terminal strip
Reference InputNumber of inputs: One differential loop-through
Impedance: High Z loop-through
Input return loss: >40 dB 100 kHz to 10 MHz @ 75Ω
Common mode input voltage: ±1V maximum
Digital OutputsNumber of outputs: Three balanced and one unbalanced per channel
Signal type:•Balanced:AES-3id-1992•Unbalanced:AES-3id-2001
Output voltage level: •Balanced:3Vp-p±0.2V@110Ω•Unbalanced:1Vp-p±0.2V@75Ω
Output impedance: •Balanced:110Ω•Unbalanced:75Ω
Connector type: Three-pin mini-terminal strip
Sample rate: 48 kHz or 96 kHz jumper selectable
8921ADT Four-Channel Audio A-to-D Converter w/Delay Tracking
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J1
J2J3
J4
J5
J7
J9
J11
J13
J12
J14
J6
J8
Pin 3Pin 2Pin 1
Pin 1Pin 2Pin 3
AES 1 A/B In
Analog Audio Out 1
Analog Audio Out 2Analog Audio Out 4
Analog Audio Out 3
AES 1 A/B In
AES Out 1 AES Out 3
AES Out 4AES Out 2
AES 2 C/D In
AES 2 C/D In
Not UsedNot Used
8900A-R+_
G
G_
+
Ethernet Control via frame bus
Microprocessor LEDs
AES 1AES 2
AES 3AES 4
LocalControl
AESInput 2
AESInput 1
Unbalanced
Unbalanced
Balanced
Balanced
BalancedAnalog Audio 1&2
BalancedAnalog Audio 3&4
SumSwapInvertEtc.
Audio Processing
D-to-A Convertion
SampleRate
Converter
4x4 Router
Delayand Gain
D-to-A Convertion
From AES Input 1
From AES Input 2
AES Distributed Outputs
17
This module can be mounted in a GeckoFlex frame when ordered with the 8900A-R GeckoFlex Audio Rear module.
8921DACFour-channel audio digital-to-analog converter with delay
8900-A-CBL (Gecko Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on modules in a Gecko frame
8900-GFA-CBL (GeckoFlex Frames only)Package of four three-terminal to dual BNC cables, used for unbalanced outputs on 8900A-R modules in a GeckoFlex frame
The 8921DAC provides conversion of two digital audio streams, either balanced or unbalanced, to four analog audio outputs. In addition to digital to analog conversion, it offers per-channel independent delay with up to 5 seconds per channel. Its various modes enable modification of the outgoing analog signal, such as channel gain, swapping, channel summing, phase inversion, and more. Many adjustments to this card can be performed directly on the module’s card-edge controls while a few of the more complex adjustments require the Web-based interface or the Newton control panel.
Key FeaturesTwo 32-96 kHz AES/EBU digital audio •inputs, either balanced or unbalanced
24-bit D-to-A conversion•
Four balanced analog audio outputs •0 dBFS supports up to +24 dBu
Four buffered digital balanced outputs•
Independent control of each audio:•— Channel including— Channel pairing— Level adjustments— Phase inversion— Delay of up to 5 seconds— Tone generation
Card-edge control and status indicators•
Supported Frame TypesGeckoFlex with 8900A-R GeckoFlex Audio rear module, Gecko audio frames: 8900TX-A, 8900TF-A, 8900TFN-A
Power Rating8 Watts – single slot
Digital InputDigital audio input signal: •Balanced:AES-3id-1992•Unbalanced:AES-3id-1995
Number of inputs: Two balanced or unbalanced
Connector type: •Balanced:mini-screwterminalblock•Unbalanced:BNC
Common mode range: •Balanced:20Vp-pDC–20kHz•Unbalanced:N/A
Sampling rate:Inputsamplingrate32to96kHzandoutputsamplingrate48kHz
Input return loss:>25dB(100kHzto10MHz)
Input impedance: •Balanced:110Ω•Unbalanced:75Ω
Analog OutputNumber of outputs: Four channels, single output each channel
Output impedance:5Ωsingle-endedand10Ωdifferential
Connector type: Mini-screw terminal block
PerformanceSignal/noise ratio:>104dBunweighted22kHzfilter,>107dB“A”weighted
THD + noise swept, 20 Hz to 20 kHz: >0.01% 22kHzfilter,+24dBu(≥–80dB)
Interchannel crosstalk:<–100dB20Hzto20kHz
Frequency response: ±0.1dB20Hzto20kHzwrt1kHz@48kHz
OtherOperating temperature range: 0° to 45°C
Non-operating temperature range:–10°to+70°C
Humidity: 10% to 90% non-condensing
8921DAC Four-Channel Audio D-to-A Converter w/Delay
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
18 8925DMB-B SD/HD Balanced Audio De-Embedder
Key FeaturesEight-channel SD/HD audio de-embedder •(demultiplexer) with AES outputs
Any embedded audio stream can be •passed and distributed to any discrete output
Choice of four balanced AES outputs •
Four HD-SDI/SDI outputs (one active loop-•through)
Support 48 kHz audio sample rate and •20-bit or 24-bit audio sample resolution
Handles Dolby E •
Fiber-ready option for receiving or •transmitting over fiber
Remote control and monitoring via •Ethernet frame interface
ApplicationsHD-SDI audio de-embedding •
SD and HD signal handling•
Receiving SD/HD SDI from fiber and •de-embedded audio
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating7.4 Watts – single slot
Video InputsSD/HD-SDI:•Inputequalization:HDupto125m,SDupto330m•Auto-sensing:yes
Optical: Single-mode (optional)
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94, 576i @ 50, [email protected], 1080sF @ 23.98
Audio OutputsAES: Four outputs•Signaltype–balanced:AES-3id-1992•Commonmoderange:10Vp-pDC20kHz•Samplingrate:48kHz•Resolution:20-or24-bit•Outputreturnloss:>15dB(100kHzto12MHz)•Inputimpedance–balanced:110Ω•Connectortype–balanced:mini-screwterminal
block
Video OutputsSD/HD-SDI: Four outputs•Returnloss:>15dB,5to270MHz;
>15 dB typical, to 1.5 GHz•Signallevel:SDI800mV/p±10%•Rise/falltime(20-80%):140pstypicalforHD,
640 ps typical for SD Output jitter, low jitter applied:•
< 0.2 UI HD > 100 kHz < 1.0 UI HD 10 Hz > 100 kHz < 0.2 UI SD > 1 kHz < 0.2 UI SD 10 Hz > 1 kHz
Optical: Single-mode (optional)
Electrical length (delay)SDI: HD input <400 ns, SD input <1.2 µs
AES (@48 kHz): HD input 0.41 ms, SD input 0.83 ms
De-embeddingOutput audio stream: Silence or any embedded pair
Output audio resolution: 20-, 24-bit, or auto as input
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames. As this module has no card-edge controls, an 8900NET (Net Card) Network Interface module is required for configuration.
8925DMB-BSD/HD de-embedder, four balanced audio inputs, front and rear module set
SFP-13103G-M1TRXFiber transceiver. Low-power 1310 nm single-mode optical transceiver
SFP-13103G-M1DTXDual fiber transmitter. Dual low-power 1310 nm single-mode optical transmitter
SFP-13103G-M1DRXDual fiber receiver. Dual low-power 1310 nm single-mode optical receiver
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
The 8925DMB-B is a compact SD/HD digital audio de-embedder (audio demultiplexer) module. It provides four balanced AES outputs and supports both PCM audio and Dolby E. This module is ideal for building dense audio/video infrastructure for production and playout applications. The 8925DMB-B provides four SD/HD-SDI outputs, one of which is a direct reclocked feed of the input. The four AES outputs are synchronous to the video. Output PCM audio sample resolution can be forced to 20 or 24 bits.
With its fiber-ready architecture, the 8925DMB-B can be configured to support up to two fiber inputs or up to two fiber outputs. Configured as a fiber transceiver it can take SDI from fiber, de-embed audio, and provide SDI output over fiber and discrete AES outputs. The dual-receiver option makes it ideal for receiving incoming feeds from longer distances with fiber input selection, and locally de-embedding audio for providing audio and SDI over copper.
All parameters can be adjusted via standard HTML Web browsers or via the Newton Control. In addition, NetConfig and NetCentral can be used for remote configuration and signal health monitoring.
4XAESOut
3X SD/HDSDI Out
SD/HDReclockedSDI Out
SD/HDSDI In
Equalizer andReclocker
Only one fiberoption may be
selected
Fiber TX
Fiber TX
Fiber TX
Fiber RX
Fiber RX
Fiber RX
SD/HDOptical In
2X SD/HDOptical In
SD/HDOptical Out
2X SD/HDOptical Out
Option Option
Option
DMUX
8900BVF-R
SD/HDSDI Out
SD/HDSDI Out
ReclockedOutput
SD/HDSDI In
SD/HDSDI Out
SD/HDSDI Out
Fiber In/OutConnector
AudioOutputAudio
Output
AudioOutputAudioOutput
Pin 3Pin 2Pin 1
Pin 1Pin 2Pin 3
+_
G
G_
+J5 J6
J7 J8
J9
FIBER
J1J2
J3J4
Specifications Ordering Information
198925DMB-U SD/HD Unbalanced Audio De-Embedder
Key FeaturesEight-channel SD/HD audio de-embedder •(demultiplexer) with AES outputs
Any embedded audio stream can be •passed and distributed to any discrete output
Choice of four unbalanced AES outputs •
Four HD-SDI/SDI outputs (one active loop-•through)
Support 48 kHz audio sample rate and •20-bit or 24-bit audio sample resolution
Handles Dolby E •
Fiber-ready option for receiving or •transmitting over fiber
Remote control and monitoring via •Ethernet frame interface
ApplicationsHD-SDI audio de-embedding •
SD and HD signal handling•
Receiving SD/HD-SDI from fiber and •de-embedded audio
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating7.4 Watts – single slot
Video InputsSD/HD-SDI:•Inputequalization:HDupto125m,SDupto330m•Auto-sensing:yes
Optical: Single-mode (optional)
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94, 576i @ 50, 1080p @ 23.98, 1080sF @ 23.98
Audio OutputsAES: Four outputs
Signal type – unbalanced: AES-3id-2001•Common mode range: N/A•Sampling rate: 48 kHz•Resolution: 20- or 24-bit•Output return loss: >15 dB (100 kHz to 12 MHz)•Inputimpedance:75Ω•Connector type: BNC•
Video OutputsSD/HD-SDI: Four outputs•Returnloss:>15dB,5to270MHz;
>15 dB typical, to 1.5 GHz•Signallevel:SDI800mVp-p±10%•Rise/falltime(20-80%):140pstypicalforHD,
640 ps typical for SD Output jitter, low jitter applied:•
< 0.2 UI HD > 100 kHz < 1.0 UI HD 10 Hz > 100 kHz < 0.2 UI SD > 1 kHz < 0.2 UI SD 10 Hz > 1 kHz
Optical: Single-mode (optional)
Electrical Length (delay)SDI: HD input <400 ns, SD input <1.2 µs
AES (@48 kHz): HD input 0.41 ms, SD input 0.83 ms
De-EmbeddingOutput audio stream: Silence or any embedded pair
Output audio resolution: 20-, 24-bit, or auto as input
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames. As this module has no card-edge controls, an 8900NET (Net Card) Network Interface card is required to configure this module.
8925DMB-USD/HD de-embedder, front and rear modules, four unbalanced audio inputs, front and rear module set
SFP-13103G-M1TRXFiber transceiver. Low-power 1310 nm single-mode optical transceiver
SFP-13103G-M1DTXDual fiber transmitter. Dual low-power 1310 nm single-mode optical transmitter
SFP-13103G-M1DRXDual fiber receiver. Dual low-power 1310 nm single-mode optical receiver
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
The 8925DMB-U is a compact SD/HD digital audio de-embedder (audio demultiplexer) module. It provides four unbalanced AES outputs and supports both PCM audio and Dolby E. This module is ideal for building dense audio/video infrastructure for production and playout applications.
The 8925DMB-U also provides four SD/HD-SDI outputs, one of which is a direct reclocked feed of the input. The four AES outputs are synchronous to the video. Output PCM audio sample resolution can be forced to 20 or 24 bits.
With its fiber-ready architecture, the 8925DMB-U can be configured to support up to two fiber inputs or up to two fiber outputs. Configured as a fiber transceiver it can take SDI from fiber, de-embed audio, and provides SDI output over fiber and discrete AES outputs. The dual-receiver option makes it ideal for receiving incoming feeds from longer distances with fiber input selection, and locally de-embedding audio for providing audio and SDI over copper.
8900UVF-RJ1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
AudioOutput
AudioOutput
SD/HDSDI Out
SD/HDSDI Out
ReclockedOutput
SD/HDSDI In
AudioOutput
AudioOutput
SD/HDSDI Out
SD/HDSDI Out
Fiber In/OutConnector
All parameters can be adjusted via standard HTML Web browsers or via the Newton Control. In addition, NetConfig and NetCentral can be used for remote configuration and SNMP signal health monitoring.
4XAESOut
3X SD/HDSDI Out
SD/HDReclockedSDI Out
SD/HDSDI In
Equalizer andReclocker
Only one fiberoption may be
selected
Fiber TX
Fiber TX
Fiber TX
Fiber RX
Fiber RX
Fiber RX
SD/HDOptical In
2X SD/HDOptical In
SD/HDOptical Out
2X SD/HDOptical Out
Option Option
Option
DMUX
Specifications Ordering Information
20 8925EMB-B SD/HD Balanced Audio Embedder
Key FeaturesEight-channel (four stream) SD/HD digital •audio embedder (multiplexer)
Four balanced AES inputs•
Accepts asynchronous PCM audio•
Supports Dolby E•
Three SD/HD SDI outputs with embedded •audio
Sample rate conversion accepts 32 kHz, •44.1 kHz, 48 kHz, or 96 kHz
Embeds 20 or 24 bits•
Fiber-ready option for receiving or •transmitting over fiber
ApplicationsEmbedding audio into an HD-SDI stream•
Embedding asynchronous PCM digital •audio
Embedding audio channels and sending •an HD-SDI signal over fiber
Suitable for use where existing embedded •audio needs to be combined with incoming embedded audio
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating7.7 Watts – single slot
Video InputsSD/HD-SDI:•Inputequalization:HDupto125m,SDupto330m•Auto-sensing:yes
Optical: Single-mode (optional)
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94, 576i @ 50, 1080p @ 23.98, 1080sF @ 23.98
Audio InputsAES: Four inputs•Signaltype:balanced:AES-3id-1992•Commonmoderange:10Vp-pDC20kHz•Samplingrate:32,44.1,48,or96kHz•Resolution:20or24bits•Inputreturnloss:>–25dB(100kHzto12MHz)•Inputimpedance:110Ω•Connectortype:mini-screwterminalblock
Video OutputsSD/HD-SDI: Four outputs•Returnloss:>15dB,5to270MHz;>15dBtypical,
to 1.5 GHz
•Signallevel:SDI800mVp-p±10%•Rise/falltime(20-80%):140pstypical.forHD,
640 ps typical for SD Output jitter, low jitter applied:•
< 0.2 UI HD > 100 kHz < 1.0 UI HD 10 Hz > 100 kHz < 0.2 UI SD > 1 kHz < 0.2 UI SD 10 Hz > 1 kHz
Optical: Single-mode (optional)
Electrical Length (delay)Minimum SDI Video Delay Mode: HD input: <19 µs, SD input: <13 µsMinimum SDI Audio/Video Offset Mode: HD input: <84 µs, SD input: <525 µsPCM Audio with SRC (at 48 kHz): HD input: 3.04 ms, SD input: 3.45 msNon-PCM audio or PCM with SRC off: HD input: 0.15 ms, SD input: 0.56 ms
Minimum Audio/Video Output Offset: SD: 40 µs, HD: 62 µs
EmbeddingDelete individual embedding audio group: Yes/no
Embedded audio stream: Silence, any incoming group, or any audio input
Output audio resolution: 20-, 24-bit, or auto as input
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames. As this module has no card-edge controls, a network interface card is required to configure this module.
8925EMB-BSD/HD embedder, front and rear, four balanced audio inputs, front and rear module set
SFP-13103G-M1TRXFiber transceiver. Low-power 1310 nm single-mode optical transceiver
SFP-13103G-M1DTXDual fiber transmitter. Dual low-power 1310 nm single-mode optical transmitter
SFP-13103G-M1DRXDual fiber receiver. Dual low-power 1310 nm single-mode optical receiver
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
The 8925EMB-B is a compact eight-channel SD/HD digital audio embedder (multiplexer) module. It provides three distributed SDI outputs with embedded audio and one output acting as an input reclocked loop-through. The module is ideal for building dense SD/HD and audio infrastructure for production and playout applications.
The module automatically detects the audio format, and Dolby E streams are also detected and passed transparently. The AES inputs can handle asynchronous audio and sampling rates from 32 kHz to 96 kHz, which are converted to synchronous 48 kHz embedded within the video stream.
With its fiber-ready architecture, the 8925EMB-B can be configured to support up to two fiber inputs and two fiber outputs. With the fiber transmitter or transceiver option, it can take video from copper or fiber, embed audio, and transmit over fiber in one single slot. The receiver option makes it ideal for receiving incoming feeds from longer distances and locally embedding audio.
All parameters can be adjusted via standard HTML Web browsers or via the Newton Control Panel. In addition NetConfig and NetCentral can be used for remote configuration and SNMP signal health monitoring.
Bypass
Bypass
Sample RateConverter
3X SD/HDSDI Out
SD/HDReclockedSDI Out
SD/HDSDI In
Equalizer andReclocker
DelayBlock
Only one fiberoption may be
selected
Fiber TX
Fiber TX
Fiber TX
Fiber RX
Fiber RX
Fiber RX
SD/HDOptical In
2X SD/HDOptical In
SD/HDOptical Out
2X SD/HDOptical Out
Option Option
Option
MUX4XAES
In
8900BVF-R
J5 J6
J7 J8
J9
FIBER
J1J2
J3J4
SD/HDSDI Out
SD/HDSDI Out
ReclockedOutput
SD/HDSDI In
SD/HDSDI Out
SD/HDSDI Out
Fiber In/OutConnector
AudioInput
AudioInput
AudioInputAudioInput
Pin 3Pin 2Pin 1
Pin 1Pin 2Pin 3
+_
G
G_
+
Specifications Ordering Information
218925EMB-U SD/HD Unbalanced Audio Embedder
Key FeaturesEight-channel (four stream) SD/HD digital •audio embedder (multiplexer)
Four unbalanced AES inputs•
Accepts asynchronous PCM audio•
Supports Dolby E•
Three SD/HD SDI outputs with embedded •audio
Sample rate conversion accepts 32 kHz, •44.1 kHz, 48 kHz, or 96 kHz
Embeds 20 or 24 bits•
Fiber-ready option for receiving or •transmitting over fiber
ApplicationsEmbedding audio into an HD-SDI stream•
Embedding asynchronous PCM digital •audio
Embedding audio channels and sending •an HD-SDI signal over fiber
Suitable for use where existing embedded •audio needs to be combined with incoming embedded audio
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating7.7 Watts – single slot
Video InputsSD/HD-SDI:•Inputequalization:HDupto125m,SDupto330m•Auto-sensing:yes
Optical: Single-mode (optional)
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94, 576i @ 50, 1080p @ 23.98, 1080sF @ 23.98
Audio InputsAES: Four inputs•Signaltype–unbalanced:AES-3id-2001•Commonmoderange:N/A•Samplingrate:32,44.1,48,or96kHz•Resolution:20-or24-bit•Inputreturnloss:>–25dB(100kHzto12MHz)•Inputimpedance:75Ω•Connectortype:BNC
Video OutputsSD/HD-SDI: Four outputs•Returnloss:>15dB,5to270MHz;>15dBtypical,
to 1.5 GHz
•Signallevel:SDI800mVp-p±10%•Rise/falltime(20-80%):140pstypicalforHD,
640 ps typical for SD Output jitter, low jitter applied:•
< 0.2 UI HD > 100 kHz < 1.0 UI HD 10 Hz > 100 kHz < 0.2 UI SD > 1 kHz < 0.2 UI SD 10 Hz > 1 kHz
Optical: Single-mode (optional)
Electrical Length (delay)Minimum SDI Video Delay Mode: HD input: <19 µs, SD input: <13 µsMinimum SDI Audio/Video Offset Mode: HD input: <84 µs, SD input: <525 µsPCM Audio with SRC (at 48 kHz): HD input: 3.04 ms, SD input: 3.45 msNon-PCM audio or PCM with SRC off: HD input: 0.15 ms, SD input: 0.56 ms
Minimum Audio/Video Output Offset: SD: 40 µs, HD: 62 µs
EmbeddingDelete individual embedded audio group: Yes/noEmbedded audio stream: Silence, any incoming group or any audio inputOutput audio resolution: 20-, 24-bit, or auto as input
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames. As this module has no card-edge controls, an 8900NET (Net Card) Network Interface card is required to configure this module.
8925EMB-USD/HD embedder, front and rear, four unbalanced audio inputs, front and rear module set
SFP-13103G-M1TRXFiber transceiver. Low-power 1310 nm single-mode optical transceiver
SFP-13103G-M1DTXDual fiber transmitter. Dual low-power 1310 nm single-mode optical transmitter
SFP-13103G-M1DRXDual fiber receiver. Dual low-power 1310 nm single-mode optical receiver
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
The 8925EMB-U is a compact eight-channel SD/HD digital audio embedder (multiplexer) module. It provides three distributed SDI outputs with embedded audio and one output acting as an input reclocked loop-through. This module is ideal for building dense SD/HD and audio infrastructure for production and playout applications.
The module automatically detects the audio format, and Dolby E streams are also detected and passed transparently. The AES inputs can handle asynchronous audio and sampling rates from 32 kHz to 96 kHz, which are converted to synchronous 48 kHz embedded within the video stream.
With its fiber-ready architecture, the 8925EMB-U can be configured to support up to two fiber inputs and two fiber outputs. With the fiber transmitter or transceiver option, it can take video from copper or fiber, embed audio, and transmit over fiber in one single slot. The receiver option makes it ideal for receiving incoming feeds from longer distances and locally embedding audio.
8900UVF-R
J1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
AudioInput
AudioInput
SD/HDSDI Out
SD/HDSDI Out
ReclockedOutput
SD/HDSDI In
AudioInput
AudioInput
SD/HDSDI Out
SD/HDSDI Out
Fiber In/OutConnector
All parameters can be adjusted via standard HTML Web browsers or via the Newton Control Panel. In addition NetConfig and NetCentral can be used for remote configuration and signal health monitoring.
Bypass
Bypass
Sample RateConverter
3X SD/HDSDI Out
SD/HDReclockedSDI Out
SD/HDSDI In
Equalizer andReclocker
DelayBlock
Only one fiberoption may be
selected
Fiber TX
Fiber TX
Fiber TX
Fiber RX
Fiber RX
Fiber RX
SD/HDOptical In
2X SD/HDOptical In
SD/HDOptical Out
2X SD/HDOptical Out
Option Option
Option
MUX4XAES
In
Two Channels or One Stream
External Reference
input
Synchronizer
Option
Ref In
Bus Bus
Genlock Adjustment
Sample Rate Converter
Programmable Delay Tracking Delay Gain
Programmable Delay
Channel/
Stream Router
Dolby E & Non-PCM Path
AES 1 In
AES 2 In
AES 3 In
AES 4 In
Mono/Stereo Switch
M/S
M/S
M/S
AES 1 Out
AES 2 Out
AES 3 Out
AES 4 Out
DelayTracking
Two Channels or One Stream
Two Channels or One Stream
Two Channels or One Stream
The 8977AP-4B is a compact, high-performance, high-density digital audio processor. It provides processing at channel level for up to eight PCM audio channels. It also provides sample-rate conversion and synchronization for asynchronous and consumer-type sources. Automatic delay tracking synchronizes the sound to a video synchronizer, while a user-configurable delay can compensate for fixed latency processing.
A particularly powerful feature of the 8977AP-4B is its ability to handle Dolby E streams. These can be both routed and delayed while preserving the non-PCM data. The 8977AP-4B can handle a mix of Dolby E streams and PCM channels so that, for example, a Dolby stream on AES input 1 can be routed to AES output 2 and then replaced by selected PCM channels on output 1. Audio input and output connectors are all balanced (see 8977AP-4U for unbalanced connectors).
PCMaudiocanbesynchronizedtoareference;either a color black video reference, tri-level syncs, an AES feed, or even word-clock can be used. Reference can be fed directly to the module by fitting the optional 8900GEN-SM
Key FeaturesEight independent channels of audio •processing
Four AES Inputs and four AES outputs •– all balanced
Auto tracking delay to video synchronizers •
Fixed delay for each channel up to 10s•
Smooth audio handling when adjusting •delay
Channel routing for PCM signals, stream •routing for Dolby E
Dolby E programmable delay and routing•
Sample rate conversion accepts 32 kHz, •44.1 kHz, 48 kHz, or 96 kHz and outputs 48 kHz
Uses local or frame reference for •synchronization
High density (80 PCM channels per 2 RU •frame)
Remote control and monitoring via •Ethernet frame interface
ApplicationsA companion to the 8985, 8995, and 8981 •modules with video synchronization to provide AES audio handling with tracking delay
To route and control PCM channels •combined with Dolby E audio streams
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating6.0 Watts – single slot
Audio I/OAES: Four inputs, four outputs
Signal type: Balanced AES-3id-1997
Common mode range: Balanced 10 Vp-p DC 500 Hz to 20 kHz
Input sampling rate (FS): 32, 44.1, 48, or 96 kHz
Input resolution: 16-, 20-, or 24-bit
Input return loss: >20 dB (100 kHz – 128 FS)
Output sampling rate: 48 kHz
Output resolution: 20- or 24-bit
Output return loss: >15 dB (100 kHz – 128 FS)
Input impedance:Balanced:110Ω
Connector type: Balanced: mini-screw terminal block
ReferenceSee 8900GEN-SM genlock submodule
Tracking InputOne wire serial interface (RS-232 type)
Format: 1200 baud
Parity: Even
Bits/word: Seven
Stop bit: One
Connector type: BNC
Electrical Length (delay)PCM mode: 1.7 ms to 3.9 ms depending on input sampling rate, typically 3.9 ms at 48 kHz
Non-PCM mode: 280 µs
Sync PCM mode: 280 µs
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames. As this module has no card-edge controls, in order to configure this module, an 8900NET (Net Card) Network Interface module is required.
8977AP-4BAudio processor – eight channels – balanced audio I/O, front and rear module set
8977AP-4UAudio processor, front and rear – eight channels – unbalanced audio I/O (see next page)
8900GEN-SMReference input submodule
8900-GFA-CBLPackage of four three-terminal to dual BNC cables, used for unbalanced outputs on 8900A-R modules in a GeckoFlex frame
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
reference input submodule or alternatively taken from one of GeckoFlex’s two internal busses. This allows several modules in a frame to share a reference feed, including sharing it with a video synchronizer.
22 8977AP-4B Digital Audio Processor – Balanced I/O w/Delay
J1
J2J3
J4J5
J6J7
J8
J9
J10
J11
J13
J12
J14
8900BA-R
AudioInput
Audio DelayTracking
Input
AudioOutput
Not UsedRef Input
Not Used
Pin 3Pin 2Pin 1
Pin 1Pin 2Pin 3
+_
G
G_
+
The 8977AP-4U is a compact, high-performance, high-density digital audio processor. It provides processing at channel level for up to eight PCM audio channels. It also provides sample-rate conversion and synchronization for asynchronous and consumer-type sources. Automatic delay tracking synchronizes the sound to a video synchronizer, while a user-configurable delay can compensate for fixed latency processing.
A particularly powerful feature of the 8977AP-4U is its ability to handle Dolby E streams. These can be both routed and delayed while preserving the non-PCM data. The 8977AP-4U can handle a mix of Dolby E streams and PCM channels so that, for example, a Dolby stream on AES input 1 can be routed to AES output 2 and then replaced by selected PCM channels on output 1. Audio input and output connectors are unbalanced (see 8977AP-4B for balanced connectors).
PCMaudiocanbesynchronizedtoareference;either a color black video reference, tri-level syncs, an AES feed, or even word-clock can be used. Reference can be fed directly to the
Key FeaturesEight independent channels of audio •processing
Four AES inputs and four AES outputs – all •unbalanced
Auto tracking delay to video synchronizers •
Fixed delay for each channel up to 10s•
Smooth audio handling when adjusting •delay
Channel routing for PCM signals, stream •routing for Dolby E
Dolby E programmable delay and routing•
Sample rate conversion accepts 32 kHz, •44.1 kHz, 48 kHz, or 96 kHz and outputs 48 kHz
Uses local or frame reference for •synchronization
High density (80 PCM channels per 2 RU •frame)
Remote control and monitoring via •Ethernet frame interface
Applications A companion to the 8985, 8995, and 8981 •modules with video synchronization to provide AES audio handling with tracking delay
To route and control PCM channels •combined with Dolby E audio streams
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
AudioInput
AudioOutput
RefInput
Audio DelayTracking Input
8900UE-R
Two Channels or One Stream
External Reference
input
Synchronizer
Option
Ref In
Bus Bus
Genlock Adjustment
Sample Rate Converter
Programmable Delay Tracking Delay Gain
Programmable Delay
Channel/
Stream Router
Dolby E & Non-PCM Path
AES 1 In
AES 2 In
AES 3 In
AES 4 In
Mono/Stereo Switch
M/S
M/S
M/S
AES 1 Out
AES 2 Out
AES 3 Out
AES 4 Out
DelayTracking
Two Channels or One Stream
Two Channels or One Stream
Two Channels or One Stream
Specifications Ordering Information
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
module by fitting the optional 8900GEN-SM reference input sub-module or alternatively taken from one of GeckoFlex’s two internal busses. This allows several modules in a frame to share a reference feed including sharing it with a video synchronizer.
238977AP-4U Digital Audio Processor – Unbalanced I/O w/Delay
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating6.0 Watts – single slot
Audio I/OAES four inputs, four outputs
Signal TypeUnbalanced: AES-3id-2001
Common mode range: Unbalanced: N/A
Input sampling rate (FS): 32, 44.1, 48, or 96 kHz
Input resolution: 16-, 20-, or 24-bit
Input return loss: >20 dB (100 kHz – 128 FS)
Output sampling rate: 48 kHz
Output resolution: 20- or 24-bit
Output return loss: >15 dB (100 kHz – 128 FS)
Input impedance:Unbalanced:75Ω
Connector type: Unbalanced: BNC
ReferenceSee 8900GEN-SM genlock submodule
Tracking InputOne wire serial interface (RS-232 type)
Format: 1200 baud
Parity: Even
Bits/word: Seven
Stop bit: One
Connector type: BNC
Electrical Length (delay)PCM mode: 1.7 ms to 3.9 ms depending on input sampling rate, typically 3.9 ms at 48 kHz
Non-PCM mode: 280 µs
Sync PCM mode: 280 µs
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames. As this module has no card-edge controls, in order to configure this module, an 8900NET (Net Card) Network Interface module is required.
8977AP-4UAudio processor – eight channels – unbalanced audio I/O, front and rear module set
8977AP-4BAudio processor, front and rear – eight channels – balanced audio I/O (see previous page)
8900GEN-SMReference input submodule
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Outputs Outputs
Loopthru
Input
8900V-R
AnalogVideoInput
AC CoupledDC Coupled
AnalogVideoOutputs
Gain
24
This distribution amplifier is ideal for short cable runs of high-quality signals. Its flat frequency response and very impressive signal-to-noise ratio ensures high-quality copies to all eight outputs. The AC coupled mode is used when the incoming video signal has a blanking level at anything other than zero volts. For handling color-difference signals (B-Y, R-Y), DC input coupling is recommended. Additionally, the 8901 module can be used for simple fanout distribution of AES/EBU 1 Vp-p coaxial digital audio signals that do not need reclocking. The bandwidth of the 8901 easily handles the 6 MHz frequency response required by professional 48 kHz AES/EBU digital audio signals. Our entire line of both analog and digital distribution amplifiers offer passive differential loop-through inputs designed to remove common mode hum induced by cable runs adjacent to AC mains cables.
Key FeaturesSuitable for NTSC, PAL, SECAM, RGB, YUV, •Tri-level sync
Passive differential looping input with •eight active outputs
Selectable AC or DC input coupling modes•
Card-edge adjustable gain control•
Excellent differential gain and phase •specifications
Card-edge status indicators •
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating2.3 Watts – single slot
InputType: 1 Vp-p analog video with operation up to 2 Vp-p NTSC, PAL, SECAM, RGB, YUV, Tri-level sync
Connector type: BNC
Impedance: Passive high impedance differential loop-through
Return loss: >40 dB up to 5 MHz
CMRR: >66 dB 50/60 Hz
Common mode input: ±10V
OutputVoltage: 1 Vp-p ±2 dB
Number of outputs: Eight active plus one passive loop-through input window out
Connector type: BNC
Impedance: 75Ω
Return loss: >40 dB up to 5 MHz
Output DC: <50 mV
PerformanceFrequency response:•±0.025dBto5MHz•±0.05dB5to8MHz•–1dBat16MHz
Differential gain: <0.1%
Differential phase: <0.1°
Gain range: ±2 dB
Tilt: <0.5%
Coupling: AC, DC
Electrical length: 20 ns
Temperature range: 0° to 30°C
Indicators/ControlsUser controls: Output gain adjustment range: ±2 dB
LED indicators: Fault, power, frame bus communication
8901 Utility Analog Video Distribution Amplifier
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8901Utility analog video distribution amplifier
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
AnalogVideoInput
AnalogVideoOutputs
EQAdjust
GainAC CoupledDC CoupledDC Restored
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Outputs Outputs
Loopthru
Input
8900V-R
Ordering InformationSpecifications
25
Key FeaturesSuitable for NTSC, PAL, SECAM, RGB, YUV, •Tri-level sync
Passive differential looping input with •eight active outputs
Selectable AC, DC, and DC restore input •coupling modes
Card-edge adjustable cable-specific •equalization for up to 300 meters
Card-edge adjustable gain control•
Excellent differential gain and phase •specifications
Card-edge status indicators •
Offering the same features and functionality of the 8901 utility DA, this module adds cable equalization to accurately compensate for attenuation and phase errors induced from long cable runs. Additionally, the DC restoration mode can be used to smoothly restore the DC component during blanking level to zero volts. This DC restoration circuit functions with or without synchronization pulses so it can be used with RGB or YUV signals that do not contain synchronization pulses. Our entire line of both analog and digital distribution amplifiers offer differential loop-through inputs designed to remove common mode hum induced by cable runs adjacent to AC mains cables.
8902-EQ-11Belden RG11/U, 8238 cable
8902-EQ-1694ABelden 1694A cable
8902-EQ-8281Belden 8281 cable
8902-EQ-0.03-0.14Belden 1505A and Gepco VPM 2000
8902-EQ-9259Belden RG59U, 9259 cable
8902-EQ-VDM230Gepco VDM230 cable
8902-EQ-1.0-6.6PIK AF 0.6/6.6 cable
8902-EQ-0.6-2.8PIK AF 0.6/2.8 cable
8902-EQ-0.6-3.7PIK AF 0.6/3.7 cable
8902-EQ-PSF1-3PSF 1/3 cable
8902-EQ-5C2VSCanare L-5C2VS cable
8902-EQ-VCB100S2CEB VCB100 cable
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating2.3 Watts - single slot
InputType: 1 Vp-p analog video with operation up to 2 Vp-p NTSC, PAL, SECAM, RGB, YUV, Tri-level sync
Connector type: BNC
Impedance: Passive high impedance differential loop-through
Return loss: >40 dB up to 5 MHz
CMRR: >66 dB 50/60 Hz
Common mode input: ±10V
OutputVoltage: 1 Vp-p ±2 dB
Number of outputs: Eight active plus one passive loop-through input
Connector type: BNC
Impedance: 75Ω
Return loss: >40 dB up to 5 MHz
Output DC: <50 mV
PerformanceCable equalization: Dual range•0to150m(0–500ft.)•150to300m(500–1000ft.)
Frequency response: •±0.025dBto5MHz•±0.05dB5to8MHz•–1dBat16MHz
Differential gain: <0.1%
Differential phase: <0.1°
Gain range: ±2 dB
Tilt: <0.5%
Coupling: AC, DC, DC restore
Electrical length: 20 ns
Temperature range: 0° to 30°C
Indicators/ControlsUser controls: Output gain adjustment range: ±2 dB EQ adjustment for up to 300 meters of input cable
LED indicators: Fault, power, frame bus communication
8902 Analog Video Equalizing Distribution Amplifier
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Outputs Outputs
Loopthru
Input
8900V-R
AnalogVideoOutputs
AnalogVideoInput
EQAdjust
Video InputPresence Detection
AC CoupledDC CoupledDC Restored
Clamped
WhiteClip
Gain
Specifications Ordering Information
26
Key FeaturesSuitable for NTSC, PAL, SECAM, RGB, YUV, •Tri-level sync
Passive differential looping input with •eight active outputs
NTSC/PAL input presence detection with •SNMP trap generation
Selectable AC, DC, DC restore, or clamp •(slow/fast) input coupling
Selectable, dual-speed clamp for single-•ended hum rejection
Adjustable White Clipper removes peak •impulse transients
Card-edge adjustable cable-specific •equalization for up to 300 meters
Card-edge adjustable gain control•
Excellent differential gain and phase •specifications
Card-edge status indicators •
This distribution amplifier offers all the features and functionality of our 8901 utility DA and our 8902 equalizing DA, plus a dual-speed clamp and video presence detection with SNMP trap generation. While all Grass Valley distribution amplifiers remove differential or common mode hum induced by cable runs adjacent to AC mains cables, this module offers a dual-speed self-clamping circuit to handle single-ended hum caused by grounded coaxial cable shields.
Additionally, a White Clipper circuit eliminates impulse noise above a user-selectable threshold. And the user-enabled video presence detection feature generates SNMP traps that can be sent to our NetCentral SNMP manager or other SNMP systems for mission-critical applications.
8906-EQ-11Belden RG11/U, 8238 cable
8906-EQ-1694Belden 1694A cable
8906-EQ-8281Belden 8281 cable
8906-EQ-0.03-0.14Belden 1505A and Gepco VPM 2000
8906-EQ-9259Belden RG59U, 9259 cable
8906-EQ-VDM230Gepco VDM230 cable
8906-EQ-1.0-6.6PIK AF 0.6/6.6 cable
8906-EQ-0.6-2.8PIK AF 0.6/2.8 cable
8906-EQ-0.6-3.7PIK AF 0.6/3.7 cable
8906-EQ-PSF1-3PSF 1/3 cable
8906-EQ-5C2VSCanare L-5C2VS cable
8906-EQ-VCB100S2CEB VCB100 cable
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating2.3 Watts – single slot
InputType: 1 Vp-p analog video with operation up to 2 Vp-p NTSC, PAL, SECAM, RGB, YUV, Tri-level sync
Connector type: BNC
Impedance: Passive high impedance differential loop-through
Return loss: >40 dB up to 5 MHz
CMRR: >66 dB 50/60 Hz
Common mode input: ±10V
OutputVoltage: 1 Vp-p ±2 dB
Number of outputs: Eight active plus one passive loop-through input
Connector type: BNC
Impedance: 75Ω
Return loss: >40 dB up to 5 MHz
Output DC: <50 mV
PerformanceCable equalization: Dual range•0to150m(0–500ft.)•150to300m(500–1000ft.)
White clip: On/off user selectable
Frequency response: •±0.05dBto5MHz•±0.1dB5to8MHz•–1dBat16MHz
Differential gain: <0.1%
Differential phase: <0.1°
Gain range: ±2 dB
Tilt: <0.5%
Coupling: AC, DC, DC restore, clamp two speeds
Clamp hum rejection: Slow: 20 dB Fast: 46 dB
Electrical length: 22 ns
Temperature range: 0° to 30°C
Indicators/ControlsUser controls: Output gain adjustment range: ±2 dB EQ adjustment for up to 300 meters of input cable White clipper adjustment range: 500 mV to 1200 mV
LED indicators: Fault, power, frame bus communication
8906 Analog Video Clamping Equalizing Distribution Amplifier w/SNMP
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
SDI onlyOutputs(180 º)
SDI onlyOutput(180 º)
ASI/SDI Outputs
(0 º)
Loopthru
8900V-R
ASI/SDI Outputs(0 º)
ASI/SDI Output(0 º)
ASI/SDI Input(0 º)
EQ WarningAdjustment Input
Monitor EQ Warning LED
SDI or 4fscOutputs (180)Only
ASI/SDI or 4fscOutputs (0)
EQASI, SDI or4fsc Input
278906 Analog Video Clamping Equalizing Distribution Amplifier w/SNMP
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8931Digital video fanout distribution amplifier
The 8931 digital video fanout distributor amplifier is designed for distributing all major serial digital video formats. It is especially suited for short runs of recently reclocked signals where jitter is not a problem.
Key FeaturesPassive differential loop-through design •adds system flexibility and reliability
Eight outputs•
Auto input cable equalization up to 300m•
Supports both component and composite •signals, all data rates 143, 177, 270, 360 Mb/s
Front panel LED indicate EQ warning•
Remote health monitoring•
NOTE: ASI compatibility with 0° in phase outputs
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating2.5 Watts – single slot
InputType: Serial digital (SMPTE 259M A, B, C, and D)
Connector type: BNC
Impedance: High Z differential loop-through
Supported data rates: 143, 177, 270, and 360 Mb/s
Return loss: >18 dB up to 270 MHz, >15 dB up to 360 MHz
Automatic cable equalization: <300 meters (up to 270 Mb/s) <200 meters (up to 360 Mb/s)
OutputType: Serial digital (SMPTE 259M A, B, C, and D)
Number of outputs: Eight
Connector type: BNC
Impedance: 75Ω
Return loss: >18 dB up to 270 MHz >15 dB up to 360 MHz
PerformanceNo signal reclocking
Electrical length: 3.4 ±1 ns
Temperature range: 0° to 50°C (all specifications met)
Health monitoring: Power supply fault alert per SMPTE 269M•Inputsignalpresent•InputEQwarning
Indicators and ControlsIndicators: EQ warning
Remote: Frame alarm
8931 Digital Video Fanout Distribution Amplifier
For detailed specifications, installation and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Outputs Outputs
Loopthru
Input
8900V-R
Reclocker
LEDs
Video Input
PresenceDetection
EQASI or SDI In
LocalControl
BypassSwitch ASI or
SDI Out
Ethernet Controlvia frame bus
Microprocessor
28
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8937 SDI/ASI reclocking equalizing distribution amplifier
This distribution amplifier is ideal for medium- to long-distance distribution of digital signals. It is fully DVB ASI compatible so it can be used in any application where standard SDI video or ASI signals are to be copied and distributed. The standard reclocker circuit greatly reduces jitter induced over long cable runs or from unstable sources of standard data rate signals. The reclocker can easily be disabled to pass SMPTE 310M and other non-standard data rate signals. A user-enabled video presence detection feature generates SNMP traps that can be sent to our NetCentral SNMP manager or other SNMP systems.
Key FeaturesPassive differential looping input with •eight active outputs
Suitable for SMPTE 310M, SMPTE 259M, •DVB ASI, SDI 270 Mb/s plus most other 800 mV data from 4 Mb/s to 360 Mb/s
Input presence detection with SNMP trap •generation
Reclocking circuit eliminates jitter •
Automatic input cable equalization for up •to 300 meters
Card edge LEDs status indicators •
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating3 Watts – single slot
InputType: 800 mV ±10% serial digital data including SMPTE 259M
Connector type: BNC
Impedance: High Z differential loop-through
Supported data rates: 4 Mb/s through 360 Mb/s
Reclocked data rates: 143, 177, 270, 360 Mb/s
Return loss: >15 dB (up to 360 MHz)
Auto equalization: Up to 300 meters (270 Mb/s)
OutputType: 800 mV serial digital data in phase with the input signal
Number of outputs: Eight active plus one passive loopthrough
Connector type: BNC
Impedance: 75Ω
Return loss: >15 dB (up to 360 MHz)
PerformanceElectrical length: <20 ns
Temperature range: 0° – 45°C
Local Indicators/ControlsLED indicators:•Signalpresence•Inputsamplerate
User controls: •Bypass/autojumperselectionforreclocker•Local/local-remotecontrolenablejumper
Remote: SNMP trap generation – input presence detection
8937 SDI/ASI Reclocking Equalizing Distribution Amplifier
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Output 2
Input 2
Output 1
Input 1
Output 2
Output 1
Loopthru
Output 1(passive)
8900V-R
Reclocker
Reclocker
Video Input
PresenceDetection
Video Input
PresenceDetection
EQ
EQASI or SDI In 2
ASI or SDI In 1
SDI Out 1(passive)
LocalControl
LEDs
BypassSwitch
BypassSwitch
ASI orSDI Out 1
ASI orSDI Out 2
Ethernet Controlvia frame bus
Microprocessor
Specifications Ordering Information
29
Key FeaturesTwo separate distribution amplifiers on a •single card
One with a looping differential input with •three active outputs in addition to the loop-through passive output
One with a single-ended terminating •input with four active outputs
Suitable for SMPTE 310M, SMPTE 259M, •DVB ASI, SDI 270 Mb/s and most other 800 mV data from 4 Mb/s to 360 Mb/s
Input presence detection for each channel •with SNMP trap generation
Independent reclocking circuits for each •channel to reduce jitter
Automatic input cable equalization for up •to 300 meters for each channel
Card edge LED status indicators •
This distribution amplifier is ideal for space-constrained applications where a limited number of signal copies are required. By offering twice the density, it’s a perfect solution for mobile production applications—enabling 20 channels of distribution in only 2 RU of rack space. Both channels are fully DVB ASI compatible and can be used in any application where standard SDI video or ASI signals are to be copied and distributed. The standard reclocker circuits greatly reduces jitter-induced over cable runs adjacent to high power lines or from unstable sources of standard data rate signals. The reclocker can easily be disabled to pass SMPTE 310M and other nonstandard data rate signals. A user-enabled video presence detection feature generates individual SNMP traps for each channel that can be sent to our NetCentral SNMP manager or other SNMP systems.
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating3.5 Watts – single slot
InputsType: 800 mV ±10% serial digital data including SMPTE 259M
Connector type: BNC
Impedance: High Z differential loop-through and 75Ω terminating
Supported data rates: 4 Mb/s through 360 Mb/s
Reclocked data rates: 143, 177, 270, 360 Mb/s
Return loss: >15 dB (up to 360 MHz)
Auto equalization: Up to 300 meters (270 Mb/s)
OutputType: 800 mV serial digital data in phase with the input signal
Number of outputs:•Fouroutputs,threeactiveplusonepassiveloop-
through•Fouroutputs,fouractivesignals
Connector type: BNC
Impedance: 75Ω
Return loss: >15 dB (up to 360 MHz)
PerformanceElectrical Length: <20 ns
Temperature Range: 0° – 45°C
Local Indicators/ControlsLED indicators: •Signalpresence•Inputsamplerate
User controls:•Bypass/autojumperselectionforreclocker•Local/local-remotecontrolenablejumper
Remote: SNMP trap generation – input presence detection
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8937D Dual SDI/ASI reclocking equalizing distribution amplifier
8937D Dual SDI/ASI Reclocking Equalizing Distribution Amplifier
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
SDI OnlyOutputs(180 º)
ASI/SDIOutput
(0 º)
SDIInput(0 º)
Loopthru
8900V-R
SDIInput(0 º)
ASI/SDIOutput(0 º)
NTSC/PALAnalog Out
NTSC/PALAnalog Out
SDI OnlyOutput(180 º)
Auto orManual Modes
Input Monitor
SDI Input(270 Mb/s)
De-serializer
Reclocker
PLD
Encoder+ DA
EQ LED
Signal + Format LEDs
ASI/SDI Output0
SDI Only Output180
NTSC/PAL OutputsTRS
Detector
Specifications
30
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8941Component digital monitoring distribution amplifier
The 8941 monitoring DA supports up to four NTSC or PAL encoded monitor outputs for picture viewing, in addition to four reclocked serial component digital outputs. The 8941 is tailored specifically for 270 Mb/s serial component digital signals, both 525 and 625 formats. In addition to a composite video monitoring output, the 8941 also indicates via front panel LED whether either ancillary data or audio is embedded in the signal.
Key FeaturesPassive differential loop-through design •adds flexibility and reliability to system
Four NTSC/PAL analog composite outputs •and four serial component digital outputs
Ancillary data and audio detection•
Auto format detection (525/625)•
Front panel LEDs indicate line count, •EQ warning, and ancillary audio/data presence
Remote health monitoring•
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating5.5 Watts – single slot
InputType: Serial digital (SMPTE 259M-C)
Connector type: BNC
Impedance: High Z differential loop-through
Supported data rate: 270 Mb/s
Return loss: >18 dB (up to 270 MHz)
Automatic cable equalization: <300 meters (up to 270 Mb/s)
Digital OutputType: Serial digital (SMPTE 259M-C)
Number of outputs: Four
Connector type: BNC
Impedance: 75Ω
Return loss: >18 dB (up to 270 MHz)
Analog OutputType: Composite NTSC/PAL analog (SMPTE 170M or CCIR 624)
Number of outputs: Four
Connector type: BNC
Impedance: 75Ω
Return loss: >40 dB (up to 5 MHz)
PerformanceDigital output signal reclocked
Differential gain: <1% (analog output)
Differential phase: <1° (analog output)
Electrical length:•Analog:9.87µstypical•Digital:10nstypical
Temperature range: 0° to 50°C (All specifications met)
Health monitoring: Power supply fault alert per SMPTE 269M, input signal present, input EQ warning, missing EAV/SAV
Indicators and ControlsIndicators: Input video present, EQ warning, ancillary data present, ancillary audio data present
User controls: Setup, input rounding, health alarm modes, cross-color reduction, vertical blanking, test signal, output gain
Remote: Frame alarm
Test signal: Full field color bars
8941 Component Digital Video Monitoring Distribution Amplifier
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J9Input Equalizer
Reclock Bypass
Reclocker
J1J2J3J4
J5J6J7J8
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Out
Out
Out
Out
Out
Out
Out
Out
Not Used In
89003E-R
318943RDA SD/HD/3G Reclocking Distribution Amplifier
Supported Frame TypesGeckoFlex frame
Power Rating2.7 Watts – single slot
InputsSD/HD/3G-SDI: One electrical input (J9)•Inputequalization(Belden1694Acable)
90m for 3 Gb/s (Input 1) 140m for 1.5 Gb/s 400m for 270 Mb/s
•Returnloss:>15dBupto1.5Gb/s, 10 dB (typical) up to 3 Gb/s
Formats supported: •SD-SDI•HD-SDI•3G-SDI•DVBASI
OutputsSD/HD/3G-SDI: Eight reclocked electrical outputs•Returnloss:>15dBupto1.5Gb/s,
>10 dB (typical) up to 3 Gb/s•Signallevel:800mV±10%•Outputjitter(forinputsconformingtoSMPTE259M
and 292M standards): <0.2 UI >100 kHz for 3G <0.2 UI >100 kHz for HD <1.0 UI 10 Hz – 100 kHz for HD
<0.2 UI 10 Hz – up for SD
DVB ASI: Eight non-inverted outputs
DistributionReclocking: Active/bypass
Input format selection: Auto/manual
Electrical length (input to output latency in ns): CH1: Input J9 to Output J1: 3G: Reclocked: 3.8 ns, Bypassed: 3.55 ns HD: Reclocked: 4.0 ns, Bypassed: 3.6 ns SD: Reclocked: 6.0 ns, Bypassed: 4.0 ns
Control and MonitoringSNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames.
8943RDASD/HD/3G-SDI reclocking distribution amplifier, front and rear module set
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Key FeaturesReclocking SD-SDI, HD-SDI, and 3G-SDI •distribution amplifier
Auto or manual input format selection•
Supports rates up to 1080p•
Single 1x8 DA •
100% DVB ASI compliant•
High density (up to ten 1x8 DAs per 2 rack •unit)
Remote control and monitoring via •Ethernet frame interface
ApplicationsDistributing HD/3G signals or mixed HD/3G •and SD format installations
Installations where an SD to HD/3G update •is planned
Installations where highest density is •required at the lowest cost
The 8943RDA is an SD/HD/3G-SDI reclocking distribution amplifier with one electrical input feeding eight reclocked electrical outputs. The module is completely DVB ASI compliant.
This module can distribute HD/3G-SDI or SD-SDI, making it ideal for mixed-format applications or installations where an upgrade to HD/3G is planned. Cable equalization is up to 90 meters for HD/3G-SDI and 440 meters for SD-SDI.
All parameters can be configured directly from the card edge or via a standard HTML Web browser when the 8900NET (Net Card) Network Interface module has been installed. The module operation and configuration, as well as the signal presence and format, can be monitored using industry standard SNMP protocol via the 8900NET (Net Card) module.
Specifications
89003FR-RJ1 J2
J3 J4
J5 J6
J7
1
2
J8
J10
FIBER
Out
Out
Out
Out
In
Out
Out
Out
In
Fiber I/OConnector
Ordering InformationSpecificationsSupported Frame TypesGeckoFlex frame
Power Rating5.2 Watts (no SFP fiber submodule) – single slot 5.9 Watts (with SFP fiber submodule) – single slot
InputsSD/HD/3G-SDI: Two electrical inputs (J10 and J8) and 2 optional single-mode fiber optic inputs (with dual receiver), or 1 optional fiber optic input (with transceiver)•Inputequalization(Belden1694Acable)
90m for 3 Gb/s (Input 1, J10) 100m for 3 Gb/s (Input 2, J8) 140m for 1.5 Gb/s 400m for 270 Mb/s
•Returnloss:>15dB:upto1.5Gb/s, 10 dB (typical) up to 3 Gb/s
Formats supported: •SD-SDI•HD-SDI•3G-SDI•DVBASI
OutputsSD/HD/3G-SDI: Seven reclocked electrical outputs (in four output pairs (J1/J2, J3/J4, J5/J6, and J7) and two single-mode fiber optic outputs (with dual transmitter option, or one fiber optic output (with transceiver option)•Returnloss:HD>15dBupto1.5Gb/s,
>10 dB up to 3 Gb/s•Signallevel:800mV±10%
•Outputjitter(forinputsconformingtoSMPTE259Mand 292M standards):
<0.2 UI >100 kHz for 3G <0.2 UI >100 kHz for HD <1.0 UI 10 Hz – 100 kHz for HD
<0.2 UI 10 Hz – up for SD
DVB ASI: Seven non-inverted outputs (in output pairs)
Electrical Length (input to output latency in ns) : CH1: Input J10 to Output J1: 3G: Reclocked: 3.8 ns, Bypassed: 3.55 ns HD: Reclocked: 4.0 ns, Bypassed: 3.6 ns SD: Reclocked: 6.0 ns, Bypassed: 4.0 ns
CH2: Input J8 to Output J1: 3G: Reclocked: 4.0 ns, Bypassed: 3.75 ns HD: Reclocked: 4.1 ns, Bypassed: 3.7 ns SD: Reclocked: 6.2 ns, Bypassed: 4.25 ns
CH3: Input F2 to Output F1 (Transceiver option): 3G: Reclocked: 6.0 ns, Bypassed: 5.7 ns HD: Reclocked: 6.0 ns, Bypassed: 5.7 ns SD: Reclocked: 11.25 ns, Bypassed: 9.25 ns
Reclocking: Active/bypass
Input format selection: Auto/manual
Control and MonitoringSNMP: YesWeb page configuration: YesLocal configuration: YesNewton support: YesNetConfig support: YesNetCentral support: Yes
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames.
8943RDA-DFRSD/HD/3G-SDI reclocking distribution amplifier, front and rear module set
Fiber Optic SFP Options: Order one option kit (fiber optic submodule, mounting bracket and cable assembly) per front module depending on your application for signals up to 3 Gb/s.
Dual Receiver (1270 nm >1610 nm): SFP-13103G-M1DRX-K
Dual Transmitter, 1310 nm and 1310 nm: SFP-13103G-M1DTX-K
Fiber Transceiver, 1310 nm and 1310 nm: SFP-13103G-M1TRX-K
CWDM Dual Transmitter, 1470 nm and 1490 nm: SFP-CWDM3G-1-K
CWDM Dual Transmitter, 1510 nm and 1530 nm: SFP-CWDM3G-2-K
CWDM Dual Transmitter, 1550 nm and 1570 nm: SFP-CWDM3G-3-K
CWDM Dual Transmitter, 1590 nm and 1610 nm: SFP-CWDM3G-4-K
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Key FeaturesSupports SD/HD/3G-SDI rates up to 1080p•
Auto or manual input format selection•
Fiber-ready for fiber optic submodule •option for receiving or distributing over single-mode fiber
Two dedicated electrical inputs•
Seven reclocked electrical outputs •(in four output pairs: 3x2 and 1x1)
Configurable input to output mapping•
100% DVB ASI compliant•
High connectivity input/output density •with multiple configurations
Remote control and monitoring via •Ethernet frame interface
Input to output mapping: all availalbe •inputs can be active at the same time and are configurable to any output pair or available optional fiber optic output (one input per electrical output pair or fiber optic output). Availability of fiber optic inputs and outputs depends on the type of option fiber optic submodule installed
ApplicationsDistributing HD/3G signals or mixed HD/3G •and SD format installations
Installations where an SD to HD/3G update •is planned
Combining HD/3G, SD, or ASI distribution •with a long-distance isolated fiber connection
The 8943RDA-DFR is a fiber-ready SD/HD/3G-SDI reclocking DA with two dedicated electrical inputs and seven reclocked electrical outputs (in four output pairs). An optional fiber optic submodule can be installed to provide additional fiber optic inputs and outputs.
The module can equalize up to 90 meters for input 1 (J10) and 100 meters for input 2 (J8) of Belden 1694A cable for HD/3G-SDI. It can distribute either HD/3G-SDI or SD-SDI, making it ideal for mixed format applications or installations where an upgrade to HD/3G is planned. It is also completely DVB ASI compliant.
With its fiber-ready architecture, the 8943RDA-DFR can be configured as a fiber receiver, providing two fiber optic inputs that can be mapped to feed seven electrical outputs (in output pairs). The two fiber optic inputs are both active along with the dedicated electrical inputs. This makes the module ideal where redundant feeds are used.
Using the dual transmitter fiber option, this module can distribute two additional fiber outputs as well as the seven electrical outputs (in output pairs) allowing it to feed both local and remote locations simultaneously. This can also provide redundant fiber feeds.
With the transceiver option, the 8943RDA-DFR makes a flexible DA ready for either fiber in or fiber out applications. The fiber option makes it ideal for receiving signals from distant downlinks or transmitting to remote uplinks.
Refer to the configuration block diagrams on the next page for illustrations of the mulitple uses for the 8943RDA-DFR with the available fiber optic submodule options. Note that all module inputs and outputs can be active at the same time and input to output mapping can be set as desired in configuration.
All parameters can be configured directly from the card edge or via a standard HTML Web browser when the 8900NET (Net Card) Network Interface module has been installed. The module operation and configuration, as well as the signal presence and format can be monitored using industry standard SNMP protocol via the 8900NET (Net Card) module.
32 8943RDA-DFR Fiber-Ready SD/HD/3G Reclocking Distribution Amplifier 8943RDA-DFR Fiber-Ready SD/HD/3G Reclocking Distribution Amplifier
338943RDA-DFR Fiber-Ready SD/HD/3G Reclocking Distribution Amplifier 8943RDA-DFR Fiber-Ready SD/HD/3G Reclocking Distribution Amplifier
8943RDA-DFR (without Fiber Optic option)
Active Inputs Available OutputsBNC J10
BNC pairs: J1/J2, J3/J4, J5/J6, J7BNC J8
8943RDA-DFR (with Dual Receiver Fiber Optic option)
Active Inputs Available OutputsBNC J10
BNC pairs: J1/J2, J3/J4, J5/J6, J7BNC J8
Fiber 1 In
Fiber 2 In
8943RDA-DFR (with Dual Transmitter Fiber Optic option)
8943RDA-DFR (with Transceiver Fiber Optic option)
BNC J10Input
BNC J8Input
Equalizer
Reclock Bypass
Reclocker
Fiber 1Output
Equalizer
Reclock Bypass
ReclockerInput to Output
Mapping
Fiber 2Output
Dual Transmitter
Option
Fiber TX
Fiber TX
J1J2
J3J4
J5J6
J7
BNC J10Input
BNC J8Input
Equalizer
Reclock Bypass
Reclocker
Fiber 1Input
Equalizer
Reclock Bypass
Reclocker
Fiber 2 Output
Reclock Bypass
Reclocker
Input to Output
Mapping
Transceiver OptionFiber RX Fiber TX
J1J2
J3J4
J5J6
J7
Active Inputs Available OutputsBNC J10 BNC pairs: J1/J2, J3/J4, J5/J6, J7,
Fiber 1 Out, Fiber 2 OutBNC J8
Active Inputs Available OutputsBNC J10
BNC pairs: J1/J2, J3/J4, J5/J6, J7, Fiber 2 Ouptut
BNC J8
Fiber 1 Input
BNC J10Input
BNC J8Input
Reclock Bypass
Reclocker
Fiber 1Input
Reclock Bypass
Reclocker
Equalizer
Equalizer
Reclock Bypass
Reclocker
Input to Output
Mapping
Fiber 2Input
Reclock Bypass
Reclocker
Dual Receiver
Option
Fiber RX
Fiber RX
J1J2
J3J4
J5J6
J7
J10Input
J8Input
Equalizer
Reclock Bypass
Reclocker
Equalizer
Reclock Bypass
Reclocker
Input to Output
Mapping
J1J2J3J4
J5J6J7
Specifications Ordering InformationOrdering InformationOrdering InformationSpecifications
8943RDA-D Dual SD/HD/3G Reclocking Distribution Amplifier
Key FeaturesSupports SD/HD/3G-SDI rates up to 1080p•
Two electrical inputs•
Four electrical reclocked output pairs•
Configurable input to output pair mapping•
Auto or manual input format selection•
100% DVB ASI compliant•
High density (up to twenty DA inputs per •2 rack unit)
Remote control and monitoring via •Ethernet frame interface
ApplicationsDistributing HD/3G signals or mixed HD/3G •and SD format installations
Installations where an SD to HD/3G update •is planned
Installations where highest density is •required at the lowest cost
For optimizing and adapting trade-off •between number of DAs and number of outputs
J9Input
J10Input
Equalizer
Reclock Bypass
Reclocker
Equalizer
Reclock Bypass
Reclocker
Input to Output
Mapping
J1J2J3J4
J5J6J7J8
Supported Frame TypesGeckoFlex frame
Power Rating3.8 Watts – single slot
InputsSD/HD-SDI: Two electrial inputs (J9 and J10)•Inputequalization(Belden1694Acable)
90m for 3 Gb/s (Input 1, J9) 100m for 3 Gb/s (Input 2, J10) 140m for 1.5 Gb/s 400m for 270 Mb/s
•Returnloss:>15dBupto1.5Gb/s, 10 dB (typical) up to 3 Gb/s
Formats supported: •SD-SDI•HD-SDI•3G-SDI•DVBASI
OutputsSD/HD-SDI: Eight reclocked electrical outputs (in four output pairs: J1/J2, J3/J4, J5/J6 and J7/J8)•Returnloss:>15dBupto1.5Gb/s,
>10 dB to 3 Gb/s•Signallevel:800mV±10%•Outputjitter(forinputsconformingtoSMPTE259M
and 292M standards): <0.2 UI >100 kHz for 3G <0.2 UI >100 kHz for HD <1.0 UI 10 Hz – 100 kHz for HD
<0.2 UI 10 Hz – up for SD
DVB ASI: Eight non-inverted outputs (four output pairs)
DistributionReclocking: Active/bypass
Input format selection: Auto/manual
Input to output mapping: Both inputs are active at the same time and are configurable to any output pair (one input per electrical output pair).
Electrical length (input to output latency in ns): CH1: Input J9 to Output J1: 3G: Reclocked: 3.8 ns, Bypassed: 3.55 ns HD: Reclocked: 4.0 ns, Bypassed: 3.6 ns SD: Reclocked: 6.0 ns, Bypassed: 4.0 ns
CH2: Input J10 to Output J1: 3G: Reclocked: 4.0 ns, Bypassed: 3.75 ns HD: Reclocked: 4.1 ns, Bypassed: 3.7 ns SD: Reclocked: 6.2 ns, Bypassed: 4.25 ns
Control and MonitoringSNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames.
8943RDA-DDual SD/HD/3G-SDI reclocking distribution amplifier, front and rear module set
The 8943RDA-D is a dual input SD/HD/3G-SDI reclocking distribution amplifier. It provides two electrical inputs that can be mapped to feed any of four reclocked electrical output pairs (one input per output pair). The module is also completely DVB ASI compliant.
It can distribute either HD/3G-SDI or SD-SDI, making it ideal for mixed format applications or installations where an upgrade to HD/3G-SDI is planned. Up to 90 meters for input 1 (J9), 100 meters for input 2 (J10) of Belden 1694A cable can be equalized for HD/3G-SDI and up to 440 meters for SD-SDI.
All parameters can be configured directly from the card edge or via a standard HTML Web browser when the 8900NET (Net Card) Network Interface module has been installed. The module operation and configuration, as well as the signal presence and format, can be monitored using industry standard SNMP protocol via the 8900NET (Net Card) module.
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Out
Out
Out
Out
Out
Out
Out
Out
In In
89003E-R
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
34
Specifications Ordering InformationSpecifications Ordering Information
358945EDA SD/HD Equalizing Distribution Amplifier
Key FeaturesEight output SD-SDI or HD-SDI equalizing •distribution amplifier
100% DVB ASI compliant•
Remote control and monitoring via •Ethernet frame interface
ApplicationsDistributing HD signals or supporting •SD/HD rate-agile installations
Installations that will upgrade to HD•
Distribution of non-standard wideband •signals
The 8945EDA module is a single SD/HD equalizing distribution amplifier. It provides eight outputs and can equalize up to 125 meters of Belden 1694A cable for HD-SDI. It can be used to distribute either SD-SDI or HD-SDI, making it ideal for mixed-format applications or installations where an upgrade is planned.
Supported Frame TypesGeckoFlex frame
Power Rating2.5 Watts – single slot
InputsSD/HD-SDI: One input
Input equalization (Belden 1694A): •Upto125mHD-SDI•Upto330mSD-SDI
Return loss: >15 dB 0.004 to 1.5 GHz
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94 (NTSC) 576i @ 50 (PAL-B)
DVB ASI: Yes
Input type supported: •SMPTE259-M•292-M•344-M(270,1483.5and1485Mb/s)
Input type selection: Manual only between HD and SD/ASI
PerformanceElectrical length: <5 ns
OutputsSD/HD-SDI: Eight outputs
Return loss: •>15dB,5to270MHz•>10dBto1.5GHz
Signal level: SDI 800 mVp-p ±10%
DVB ASI: Eight non-inverted outputs
DistributionEqualizing: Active/bypass
Output mode: 1x8
Input type selection: Manual only between HD and SD/ASI
Control and MonitoringSNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames.
8945EDASD/HD equalizing distribution amplifier (front and rear module set)
SD/HDSDI In
Equalizer
8X SD/HDSDIOut
Equalizer bypass
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900WE-R
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI In
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
Not Used
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering InformationSpecifications Ordering Information
36
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI In
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI In
8900WE-R
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
SD/HDSDI In
Equalizer
4X SD/HD-SDIOut
4X SD/HD-SDIOut
Equalizer bypass
SD/HDSDI In
Equalizer
Equalizer bypass
8945EDA-D Dual SD/HD Equalizing Distribution Amplifier
Key FeaturesDual SD-SDI or HD-SDI equalizing •distribution amplifier
Single 1x8 or dual and configurable •1x4 models
100% DVB ASI compliant•
High density (up to 10 1x4 distribution •amplifiers per rack unit)
Equalizer bypass for low bit-rate signals•
Remote control and monitoring via •Ethernet frame interface
ApplicationsDistributing stable HD signals or SD/HD in •rate-agile installations
Installations that will upgrade to HD•
Optimizing density and cost•
Distribution of non-standard wideband •signals
The 8945EDA-D module is a dual SD/HD equalizing distribution amplifier. It provides four outputs for each of its two inputs and can equalize up to 125 meters of Belden 1694A cable for HD-SDI. It can be used to distribute either SD-SDI or HD-SDI, making it ideal for mixed-format applications or installations where an upgrade is planned.
Supported Frame TypesGeckoFlex frame
Power Rating2.9 Watts – single slot
InputsSD/HD-SDI: Two inputs
Input equalization (Belden 1694A): •Upto125mHD-SDI•Upto330mSD-SDI
Return loss: >15 dB 0.004 to 1.5 GHz
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94 (NTSC) 576i @ 50 (PAL-B)
DVB ASI: Yes
Input types supported: SMPTE 259-M, 292-M, 344-M (270, 1483.5 and 1485 Mb/s)
Input type selection: Manual only between HD and SD/ASI
PerformanceElectrical Length: <5 ns
OutputsSD/HD-SDI: Eight outputs
Return loss: •>15dB,5to270MHz•>10dBto1.5GHz
Signal level: SDI 800 mVp-p ±10%
DVB ASI: Eight non-inverted outputs
DistributionEqualizing: Active/bypass
Output mode: 1x8/dual 1x4
Input type selection: Manual only between HD and SD/ASI
Control and MonitoringSNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames.
8945EDA-DDual SD/HD equalizing distribution amplifier, front and rear module set
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
3737
Key FeaturesDual SD-SDI or HD-SDI reclocking •distribution amplifier
Automatic input-format detection•
Single 1x8 or dual and configurable •1x4 models
100% DVB ASI compliant•
High density (10 1x4 distribution •amplifiers per rack unit)
Equalizer bypass for low bit-rate signals•
Remote control and monitoring via •Ethernet frame interface
ApplicationsDistributing HD signals or SD/HD in •rate-agile installations
Installations that will upgrade to HD•
Optimizing density and cost•
Optimizing trade-offs between the number •of modules and outputs
The 8947RDA-D is a dual SD/HD re-clocking distribution amplifier, with automatic format detection. It provides four to eight reclocked outputs for each of its two inputs and can equalize up to 125 meters of Belden 1694A cable for HD-SDI. It can be used to distribute either HD-SDI or SD-SDI making it ideal for mixed format applications or installations where an upgrade is planned.
All parameters can be configured directly from the card edge or via standard HTML Web browser if a network interface module has been installed. The module operation and configuration as well as the signal presence and format can be monitored using industry standard SNMP protocol via the network interface module.
Supported Frame TypesGeckoFlex frame
Power Rating4.1 Watts – single slot
InputsSD/HD-SDI: Two inputs•Inputequalization:upto125mHD-SDI,
up to 330m SD-SDI (Belden1694A)•Returnloss:>15dB0.004to1.5GHz
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94 (NTSC) 576i @ 50 (PAL-B)
DVB ASI: Yes
OutputsSD/HD-SDI: Eight outputs•Returnloss:>15dB,5to270MHz;
>10 dB to 1.5 GHz•Signallevel:SDI800mVp-p±10%•Outputjitter:forinputwith<0.1UIjitter,theoutput
jitter complies with the SMPTE 259M and 292M standards
DVB ASI: Eight non-inverted outputs
PerformanceElectrical length: <10 ns (reclocking enabled) <5 ns (reclocking bypassed)
DistributionEqualizing: Active/bypass
Reclocking: Active/bypass
Input format selection: Automatic/manual
Control and MonitoringSNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames.
8947RDA-DDual SD/HD reclocking distribution amplifier, front and rear module set
8947RDA-D Dual SD/HD Reclocking Distribution Amplifier
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900WE-R
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI In
SD/HDSDI In
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI In
Equalizer
4X SD/HD-SDIOut
4X SD/HD-SDIOut
Equalizer bypass
SD/HDSDI In
Equalizer
Equalizer bypass
Reclocker
Reclock bypass
Reclocker
Reclock bypass
Formatdetector
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
38
8900WFR-RJ1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI In
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
Fiber I/OConnector
8X SD/HDSDIOut
SD/HDSDI In
Equalizer
Equalizer bypass
Reclocker
Reclock bypass
Up to one fiberoption may beselected
Fiber RX
Fiber RX
Fiber RX
Fiber TX
Fiber TX
Fiber TX
SD/HDOptical In
SD/HDOptical Out
OptionOption
Option
FormatDetector
Key FeaturesEight-output SD-SDI or HD-SDI reclocking •distribution amplifier
Fiber-ready architecture supports up to •two optional connections— 100% DVB ASI compliant— High connectivity density: eight coaxial
outputs and fiber option
Remote control and monitoring via •Ethernet frame interface
ApplicationsDistributing HD signals or SD/HD in •rate-agile installations
Installations that will upgrade to HD•
Combining SD, HD, or ASI distribution with •long-distance, isolating fiber connection
As a fiber receiver or transmitter in single-•channel-per-module applications
The 8947RDA-FR is a dual SD/HD reclocking distribution amplifier, with automatic format detection. It provides eight reclocked outputs and can equalize up to 125 meters of Belden 1694A cable for HD-SDI. It can be used to distribute either SD-SDI or HD-SDI signals, making it ideal for mixed-format applications or installations where an upgrade is planned.
Supporting up to two fiber connections, this module is ready for either fiber-in or fiber-out applications. It can also distribute eight non-inverted DVB ASI outputs, making it ideal for receiving signals from distant downlinks or transmitting to remote uplinks.
8947RDA-FR Fiber-Ready SD/HD Reclocking DA
Supported Frame TypesGeckoFlex frame
Power Rating4.1 Watts – single slot
InputsSD/HD-SDI: •Inputequalization:upto125mHD-SDI,
up to 330m SD-SDI (Belden1694A)•Returnloss:>15dB0.004to1.5GHz
Optical: Single-mode (optional)
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94 (NTSC) 576i @ 50 (PAL-B)
DVB ASI: Yes
OutputsSD/HD-SDI:Eightoutputs•Returnloss:>15dB,5to270MHz; >10dBto1.5GHz
•Signallevel:SDI800mVp-p±10%•Outputjitter:forinputwith<0.1UIjitter,theoutputjittercomplieswiththeSMPTE259M&292Mstandards
Optical: Single-mode (optional)
DVB ASI:Eightnon-invertedoutputs
PerformanceElectrical length: <10ns(reclockingenabled) <5ns(reclockingbypassed)
DistributionEqualizing: Active/bypass
Reclocking: Active/bypass
Manual input selection: Coax In, fiber 1, fiber 2 (with optional fiber input option)
Input format selection: Automatic/manual
Control and MonitoringSNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames.
8947RDA-FRSD/HD re-clocking distribution amplifier – fiber ready (front and rear module set)
SFP-13103G-M1DRXDual input fiber receiver. Suits one-signal-per-fiber and CWDMfibersystems
SFP-13103G-M1DTXDual output fiber transmitter. For one-signal-per-fiber systems
SFP-13103G-M2TRXFiber transceiver. For one-signal-per-fiber systems
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Ordering InformationSpecifications
8949MDA-CXF PAL/NTSC Monitoring Distribution Amplifier
Key FeaturesReclocked distribution of SD or HD-SDI •signals for reconstructed input fan-out
PAL/NTSC monitoring output with aspect •ratio controls for HD inputs
Distributes both SD-SDI and HD-SDI with •automatic format detection for flexible future-proof system architectures
Provides SD monitoring output whether •input is SD or HD
Very high-density solution•
Accepts optional fiber transmitter to •provide optical, HD-SDI, and PAL/NTSC monitoring outputs for combined local/ remote systems
Configurable as fiber receiver with four •HD-SDI outputs and PAL/NTSC monitoring
ApplicationsWhere an PAL/NTSC monitoring feed is •required
HD-SDI distribution alongside monitoring •in PAL or NTSC
Rate-agile systems requiring distribution •and a consistent composite monitoring feed
A fiber receiver with composite monitoring•
A fiber transmitter with local HD and •composite monitoring feeds
Supported Frame TypesGeckoFlex frame
Power Rating7.3 Watts – single slot without fiber optic submodule
8.0 Watts – single slot with fiber optic submodule
InputsSD/HD-SDI:•Inputequalization:upto125mHD-SDI,
up to 330m SD-SDI (Belden1694A)•Returnloss:>15dB0.004to1.5GHz
Optical: Single-mode (optional)
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94 (NTSC) 576i @ 50 (PAL-B)
OutputsSD/HD-SDI: Four outputs•Returnloss:>15dB,5to270MHz;
>10 dB to 1.5 GHz•Signallevel:SDI800mVp-p±10%•Outputjitter:forinputwith<0.1UIjitter,theoutput
jitter complies with the SMPTE 259M & 292M standards
Optical: Single-mode (optional)
Analog video: Four outputs (75Ω)•Formats:SMPTE170M(NTSC),CCIR624(PAL-B)•Returnloss:>40dBto10MHz
•Signallevel:SDI800mVp-p±10%•Outputjitter:forinputwith<0.1UI
Electrical Length (Delay)<0.97 ms
Conversion8 bits representationType: Field-based high speed monitoring to drive 16:9 monitors
Input formats: 59.94 Hz, 1080i @ 59.94 Hz, 720p @ 59.94 Hz, 480i @ 59.94 Hz•Tooutputformat:[email protected]
Input formats: 50 Hz, 1080i @ 50 Hz, 720p @ 50 Hz, 576i @ 50 Hz•Tooutputformat:576i@50Hz
Manual input selection: Coax In, fiber 1, fiber 2 (with optional fiber input)
Input format selection: Automatic/manual
Control And MonitoringSNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames.
8949MDA-CXFSD/HD monitoring distribution amplifier PAL/NTSC output – fiber-ready front and rear module set. Fiber optic kit option includes fiber optic submodule, mounting bracket, and fiber cable assembly for mounting on the module circuit board.
SFP-13103G-M1DRX-KDual input fiber receiver kit. For one-signal-per-fiber and CWDM fiber systems
SFP-13103G-M1DTX-KDual output fiber transmitter kit. For one-signal-perfiber systems
SFP-13103G-M1TRX-KFiber transceiver kit. For one-signal-per-fiber systems
Please note that the 8949MDA-CXF provides 16:9 anamorphic monitoring outputs for HD signals and 4:3 outputs for SD inputs. You should use the 8949MDA-SXF for SDI outputs. To provide the fastest possible conversion, this module does not perform deinterlacing and consequently it has an extremely short processing delay of 0.97 ms.
J1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI In
PAL/NTSCOut
PAL/NTSCOut
PAL/NTSCOut
PAL/NTSCOut
Fiber I/OConnector
8900WFR-XFR
SD/HDSDI In Equalizer and
Re-clocker
Only one fiberoption may beselected
Fiber RX
Fiber RX
Fiber RX
Fiber TX
Fiber TX
Fiber TX
SD/HDOptical In
SD/HDOptical Out
OptionOption
Option
Down-converter Encoder
Aspect RatioControl
AutoFormatDetction
4X SD/HD-SDIOut
4X PAL/NTSCOut
The 8949MDA-CXF is a monitoring distribution amplifier with PAL/NTSC monitoring outputs. This module is ideal for low-cost monitoring of HD-SDI signals. It provides four monitoring coax outputs and four reclocked coax outputs and can be used to distribute either SD-SDI or HD-SDI making it ideal for mixed format applications or installations where an upgrade is planned. Aspect ratio controls are active on the downscaled outputs with an HD input signal.
With its fiber-ready architecture, the 8949MDA can use one of three types of fiber optic submodule options. With a dual transmitter fiber option installed, two fiber outputs are provided in addition to the eight coax outputs. Applications include use as an HD-SDI fiber transmitter with additional monitoring and reclocked coax feeds. Or the module can have a dual receiver (two fiber inputs) or a transceiver (one fiber input and one fiber output.
Parameters can be adjusted with onboard controls or via standard HTML Web browsers or via the Newton control panel (when installed in network-equipped frames). In addition NetConfig and NetCentral can be used for remote configuration and signal health monitoring.
This is a monitoring device so, in order to provide the fastest possible conversion, the module does not perform de-interlacing and consequently it has an extremely short processing delay of 0.97 ms.
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
39
Specifications Ordering Information
40
J1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI Out
SD/HDSDI In
SD SDIOut
SD SDIOut
SD SDIOut
SD SDIOut
Fiber I/OConnector
8900WFR-XFR
SD/HDSDI In Equalizer and
Re-clocker
Only one fiberoption may beselected
Fiber RX
Fiber RX
Fiber RX
Fiber TX
Fiber TXSD/HD
Optical In
SD/HDOptical Out
OptionOption
Option
Down-converter
Aspect RatioControl
AutoFormat
Detection
Fiber TX
4X SD/HD-SDIOut
4X SD-SDIOut
8949MDA-SXF SDI Monitoring Distribution Amplifier
Key FeaturesReclocked distribution of SD or HD-SDI •signals for reconstructed input fan-out
SD-SDI monitoring•
Can distribute both HD-SDI and SD-SDI •with automatic format detection for flexible future-proof system architectures
Provides SD monitoring output whether •input is SD or HD
Very high-density solution•
Accepts optional fiber transmitter to •provide optical, HD-SDI, and SD-SDI monitoring outputs for combined local/ remote systems
Configurable as fiber receiver with four •HD-SDI outputs and SD-SDI monitoring
High-quality downscaled signals with new •EDH CRC packet generated on outputs
ApplicationsWhere an SD-SDI monitoring feed is •required
HD-SDI distribution alongside SD-SDI •monitoring
Rate-agile systems requiring consistent •SD feed monitoring
A fiber receiver with SD monitoring•
A fiber transmitter with local SD and HD •monitoring feeds
Supported Frame TypesGeckoFlex frame
Power Rating8.1 Watts – single slot without fiber optic submodule
8.8 Watts – single slot with fiber optic submodule
InputsSD/HD-SDI:•Inputequalization:upto125mHD-SDI,
up to 330m SD-SDI (Belden1694A)•Returnloss:>15dB0.004to1.5GHz
Optical: Single-mode (optional)
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94 (NTSC) 576i @ 50 (PAL-B)
OutputsSD/HD-SDI: Four outputs•Returnloss:>15dB,5to270MHz;
>10 dB to 1.5 GHz•Signallevel:SDI800mVp-p±10%•Outputjitter:forinputwith<0.1UIjitter,theoutput
jitter complies with the SMPTE 259M & 292M standards
SD-SDI: Four outputs•Returnloss:>15dB,5to270MHz•Signallevel:SDI800mVp-p±10%•Outputjitter:forinputwith<0.1UIjitter,theoutput
jitter complies with the SMPTE 292M standards
Electrical Length (Delay)<0.95 ms
Conversion10 bits representation
Type: Field-based high-speed monitoring to drive 16:9 monitors
Input formats 59.94 Hz: 1080i @ 59.94 Hz, 720p @ 59.94 Hz, 480i @ 59.94 Hz•Tooutputformat:[email protected]
Input formats 50 Hz: 1080i @ 50 Hz, 720p @ 50 Hz, 576i @ 50 Hz•Tooutputformat:576i@50Hz
Manual input selection: Coax In, fiber 1, fiber 2 (with optional fiber input)
Input format selection: Automatic/manual
Control and MonitoringSNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
The 8949MDA-SXF is a monitoring distribution amplifier with SD-SDI monitoring outputs. This module is ideal for low-cost monitoring of HD-SDI signals. The 8949MDA provides four monitoring outputs and four reclocked outputs and can be used to distribute either SD-SDI or HD-SDI making it ideal for mixed format applications or installations where an upgrade is planned. Aspect ratio controls are active on the downscaled outputs with an HD input signal.
With its fiber-ready architecture the 8949MDA can be configured to support up to two fiber connections in addition to its eight coax outputs. Applications include use as an HD-SDI fiber transmitter with additional monitoring and reclocked coax feeds. Or the module can have a dual receiver (two fiber inputs) or a transceiver (one fiber input and one fiber output).
All parameters can be adjusted directly from the module itself or via standard HTML Web browsers or via the Newton Control Panel (when installed in network-equipped frames). In addition NetConfig and NetCentral can be used for remote configuration and signal health monitoring.
This is a monitoring device so, in order to provide the fastest possible conversion, the module does not perform de-interlacing and consequently it has an extremely short processing delay of 0.95 ms.
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames.
8949MDA-SXFSD/HD monitoring distribution amplifier SDI output – fiber ready front and rear module set. Fiber optic kit option includes one fiber optic submodule, mounting bracket, and fiber cable assembly for mounting on the module circuit board.
SFP-13103G-M1DRX-KDual input fiber receiver kit. For one-signal-per-fiber and CWDM fiber systems
SFP-13103G-M1DTX-KDual output fiber transmitter kit. For one-signal-per-fiber systems
SFP-13103G-M1TRX-KFiber transceiver kit. For one-signal-per-fiber systems
Please note that the 8949MDA-SXF provides 16:9 anamorphicmonitoring outputs for HD signals and 4:3 outputs for SD inputs.You should use the 8949MDA-CXF for composite outputs. Toprovide the fastest possible conversion, this module does notperform de-interlacing and consequently it has an extremely short
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
The 8900FSS is a low-cost solution to digital system timing. Full frame synchronization and delay are available by connecting the 8900FSS to a host module such as the 8960DEC decoder or 8960ENC encoder. All user controls are resident on the host module and include output phasing/delay and freeze frame options. It operates as a companion to the popular 8916AES autotracking delay DA, and 8920ADT and 8921ADT for audio synchronization applications. The 8900FSS requires less than 2.5W so that, even when coupled to the 8960DEC/8960ENC, up to ten host/sub-modules can be accommodated in the 8900 frame when the front cover fan is installed.
All possible adjustments to this card can be performed directly on the host module. When the 8900NET (Net Card) module is installed in the frame, you gain immediate access to remote control and monitoring.
Inputs fromHost Module
Outputs to Host Module
10-bit 10-bit
Delay
525 Ref.
625 Ref.
Controls
Read & Write Control
Reference Selector
LPFSync
Separator
FrameStore &Demux
FPGA
41
Key Features10-bit signal processing•
Full frame output phasing for total control •of output timing
Compatible with 8960DEC and 8960ENC•
Outputs RS-232 serial audio delay control •signal
Offers up to full frame of delay•
Black or freeze on loss of video•
Supported Frame TypesGeckoFlex Gecko Video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating2.5 Watts – single slot
InputSignal type: 10-bit parallel 4:2:2 component video
Connector type: 40-pin connector to host module
Reference InputNumber of inputs: Two
Signal type: SMPTE 170M (525 lines) or CCIR624 (625 lines)
Connector type: 40-pin connector to host module, selectable High Z or 75Ω for external reference signal looping
OutputSignal type: 10-bit parallel 4:2:2 component video
Connector type: 40-pin connector to host module
PerformanceSignal path: 10-bit
Phasing/delay: One video frame
Phase/delay increment: 37 ns
Minimum delay: 1.5 µs
Operating temperature: 0° to 45°C ambient
Relative humidity: 0% to 90% non-condensing
Indicators and ControlsUser controls: Horizontal phase/delay, vertical phase/delay, freeze mode
Remote: All controls
This submodule can be mounted on a module in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8900FSS4:2:2 frame synchronizer/delay submodule
8900FSS 4:2:2 Frame Synchronizer/Delay Submodule
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
42 8900GEN-SM GeckoFlex Reference Input Submodule
The 8900GEN-SM submodule attaches to a synchronizer module and provides a reference input for: •Thehostsynchronizermodule•OtherGeckoFlexmodulesviatheframereferencebus(ifthemoduleismountedinslot1orslot3)
A second submodule attached to another GeckoFlex host module can provide a redundant frame reference or a reference of a completely different signal format.
NOTE: At least one module per frame must have a genlock submodule installed to provide reference bus support.
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Genlock Reference Supported Formats:•NTSC29.97HzandPAL25Hzcolorblack(black
and burst)•1080i59.94Hztri-levelsync•720p59.94Hztri-levelsync•1080i50Hztri-levelsync•720p50Hztri-levelsync•1080p24Hztri-levelsync•1080sf24Hztri-levelsync•AES48kHzsignalandAES96kHzsignals•WordClock48kHzandWordClock96kHz
Power Rating0.7 Watts – single slot
8900GEN-SMReference input submodule. This submodule mounts to the synchronizer to provide reference input for the frame reference bus. It is not required for 8985PRC module operation.
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900V-R
SDIInput 1
SDIInput 2
SDIInput 3
SDIInput 4
ReferenceInput
Loopthru
SDIOutput 1
SDIOutput 2
SDIOutput 3
SDIOutput 4
SDI 1 Timing
Timing
Timing
Timing
SDI In
SDI In
SDI In
SDI In
ReferenceLoopingReference Input
SDI 2
SDI 3
SDI 4
SDI 1VBI
VBI
VBI
VBI
SDI 2
SDI 3
SDI 4
43
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8964FS Four-channel SDI frame synchronizer
The 8964FS provides a very compact and low-cost alternative to the 8981FS by providing four complete SDI frame synchronizers. Using the latest technology enables the 8964FS to achieve unsurpassed density, providing 40 full featured frame synchronizers in just 2 RU. This module can also operate in a fixed delay mode with no reference required. In either mode, the output can be phased relative to input or reference up to one frame in increments of 37 ns. All adjustments can be performed on the module’s card edge controls. The on-screen display capability greatly simplifies card-edge configuration.
Key FeaturesFour 270 Mb/s frame synchronizers•
One output per input•
Looping color black reference input•
Automatic 525/625 lines selection •
Output timing locked to reference input •and adjustable in 37 ns steps over a full frame
Passes or blanks horizontal ancillary data •(HANC)
Passes or blanks vertical interval ancillary •data (VANC)
Monitors its input signals for EDH errors•
Inserts new EDH on output•
Hot swappable•
Freeze mode •
On-screen display simplifies local •configuration and control
Compatible with Ethernet-based Newton •control system
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating8 Watts – single slot
InputsNumber of inputs: Four, one for each synchronization path
Signal type: SMPTE 259M, 10-bit, 270 Mb/s serial component digital
Connector: Terminating 75Ω BNC
Return loss: >15 dB to 270 MHz
Reference InputNumber of inputs: One NTSC/PAL
Signal type: Color Black, SMPTE 170M (525 lines) or CCIR624 (625 lines)
Return loss: >36 dB to 5 MHz
OutputNumber of outputs: Four, one for each synchronizer
Signal type: SMPTE 259M, 10-bit, 270 Mb/s serial component digital
Connector: Terminating 75Ω BNC
Return loss: >15 dB to 270 MHz
PerformanceSignal path: 10-bit
Error detection and insertion: EDH
Min. electrical length (delay mode): •525lines:5lines+55.22µs•625lines:4lines+55.90µs
Output timing range: One frame
Output timing resolution: 37 ns
Operating temperature: 0° to 45°C
Operating humidity range: 0% to 90% non-condensing
Indicators and ControlsIndicators: Input video present, reference present, communication active, power, fault
Controls: Vertical blanking, sync/delay modes, test signal, EDH, OSD
Remote: All indicators and controls via Ethernet
8964FS Four-Channel SDI Frame Synchronizer
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900V-R
SDIOutput
DelayControlOutput
SDIInput GPI
Reference input
Loopthru
DelayControlOutput
SDIOutput
ReferenceLoopthrough
SDI with Embedded Audio
EDHDetection
TimingGenerator
EDHInsertion
AudioDelayData
SDIwithEmbeddedAudio
LocalControls
GPI
Micro-processor
Ethernet
LED
Control
Framestore
OutputSignal
Processor
44
The 8981FS offers unparalleled functionality. It combines the best features of a frame synchronizer, frame delay, and digital processing amplifier in one module. The 8981FS is designed to handle various environments and applications including asynchronous input video signal timing, manual color correction, and production freeze frame applications. It operates as a companion to the popular 8916 AES autotracking delay DA, and 8920ADT or 8921ADT for audio synchronization applications. Several control modes are also offered, including local board controls, GPI for freeze control, and Ethernet control over a LAN/WAN using a variety of user friendly interfaces.
Key Features10-bit signal processing assures •broadcast quality
Proc. amp controls •
Various freeze options for production •applications
Audio delay signal to drive audio delay •cards
Functions as frame synchronizer or fixed •delay
Up to a full frame of delay •
Cleanly handles input signal hot switches •
Passes all horizontal ancillary data (AES)•
Passes or blanks vertical interval data •user adjustable
EHD detection and insertion•
Complete remote control with GPI or •Ethernet interface
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating4.5 Watts – single slot
InputSignal type: SMPTE 259M-C or EBU 3267 (270 Mb/s)
Connector: 75Ω BNC, terminating
Automatic cable eq.: <300 meters
Return loss: >15 dB, 5 to 270 MHz
Reference InputSignal type: Analog color black 525 or 625 lines per SMPTE 170M or CCIR 624
Connector: Differential loop-through BNC
Signal level: Sync level 140 mV to 560 mVp-p
Return loss: >40 dB to 5.5 MHz
OutputSignal type: SMPTE 259M-C or EBU 3267
Number of outputs: Four
Connector: 75Ω BNC
Return loss: >15 dB, 5 to 270 MHz
Audio Delay DataNumber of outputs: Two
Connector: BNC
Type: RS-232 serial data
PerformanceSignal path: 10-bit
Error detection and insertion: EDH
Switching line processing: Optional black insertion
Min. electrical length (delay mode): Two lines
Output timing range: One frame
Output timing resolution: 37 ns
Operating temperature: 0° to 45°C
Operating humidity range: 0% to 90% non-condensing
Indicators and ControlsIndicators: Signal present, line rate, reference present, freeze mode, delay mode, fault, communication active, configuration
Controls: Output timing, proc. amp controls, freeze, blanking, sync/delay mode
GPI control: Freeze
Remote: All indicators and controls via Ethernet
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8981FSSDI frame synchronizer/delay
8981FS SDI Frame Synchronizer/Delay
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900V-R
VideoOutput
VideoInput
VideoOutput
NotUsed
NotUsed
NotUsed
NotUsed
NotUsed
EDHDetection
Test Generators
SDIOutput
Micro-processor
Control
LED
Framestore
Ethernet
NoiseFilters
LocalControls
SDI Input
45
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8981NR270 Mb/s SDI video noise reducer module
The 8981NR is a 270 Mb/s SDI component digital noise reducer module. This module incorporates two different noise reduction methods that are targeted at different sources of noise. A recursive filter is effective for low levels of wide-band (random) variations that have no frame-to-frame correlation, and a horizontal median filter is very effective for impulse noise.
Typical applications include reduction of random noise generated during analog transmission or digital processing. Signals from various sources with varying amounts of noise resulting from poor transmission and processing will greatly benefit from using this product by reducing the bandwidth required later during the MPEG compression process.
Key Features10-bit signal processing•
Recursion filter for random noise •reduction
Horizontal median filtering for impulse •noise reduction
Split screen mode with internal noise •generator for setup purposes
Video processing adjustments including •video gain and black level
Setting stored in non-volatile memory•
Output EDH generated•
VANC pass or blank•
Passes all HANC data •
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating4.5 Watts – single slot
SDI InputConnector: BNC
Input impedance: 75Ω terminating
Signal type: SMPTE 259M serial 10-bit 4:2:2 component video
Return loss: >15 dB up to 270 MHz
SDI OutputConnector: 4X BNC
Signal type: SMPTE 259M
Output impedance: 75Ω
Return loss: >15 dB, 5 to 270 MHz
Error checking: EDH embedded
Environmental ConditionsOperating ambient temperature (frame): 0° to 45°C
Operating humidity range: 0% to 90% non-condensing
8981NR 270 Mb/s SDI Noise Reducer Module
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
46
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
VideoOutput
NotUsed
SDIInput
GPIGPI
Loopthru
OutputOutput
8900V-R
ReclockerReclocker
SDIOutputs
Micro-processor
Filter
GPI
TimingGenerator
Ethernet
FrameMemory
LocalControls
SDI InputLoopthrough
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear module.
8990ARCSDI aspect ratio converter
The 8990ARC addresses the need to convert between standard and widescreen formats resulting from various DTV standards worldwide. Flexible aspect ratio control is offered whether you’re starting with 4:3 or 16:9. GPI control allows the selection of several predetermined aspect ratio modes while local or remote control, via the Ethernet interface, provides more complete aspect ratio control. Additional control modes include WSS widescreen signaling and video index data embedded in the SDI video stream.
Key FeaturesSDI 270 Mb/s I/O•
Operates at 50 and 59.94 Hz•
Converts between 4:3 and 16:9 aspect •ratios
Various aspect ratio modes with •controllable crop location
Simple GPI remote control via BNC•
Supports networked control and •monitoring
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating6.5 Watts – single slot
InputSignal type: SMPTE 259M-C, EBU 3267-E
Connector: Differential loop-through BNC
Supported data rate: 270 Mb/s
Return loss: >15 dB up to 270 MHz
Cable equalization: <225 meters
OutputSignal type: SMPTE 259M-C, EBU 3267-E
Number of outputs: Four
Connector: 75Ω BNC
Return loss: >15 dB (up to 270 Mb/s)
PerformanceSignal path processing: 12-bit 16:9 to 4:3
Conversion mode: •Letterbox:fullheight,14:9sub-image•4:3to16:9conversionmode:sidepanels,fullwidth,
14:9 sub-image
EDH insertion: WSS and VID
Reclocking data rates: 270 Mb/s
Delay: 75 lines
Operating temperature: 0° to 45°C
Humidity: 10% to 90% non-condensing
Indicators and ControlsIndicators: Video present, aspect ratio mode, fault, power, communication active, configuration, remote override
Controls: Aspect ratio mode, vertical and horizontal position
Remote: All indicators and controls via Ethernet
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
8990ARC SDI Aspect Ratio Converter
Specifications Ordering Information
478985FS SD/HD Video Frame Synchronizer
The 8985FS is a compact, high-performance, fiber-ready SD/HD frame synchronizer module with low hysteresis, a dual-redundant reference capability, and a perfect-picture mode. This module is therefore suited to production and playout applications where high reliability is required.
The 8900GEN-SM submodule provides a dual-redundant reference to ensure continuous glitch-free operation even when the incoming reference signal fails. Perfect-picture mode prevents damaged frames and picture stutter from appearing when the incoming feed fails.
Fiber-ready technology allows this module to accept one of three types of SFP fiber optic submodules. One of these can be installed in the fiber optic rear cage connector to provide two fiber inputs (Dual Receiver), two fiber outputs (Dual Transmitter), or one fiber input/one fiber output (Transceiver).
The 8900NET (Net Card) module is required for Web browser or Newton control panel configuration. In addition, NetConfig and NetCentral can be used for remote configuration and SNMP signal health monitoring.
Refer to the rear module pinout and block diagram on the next page.
Key FeaturesHD/SD frame synchronizer •
Operates in frame sync and delay modes •with user-programmable delay, plus a framing delay from 300 pixels up to eight frames minus 5 lines in pixel-sized steps
Supports genlock submodule to manage •reference timing (required for frame sync operation)
Genlock submodule supports Tri-level sync •and NTSC/PAL color black and loop-through
Split screen mode for in/out comparison•
Accepts an optional fiber transmitter, fiber •receiver, or fiber transceiver SFP device providing optical HD-SDI and SD-SDI I/O
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating8.0 Watts – single slot
InputsSD/HD-SDI: One electrical or optional fiber optic•Inputequalization:upto125m•Auto-sensing:Yes
Optical: Single-mode (optional)
Formats supported:[email protected],50; 1080p@24,1080sf@24;[email protected],50; [email protected];576i@50
OutputsSD/HD-SDI: Four electrical and up to two additional optional fiber optic •Returnloss:>15dB,5to270MHz;
>15 dB typical, to 1.5 GHz•Signallevel:SDI800mVp-p±10%•Rise/falltime(20–80%):140pstypicalforHD,
500 ps typical for SD •Outputjitterinframesyncmode,lowjitterapplied: <0.2 UI HD >100 kHz <1.0 UI HD 10 Hz >100 kHz <0.2 UI SD >1 kHz
Optical: Single-mode (optional)
Electrical Length (delay)Fixed delay mode: Nominal: 1 frame (±1 pixel) User-adjustable range: 1 frame minus 5 lines to 2 frames minus 5 lines
Synchronizing mode (asynchronous input): Minimum: 1 frame minus 5 lines Maximum: 2 frames minus 5 lines
Fixed delay mode = in minimum delay mode: Nominal: 300 pixels (±1 pixel) User-adjustable range: 300 pixels to 1 frame minus 5 linesSynchronizing mode = in minimum delay mode (synchronous input): Nominal: 300 pixels (±1 pixel) User-adjustable range: 300 pixels to 1 frame minus 5 linesAdditional adjustable delay: 0 to 6 additional frames
SynchronizingGenlock (reference signal):The 8900GEN-SM submodule is required for genlocking GeckoFlex modules with frame sync.
The 8900GEN-SM submodule attaches to the front module and provides genlock reference support to:• Host synchronizer module•Hostsynchronizermoduleandoneoftwoframe
reference buses•OtherGeckoFlexmodulesviatheframereference
bus
A second submodule attached to another GeckoFlex module can provide redundant frame reference or a different signal format. (NOTE: at least one module per frame must have a genlock submodule installed to provide reference bus support).
Reference signal to timing pulse edge: Adjustable from 0 to 1 frame in 1 SD pixel steps.
Control And MonitoringSNMP: YesWeb page configuration: YesLocal configuration: NoNewton support: YesNetConfig support: YesNetCentral support: Yes
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames. As this module has no card-edge controls, an 8900NET (Net Card) Network Interface module is required to configure the module.
8985FSSD/HD frame synchronizer (front and rear module set)
8900GEN-SMGenlock submodule. This submodule mounts to the front module to provide reference input for the module and frame reference bus. This is required for frame synchronizing operation
SFP-13103G-M1TRXFiber transceiver. Low-power 1310 nm single-mode optical transceiver submodule (one fiber input/one fiber output)
SFP-13103G-M1DTXDual fiber transmitter. Dual low-power 1310 nm single-mode optical transmitter submodule
SFP-13103G-M1DRXDual fiber receiver. Dual low-power 1310 nm single-mode optical receiver submodule
ApplicationsWith asynchronous sources where SD-SDI •and HD-SDI line or frame synchronization is required
With synchronous sources to compensate •for cable or processing delays
When a video signal needs timing •adjustment to match other sources
With live signals where minimum delay is •important
8900GFR-RJ1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
GenlockIn
GenlockLoop Out
Out
Out
In
Auto TrackDelay
Auto TrackDelay
Out
Out
Fiber I/OConnector
48 8985FS SD/HD Video Frame Synchronizer
Fiber RX
Fiber RX
Fiber RX
Fiber TX
Fiber TX
Only one fiber option can be
installed
4X SD/HD-SDIOut
SD/HDFiber In 1
SD/HDFiber In 1
SD/HDFiber In 2
SD/HDSDI In
Frame Bus 2Frame Bus 1
Ref In
Loop
SD/HDFiber Out 2
SD/HDFiber Out 2
SD/HDFiber Out 1
SFP Fiber Optic Dual Receiver
Option
SFP Fiber Optic Transceiver Option
SFP Fiber Optic Dual Transmitter
Option
Equalizer
Genlockadjustment
Synchronizer
Fiber TX
8900GEN-SMSubmodule
Option
Specifications
Specifications Ordering Information
498985FSP SD/HD Frame Synchronizer w/Proc. Amp & Color Corrector
Key FeaturesSD/HD frame synchronizer with proc. amp•
RGB color correction for adjusting gain, •offset, and gamma
Video proc. amp controls for adjusting •component gain, offset, and color saturation and Y/C white and Y black clipping levels
Split screen mode for in/out comparison•
Fiber-ready design supports upgrade to •optical receiver/transmitter/or transceiver
Select between coaxial input and up to •two optional fiber inputs
Operates in frame-sync or delay modes, •with programmable delay
Accepts reference input submodule for •local reference input or feeding reference buses
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating8.0 Watts – single slot
InputsSD/HD-SDI: One electrical or optional fiber optic•Inputequalization:upto125m•Auto-sensing:Yes
Optical: Single-mode (optional)Formats supported:[email protected],50; 1080p @ 24, 1080sf @ 24;[email protected],50; [email protected];576i@50
OutputsSD/HD-SDI: Four electrical and up to two additional optional fiber optic•Returnloss:>15dB,5to270MHz; >15 dB typical, to 1.5 GHz•Signallevel:SDI800mVp-p±10%•Rise/falltime(20-80%):140pstypicalforHD,
500 ps typical for SD •Outputjitterinframesyncmode,lowjitterapplied: <0.2 UI HD >100 kHz <1.0 UI HD 10 Hz >100 kHz <0.2 UI SD >1 kHz <0.2 UI HD 10 Hz >1 kHz
Optical: Single-mode (optional)
Electrical Length (delay)Fixed delay mode: Nominal: 1 frame (±1 pixel) User-adjustable range: 1 frame minus 5 lines to 2 frames minus 5 lines
Synchronizing mode (asynchronous input): Minimum: 1 frame minus 5 lines Maximum: 2 frames minus 5 lines
Fixed delay mode = in minimum delay mode: Nominal: 300 pixels (±1 pixel)
User-adjustable range: 300 pixels to 1 frame minus 5 lines
Synchronizing mode = in minimum delay mode (synchronous input): Nominal: 300 pixels (±1 pixel) User-adjustable range: 300 pixels to 1 frame minus 5 lines
Additional adjustable delay: 0 to 6 additional frames
RGB Color CorrectionRGB range 0% to 200% in 1% steps: R gain, Ggain,Bgain;totalgain(controlsall3atonce)
RGB offset range 0% to 100% in 1% steps: R offset, Goffset,Boffset;RGBoffset(controlsall3atonce)Gamma correction range 0.25 to 4.00 in .01 steps: R, G, and B gamma correction or RGB total gamma correction
Proc. AmpGain Range: 0% to 200% in 1% steps: Y gain, color saturation, total gain (controls Y gain and color saturation together), Cb gain, Cr gain
Offset Range: 100% to 100% in 1% steps: Cb offset, Cr offset, Y offsetClip Range: 50 to 109%: Y/C White clip level, and -7 to 50%: Y Black clip levelHue Range: -180° to 179° in 1° steps
Synchronizing (Genlock reference signal):The 8900GEN-SM submodule is required for genlocking GeckoFlex platform modules
Control And MonitoringSNMP: Yes
Web page configuration: Yes
Local configuration: No
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
The 8985FSP is a fiber-ready, compact SD/HD frame synchronizer module with a video proc. amp capability, including RGB and component color correction. With the same low-hysteresis synchronizer, perfect-picture mode, and redundant-reference feature as the 8985FS, this module is suited to production and playout applications where synchronization needs to be combined with comprehensive video signal control.
The minimum delay while synchronizing is 300 pixels, which makes this unit ideal for live applications. The SD/HD capability is ideal for installations that will be upgraded or that have to handle both rates. Embedded audio including Dolby E is passed through but not processed.
Fiber-ready technology allows this module to accept one of three types of SFP fiber optic submodules. One submodule option can be installed in the fiber optic rear cage connector to provide two fiber inputs (Dual Receiver), two fiber outputs (Dual Transmitter), or one fiber input/one fiber output (Transceiver).
The 8900NET (Net Card) module is required for Web browser or Newton control panel configuration and NetConfig and NetCentral control and SNMP signal health monitoring.
Refer to the rear module pinout and the block diagram on the next page.
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames. As this module has no card-edge controls, an 8900NET (Net Card) Network Interface module is required to configure the module.
8985FSPSD/HD frame synchronizer with proc. amp, front and rear module set
8900GEN-SMGenlock submodule. This submodule mounts on the front module to provide reference input for the module and frame reference bus. This is required for frame synchronizing operation
SFP-13103G-M1TRXFiber transceiver. Low-power 1310 nm single-mode optical transceiver submodule (one fiber input/one fiber output)
SFP-13103G-M1DTXDual fiber transmitter. Dual low-power 1310 nm single-mode optical transmitter submodule
SFP-13103G-M1DRXDual fiber receiver. Dual low-power 1310 nm single-mode optical receiver submodule
ApplicationsSynchronization of SD-SDI or HD-SDI •signals from asynchronous sources
Compensation of cable or processing •delay from synchronous sources
Timing video signals before routing or •switching and after routing
Low-latency synchronization for latency-•critical live broadcasts
Video signal color processing to correct •or match other sources
50 8985FSP SD/HD Frame Synchronizer w/Proc. Amp & Color Corrector
8900GFR-RJ1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
GenlockIn
GenlockLoop Out
Out
Out
In
Auto TrackDelay
Auto TrackDelay
Out
Out
Fiber I/OConnector
Fiber RX
Fiber RX
Fiber RX
Fiber TX
Fiber TX
4X SD/HD-SDIOut
AutoTrackingDelay
SD/HDFiber In 1
SD/HDFiber In 1
SD/HDFiber In 2
SD/HDSDI In
Frame Bus 2Frame Bus 1
Ref In
Loop
SD/HDFiber Out 2
SD/HDFiber Out 2
SD/HDFiber Out 1Only one fiber
option can be installed
SFP Fiber Optic Transceiver Option
SFP Fiber Optic Dual Receiver
Option
SFP Fiber Optic Dual Transmitter
Option
EqualizerRGB VideoProc. Amp
ComponentVideo
Proc. Amp
Genlockadjustment
Synchronizer
Fiber TX
8900GEN-SMSubmodule
Option
Specifications Ordering Information
518985PRC SD/HD Video Processing Amplifier
Key FeaturesSD/HD video proc. amp•
Full proc. amp functions, including color •correction
Video gain, chroma gain, and black-level •control
Phase control (hue)•
Individual component controls (Y, Cr, Cb)•
Individual RGB gain, offset, and gamma •controls
Overall gain, offset, and gamma controls•
Split screen mode for in/out comparison•
Accepts an optional fiber transmitter, •receiver, or transceiver SFP device providing optical HD-SDI and SD-SDI I/O
Intuitive Web browser configuration and •SNMP monitoring
Supports Newton control panels for •on-the-fly facility operation
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating8.0 Watts – single slot
InputsSD/HD-SDI: One electrical or optional fiber optic•Inputequalization:upto125m•Auto-sensing:No
Optical: Single-mode (optional)
Formats supported: [email protected],50; 1080p@24,1080sf@24;[email protected],50; [email protected];576i@50
OutputsSD/HD-SDI: Four electrical and up to two additional optional fiber optic•Returnloss:>15dB,5to270MHz;
>15 dB typ, to 1.5 GHz•Signallevel:SDI800mVp-p±10%•Rise/falltime(20-80%):140pstypicalforHD,
500 ps typical for SD •Outputjitter,lowjitterapplied:
<0.2 UI HD >100 kHz <1.0 UI HD 10 Hz >100 kHz <0.2 UI SD >1 kHz
•Reclocked:Yes
Optical: Single-mode (optional)
Electrical Length (delay)HD modes: 104 pixels
SD modes: 90 pixels
Precision: ±1 pixel
RGB Color CorrectionRGB range 0% to 200% in 1% steps: R gain, G gain, B gain, total gain (controls all three at once)
RGB offset range 0% to 100% in 1% steps: R offset, G offset, B offset, RGB offset (controls all three at once)
Gamma correction range 0.25 to 4.00 in .01 steps: R gamma correction, G gamma correction, B gamma correction, total gamma correction
Proc. AmpRange 0% to 200% in 1% steps: Y gain, color saturation, total gain (controls Y gain and color saturation together), Cb gain, Cr gain
Range -100% to 100% in 1% steps: Cb offset, Cr offset, Y offset
Range -180° to 179° in 1° steps: Hue
Control And MonitoringSNMP: Yes
Web page configuration: Yes
Local configuration: No
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
The 8985PRC is a fiber-ready SD/HD-SDI video processing amplifier and color corrector. It is ideal for correcting camera feeds, in-vision monitor feeds, archive playback, or general proc. amp duties.
This full-featured proc. amp allows RGB color correction including gamma and component adjustments on either SD or HD video. The 8985PRC can also control hue, chroma, and luma similar to a traditional analog composite proc. amp. Combined with a Newton control panel, one or several channels of video can be controlled easily and precisely by an operator to make preliminary or even live adjustments to levels and colors. All the functions of this proc. amp are available in the 8985FSP frame synchronizer where proc. amp control needs to be combined with frame synchronization.
One of three types of optional SFP fiber optic submodules can be installed in the fiber optic rear cage connector to provide two fiber inputs (Dual Receiver), two fiber outputs (Dual Transmitter), or one fiber input and one fiber output (Transceiver).
All parameters are set via the standard HTML Web browsers or via the Newton control panel (when installed in network equipped frames). In addition, NetConfig and NetCentral can be used for remote configuration and SNMP signal health monitoring.
Refer to the rear module pinout and the block diagram on the next page.
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames. As this module has no card-edge controls, an 8900NET (Net Card) Network Interface module is required to configure the module.
8985PRCSD/HD Video Processing Amplifier, front and rear module set
SFP-13103G-M1TRXFiber transceiver. Low-power 1310 nm single-mode optical transceiver submodule (one fiber input/one fiber output)
SFP-13103G-M1DTXDual fiber transmitter. Dual low-power 1310 nm single-mode optical transmitter submodule
SFP-13103G-M1DRXDual fiber receiver. Dual low-power 1310 nm single-mode optical receiver submodule
ApplicationsColor correction for camera feeds in live •production
Color enhancement and level correction •for playback of archival material
Correction of previously digitized material •not properly color corrected at digitization
Color balancing of feeds to in-vision •monitors for neutral look
52
8900GFR-RJ1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
Not Used
Not Used
Out
Out
In
Not Used
Not Used
Out
Out
Fiber I/OConnector
Fiber RX
Fiber RX
SFP Fiber Optic Transceiver Option
SFP Fiber Optic Dual Receiver
OptionFiber RX
Fiber TXSFP Fiber Optic Dual Transmitter
Option Fiber TX
4X SD/HD-SDIOut
SD/HDFiber In 1
SD/HDFiber In 1
SD/HDFiber In 2
SD/HDSDI In
SD/HDFiber Out 2
SD/HDFiber Out 2
SD/HDFiber Out 1Only one fiber
option can be installed
Equalizer
Fiber TX
RGB VideoProc Amp
ComponentVideo
Proc Amp
8985PRC HD/SD Video Processing Amplifier
Ordering InformationSpecifications
53
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating and Size18 Watts – dual slot
InputsHD-SDI: One electrical or optional fiber optic•Inputequalization:upto125m•Auto-sensing:Yes•Returnloss:>15dB,5to270MHz;
>15 dB typical, to 1.5 GHz
Optical: Single-mode (optional)
OutputsSD-SDI: Four electrical and up to two additional optional fiber optic•Auto-sensing:yes•Returnloss:>15dB,5to270MHz;
>15 dB typical, to 1.5 GHz•Signallevel:800mVp-p±10%•Rise/falltime(20-80%):140pstypforHD,
500 ps typical for SD •Outputjitterinframesyncmode,lowjitterapplied:
< 0.2 UI p-p HD > 100 kHz < 1.0 UI p-p HD > 10 Hz
Optical: Single-mode (optional)
Electrical Length (delay)Fixed delay mode: Nominal: 2 frames (±1 pixel) User-adjustable range: 2 frames minus 5 lines to 3 frames minus 5 lines
Synchronizing mode (asynchronous input): Minimum: 2 frames minus 5 lines Maximum: 3 frames minus 5 linesFixed delay mode = in minimum delay mode: Nominal: 1 frame (±1 pixel) User-adjustable range: 1 frame to 2 frames minus 5 lines
Synchronizing mode = in minimum delay mode (synchronous input): Nominal: 1 frame (±1 pixel) User-adjustable range: 1 frame to 2 frames minus 5 linesAdditional adjustable delay: 0 to 6 additional frames
ConversionMethod: Motion adaptive
3:2/2:2 cadence: Automatic detection
Input: 1080i @ 59.94 Hz, 1080p @ 23.98, 1080sf @ 23.98, or 720p @ 59.94 Hz
Output choices: 480i @ 59.94 Hz
Input: 1080i @ 50 Hz or 720p @ 50 Hz
Output choices: 576i @ 50 Hz
Aspect Ratio ConversionConversion modes: 1:1, letterbox, pillarbox, anamorphic, 14:9
Synchronization (Genlock)•Standardframebusgenlockorexternalreferenceif
genlock submodule is installed (note at least one front module per frame must have genlock submodule)
•Adjustment:0to1framein1SDpixelsteps
Timecode and Closed CaptionVITC timecode and Closed Capiton HD to SD translation: for same frame rate and output line select for VITC and Closed Caption. NOTE: VITC and CC may not work accurately in 23.98 Hz 3:2 pulldown from higher frame rate conversion
Control And MonitoringSNMP: YesWeb page configuration: YesLocal configuration: NoNewton support: YesNetConfig support: YesNetCentral support: Yes
The 8995DNC is a compact, broadcast-quality fiber-ready downconverter. Conversion is of the highest quality, with pixel-adaptive motion processing. In addition, the 8995DNC provides the most robust signal handling with the low hysteresis synchronizer, redundant reference, and perfect-picture mode of the 8985FS.
It is fully featured with color-space conversion and a powerful video proc. amp, including RGB color correction with gamma and component adjustments with Y/C clip level adjustments.
Powerful embedded audio handling includes channel-level and Dolby E stream routing. PCM audio processing eliminates the clicks caused by the video synchronizer dropping or repeating frames. This module silences the effects of hot upstream video switching using a V-fade.
VITC and closed caption conversion are supported for same frame-rate downconversions, making this an ideal module for playout applications.
One of three types of optional SFP fiber optic submodules can be installed in the fiber optic rear cage connector to provide two fiber inputs (Dual Receiver), two fiber outputs (Dual Transmitter), or one fiber input and one fiber output (Transceiver).
Refer to the module pinout and block diagram on the next page.
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames. As this module has no card-edge controls and in order to configure this module an 8900NET (Net Card) Network Interface module is required.
8995DNCSD/HD video format downconverter, front module and dual wide rear module set
8900GEN-SMGenlock submodule. This submodule mounts to the front module to provide the reference input for the module and frame reference bus. This is required for frame synchronizing operation
SFP-13103G-M1TRXFiber transceiver. Low-power 1310 nm single-mode optical transceiver submodule (one fiber input/one fiber output)
SFP-13103G-M1DTXDual fiber transmitter. Dual low-power 1310 nm single-mode optical transmitter submodule
SFP-13103G-M1DRXDual fiber receiver. Dual low-power 1310 nm single-mode optical receiver submodule
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
8995DNC Downconverter and Frame Sync
Key FeaturesHigh-quality downconverter with •synchronizer for robust signal handling
Image enhancement and pixel-level •motion adaptive conversion for superb picture quality
Full video proc. amp functions, including •RGB and component color controls, video gain, chroma gain, phase control (hue), Y/C White and Y Black clip level controls, and color space conversion (ITU 601, ITU 709)
Embedded audio can be adjusted for •gain, delay, channel pairing, and output processing, then re-embedded into the video output stream
Minimum delay (1 frame conversion) for •low-latency live applications
Maximum adjustable delay up to 9 frames•
Fiber-ready – accepts an optional SFP •fiber device providing optical inputs or outputs
Optional genlock reference input •submodule for reference timing that supports loop-through, Tri-level sync and color black
ApplicationsWhere incoming feeds may be in either •1080 and 720 HD video formats
For live production where low latency •conversion is required
For conversion of signals with embedded •audio
Incoming lines ingest of any signal •format into an HD system, including synchronization conversion and proc. amp adjustment
54 8995DNC Downconverter and Frame Sync
8900UDX-RJ1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
GenlockIn
GenlockLoop Out
Out
Out
In
Auto TrackDelay
ReclockedSDI Out
Out
Out
Fiber In/OutConnector
Fiber RX
Fiber RX
SFP Fiber Optic Transceiver Option
SFP Fiber Optic Dual Receiver
OptionFiber RX
Fiber TXSFP Fiber Optic Dual Transmitter
Option Fiber TX
Fiber TX
4X SD-SDIOut
AudioDelayOut
HD Fiber In 1
HD Fiber In 1
HD Fiber In 2
HD SDI In
Frame Bus 2
Dolby E and Non-PCM Path
Frame Bus 1
Ref In
Loop
SDFiber Out 2
SDFiber Out 2
Reclocked Ouptut
SDFiber Out 1
Only one fiber option can be
installed
De-Embedder
AudioSynchronizer
Embedder
Reclocker
RGB VideoProc. Amp
MotionAdaptiveScaler
ChannelStreamRouting
ComponentVideo
Proc. Amp
GenlockAdjustment
VideoSynchronizer
& Delay Adjust
8900GEN-SMSubmodule
Option
VITC/CCConverter
AdjustableDelay
ChannelGain
Specifications
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames. As this module has no card-edge controls and in order to configure this module an 8900NET (Net Card) Network Interface module is required.
8995UDXSD/HD video format up/down/crossconverter, front module and dual wide rear module set
8900GEN-SMGenlock submodule. This submodule mounts to the front module to provide reference input for the module and frame reference bus. This is required for frame synchronizing operation.
SFP-13103G-M1TRXFiber transceiver. Low-power 1310 nm single-mode optical transceiver submodule (one fiber input/one fiber output)
SFP-13103G-M1DTXDual fiber transmitter. Dual low-power 1310 nm single-mode optical transmitter submodule
SFP-13103G-M1DRXDual fiber receiver. Dual low-power 1310 nm single-mode optical receiver submodule
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
55
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating and Size18 Watts – dual slot
InputsSD/HD-SDI: One electrical or optional fiber optic•Inputequalization:upto125m•Auto-sensing:Yes•Returnloss:>15dB,5to270MHz;
>15 dB typ, to 1.5 GHz
Auto sensing: Yes
Optical: Single-mode (optional)
OutputsSD/HD-SDI: Four electrical and up to two additional optional fiber optic •Returnloss:>15dB,5to270MHz;
>15 dB typical, to 1.5 GHz•Signallevel:800mVp-p±10%•Rise/falltime(20-80%):140pstypforHD,
500 ps typical for SD •Outputjitterinframesyncmode,lowjitterapplied:
< 0.2 UI p-p HD > 100 kHz < 1.0 UI p-p HD > 10 Hz
Optical: Single-mode (optional)
Electrical Length (delay)Fixed delay mode: Nominal: 2 frames (±1 pixel) User-adjustable range: 2 frames minus 5 lines to 3 frames minus 5 lines
Synchronizing mode (asynchronous input): Minimum: 2 frames minus 5 lines Maximum: 3 frames minus 5 lines
Fixed delay mode = in Minimum Delay Mode: Nominal: 1 frame (±1 pixel) User-adjustable range: 1 frame to 2 frames minus 5 lines
Synchronizing mode = in Minimum Delay Mode (synchronous input): Nominal: 1 frame (±1 pixel) User-adjustable range: 1 frame to 2 frames minus 5 lines
Additional adjustable delay: 0 to 6 additional frames
ConversionMethod: Motion adaptive
3:2/2:2 cadence: Automatic detection
Input: 1080i or 480i @ 59.94 Hz, 1080p @ 23.98, 1080sf @ 23.98 or 720p @ 59.94 Hz Output choices: 1080i or 480i @ 59.94 Hz, 1080p @ 23.98, 1080sf @ 23.98 or 720p @ 59.94 Hz
Input: 1080i or 576i @ 50 Hz or 720p @ 50 Hz Output choices: 1080i or 576i @ 50 Hz, 720p @ 50 Hz
Aspect Ratio ConversionConversion modes: 1:1, letterbox, pillarbox, anamorphic, 14:9
Synchronization (Genlock):•Standardframebusgenlockorexternalreferenceif
genlock submodule is installed (NOTE: at least one module per frame must have genlock submodule)
•Adjustment:0to1framein1SDpixelsteps
Timecode and Closed CaptionVITC timecode and Closed Caption SD to HD or HD to SD translation: same frame rate and output line select for VITC and Closed Caption. NOTE: VITC and CC may not work accurately in 23.98 Hz 3:2 pulldown from higher frame rate conversion
Control And MonitoringSNMP: YesWeb page configuration: YesLocal configuration: NoNewton support: YesNetConfig support: YesNetCentral support: Yes
8995UDX Up/Down/Crossconverter and Frame Sync
Key FeaturesUp/down/crossconverter with frame •synchronizer
Image enhancement and pixel-level •motion adaptive conversion for superb picture quality
Synchronizer for robust signal handling•
Full video proc. amp functions, including •RGB and component color controls, video gain, chroma gain, phase control (hue), Y/C White/Y Black clip level controls, and color space conversion (ITU 601, ITU 709)
Minimum delay (1 frame conversion) for •low-latency live applications
Maximum adjustable delay up to 9 frames •
Fiber-ready – accepts an optional SFP •fiber device providing optical input or output
Optional genlock reference input •submodule for reference timing that supports loop-through, Tri-level sync and color black
The 8995UDX is a compact, broadcast-quality, fiber-ready, up/down/crossconverter and synchronizer. Conversion is of the highest quality in all modes, with pixel-adaptive motion processing. In addition, the 8995UDX provides the most robust signal handling with the low hysteresis synchronizer, redundant reference, and perfect-picture mode of the 8985FS.
It is fully featured with color-space conversion and a powerful video proc. amp that includes RGB color correction with gamma and component adjustments with clip level controls on either HD or SD video. The user can also control hue, chroma, and luma similar to a traditional analog proc. amp.
Powerful embedded audio handling includes channel-level and Dolby E stream routing. PCM audio processing eliminates the clicks caused by the video synchronizer dropping or repeating frames and hot upstream video switching. VITC conversion and Closed Captioning are supported for same frame-rate conversions.
One of three types of optional SFP fiber optic submodules can be installed in the fiber optic rear cage connector to provide two fiber inputs (Dual Receiver), two fiber outputs (Dual Transmitter), or one fiber input and one fiber output (Transceiver).
Refer to the rear module pinout and the block diagram on the next page.
ApplicationsWhere incoming feeds may be in either •1080, 720, or SD formats
For live production where low latency •conversion is required
For conversion of signals with embedded •audio
8900UDX-RJ1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
GenlockIn
GenlockLoop Out
Out
Out
In
Auto TrackDelay
ReclockedSDI Out
Out
Out
Fiber In/OutConnector
Fiber RX
Fiber RX
SFP Fiber Optic Transceiver Option
SFP Fiber Optic Dual Receiver
OptionFiber RX
Fiber TXSFP Fiber Optic Dual Transmitter
Option Fiber TX
Fiber TX
4X SD/HD-SDIOut
AudioDelayOut
SD/HD-SDI Fiber In 1
SD/HD-SDI Fiber In 1
SD/HD-SDI Fiber In 2
SD/HDSDI In
Frame Bus 2
Dolby E and Non-PCM Path
Frame Bus 1
Ref In
Loop
SD/HD-SDIFiber Out 2
SD/HD-SDIFiber Out 2
Reclocked Ouptut
SD/HD-SDIFiber Out 1
Only one fiber option can be
installed
De-Embedder
AudioSynchronizer
Embedder
Reclocker
RGB VideoProc. Amp
MotionAdaptiveScaler
ChannelStreamRouting
ComponentVideo
Proc. Amp
GenlockAdjustment
VideoSynchronizer
& Delay Adjust
8900GEN-SMSubmodule
Option
VITC/CCConverter
AdjustableDelay
ChannelGain
56 8995UDX Up/Down/Crossconverter and Frame Sync
Specifications Ordering Information
57
Key FeaturesHigh-quality upconverter with •synchronizer for robust signal handling
Image enhancement and pixel-level •motion adaptive conversion for superb picture quality
Full video proc. amp functions, including •RGB and component color controls, video gain, chroma gain, phase control (hue), Y/C White/Y Black clip controls, and color space conversion (ITU 601, ITU 709)
Minimum delay (1 frame conversion) for •low-latency live applications
Maximum adjustable delay up to 9 frames •
Fiber-ready – accepts an optional SFP •fiber submodule providing optical inputs or outputs
Optional genlock reference input •submodule for reference timing that supports loop-through, Tri-level sync and color black
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating18 Watts – dual slot
InputsSD-SDI: One electrical or optional fiber optic•Inputequalization:upto125m•Auto-sensing:Yes•Returnloss:>15dB,5to270MHz;
>15 dB typical, to 1.5 GHz
Optical: Single-mode (optional)
OutputsHD-SDI: Four electrical and up to two additional optional fiber optic•Returnloss:>15dB,5to270MHz;
>15 dB typ., to 1.5 GHz•Signallevel:800mVp-p±10%•Rise/falltime(20-80%):140pstyp.forHD,
500 ps typ for SD •Outputjitterinframesyncmode,lowjitterapplied:
< 0.2 UI p-p HD > 100 kHz < 1.0 UI p-p HD > 10 Hz
Optical: Single-mode (optional)
Electrical Length (delay)Fixed delay mode: Nominal: 2 frames (±1 pixel) User-adjustable range: 2 frames minus 5 lines to 3 frames minus 5 lines
Synchronizing mode (asynchronous input): Minimum: 2 frames minus 5 lines Maximum: 3 frames minus 5 lines
Fixed delay mode = in Minimum Delay Mode: Nominal: 1 frame (±1 pixel) User-adjustable range: 1 frame to 2 frames minus 5 lines
Synchronizing mode = in Minimum Delay Mode (synchronous input): Nominal: 1 frame (±1 pixel) User-adjustable range: 1 frame to 2 frames minus 5 lines
Additional adjustable delay: 0 to 6 additional frames
ConversionMethod: Motion adaptive
3:2/2:2 cadence: Automatic detection
Input: 480i @ 59.94 Hz Output choices: 1080i @ 59.94 Hz, 1080p @ 23.98, 1080sf @ 23.98, or 720p @ 59.94 Hz
Input: 576i @ 50 Hz Output choices: 1080i @ 50 Hz, 720p @ 50 Hz
Aspect Ratio ConversionConversion modes: 1:1, letterbox, pillarbox, anamorphic, 14:9
Synchronization (Genlock):•Standardframebusgenlockorexternalreferenceif
genlock submodule is installed (NOTE: at least one module per frame must have genlock submodule)
•Adjustment:0to1framein1SDpixelstepsTimecode and Closed CaptionVITC timecode and Closed Caption SD to HD translation: same frame rate and output line select for VITC and Closed Caption. NOTE: VITC and CC may not work accurately in 23.98 Hz 3:2 pulldown from higher frame rate conversion
Control And MonitoringSNMP: YesWeb page configuration: YesLocal configuration: NoNewton support: YesNetConfig support: YesNetCentral support: Yes
For detailed specifications, installation and setup instructions see:www.grassvalley.com/docs/modular
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames. As this module has no card-edge controls and in order to configure this module an 8900NET (Net Card) Network Interface module is required.
8995UPCSD/HD video format upconverter, front module and dual wide rear module set
8900GEN-SMGenlock submodule. This submodule mounts to the front module to provide reference input for the module and frame reference bus. This is required for frame synchronizing operation
SFP-13103G-M1TRXFiber transceiver. Low-power 1310 nm single-mode optical transceiver submodule (one fiber input/one fiber output)
SFP-13103G-M1DTXDual fiber transmitter. Dual low-power 1310 nm single-mode optical transmitter submodule
SFP-13103G-M1DRXDual fiber receiver. Dual low-power 1310 nm single-mode optical receiver submodule
8995UPC Upconverter and Frame Sync
ApplicationsWhere incoming feeds may be in either •480i or 576i SD video formats and require upconversion to HD video
For live production where low latency •conversion is required
For conversion of signals with embedded •audio
The 8995UPC is a compact, broadcast-quality fiber-ready upconverter. Conversion is of the highest quality, with pixel-adaptive motion processing. In addition, the 8995UPC provides the most robust signal handling with the low hysteresis synchronizer, redundant reference, and perfect-picture mode of the 8985FS.
The 8995UPC is fully featured with color-space conversion and a powerful video proc. amp that includes RGB color correction with gamma and component with Y/C clip level adjustments.
Powerful embedded-audio handling includes channel-level and Dolby E stream routing. PCM audio processing eliminates the clicks caused by the video synchronizer dropping or repeating frames. This module silences the effects of hot upstream video switching using a V-fade.
VITC and closed caption data conversion are supported for same-frame-rate conversions, making this an ideal module for playout applications.
One of three types of optional SFP fiber optic submodules can be installed in the fiber optic rear cage connector to provide two fiber inputs (Dual Receiver), two fiber outputs (Dual Transmitter), or one fiber input and one fiber output (Transceiver).
Refer to the rear module pinout and the block diagram on the next page.
58
8900UDX-RJ1 J2
J3 J4
J5 J6
J7 J8
J9
FIBER
GenlockIn
GenlockLoop Out
Out
Out
In
Auto TrackDelay
ReclockedSDI Out
Out
Out
Fiber In/OutConnector
Fiber RX
Fiber RX
SFP Fiber Optic Transceiver Option
SFP Fiber Optic Dual Receiver
OptionFiber RX
Fiber TXSFP Fiber Optic Dual Transmitter
Option Fiber TX
Fiber TX
4X HD-SDIOut
AudioDelayOut
SD Fiber In 1
SD Fiber In 1
SD Fiber In 2
SD SDI In
Frame Bus 2
Dolby E and Non-PCM Path
Frame Bus 1
Ref In
Loop
HDFiber Out 2
HDFiber Out 2
Reclocked Ouptut
HDFiber Out 1
Only one fiber option can be
installed
De-Embedder
AudioSynchronizer
Embedder
Reclocker
RGB VideoProc. Amp
MotionAdaptiveScaler
ChannelStreamRouting
ComponentVideo
Proc. Amp
GenlockAdjustment
VideoSynchronizer
& Delay Adjust
8900GEN-SMSubmodule
Option
VITC/CCConverter
AdjustableDelay
ChannelGain
8995UPC Upconverter and Frame Sync
Specifications Ordering Information
CH 1Output
CH 2Output
CH 3Output
CH 4Output
CH 1Input
CH 2Input
CH 3Input
CH 4Input
Fiber I/OConnector
Fiber OutConnector
8935CF-R
CoaxInputs
Ch2
Ch1
Ch4
Ch3
Equalizer #1
Equalizer #2
Equalizer #3
Equalizer #4
Reclock
Cable Driver #1
TX #1
TX #2
TX #3
TX #4
Cable Driver #2
Cable Driver #3
Cable Driver #4
Bypass
Bypass
Bypass
Bypass
Ch1
Ch2
Ch3
Ch4
FO1
FO2
FO3
FO4
Dual TX
Dual TX
Reclock
Reclock
Reclock
598935CF 4-Channel Electrical to 4-Channel Fiber Optic Conversion Module
The 8935CF is a four-channel electrical to optical broadcast quality fiber optic conversion module with reflected electrical outputs. It can accommodate SD/HD-SDI video inputs from 270 Mb/s to 1.5 Gb/s as well as DVB ASI, unbalanced AES, and Grass Valley audio TDM interfaces. The optical circuitry is housed in dedicated strapmount SFP submodule devices mounted on the module circuit board.To construct a four-channel solution, select two of the SFP transmitter devices for two four-channel operation. The SFPs selected set the power and the wavelength for the unit, which allows for CWDM operation when combined with the 8939FCA/8939FCB optical multiplexer. This replaceable optical technology allows for easy upgrade, reconfiguration, and servicing.
Parameters are controllable via the NetConfig Web browser interface for configuration and parameter adjustment. The popular NetCentral application provides health monitoring for modular products as well as many other Grass Valley products.
Key FeaturesFour-channel SDI/HD-SDI fiber transmitter•
Also supports DVB ASI, AES, and Grass •Valley audio TDM interface
Supports up to two SFP devices for up to •four fiber optic outputs
Reclocking for stable long distance •signals
Reclock bypass for non-SDI signal types•
Accommodates lasers with separated •wavelengths for CWDM optical multiplexing
Single-mode fiber•
Can be used with the 8935FC receiver and •other fiber-ready modules for distances of between 0 and 50 km, depending on the transmitter
Meets SMPTE 292M/297M/259M signal •specifications
ApplicationsTransporting multiple high-definition video •feeds over long distances
For constructing SD/HD-SDI optical tie-•lines
Sending multiple optical signals over long •distances to fiber-ready synchronizing modules for re-timing
To feed the 8939FCA for an extremely •compact multiplexed fiber solution
Supported Frame TypesGeckoFlex
Power Rating7.5 Watts (with two SFP devices) – single slot
Modes of OperationThe 8935CF supports following modes of operations:•Autoreclock270Mb/s/1.5Gb/s/bypassmode•Autoreclock270Mb/s/1.5Gb/smode•Fixedreclock270Mb/smode•Fixedreclock1.5Gb/smode•Fixedbypassmode
EnvironmentalOperating temperature range: 0 to +45°C
Non-operating temperature range: -10 to +70°C
Humidity: 90% non-condensing
Serial Digital InputConnector: BNC equalized for up to 300m of Belden 1694A cable for bit rates up to 270 Mb/s and up to 100 m of Belden 1694A for bit rates from 270 Mb/s to 1.5 Gb/s
Input impedance: 75Ω
Return loss: 15 dB
Reclocking: •SMPTE292M-1998at1.485Gb/s•SMPTE259M-1997andDVB-ASIat270Mb/s
Non-reclocking: 1 to 540 Mb/s, AES 3id-2001 and MADI
Fiber Digital Outputs
Connector: Four LC optical connectors
Optical outputs: One optical per electrical input
Electrical outputs: One 75Ω BNC reflected electrical output per electrical input
Electrical LengthReclocked at 270 Mb: 10 ns
Reclocked at 1.5 Gb: 8 ns
Bypass: 7 ns
Fiber Optic Submodule Devices
Channels 2 Frequencies per CWDM SFP Device
Channel 1 and 2 1470 nm & 1490 nm Transmitters
Channel 3 and 4 1510 nm & 1530 nm Transmitters
Channel 5 and 6 1550 nm & 1570 nm Transmitters
Channel 7 and 8 1590 nm & 1610 nm Transmitters
Channel 9 and 10 1310 nm & 1330 nm Transimitters
Channel 11 and 12 1350 nm & 1370 nm Transmitters
Channel 13 and 14 1390 nm & 1410 nm Transmitters
Channel 15 and 16 1430 nm & 1450 nm Transmitters
These SFP transmitters are Class 1 laser devices
This module can be mounted in a single slot in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames.
8935CFElectrical to fiber optic 1:1 converter baseboard, (front and 8935CF-R rear module set)
Important Order Note: Two SFP devices are required for the full operation of the 8935CF module.
SFP Device – Dual Transmitter•SFP-13103G-M1DTX-K
SFP Device – Dual Transmitter for CWDM•SFP-CWDM3G-1-K–1470nmand1490nm•SFP-CWDM3G-2-K–1510nmand1530nm•SFP-CWDM3G-3-K–1550nmand1570nm•SFP-CWDM3G-4-K–1590nmand1610nm•SFP-CWDM3G-5-K–1310nmand1330nm•SFP-CWDM3G-6-K–1350nmand1370nm•SFP-CWDM3G-7-K–1390nmand1410nm•SFP-CWDM3G-8-K–1430nmand1450nm
For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular
Specifications Ordering Information
FiberInputs
Ch2
Ch1
Ch4
Ch3
Equalizer #1 Reclock
Bypass
Bypass
Bypass
Bypass
Ch1
Ch2
Ch3
Ch4
Ch5
Ch6
Ch7
Ch8
Dual RX SFP
RX #1RX #2
Equalizer #2
RX #3RX #4
Equalizer #3
Equalizer #4
Cable Driver #1
Cable Driver #2
Cable Driver #3
Cable Driver #4
Dual RX SFP
Reclock
Reclock
Reclock
The 8935FC is a four-channel optical to electrical broadcast-quality fiber optic receiver module with two electrical outputs per channel. It can accommodate SD/HD-SDI video 270 Mb/s to 1.5 Gb/s as well as DVB ASI, unbalanced AES, and Grass Valley audio TDM interfaces. The optical circuitry is housed in dedicated strapmount SFP submodule devices mounted on the module circuit board.To construct a four-channel solution, select two of the SFP-DRX-1 SFP dual receiver devices. The SFP-DRX-1 supports both 1310 nm wavelengths and CWDM wavelengths (1270 nm to 1610 nm). This replaceable SFP optical technology allows for easy upgrade, reconfiguration, and servicing.
Parameters are controllable via our NetConfig web browser interface for configuration. The popular NetCentral application provides health monitoring for modular products as well as many other Grass Valley products.
J1 J2
J3 J4
J5 J6
J7 J8
1
32
IN IN
Ch 1Output
CH 1Output
Fiber InConnector
Ch 2Output
CH 2Output
Ch 3Output
CH 3Output
Ch 4Output
CH 4Output
Fiber InConnector
4
8935FC-R
Supported Frame TypesGeckoFlex
Power Rating7.5 Watts (with two SFP devices) – single slot
InputsFour channels of SD/HD-SDI on single-mode fiber
Connector: Four LC optical connectors
Minimum optical input: -20 dBm
Maximum optical input: -1 dBm
OutputsElectrical outputs: Two electrical outputs per optical input
Reclocking: •SMPTE292M-1998at1.485Gb/s•SMPTE259M-1997andDVBASIat270Mb/s
Non-reclocking: 1 to 540 Mb/s, AES 3id-2001 and MADI
Return loss:•15dB5MHzto540MHz•10dB540MHzto1.5GHz
Electrical length: Reclocked at 270 Mb: 10 ns, Reclocked at 1.5 Gb: 8 ns
Bypass: 7 ns
Modes of OperationThe 8935FC supports following modes of operations:•Autoreclock270Mb/s/1.5Gb/s/bypassmode•Autoreclock270Mb/s/1.5Gb/smode•Fixedreclock270Mb/smode•Fixedreclock1.5Gb/smode•Fixedbypassmode
EnvironmentalOperating temperature range: 0 to +45°C
Non-operating temperature range: -10 to +70°C
Humidity: 90% non-condensing
Ordering InformationSpecifications
60
Key FeaturesFour-channel SD/HD-SDI fiber receiver •(each SFP-DRX SPF has dual single-mode PIN receivers)
Also supports DVB ASI, AES, and Grass •Valley audio TDM interface
Supports up to two SFP-DRX-1 devices for •up to four fiber-optic inputs
Two reclocked outputs for stable long •distance reception of each optical feed
Reclock bypass for non-SDI signal types•
Inputs accommodates 1310 nm and •CWDM wavelengths
Single-mode fiber•
Can be used with the 8935CF transmitter •and other fiber-ready modules for distances of between 0 and 50 km, depending on the transmitter
Meets SMPTE 292M/297M/259M signal •specifications
ApplicationsReceiving multiple high-definition video •feeds over long distance fiber connections
For receiving implementing SD/HD-SDI •optical tie-lines
To provide multi-channel receiving •capability alongside the 8939FCA/8939FCB for an extremely compact multiplexed fiber solution
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
8935FC 4-Channel Fiber Optic to 4-Channel Electrical Conversion Module
This module can be mounted in a single slot in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames.
8935FCOptical to electrical converter, front and 8935FC-R rear module set
Important order note: two SFP devices are required for the full operation of the 8935FC module.
SFP DeviceSFP-13103G-M1DRX-K – 1270 nm > 1610 nm dual receiver kit containing fiber optic submodule, mounting bracket, and fiber cable assembly
Specifications Ordering InformationOrdering InformationSpecifications
CH 1Output
CH 2Output
CH 3Output
CH 4Output
CH 1Input
CH 2Input
CH 3Input
CH 4Input
Fiber I/OConnector
Fiber OutConnector
8943CF-R
CoaxInputs
Ch2
Ch1
Ch4
Ch3
Equalizer #1
Equalizer #2
Equalizer #3
Equalizer #4
Reclock
Cable Driver #1
TX #1
TX #2
TX #3
TX #4
Cable Driver #2
Cable Driver #3
Cable Driver #4
Bypass
Bypass
Bypass
Bypass
Ch1
Ch2
Ch3
Ch4
FO1
FO2
FO3
FO4
Dual TX
Dual TX
Reclock
Reclock
Reclock
618943CF 4-Channel Electrical to 4-Channel Fiber Optic Conversion Module
The 8943CF is a four-channel electrical to optical broadcast quality fiber optic conversion module with reflected electrical outputs. It can accommodate SD/HD/3G-SDI video inputs as well as DVB ASI, unbalanced AES, and Grass Valley audio TDM interfaces. The optical circuitry is housed in dedicated strap-mount SFP submodule devices mounted on the module circuit board. To construct a four-channel solution, select two of the SFP transmitter devices for two four-channel operation. The SFPs selected set the power and the wavelength for the unit which allows for CWDM operation when combined with the 8939FCA and 8939FCB optical multiplexers. This replaceable optical technology allows for easy upgrade, reconfiguration and servicing.
Parameters are controllable via the NetConfig Web browser interface for configuration and parameter adjustment. The popular NetCentral application provides health monitoring for modular products as well as many other Grass Valley products.
Key FeaturesFour-channel SDI/HD/3G-SDI fiber •transmitter
Also supports DVB ASI, AES, and Grass •Valley audio TDM interface
Supports up to two SFP devices for up to •four fiber optic outputs
Reclocking for stable long distance •signals
Reclock bypass for non-SDI signal types•
Accommodates lasers with separated •wavelengths for CWDM optical multiplexing
Single-mode fiber•
Can be used with the 8943FC receiver and •other fiber-ready modules for distances of between 0 and 50 km, depending on the transmitter
Meets SMPTE 292M/297M/259M/424M •signal specifications
ApplicationsTransporting multiple high-definition video •feeds over long distances
For constructing SD/HD/3G-SDI optical •tie-lines
Sending multiple optical signals over long •distances to fiber-ready synchronizing modules for re-timing
To feed the 8939FCA for an extremely •compact multiplexed fiber solution
Supported Frame TypesGeckoFlex
Power Rating7.5 Watts (with two SFP devices) – single slot
Modes of OperationThe 8943CF supports following modes of operations:•Autoreclock/bypass•Autoreclock/mute•3G2790M•HD1485M•SD270M•ManualbypassHD/3G•ManualbypassSD
EnvironmentalOperating temperature range: 0 to +45°C
Non-operating temperature range: -10 to +70°C
Humidity: 90% non-condensing
Serial Digital InputConnector: BNC
Equalization (with Belden 1694A cable): 300m up to 270 Mb/s, 100m from 270 Mb/s to 1.5 Gb/s, 80m from 270 Mb/s to 2.97 Gb/s
Input impedance: 75Ω
Return loss: 15 dB
Reclocking: •SMPTE424Mat2.97Gb/s•SMPTE292M-1998at1.485Gb/s
•SMPTE259M-1997andDVB-ASIat270Mb/s
Non-reclocking: 1 to 540 Mb/s, AES 3id-2001 and MADI
Fiber Digital OutputsConnector: Four LC optical connectors
Optical outputs: One optical per electrical input
Electrical outputs: One 75Ω BNC reflected electrical output per electrical input
Electrical LengthReclocked at 270 Mb: 10 ns
Reclocked at 1.5 Gb: 8 ns
Reclocked at 2.97 Gb: 8 ns
Bypass: 7 ns
Fiber Optic Submodule Devices
Channels 2 Frequencies per CWDM SFP Device
Channel 1 and 2 1470 nm & 1490 nm Transmitters
Channel 3 and 4 1510 nm & 1530 nm Transmitters
Channel 5 and 6 1550 nm & 1570 nm Transmitters
Channel 7 and 8 1590 nm & 1610 nm Transmitters
Channel 9 and 10 1310 nm & 1330 nm Transimitters
Channel 11 and 12 1350 nm & 1370 nm Transmitters
Channel 13 and 14 1390 nm & 1410 nm Transmitters
Channel 15 and 16 1430 nm & 1450 nm Transmitters
These SFP transmitters are Class 1 laser devices
This module can be mounted in a single slot in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames.
8943CFElectrical to fiber optic 1:1 converter baseboard, (front and 8943CF-R rear module set)
Important Order Note: Two SFP devices are required for the full operation of the 8943CF module.
SFP Device – Dual Transmitter•SFP-13103G-M1DTX-K
SFP Device – Dual Transmitter for CWDM•SFP-CWDM3G-1-K–1470nmand1490nm•SFP-CWDM3G-2-K–1510nmand1530nm•SFP-CWDM3G-3-K–1550nmand1570nm•SFP-CWDM3G-4-K–1590nmand1610nm•SFP-CWDM3G-5-K–1310nmand1330nm•SFP-CWDM3G-6-K–1350nmand1370nm•SFP-CWDM3G-7-K–1390nmand1410nm•SFP-CWDM3G-8-K–1430nmand1450nm
8935FC 4-Channel Fiber Optic to 4-Channel Electrical Conversion Module
Specifications Ordering Information
FiberInputs
Ch2
Ch1
Ch4
Ch3
Equalizer #1 Reclock
Bypass
Bypass
Bypass
Bypass
Ch1
Ch2
Ch3
Ch4
Ch5
Ch6
Ch7
Ch8
Dual RX SFP
RX #1RX #2
Equalizer #2
RX #3RX #4
Equalizer #3
Equalizer #4
Cable Driver #1
Cable Driver #2
Cable Driver #3
Cable Driver #4
Dual RX SFP
Reclock
Reclock
Reclock
J1 J2
J3 J4
J5 J6
J7 J8
1
32
IN IN
Ch 1Output
CH 1Output
Fiber InConnector
Ch 2Output
CH 2Output
Ch 3Output
CH 3Output
Ch 4Output
CH 4Output
Fiber InConnector
4
8943FC-R
62 8943FC 4-Channel Fiber Optic to 4-Channel Electrical Conversion Module
The 8943FC is a four-channel optical to electrical broadcast-quality fiber optic receiver module with two electrical outputs per channel. It can accommodate SD/HD/3G-SDI video as well as DVB ASI, unbalanced AES, and Grass Valley audio TDM interfaces. The optical circuitry is housed in dedicated strap-mount SFP submodule devices mounted on the module circuit board. To construct a four-channel solution, select two of the dual receiver devices. The dual receiver supports both 1310 nm wavelengths and CWDM wavelengths (1270 nm to 1610 nm). This replaceable SFP optical technology allows for easy upgrade, reconfiguration, and servicing.
Parameters are controllable via our NetConfig web browser interface for configuration. The popular NetCentral application provides health monitoring for modular products as well as many other Grass Valley products.
Supported Frame TypesGeckoFlex
Power Rating7.5 Watts (with two SFP devices) – single slot
InputsFour channels of SD/HD-SDI on single-mode fiber
Connector: Four LC optical connectors
Minimum optical input: -20 dBm
Maximum optical input: -1 dBm
OutputsElectrical outputs: Two electrical outputs per optical input
Reclocking: •SMPTE424Mat2.97Gb/s•SMPTE292M-1998at1.485Gb/s•SMPTE259M-1997andDVBASIat270Mb/s
Non-reclocking: 1 to 540 Mb/s, AES 3id-2001 and MADI
Return loss:•15dB5MHzto540MHz•10dB540MHzto1.5GHz•10dB540MHzto3GHz
Electrical length:
•Reclockedat270Mb:10ns•Reclockedat1.5Gb:8ns•Reclockedat3Gb:8ns
Bypass: 7 ns
Modes of OperationThe 8943FC supports following modes of operations:•Autoreclock/bypass•Autoreclock/mute•3G2790M•HD1485M•SD270M•ManualbypassHD/3G•ManualbypassSD
EnvironmentalOperating temperature range: 0 to +45°C
Non-operating temperature range: -10 to +70°C
Humidity: 90% non-condensing
Key FeaturesFour-channel SD/HD/3G-SDI fiber receiver •(each SFP-DRX SPF has dual single-mode PIN receivers)
Also supports DVB ASI, AES, and Grass •Valley audio TDM interface
Supports up to two SFP-DRX-1 devices for •up to four fiber-optic inputs
Two reclocked outputs for stable long •distance reception of each optical feed
Reclock bypass for non-SDI signal types•
Inputs accommodates 1310 nm and •CWDM wavelengths
Single-mode fiber•
Can be used with the 8943CF transmitter •and other fiber-ready modules for distances of between 0 and 50 km, depending on the transmitter
Meets SMPTE 292M/297M/259M/424M •signal specifications
ApplicationsReceiving multiple high-definition video •feeds over long distance fiber connections
For receiving implementing SD/HD/3G-SDI •optical tie-lines
To provide multi-channel receiving •capability alongside the 8939FCA/8939FCB for an extremely compact multiplexed fiber solution
This module can be mounted in a single slot in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames.
8943FCOptical to electrical converter, front and 8943FC-R rear module set
Important order note: two SFP devices are required for the full operation of the 8943FC module.
SFP DeviceSFP-13103G-M1DRX-K – 1270 nm > 1610 nm dual receiver kit containing fiber optic submodule, mounting bracket, and fiber cable assembly
Specifications Ordering Information
The 8939FCA and 8939FCB are bi-directional optical CWDM multiplexer/demultiplexer modules for the 2 RU GeckoFlex frame. They are used where multiple signals need to be sent over one fiber. When used together, these flexible modules are designed to multiplex up to 16 fiber optic signals onto a single fiber.
Each passive optical module supports SD-SDI, HD-SDI, and 3G-SDI signals from GeckoFlex modules equipped with SFP (small form-factor pluggable) CWDM optical transmitters and will handle up to 3 Gb/s. Standard receivers can be used on each output for the receive function with each module separating the light into its discrete wavelengths. These modules can be used both on the transmit, launch side, or the receive side of the cable.
With the 8939FCA module, the eight main optical ports can be used to accept CWDM wavelength lasers where each signal uses a specific wavelength of light. The expansion port can accept or deliver an additional 1310 nm wavelength signal for 9:1 multiplexing. GeckoFlex fiber-ready modules can be equipped with CWDM fiber transmitters for ultra-compact multiplexed optical capability.
The 8939FCA can also be used with the 8935FCB module to increase the number of optical channels to 16 which can be transmitted over one single-mode fiber cable.
Refer to the block diagrams shown on the following page for using the modules.
Key FeaturesOptical multiplexer/demultiplexer for •combining signals on a single fiber
8939FCA provides up to 8:1 or 1:8 •multiplexing or demultiplexing using CWDM technology
Will accept a ninth 1310 nm signal for 9:1 •multiplexing when connected to the EXP port of the 8939FCA
Using the 8939FCB connected to the EXP •port of the 8939FCA, up to 16 channels can be transmitted on a single fiber
Up to 10 8939FCA modules can be housed •in a GeckoFlex frame providing up to 80 channels of optical multiplexing or demultiplexing per 2 RU frame
The module is a passive optical device for •reliable service
ApplicationsFor transporting multiple SD/HD/3G-SDI •video signal over a limited fiber cable capacity
When reducing infrastructure costs •(cabling, electrical power consumption, space, etc.) is required – multiplexed video over fiber gives us an 8:1 ratio on cabling and support equipment
Fiber is commonly used in any application •where SD/HD/3G-SDI signals are found
Supported Frame TypesGeckoFlex
Power Rating0.0 Watts (passive) – single-slot one piece rear mount
Performance Specifications8939FCA: 8-channel CWDM channels: 1470 nm, 1490 nm, 1510 nm, 1530 nm, 1550 nm, 1570 nm, 1590 nm, 1610 nm
8939FCB: 8-channel CWDM channels: 1310 nm, 1330 nm, 1350 nm, 1370 nm, 1390 nm, 1410 nm, 1430 nm, 1450 nm
Expansion port wavelength coverage: 1260 nm > 1450 nm
8-channel insertion loss: 2.25 dB max.
Expansion port insertion loss: 1.25 dB max.
8-channel link loss: 4 dB max.
Adjacent channel isolation: 35 dB typical
Non-adjacent channel isolation: 50 dB min.
Polarization dependant loss: 0.1 dB max.
Optical return loss: 50 dB min.
Optical ripple: 0.5 dB max.
Thermal stability: 0.005 nm/°C
Channel uniformity 8ch: 1.25 dB typical
EnvironmentalStorage temperature: -10 to +70°C
Operating ambient temperature: -40 to +85°C
Reference InformationThe CWDM SFP transmitter submodule devices used on 8943CF and the SFP receiver used on 8943FC modules (or other fiber-ready GeckoFlex modules) used in conjunction with the 8939FCA and 8939FCB support the following frequencies supporting data rates up to 3 Gb/s:
Model Transmitter Frequencies Supported
SFP-CWDM3G-1-K 1470 nm 1490 nm
SFP-CWDM3G-2-K 1510 nm 1530 nm
SFP-CWDM3G-3-K 1550 nm 1570 nm
SFP-CWDM3G-4-K 1590 nm 1610 nm
SFP-CWDM3G-5-K 1310 nm 1330 nm
SFP-CWDM3G-6-K 1350 nm 1370 nm
SFP-CWDM3G-7-K 1390 nm 1410 nm
SFP-CWDM3G-8-K 1430 nm 1450 nm
Receiver Frequency Supported
SFP-13103G-M1DRX-K 1270 nm > 1610 nm Dual Receiver
NOTE: The CWDM submodules listed above may also be used with the 8935CF and 8935FC but the 8935 modules only handle bit rates up to 1.5 Gb/s..
These modules can be mounted in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames. These modules mount from the rear, each taking up one slot. These modules have no controls or settings.
8939FCARear-mount fiber optic mux and demux 8:1 or 1:8 module with Ch1 – Ch8 with expansion port
8939FCBRear-mount fiber optic mux and demux 8:1 or 1:8 module used with the 8939FCA to provide eight additonal fiber optic channels Ch9 – Ch16
WARNINGThe COM and EXP outputs of the 8939FCA and 8939FCB may fall into the Class IIIa Laser Device catagory, depending on number of SFP input choices.
CH101330 nm
COM
8939FCB
CH91310 nm
CH111350 nm
CH121370 nm
CH141410 nm
CH131390 nm
CH151430 nm
CH161450 nm
Class |||aLaser Product
N/A
CH21490 nm
COM
8939FCA
CH11470 nm
CH31510 nm
CH41530 nm
CH61570 nm
CH51550 nm
CH71590 nm
CH81610 nm
Class |||aLaser Product
EXP
638939FCA/8939FCB Fiber Optic Mux/Demux Modules
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Block Diagrams for Mux/Demux ApplicationsThe 8939FCA module can be used alone for various applications or together with the 8939FCB module, depending on the application. Refer to the block diagrams below for applications for both modules. In all of the applications using the 8939FCA and 8939FCB modules, the 8935CF/8935FC (1.5 Gb/s) or 8943CF/8943FC (3 Gb/s) or other fiber-ready GeckoFlex modules feeding video to the 8939 modules must be fitted with the correct frequency SFP fiber optic submodule and cabled to the corresponding channel for that frequency.
8939FCA Bi-Directional Application
The 8939CFA and 8939FCB can also be used in a bi-directional application where any single channel on the module can transport a video signal on its specific wavelength independent of the direction and use of the other channels as shown in the block diagram at right. When the 8939FCB is connected to the 8939FCA via the EXP port, the module can mux and demux 16 channels in two directions in any combination.
8939FCA/8939FCB 16-Channel Mux/Demux Application
When the 8939CFA is used with the 8939FCB as shown in the block diagram at left, an additional eight fiber optic channels from the 8939FCB are made available. This allows a total of 16 channels to be multiplexed and demultiplexed on a single fiber cable.
8939FCA 9:1 Multiplexer to 1:9 Demultiplexer
The 8939FCA can multiplex up to nine fiber video channels from two 8943CF (Coax to Fiber) modules and another 1310 nm Grass Valley fiber-ready module. Another 8939FCA can demultiplex the signals and feed them to two 8943FC (Fiber to Coax) modules and a 1310 nm fiber-ready Grass Valley module over a single-mode fiber cable at a location up to 50 kilometers away.
When used as a nine-channel Mux > Demux device, the module can handle nine channels of video as shown in the block diagram example below. Note that this includes the use of the EXP ports in both modules.
Single-modeFiber
Distanceof 50 km
Ch1
Ch2
Ch3
Ch4
Ch1
Ch2
Ch3
Ch4
SD/HD-SDCoax In
SD/HD-SDCoax Out
SD/HD/3GSDI Coax In
Ch6 TX
Ch5 TX
Ch2 TX
Ch1 TX
Ch7 TX
Ch8 TX
Ch9 TXEXP
1610 nm
1310 nm
1590 nm
1570 nm
1550 nm
MUX
8939FCA8943FC
CWDM3G-3
CWDM3G-4
CWDM3G-1
CWDM3G-2
8943CF
8943CFCOM
8900Fiber-Ready
Module
Ch1
Ch2
Ch3
Ch4
Ch1
Ch2
Ch3
Ch4
SD/HD/3GSDI Coax Out
1260 nm TO 1610 nm DRX
1260 nm TO 1610 nm DRX
1260 nm TO 1610 nm DRX
1260 nm TO 1610 nm DRX
8943FC
8943FC
8900Fiber-Ready
Module
1490 nm
1470 nm
Ch3 TXCh4 TX 1530 nm
1510 nm
CH11470 nm
CH21490 nm
CH31510 nm
CH41530 nm
CH51550 nm
CH61570 nm
CH71590 nm
CH81610 nm
EXP
DEMUX
8939FCA
COM
CH11470 nm
CH21490 nm
CH31510 nm
CH41530 nm
CH51550 nm
CH61570 nm
CH71590 nm
CH81610 nm
Ch9 TX1310 nm
Ch6 TX
Ch5 TX
Ch2 TX
Ch1 TX
Ch7 TX
Ch8 TX 1610 nm
1590 nm
1570 nm
1550 nm
1490 nm
1470 nm
Ch3 TXCh4 TX 1530 nm
1510 nm
COM
EXP
8939FCA
Single-mode Fiber (up to 50 km)
8939FCA
Ch1 TX
Ch2 TX
Ch3 TX
Ch4 TX
Ch5 TX
Ch6 TX
Ch7 TX
Ch8 TX
COMCh1 RX
Ch2 RX
Ch3 RX
Ch4 RX
Ch5 RX
Ch6 RX
Ch7 RX
Ch8 RX
COM
8939FCB 8939FCB
Ch9 TX
Ch10 TX
Ch11 TX
Ch12 TX
Ch13 TX
Ch14 TX
Ch15 TX
Ch16 TX
COM
Ch9 RX
Ch10 RX
Ch11 RX
Ch12 RX
Ch13 RX
Ch14 RX
Ch15 RX
Ch16 RX
MUX
DEM
UX
MUX
DEM
UX
EXP
EXP (N/A)(N/A) EXP
8939FCA 8939FCA
Ch7 RXCh8 RX
Ch3 TX
Single-mode
Ch4 TX
Ch1 TX
Ch5 RX Ch6 RX
Ch1 RX Ch2 RX Ch2 TX
Ch3 RXCh4 RX
Ch5 TX Ch6 TX
Ch7 TX Ch8 TX
EXP8943CF CH 1-4
8943CF CH 5-8
8943FC CH1-4
8943FC CH 5-8
EXP
COMM COMM
8939FCA
64 8939FCA/8939FCB Fiber Optic Mux/Demux Modules
Ordering Information
Key FeaturesAdd fiber to your fiber-ready modules as •needed
Flexible choices in regards to transmit, •receive, and transceiver devices
SMPTE 292M/297M/259M/424M •compatible
Based on mature industry-standard SFP •technology
Handles pathological test patterns•
Internally calibrated digital diagnostic •monitoring interface
Robust die-cast metal housing•
Supports single-mode fiber•
LC connector•
One of the two transmitters in a dual •device can be turned off allowing it to be kept as an installed spare channel
ApplicationsSFPs can be installed on any fiber-ready •GeckoFlex module
They provide optical inputs/optical outputs•
For long-distance connections which •exceed the limits of coaxial cable
For applications where the size or weight •of cable is an issue, especially where multiplexed fiber is used
To provide electrical isolation•
SFP Fiber Optic Overview
The SFP fiber optic submodule is a dual-channel optical connection device that can be added to any fiber-ready module to provide optical input, optical output, or both. SFPs support single-mode fiber connections using compact, stable LC connectors.
Using these SFPs, ordinary modules can be made into fiber-capable modules eliminating the wasted space and additional cost of dedicated fiber conversion modules. The SFP approach also means that maintenance replacement and upgrade are simple tasks.
High-definition signals often require signal transport above the limit of conventional cables. Optical connections go further while providing electrical isolation. They can also be multiplexed for extremely compact solutions even in adverse environments. These SFPs support single-mode fiber which carries SD/HD/3G SDI signals substantially further than multi-mode.
Data rate capability depends on the front module used. Refer to the specific front module specification for the type of SFP that can be installed.
Refer to the Ordering Information below and the following pages for all SFP specifications and a SFP to front module compatibility chart. SFP devices supporting data rates up to 2.97 Gb/s are strap-mount kits installed on the GeckoFlex front module circuit boards that support data rates up to 2.97 Gb/s.
The following types of SFP modules are available for data rates up to 2.97Gb/s:
The SFP-13103G-M1DTX is a dual transmitter suitable for straightforward optical connections.
The SFP-13103G-M1DRX is a dual wideband optical receiver that will support all the SFP transmitters both the CWDM and 1310 types.
The SFP-CWDM3G-1-8 units are used where optical multiplexing is required. Optical multiplexing also needs two 8939FCA/8939FCB modules, one to multiplex the signals and the other to de-multiplex them again. As the multiplexing requires eight discrete wavelengths of light, the SFP-CWDM3G parts are available in eight versions with each covering two of the 16 wavelengths.
The SFP-13103G-M1TRX uses its two optical channels to provide a transceiver capability (one send/one receive). Modules fitted with this part make great optical repeaters with local electrical outputs if required.
Fiber Optic SFP Devices
SD/HD/3G 1310NM Transceiver SFPsSFP-13103G-M1TRX-K SFP Kit 1310 nm M1 Transceiver
SFP-13103G-M1TRX SFP 1310 nm M1 Transceiver
SFP-13103G-M2TRX SFP 1310 nm M2 Transceiver
SD/HD/3G 1310 nm Dual Transmitter SFPsSFP-13103G-M1DTX-K SFP Kit 1310 nm M1 Transmitter
SFP-13103G-M1DTX SFP 1310 nm M1 Transmitter
SFP-13103G-M2DTX SFP 1310 nm M2 Transmitterr
SD/HD/3G 1310 nm Dual Receiver SFPsSFP-13103G-M1DRX-K SFP Kit 1310 nm M1 Receiver
SFP-13103G-M1DRX SFP 1310 nm M1 Receiver
SFP-13103G-M2DRX SFP 1310 nm M2 Receiver
SD/HD/3G CWDM Dual Transmitter SFPsSFP-CWDM3G-1-K SFP Kit 1470-1490 nm Dual Transmitter
SFP-CWDM3G-1 SFP 1470-1490 nm Dual Transmitter
SFP-CWDM3G-2-K SFP Kit 1510-1530 nm Dual Transmitter
SFP-CWDM3G-2 SFP 1510-1530 nm Dual Transmitteri
SFP-CWDM3G-3-K SFP Kit 1550-1570 nm Dual Transmitter
SFP-CWDM3G-3 SFP 1550-1570 nm Dual Transmitter
SFP-CWDM3G-4-K SFP Kit 1590-1610 nm Dual Transmitter
SFP-CWDM3G-4 SFP 1590-1610 nm Dual Transmitter
SFP-CWDM3G-5-K SFP Kit 1310-1330 nm Dual Transmitter
SFP-CWDM3G-5 SFP 1310-1330 nm Dual Transmitter
SFP-CWDM3G-6-K SFP Kit 1350-1370 nm Dual Transmitter
SFP-CWDM3G-6 SFP 1350-1370 nm Dual Transmitter
SFP-CWDM3G-7-K SFP Kit 1390-1410 nm Dual Transmitter
SFP-CWDM3G-7 SFP 1390-1410 nm Dual Transmitter
SFP-CWDM3G-8-K SFP Kit 1430-1450 nm Dual Transmitter
SFP-CWDM3G-8 SFP 1430-1450 nm Dual Transmitter
How to Order: Refer to the SFP Fiber Optic Submodule Compatibility table on the following pages for information on how to order a specific submodule for your front GeckoFlex module.
65
SFP Devices with Data Rates from 143 Mb/s to 2.97 Gb/s
Transmitter SFP Specification Table
Model NumbersSFP-13103G-M1DTX-K,SFP-13103G-M1DTX,SFP-13103G-M2DTX
SFP-CWDM3G-1-K,SFP-CWDM3G-1
SFP-CWDM3G-2-K,SFP-CWDM3G-2
SFP-CWDM3G-3-K,SFP-CWDM3G-3
SFP-CWDM3G-4-K,SFP-CWDM3G-4
SFP-13103G-M1TRX-K,SFP-13103G-M1TRX,SFP-13103G-M2TRX
Wavelength 1 1310 nm 1470 nm 1510 nm 1550 nm 1590 nm 1310 nmWavelength 2 1310 nm 1490 nm 1530 nm 1570 nm 1610 nm N/A
Model NumbersSFP-CWDM3G-5-K,
SFP-CWDM3G-5SFP-CWDM3G-6-K,
SFP-CWDM3G-6SFP-CWDM3G-7-KSFP-CWDM3G-7
SFP-CWDM3G-8-K,SFP-CWDM3G-8
Wavelength 1 1310 nm 1350 nm 1390 nm 1430 nmWavelength 2 1330 nm 1370 nm 1410 nm 1450 nmTransmit Channels 2 2 2 2 1 1
Power Output @ 2.97 Gb/s, 360 Mb/s, and 270 Mb/s
TX power: -7 to +2 dBm
(± 3 dB)TX Power: -2 to +5 dBm (+3 dB)
TX Power: -7 to +2 dBm
RX Power: -22 to -1 dB
(± 3 dB)ParametersMaximum Distance with SFP-13103G-M1DRX-KSFP-13103G-M1DRXSFP-13103G-M2DRX @ 2.97 Gb/s
10 km 50 km 30 km
Maximum Distance with SFP-13103G-M1DRX-KSFP-13103G-M1DRXSFP-13103G-M2DRX @ 2.97 Gb/s
20 km 60 km 20 km
Minimum Distance with SFP-13103G-M1DRX-KSFP-13103G-M1DRXSFP-13103G-M2DRX @ 2.97 Gb/s
0 km (note 1) 0 km (note 2) 0 km (note 1)
Minimum Distance with SFP-13103G-M1DRX-KSFP-13103G-M1DRXSFP-13103G-M2DRX @ 2.97 Gb/s
N/A 50 km (note 3) N/A
Optical Input Wavelength N/A N/A N/A N/A N/A 1260 nm through 1620 nm
NOTE 1: The 1310 nm Dual Transmitter (SFP-13103G-M1DTX) and Transceiver (SFP-13103G-M1TRX, SFP-13103G-M2TRX) require no attenuation between fiber transmitter and receiver connections at any cable lengths.NOTE 2: All CWDM devices used in point-to-point configuration with a cable run from 0-20 km, must be attenuated by 6 dB between the fiber transmitter and receiver connections.NOTE 3: CWDM devices used with 8939FCA or 8939FCA/8939FCB modules for a mux/demux configuration with a cable run from 0-12 km (7.5 miles), must be attenuated by 4 dB between 8939FCA or the 8939FCA/8939FCB COM ports.
Receiver SFP Specifications Table
Model NumbersSFP-13103G-M1DRX-KSFP-13103G-M1DRX,SFP-13103G-M2DRX
SFP-13103G-M1TRX-KSFP-13103G-M1TRXSFP-13103G-M2TRX
Low Wavelength 1270 nm 1270 nmHigh Wavelength 1610 nm 1610 nmReceiver Channels 2 1Parameters 75% Color BarsMaximum Receive Signal Levels @ 2.97 Gb/s, 360 Mb/s, and 270 Mb/s -3 dBm (0.501 mW)Minimum Receive Signal Levels @ 2.97 Gb/s, 360 Mb/s, and 270 Mb/s -23 dBm (0.500794 mW)
General SpecificationsSupported module types: GeckoFlex fiber-ready front modules with strap-mount SFP connectors and support up to 2.97 Gb/s data rates
Optical connectors: LC
Fiber support: Single-mode fiber
Data rate: 143 Mb/s to 2.97 Gb/s
For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular
Specifications
66 Fiber Optic SFP Devices
Specifications Ordering Information
Legend:S = Strap-mount Front Module
C = Cage-mount Front Module
X = Recommended to order
* = Module requries kit
How to Use this Table:Locate your front module on the right. Note the type of front module, either C or S. Order the recommended SFP for your front module type. Refer to the Notes section at the bottom of this table for more information. (C
) 892
5DM
B-B
(ver
sion
2.1.
3 or
late
r)
(C) 8
925D
MB-
U (v
ersio
n 2.
1.3
or la
ter)
(C) 8
925E
MB-
B (v
ersio
n 2.
1.3
or la
ter)
(C) 8
925E
MB-
U (v
ersio
n 2.
1.3
or la
ter)
(S) 8
935C
F (v
ersio
n 1.
0.0
or la
ter)
(S) 8
935F
C (v
ersio
n 1.
0.0
or la
ter)
(S) 8
943R
DA-D
FR (v
ersio
n 1.
1.2
or la
ter)
(C) 8
947R
DA-F
R (v
ersio
n 1.
3.1
or la
ter)
(C) 8
949M
DA-C
FR (v
ersio
n 2.
4.1
or la
ter)
(S) 8
949M
DA-C
XF (v
ersio
n 2.
0.1
or la
ter)
(C) 8
949M
DA-S
FR (v
ersio
n 2.
4.1
or la
ter)
(S) 8
949M
DA-S
XF (v
ersio
n 2.
0.1
or la
ter)
(C) 8
985F
S (v
ersio
n 1.
3.2
or la
ter)
(C) 8
985F
SP (v
ersio
n 1.
3.2
or la
ter)
(C) 8
995D
NC (v
ersio
n 1.
2.4
or la
ter)
(C) 8
995U
PC (v
ersio
n 1.
2.4
or la
ter)
(C) 8
995U
DX (v
ersio
n 1.
2.4
or la
ter)
(C) 2
040R
DA-F
R (v
ersio
n 2.
1.1
or la
ter)
(C) 2
040R
DA-1
6FR
(v2.
1.1
or la
ter)
TransceviersSFP-13103G-M1TRX-K X X X
SFP-13103G-M1TRX X X X X X* X* X* X X X X X X X
SFP-13103G-M2TRX X X X X X* X X X* X X* X X X X X X X
Dual ReceiversSFP-13103G-M1DRX-K X X X
SFP-13103G-M1DRX X X X X X* X* X X* X X X X X X X X
SFP-13103G-M2DRX X X X X X* X X X* X X X X X X X X X
Dual TransmittersSFP-13103G-M1DTX-K X X X X
SFP-13103G-M1DTX X X X X X* X* X X* X* X X X X X X X
SFP-13103G-M2DTX X X X X X* X X X* X X* X X X X X X X
CWDM Dual TransmittersSFP-CWDM3G-1-K (1470-1490 nm) X
SFP-CWDM3G-1 (1470-1490 nm) X*
SFP-CWDM3G-2-K (1510-1530 nm) X
SFP-CWDM3G-2 (1510-1530 nm) X*
SFP-CWDM3G-3-K (1550-1570 nm) X
SFP-CWDM3G-3 (1550-1570 nm) X*
SFP-CWDM3G-4-K (1590-1610 nm) X
SFP-CWDM3G-4 (1590-1610 nm) X*
NOTE 1: The strap-mount type front GeckoFlex circuit boards require a kit for initial installation. Part numbers with a -K indicate a kit. Each SFP kit includes an SFP submodule, a mounting bracket, and a 2-channel fiber cable assembly. When a kit has been installed, spare or replacement submodules can be ordered without the kit by ordering only the submodule part number (without the -K).
NOTE 2: Modules with current software listed above can use the latest SFP models listed above and the older versions as well. Modules must be updated to the current software version listed above to use the latest SFP models listed here.
NOTE 2: Software updates are available for each module on the Grass Valley FTP site free of charge. Refer to the Release Notes for each module posted on the Grass Valley web site at this URL: www.grassvalley.com/docs/modular. The Release Notes will describe how to acquire and load the latest software.
67Fiber Optic SFP Devices
Ordering Information
Specifications
Receiver Media Converter Table
Data Rates from 143Mb/s to 2.97Gb/s
Model Number MVMC-3G-RXParameter @2.97 Gb/s (75% Color Bars)Receiver Channels 1Low Wavelength 1260 nmHigh Wavelength 1620 nmMax. Receive Signal Level
0 dBm
Min. Receive Signal Level
-20 dBm
General SpecificationsOptical connectors: LC
Fiber support: Single-mode fiber
Data rate: 143 Mb/s to 2.97 Gb/s
Transmitter Media Converter Table
Data Rates from 143 Mb/s to 2.97 Gb/s
Model Numbers MVMC-3G-TX MVMC-3G-TX1550Parameters @2.97Gb/s (75% Color Bars)Transmit Channels 1 1Optical Interface LC LCElectrical Interface 75Ω BNC 75Ω BNCWavelength 1 1310 nm 1550 nm
Power Output at 2.97 Gb/sMin./Max.
-6 dBm / -3 dBm (Typical: -4.5 dBm)
Min./Max.0 dBm / +3 dBm
(Typical: +1.5 dBm)Link Distance with MVMC-3G RX Receiver @ 2.97 Gb/s
10 km 50 km
Power Provided by MVMC-PS-1 wall power supply (100V to 200V)
NOTE 1: Assumes 0 dB additional external attenuator.NOTE 2: The maximum distance will be reduced by 15 km if 5 dB additional external attenuator is present to mitigate risk of
0 km receiver overload. NOTE 3: A 5 dB additional external attenuator will be required to mitigate risk of 0 km receiver overload.
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Ordering Information
Media converters are small single-channel optical converters that attach to the BNC input or output (depending on the model) and convert SD/HD/3G, AES, MADI electrical signals to/from fiber optic signals. Media converters support single-mode fiber connections using robust LC connectors. Using these media converters, ordinary modules, routers, servers, and many other broadcast products can be made fiber-capable.
High-definition signals often require signal transport above the limit of conventional cables. Optical connections go further while providing electrical isolation. These media converters support single-mode fiber which carries SD/HD/3G, AES, MADI signals substantially further than multi-mode.
Key FeaturesAdd fiber to any • SD/HD/3G, AES, MADI module or other broadcast equipment as needed
Flexible choices for transmit and receive •devices
SMPTE 292M/297M/259M/424M •compatible
Based on mature industry-standard fiber •optic technology
Handles pathological test patterns•
Robust housings•
Supports single-mode fiber•
BNC to/from optical LC connector•
AttributesMedia converters can be attached to any •SD/HD/3G, AES, MADI module or source/destination
For long-distance connections which •exceed the limits of coaxial cable
For applications where the size or weight •of cable is an issue
To provide electrical isolation•
Supports SMPTE 310M/259M/292M/297M/ •424M and DVB/ASI
Line equalized (typical 1694A: •100m @ 2.97 Gb/s, 200m @ 1.485 Gb/s, and 400m @ 270 Mb/s)
The media converters are offered as individual transmit and receiver devices. These fiber optic media converter devices require one power supply per device. The media converter frames support up to 18 transmit or receive media converters and provide power for all 18 devices. All of the media converter receivers operate over a range of 1270 nm > 1610 nm.
Frames for Media Converters
VMCR3G-18-R18-channel media converter rack mount frame (19" 1 RU) w/power supply
Media Converters
MVMC-3G-RX LC to BNC simplex SD/HD/3G, AES, MADI 1270 > 1610 nm optical receiver
MVMC-3G-TXLC to BNC simplex SD/HD/3G, AES, MADI 1310 nm optical transmitter
MVMC-3G-TX1550LC to BNC simplex SD/HD/3G, AES. MADI 1550 nm optical transmitter
Power Supplies
MVMC-PS-1Media converter universal power supply
68 Fiber Media Converter Devices
Specifications Ordering InformationOrdering InformationSpecifications
698949SVM-UMD/-LOC SD/HD-SDI Single Viewing Module
Key FeaturesMonitor SD or HD-SDI feeds on flat-panel •monitors
Drive video or low-cost computer monitor •panels
Support for digital DVI or analog VGA-style •monitors
UMD and tally control from an external •controller via Ethernet (8949SVM-UMD only)
Analog audio monitoring outputs•
Audio delay compensation for both module •and monitor processing
Auto-sensing of monitor resolution and •scan rate via EDID
Temporal conversion to display video or •non-video (PC) monitors
Built-in display compensation for color •and black stretch
Patterns, including PLUGE, for monitor setup•
Frame lock modes to ensure no skipped or •repeated frames
ApplicationsMonitoring video in the production •environment on compact, high-quality flat-panel displays
Using low-cost computer displays for •viewing HD signals
Creating a complete monitor station with •high-resolution viewing and stereo audio
The 8949SVM module displays SD-SDI and HD-SDI signals on flat-panel monitors, including video or computer TFT displays. The output is via a DVI-I type connection and can be used to feed digital DVI monitors or analog VGA-style units. The 8949SVM supports a wide range of monitor resolutions and refresh rates. The input is auto-sensing for HD and SD. The output is auto-sensing for resolution and scan rate. These features can provide for zero-configuration installation.
The 8949SVM-UMD includes on-screen UMD text and tally indicators. The UMD and tally facilities can be driven from a central controller via the module’s own Ethernet connection.
The module includes balanced analog audio monitoring outputs. Display of 50 Hz video formats on 60 Hz monitors is supported. The picture can be tuned using the built-in black stretch, color space conversion, and RGB proc amp controls. These adjustments are usually
missing from the monitor itself. This module supports 16:9, 16:10, 4:3, and 5:4 monitor screen aspects when fed with 16:9, 4:3, or 16:9 anamorphic (SD) pictures. The input is auto-sensing for non-anamorphic HD and SD units. SD inputs with anamorphic aspect ratios can be displayed but the aspect ratio must be set manually.
Supported Frame TypesThe module is compatible with GeckoFlex frames with fans (8900FF and 8900FFN)
Power Rating and Size8.5 Watts – single slot
InputsSD/HD-SDI: Auto-sensingNote: selection of anamorphic SD initiated by the user
Equalization: •Upto125m(HD-SDIonBelden1694Acable)•Upto330m(SD-SDIonBelden1694Acable)
Ethernet (8949SVM-UMD only): For UMD and tally control
OutputsDVI-I: •Withdigitalandanalog(VGA-type)signals•Maximumcablelength15m(dependentoncable
and display resolution)
SD/HD-SDI: 2 x equalized copy of input feed (not re-clocked)
Analog: 2 x channels balanced (maximum level +24 dBu)
Supported Output Resolutions5:4: 1280 x 10244:3: 1024 x 768, 1400 x 1050, 1600 x 120016:10: 1280 x 800, 1440 x 900, 1680 x 1050, 1920 x 1200
16:9: 1366 x 768, 1920 X 1080Other: 1280 x 768
Frame Rate ConversionThe table below shows approximate available output frame rates:
Output
Input 50 Hz 59.94 Hz 60 Hz
23.98 Hz Yes
50 Hz Yes Yes
59.94 Hz Yes
Output modes only available where supported by the monitor. Shaded modes in the table above apply temporal conversion. Computer scan rates are often close but not exactly equal to 60 Hz. The 8949SVM adjusts the blanking and vertical blanking to provide 60 Hz scan rate.
On-Screen DisplayTallies: Two (red and green)
UMD Text: 16 characters (standard ASCII characters plus an extended character set)
Important Note: Configuration of the module parameters is done with local on-board paddle switch controls. The configuration for the UMD and tally connections is not through the frame’s 8900NET (Net Card). For the 8949SVM-UMD, the UMD and tally are connected through the module’s own Ethernet connection and managed by an external system supporting TSL protocol.
This module can be mounted in a GeckoFlex frame with fans but not in other 8900 series frames, including Gecko-A or Gecko-V frames.
8949SVM-UMDSD/HD single viewing module with UMD and tally management, front and rear module set
8949SVM-LOCSD/HD single viewing module, front and rear module set
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
8900AVM-RJ1 J2
J3 J4
J5
J7
J9
SD/HD-SDIIn
SD/HD-SDI OutEqualized input
SD/HD-SDI OutEqualized input
Analog AudioOut
Analog AudioOut
Not Used
DVI-IConnector
Ethernet
Ethernet(-UMD only)
SD/HD-SDIInput
DVI-D Output(on DVI-I connector)
EqualizedSD/HD-SDIOutputs
DVI-A Output(on DVI-I connector)Analog AudioOutputs
EthernetInterface
De-embedder
Black Stretch
On-screen Display Keyer
ScalerColor Space
Conversion
Video Proc. Amp
(Chroma/Luma)
UMDText
Tally
TemporalConversion
Componentto RGB
Conversion
RGB DisplayCorrectionProc Amp
VideoD-A
Converter
GroupSelector
Audio Delay(Fixed and Adjustable)
PairSelector
Audio A-DConverter
(left)Audio A-DConverter
(right)
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
SDIOutput
SDIOutput
NotUsed
Color Black or Composite
Sync
V/R
U/B
Loopthru
Y/G
RefLoop
8900V-R
Remote
Timing Generator
AnalogFilter
Micro-processor
YUVConverter
Mux& 601
Encoder
LEDs
SDIDelayADC Gain
Y/GU/BV/R
Ext Ref
Controls
Specifications Ordering Information
70
The 8950ADC converts a component analog video signal from analog VTRs and switchers to serial digital, which can then be routed through a digital router or switcher, or stored on a digital video disk recorder. It offers 2.5 horizontal lines of user-controllable delay to adjust the output timing, and inserts EDH code to help track errors downstream.
All possible adjustments to this card can be performed directly on the module. When the 8900NET card is installed in the frame, you gain immediate access to remote control and monitoring.
Key Features10-bit A-to-D converter•
Special 0:4:4 full-bandwidth chroma output•
4X over-sampling for outstanding •resolution
Individual component gain adjustment•
EDH insertion•
Two lines output phasing•
Supports all popular CAV formats•
Selective vertical blanking•
Passive loop-through reference input, •color black, or composite sync
Housed in the same frame with other •8900-V audio and video modules
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating7.2 Watts – single slot
InputType: Component analog video
Connector: 75Ω BNC terminating
Format: RGB, EBU N10, Beta (US), Beta (Japan), MII (US), MII (Japan)
Return loss: >40 dB to 5.5 MHz
Reference InputConnector: High Z differential loop-through BNC
Return loss: >40 dB to 5.5 MHz
OutputSignal type: SMPTE 259M, 10-bit 4:2:2, 270 Mb/s
Number of outputs: Two
Connector: 75Ω BNC
Return loss: >18 dB to 270 MHz EDH embedded
PerformanceQuantization: 10-bit
Internal DSP: 4X over-sampling
Frequency response: ±0.1 dB
Group delay error: <5 ns
Signal-to-noise ratio: >60 dB
Output phasing range: Up to 2.5 video lines
Phasing increment: 37 ns step
Electrical length: 2.5 µs
Operating temperature: 0° to 45°C
Relative humidity: 0% to 90% non-condensing
Indicators and ControlsIndicators: •Inputvideopresent•Referencepresent(2:525,625)•Fault•Power
Front edge controls: •Standardselection•Videogain•Componentgainadjustments•Componentblacklevel•Inputformat•Blanking•Outputdelay
Remote: All indicators and controls via frame Ethernet
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear.
8950ADCComponent video A-to-D converter
8950ADC Component A-to-D Converter
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Y/G
8900V-R
CompositeSync
CompositeSync
SDI Input
V/R
U/B
Y/G
V/R
U/B
Loopthru
Micro-processor
LEDs
Y/G
Y/GU/BU/B
V/RV/R
PLL
DAC
AdjDelay
SyncGenerator
Y,U,VSeparator
Color SpaceConversion
Optional
Gain
Offset
Ethernet
LocalControls
SDILoopthrough
CompositeSync
71
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear.
8950DACComponent video D-to-A converter
Use the 8950DAC to display a serial component digital signal on an analog RGB monitor, to record a digital video signal to an analog component VTR, or to send digital video to a component analog switcher. The 8950DAC is compact and fits in the 8900-V frame.
Key Features10-bit D-to-A converter•
4X over-sampling for outstanding •resolution
Independent component gain adjustment•
EDH detection to track signal errors•
2.5 lines output phasing•
Supports all popular CAV formats•
Selective vertical blanking•
SDI passive loop-through input•
Remote control via Ethernet frame I/F•
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating7.5 Watts – single slot
InputSignal type: SMPTE 259M serial 10-bit 4:2:2 component video
Connector: High Z differential loop-through BNC
Return loss: >18 dB up to 270 MHz
OutputConnector: 75Ω BNC
Number of video outputs: Two sets (RGB or YUV)
Number of analog sync outputs: Two
Formats: RGB, EBU N10 (SMPTE MII Japan), Beta US, Beta Japan, MII US
Sync output: Analog composite sync
Return loss: >40 dB up to 5.5 MHz
PerformanceQuantization: 10-bit
Sampling: 4X (54 MHz)
Frequency response: ±0.1 dB
Phase increments: 37 ns
Signal-to-noise ratio: ≥70 dB
Group delay error: <5 ns
Vertical blanking: •525:narrow9Lorwide19L•625:narrow9Lorwide25L
Output phasing: 2.5 horizontal lines
Electrical length: 2.5 µs
Operating temperature: 0° to 45°C ambient
Relative humidity: 0% to 90% non-condensing
Indicators and ControlsIndicators: •Inputvideopresent•Power•Fault(EDH)•Outputvideolevelwarning
Front edge controls: •Standardselection•Videogain•Outputtiming•Componentgainadjustments(Y/G,Cb/B,andCr/R)•Synclevel•Inputformat•Blanking
Remote: All indicators and controls via frame Ethernet
8950DAC Component D-to-A Converter
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
NTSC/PALInput
SDIOutput
SDIOutput
SDIOutput
NotUsed
SDIOutput
DelayData
625Reference
Input
525Reference
Input
Loopthru
8900V-R
Micro-processor
Decoder12-bitADC
OptionalFrame SyncSubmodule
EDHInsertion
TestSignal
Generator
AnalogFilter
RS-232Audio Delay
LEDs
Reference
SDI
Remote
10-bit SDI
LocalControls
NTSC/PALLoopthrough
72
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear.
8960DECNTSC/PAL to SDI decoder
Featuring 12-bit A-to-D and adaptive decoding, the 8960DEC provides broadcast-quality serial component digital video to help transition from an analog to a digital facility. A unique capability of the 8960DEC is that by adding the 8900FSS frame sync sub-module you get a full frame synchronizer or a frame delay.
Key Features12-bit A-to-D quantization•
VBI data line processing•
Adaptive filters for optimal 2D decoding•
Proc. amp controls for luma, black, •chroma, and hue
EDH insertion to track signal errors•
Frame sync/delay submodule for low-cost •system timing
Picture positioning adjustments•
Reference signal inputs with removable •terminations to allow looping
Built-in test signal generator•
Remote control via frame Ethernet I/F•
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating6.5 Watts – single slot
InputSignal type: Compositeanalogvideo;SMPTE170Mfor NTSC and CCIR624 for PAL
Connector: High Z differential loop-through BNC
Return loss: >40 dB to 5.5 MHz
CMR: 60 dB @ 50/60 Hz
Reference InputNumber of inputs: Two
Signal type: SMPTE 170M (525 lines) or CCIR624 (625 lines)
Connector: BNC
Impedance: 75Ω or High Z (jumper-selectable) allows external looping
Return loss: >40 dB to 5 MHz
OutputNumber of outputs: Four
Signal type: Serial component digital video conforming to SMPTE 259M
Connector: 75Ω BNC
Return loss: >15 dB to 270 MHz
Rise/fall times: 700 to 900 ps (20% to 80% amplitude)
PerformanceQuantization: 12-bit
Processing accuracy: 10-bit
Luma frequency response: ±0.1 dB to 5.5 MHz
Chroma (r-Y, B-Y) response: ±0.5 dB to 1.3 MHz
Chroma/luma delay: <10 ns
Luma non-linearity: <0.15%
Signal-to-noise ratio: >60 dB to 5.5 MHz
Electrical length: One line + 2 µs
V blanking: Passed or blanked user-selectable dataline processing
Operating temperature: 0° to 45°C, ambient
Relative humidity: 0% to 90% non-condensing
Indicators and ControlsIndicators: Input video present, fault, power, line rate
Controls: Input video gain, luma level, black level, chroma level, hue, filters, vertical blanking, test signal, output timing (w/8900FSS)
Remote: All controls and indicators via Ethernet
8960DEC NTSC/PAL to SDI Decoder
For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Loopthru
SDI Input
625 NTSCReference
ReclockedSDI
Outputs
NTSC/PAL Outputs
NTSC/PAL Outputs
ReclockedSDI
Outputs
525 NTSCReference
8900V-R
Micro-processor
SDI
NTSC/PAL
HorizontalGenlock
CrossColorFilter
10-bitEncoder
OptionalFrame SyncSubmodule
OutputFilter
ColorFrame ID
Remote Reference
Reclocker
LocalControls
SDILoopthrough
73
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear.
8960ENCSDI to NTSC/PAL encoder
The 8960ENC converts a serial component digital signal to NTSC or PAL composite analog. It can interface with analog VTRs, composite analog production switchers and analog transmitters, and accepts the 8900FSS sub-module to allow output to be synchronized to an external reference and accurately timed.
Key Features10-bit signal processing•
Four NTSC/PAL outputs•
Two reclocked SDI outputs•
Proc. amp controls: luma, black, chroma, •and hue
Full frame output phasing with 8900FSS •submodule
Vernier timing controls •
Two built-in confidence test signals•
Dual reference inputs for multiformat •facilities
EDH detection to track signal errors•
Remote control via frame Ethernet I/F•
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating6.5 Watts – single slot
InputType: SMPTE 259M, 10-bit, 270 Mb/s serial component digital
Connector: High Z differential loop-through BNC
Return loss: >15 dB to 270 MHz
Reference InputNumber of inputs: Two
Signal type: SMPTE 170M (525 lines) or CCIR624 (625 lines)
Connector: BNC
Impedance: 75Ω or High Z (jumper-selectable) allows external looping
Return loss: >36 dB to 5 MHz
Analog Video OutputNumber of outputs: Four
Signal type: SMPTE 170M for NTSC and CCIR624 for PAL
Connector: 75Ω BNC
Return loss: >40 dB to 5.5 MHz
Isolation: >46 dB to 5.5 MHz
Serial Digital OutputNumber of outputs: Two
Type: SMPTE 259M, 10-bit, 270 Mb/s serial component digital
Connector: 75Ω BNC
Output return loss: >15 dB up to 270 MHz
PerformanceQuantization: 10-bit
Accuracy: 9.2-bit
Differential phase: <0.5°
Differential gain: <0.9%
RMS SNR: >59 dB to 5.5 MHz
Output phasing: Full frame with 8900FSS submodule
Electrical length: 2.1 µs
Fine phase: 0 to 45 ns
Operating temperature: 0° to 45°C
Relative humidity: 0% to 90%
Indicators and ControlsIndicators: Input video present, reference present, communication active, power, fault
Controls: Output gain, luma level, black level, chroma level, hue, filters, vertical blanking, test signal, timing
Remote: All indicators and controls via Ethernet
8960ENC SDI to NTSC/PAL Encoder
For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular
Specifications Ordering Information
NTSC/PAL 1
NTSC/PAL 2
NTSC/PAL 3
NTSC/PAL 4
Timing
Timing
Timing
Timing
Reference
Composite In
Composite In
Composite In
Composite In
LoopingReference Input
SDI 1Output 1
SDI 1Output 2
SDI 1Output 3
SDI 1Output 4
VBI
VBI
VBI
VideoProc
VideoProc
VideoProc
VideoProcVBI
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900V-R
SDIOutput 1
SDIOutput 2
SDIOutput 3
SDIOutput 4
ReferenceInput
NTSC/PALInput 1
NTSC/PALInput 2
NTSC/PALInput 3
NTSC/PALInput 4
Loopthru
74
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear.
8964DECFour-channel NTSC/PAL to SDI to decoder with line synchronizer
8964DEC-FSDecoder with frame synchronizer
The 8964DEC offers four independent full-function decoders on a single Gecko series card. Typical applications include cost-effective analog conversion for a digital server, switcher, or router. Up to 40 decoders can be housed in only 2 RU of space.
The 8964DEC has a robust analog input circuit, which easily accommodates noisy signals such as satellite and microwave links. Most adjustments to this card can be performed on the module’s card-edge controls. The on-screen display capability included with each module greatly simplifies card-edge configuration.
Key FeaturesFour NTSC/PAL to 270 Mb/s SDI decoders •
On Screen Display (OSD)•— Configuration information keyed onto
video output simplifies local card-edge controls
— Signal inputs NTSC or PAL— Supports NTSC with or without setup
Processing includes: clamping, AGC (sync •tip referenced), ACC (burst referenced)
Reference input NTSC/PAL analog color •black
Picture detail enhancement •
Four 270 Mb/s SDI outputs with •independent: — Line sync mode for horizontal timing— Proc. amp controls— Line-by-line VBI processing— Test signal generator, includes color
bars and pathological signals
Options:• — Frame synchronizer, offers full frame
output phasing
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating8.5 Watts – single slot
InputsNumber of inputs: Four, one for each decoder
Signal type: SMPTE 170M for NTSC and CCIR624 for PAL
Connector: Terminating 75Ω BNC
Return loss: >40 dB to 5 MHz
Reference Input Number of inputs: One NTSC/PAL (required for operation)
Signal type: Color black SMPTE 170M (525 lines) or CCIR624 (625 lines)
Connector: Looping 75Ω BNC
Return loss: >36 dB to 5 MHz
OutputNumber of outputs: Four, one for each decoder
Signal type: SMPTE 259M, 10-bit, 270 Mb/s serial component digital
Connector: 75Ω BNC
Return loss: >15 dB to 270 Mb/s
PerformanceQuantization: 10-bit
RMS SNR: > 59 dB to 5.5 MHz
Output phasing: ±1/2 line, with line synchronizer, full frame with frame synchronizer option
Electrical length: 1.4 ms
Operating temperature: 0° to 45°C
Indicators and ControlsIndicators: Input video present, reference present, communication active, power, fault
Controls: Output gain, luma level, black level, chroma level, hue, filters, vertical blanking, test signal, timing
8964DEC Four-Channel NTSC/PAL to SDI Decoder
For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular
Specifications Ordering Information
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900V-R
SDIInput 1
SDIInput 2
SDIInput 3
SDIInput 3
ReferenceInput
NTSC/PALOutput 1
NTSC/PALOutput 2
NTSC/PALOutput 2
NTSC/PALOutput 2
Loopthru
NTSC/PAL 1
NTSC/PAL 2
NTSC/PAL 3
NTSC/PAL 4Timing
Timing
Timing
Timing
ReferenceLoopingReference Input
SDI 1
SDI 2
SDI 3
SDI In
SDI In
SDI In
SDI InSDI 4
VideoProc
VideoProc
VideoProc
VideoProc
CompositeOut
CompositeOut
CompositeOut
CompositeOut
VBI
VBI
VBI
VBI
75
This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear.
8964ENCFour-channel SDI to NTSC/PAL encoder with line synchronizer
8964ENC-FSFour-channel encoder with frame synchronizer
The 8964ENC is a high-density, four-channel module that converts four 270 Mb/s serial component digital signals to four NTSC or to four PAL composite analog outputs on a single module. Typical applications include cost-effective analog VTR interfaces, composite analog production switcher inputs, and analog transmitter feeds. Up to 40 encoders can be housed in only 2 RU of space. Most adjustments to this card can be performed on the module’s card-edge controls. The on-screen display capability included with each module greatly simplifies card-edge configuration.
Key Features10-bit signal processing•
Four 270 Mb/s SDI to NTSC/PAL encoders•
On Screen Display (OSD)•
Configuration information keyed onto •video output simplifies local card-edge controls
Outputs four independent NTSC or PAL •video signals:— Supports NTSC with or without setup— Proc. amp controls— Line-by-line VBI processing— Confidence test signal generator
Options:•— Frame synchronizer, offers full frame
output phasing
Supported Frame TypesGeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating8.5 Watts – single slot
InputsNumber of inputs: Four, one for each encoder
Signal type: SMPTE 259M, 10-bit, 270 Mb/s serial component digital
Connector: Terminating 75Ω BNC
Return loss: >15 dB to 270 MHz
Reference InputNumber of inputs: One NTSC/PAL (required for operation)
Signal type: Color black, SMPTE 170M (525 lines) or CCIR
Connector: Looping 75Ω BNC
Return loss: >36 dB to 5 MHz
OutputsNumber of outputs: Four, one for each encoder
Signal type: SMPTE 170M for NTSC and CCIR624 for PAL
Connector: 75Ω BNC
Return loss: >40 dB to 5.5 MHz
Isolation: ≥60 dB to 5.5 MHz
PerformanceQuantization: 10-bit
Response: ±0.1 dB to 5.5 MHz
Differential phase: <0.5°
Differential gain: <0.9%
RMS SNR: >60 dB to 5.5 MHz
Output phasing: Full frame with frame synchronizer
Electrical length: 2.1 µs
Hue: ±22.5
Operating temperature: 0° to 45°C
Relative humidity: 0% to 90%
Indicators and ControlsIndicators: Input video present, reference present, communication active, power, fault
Controls: Output gain, luma level, black level, chroma level, hue, filters, vertical blanking, test signal, timing
Remote: All indicators and controls via Ethernet
8964ENC Four-Channel SDI to NTSC/PAL Encoder
For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular
Specifications Ordering Information
76 7600REF Reference and Test Signal Generator
The 7600REF reference and test signal generator is a high-stability standalone 1 RU unit for providing system timing. It has a complete set of reference signals, including a master Genlock reference loop-through input. It can be used in either master or slave roles. A powerful feature is timecode generation, as well as a complete set of reference signals, allowing for a very compact timing solution. Reliability is a top feature of the 7600REF with dual-redundant power supplies and the ability to interface to the 7620PX changeover unit for backup.
For versatility, the 7600REF has no less than five individually timed analog black and burst reference outputs. In addition, three SDI feeds provide individual test signals, including full-field signals where each can be separately configured. A full set of audio test signals are provided with analog audio available as well as unbalanced AES and embedded audio outputs.
The 7600HD option provides for an additional four Tri-level sync outputs and a full set of HD test signals.
The timecode generator options allow for a versatile solution to timecode. Longitudinal and vertical interval timecode LTC and VITC can be output.
The 7600REF can act as an NTP server ensuring IT-based units keep in step with the broadcast infrastructure. The time generated can be set from GPS satellites through the 7600GPS option. This makes the 7600REF an ideal unit for OB operation.
Key Features High-stability reference generator for •system master or local slave roles
Sophisticated timecode generator option •for a complete compact timing solution
Five individually timed analog black/burst •outputs
Four Tri-level sync outputs with 7600HD •option – all co-timed with one selectable Black Burst output of the same frame rate
High stability outputs (0.5 Hz accuracy) •
Redundant power supplies standard •
Can be used with 7620PX changeover for •fully redundant operation
Simultaneous multi-standard outputs •
Three dedicated individual SDI black/test •signal outputs, with HD signals through 7600HD option
Full-field test patterns (including FuBK) •
Analog audio, AES (including GLITS), and •embedded audio test signals
GPS receiver option •
Optional NTP server for locking IT system •and video system
Set-up and control via simple-to-use front •panel display
Ethernet TFTP client for easy software •upgrade and new test pattern download
Applications Dual-redundant master reference •generator
Local slave reference generation •
Compact complete timing solution with •reference and timecode generation
Reference generation for locking IT •system and video system together
7600SD-REF SD video (analog and SD-SDI) and audio reference and test signal generator with dual power supplies
7600HD-REF SD/HD video (analog and SD/HD-SDI video) and audio reference and test signal generator with dual power supply – includes 7600SD-REF features plus TLS output HD-SDI test pattern
7600MHD-REF SD/HD master timing generator – includes 7600HD-REF features plus GPS receiver, unbalanced AES, timecode generator, and NTP client/server
7620PX Changeover unit for use with two 7600REF generators
(see 7620PX datasheet for details)
For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular
Inputs Genlock: One input (with loop-through)
5/10 MHz reference: One input
Outputs Analog video: Five standard outputs 625/525 (black burst and test)
SD/HD SDI: Three (SD/HD test) SD standard, HD optional
AES: Two balanced (AES 2003-11) 32/44.1/48.96 kHz, two unbalanced with 7600MHD-REF version
Analog audio: Two channels
27 MHz/10 MHz/word clock: One standard
LTC/VITC: Two (optional)
GPS Receiver (7600MHD-REF)•One5Vantennainput•OnePPSoutput
Performance Accuracy: <±0.5 Hz (0.1 ppm)
Temperature stability: < 0.1 ppm
Aging: <3 Hz per year
Genlock offset: ±4 fields in 1 ns step
Genlock phase: 0-350° in 0.1° steps
Black burst and test signal: ±4 fields in clock steps
SDI back and test signal: ±2 fields in clock steps
Tone frequency: 100 Hz to 10 kHz in 100 Hz steps
Tone amplitude: 0 dB to -40 dB in 1 dB steps (L&R)
Control and Monitoring Front panel display with configuration menu access
GPI: •Twoconfigurableinputs•Twoconfigurableoutputs
Network interface: TFTP download
Slave configuration retrieval from master
Power 90 to 260 VAC, 47 to 63 Hz, 75 VA
WeightMax. 5.2 kg fully equipped
Dimensions Height: 44 mm (1 RU)
Width: 483 mm
Depth (excluding connectors): 400 mm
Environmental Operating temperature: +0° to +50°C
90-260V2A-1A
AES
AES 1
4 3 2 1 4 3 2 1
3 2 1 5 4 3 2 1AES 2 GPS 1 PPS
10/27/WC OUTANALOG AUDIO/REMOTESETHERNET 5/10 REF IN LTC
90-260V2A-1A
47-63HzAC ONLY
47-63HzAC ONLYLOOP
GENLOCKTEST
BB/ANALOG
TESTSIGNALS
SD/HD SDI
TRI-LEVEL SYNC
OK
CANCELADJUST
SDI ANALOG AUDIO OPTIONS LOCKMODE
SETUP STATUS
VIDEO
REFERENCE SIGNAL GENERATOR 7600REFREFERENCE SIGNAL GENERATOR 7600REFOK
CANCELADJUST VIDEO
SDI ANALOG AUDIO OPTIONS LOCKMODE
SETUP STATUS
Specifications Ordering Information
77
For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular
7620PX Changeover Unit
7620PX 7620PX series changeover unit
Standard Configuration Two triple-switching relay modules providing:•Sixindependentinputpairs,primaryandsecondary
with relay-protected output (12 inputs/6 outputs) monitored for sync pulse and color burst levels
•Changeoverswitchedbyrelay •Idealformonitoring analog video, Black Burst,
Tri-level sync, and other test signals with sync pulse and color burst levels
Two dedicated Black Burst monitoring/ changeover modules, each providing:•Primaryandsecondaryinputsfeedingoneswitching
output•Connectors: BNC
One dedicated SDI monitoring/changeover module with:•PrimaryandsecondaryHDorSD-SDIinputfeeding
one switching output•Changeoverswitchedbyactivebuffers •Connectors:BNC
Two AES/EBU monitoring/changeover switches, each with: •MainandreserveAES/EBUaudioinputandoutput
available through the AES/EBU 15-pin Sub D connector
•Maybeconnectedasbalancedorunbalancedaudio
Control and Monitoring
Local: switches and LEDs
GPI I/O: D-25 connector
Power 220/240V, 40VA max.
Weight Max. 5.2 kg fully equipped
Dimensions Height: 44 mm (1 RU)
Width: 482.6 mm
Depth (excluding connectors): 435 mm
EnvironmentalOperating temperature: +0° to +50°C
Key FeaturesTwo triple-switching relay modules •monitor sync pulse and color burst for six independent signal pairs, such as Black Burst, Tri-level sync, analog video, and other test signals
Two dedicated Black Burst monitoring and •changeover switches
One dedicated SD/HD-SDI monitoring and •changeover switch with battery backup
Two AES/EBU monitor and changeover •switches (balanced or unbalanced)
Manual or automatic changeover with •delay management for preventing switching on glitches
Robust operation with simple local •configuration and control, including LED status display
GPI interface for remote control and •monitoring
Two hours of backup battery in case of •power failure for powering the internal alarm and providing power to the SDI montioring/changeover module
Switching to main inputs by default in •case of power failure
ApplicationsDual-redundant master 7600REF reference •generator
Redundancy for any vendor reference and •test signal generator
The 1 RU standalone 7620PX changeover unit is the complement of the 7600REF reference and test signal generator. It provides active monitoring and switching of reference and test signal input pairs. Each signal pair has a primary and secondary input feeding a switching output. The unit includes battery backup and local and remote alarm alerts for power loss.
Each unit has two triple-switching relay modules, each with three independent sets of primary and secondary inputs feeding a relay-protected output. These switches monitor sync pulse and color burst, typically used for SPG feeds, test signals, or pulse outputs. Also included are two dedicated black burst monitoring/changover switches, and one dedicated SDI monitoring/changeover switch.
Dedicated AES/EBU audio monitoring and changeover for two audio inputs are provided via a 15-pin connector. The audio can be connected as balanced or unbalanced.
The unit can be configured locally with front panel switches. Unit and input status are provided by LEDs on the front panel. Monitoring and remote control are also available through a 25-pin remotes connector.
7620PX
LOCKLOCK
7620PX
LOCKLOCK
Supported Frame TypesGeckoFlex with 8900NET (Net Card) for configuration
Power Rating9.0 Watts – dual slot
InputsSD/HD-SDI or ASI: Three• Input equalization: up to 125m HD/330m SD/ASI
(when signal is not bypassed)•Formatssupported:[email protected],50,
720p @ 59.94, 50, 480i @ 59.94 576i @ 50•DVBASI:yes
OutputsProtected outputs: One
Insertion loss on protected output when bypassed: Equivalent to less than 20m of Belden 1694A cable
Return loss: <15 dB (when signal is not bypassed)
Distributed outputs: Seven
Return loss: <15 db
GPI•Switchtoprimaryinput•Switchtosecondaryinput•Switchtoalternateinput
GPOPrimary input status (failed/good)
Secondary input status (failed/good)
Alternate input status (failed/good)
Switch state (primary/secondary/alternate)
Control and MonitoringSNMP: Monitoring and switching control
Web page configuration: Yes
Local configuration: Switching control only
Newton support: Yes
NetConfig support: Yes
SpecificationsSpecifications
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames and it requires two slots.
8972PXSD/HD/ASI protection switch, front and dual rear module set
8900PX-DBS D-connector backshell option, fitting with rear high density
Ordering Information
78
SwitchableDistributed
Out
PrimaryIn
RelayProtected
Out
SwitchableDistributed
Out
SwitchableDistributed
Out
SwitchableDistributed
Out
GPI I/OSwitchableDistributed
Out
MainDistributed
Out
SecondaryIn
Alternate in
SwitchableDistributed
Out
8900PX-DRJ1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Key FeaturesTwo-input robust failure-proof changeover •switch
Third alternate input, available for •switching, non relay-protected
Supports HD-SDI, SD-SDI, and DVB ASI •with auto-sensing capability
Will maintain signal path in the event of •power failure or when the front card is removed
Eight outputs, including:•— One main relay-protected output with
passive bypass path— One electronic output follows main — Three output pairs can be set to follow
main or backup or can be switched to primary, secondary or alternate inputs
Line switching in driven switch mode •(SD/HD-SDI syncronous input signals)
External control via GPI or Ethernet •
Autonomous control by:•— Signal (carrier) loss detection — Incorrect signal format — EDH/CRC error (selectable threshold)— DVB-ASI PID loss — DVB-ASI packet loss
GeckoFlex dual-slot rear module •
Asserting external control of the •module automatically turns off autonomous control
ApplicationsSelect between primary, secondary, and •alternate inputs paths
Switch to alternate input (i.e., apology •slide) when primary and secondary inputs are both failing
The 8972PX is a full-time signal protection switch. It is a highly robust primary/secondary changeover switch for HD-SDI, SD-SDI, or ASI signals. It can be controlled by autonomous switching to a backup signal using in-built detection of signal failure, switched by manual controls, or driven by an external GPI system to switch on command.
The 8972PX fulfils the basic requirement of any protection system by not adding failure modes to the existing signal path. In the event of a power failure, or even if the front control module is completely removed, the Program Output signal will continue to pass from the previously selected input as a fail-safe relay path will latch the selected signal to the output. In driven mode it can be configured by GPI or Ethernet.
All parameters can be configured via the web browser interface and main parameters via the Newton Control Panel. NetConfig and NetCentral are supported respectively for remote configuration and product health monitoring. Asserting GPI control or other manual controls will disable autonomous control.
8972PX Protection Switch
FRONT MODULE
REAR MODULE
Primary MainProtectedOutput
MainDistributed
Output
SwitchableDistributed
Outputs
Secondary
Equalization& Reclocking
InputSignal
Monitors
ConfigurableOutputPairs
SwitchManager
Equalization& Reclocking
Equalization& Reclocking
Alternate
GPI In
NetworkControl
GPIControl
Backup
Main
GPI Out
Bypass Relay Controls
LatchingRelay
Control
GPI In
NetworkInterface
GPI Out
AutonomousControl
LocalControl
NetCentral continuously monitors the status and condition of switchers, routers, servers, modular, and many other types of broadcast products from one central location. Using the Simple Network Management Protocol (SNMP) and Syslog protocols, NetCentral software lets you link any electronic document—from engineering drawings and floor plans to rack elevation and signal-flow diagrams—with device alerts.
NetCentral software consists of a manager, optional clients, product-specific device providers, and agents. The agents run on the monitored products, such as the GeckoFlex, Gecko, and Kameleon™ frames, and report individual device conditions to the manager. The manager monitors any product for which a corresponding device provider is installed. Web clients provide similar status-reporting capabilities as the manager from remote workstations through a Web connection. Product agents are designed to report any status changes, especially those that may impact a device’s operation or integrity.
When an alert happens, NetCentral classifies device messages into three main categories: informational, warning, or critical. Informational messages simply inform you about status changes that do not impact device operation. Warning messages inform you about situations not requiring any immediate action, but that will need some preventive action to avoid potential degradation (i.e., a rising internal temperature on a device due to a fan failure).
Continuous local/remote device •monitoring via TCP/IP network using SNMP or Syslog protocols
NetCentral manager information can be •accessed from any workstation running Microsoft Internet Explorer
Active views allow device information to •be accessed by clicking on the device shown on a floor plan, rack elevation, map, photograph, or other HTML page
Programmable alert notification via •e-mail, pager, program launch, or graphical user interface
Automatically discovers new devices as •your facility expands
Powerful logging and reporting tools with •automatic backup and archiving features
Graphical representation of log messages •for easy problem identification
History management – annotate and •acknowledge messages
Sophisticated monitoring of disk arrays, •fans, and redundant power supplies to alert operators of potential problems before they become critical
Any SNMP-enabled product can be •monitored
Tri-level security model•
Flexible framework supports addition of •device plug-ins, constantly allowing new classes of devices to be monitored
Key Features
Specifications Ordering Information
NETCEN-MGRNetCentral 5.2 manager license
NOTE: The NetCentral license for modular products is included with the 8900NET and 2000NET modules.
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
79
NetCentral Platform Requirements2 GHz Pentium 4 PC with 1 GB RAM minimum, Windows 2000 Professional SP4, Windows XP Professional SP2 or higher
NOTE: PCs are customer-supplied equipment
NetCentral ActionsConfigurable notification mechanisms include:
Beep•Trigger a GPI•E-mail•Play audio file (.wav)•Run program (.exe)•Launch URL•Send windows messages•Close replay•
•DisplaymessagesonAvitech
NOTE: E-mail and paging functions require a customer-supplied Internet mail server
NetCentral 5.2 Comprehensive Remote-Monitoring Software
8080 GeckoFlex Module Control
Key FeaturesSupports multiple configuration options:•— Standard Web browser— Newton control panel— Supports remote configuration and
SNMP-based monitoring via NetConfig and NetCentral software
GeckoFlex solutions support a number of IT-based control options when used in conjunction with an 8900NET (Net Card) Network Interface module.
Configuring GeckoFlex products and adjusting their parameters could not be easier, as it requiresonlyastandardWebbrowser;sothereis no special software to download. However, to make the configuration of a system even easier, the Grass Valley NetConfig application is available to help structure your system view in the same browser.
You can also use a Newton Ethernet-based control system panel to configure GeckoFlex products. This 1 RU hardware panel can provide an ideal real-time operating environment via control of parameters on a GeckoFlex module or combination of modules. You can configure your own preferred set of parameters and map them to Newton controls. You can leave out controls that are unnecessary, or dangerous, and combine controls from multiple modules. In this way the Newton system provides a “front panel” for complete systems—creating virtual products.
As an Ethernet-based product, the Newton system can be positioned wherever your operators need it most. A soft-panel version is also available that will run on a Windows PC, saving space where a PC is already available or where PC operation is preferred.
For remote configuration and signal-health monitoring, all GeckoFlex solutions support the Grass Valley NetConfig and NetCentral software products.
Please note that some GeckoFlex modules support front-of-card controls and others are configurable only over a network connection. Please consult a module’s particular specifications for complete details.
Newton Hardware Control PanelVideoProc
Sat4
VideoTiming
Sat5
AudioProc
Sat6
MasterControl
Sat7
Studio
Sat8
Edit
Sat9
Assign
Route
Monitor
Enable
Ident
NEWTONMODULAR CONTROL
Instant Control of Multiple Modules
You need only a standard Web browser to configure and adjust the parameter of a GeckoFlex module. You can also use the Newton control panel for fast, multi-knob access to any combination of modules in a signal-processing path.
NetConfig Application
With a comprehensive set of powerful tools, the NetConfig application lets you precisely define hardware and software control panel functions. Additional tools for IP configuration and software updates make NetConfig a valuable engineering package.
m o d u l e o r d e r i n g g u i d e
81
Key Features
Newton Modular Control System
C o m p r e h e n s i v e , C o n s o l i d a t e d C o n t r o l f o r M o d u l a r P r o d u c t s
The shift to digital infrastructures has brought with it increasingly complex signal-processing paths. The Newton modular control system gives you fast, multi-knob, Ethernet-based access to Grass Valley modular products in a processing channel.
Two abilities distinguish the Newton system from other approaches to modular control: the separation of system-level configuration tasks fromoperationalones,thusminimizingthepotentialforon-airmistakes;and the ability to group modular products—regardless of their physical locations—into a logical signal path (or channel) that you can easily access and manipulate.
Using the Newton system, you can instantly access the Grass Valley Gecko, GeckoFlex, and Kameleon modular products in a particular signal path—even if they’re in completely different racks or facilities. You can adjust module parameters from a rack-mounted Newton control panel or a software control panel running on a standard Windows PC. There’s even a button for locking out the control panel to prevent accidental changes.
The Newton system also includes the Grass Valley NetConfig software. Using it, you can assign IP addresses to Gecko, GeckoFlex, and Kameleon frames for easy network identification and set initial operational parameters. Additionally, the NetConfig application works with the Encore™ router control system and Grass Valley routers.
By separating configuration and operational tasks, the Newton system can simplify your workflows significantly. Instead of painstakingly attaching a serial cable to the back of every modular product you need to initialize, you can use NetConfig to set baseline functional operational parameters over a network. Operators can make adjustments to those parameters using Newton control panels, without having to wade through complex configuration menus.
The Newton system features two control panels: a rack-mounted version and a software-based version. You can have any combination of these panels on your network in any number. You configure these panels using a configurationplug-inapplicationtoolontheNetConfigapplication;youcanalso use this tool to restrict channel-path and device access on a panel-by-panel basis.
The Newton modular control system supports optional integration with the Grass Valley Encore router control system. It’s a great way to quickly switch sources and adjust signal parameters within configured processing channels.
You can also use the Newton system to monitor destinations on the routing system so that, when a source changes, the modules in the appropriate input signal-processing channel automatically appear on the Newton control panel.
To help maximize uptime, the Gecko, GeckoFlex, and Kameleon products support the Grass Valley NetCentral application for Simple Network Management Protocol (SNMP)-based monitoring.
Ethernet-based control of Grass Valley •Gecko, GeckoFlex, and Kameleon modular products
Control panels:•— Compact 1 RU rack mount panel— PC soft-panel application with same
functionality — No limit to the number of panels on a
network— Operation independent of configuration
Includes NetConfig application and •configuration plug-in tool for:— Network-wide device configuration— Control panel configuration
Control panel functions:•— Four user-configurable control knobs to
update device parameters — Twelve soft keys for quick recall of user-
configurable parameters— Simple up/down, left/right navigation — Each panel supports 128 channels with
12 setups each— Clearly visible status of controlled devices — Enable button locally disconnects knobs
and buttons from devices— Identify button reveals identity of
controlled devices
Additional hardware panel features:•— Easy-to-read green display w/adjustable
intensity — Combination of soft buttons and
dedicated function buttons with adjustable backlighting intensity
Requires only two simple connections: •RJ-45 Ethernet and IEC AC mains
Optional Encore routing control system •integration: — Source selection with automatic source
delegation — Destination status monitoring
Newton Modular Control System82
NetConfig Tools
With a comprehensive set of powerful tools, hardware and software control panel functionality can be precisely defined. Additional tools
for IP configuration and software updates makes NetConfig a valuable engineering package.
Newton 1 RU Hardware Control Panel
Newton Software Control Panel with Router Control
VideoProc
Sat4
VideoTimin
Sat5
AudioProc
Sat6
Master
Sat7
Studi
Sat8
Edit
Sat9
Assig
Route
Monit
Enabl
Ident
NEWTONMODULAR CONTROL
User-Defined Keys Navigation Keys Signal Adjustment Knobs
Route
Comprehensive Control Architecture
Grass Valley modular products have long had a variety of control and monitoring capabilities, from simple local card edge control to more complex local control with on-screen parameter displays—as well as network interface modules such as the 8900NET and 2000NET products whose built-in Web servers relay module-related information to a standard PC- or Macintosh-based Web browser.
Certainly you could use these products to configure, access, and even adjust signal parameters. But more and more, the complexity of the signal-processing path—and the sheer number of devices in it—calls for easier access and real-time, comprehensive, on-air control.
The Newton control system lets you quickly access all of the Gecko, GeckoFlex, and Kameleon modules in a signal-processing path to make audio, video, and timing adjustments. You can make these adjustments from a rack-mounted control panel, a software control panel running on a standard PC, or a combination of both. There is no limit to the number of control panels you can have on the network.
Yet your Gecko, GeckoFlex, and Kameleon modules do not need to be located in the same frame for the Newton system to control them—or even the same facility. Because the system runs on standard TCP/IP networks, an Ethernet connection across a LAN or WAN gives you complete signal-processing control.
Powerful Control Panel Provides Fast, Easy Adjustments
The hardware version of the Newton modular control panel was designed with operator ergonomics in mind. It features four, simultaneously active, user-configurable knobs that update modular product parameters in real time. Each has a tri-color LED that indicates the health of a connection, providing immediate feedback of module or signal condition.
The Newton system also features 12 configurable buttons. You can configure them to do everything from recall a signal-processing path setup to perform a source take or recall a router destination.
When you press one of these 12 buttons, the Newton system automatically displays the current settings above four knobs. You can then use these knobs to adjust specific signal parameters. Using the intuitive interface, you can also scroll through additional setups and signal processing channels.
Newton Control Panels
The ergonomic design of the Newton hardware control panel is emulated in a software version, shown here with optional router control.
83Newton Modular Control System
The Newton control panel also features a local enable/disable button that you can engage to prevent inadvertent changes, should someone accidentally brush against a knob.
The software control panel of the Newton system offers the same, powerful features as the hardware version.
The Newton system includes a configuration tool that is a plug-in to the NetConfig application. Not only does this tool provide fast, network-based control-panel configuration, it offers an additional degree of security, as control access to your signal-channel paths on a panel-by-panel basis.
The Newton control panels support up to 128 configured channels each with up to 12 setups—a setup is a subset of a channel that contains knob assignments—within each configured channel. There is no limit, however, to the number of control hardware or software panels that can reside on a Newton system-controlled network.
Easy Setup, Customization
The Newton control system includes the NetConfig application for configuring a module’s system and operational parameters. You can also use it to download software updates into the modules.
Because the NetConfig application runs over your network, it centralizes and accelerates your configuration tasks. You do not need to physically visit every device in your racks, plug in a serial cable, and load its parameters. You can do everything you need to do from your desktop.
More important, separating the configuration tasks you perform using the NetConfig application from the everyday operational tasks you perform with the Newton control panels simplifies your workflow and minimizes potential on-air mistakes.
The NetConfig application simplifies Ethernet-based network configuration and maintenance by providing a simple method to set IP addresses over the network—eliminating the need for separate serial connections to each frame during the system commissioning.
Complete Control of Modules
The Newton control panel provides immediate access to four control parameters at once. Using the left and right arrow keys, you can quickly
step through additional adjustment parameters.
Newton Hardware Control Panel
GeckoModule Control
Ethernet Facility LAN
VideoProc
Sat4
VideoTiming
Sat5
AudioProc
Sat6
MasterControl
Sat7
Studio
Sat8
Edit
Sat9
Assign
Route
Monitor
Enable
Ident
NEWTONMODULAR CONTROL
Gecko Frame
8900NETEthernetInterface
84 Newton Modular Control System
In addition to Gecko, GeckoFlex, and Kameleon products, the NetConfig software can identify and configure routing control systems anywhere on the Ethernet LAN or WAN to set IP address, subnet mask, and gateway network configuration—all through an intuitive interface.
With your devices configured, you can use the NetConfig application to view them all by IP address or configured device name. Additionally, it can also generate a facility view with hyperlinks from a user-supplied diagram or picture. This range of viewing options makes it easy to locate devices on the network, update software as necessary, and pull up the Web pages generated by Gecko and Kameleon modules to adjust individual module parameters.
While control of individual module parameters is available within the NetConfig application, the signal-processing complexities of most facilities is such that you should consider using the NetConfig software to set up basic parameters of the individual modules and then configure Newton modular control panels for day-to-day operational requirements.
Using the plug-in configuration tool for the NetConfig system, you can configure the Newton system’s control panels. Doing so is a straightforward process of naming a new signal-processing path—a channel—that includes an individual module or a string of modules. Next, you define the adjustable parameters or setupsforeachchannel;setupscould include such things as audio modes, video processing, or timing. Each setup contains the assignment for each of the four control knobs.
Consider the situation of a television station whose incoming satellite feed requires video analog-to-digital conversion with processing and timing adjustment, along with multichannel audio processing and delay. Using the NetConfig application and configuration tool, you create an easy-to-remember name for the processing channel which includes all the modules in the path, such as SAT_5. Now, you only need to drag and drop the selected modules into the configuration tool and select the parameters you want an operator to be able to adjust.
In fact, the SAT_5 channel may have a number of adjustment parameters that need to be controlled, such as video gain, black level, hue, horizontal and vertical timing adjustments, audio levels, and audio processing functions such as sum, swap, and phase invert. You can store these parameters as nested setups then navigate through them using the Newton system’s control panel. As you do, the Newton system recalls the current module parameters and presents them in the display over each of the four control knobs. Each knob takes on the functionality required for the parameter recalled, be it continuously variable control (such as gain) or enumerated steps (such as black clip on/off).
Once you complete the setup of your control panel, you can copy it to an offline storage system, edit it if need be, and load the resulting file to any other control panel on the network. For example, a studio can easily define, store, and reload the appropriate control panel configuration settings for a weekly game show production. Similarly, a mobile production unit can load standard configuration files to switch from outdoor baseball to indoor basketball.
For increased security, the configuration plug-in tool within the NetConfig application lets you specify the control available to each panel on your network. You can permit or deny access to any frame, module, or adjustment parameter.
Gecko Video Frame
Newton Hardware Control Panel
Gecko Audio Frame
8960DECControl
8960DEC
8921ADTControl
8921ADT
8960DECVideo A to D
8921ADT4 Ch Audio A to D
IRDAnalogVideo
DigitalVideo
4 Ch Analog Audio
AES 1
AES 2
AES 1
AES 2
ConcertoMulti-Format Router
8960DECVideo A to D
8921ADT4 Ch Audio A to D
IRD
4 Ch Analog Audio
Ethernet Facility LAN
8900NETEthernetInterface
8900NETEthernetInterface
Sat 5
Sat 6
VideoProc
Sat4
VideoTiming
Sat5
AudioProc
Sat6
MasterControl
Sat7
Studio
Sat8
Edit
Sat9
Assign
Route
Monitor
Enable
Ident
NEWTONMODULAR CONTROL
Instant Control of Multiple Modules
The Newton control panel provides simultaneous access and control to any combination of modules in a signal-processing path. Additional processing paths can be selected using the up and down arrow keys or by selecting a user-configured soft key.
85Newton Modular Control System
Specifications Ordering Information
Newt-PC Soft-panel application CD-ROM includes: NetConfig application, Newton control panel configuration plug-in application for the NetConfig application, Newton Control Panel application, and system documentation in PDF format. Hard copy documentation is also supplied
Newt-RM1 RU hard panel includes: CD-ROM with NetConfig application, Newton control panel configuration plug-in application for the NetConfig application, and documentation in PDF format. Hard copy documentation is also supplied
Newt-RouteRouter control option: Router control interface for the Newt-PC and Newt-RM (for field upgrade of hard panels already installed). Allows all-level source takes and automatic connection to modules in the signal-processing channel. Option is enabled with Software Authorization key (requires Newton software version 2.0.0)
Newt-RM-RTXIncludes the Newt-RM option with the Newt-Route option already enabled
NetConfigIncludes: CD-ROM with standalone NetConfig application, and documentation in PDF format. No hard copy documentation is supplied
NetCentral Includes: CD-ROM with standalone copy of NetCentral Manager. Hard copy documentation is provided
8900NET (Net Card) Network Interface card for Gecko and GeckoFlex frames
Newton Software Control PanelRequires PC with Windows XP, 2000, or NT 4.0 and Internet Explorer v.5.5 or greater
Newton Hardware Control Panel
Power90 to 265 VAC, 47 Hz to 63 Hz, 15W max.
ConnectorsRJ-45 10/100Base-T Ethernet connector
Dimensions cm in.Height (1 RU) 4.4 1.7
Width 48.3 19.0
Depth 15.2 6.0
Weight 1.4 kg 3.0 lbs.
Optional Router Control
The Newton modular control system is designed to integrate with the Grass Valley Encore routing control system. With this optional router control interface, you can use the Newton system to make an all-level source take and automatically connect to the modules in the signal-processing channel.
While this approach is no substitute for the power of a dedicated router control panel, it is an excellent way to quickly switch sources and adjust signal parameters within configured input channels.
Using the optional router control interface, you can also monitor destinations on a routing system so that when a source changes, the modules in the input signal-processing channel for the selected source are automatically activated on the Newton system’s control panel.
Proactive Monitoring of Modular Products
To help maximize uptime, the Newton modular products control system supports the Grass Valley NetCentral software for Simple Network Management Protocol (SNMP)-based remote monitoring.
The NetCentral application offers continuous monitoring and user-programmable alerts in the event of equipment problems or device status changes. More important, this highly configurable application lets you link any electronic document—from engineering drawings and floor plans to rack elevations and workflow diagrams—with device alerts, so you can check the state of your facility at a glance and instantly assess the impact of any system status changes.
Interface Protocols
The Newton control system uses a standard Ethernet TCP/IP communications interface and a standard XML data format. An open published protocol specification is available upon request for third-party automation system developers.
Typical Applications
Quality analysis and control of satellite and microwave incoming feeds are an ideal application for these real-time control panels.
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
86
Key Features
GeckoFlex Frame
G e c k o F l e x M o d u l a r U n i v e r s a l F r a m e
Grass Valley products offer the most comprehensive, multi-format solutions for acquisition, production, storage, and playback—and a strong foundation for centralized, proactive status and activity monitoring.
From single- and multi-function modular products to an Ethernet-based control system for configuring and operating modules across racks and facilities, we offer a full range of signal-processing products, whatever the application.
A key component of our modular product range is the GeckoFlex frame, which is designed for small production settings, mobile environments, and professional audio video applications.
The GeckoFlex system is a flexible, cost-effective modular system built around a compact robust 2 RU frame. It can be used to build infrastructures that can handle the complete range of modern broadcast signals with just one enclosure type. The frame supports everything from audio to video signals, standard- to high-definition (SD/HD/3G) formats, and copper to fiber infrastructures.
Highly Serviceable
The GeckoFlex system is also the most serviceable system available. Its modules, dual power supplies, fans, 8900NET (Net Card) Network Interface module and reference distribution circuits can all be swapped out from the front of the frame. In fact, not only are the network interface cards swappable, but the IP address and the frame’s identity remain with the frame, not the card.
Because SD/HD/3G modules and most other modules provide industry-standard SNMP monitoring of signal formats and conditions—as well as the module’s operation, identification, and status—you can easily integrate a GeckoFlex frame into broadcast and IT monitoring schemes with an optional 8900NET (Net Card) module.
Fiber Ready
A unique feature of the GeckoFlex platform is a fiber-ready system that enables you to upgrade all SD/HD/3G modules to fiber inputs or outputs. These highly compact inputs and outputs, combined with our fiber-ready philosophy, makes these upgrades incredibly space-efficient: two fiber connections fit in the equivalent space of one BNC connector.
Calculating Power Consumption
To decide whether a particular set of modules will fit within a frame that does not have fan cooling (GeckoFlex Model 8900FX), simply add the rated power consumptions of the modules to be mounted in the frame. These power values can be found on the latest versions of the module’s data sheets, instuction manuals, and in the GeckoFlex frame documentation.
If the total power required by these modules is less than the power rating of the frame then it can support your application.
It it critical not to exceed the overall environment ratings for the frame. If you have any doubt or questions, please contact Grass Valley Professional Services for assistance (see last page).
2 RU, 10-slot high-density modular frame •with exchangeable rear panels
Powerful fan cooling option that can be •serviced from the frame front
Optional hot-swappable 8900NET (Net •Card) Network Interface module with Ethernet and RS-232 connections enables station-wide monitoring and configuration
Frame remembers its own IP address •and name so that network cards need no configuration after swapping
Hot-swappable modules•
Hot-swappable, dual-redundant power •supplies
Dual internal reference distribution buses •with module-level choices between bus 1, bus 2, and local (where fitted)
8900NET (Net Card) module also provides •any-browser configuration, and SNMP monitoring
Any-browser configuration makes setup •easy from all common Web browsers
Supports Web browser, NetCentral •monitoring, Newton control, and NetConfig configuration software
Supports all currently shipping Gecko •and GeckoFlex (8900) signal-processing modules by using suitable rear modules
87GeckoFlex Frame
Using Independent Reference Buses
The dual reference distribution buses of the GeckoFlex frame allow you to share genlock reference signals within the frame in several ways. Unlike conventional systems, the reference inputs are still available on individual cards and you can swap out reference circuits from the front of the frame to service them. The distributed reference can accept bi-level, tri-level, and AES audio sync inputs and feed all modules requiring a similar reference—saving on additional analog video distribution modules, frames, and the power dissipation associated with an old-fashioned reference system.
An 8900GEN-SM GeckoFlex Genlock submodule can be installed on a number of different GeckoFlex front modules in any 8900FFN frame. The submodule can provide a local external genlock timing reference to the host module it is mounted on or it can be configured to transmit external references to the entire GeckoFlex frame on one of two frame buses.
When a GeckoFlex host module with an 8900GEN-SM submodule is installed in slot 1 of an 8900FFN frame, it can be jumpered on the module circuit board to transmit the external reference signal connected to its rear module loop-through to Frame Bus 1. This Frame Bus 1 reference is then available for every module in the GeckoFlex frame. Any GeckoFlex module in the frame with frame sync capability can be configured to accept this reference.
Frame Bus 2 can be transmitted in the same manner from the GeckoFlex host module with an 8900GEN-SM submodule when the host module is installed in slot 3 of the frame. This bus is also fed to every slot in the GeckoFlex frame. The choice of which frame reference to use is made in configuration for each individual module with frame sync capability in the frame. This allows two independent references to be fed simultaneously to the entire frame as shown in the illustration below. Selection of the reference used is made in the individual module system configuration.
GeckoFlex Reference Distribution Buses
The module in Slot 3 has an 8900GEN-SM submodule and is jumpered to feed Reference Bus 2
The module in Slot 7 has an 8900GEN-SMsubmodule installed and can take in its ownreference by selecting Local Ref in configuration
The module in Slot 1 has an 8900GEN-SM submodule and is jumpered to feed Reference Bus 1
Modules in Slots 2, 4, 5, and 6take their reference from Frame Bus 1by selecting Ref 1 in configuration
Modules in Slots 8, 9, and 10 take their reference from Frame Bus 2 by selecting Ref 2 in configuration
12
34
56
7
98
10
Frame Bus 2
Frame Bus 1
88 GeckoFlex Frame
Using Redundant Reference Buses
The dual reference frame bus functionality of the GeckoFlex frame also allows for a redundant Primary/Secondary genlock reference configuration. This application (shown below) allows a genlock house reference to be designated as the Primary timing on Frame Bus 1 while a backup Secondary house reference can be configured on Frame Bus 2. If the Primary reference is lost, the module can be configured to automatically switch to Frame Bus 2 to take the place of the failed Primary reference. When the Primary timing source recovers, the user can configure the system to return to the Primary source automatically within a specific time period or reset the Primary manually.
To use this application, the front module in slot 1 must have an 8900GEN-SM submodule installed and jumpered to feed Frame Bus 1. The Primary genlock reference is connected to the looping reference input on the rear module in slot 1. The module is slot 3 must also have an 8900GEN-SM submodule installed with the module jumpered for Frame Bus 2 and a backup (Secondary) genlock signal connected to its rear looping input in slot 3.
Distribution of Frame Bus 1 from slot 1 and Frame Bus 2 from slot 3 cannot be changed, so plan the placement of your GeckoFlex modules for use of this functionality. It is also only available on modules that can accept the 8900GEN-SM submodule (those with frame sync capability).
The module in Slot 3 has an 8900GEN-SM submodule and is jumpered as Frame Bus 2 with a redundant Secondary reference signal connected to the rear loop-through to back up the Primary in case of failure
The module in Slot 1 has an 8900GEN-SM submodule and is jumpered as Frame Bus 1 with the Primary reference signal connectedto the rear loop-through
Any module in the frame with frame sync capability can be configured for redundant Primary (Ref 1) and Secondary (Ref 2) reference genlock signals
12
34
56
7
98
10
Frame Bus 2(Secondary)
Frame Bus 1(Primary)
89GeckoFlex Frame
Mixing Signal Types Is Easy
With flexible rear connector modules, it’s easy to mix video, audio and fiber modules in the same GeckoFlex frame.
FIBER
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900V-R
J11
J1
J12
J2
J3J4
J5J6
J7J8
J9J10
J13 J14
8900A-R 8900WFR-R
J1 J2
J3 J4
J5 J6
J7 J8
J9
VIDEO AUDIO FIBER
Newton System: Fast, Easy, Ethernet-Based Module Control
The Grass Valley Newton modular control system gives you fast, multi-knob, Ethernet-based access to GeckoFlex modules. Using either a
software or hardware interface, it gives you immediate control of up to four parameters at once across multiple modules. Newton operational control
panels work with Ethernet-equipped GeckoFlex frames fitted with an optional 8900NET (Net Card) Network Interface module.
Newton Hardware Control Panel
GeckoFlex Frame
8960DECControl
8960DEC
8921ADTControl
8921ADT
8960DECVideo A to D
8921ADT4 Ch Audio A to D
IRDAnalogVideo
DigitalVideo
4 Ch Analog Audio
AES 1
AES 2
AES 1
AES 2
Concerto SeriesMulti-Format Router
8960DECVideo A to D
8921ADT4 Ch Audio A to D
IRD
4 Ch Analog Audio
8900NETEthernetInterface
Sat 4
Sat 5
Ethernet Facility LAN
Specifications Ordering InformationPower RatingInput voltage: 100-240 V continuous range
Frequency: 50 Hz to 60 Hz
Input current: 1.5 A (with redundant power supply unit)
Inrush current: 20 A at 230 V (cold start)
Power Dissipation (most demanding case)8900FF, 8900FFN: 125W
8900FX: 30W
WeightWeight without modules, one PSU: 8.4 kg (8900FX), 8.8 kg (8900FF/8900FFN)
Weight with eight modules, two PSU, and net card: 11 kg (8900FX), 11.5 kg (8900FF/8900FFN) typical
EnvironmentalOperating temperature: +0° to +40°C
Operating humidity: 10% to 95% non-condensing
External DimensionsHeight (maximum external): 89 mm
Width (maximum external): 447 mm
Depth (maximum external): 390 mm
Mounting DimensionsMounting width: Fits standard 19" rack
Mounting height: Two rack units
Mounting depth: 373 mm plus space for cabling
When ordering, users must ensure that the cooling available is suitable for the power load of the modules within the frame.
Frames
8900FX – Basic GeckoFlex Distribution FrameGeckoFlex frame with single power supply, 10 blank rears, and passive cooling suitable for power loads up to 30W
8900FFN – High-Power GeckoFlex Frame for any Module MixGeckoFlex frame with single power supply, 10 blank rears, cooling fans, and 8900NET (Net Card) Network Interface module suitable for any combination of modules up to 125W
8900FF – Fan-Cooled GeckoFlex Frame for Distribution, Audio, and SD VideoGeckoFlex frame with single power supply, 10 blank rears, and fans suitable for distribution and Gecko (8900) modules up to 125W
Recommended Options8900U-PSX: Redundant power supply for 8900FX, 8900FF, or 8900FFN
8900-FRMKIT: Rear rack support
Rears for Fitting 8900 Gecko Modules8900V-R: GeckoFlex 2 RU video rear, one slot, 10 BNC I/O for Gecko (8900) video and unbalanced audio legacy modules
8900A-R: GeckoFlex 2 RU video rear, one slot, four BNC I/O 10 3-pin balanced audio I/O for Gecko (8900) audio legacy modules
Upgrades
8900NETNetwork interface module
8900F-FANFan front cover upgrade for GeckoFlex frame
DocumentationFor the instruction manual and other documentation related to the GeckoFlex system please refer to www.grassvalley.com/docs/modular
8900NET Network Interface Module (Net Card)
90
ApplicationsNetwork-based control of GeckoFlex modules•
Key FeaturesEasy upgrade from card-edge local control to Ethernet network-•based configuration, control, and monitoring
Choice of user interfaces—Web-browser, Newton control panels, or •third-party solutions
Uses industry standard protocols including SNMP, HTTP, and TCP/IP•
Compatible with all Gecko and GeckoFlex frames•
Installs in separate card slot—leaves all 10 frame cells available •for processing modules
8900NETNetwork Interface module
For detailed specifications, installation, and setup instructions see:www.grassvalley.com/docs/modular
The 8900NET (Net Card) Network Interface module is much more than a simple Ethernet adapter—it’s a complete Web server on a single module. The Web server embedded in the chipset creates Web pages for the frame and each module within it and distributes them over a standard Ethernet TCP/IP network.
For basic Web control of GeckoFlex modules, there is no need for you to purchase additional software or hardware—simply use a standard Web browser to view and control module and frame parameters. You can also use the 8900NET module in conjunction with the Newton modular control system.
Ordering Information
8900NET Network Interface Module (Net Card)
Our customer support and services offerings ensure optimal system performance and maximize uptime. These services include call centers staffed around the clock, commissioning, professional training courses, and technical maintenance programs and service agreements.
www.grassvalley.com/support
Grass Valley’s International Contact Centers are available night and day providing answers to your questions. We will put you through to a qualified service engineer when technical answers are needed.
For the Americas: Call: +1 800-547-8949, press 2 (toll-free), or +1 530-478-4148 E-mail: [email protected]
For EMEA and APAC: Call: +800 80 80 20 20 (toll-free) or +33 1 48 25 20 20 E-mail: [email protected]
CUSTOMER SUPPORT & SERVICES
INTERNATIONAL CONTACT CENTERS – AVAILABLE 24 HOURS A DAY, 7 DAYS A WEEK
SALES
Local and regional sales contacts can be found by visiting
www.grassvalley.com/sales
SUPPORT
Local and regional support contacts can be found by visiting
www.grassvalley.com/support
© Copyright 2010 Technicolor USA, Inc. dba Grass Valley. All rights reserved. Grass Valley, Encore, Gecko, GeckoFlex, Kameleon, NetCentral, NetConfig, and Newton are trademarks of Technicolor USA, Inc. All other tradenames referenced are service marks, trademarks, or registered trademarks of their respective companies. Specifications subject to change without notice. MOD-4017M-5