ministry of oil1-the requisition to be sold in (250, ˘ˇ ˆ account number (90956)in rafidan bank...

35
MINISTRY OF OIL MIDLAND REFINERIES CO. (G.CO.) (DAURA REFINERY) ADVERTISMENT MIDLAND REFINERIES CO. ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW:- REQ.NO. DESCRIPTION QTY ESTIMATED COST ADVERTISMENT NO. BID BOND 1207/2018 SUPPLEMENTARY INST & METERS 5 ITEMS 49200 $ THIRD 1450 $ 1-The requisition to be sold in (250, 000) Iraqi dinars; un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time, the representatives of the companies can be attend to our company (MRC) at 10 o’clock morning one day after the closing day stated below in item (29) . 3-Offered prices should be (CIP) Baghdad / Daura Refinery WAREHOUSE and preferred to be in us dollar. they will be final and nonnegotiable . (MRC) is not obliged to accept the lowest prices. 4- offeres (TECHNICAL & COMMERCIAL) to be submitted, separately in sealed envelopes, either directly at (MRC) reception bureau or sent by (DHL). the requisition number, the description and the closing date should be fixed on both envelopes. the validity of the offer should be mentioned within the technical offer ; also on the envelope of the commercial offer. offers sent by e– mail will be neglected. 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days. 6- All pages of, both, the technical and commercial offers should be numbered in sequence, including the attachments and documents. 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved, issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition. 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE , CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY), ISSUED FROM : (( HUDA BANK , TRADE BANK OF IRAQ , KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT , ERBIL BANK , CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE , NATIONAL ISLAMIC BANK , MANSOUR BANK FOR INVESTMENT , REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE), BANK OF BAGHDAD , GULF COMMERCIAL BANK, SUMER COMMERCIAL BANK , CREDIT BANK OF IRAQ , NATIONAL BANK OF IRAQ , INVESTMENT BANK OF IRAQ , ASHUR INTERNATIONAL BANK FOR INVESTMENT , IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT , INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE , COMMERCIAL BANK OF IRAQ , BYBLOS BANK , IRAQ IMDLEST BANK OF INVESTMENT , BANK MED , UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED. OFFERS WITHOUT BID BOND WILL BE NEGLECTED . BID BOND ISSUED FROM ((ASIA BANK , DAR ESSALAAM INVESTMENT BANK , NORTH BANK FOR FINANCIAL AND INVESTMENT , DIJLAH AND FURAT BANK , WARKA BANK FOR INVESTMENT & FINANCE , THE BANK OF BASRAH INTERNATIONAL , AL- RAWAHIL ISLAMIC BANK ,,ECONOMY FOR INVESTMENT AND FINANCE , ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE , UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE . THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED 9- the delivery period (in days) should be, exactly specified. 10- Basic terms of payment is by irrevocable & unconfirmed letter of credit to be paid (100%) after the receipt of goods in baghdad complete and as ordered. other terms of payment may be, mutually, agreed upon later and for certain conditions, which are : a portion of the total amount to be paid, but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq .at the date of opening the offers .for the purpose of preferability and by iraqi dinar only , for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contract,and the cost was stated in the contract. 11- Delay penalty to be applied with total amount, not exceeding (10%) of the total value of the contract . 12- An unconditional performance bond of (5%) of the total value of the contract to be submitted, from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction , from one of the banks mentioned in item (8) within (14) fourteen days from the date, the supplier is informed of the award. for any delay beyond the specified period, the award will be cancelled and the supplier will be considered as a shirker. the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated), is over. this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise, it will be confiscated by our company.

Upload: others

Post on 21-Sep-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12072018 SUPPLEMENTARY INST amp METERS 5 ITEMS 49200 $ THIRD 1450 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12072018

QTY UNITIT

1shy NOS15

-2 10 I NOS

-

-

I

VOCABNO

37080110023

3766010500

I

I

DESCRIPTION SUPPLEMENTARY IN ST amp METERS LOCATION ISOMERTION UNIT SPARE PART FOR DLC 3010 TRANSDUCER BOARD ASSEMBLY FOR DLC 3010 PART NO GE14863X012 REVISION C

DEW POINT TRANS MITTER

EASIDEW IS DEW POINT TRANSMITTER MAKER MICHELL INSTRUMENTS Measurement range -100 to +20degC DEW POINT (-148 TO +68degF DEW POINT) OUTPUT SIGNAL 4-20 rnA (2-WRITE CONNECTION CURRENT SOURCE) OUTPUT DEW POINT OR MOISTURE

CONTENT FOR ppmv ANALOG OUTPUT SCALED RANGE DEW POINT -100 TO 20degC (-148 TO +68degF MOISTURE CONTENT IN GAS 0 - 3000ppmv SUPPLY VOLTAGE 12 TO 28 VDC OPERATING TEMPERATURE -40 TO +70degC (-40 TO +158degF) OPERATING PRESSURE 45MPa (450barg6500 psig) MAXIMUM FLOW RATE 1 TO 5 NIIMIN (21 TO 106 scfb) HAZARDOUS A~EA CERTIFICATES ATEX II 1 G Ex ia IIC T4 Ga (-20 TO +70degC) HOUSING MATERIAL 316 STAINLESS STEEL

FILTER (SENSOR PROTECTION) STANDARD HDPE GUARD lt10J1m OPTIONAL 316 STAINLESS STEEL SENTERED GUARDlt80J1m Process connection and material 58 - 18 UNF ALTERNATIVES G1I2 BSP OR 34 -16 UNF 316 stainless steel

I

1 - 2

QTY UNIT VOCABNO DESCRIPTION ATMOSPHERIC DIST UNIT (70000 BBLID) TYPE CONTROL VALVE + TRANSMITTER

3 10 NOS 3780092383 I SENSOR FOR GAS DETECTION SYSTEM SENSEPOINT COMBUSTIBLE GAS SENSOR WITH FllTER O~100 lEL-PN2106B1200(M20) MANUFACTURE ZEll WEGER ANALYTIC TYPE TRANSMITTER CATALYTIC

I BRIDGE 4 9 NOS 3786015153 Transmitter catalytic bridge

power supply 24VDC Signal 4-20 MA Order no 2106 B 1-110 Manufacturer zell weger ana~tic TYPETRANSNUTTER

so 10 NOS 3786015203 Electronics (2-board) set I

Analog Ihart output For rosemount mod8800C vortex Part no c 08800-5120-3001

Manufacturer rosemount I

ORIGIN Europe union - Japan Usa- Australia - Canada - South Korea shy

Certificate of origin Third party inspection certificate ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5DNV

DELIVERyen PERIOD 90 DAYS Packaging method cartoon ~ox Warranty 12 monthes from dilivery

I

I2-2 1 I

f

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12672018 BOLTS amp NUT 104 ITEMS 7619443 $ TWICE 2200 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12672018

IT QTY UNIT VOCAB NO DESCRIPTION BOlTSampNUTS RIVETS ETC

BSFthreaded boltsampnuts of bright mild steel according I to BSI0S3-1951 with full hexagonal head

NOMINAL DIA LENGTH

1 75 NOS I 1010100160 I 316 x 112 2 150 NOS 01S0 II 316 x 1

3 150 NOS 0200 316 x 1112

4 100 NOS 0220 316 x 2 5 75 NOS 0390 114 x 2 I

6 100 NOS 1320 112 x 2

7 200 NOS 1920 5S x 1112 8 75 NOS 2000 5S x 3112

BSW threaded boltsampnuts of bright mild steel according to BSI0S3-1951 with full hexagonal head MSbright N()MINAl DIA lENGTH

9 500 NOS 1010210180 316 x 1 10 1500 NOS 0340 114 x 34 11 3000 I NOS 0590 516 x 1 12 150

I

NOS 1290 112 1114I x 13 100 NOS 1440 112 x 5 14 75 NOS 14S0 112 x 6 15 150 NOS 2060 5S x 5

16 60 NOS 2S40 34 x 6

17 15 NOS 3570 1 x 2

18 50 NOS 3730 1 x 6

(JBOLT)hook boltampnut MSgalvsqunut with I worth thread to BS1949-1951

NOMINAL DIA lENGTH

19 400 NOS 1010320790 516 x 6

UNCthread boltsampnut of IS-S stainless steel NOMINAL DIA lENGTH

I

20 30 NOS 10106426S0 34 x 2

1- 7

IT QTY- UNIT VOGAB NO DESCRIPTION IANCHORING BOLTS(ROUND BOLTS

LOOSEampPROJECTING TYPE) STUD TYPE EXPANSION BOLTS

NOMINAL DIA LENGTH

21 280 NOS 1010820400 114 X 2114 ~~

22 280 NOS 1010820710 516 I X 4type D-5 23 150 NOS 1010820900 38 II X 3~ty~e E- 19 24 100 NOS 1010821380 12 X type G-18

3 112

I Roofing type boltampnuts LE galvanized bolt with slotted round head amp square Duts threaded BSW to BS 1494-1951 NOMINAL DIA LENGTH

25 200 NOS 1010840860 38 X I 2 Boltsampnuts black mild steel hexagonal head one end and screwed another end furnished with one hexagonal nut metric standard thread

I NOMINAL DIA LENGTH 26 800 NOS I 1011043352 12mm X 20mm

27 500 NOS

I

1011043602 12mm X 220mm boltampnut

I

III

BSFthreaded nuts BSFbright mild steel nuts hexagonal according to JS 1083-1951

SIZE

28 400 NOS 1020220050 516 NF threaded bright mild steel nuts hex

SIZE 29 150 NOS 1020520060 38 30 100 NOS 0070 716 31

I 75 NOS 0100 58 UNCTHREAD NUTS STAINLESS STEEL HEX

SIZE DIA 32 100 NOS 1020600060 38UNC stainless steel hex full nuts

rcf S39 33 300 NOS 1020600080 112 UNC SS hex full nuts

UNCTHREADED NUTS HEXAGONAL GRADE 2HACCORDING TO BS1750-1951 PT2THREADED FIT 2B

I

USE WITH B7 STUDOR TO ASTM A194 SIZE

34 250 NOS 102062024 0 1 112 I

UNC grade 4-nuts hexagonal according to BS1750-1951 PT2- threaded fit 2Bmaterial to BS1506-240 tube use with L7 stud

SIZE 35 90 NOS 1020640210 1

2-7

IT aTY UNIT VOCAB NO DESCRIPTION Black metricstandard hexagonal nutsmaterial high tensile steel (NOMINAL DIAMM)

I SIZE 36 1250 NOS 1021100080 m6

Cheese head(or round head)brass screw BAthreaded according to BS75-1951

I SIZE I DIA LENGTH 37 I 100 NOS 1035200320 1 I 4BAishy

- Cheese head(or round head)brass screw BAthreaded according to BS57 -1951 NOMINAL DIA LENGTH

38 175 NOS 10352110340 1112 4BA SCREWS BS WMSTEELHEXHEAD Hexagen head mildsteel BSWthreaded screws in accordance with BS 10831951

II NOMINAL DIA I LENGTH

39 I 250 NOS 1035240390 1114 I X 2

40 100 NOS 1035242680 34 X 2 Countersunk head mild steel BSFthreaded screws according to BS450-1952 NOMINAL DIA LENGTH

41 150 (Each box 1035260370 114 X 1 112 IONos) Nos

42 15 Each box 1035260610 516 X 1 112 IONos)

Nos

I Cheese(or round)head mild steel BSWthreaded screws in accordance with BS 450-1932 NOMINAL DlA LENGTH

43 100 NOS 1035270200 316 X 11 112

44 400 NOS 10220 316 X II 2

45 250 NOS 10370 114 X 1 112

46 200 NOS 0390 114

X 2 I

47 40 NOS I 0840 38 X 1 112 Countersunk head mild steel BSWthreaded screw in according to BS450-1952 NOMINAL DIA LENGTH

48 400 NOS 1035280330 114 X 112

I

I

NFthreaded screws HH bright mild steel according to ASAnoBI8 2-1935 table 5 thread to ASAnoB 1-1935 NOMINAL DIA I LENGTH

49 20 NOS 1035291040 716 X 34

50 150 NOS 1035291280 112 X 1 51 75 NOS 1035291940 58 X 2

3-7

IT aTY I UNIT VOCAB NO DESCRIPTION NC threaded screws of bright mild steel hexagon head according toASA noBl8 - 2-1935 table 5ampthreaded to ASAnoII-1935 NOMINAL DIA LENGTH

52 400 NOS 1035300350 114 X 1 53 150 NOS 0590 516 X 1 54 125 NOS 0630 516 I X 2 55 100 NOS 1280 112 I X 1

~

56 100 NOS 1400 112 X 4 57 100 NOS 1480 112 X 6

Hexagon head mild steel BSFthreaded screw according to BS1083-1951 NOMINAL DIA LENGTH

58 100 NOS 10353110390 114 X 2 59 50 NOS 0570 516 X 112 60 100 NOS 0630 516 X 2 61 60 NOS 1280 112 X 1 62 50 NOS 1320 112 X 2 63 30 NOS 1360 112 X 3

I Screw according to BS2470-1954 threaded UNCmaterial to be high tensile allenkey or similar quality NOMINAL DIA LENGTH

64 40 I NOS 1035400410 114 X 2112 65 150 NOS 0570 516 X 112 66 150 I

NOS 0610 516 X 1 112 67 200 NOS 0630 516 X 2 68 300 NOS 0820 38 X 1

69 150 NOS 0840 38 X 1 112

70 100 NOS 0880 38 X 2 112

71 10 NOS 3090 I 78 X 1

72 14 NOS 3550 I 1 X 1 112 UNC HEX SOCKET HEXAGON SOCKET SET SCREWS ACCORDING TO BS2470-1954 THREADED UNCMATERIAL TO BE HIGH TENSILE

I ALLENKEY OR SIMILAR QUALITY NOMINAL DIA LENGTH

73 75 NOS 10354111940 58 X 2

I 74 15 NOS 10354113130 I 78 I X 2 I

75 15 NOS 3570 1 I

X 2

[I

4-7

shy

~

IT QTY UNIT VOCAB NO DESCRIPTION SCREWS IN METRIC SYSTEM HEXAGONAL SOCKET SET SCREWS

SIZE LENGTH 76 500 NOS

I 1036252342 8m I

16mm

77 500 NOS 2860 10m 25mm

78 500 NOS 2880 lOx 35mm

i VNetbreaded stud of carbon steel to BS1750-1951 PT3 j material to BS 1506-101

NOMINAL DIA LENGTH

79 100 NOS 10401111960 58 X 2 112

Stud L7 threaded bar stock in accordance ASTMA 320-55T for low temp service in random lengths of6-10-Ft

DIAMETER 80 200 Ft 1040140090 58

UNCALLOY STEEL B7 STUD BOLTS THREADED FULL LENGTH(UNC)WITH TWO NUTSSTUD IN ACCORDANCE WITH BS1750shy

I 1951PTl ASTM A-193 GRADE B-7 AND STAMPED ON ONE END WITH B-7 NUTS IN ACCORDANCE WITH B-7 1750-1951PT2 GREAD 2HampSTAMP WITH SYMBOL 2H THREAD FITS2A AND 2B

I NOMINAL DIA LENGTH I I

81 2000 NOS 1040171020 38 X 6studamp2nuts

82 2000 NOS 2210 58 X 14Studamp2nuts

83 2000 NOS 2230 58 I

X 16 Studamp2nuts

84 8000 NOS 2780 34 X 4112 85 2000 NOS 2840 34 X 6 86 2000 NOS

I 3050 34 X 12Stud bolt B7

With two nuts 87 2000 NOS

I 3880 1 X 12Studamp2nuts 88 400 NOS 7500 16mm X

I

220mm stud bolt With two nuts

B-7 ALLOY STEEL I STUD BOLTS ALLOY STEEL FULL THREADED BAR UNC TEMPERED AT ItOOF TO ASTMA-193 GRADE B-7

I IN RANDOM LENGTH OF 6-10FT SIZE

89 500 FT 1040180080 112 90 500 FT 1040180140 78 91 1000 FT 0160 1Stud bar

VNC B7 92 15 FT 1040180220 1 38

5-7

IT QTY UNIT VOCAB NO DESCRIPTION Stud b14-threaded bar stock in accordance with BS1750shy1951PT1threaded IT 2Amaterial to BS1506-661 in random lengths of6-10 FT

DIAMETER

93 25 FT 1

1040190120 78

94 40 FT 1040190130 1

1

95 25 FT 1040190140 1 118

96 40 I

FT 1040190150 1 114

Bright mild steel washers flat heavy pattern for whitworth thread to BS1083-1951 SIZE LENGTH

97 1500 NOS 1045142040 114 100

98 150 NOS 1045142180 1 118 100 Galvanized mild steel flatwashers to BS 1494-951 Galvanized diamond shaped washers

I

SIZE LENGTH

99 750 NOS 1045150550 516 100 ID

I Spring washers single coil black square section in accordance with BS1802-1951 table 3type A

1 SIZE LENGTH

100 200 NOS I

1045300030 316 100 101 750 NOS I 0080 112 100 102 500 NOS 0100 58 100

(single coil square type A) metric single coil square section steel sparing washer

NOMINAL

103 2000 NOS 1046300082 m6

104 2000 NOS 0102 m10

6-7

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 2: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12072018

QTY UNITIT

1shy NOS15

-2 10 I NOS

-

-

I

VOCABNO

37080110023

3766010500

I

I

DESCRIPTION SUPPLEMENTARY IN ST amp METERS LOCATION ISOMERTION UNIT SPARE PART FOR DLC 3010 TRANSDUCER BOARD ASSEMBLY FOR DLC 3010 PART NO GE14863X012 REVISION C

DEW POINT TRANS MITTER

EASIDEW IS DEW POINT TRANSMITTER MAKER MICHELL INSTRUMENTS Measurement range -100 to +20degC DEW POINT (-148 TO +68degF DEW POINT) OUTPUT SIGNAL 4-20 rnA (2-WRITE CONNECTION CURRENT SOURCE) OUTPUT DEW POINT OR MOISTURE

CONTENT FOR ppmv ANALOG OUTPUT SCALED RANGE DEW POINT -100 TO 20degC (-148 TO +68degF MOISTURE CONTENT IN GAS 0 - 3000ppmv SUPPLY VOLTAGE 12 TO 28 VDC OPERATING TEMPERATURE -40 TO +70degC (-40 TO +158degF) OPERATING PRESSURE 45MPa (450barg6500 psig) MAXIMUM FLOW RATE 1 TO 5 NIIMIN (21 TO 106 scfb) HAZARDOUS A~EA CERTIFICATES ATEX II 1 G Ex ia IIC T4 Ga (-20 TO +70degC) HOUSING MATERIAL 316 STAINLESS STEEL

FILTER (SENSOR PROTECTION) STANDARD HDPE GUARD lt10J1m OPTIONAL 316 STAINLESS STEEL SENTERED GUARDlt80J1m Process connection and material 58 - 18 UNF ALTERNATIVES G1I2 BSP OR 34 -16 UNF 316 stainless steel

I

1 - 2

QTY UNIT VOCABNO DESCRIPTION ATMOSPHERIC DIST UNIT (70000 BBLID) TYPE CONTROL VALVE + TRANSMITTER

3 10 NOS 3780092383 I SENSOR FOR GAS DETECTION SYSTEM SENSEPOINT COMBUSTIBLE GAS SENSOR WITH FllTER O~100 lEL-PN2106B1200(M20) MANUFACTURE ZEll WEGER ANALYTIC TYPE TRANSMITTER CATALYTIC

I BRIDGE 4 9 NOS 3786015153 Transmitter catalytic bridge

power supply 24VDC Signal 4-20 MA Order no 2106 B 1-110 Manufacturer zell weger ana~tic TYPETRANSNUTTER

so 10 NOS 3786015203 Electronics (2-board) set I

Analog Ihart output For rosemount mod8800C vortex Part no c 08800-5120-3001

Manufacturer rosemount I

ORIGIN Europe union - Japan Usa- Australia - Canada - South Korea shy

Certificate of origin Third party inspection certificate ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5DNV

DELIVERyen PERIOD 90 DAYS Packaging method cartoon ~ox Warranty 12 monthes from dilivery

I

I2-2 1 I

f

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12672018 BOLTS amp NUT 104 ITEMS 7619443 $ TWICE 2200 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12672018

IT QTY UNIT VOCAB NO DESCRIPTION BOlTSampNUTS RIVETS ETC

BSFthreaded boltsampnuts of bright mild steel according I to BSI0S3-1951 with full hexagonal head

NOMINAL DIA LENGTH

1 75 NOS I 1010100160 I 316 x 112 2 150 NOS 01S0 II 316 x 1

3 150 NOS 0200 316 x 1112

4 100 NOS 0220 316 x 2 5 75 NOS 0390 114 x 2 I

6 100 NOS 1320 112 x 2

7 200 NOS 1920 5S x 1112 8 75 NOS 2000 5S x 3112

BSW threaded boltsampnuts of bright mild steel according to BSI0S3-1951 with full hexagonal head MSbright N()MINAl DIA lENGTH

9 500 NOS 1010210180 316 x 1 10 1500 NOS 0340 114 x 34 11 3000 I NOS 0590 516 x 1 12 150

I

NOS 1290 112 1114I x 13 100 NOS 1440 112 x 5 14 75 NOS 14S0 112 x 6 15 150 NOS 2060 5S x 5

16 60 NOS 2S40 34 x 6

17 15 NOS 3570 1 x 2

18 50 NOS 3730 1 x 6

(JBOLT)hook boltampnut MSgalvsqunut with I worth thread to BS1949-1951

NOMINAL DIA lENGTH

19 400 NOS 1010320790 516 x 6

UNCthread boltsampnut of IS-S stainless steel NOMINAL DIA lENGTH

I

20 30 NOS 10106426S0 34 x 2

1- 7

IT QTY- UNIT VOGAB NO DESCRIPTION IANCHORING BOLTS(ROUND BOLTS

LOOSEampPROJECTING TYPE) STUD TYPE EXPANSION BOLTS

NOMINAL DIA LENGTH

21 280 NOS 1010820400 114 X 2114 ~~

22 280 NOS 1010820710 516 I X 4type D-5 23 150 NOS 1010820900 38 II X 3~ty~e E- 19 24 100 NOS 1010821380 12 X type G-18

3 112

I Roofing type boltampnuts LE galvanized bolt with slotted round head amp square Duts threaded BSW to BS 1494-1951 NOMINAL DIA LENGTH

25 200 NOS 1010840860 38 X I 2 Boltsampnuts black mild steel hexagonal head one end and screwed another end furnished with one hexagonal nut metric standard thread

I NOMINAL DIA LENGTH 26 800 NOS I 1011043352 12mm X 20mm

27 500 NOS

I

1011043602 12mm X 220mm boltampnut

I

III

BSFthreaded nuts BSFbright mild steel nuts hexagonal according to JS 1083-1951

SIZE

28 400 NOS 1020220050 516 NF threaded bright mild steel nuts hex

SIZE 29 150 NOS 1020520060 38 30 100 NOS 0070 716 31

I 75 NOS 0100 58 UNCTHREAD NUTS STAINLESS STEEL HEX

SIZE DIA 32 100 NOS 1020600060 38UNC stainless steel hex full nuts

rcf S39 33 300 NOS 1020600080 112 UNC SS hex full nuts

UNCTHREADED NUTS HEXAGONAL GRADE 2HACCORDING TO BS1750-1951 PT2THREADED FIT 2B

I

USE WITH B7 STUDOR TO ASTM A194 SIZE

34 250 NOS 102062024 0 1 112 I

UNC grade 4-nuts hexagonal according to BS1750-1951 PT2- threaded fit 2Bmaterial to BS1506-240 tube use with L7 stud

SIZE 35 90 NOS 1020640210 1

2-7

IT aTY UNIT VOCAB NO DESCRIPTION Black metricstandard hexagonal nutsmaterial high tensile steel (NOMINAL DIAMM)

I SIZE 36 1250 NOS 1021100080 m6

Cheese head(or round head)brass screw BAthreaded according to BS75-1951

I SIZE I DIA LENGTH 37 I 100 NOS 1035200320 1 I 4BAishy

- Cheese head(or round head)brass screw BAthreaded according to BS57 -1951 NOMINAL DIA LENGTH

38 175 NOS 10352110340 1112 4BA SCREWS BS WMSTEELHEXHEAD Hexagen head mildsteel BSWthreaded screws in accordance with BS 10831951

II NOMINAL DIA I LENGTH

39 I 250 NOS 1035240390 1114 I X 2

40 100 NOS 1035242680 34 X 2 Countersunk head mild steel BSFthreaded screws according to BS450-1952 NOMINAL DIA LENGTH

41 150 (Each box 1035260370 114 X 1 112 IONos) Nos

42 15 Each box 1035260610 516 X 1 112 IONos)

Nos

I Cheese(or round)head mild steel BSWthreaded screws in accordance with BS 450-1932 NOMINAL DlA LENGTH

43 100 NOS 1035270200 316 X 11 112

44 400 NOS 10220 316 X II 2

45 250 NOS 10370 114 X 1 112

46 200 NOS 0390 114

X 2 I

47 40 NOS I 0840 38 X 1 112 Countersunk head mild steel BSWthreaded screw in according to BS450-1952 NOMINAL DIA LENGTH

48 400 NOS 1035280330 114 X 112

I

I

NFthreaded screws HH bright mild steel according to ASAnoBI8 2-1935 table 5 thread to ASAnoB 1-1935 NOMINAL DIA I LENGTH

49 20 NOS 1035291040 716 X 34

50 150 NOS 1035291280 112 X 1 51 75 NOS 1035291940 58 X 2

3-7

IT aTY I UNIT VOCAB NO DESCRIPTION NC threaded screws of bright mild steel hexagon head according toASA noBl8 - 2-1935 table 5ampthreaded to ASAnoII-1935 NOMINAL DIA LENGTH

52 400 NOS 1035300350 114 X 1 53 150 NOS 0590 516 X 1 54 125 NOS 0630 516 I X 2 55 100 NOS 1280 112 I X 1

~

56 100 NOS 1400 112 X 4 57 100 NOS 1480 112 X 6

Hexagon head mild steel BSFthreaded screw according to BS1083-1951 NOMINAL DIA LENGTH

58 100 NOS 10353110390 114 X 2 59 50 NOS 0570 516 X 112 60 100 NOS 0630 516 X 2 61 60 NOS 1280 112 X 1 62 50 NOS 1320 112 X 2 63 30 NOS 1360 112 X 3

I Screw according to BS2470-1954 threaded UNCmaterial to be high tensile allenkey or similar quality NOMINAL DIA LENGTH

64 40 I NOS 1035400410 114 X 2112 65 150 NOS 0570 516 X 112 66 150 I

NOS 0610 516 X 1 112 67 200 NOS 0630 516 X 2 68 300 NOS 0820 38 X 1

69 150 NOS 0840 38 X 1 112

70 100 NOS 0880 38 X 2 112

71 10 NOS 3090 I 78 X 1

72 14 NOS 3550 I 1 X 1 112 UNC HEX SOCKET HEXAGON SOCKET SET SCREWS ACCORDING TO BS2470-1954 THREADED UNCMATERIAL TO BE HIGH TENSILE

I ALLENKEY OR SIMILAR QUALITY NOMINAL DIA LENGTH

73 75 NOS 10354111940 58 X 2

I 74 15 NOS 10354113130 I 78 I X 2 I

75 15 NOS 3570 1 I

X 2

[I

4-7

shy

~

IT QTY UNIT VOCAB NO DESCRIPTION SCREWS IN METRIC SYSTEM HEXAGONAL SOCKET SET SCREWS

SIZE LENGTH 76 500 NOS

I 1036252342 8m I

16mm

77 500 NOS 2860 10m 25mm

78 500 NOS 2880 lOx 35mm

i VNetbreaded stud of carbon steel to BS1750-1951 PT3 j material to BS 1506-101

NOMINAL DIA LENGTH

79 100 NOS 10401111960 58 X 2 112

Stud L7 threaded bar stock in accordance ASTMA 320-55T for low temp service in random lengths of6-10-Ft

DIAMETER 80 200 Ft 1040140090 58

UNCALLOY STEEL B7 STUD BOLTS THREADED FULL LENGTH(UNC)WITH TWO NUTSSTUD IN ACCORDANCE WITH BS1750shy

I 1951PTl ASTM A-193 GRADE B-7 AND STAMPED ON ONE END WITH B-7 NUTS IN ACCORDANCE WITH B-7 1750-1951PT2 GREAD 2HampSTAMP WITH SYMBOL 2H THREAD FITS2A AND 2B

I NOMINAL DIA LENGTH I I

81 2000 NOS 1040171020 38 X 6studamp2nuts

82 2000 NOS 2210 58 X 14Studamp2nuts

83 2000 NOS 2230 58 I

X 16 Studamp2nuts

84 8000 NOS 2780 34 X 4112 85 2000 NOS 2840 34 X 6 86 2000 NOS

I 3050 34 X 12Stud bolt B7

With two nuts 87 2000 NOS

I 3880 1 X 12Studamp2nuts 88 400 NOS 7500 16mm X

I

220mm stud bolt With two nuts

B-7 ALLOY STEEL I STUD BOLTS ALLOY STEEL FULL THREADED BAR UNC TEMPERED AT ItOOF TO ASTMA-193 GRADE B-7

I IN RANDOM LENGTH OF 6-10FT SIZE

89 500 FT 1040180080 112 90 500 FT 1040180140 78 91 1000 FT 0160 1Stud bar

VNC B7 92 15 FT 1040180220 1 38

5-7

IT QTY UNIT VOCAB NO DESCRIPTION Stud b14-threaded bar stock in accordance with BS1750shy1951PT1threaded IT 2Amaterial to BS1506-661 in random lengths of6-10 FT

DIAMETER

93 25 FT 1

1040190120 78

94 40 FT 1040190130 1

1

95 25 FT 1040190140 1 118

96 40 I

FT 1040190150 1 114

Bright mild steel washers flat heavy pattern for whitworth thread to BS1083-1951 SIZE LENGTH

97 1500 NOS 1045142040 114 100

98 150 NOS 1045142180 1 118 100 Galvanized mild steel flatwashers to BS 1494-951 Galvanized diamond shaped washers

I

SIZE LENGTH

99 750 NOS 1045150550 516 100 ID

I Spring washers single coil black square section in accordance with BS1802-1951 table 3type A

1 SIZE LENGTH

100 200 NOS I

1045300030 316 100 101 750 NOS I 0080 112 100 102 500 NOS 0100 58 100

(single coil square type A) metric single coil square section steel sparing washer

NOMINAL

103 2000 NOS 1046300082 m6

104 2000 NOS 0102 m10

6-7

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 3: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

REQNO 12072018

QTY UNITIT

1shy NOS15

-2 10 I NOS

-

-

I

VOCABNO

37080110023

3766010500

I

I

DESCRIPTION SUPPLEMENTARY IN ST amp METERS LOCATION ISOMERTION UNIT SPARE PART FOR DLC 3010 TRANSDUCER BOARD ASSEMBLY FOR DLC 3010 PART NO GE14863X012 REVISION C

DEW POINT TRANS MITTER

EASIDEW IS DEW POINT TRANSMITTER MAKER MICHELL INSTRUMENTS Measurement range -100 to +20degC DEW POINT (-148 TO +68degF DEW POINT) OUTPUT SIGNAL 4-20 rnA (2-WRITE CONNECTION CURRENT SOURCE) OUTPUT DEW POINT OR MOISTURE

CONTENT FOR ppmv ANALOG OUTPUT SCALED RANGE DEW POINT -100 TO 20degC (-148 TO +68degF MOISTURE CONTENT IN GAS 0 - 3000ppmv SUPPLY VOLTAGE 12 TO 28 VDC OPERATING TEMPERATURE -40 TO +70degC (-40 TO +158degF) OPERATING PRESSURE 45MPa (450barg6500 psig) MAXIMUM FLOW RATE 1 TO 5 NIIMIN (21 TO 106 scfb) HAZARDOUS A~EA CERTIFICATES ATEX II 1 G Ex ia IIC T4 Ga (-20 TO +70degC) HOUSING MATERIAL 316 STAINLESS STEEL

FILTER (SENSOR PROTECTION) STANDARD HDPE GUARD lt10J1m OPTIONAL 316 STAINLESS STEEL SENTERED GUARDlt80J1m Process connection and material 58 - 18 UNF ALTERNATIVES G1I2 BSP OR 34 -16 UNF 316 stainless steel

I

1 - 2

QTY UNIT VOCABNO DESCRIPTION ATMOSPHERIC DIST UNIT (70000 BBLID) TYPE CONTROL VALVE + TRANSMITTER

3 10 NOS 3780092383 I SENSOR FOR GAS DETECTION SYSTEM SENSEPOINT COMBUSTIBLE GAS SENSOR WITH FllTER O~100 lEL-PN2106B1200(M20) MANUFACTURE ZEll WEGER ANALYTIC TYPE TRANSMITTER CATALYTIC

I BRIDGE 4 9 NOS 3786015153 Transmitter catalytic bridge

power supply 24VDC Signal 4-20 MA Order no 2106 B 1-110 Manufacturer zell weger ana~tic TYPETRANSNUTTER

so 10 NOS 3786015203 Electronics (2-board) set I

Analog Ihart output For rosemount mod8800C vortex Part no c 08800-5120-3001

Manufacturer rosemount I

ORIGIN Europe union - Japan Usa- Australia - Canada - South Korea shy

Certificate of origin Third party inspection certificate ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5DNV

DELIVERyen PERIOD 90 DAYS Packaging method cartoon ~ox Warranty 12 monthes from dilivery

I

I2-2 1 I

f

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12672018 BOLTS amp NUT 104 ITEMS 7619443 $ TWICE 2200 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12672018

IT QTY UNIT VOCAB NO DESCRIPTION BOlTSampNUTS RIVETS ETC

BSFthreaded boltsampnuts of bright mild steel according I to BSI0S3-1951 with full hexagonal head

NOMINAL DIA LENGTH

1 75 NOS I 1010100160 I 316 x 112 2 150 NOS 01S0 II 316 x 1

3 150 NOS 0200 316 x 1112

4 100 NOS 0220 316 x 2 5 75 NOS 0390 114 x 2 I

6 100 NOS 1320 112 x 2

7 200 NOS 1920 5S x 1112 8 75 NOS 2000 5S x 3112

BSW threaded boltsampnuts of bright mild steel according to BSI0S3-1951 with full hexagonal head MSbright N()MINAl DIA lENGTH

9 500 NOS 1010210180 316 x 1 10 1500 NOS 0340 114 x 34 11 3000 I NOS 0590 516 x 1 12 150

I

NOS 1290 112 1114I x 13 100 NOS 1440 112 x 5 14 75 NOS 14S0 112 x 6 15 150 NOS 2060 5S x 5

16 60 NOS 2S40 34 x 6

17 15 NOS 3570 1 x 2

18 50 NOS 3730 1 x 6

(JBOLT)hook boltampnut MSgalvsqunut with I worth thread to BS1949-1951

NOMINAL DIA lENGTH

19 400 NOS 1010320790 516 x 6

UNCthread boltsampnut of IS-S stainless steel NOMINAL DIA lENGTH

I

20 30 NOS 10106426S0 34 x 2

1- 7

IT QTY- UNIT VOGAB NO DESCRIPTION IANCHORING BOLTS(ROUND BOLTS

LOOSEampPROJECTING TYPE) STUD TYPE EXPANSION BOLTS

NOMINAL DIA LENGTH

21 280 NOS 1010820400 114 X 2114 ~~

22 280 NOS 1010820710 516 I X 4type D-5 23 150 NOS 1010820900 38 II X 3~ty~e E- 19 24 100 NOS 1010821380 12 X type G-18

3 112

I Roofing type boltampnuts LE galvanized bolt with slotted round head amp square Duts threaded BSW to BS 1494-1951 NOMINAL DIA LENGTH

25 200 NOS 1010840860 38 X I 2 Boltsampnuts black mild steel hexagonal head one end and screwed another end furnished with one hexagonal nut metric standard thread

I NOMINAL DIA LENGTH 26 800 NOS I 1011043352 12mm X 20mm

27 500 NOS

I

1011043602 12mm X 220mm boltampnut

I

III

BSFthreaded nuts BSFbright mild steel nuts hexagonal according to JS 1083-1951

SIZE

28 400 NOS 1020220050 516 NF threaded bright mild steel nuts hex

SIZE 29 150 NOS 1020520060 38 30 100 NOS 0070 716 31

I 75 NOS 0100 58 UNCTHREAD NUTS STAINLESS STEEL HEX

SIZE DIA 32 100 NOS 1020600060 38UNC stainless steel hex full nuts

rcf S39 33 300 NOS 1020600080 112 UNC SS hex full nuts

UNCTHREADED NUTS HEXAGONAL GRADE 2HACCORDING TO BS1750-1951 PT2THREADED FIT 2B

I

USE WITH B7 STUDOR TO ASTM A194 SIZE

34 250 NOS 102062024 0 1 112 I

UNC grade 4-nuts hexagonal according to BS1750-1951 PT2- threaded fit 2Bmaterial to BS1506-240 tube use with L7 stud

SIZE 35 90 NOS 1020640210 1

2-7

IT aTY UNIT VOCAB NO DESCRIPTION Black metricstandard hexagonal nutsmaterial high tensile steel (NOMINAL DIAMM)

I SIZE 36 1250 NOS 1021100080 m6

Cheese head(or round head)brass screw BAthreaded according to BS75-1951

I SIZE I DIA LENGTH 37 I 100 NOS 1035200320 1 I 4BAishy

- Cheese head(or round head)brass screw BAthreaded according to BS57 -1951 NOMINAL DIA LENGTH

38 175 NOS 10352110340 1112 4BA SCREWS BS WMSTEELHEXHEAD Hexagen head mildsteel BSWthreaded screws in accordance with BS 10831951

II NOMINAL DIA I LENGTH

39 I 250 NOS 1035240390 1114 I X 2

40 100 NOS 1035242680 34 X 2 Countersunk head mild steel BSFthreaded screws according to BS450-1952 NOMINAL DIA LENGTH

41 150 (Each box 1035260370 114 X 1 112 IONos) Nos

42 15 Each box 1035260610 516 X 1 112 IONos)

Nos

I Cheese(or round)head mild steel BSWthreaded screws in accordance with BS 450-1932 NOMINAL DlA LENGTH

43 100 NOS 1035270200 316 X 11 112

44 400 NOS 10220 316 X II 2

45 250 NOS 10370 114 X 1 112

46 200 NOS 0390 114

X 2 I

47 40 NOS I 0840 38 X 1 112 Countersunk head mild steel BSWthreaded screw in according to BS450-1952 NOMINAL DIA LENGTH

48 400 NOS 1035280330 114 X 112

I

I

NFthreaded screws HH bright mild steel according to ASAnoBI8 2-1935 table 5 thread to ASAnoB 1-1935 NOMINAL DIA I LENGTH

49 20 NOS 1035291040 716 X 34

50 150 NOS 1035291280 112 X 1 51 75 NOS 1035291940 58 X 2

3-7

IT aTY I UNIT VOCAB NO DESCRIPTION NC threaded screws of bright mild steel hexagon head according toASA noBl8 - 2-1935 table 5ampthreaded to ASAnoII-1935 NOMINAL DIA LENGTH

52 400 NOS 1035300350 114 X 1 53 150 NOS 0590 516 X 1 54 125 NOS 0630 516 I X 2 55 100 NOS 1280 112 I X 1

~

56 100 NOS 1400 112 X 4 57 100 NOS 1480 112 X 6

Hexagon head mild steel BSFthreaded screw according to BS1083-1951 NOMINAL DIA LENGTH

58 100 NOS 10353110390 114 X 2 59 50 NOS 0570 516 X 112 60 100 NOS 0630 516 X 2 61 60 NOS 1280 112 X 1 62 50 NOS 1320 112 X 2 63 30 NOS 1360 112 X 3

I Screw according to BS2470-1954 threaded UNCmaterial to be high tensile allenkey or similar quality NOMINAL DIA LENGTH

64 40 I NOS 1035400410 114 X 2112 65 150 NOS 0570 516 X 112 66 150 I

NOS 0610 516 X 1 112 67 200 NOS 0630 516 X 2 68 300 NOS 0820 38 X 1

69 150 NOS 0840 38 X 1 112

70 100 NOS 0880 38 X 2 112

71 10 NOS 3090 I 78 X 1

72 14 NOS 3550 I 1 X 1 112 UNC HEX SOCKET HEXAGON SOCKET SET SCREWS ACCORDING TO BS2470-1954 THREADED UNCMATERIAL TO BE HIGH TENSILE

I ALLENKEY OR SIMILAR QUALITY NOMINAL DIA LENGTH

73 75 NOS 10354111940 58 X 2

I 74 15 NOS 10354113130 I 78 I X 2 I

75 15 NOS 3570 1 I

X 2

[I

4-7

shy

~

IT QTY UNIT VOCAB NO DESCRIPTION SCREWS IN METRIC SYSTEM HEXAGONAL SOCKET SET SCREWS

SIZE LENGTH 76 500 NOS

I 1036252342 8m I

16mm

77 500 NOS 2860 10m 25mm

78 500 NOS 2880 lOx 35mm

i VNetbreaded stud of carbon steel to BS1750-1951 PT3 j material to BS 1506-101

NOMINAL DIA LENGTH

79 100 NOS 10401111960 58 X 2 112

Stud L7 threaded bar stock in accordance ASTMA 320-55T for low temp service in random lengths of6-10-Ft

DIAMETER 80 200 Ft 1040140090 58

UNCALLOY STEEL B7 STUD BOLTS THREADED FULL LENGTH(UNC)WITH TWO NUTSSTUD IN ACCORDANCE WITH BS1750shy

I 1951PTl ASTM A-193 GRADE B-7 AND STAMPED ON ONE END WITH B-7 NUTS IN ACCORDANCE WITH B-7 1750-1951PT2 GREAD 2HampSTAMP WITH SYMBOL 2H THREAD FITS2A AND 2B

I NOMINAL DIA LENGTH I I

81 2000 NOS 1040171020 38 X 6studamp2nuts

82 2000 NOS 2210 58 X 14Studamp2nuts

83 2000 NOS 2230 58 I

X 16 Studamp2nuts

84 8000 NOS 2780 34 X 4112 85 2000 NOS 2840 34 X 6 86 2000 NOS

I 3050 34 X 12Stud bolt B7

With two nuts 87 2000 NOS

I 3880 1 X 12Studamp2nuts 88 400 NOS 7500 16mm X

I

220mm stud bolt With two nuts

B-7 ALLOY STEEL I STUD BOLTS ALLOY STEEL FULL THREADED BAR UNC TEMPERED AT ItOOF TO ASTMA-193 GRADE B-7

I IN RANDOM LENGTH OF 6-10FT SIZE

89 500 FT 1040180080 112 90 500 FT 1040180140 78 91 1000 FT 0160 1Stud bar

VNC B7 92 15 FT 1040180220 1 38

5-7

IT QTY UNIT VOCAB NO DESCRIPTION Stud b14-threaded bar stock in accordance with BS1750shy1951PT1threaded IT 2Amaterial to BS1506-661 in random lengths of6-10 FT

DIAMETER

93 25 FT 1

1040190120 78

94 40 FT 1040190130 1

1

95 25 FT 1040190140 1 118

96 40 I

FT 1040190150 1 114

Bright mild steel washers flat heavy pattern for whitworth thread to BS1083-1951 SIZE LENGTH

97 1500 NOS 1045142040 114 100

98 150 NOS 1045142180 1 118 100 Galvanized mild steel flatwashers to BS 1494-951 Galvanized diamond shaped washers

I

SIZE LENGTH

99 750 NOS 1045150550 516 100 ID

I Spring washers single coil black square section in accordance with BS1802-1951 table 3type A

1 SIZE LENGTH

100 200 NOS I

1045300030 316 100 101 750 NOS I 0080 112 100 102 500 NOS 0100 58 100

(single coil square type A) metric single coil square section steel sparing washer

NOMINAL

103 2000 NOS 1046300082 m6

104 2000 NOS 0102 m10

6-7

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 4: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

QTY UNIT VOCABNO DESCRIPTION ATMOSPHERIC DIST UNIT (70000 BBLID) TYPE CONTROL VALVE + TRANSMITTER

3 10 NOS 3780092383 I SENSOR FOR GAS DETECTION SYSTEM SENSEPOINT COMBUSTIBLE GAS SENSOR WITH FllTER O~100 lEL-PN2106B1200(M20) MANUFACTURE ZEll WEGER ANALYTIC TYPE TRANSMITTER CATALYTIC

I BRIDGE 4 9 NOS 3786015153 Transmitter catalytic bridge

power supply 24VDC Signal 4-20 MA Order no 2106 B 1-110 Manufacturer zell weger ana~tic TYPETRANSNUTTER

so 10 NOS 3786015203 Electronics (2-board) set I

Analog Ihart output For rosemount mod8800C vortex Part no c 08800-5120-3001

Manufacturer rosemount I

ORIGIN Europe union - Japan Usa- Australia - Canada - South Korea shy

Certificate of origin Third party inspection certificate ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5DNV

DELIVERyen PERIOD 90 DAYS Packaging method cartoon ~ox Warranty 12 monthes from dilivery

I

I2-2 1 I

f

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12672018 BOLTS amp NUT 104 ITEMS 7619443 $ TWICE 2200 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12672018

IT QTY UNIT VOCAB NO DESCRIPTION BOlTSampNUTS RIVETS ETC

BSFthreaded boltsampnuts of bright mild steel according I to BSI0S3-1951 with full hexagonal head

NOMINAL DIA LENGTH

1 75 NOS I 1010100160 I 316 x 112 2 150 NOS 01S0 II 316 x 1

3 150 NOS 0200 316 x 1112

4 100 NOS 0220 316 x 2 5 75 NOS 0390 114 x 2 I

6 100 NOS 1320 112 x 2

7 200 NOS 1920 5S x 1112 8 75 NOS 2000 5S x 3112

BSW threaded boltsampnuts of bright mild steel according to BSI0S3-1951 with full hexagonal head MSbright N()MINAl DIA lENGTH

9 500 NOS 1010210180 316 x 1 10 1500 NOS 0340 114 x 34 11 3000 I NOS 0590 516 x 1 12 150

I

NOS 1290 112 1114I x 13 100 NOS 1440 112 x 5 14 75 NOS 14S0 112 x 6 15 150 NOS 2060 5S x 5

16 60 NOS 2S40 34 x 6

17 15 NOS 3570 1 x 2

18 50 NOS 3730 1 x 6

(JBOLT)hook boltampnut MSgalvsqunut with I worth thread to BS1949-1951

NOMINAL DIA lENGTH

19 400 NOS 1010320790 516 x 6

UNCthread boltsampnut of IS-S stainless steel NOMINAL DIA lENGTH

I

20 30 NOS 10106426S0 34 x 2

1- 7

IT QTY- UNIT VOGAB NO DESCRIPTION IANCHORING BOLTS(ROUND BOLTS

LOOSEampPROJECTING TYPE) STUD TYPE EXPANSION BOLTS

NOMINAL DIA LENGTH

21 280 NOS 1010820400 114 X 2114 ~~

22 280 NOS 1010820710 516 I X 4type D-5 23 150 NOS 1010820900 38 II X 3~ty~e E- 19 24 100 NOS 1010821380 12 X type G-18

3 112

I Roofing type boltampnuts LE galvanized bolt with slotted round head amp square Duts threaded BSW to BS 1494-1951 NOMINAL DIA LENGTH

25 200 NOS 1010840860 38 X I 2 Boltsampnuts black mild steel hexagonal head one end and screwed another end furnished with one hexagonal nut metric standard thread

I NOMINAL DIA LENGTH 26 800 NOS I 1011043352 12mm X 20mm

27 500 NOS

I

1011043602 12mm X 220mm boltampnut

I

III

BSFthreaded nuts BSFbright mild steel nuts hexagonal according to JS 1083-1951

SIZE

28 400 NOS 1020220050 516 NF threaded bright mild steel nuts hex

SIZE 29 150 NOS 1020520060 38 30 100 NOS 0070 716 31

I 75 NOS 0100 58 UNCTHREAD NUTS STAINLESS STEEL HEX

SIZE DIA 32 100 NOS 1020600060 38UNC stainless steel hex full nuts

rcf S39 33 300 NOS 1020600080 112 UNC SS hex full nuts

UNCTHREADED NUTS HEXAGONAL GRADE 2HACCORDING TO BS1750-1951 PT2THREADED FIT 2B

I

USE WITH B7 STUDOR TO ASTM A194 SIZE

34 250 NOS 102062024 0 1 112 I

UNC grade 4-nuts hexagonal according to BS1750-1951 PT2- threaded fit 2Bmaterial to BS1506-240 tube use with L7 stud

SIZE 35 90 NOS 1020640210 1

2-7

IT aTY UNIT VOCAB NO DESCRIPTION Black metricstandard hexagonal nutsmaterial high tensile steel (NOMINAL DIAMM)

I SIZE 36 1250 NOS 1021100080 m6

Cheese head(or round head)brass screw BAthreaded according to BS75-1951

I SIZE I DIA LENGTH 37 I 100 NOS 1035200320 1 I 4BAishy

- Cheese head(or round head)brass screw BAthreaded according to BS57 -1951 NOMINAL DIA LENGTH

38 175 NOS 10352110340 1112 4BA SCREWS BS WMSTEELHEXHEAD Hexagen head mildsteel BSWthreaded screws in accordance with BS 10831951

II NOMINAL DIA I LENGTH

39 I 250 NOS 1035240390 1114 I X 2

40 100 NOS 1035242680 34 X 2 Countersunk head mild steel BSFthreaded screws according to BS450-1952 NOMINAL DIA LENGTH

41 150 (Each box 1035260370 114 X 1 112 IONos) Nos

42 15 Each box 1035260610 516 X 1 112 IONos)

Nos

I Cheese(or round)head mild steel BSWthreaded screws in accordance with BS 450-1932 NOMINAL DlA LENGTH

43 100 NOS 1035270200 316 X 11 112

44 400 NOS 10220 316 X II 2

45 250 NOS 10370 114 X 1 112

46 200 NOS 0390 114

X 2 I

47 40 NOS I 0840 38 X 1 112 Countersunk head mild steel BSWthreaded screw in according to BS450-1952 NOMINAL DIA LENGTH

48 400 NOS 1035280330 114 X 112

I

I

NFthreaded screws HH bright mild steel according to ASAnoBI8 2-1935 table 5 thread to ASAnoB 1-1935 NOMINAL DIA I LENGTH

49 20 NOS 1035291040 716 X 34

50 150 NOS 1035291280 112 X 1 51 75 NOS 1035291940 58 X 2

3-7

IT aTY I UNIT VOCAB NO DESCRIPTION NC threaded screws of bright mild steel hexagon head according toASA noBl8 - 2-1935 table 5ampthreaded to ASAnoII-1935 NOMINAL DIA LENGTH

52 400 NOS 1035300350 114 X 1 53 150 NOS 0590 516 X 1 54 125 NOS 0630 516 I X 2 55 100 NOS 1280 112 I X 1

~

56 100 NOS 1400 112 X 4 57 100 NOS 1480 112 X 6

Hexagon head mild steel BSFthreaded screw according to BS1083-1951 NOMINAL DIA LENGTH

58 100 NOS 10353110390 114 X 2 59 50 NOS 0570 516 X 112 60 100 NOS 0630 516 X 2 61 60 NOS 1280 112 X 1 62 50 NOS 1320 112 X 2 63 30 NOS 1360 112 X 3

I Screw according to BS2470-1954 threaded UNCmaterial to be high tensile allenkey or similar quality NOMINAL DIA LENGTH

64 40 I NOS 1035400410 114 X 2112 65 150 NOS 0570 516 X 112 66 150 I

NOS 0610 516 X 1 112 67 200 NOS 0630 516 X 2 68 300 NOS 0820 38 X 1

69 150 NOS 0840 38 X 1 112

70 100 NOS 0880 38 X 2 112

71 10 NOS 3090 I 78 X 1

72 14 NOS 3550 I 1 X 1 112 UNC HEX SOCKET HEXAGON SOCKET SET SCREWS ACCORDING TO BS2470-1954 THREADED UNCMATERIAL TO BE HIGH TENSILE

I ALLENKEY OR SIMILAR QUALITY NOMINAL DIA LENGTH

73 75 NOS 10354111940 58 X 2

I 74 15 NOS 10354113130 I 78 I X 2 I

75 15 NOS 3570 1 I

X 2

[I

4-7

shy

~

IT QTY UNIT VOCAB NO DESCRIPTION SCREWS IN METRIC SYSTEM HEXAGONAL SOCKET SET SCREWS

SIZE LENGTH 76 500 NOS

I 1036252342 8m I

16mm

77 500 NOS 2860 10m 25mm

78 500 NOS 2880 lOx 35mm

i VNetbreaded stud of carbon steel to BS1750-1951 PT3 j material to BS 1506-101

NOMINAL DIA LENGTH

79 100 NOS 10401111960 58 X 2 112

Stud L7 threaded bar stock in accordance ASTMA 320-55T for low temp service in random lengths of6-10-Ft

DIAMETER 80 200 Ft 1040140090 58

UNCALLOY STEEL B7 STUD BOLTS THREADED FULL LENGTH(UNC)WITH TWO NUTSSTUD IN ACCORDANCE WITH BS1750shy

I 1951PTl ASTM A-193 GRADE B-7 AND STAMPED ON ONE END WITH B-7 NUTS IN ACCORDANCE WITH B-7 1750-1951PT2 GREAD 2HampSTAMP WITH SYMBOL 2H THREAD FITS2A AND 2B

I NOMINAL DIA LENGTH I I

81 2000 NOS 1040171020 38 X 6studamp2nuts

82 2000 NOS 2210 58 X 14Studamp2nuts

83 2000 NOS 2230 58 I

X 16 Studamp2nuts

84 8000 NOS 2780 34 X 4112 85 2000 NOS 2840 34 X 6 86 2000 NOS

I 3050 34 X 12Stud bolt B7

With two nuts 87 2000 NOS

I 3880 1 X 12Studamp2nuts 88 400 NOS 7500 16mm X

I

220mm stud bolt With two nuts

B-7 ALLOY STEEL I STUD BOLTS ALLOY STEEL FULL THREADED BAR UNC TEMPERED AT ItOOF TO ASTMA-193 GRADE B-7

I IN RANDOM LENGTH OF 6-10FT SIZE

89 500 FT 1040180080 112 90 500 FT 1040180140 78 91 1000 FT 0160 1Stud bar

VNC B7 92 15 FT 1040180220 1 38

5-7

IT QTY UNIT VOCAB NO DESCRIPTION Stud b14-threaded bar stock in accordance with BS1750shy1951PT1threaded IT 2Amaterial to BS1506-661 in random lengths of6-10 FT

DIAMETER

93 25 FT 1

1040190120 78

94 40 FT 1040190130 1

1

95 25 FT 1040190140 1 118

96 40 I

FT 1040190150 1 114

Bright mild steel washers flat heavy pattern for whitworth thread to BS1083-1951 SIZE LENGTH

97 1500 NOS 1045142040 114 100

98 150 NOS 1045142180 1 118 100 Galvanized mild steel flatwashers to BS 1494-951 Galvanized diamond shaped washers

I

SIZE LENGTH

99 750 NOS 1045150550 516 100 ID

I Spring washers single coil black square section in accordance with BS1802-1951 table 3type A

1 SIZE LENGTH

100 200 NOS I

1045300030 316 100 101 750 NOS I 0080 112 100 102 500 NOS 0100 58 100

(single coil square type A) metric single coil square section steel sparing washer

NOMINAL

103 2000 NOS 1046300082 m6

104 2000 NOS 0102 m10

6-7

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 5: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12672018 BOLTS amp NUT 104 ITEMS 7619443 $ TWICE 2200 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12672018

IT QTY UNIT VOCAB NO DESCRIPTION BOlTSampNUTS RIVETS ETC

BSFthreaded boltsampnuts of bright mild steel according I to BSI0S3-1951 with full hexagonal head

NOMINAL DIA LENGTH

1 75 NOS I 1010100160 I 316 x 112 2 150 NOS 01S0 II 316 x 1

3 150 NOS 0200 316 x 1112

4 100 NOS 0220 316 x 2 5 75 NOS 0390 114 x 2 I

6 100 NOS 1320 112 x 2

7 200 NOS 1920 5S x 1112 8 75 NOS 2000 5S x 3112

BSW threaded boltsampnuts of bright mild steel according to BSI0S3-1951 with full hexagonal head MSbright N()MINAl DIA lENGTH

9 500 NOS 1010210180 316 x 1 10 1500 NOS 0340 114 x 34 11 3000 I NOS 0590 516 x 1 12 150

I

NOS 1290 112 1114I x 13 100 NOS 1440 112 x 5 14 75 NOS 14S0 112 x 6 15 150 NOS 2060 5S x 5

16 60 NOS 2S40 34 x 6

17 15 NOS 3570 1 x 2

18 50 NOS 3730 1 x 6

(JBOLT)hook boltampnut MSgalvsqunut with I worth thread to BS1949-1951

NOMINAL DIA lENGTH

19 400 NOS 1010320790 516 x 6

UNCthread boltsampnut of IS-S stainless steel NOMINAL DIA lENGTH

I

20 30 NOS 10106426S0 34 x 2

1- 7

IT QTY- UNIT VOGAB NO DESCRIPTION IANCHORING BOLTS(ROUND BOLTS

LOOSEampPROJECTING TYPE) STUD TYPE EXPANSION BOLTS

NOMINAL DIA LENGTH

21 280 NOS 1010820400 114 X 2114 ~~

22 280 NOS 1010820710 516 I X 4type D-5 23 150 NOS 1010820900 38 II X 3~ty~e E- 19 24 100 NOS 1010821380 12 X type G-18

3 112

I Roofing type boltampnuts LE galvanized bolt with slotted round head amp square Duts threaded BSW to BS 1494-1951 NOMINAL DIA LENGTH

25 200 NOS 1010840860 38 X I 2 Boltsampnuts black mild steel hexagonal head one end and screwed another end furnished with one hexagonal nut metric standard thread

I NOMINAL DIA LENGTH 26 800 NOS I 1011043352 12mm X 20mm

27 500 NOS

I

1011043602 12mm X 220mm boltampnut

I

III

BSFthreaded nuts BSFbright mild steel nuts hexagonal according to JS 1083-1951

SIZE

28 400 NOS 1020220050 516 NF threaded bright mild steel nuts hex

SIZE 29 150 NOS 1020520060 38 30 100 NOS 0070 716 31

I 75 NOS 0100 58 UNCTHREAD NUTS STAINLESS STEEL HEX

SIZE DIA 32 100 NOS 1020600060 38UNC stainless steel hex full nuts

rcf S39 33 300 NOS 1020600080 112 UNC SS hex full nuts

UNCTHREADED NUTS HEXAGONAL GRADE 2HACCORDING TO BS1750-1951 PT2THREADED FIT 2B

I

USE WITH B7 STUDOR TO ASTM A194 SIZE

34 250 NOS 102062024 0 1 112 I

UNC grade 4-nuts hexagonal according to BS1750-1951 PT2- threaded fit 2Bmaterial to BS1506-240 tube use with L7 stud

SIZE 35 90 NOS 1020640210 1

2-7

IT aTY UNIT VOCAB NO DESCRIPTION Black metricstandard hexagonal nutsmaterial high tensile steel (NOMINAL DIAMM)

I SIZE 36 1250 NOS 1021100080 m6

Cheese head(or round head)brass screw BAthreaded according to BS75-1951

I SIZE I DIA LENGTH 37 I 100 NOS 1035200320 1 I 4BAishy

- Cheese head(or round head)brass screw BAthreaded according to BS57 -1951 NOMINAL DIA LENGTH

38 175 NOS 10352110340 1112 4BA SCREWS BS WMSTEELHEXHEAD Hexagen head mildsteel BSWthreaded screws in accordance with BS 10831951

II NOMINAL DIA I LENGTH

39 I 250 NOS 1035240390 1114 I X 2

40 100 NOS 1035242680 34 X 2 Countersunk head mild steel BSFthreaded screws according to BS450-1952 NOMINAL DIA LENGTH

41 150 (Each box 1035260370 114 X 1 112 IONos) Nos

42 15 Each box 1035260610 516 X 1 112 IONos)

Nos

I Cheese(or round)head mild steel BSWthreaded screws in accordance with BS 450-1932 NOMINAL DlA LENGTH

43 100 NOS 1035270200 316 X 11 112

44 400 NOS 10220 316 X II 2

45 250 NOS 10370 114 X 1 112

46 200 NOS 0390 114

X 2 I

47 40 NOS I 0840 38 X 1 112 Countersunk head mild steel BSWthreaded screw in according to BS450-1952 NOMINAL DIA LENGTH

48 400 NOS 1035280330 114 X 112

I

I

NFthreaded screws HH bright mild steel according to ASAnoBI8 2-1935 table 5 thread to ASAnoB 1-1935 NOMINAL DIA I LENGTH

49 20 NOS 1035291040 716 X 34

50 150 NOS 1035291280 112 X 1 51 75 NOS 1035291940 58 X 2

3-7

IT aTY I UNIT VOCAB NO DESCRIPTION NC threaded screws of bright mild steel hexagon head according toASA noBl8 - 2-1935 table 5ampthreaded to ASAnoII-1935 NOMINAL DIA LENGTH

52 400 NOS 1035300350 114 X 1 53 150 NOS 0590 516 X 1 54 125 NOS 0630 516 I X 2 55 100 NOS 1280 112 I X 1

~

56 100 NOS 1400 112 X 4 57 100 NOS 1480 112 X 6

Hexagon head mild steel BSFthreaded screw according to BS1083-1951 NOMINAL DIA LENGTH

58 100 NOS 10353110390 114 X 2 59 50 NOS 0570 516 X 112 60 100 NOS 0630 516 X 2 61 60 NOS 1280 112 X 1 62 50 NOS 1320 112 X 2 63 30 NOS 1360 112 X 3

I Screw according to BS2470-1954 threaded UNCmaterial to be high tensile allenkey or similar quality NOMINAL DIA LENGTH

64 40 I NOS 1035400410 114 X 2112 65 150 NOS 0570 516 X 112 66 150 I

NOS 0610 516 X 1 112 67 200 NOS 0630 516 X 2 68 300 NOS 0820 38 X 1

69 150 NOS 0840 38 X 1 112

70 100 NOS 0880 38 X 2 112

71 10 NOS 3090 I 78 X 1

72 14 NOS 3550 I 1 X 1 112 UNC HEX SOCKET HEXAGON SOCKET SET SCREWS ACCORDING TO BS2470-1954 THREADED UNCMATERIAL TO BE HIGH TENSILE

I ALLENKEY OR SIMILAR QUALITY NOMINAL DIA LENGTH

73 75 NOS 10354111940 58 X 2

I 74 15 NOS 10354113130 I 78 I X 2 I

75 15 NOS 3570 1 I

X 2

[I

4-7

shy

~

IT QTY UNIT VOCAB NO DESCRIPTION SCREWS IN METRIC SYSTEM HEXAGONAL SOCKET SET SCREWS

SIZE LENGTH 76 500 NOS

I 1036252342 8m I

16mm

77 500 NOS 2860 10m 25mm

78 500 NOS 2880 lOx 35mm

i VNetbreaded stud of carbon steel to BS1750-1951 PT3 j material to BS 1506-101

NOMINAL DIA LENGTH

79 100 NOS 10401111960 58 X 2 112

Stud L7 threaded bar stock in accordance ASTMA 320-55T for low temp service in random lengths of6-10-Ft

DIAMETER 80 200 Ft 1040140090 58

UNCALLOY STEEL B7 STUD BOLTS THREADED FULL LENGTH(UNC)WITH TWO NUTSSTUD IN ACCORDANCE WITH BS1750shy

I 1951PTl ASTM A-193 GRADE B-7 AND STAMPED ON ONE END WITH B-7 NUTS IN ACCORDANCE WITH B-7 1750-1951PT2 GREAD 2HampSTAMP WITH SYMBOL 2H THREAD FITS2A AND 2B

I NOMINAL DIA LENGTH I I

81 2000 NOS 1040171020 38 X 6studamp2nuts

82 2000 NOS 2210 58 X 14Studamp2nuts

83 2000 NOS 2230 58 I

X 16 Studamp2nuts

84 8000 NOS 2780 34 X 4112 85 2000 NOS 2840 34 X 6 86 2000 NOS

I 3050 34 X 12Stud bolt B7

With two nuts 87 2000 NOS

I 3880 1 X 12Studamp2nuts 88 400 NOS 7500 16mm X

I

220mm stud bolt With two nuts

B-7 ALLOY STEEL I STUD BOLTS ALLOY STEEL FULL THREADED BAR UNC TEMPERED AT ItOOF TO ASTMA-193 GRADE B-7

I IN RANDOM LENGTH OF 6-10FT SIZE

89 500 FT 1040180080 112 90 500 FT 1040180140 78 91 1000 FT 0160 1Stud bar

VNC B7 92 15 FT 1040180220 1 38

5-7

IT QTY UNIT VOCAB NO DESCRIPTION Stud b14-threaded bar stock in accordance with BS1750shy1951PT1threaded IT 2Amaterial to BS1506-661 in random lengths of6-10 FT

DIAMETER

93 25 FT 1

1040190120 78

94 40 FT 1040190130 1

1

95 25 FT 1040190140 1 118

96 40 I

FT 1040190150 1 114

Bright mild steel washers flat heavy pattern for whitworth thread to BS1083-1951 SIZE LENGTH

97 1500 NOS 1045142040 114 100

98 150 NOS 1045142180 1 118 100 Galvanized mild steel flatwashers to BS 1494-951 Galvanized diamond shaped washers

I

SIZE LENGTH

99 750 NOS 1045150550 516 100 ID

I Spring washers single coil black square section in accordance with BS1802-1951 table 3type A

1 SIZE LENGTH

100 200 NOS I

1045300030 316 100 101 750 NOS I 0080 112 100 102 500 NOS 0100 58 100

(single coil square type A) metric single coil square section steel sparing washer

NOMINAL

103 2000 NOS 1046300082 m6

104 2000 NOS 0102 m10

6-7

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 6: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12672018

IT QTY UNIT VOCAB NO DESCRIPTION BOlTSampNUTS RIVETS ETC

BSFthreaded boltsampnuts of bright mild steel according I to BSI0S3-1951 with full hexagonal head

NOMINAL DIA LENGTH

1 75 NOS I 1010100160 I 316 x 112 2 150 NOS 01S0 II 316 x 1

3 150 NOS 0200 316 x 1112

4 100 NOS 0220 316 x 2 5 75 NOS 0390 114 x 2 I

6 100 NOS 1320 112 x 2

7 200 NOS 1920 5S x 1112 8 75 NOS 2000 5S x 3112

BSW threaded boltsampnuts of bright mild steel according to BSI0S3-1951 with full hexagonal head MSbright N()MINAl DIA lENGTH

9 500 NOS 1010210180 316 x 1 10 1500 NOS 0340 114 x 34 11 3000 I NOS 0590 516 x 1 12 150

I

NOS 1290 112 1114I x 13 100 NOS 1440 112 x 5 14 75 NOS 14S0 112 x 6 15 150 NOS 2060 5S x 5

16 60 NOS 2S40 34 x 6

17 15 NOS 3570 1 x 2

18 50 NOS 3730 1 x 6

(JBOLT)hook boltampnut MSgalvsqunut with I worth thread to BS1949-1951

NOMINAL DIA lENGTH

19 400 NOS 1010320790 516 x 6

UNCthread boltsampnut of IS-S stainless steel NOMINAL DIA lENGTH

I

20 30 NOS 10106426S0 34 x 2

1- 7

IT QTY- UNIT VOGAB NO DESCRIPTION IANCHORING BOLTS(ROUND BOLTS

LOOSEampPROJECTING TYPE) STUD TYPE EXPANSION BOLTS

NOMINAL DIA LENGTH

21 280 NOS 1010820400 114 X 2114 ~~

22 280 NOS 1010820710 516 I X 4type D-5 23 150 NOS 1010820900 38 II X 3~ty~e E- 19 24 100 NOS 1010821380 12 X type G-18

3 112

I Roofing type boltampnuts LE galvanized bolt with slotted round head amp square Duts threaded BSW to BS 1494-1951 NOMINAL DIA LENGTH

25 200 NOS 1010840860 38 X I 2 Boltsampnuts black mild steel hexagonal head one end and screwed another end furnished with one hexagonal nut metric standard thread

I NOMINAL DIA LENGTH 26 800 NOS I 1011043352 12mm X 20mm

27 500 NOS

I

1011043602 12mm X 220mm boltampnut

I

III

BSFthreaded nuts BSFbright mild steel nuts hexagonal according to JS 1083-1951

SIZE

28 400 NOS 1020220050 516 NF threaded bright mild steel nuts hex

SIZE 29 150 NOS 1020520060 38 30 100 NOS 0070 716 31

I 75 NOS 0100 58 UNCTHREAD NUTS STAINLESS STEEL HEX

SIZE DIA 32 100 NOS 1020600060 38UNC stainless steel hex full nuts

rcf S39 33 300 NOS 1020600080 112 UNC SS hex full nuts

UNCTHREADED NUTS HEXAGONAL GRADE 2HACCORDING TO BS1750-1951 PT2THREADED FIT 2B

I

USE WITH B7 STUDOR TO ASTM A194 SIZE

34 250 NOS 102062024 0 1 112 I

UNC grade 4-nuts hexagonal according to BS1750-1951 PT2- threaded fit 2Bmaterial to BS1506-240 tube use with L7 stud

SIZE 35 90 NOS 1020640210 1

2-7

IT aTY UNIT VOCAB NO DESCRIPTION Black metricstandard hexagonal nutsmaterial high tensile steel (NOMINAL DIAMM)

I SIZE 36 1250 NOS 1021100080 m6

Cheese head(or round head)brass screw BAthreaded according to BS75-1951

I SIZE I DIA LENGTH 37 I 100 NOS 1035200320 1 I 4BAishy

- Cheese head(or round head)brass screw BAthreaded according to BS57 -1951 NOMINAL DIA LENGTH

38 175 NOS 10352110340 1112 4BA SCREWS BS WMSTEELHEXHEAD Hexagen head mildsteel BSWthreaded screws in accordance with BS 10831951

II NOMINAL DIA I LENGTH

39 I 250 NOS 1035240390 1114 I X 2

40 100 NOS 1035242680 34 X 2 Countersunk head mild steel BSFthreaded screws according to BS450-1952 NOMINAL DIA LENGTH

41 150 (Each box 1035260370 114 X 1 112 IONos) Nos

42 15 Each box 1035260610 516 X 1 112 IONos)

Nos

I Cheese(or round)head mild steel BSWthreaded screws in accordance with BS 450-1932 NOMINAL DlA LENGTH

43 100 NOS 1035270200 316 X 11 112

44 400 NOS 10220 316 X II 2

45 250 NOS 10370 114 X 1 112

46 200 NOS 0390 114

X 2 I

47 40 NOS I 0840 38 X 1 112 Countersunk head mild steel BSWthreaded screw in according to BS450-1952 NOMINAL DIA LENGTH

48 400 NOS 1035280330 114 X 112

I

I

NFthreaded screws HH bright mild steel according to ASAnoBI8 2-1935 table 5 thread to ASAnoB 1-1935 NOMINAL DIA I LENGTH

49 20 NOS 1035291040 716 X 34

50 150 NOS 1035291280 112 X 1 51 75 NOS 1035291940 58 X 2

3-7

IT aTY I UNIT VOCAB NO DESCRIPTION NC threaded screws of bright mild steel hexagon head according toASA noBl8 - 2-1935 table 5ampthreaded to ASAnoII-1935 NOMINAL DIA LENGTH

52 400 NOS 1035300350 114 X 1 53 150 NOS 0590 516 X 1 54 125 NOS 0630 516 I X 2 55 100 NOS 1280 112 I X 1

~

56 100 NOS 1400 112 X 4 57 100 NOS 1480 112 X 6

Hexagon head mild steel BSFthreaded screw according to BS1083-1951 NOMINAL DIA LENGTH

58 100 NOS 10353110390 114 X 2 59 50 NOS 0570 516 X 112 60 100 NOS 0630 516 X 2 61 60 NOS 1280 112 X 1 62 50 NOS 1320 112 X 2 63 30 NOS 1360 112 X 3

I Screw according to BS2470-1954 threaded UNCmaterial to be high tensile allenkey or similar quality NOMINAL DIA LENGTH

64 40 I NOS 1035400410 114 X 2112 65 150 NOS 0570 516 X 112 66 150 I

NOS 0610 516 X 1 112 67 200 NOS 0630 516 X 2 68 300 NOS 0820 38 X 1

69 150 NOS 0840 38 X 1 112

70 100 NOS 0880 38 X 2 112

71 10 NOS 3090 I 78 X 1

72 14 NOS 3550 I 1 X 1 112 UNC HEX SOCKET HEXAGON SOCKET SET SCREWS ACCORDING TO BS2470-1954 THREADED UNCMATERIAL TO BE HIGH TENSILE

I ALLENKEY OR SIMILAR QUALITY NOMINAL DIA LENGTH

73 75 NOS 10354111940 58 X 2

I 74 15 NOS 10354113130 I 78 I X 2 I

75 15 NOS 3570 1 I

X 2

[I

4-7

shy

~

IT QTY UNIT VOCAB NO DESCRIPTION SCREWS IN METRIC SYSTEM HEXAGONAL SOCKET SET SCREWS

SIZE LENGTH 76 500 NOS

I 1036252342 8m I

16mm

77 500 NOS 2860 10m 25mm

78 500 NOS 2880 lOx 35mm

i VNetbreaded stud of carbon steel to BS1750-1951 PT3 j material to BS 1506-101

NOMINAL DIA LENGTH

79 100 NOS 10401111960 58 X 2 112

Stud L7 threaded bar stock in accordance ASTMA 320-55T for low temp service in random lengths of6-10-Ft

DIAMETER 80 200 Ft 1040140090 58

UNCALLOY STEEL B7 STUD BOLTS THREADED FULL LENGTH(UNC)WITH TWO NUTSSTUD IN ACCORDANCE WITH BS1750shy

I 1951PTl ASTM A-193 GRADE B-7 AND STAMPED ON ONE END WITH B-7 NUTS IN ACCORDANCE WITH B-7 1750-1951PT2 GREAD 2HampSTAMP WITH SYMBOL 2H THREAD FITS2A AND 2B

I NOMINAL DIA LENGTH I I

81 2000 NOS 1040171020 38 X 6studamp2nuts

82 2000 NOS 2210 58 X 14Studamp2nuts

83 2000 NOS 2230 58 I

X 16 Studamp2nuts

84 8000 NOS 2780 34 X 4112 85 2000 NOS 2840 34 X 6 86 2000 NOS

I 3050 34 X 12Stud bolt B7

With two nuts 87 2000 NOS

I 3880 1 X 12Studamp2nuts 88 400 NOS 7500 16mm X

I

220mm stud bolt With two nuts

B-7 ALLOY STEEL I STUD BOLTS ALLOY STEEL FULL THREADED BAR UNC TEMPERED AT ItOOF TO ASTMA-193 GRADE B-7

I IN RANDOM LENGTH OF 6-10FT SIZE

89 500 FT 1040180080 112 90 500 FT 1040180140 78 91 1000 FT 0160 1Stud bar

VNC B7 92 15 FT 1040180220 1 38

5-7

IT QTY UNIT VOCAB NO DESCRIPTION Stud b14-threaded bar stock in accordance with BS1750shy1951PT1threaded IT 2Amaterial to BS1506-661 in random lengths of6-10 FT

DIAMETER

93 25 FT 1

1040190120 78

94 40 FT 1040190130 1

1

95 25 FT 1040190140 1 118

96 40 I

FT 1040190150 1 114

Bright mild steel washers flat heavy pattern for whitworth thread to BS1083-1951 SIZE LENGTH

97 1500 NOS 1045142040 114 100

98 150 NOS 1045142180 1 118 100 Galvanized mild steel flatwashers to BS 1494-951 Galvanized diamond shaped washers

I

SIZE LENGTH

99 750 NOS 1045150550 516 100 ID

I Spring washers single coil black square section in accordance with BS1802-1951 table 3type A

1 SIZE LENGTH

100 200 NOS I

1045300030 316 100 101 750 NOS I 0080 112 100 102 500 NOS 0100 58 100

(single coil square type A) metric single coil square section steel sparing washer

NOMINAL

103 2000 NOS 1046300082 m6

104 2000 NOS 0102 m10

6-7

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 7: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

REONO 12672018

IT QTY UNIT VOCAB NO DESCRIPTION BOlTSampNUTS RIVETS ETC

BSFthreaded boltsampnuts of bright mild steel according I to BSI0S3-1951 with full hexagonal head

NOMINAL DIA LENGTH

1 75 NOS I 1010100160 I 316 x 112 2 150 NOS 01S0 II 316 x 1

3 150 NOS 0200 316 x 1112

4 100 NOS 0220 316 x 2 5 75 NOS 0390 114 x 2 I

6 100 NOS 1320 112 x 2

7 200 NOS 1920 5S x 1112 8 75 NOS 2000 5S x 3112

BSW threaded boltsampnuts of bright mild steel according to BSI0S3-1951 with full hexagonal head MSbright N()MINAl DIA lENGTH

9 500 NOS 1010210180 316 x 1 10 1500 NOS 0340 114 x 34 11 3000 I NOS 0590 516 x 1 12 150

I

NOS 1290 112 1114I x 13 100 NOS 1440 112 x 5 14 75 NOS 14S0 112 x 6 15 150 NOS 2060 5S x 5

16 60 NOS 2S40 34 x 6

17 15 NOS 3570 1 x 2

18 50 NOS 3730 1 x 6

(JBOLT)hook boltampnut MSgalvsqunut with I worth thread to BS1949-1951

NOMINAL DIA lENGTH

19 400 NOS 1010320790 516 x 6

UNCthread boltsampnut of IS-S stainless steel NOMINAL DIA lENGTH

I

20 30 NOS 10106426S0 34 x 2

1- 7

IT QTY- UNIT VOGAB NO DESCRIPTION IANCHORING BOLTS(ROUND BOLTS

LOOSEampPROJECTING TYPE) STUD TYPE EXPANSION BOLTS

NOMINAL DIA LENGTH

21 280 NOS 1010820400 114 X 2114 ~~

22 280 NOS 1010820710 516 I X 4type D-5 23 150 NOS 1010820900 38 II X 3~ty~e E- 19 24 100 NOS 1010821380 12 X type G-18

3 112

I Roofing type boltampnuts LE galvanized bolt with slotted round head amp square Duts threaded BSW to BS 1494-1951 NOMINAL DIA LENGTH

25 200 NOS 1010840860 38 X I 2 Boltsampnuts black mild steel hexagonal head one end and screwed another end furnished with one hexagonal nut metric standard thread

I NOMINAL DIA LENGTH 26 800 NOS I 1011043352 12mm X 20mm

27 500 NOS

I

1011043602 12mm X 220mm boltampnut

I

III

BSFthreaded nuts BSFbright mild steel nuts hexagonal according to JS 1083-1951

SIZE

28 400 NOS 1020220050 516 NF threaded bright mild steel nuts hex

SIZE 29 150 NOS 1020520060 38 30 100 NOS 0070 716 31

I 75 NOS 0100 58 UNCTHREAD NUTS STAINLESS STEEL HEX

SIZE DIA 32 100 NOS 1020600060 38UNC stainless steel hex full nuts

rcf S39 33 300 NOS 1020600080 112 UNC SS hex full nuts

UNCTHREADED NUTS HEXAGONAL GRADE 2HACCORDING TO BS1750-1951 PT2THREADED FIT 2B

I

USE WITH B7 STUDOR TO ASTM A194 SIZE

34 250 NOS 102062024 0 1 112 I

UNC grade 4-nuts hexagonal according to BS1750-1951 PT2- threaded fit 2Bmaterial to BS1506-240 tube use with L7 stud

SIZE 35 90 NOS 1020640210 1

2-7

IT aTY UNIT VOCAB NO DESCRIPTION Black metricstandard hexagonal nutsmaterial high tensile steel (NOMINAL DIAMM)

I SIZE 36 1250 NOS 1021100080 m6

Cheese head(or round head)brass screw BAthreaded according to BS75-1951

I SIZE I DIA LENGTH 37 I 100 NOS 1035200320 1 I 4BAishy

- Cheese head(or round head)brass screw BAthreaded according to BS57 -1951 NOMINAL DIA LENGTH

38 175 NOS 10352110340 1112 4BA SCREWS BS WMSTEELHEXHEAD Hexagen head mildsteel BSWthreaded screws in accordance with BS 10831951

II NOMINAL DIA I LENGTH

39 I 250 NOS 1035240390 1114 I X 2

40 100 NOS 1035242680 34 X 2 Countersunk head mild steel BSFthreaded screws according to BS450-1952 NOMINAL DIA LENGTH

41 150 (Each box 1035260370 114 X 1 112 IONos) Nos

42 15 Each box 1035260610 516 X 1 112 IONos)

Nos

I Cheese(or round)head mild steel BSWthreaded screws in accordance with BS 450-1932 NOMINAL DlA LENGTH

43 100 NOS 1035270200 316 X 11 112

44 400 NOS 10220 316 X II 2

45 250 NOS 10370 114 X 1 112

46 200 NOS 0390 114

X 2 I

47 40 NOS I 0840 38 X 1 112 Countersunk head mild steel BSWthreaded screw in according to BS450-1952 NOMINAL DIA LENGTH

48 400 NOS 1035280330 114 X 112

I

I

NFthreaded screws HH bright mild steel according to ASAnoBI8 2-1935 table 5 thread to ASAnoB 1-1935 NOMINAL DIA I LENGTH

49 20 NOS 1035291040 716 X 34

50 150 NOS 1035291280 112 X 1 51 75 NOS 1035291940 58 X 2

3-7

IT aTY I UNIT VOCAB NO DESCRIPTION NC threaded screws of bright mild steel hexagon head according toASA noBl8 - 2-1935 table 5ampthreaded to ASAnoII-1935 NOMINAL DIA LENGTH

52 400 NOS 1035300350 114 X 1 53 150 NOS 0590 516 X 1 54 125 NOS 0630 516 I X 2 55 100 NOS 1280 112 I X 1

~

56 100 NOS 1400 112 X 4 57 100 NOS 1480 112 X 6

Hexagon head mild steel BSFthreaded screw according to BS1083-1951 NOMINAL DIA LENGTH

58 100 NOS 10353110390 114 X 2 59 50 NOS 0570 516 X 112 60 100 NOS 0630 516 X 2 61 60 NOS 1280 112 X 1 62 50 NOS 1320 112 X 2 63 30 NOS 1360 112 X 3

I Screw according to BS2470-1954 threaded UNCmaterial to be high tensile allenkey or similar quality NOMINAL DIA LENGTH

64 40 I NOS 1035400410 114 X 2112 65 150 NOS 0570 516 X 112 66 150 I

NOS 0610 516 X 1 112 67 200 NOS 0630 516 X 2 68 300 NOS 0820 38 X 1

69 150 NOS 0840 38 X 1 112

70 100 NOS 0880 38 X 2 112

71 10 NOS 3090 I 78 X 1

72 14 NOS 3550 I 1 X 1 112 UNC HEX SOCKET HEXAGON SOCKET SET SCREWS ACCORDING TO BS2470-1954 THREADED UNCMATERIAL TO BE HIGH TENSILE

I ALLENKEY OR SIMILAR QUALITY NOMINAL DIA LENGTH

73 75 NOS 10354111940 58 X 2

I 74 15 NOS 10354113130 I 78 I X 2 I

75 15 NOS 3570 1 I

X 2

[I

4-7

shy

~

IT QTY UNIT VOCAB NO DESCRIPTION SCREWS IN METRIC SYSTEM HEXAGONAL SOCKET SET SCREWS

SIZE LENGTH 76 500 NOS

I 1036252342 8m I

16mm

77 500 NOS 2860 10m 25mm

78 500 NOS 2880 lOx 35mm

i VNetbreaded stud of carbon steel to BS1750-1951 PT3 j material to BS 1506-101

NOMINAL DIA LENGTH

79 100 NOS 10401111960 58 X 2 112

Stud L7 threaded bar stock in accordance ASTMA 320-55T for low temp service in random lengths of6-10-Ft

DIAMETER 80 200 Ft 1040140090 58

UNCALLOY STEEL B7 STUD BOLTS THREADED FULL LENGTH(UNC)WITH TWO NUTSSTUD IN ACCORDANCE WITH BS1750shy

I 1951PTl ASTM A-193 GRADE B-7 AND STAMPED ON ONE END WITH B-7 NUTS IN ACCORDANCE WITH B-7 1750-1951PT2 GREAD 2HampSTAMP WITH SYMBOL 2H THREAD FITS2A AND 2B

I NOMINAL DIA LENGTH I I

81 2000 NOS 1040171020 38 X 6studamp2nuts

82 2000 NOS 2210 58 X 14Studamp2nuts

83 2000 NOS 2230 58 I

X 16 Studamp2nuts

84 8000 NOS 2780 34 X 4112 85 2000 NOS 2840 34 X 6 86 2000 NOS

I 3050 34 X 12Stud bolt B7

With two nuts 87 2000 NOS

I 3880 1 X 12Studamp2nuts 88 400 NOS 7500 16mm X

I

220mm stud bolt With two nuts

B-7 ALLOY STEEL I STUD BOLTS ALLOY STEEL FULL THREADED BAR UNC TEMPERED AT ItOOF TO ASTMA-193 GRADE B-7

I IN RANDOM LENGTH OF 6-10FT SIZE

89 500 FT 1040180080 112 90 500 FT 1040180140 78 91 1000 FT 0160 1Stud bar

VNC B7 92 15 FT 1040180220 1 38

5-7

IT QTY UNIT VOCAB NO DESCRIPTION Stud b14-threaded bar stock in accordance with BS1750shy1951PT1threaded IT 2Amaterial to BS1506-661 in random lengths of6-10 FT

DIAMETER

93 25 FT 1

1040190120 78

94 40 FT 1040190130 1

1

95 25 FT 1040190140 1 118

96 40 I

FT 1040190150 1 114

Bright mild steel washers flat heavy pattern for whitworth thread to BS1083-1951 SIZE LENGTH

97 1500 NOS 1045142040 114 100

98 150 NOS 1045142180 1 118 100 Galvanized mild steel flatwashers to BS 1494-951 Galvanized diamond shaped washers

I

SIZE LENGTH

99 750 NOS 1045150550 516 100 ID

I Spring washers single coil black square section in accordance with BS1802-1951 table 3type A

1 SIZE LENGTH

100 200 NOS I

1045300030 316 100 101 750 NOS I 0080 112 100 102 500 NOS 0100 58 100

(single coil square type A) metric single coil square section steel sparing washer

NOMINAL

103 2000 NOS 1046300082 m6

104 2000 NOS 0102 m10

6-7

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 8: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

IT QTY- UNIT VOGAB NO DESCRIPTION IANCHORING BOLTS(ROUND BOLTS

LOOSEampPROJECTING TYPE) STUD TYPE EXPANSION BOLTS

NOMINAL DIA LENGTH

21 280 NOS 1010820400 114 X 2114 ~~

22 280 NOS 1010820710 516 I X 4type D-5 23 150 NOS 1010820900 38 II X 3~ty~e E- 19 24 100 NOS 1010821380 12 X type G-18

3 112

I Roofing type boltampnuts LE galvanized bolt with slotted round head amp square Duts threaded BSW to BS 1494-1951 NOMINAL DIA LENGTH

25 200 NOS 1010840860 38 X I 2 Boltsampnuts black mild steel hexagonal head one end and screwed another end furnished with one hexagonal nut metric standard thread

I NOMINAL DIA LENGTH 26 800 NOS I 1011043352 12mm X 20mm

27 500 NOS

I

1011043602 12mm X 220mm boltampnut

I

III

BSFthreaded nuts BSFbright mild steel nuts hexagonal according to JS 1083-1951

SIZE

28 400 NOS 1020220050 516 NF threaded bright mild steel nuts hex

SIZE 29 150 NOS 1020520060 38 30 100 NOS 0070 716 31

I 75 NOS 0100 58 UNCTHREAD NUTS STAINLESS STEEL HEX

SIZE DIA 32 100 NOS 1020600060 38UNC stainless steel hex full nuts

rcf S39 33 300 NOS 1020600080 112 UNC SS hex full nuts

UNCTHREADED NUTS HEXAGONAL GRADE 2HACCORDING TO BS1750-1951 PT2THREADED FIT 2B

I

USE WITH B7 STUDOR TO ASTM A194 SIZE

34 250 NOS 102062024 0 1 112 I

UNC grade 4-nuts hexagonal according to BS1750-1951 PT2- threaded fit 2Bmaterial to BS1506-240 tube use with L7 stud

SIZE 35 90 NOS 1020640210 1

2-7

IT aTY UNIT VOCAB NO DESCRIPTION Black metricstandard hexagonal nutsmaterial high tensile steel (NOMINAL DIAMM)

I SIZE 36 1250 NOS 1021100080 m6

Cheese head(or round head)brass screw BAthreaded according to BS75-1951

I SIZE I DIA LENGTH 37 I 100 NOS 1035200320 1 I 4BAishy

- Cheese head(or round head)brass screw BAthreaded according to BS57 -1951 NOMINAL DIA LENGTH

38 175 NOS 10352110340 1112 4BA SCREWS BS WMSTEELHEXHEAD Hexagen head mildsteel BSWthreaded screws in accordance with BS 10831951

II NOMINAL DIA I LENGTH

39 I 250 NOS 1035240390 1114 I X 2

40 100 NOS 1035242680 34 X 2 Countersunk head mild steel BSFthreaded screws according to BS450-1952 NOMINAL DIA LENGTH

41 150 (Each box 1035260370 114 X 1 112 IONos) Nos

42 15 Each box 1035260610 516 X 1 112 IONos)

Nos

I Cheese(or round)head mild steel BSWthreaded screws in accordance with BS 450-1932 NOMINAL DlA LENGTH

43 100 NOS 1035270200 316 X 11 112

44 400 NOS 10220 316 X II 2

45 250 NOS 10370 114 X 1 112

46 200 NOS 0390 114

X 2 I

47 40 NOS I 0840 38 X 1 112 Countersunk head mild steel BSWthreaded screw in according to BS450-1952 NOMINAL DIA LENGTH

48 400 NOS 1035280330 114 X 112

I

I

NFthreaded screws HH bright mild steel according to ASAnoBI8 2-1935 table 5 thread to ASAnoB 1-1935 NOMINAL DIA I LENGTH

49 20 NOS 1035291040 716 X 34

50 150 NOS 1035291280 112 X 1 51 75 NOS 1035291940 58 X 2

3-7

IT aTY I UNIT VOCAB NO DESCRIPTION NC threaded screws of bright mild steel hexagon head according toASA noBl8 - 2-1935 table 5ampthreaded to ASAnoII-1935 NOMINAL DIA LENGTH

52 400 NOS 1035300350 114 X 1 53 150 NOS 0590 516 X 1 54 125 NOS 0630 516 I X 2 55 100 NOS 1280 112 I X 1

~

56 100 NOS 1400 112 X 4 57 100 NOS 1480 112 X 6

Hexagon head mild steel BSFthreaded screw according to BS1083-1951 NOMINAL DIA LENGTH

58 100 NOS 10353110390 114 X 2 59 50 NOS 0570 516 X 112 60 100 NOS 0630 516 X 2 61 60 NOS 1280 112 X 1 62 50 NOS 1320 112 X 2 63 30 NOS 1360 112 X 3

I Screw according to BS2470-1954 threaded UNCmaterial to be high tensile allenkey or similar quality NOMINAL DIA LENGTH

64 40 I NOS 1035400410 114 X 2112 65 150 NOS 0570 516 X 112 66 150 I

NOS 0610 516 X 1 112 67 200 NOS 0630 516 X 2 68 300 NOS 0820 38 X 1

69 150 NOS 0840 38 X 1 112

70 100 NOS 0880 38 X 2 112

71 10 NOS 3090 I 78 X 1

72 14 NOS 3550 I 1 X 1 112 UNC HEX SOCKET HEXAGON SOCKET SET SCREWS ACCORDING TO BS2470-1954 THREADED UNCMATERIAL TO BE HIGH TENSILE

I ALLENKEY OR SIMILAR QUALITY NOMINAL DIA LENGTH

73 75 NOS 10354111940 58 X 2

I 74 15 NOS 10354113130 I 78 I X 2 I

75 15 NOS 3570 1 I

X 2

[I

4-7

shy

~

IT QTY UNIT VOCAB NO DESCRIPTION SCREWS IN METRIC SYSTEM HEXAGONAL SOCKET SET SCREWS

SIZE LENGTH 76 500 NOS

I 1036252342 8m I

16mm

77 500 NOS 2860 10m 25mm

78 500 NOS 2880 lOx 35mm

i VNetbreaded stud of carbon steel to BS1750-1951 PT3 j material to BS 1506-101

NOMINAL DIA LENGTH

79 100 NOS 10401111960 58 X 2 112

Stud L7 threaded bar stock in accordance ASTMA 320-55T for low temp service in random lengths of6-10-Ft

DIAMETER 80 200 Ft 1040140090 58

UNCALLOY STEEL B7 STUD BOLTS THREADED FULL LENGTH(UNC)WITH TWO NUTSSTUD IN ACCORDANCE WITH BS1750shy

I 1951PTl ASTM A-193 GRADE B-7 AND STAMPED ON ONE END WITH B-7 NUTS IN ACCORDANCE WITH B-7 1750-1951PT2 GREAD 2HampSTAMP WITH SYMBOL 2H THREAD FITS2A AND 2B

I NOMINAL DIA LENGTH I I

81 2000 NOS 1040171020 38 X 6studamp2nuts

82 2000 NOS 2210 58 X 14Studamp2nuts

83 2000 NOS 2230 58 I

X 16 Studamp2nuts

84 8000 NOS 2780 34 X 4112 85 2000 NOS 2840 34 X 6 86 2000 NOS

I 3050 34 X 12Stud bolt B7

With two nuts 87 2000 NOS

I 3880 1 X 12Studamp2nuts 88 400 NOS 7500 16mm X

I

220mm stud bolt With two nuts

B-7 ALLOY STEEL I STUD BOLTS ALLOY STEEL FULL THREADED BAR UNC TEMPERED AT ItOOF TO ASTMA-193 GRADE B-7

I IN RANDOM LENGTH OF 6-10FT SIZE

89 500 FT 1040180080 112 90 500 FT 1040180140 78 91 1000 FT 0160 1Stud bar

VNC B7 92 15 FT 1040180220 1 38

5-7

IT QTY UNIT VOCAB NO DESCRIPTION Stud b14-threaded bar stock in accordance with BS1750shy1951PT1threaded IT 2Amaterial to BS1506-661 in random lengths of6-10 FT

DIAMETER

93 25 FT 1

1040190120 78

94 40 FT 1040190130 1

1

95 25 FT 1040190140 1 118

96 40 I

FT 1040190150 1 114

Bright mild steel washers flat heavy pattern for whitworth thread to BS1083-1951 SIZE LENGTH

97 1500 NOS 1045142040 114 100

98 150 NOS 1045142180 1 118 100 Galvanized mild steel flatwashers to BS 1494-951 Galvanized diamond shaped washers

I

SIZE LENGTH

99 750 NOS 1045150550 516 100 ID

I Spring washers single coil black square section in accordance with BS1802-1951 table 3type A

1 SIZE LENGTH

100 200 NOS I

1045300030 316 100 101 750 NOS I 0080 112 100 102 500 NOS 0100 58 100

(single coil square type A) metric single coil square section steel sparing washer

NOMINAL

103 2000 NOS 1046300082 m6

104 2000 NOS 0102 m10

6-7

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 9: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

IT aTY UNIT VOCAB NO DESCRIPTION Black metricstandard hexagonal nutsmaterial high tensile steel (NOMINAL DIAMM)

I SIZE 36 1250 NOS 1021100080 m6

Cheese head(or round head)brass screw BAthreaded according to BS75-1951

I SIZE I DIA LENGTH 37 I 100 NOS 1035200320 1 I 4BAishy

- Cheese head(or round head)brass screw BAthreaded according to BS57 -1951 NOMINAL DIA LENGTH

38 175 NOS 10352110340 1112 4BA SCREWS BS WMSTEELHEXHEAD Hexagen head mildsteel BSWthreaded screws in accordance with BS 10831951

II NOMINAL DIA I LENGTH

39 I 250 NOS 1035240390 1114 I X 2

40 100 NOS 1035242680 34 X 2 Countersunk head mild steel BSFthreaded screws according to BS450-1952 NOMINAL DIA LENGTH

41 150 (Each box 1035260370 114 X 1 112 IONos) Nos

42 15 Each box 1035260610 516 X 1 112 IONos)

Nos

I Cheese(or round)head mild steel BSWthreaded screws in accordance with BS 450-1932 NOMINAL DlA LENGTH

43 100 NOS 1035270200 316 X 11 112

44 400 NOS 10220 316 X II 2

45 250 NOS 10370 114 X 1 112

46 200 NOS 0390 114

X 2 I

47 40 NOS I 0840 38 X 1 112 Countersunk head mild steel BSWthreaded screw in according to BS450-1952 NOMINAL DIA LENGTH

48 400 NOS 1035280330 114 X 112

I

I

NFthreaded screws HH bright mild steel according to ASAnoBI8 2-1935 table 5 thread to ASAnoB 1-1935 NOMINAL DIA I LENGTH

49 20 NOS 1035291040 716 X 34

50 150 NOS 1035291280 112 X 1 51 75 NOS 1035291940 58 X 2

3-7

IT aTY I UNIT VOCAB NO DESCRIPTION NC threaded screws of bright mild steel hexagon head according toASA noBl8 - 2-1935 table 5ampthreaded to ASAnoII-1935 NOMINAL DIA LENGTH

52 400 NOS 1035300350 114 X 1 53 150 NOS 0590 516 X 1 54 125 NOS 0630 516 I X 2 55 100 NOS 1280 112 I X 1

~

56 100 NOS 1400 112 X 4 57 100 NOS 1480 112 X 6

Hexagon head mild steel BSFthreaded screw according to BS1083-1951 NOMINAL DIA LENGTH

58 100 NOS 10353110390 114 X 2 59 50 NOS 0570 516 X 112 60 100 NOS 0630 516 X 2 61 60 NOS 1280 112 X 1 62 50 NOS 1320 112 X 2 63 30 NOS 1360 112 X 3

I Screw according to BS2470-1954 threaded UNCmaterial to be high tensile allenkey or similar quality NOMINAL DIA LENGTH

64 40 I NOS 1035400410 114 X 2112 65 150 NOS 0570 516 X 112 66 150 I

NOS 0610 516 X 1 112 67 200 NOS 0630 516 X 2 68 300 NOS 0820 38 X 1

69 150 NOS 0840 38 X 1 112

70 100 NOS 0880 38 X 2 112

71 10 NOS 3090 I 78 X 1

72 14 NOS 3550 I 1 X 1 112 UNC HEX SOCKET HEXAGON SOCKET SET SCREWS ACCORDING TO BS2470-1954 THREADED UNCMATERIAL TO BE HIGH TENSILE

I ALLENKEY OR SIMILAR QUALITY NOMINAL DIA LENGTH

73 75 NOS 10354111940 58 X 2

I 74 15 NOS 10354113130 I 78 I X 2 I

75 15 NOS 3570 1 I

X 2

[I

4-7

shy

~

IT QTY UNIT VOCAB NO DESCRIPTION SCREWS IN METRIC SYSTEM HEXAGONAL SOCKET SET SCREWS

SIZE LENGTH 76 500 NOS

I 1036252342 8m I

16mm

77 500 NOS 2860 10m 25mm

78 500 NOS 2880 lOx 35mm

i VNetbreaded stud of carbon steel to BS1750-1951 PT3 j material to BS 1506-101

NOMINAL DIA LENGTH

79 100 NOS 10401111960 58 X 2 112

Stud L7 threaded bar stock in accordance ASTMA 320-55T for low temp service in random lengths of6-10-Ft

DIAMETER 80 200 Ft 1040140090 58

UNCALLOY STEEL B7 STUD BOLTS THREADED FULL LENGTH(UNC)WITH TWO NUTSSTUD IN ACCORDANCE WITH BS1750shy

I 1951PTl ASTM A-193 GRADE B-7 AND STAMPED ON ONE END WITH B-7 NUTS IN ACCORDANCE WITH B-7 1750-1951PT2 GREAD 2HampSTAMP WITH SYMBOL 2H THREAD FITS2A AND 2B

I NOMINAL DIA LENGTH I I

81 2000 NOS 1040171020 38 X 6studamp2nuts

82 2000 NOS 2210 58 X 14Studamp2nuts

83 2000 NOS 2230 58 I

X 16 Studamp2nuts

84 8000 NOS 2780 34 X 4112 85 2000 NOS 2840 34 X 6 86 2000 NOS

I 3050 34 X 12Stud bolt B7

With two nuts 87 2000 NOS

I 3880 1 X 12Studamp2nuts 88 400 NOS 7500 16mm X

I

220mm stud bolt With two nuts

B-7 ALLOY STEEL I STUD BOLTS ALLOY STEEL FULL THREADED BAR UNC TEMPERED AT ItOOF TO ASTMA-193 GRADE B-7

I IN RANDOM LENGTH OF 6-10FT SIZE

89 500 FT 1040180080 112 90 500 FT 1040180140 78 91 1000 FT 0160 1Stud bar

VNC B7 92 15 FT 1040180220 1 38

5-7

IT QTY UNIT VOCAB NO DESCRIPTION Stud b14-threaded bar stock in accordance with BS1750shy1951PT1threaded IT 2Amaterial to BS1506-661 in random lengths of6-10 FT

DIAMETER

93 25 FT 1

1040190120 78

94 40 FT 1040190130 1

1

95 25 FT 1040190140 1 118

96 40 I

FT 1040190150 1 114

Bright mild steel washers flat heavy pattern for whitworth thread to BS1083-1951 SIZE LENGTH

97 1500 NOS 1045142040 114 100

98 150 NOS 1045142180 1 118 100 Galvanized mild steel flatwashers to BS 1494-951 Galvanized diamond shaped washers

I

SIZE LENGTH

99 750 NOS 1045150550 516 100 ID

I Spring washers single coil black square section in accordance with BS1802-1951 table 3type A

1 SIZE LENGTH

100 200 NOS I

1045300030 316 100 101 750 NOS I 0080 112 100 102 500 NOS 0100 58 100

(single coil square type A) metric single coil square section steel sparing washer

NOMINAL

103 2000 NOS 1046300082 m6

104 2000 NOS 0102 m10

6-7

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 10: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

IT aTY I UNIT VOCAB NO DESCRIPTION NC threaded screws of bright mild steel hexagon head according toASA noBl8 - 2-1935 table 5ampthreaded to ASAnoII-1935 NOMINAL DIA LENGTH

52 400 NOS 1035300350 114 X 1 53 150 NOS 0590 516 X 1 54 125 NOS 0630 516 I X 2 55 100 NOS 1280 112 I X 1

~

56 100 NOS 1400 112 X 4 57 100 NOS 1480 112 X 6

Hexagon head mild steel BSFthreaded screw according to BS1083-1951 NOMINAL DIA LENGTH

58 100 NOS 10353110390 114 X 2 59 50 NOS 0570 516 X 112 60 100 NOS 0630 516 X 2 61 60 NOS 1280 112 X 1 62 50 NOS 1320 112 X 2 63 30 NOS 1360 112 X 3

I Screw according to BS2470-1954 threaded UNCmaterial to be high tensile allenkey or similar quality NOMINAL DIA LENGTH

64 40 I NOS 1035400410 114 X 2112 65 150 NOS 0570 516 X 112 66 150 I

NOS 0610 516 X 1 112 67 200 NOS 0630 516 X 2 68 300 NOS 0820 38 X 1

69 150 NOS 0840 38 X 1 112

70 100 NOS 0880 38 X 2 112

71 10 NOS 3090 I 78 X 1

72 14 NOS 3550 I 1 X 1 112 UNC HEX SOCKET HEXAGON SOCKET SET SCREWS ACCORDING TO BS2470-1954 THREADED UNCMATERIAL TO BE HIGH TENSILE

I ALLENKEY OR SIMILAR QUALITY NOMINAL DIA LENGTH

73 75 NOS 10354111940 58 X 2

I 74 15 NOS 10354113130 I 78 I X 2 I

75 15 NOS 3570 1 I

X 2

[I

4-7

shy

~

IT QTY UNIT VOCAB NO DESCRIPTION SCREWS IN METRIC SYSTEM HEXAGONAL SOCKET SET SCREWS

SIZE LENGTH 76 500 NOS

I 1036252342 8m I

16mm

77 500 NOS 2860 10m 25mm

78 500 NOS 2880 lOx 35mm

i VNetbreaded stud of carbon steel to BS1750-1951 PT3 j material to BS 1506-101

NOMINAL DIA LENGTH

79 100 NOS 10401111960 58 X 2 112

Stud L7 threaded bar stock in accordance ASTMA 320-55T for low temp service in random lengths of6-10-Ft

DIAMETER 80 200 Ft 1040140090 58

UNCALLOY STEEL B7 STUD BOLTS THREADED FULL LENGTH(UNC)WITH TWO NUTSSTUD IN ACCORDANCE WITH BS1750shy

I 1951PTl ASTM A-193 GRADE B-7 AND STAMPED ON ONE END WITH B-7 NUTS IN ACCORDANCE WITH B-7 1750-1951PT2 GREAD 2HampSTAMP WITH SYMBOL 2H THREAD FITS2A AND 2B

I NOMINAL DIA LENGTH I I

81 2000 NOS 1040171020 38 X 6studamp2nuts

82 2000 NOS 2210 58 X 14Studamp2nuts

83 2000 NOS 2230 58 I

X 16 Studamp2nuts

84 8000 NOS 2780 34 X 4112 85 2000 NOS 2840 34 X 6 86 2000 NOS

I 3050 34 X 12Stud bolt B7

With two nuts 87 2000 NOS

I 3880 1 X 12Studamp2nuts 88 400 NOS 7500 16mm X

I

220mm stud bolt With two nuts

B-7 ALLOY STEEL I STUD BOLTS ALLOY STEEL FULL THREADED BAR UNC TEMPERED AT ItOOF TO ASTMA-193 GRADE B-7

I IN RANDOM LENGTH OF 6-10FT SIZE

89 500 FT 1040180080 112 90 500 FT 1040180140 78 91 1000 FT 0160 1Stud bar

VNC B7 92 15 FT 1040180220 1 38

5-7

IT QTY UNIT VOCAB NO DESCRIPTION Stud b14-threaded bar stock in accordance with BS1750shy1951PT1threaded IT 2Amaterial to BS1506-661 in random lengths of6-10 FT

DIAMETER

93 25 FT 1

1040190120 78

94 40 FT 1040190130 1

1

95 25 FT 1040190140 1 118

96 40 I

FT 1040190150 1 114

Bright mild steel washers flat heavy pattern for whitworth thread to BS1083-1951 SIZE LENGTH

97 1500 NOS 1045142040 114 100

98 150 NOS 1045142180 1 118 100 Galvanized mild steel flatwashers to BS 1494-951 Galvanized diamond shaped washers

I

SIZE LENGTH

99 750 NOS 1045150550 516 100 ID

I Spring washers single coil black square section in accordance with BS1802-1951 table 3type A

1 SIZE LENGTH

100 200 NOS I

1045300030 316 100 101 750 NOS I 0080 112 100 102 500 NOS 0100 58 100

(single coil square type A) metric single coil square section steel sparing washer

NOMINAL

103 2000 NOS 1046300082 m6

104 2000 NOS 0102 m10

6-7

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 11: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

shy

~

IT QTY UNIT VOCAB NO DESCRIPTION SCREWS IN METRIC SYSTEM HEXAGONAL SOCKET SET SCREWS

SIZE LENGTH 76 500 NOS

I 1036252342 8m I

16mm

77 500 NOS 2860 10m 25mm

78 500 NOS 2880 lOx 35mm

i VNetbreaded stud of carbon steel to BS1750-1951 PT3 j material to BS 1506-101

NOMINAL DIA LENGTH

79 100 NOS 10401111960 58 X 2 112

Stud L7 threaded bar stock in accordance ASTMA 320-55T for low temp service in random lengths of6-10-Ft

DIAMETER 80 200 Ft 1040140090 58

UNCALLOY STEEL B7 STUD BOLTS THREADED FULL LENGTH(UNC)WITH TWO NUTSSTUD IN ACCORDANCE WITH BS1750shy

I 1951PTl ASTM A-193 GRADE B-7 AND STAMPED ON ONE END WITH B-7 NUTS IN ACCORDANCE WITH B-7 1750-1951PT2 GREAD 2HampSTAMP WITH SYMBOL 2H THREAD FITS2A AND 2B

I NOMINAL DIA LENGTH I I

81 2000 NOS 1040171020 38 X 6studamp2nuts

82 2000 NOS 2210 58 X 14Studamp2nuts

83 2000 NOS 2230 58 I

X 16 Studamp2nuts

84 8000 NOS 2780 34 X 4112 85 2000 NOS 2840 34 X 6 86 2000 NOS

I 3050 34 X 12Stud bolt B7

With two nuts 87 2000 NOS

I 3880 1 X 12Studamp2nuts 88 400 NOS 7500 16mm X

I

220mm stud bolt With two nuts

B-7 ALLOY STEEL I STUD BOLTS ALLOY STEEL FULL THREADED BAR UNC TEMPERED AT ItOOF TO ASTMA-193 GRADE B-7

I IN RANDOM LENGTH OF 6-10FT SIZE

89 500 FT 1040180080 112 90 500 FT 1040180140 78 91 1000 FT 0160 1Stud bar

VNC B7 92 15 FT 1040180220 1 38

5-7

IT QTY UNIT VOCAB NO DESCRIPTION Stud b14-threaded bar stock in accordance with BS1750shy1951PT1threaded IT 2Amaterial to BS1506-661 in random lengths of6-10 FT

DIAMETER

93 25 FT 1

1040190120 78

94 40 FT 1040190130 1

1

95 25 FT 1040190140 1 118

96 40 I

FT 1040190150 1 114

Bright mild steel washers flat heavy pattern for whitworth thread to BS1083-1951 SIZE LENGTH

97 1500 NOS 1045142040 114 100

98 150 NOS 1045142180 1 118 100 Galvanized mild steel flatwashers to BS 1494-951 Galvanized diamond shaped washers

I

SIZE LENGTH

99 750 NOS 1045150550 516 100 ID

I Spring washers single coil black square section in accordance with BS1802-1951 table 3type A

1 SIZE LENGTH

100 200 NOS I

1045300030 316 100 101 750 NOS I 0080 112 100 102 500 NOS 0100 58 100

(single coil square type A) metric single coil square section steel sparing washer

NOMINAL

103 2000 NOS 1046300082 m6

104 2000 NOS 0102 m10

6-7

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 12: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

IT QTY UNIT VOCAB NO DESCRIPTION Stud b14-threaded bar stock in accordance with BS1750shy1951PT1threaded IT 2Amaterial to BS1506-661 in random lengths of6-10 FT

DIAMETER

93 25 FT 1

1040190120 78

94 40 FT 1040190130 1

1

95 25 FT 1040190140 1 118

96 40 I

FT 1040190150 1 114

Bright mild steel washers flat heavy pattern for whitworth thread to BS1083-1951 SIZE LENGTH

97 1500 NOS 1045142040 114 100

98 150 NOS 1045142180 1 118 100 Galvanized mild steel flatwashers to BS 1494-951 Galvanized diamond shaped washers

I

SIZE LENGTH

99 750 NOS 1045150550 516 100 ID

I Spring washers single coil black square section in accordance with BS1802-1951 table 3type A

1 SIZE LENGTH

100 200 NOS I

1045300030 316 100 101 750 NOS I 0080 112 100 102 500 NOS 0100 58 100

(single coil square type A) metric single coil square section steel sparing washer

NOMINAL

103 2000 NOS 1046300082 m6

104 2000 NOS 0102 m10

6-7

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 13: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

Origin America Canada India South Korea Europe Japan DELIVER TIME( 120 DAYS)

CERTIFICATE OF ORIGIN MILL CERTIFICATE DIMENSIONS CHECH THIRD PARTY INSPECTION CERTIFICATE ( CHEMICAL COMPOSITION AND D1MENSION TEST)

1 Lioyds Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV

PACKING EXPORT WOODEN BOX SUITABLE FOR OUTDOOR STORAGE

7-7

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 14: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12822018 INSTRUMENT amp METERS INDUSTRIAL COMPUTER ATMOSPHERIC DIST UNIT (70000 BBLD)

2 ITEMS 60000 $ TWICE 1800 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 15: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 16: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

REQNO 12822018

IT QTY UNIT VOCABNO DESCRIPTION

INSTRUMENT amp METER TYPE INDUSTRIAL COMPUTER

-

1

-

2

6

6

NOS

NOS

3697230503

3697230513

ATMOSPHERIC DIST UNIT(70000 BBLID) FUJITSU INDUSTRIAL DESK TOP PC (WORKSTATION) WITH THE FOLLOWING SPECIFICATION MODEL MCS-02178 PIN ABNK990-VI15-3061 PROCESSOR MIN 20GHZ (DUAL CORE OR XEON) MEMORY 2GB MIN HDDMIN 250 GB MIRROR (RAID 1) SATA FDDNO OPTICAL DRIVE DVD-RAM PCI BUS FOR V-NET VIDEO ADAPTER MIN 1280XI024 DUAL HEAD 4 x USB PORT ETHERNET PORT POWER (l00-240)V AC 50 HZ INDUSTRIAL LCD MONITOR 20 POWER (100-240) VAC 50 HZ

CERTIFICATE OF ORIGIN THIRD PARTY INSPECTION CERTIFICATE ( Visual test ) 1Lloyd s Register 2 Bureau Veritas 3 Intertek Global 4 TUV Rhenland 5 DNV ORIGIN EUROPE UNION - JAPAN - USA- Australia - Canada _ South Korea

DELIVER 90 DAYS PACKAGING METHOD CARTOON BOX WARRANTY 12 MONTHES FROM DILIVERY

1 - 1

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 17: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

12852018 PIPE FITTING 28 ITEMS 79156 $ ONCE 2350 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 18: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 19: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

REONO 12852018

IT QTY UNIT VOCAB NO DESCRIPTION-PIPE amp FiniNG Pipe seamless alloy steel ( 125 CHR + 112 MO )

material conforming to ASTM (A335GR P 11)

dimension according to ANSI ( B 3610 ) butt weld ends the ends bevelld To ansi (B 1625 ) insid amp outside of

the pipe protected against rust black inside amp oiled out side with two beveled ends protector length ( 6 OR 12 MTS)

1 96 MTS 0102373210 20 Pipe seamless alloy steel ( 9 CHR + 1 MO ) material conforming to ASTM ( A 335 GR P 9) dimension according to ANSI (B 3610) Butt weld ends the ends bevelld to ANSI ( B 1625 ) insid amp outsid of the pipe protected against rust black inside amp oiled outside with two Beveled (rotector length ( 6 OR 12 MTS )

2 222 MTS 0102496080 2 Malleabl coupling screwed rating 300 Ibs malleable iron black for temperature up to (550 F 0 ) conforming to astm (338) and thread to ansi B (1201)

3 120 NOS 2206040242 Y2 300 LBS 4 120 NOS 0252 04 300 LBS 5 40 NOS 0262 1 300 LBS 6 14 NOS 0282 1Yz 300 LBS

COUPLING REDUCING CONCENTRIC 300 LBS MALLEABLE IRON BLACK FOR TEMPERATURE UP TO (550F) CONFIRM TO ASTM (A 338) THREAD TO ANSI

(B1201) 7 60 NOS 12102 04XYz 8 60 NOS 2142 1XY2 9 15 NOS 2152 1 X 04

I STREET ELBOW (90deg) BANDED Malleable Iron Black

I RATING (300 LBS) FOR TEMPERATURE UP TO (550FO) CONFIRM TO ASTM (A 338)THREAD TO ANSI (B1201 )

I 10 40 NOS 2206060642 Y2 300 Coupling Rating 3000 Lbs For Cold Service To Astm

(A 350 Gr LF1 ) Socket Welding (S W) Ends To ANSI (B I

1611) I

12 15 NOS 2212241042 Y2 13 15 NOS 1052 04

COUPLING 3000 LBS SCREWED TO API STD THREAD FORGED ALLOY STEEL 5 CHROME PLUS 12 MO CONFORMING TO ASTM A-182 GR F5

14 22 NOS 2216041042 Y2

1-3

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 20: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

IT QTY UNIT VOCAB NO DESCRIPTION 15 18 NOS 2216041052 34 I 16 18 NOS 1062 1 17 14 NOS 1082 1

plug aHoy steel 5 CR conforming to Astm A 182 GR F5

I 18 18 NOS 2216051452 3000 ELBOW 3000 LBS FORGED ALLOY STEEL( 5 CHR amp 112 MO) CONFORMING TO ASTM A-182 GR F5 screwed to ansi(B1201)

19 10 NOS 2216061882 2 ELBOW 45deg ALLOY STEEL ELBOW 90deg ( LR ) SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 234 WP 11 ) SEAMLESS BUTT WELD ENDS TO ANSI ( B 169 )

20 8 NOS 2224061022 20 ALLOY STEEL ELBOW 90deg ( LR ) SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM (A 234 WP 9 ) SEAMLESS i

BUTT WELD ENDS TO ANSI ( B 169 ) 21 I 8 NOS 2228065092 2

ALLOY STEEL (WNRTJ ) FLANGE RATING 600 LBS

I SCH 30 ( 125 CR + 05 MO) MATERIAL TO ASTM ( A 182 F11 ) THE ENDS OF THE FLANGE TO ANSI

I 22 ( B 165 )

6 NOS 2245071822 20 FLANGE RAISED FASE (RF) WELDING NECK (WN) RATING (150 LBS) MATERIAL ALLOY STEEL (5CR + 05 MO)CONFORMING TO ASTM ( A- 182 GRADE F5) AND ANSI(B165)SCH(40)

23 20 NOS 2247052182 12 FLANGE WELDING NECK TYPE (WNRF) SCH (40) RATING 300 LBS FORGED ALLOY STEEL (5 CHR +112 MO) CONFORMING TO ASTM (A-182GRF5) FACED amp DRILLED TO ANSI (B165)

24 8 NOS 2247062082 1 25 20 NOS 2247062092 2

FLANGES (SWRF) RATING 600 LBS MATERIAL ALLOY STEEL (5 CHR amp12 MO) TO ASTM (A-182 F5) FACE amp DRILLED TO ANSI (B165)

I 26 10 NOS 2247071252 34

ALLOY STEEL (WNRF) FLANGE RATING 300 LBS SCH 80 ( 9 CR + 1 MO) MATERIAL TO ASTM ( A 182 F9 ) THE ENDS OF THE FLANGE TO ANSI (B165)

27 8 NOS 2248064092 2

I

I

2-3

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 21: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

10 TYPE WP 321

ORIGIN D- SOUTH ngtIr lt=

(

4-TUVRHENIAND 5-DNV

Packagingcovered for nylon in wooding box

one year from materials to acompany

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 22: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

MINISTRY OF OIL MIDLAND REFINERIES CO (GCO)

(DAURA REFINERY) ADVERTISMENT

MIDLAND REFINERIES CO ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELOW- REQNO DESCRIPTION QTY ESTIMATED

COST ADVERTISMENT

NO BID

BOND

35062018 3- PHASE INDUCTION MOTOR 84 HP 3- PHASE INDUCTION MOTOR 75375 HP

2 NOS 1 NOS

50000 $ TWICE 1500 $

1-The requisition to be sold in (250 000) Iraqi dinars un returnable or to transfer this amount to MRC Bank account number (90956)in Rafidan Bank head branch 2-Technical and commercial offer should be opened at the same time the representatives of the companies can be attend to our company (MRC) at 10 orsquoclock morning one day after the closing day stated below in item (29) 3-Offered prices should be (CIP) Baghdad Daura Refinery WAREHOUSE and preferred to be in us dollar they will be

final and nonnegotiable (MRC) is not obliged to accept the lowest prices 4- offeres (TECHNICAL amp COMMERCIAL) to be submitted separately in sealed envelopes either directly at (MRC) reception bureau or sent by (DHL) the requisition number the description and the closing date should be fixed on both envelopes the validity of the offer should be mentioned within the technical offer also on the envelope of the commercial offer offers sent by endash mail will be neglected 5- The validity of the bid bond and the offer should be mentioned within both offers and should not be less than (120) days 6- All pages of both the technical and commercial offers should be numbered in sequence including the attachments and documents 7-All documents (profile) (new establishment certificate stamped from the Iraqi embassy in your country financial statement accounts for the last two year (balance sheet ) exemption letter issued from general commission for tax contain the taxes number and similar contracts achieved issued by concerned contracting sides enclosed with the technical offer before purchasing the requisition 8- A BID BOND SHOULD BE SUBMITTED WITH THE OFFERS FROM WHO SUBMIT THE OFFER OR ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS(LETTER OF GUARANTEE CERTIFIED CHEQUE OR BILL OF EXCHANGE ) (ORIGINAL COPY) ISSUED FROM (( HUDA BANK TRADE BANK OF IRAQ KURDISTAN INTERNATIONAL BANK FOR INVESTMENT AND DEVELOPMENT ERBIL BANK CIHAN BANK FOR ISLAMIC INVESTMENT AND FINANCE NATIONAL ISLAMIC BANK MANSOUR BANK FOR INVESTMENT REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFORE) BANK OF BAGHDAD GULF COMMERCIAL BANK SUMER COMMERCIAL BANK CREDIT BANK OF IRAQ NATIONAL BANK OF IRAQ INVESTMENT BANK OF IRAQ ASHUR INTERNATIONAL BANK FOR INVESTMENT IRAQI ISLAMIC BANK FOR INVESTMENT AND DEVELOPMENT INTERNATIONAL DEVELOPMENT BANK INVESTMENT AND FINANCE COMMERCIAL BANK OF IRAQ BYBLOS BANK IRAQ IMDLEST BANK OF INVESTMENT BANK MED UNITED BANK FOR INVESTMENT )) AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED OFFERS WITHOUT BID BOND WILL BE NEGLECTED BID BOND ISSUED FROM ((ASIA BANK DAR ESSALAAM INVESTMENT BANK NORTH BANK FOR FINANCIAL AND INVESTMENT DIJLAH AND FURAT BANK WARKA BANK FOR INVESTMENT amp FINANCE THE BANK OF BASRAH INTERNATIONAL AL- RAWAHIL ISLAMIC BANK ECONOMY FOR INVESTMENT AND FINANCE ALBILAD ISLAMIC BANK FOR INVESTMENT AND FINANCE UNION BANK OF IRAQ ) ARE NOT ACCEPTABLE THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN ( 120) DAYS OFFERS WITH SWIFT WILL BE NEGLECTED

9- the delivery period (in days) should be exactly specified 10- Basic terms of payment is by irrevocable amp unconfirmed letter of credit to be paid (100) after the receipt of goods in baghdad complete and as ordered other terms of payment may be mutually agreed upon later and for certain conditions which are a portion of the total amount to be paid but against bank guarantee the prices of all offers are calculated according to the exchange rate of the central bank of iraq at the date of opening the offers for the purpose

of preferability and by iraqi dinar only for iraqi companies according to the exchange rate of the central bank of iraq at the date of preparing the contractand the cost was stated in the contract 11- Delay penalty to be applied with total amount not exceeding (10) of the total value of the contract 12- An unconditional performance bond of (5) of the total value of the contract to be submitted from one of the participant in the company as a letter of guarantee (only) after the letter of award and before signing the contract according to instruction from one of the banks mentioned in item (8) within (14) fourteen days from the date the supplier is informed of the award for any delay beyond the specified period the award will be cancelled and the supplier will be considered as a shirker the performance bond should be valid throughout the period of the contract or extending it upon extending the period of supply or until the guarantee period (if stated) is over this performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the contract otherwise it will be confiscated by our company

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 23: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

I

1~middot (27) of the total value of the contract to be deducted as taxes for iraqi companies also in case the payment is in iraqi dinar for non-iraqi companies the deducted amounts shall be transferred to the general commission of taxes within a period not exceeding (30) days from the date of completing the work and 3 for the contract contain onsite training installation and operation not to pay the final payment to the second party and not to settle the final account unless after a written approval issued by the general commission for taxes or deducting a percentage of 10 from it and sent it to the general commission for taxes before the release the final payment whether the contract execution is in one payment or in multiple payments 14- (0003) off the total value of the contract to be deducted as stamp charges 15- a sum of money will be deducted after issuing the contract according to what be determined by minist for chemical requisition of trade (state company for Iraqi fairs and commercial services ) 16- Origin certificate should be submitted insurance certificate commercial invoices on the company format (suppliers) approved by iraqi embassycommercial attache in the country of origin 17- a sum of money in Iraqi dinar for chemical materials to be deducted as an environmental cost for chemica ten after issuing the contract amp will be determined by ministry of environment ( for chemical materials only) 18- The partiCipant has no right to omit or make any amendment whatsoever to any of the paragraphs of the requisition document 19- The origin ofthe materials should be specified in the offer and fixed and will not be changed for any reason and should be from the requested origin State the method amp the port of shipment amp the entry pOint 20- The supplier should state his full and fixed name and address (Country City Street Building Email Phone NO) ALL offers and correspondences should be clearly signed by the general manager or whom is officially empowered via power of attorney otherwise the offer will be neglected 21- Third party inspection certificate should be provided from one of the following companies [LIOYDS REGISTER - INTERTEK GLOBAL - TUV RHEINLAND - DNV- ATG - SGS] 22- It is necessary to present authorization letter from the manufacturer companies certified from ministry of foreign affairs or embassy or consulate or the commercial attached in country of origin ( original copy) (for tenders of specific materials) 23- The awarded supplier will bear the advertising fees value (150 $) bull 24- Iraqi laws are applied the tender and the contract shall be governed and construed according to the iraqi laW courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract governmental debts collection law (no 56) for the year 1977 shall be applied on amounts owed to (MRC) 25- For chemical (Req) the sample should be submitted with the technical amp commercial offers before or (during )the closing otherwise the offers will be neglected 26- The contracted company shall not deal with Israel in any way otherwise it shall bear all the legal consequences 27-The companies that need any additional information in order to participate in any tender should buy the tender document amp attached with their letters before closing date amp our company shall state a date of conference for answering all questions in time not less than (7 day) before closing date 28- In case of Receiving tl1e Shipping Documents Incompatible to the contract and UC Conditions the

Materials will consider Incompatible to our Specifications 29- Closing date 17 9 2018 till (100) oclock (afternoon) 30- All the procedure of the requirements governed by implementing Instructions of government contract No2 for the Year 2014 regulations and its amendments Note you can find all specification of tenders and the conditions of submitting offers on website wwwoilgovig - wwwmrc oilgovig ~ ~l-

J C) bull Z ~ 01 Y ZAID KSHARIF GMANAGER

infomrcoilgov-iltL l 31)loo l1j~J JfoN1 -YIl purchasemrcoil govig

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 24: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

REQ NO 35062018

Qty no

description unitItem

3-phase induction motor 84 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55B5 mounting insulation classtemp rise FB ambient

1

2 temp 55CO

Nos

2 1Nos 3-phase induction motor 75375 HP 1500750 RPM 380V 50HZ EXDeIICT4 with IP 55V3 mounting insulation classtemp rise F B ambient temp 55CO

I

Manufacture-Germany- France - Italy -UK - Finland

Note- The dimensions for the above two items should be as the drawings attached l-Certificate of origin 2-Mill certificate 3- Delivery period (150 days) 4-Third party inspection certificate witnesstest bull Lloyds Register bull Bureau Veritas bull Intertek Global bull TUV Rhenland DNV

PACKING THE MANUFACTURE IS RESPONSIBLE FOR PACKING METHOD

12 - 1

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 25: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

f~ -=J 1 ~---__(D-- ---

----------~

middot BY OL R

eKED HOWE-BAKER ENGINEERS INCbull

SPECIFICATION SHEET 0

E i 20-79 IREVISION DATEA I- ~-14--n middotIBmiddotImiddotmiddot l O R TO COMfHE All INFORMATION MAUft)

ES~~T~~ESSURE -middot---pSIGshy-shy=8--0--------t

OP[imiddotTfNG TEMPERA1URE middotF 42 E iIQWD SPECIfiC GRAVlrY 0 9 0

CONTENTS LETHAL YES (N

DESiGN PRESSURE PSIG C 0 -4lS J)ltO DESIGN TEMPERATURE ~ Goo rt 500 0 ~ctd

~~t l PRESS (COLD amp NEW) PSIC

liM l1 ED BY

HYDROSTATIC TEST PSIG y~S~H~E~ll~J~H~E~A~D~S~C~0~R~R--Al-l~O-W~ -~IN~~-~~16 ~-~I---rr~~----~ SH Ell J HEAOS JOINT Efr II CO DE ASME Sec YII D~ I SlAMP (YE~ NO

~OGRAPH S POT IE ~4 b ~ 51RfSS RELIEV YE5 r NATIONAL 60ARD NO

IN 5Ul0N Y ~54-=tV-t-l=-=~__-- shy __TYPE~SUP~PORT~SLI csS-_--t REPROOFING I-Jo

SANDLAST

MANHOLE (HINGEigt DAvino

flATfOfZM CLJS I LADDER CLIPS

I PIPE SUPPORTS

middotWIND LOAD

WI EMPTY LB

OTHER

I INSUL NOS Rc I

S~ISMc

WT fULL

MA TERtAl=---r===T=------------= =---j TEM THICKNESS MAfL CLASS MATt- MINIMUM QUALITY

TSlmL IN L 5 SA - sIS C -1 sA-1166rl HEADs 1 IN C gt U N ING I IN

IN C5 i IN

I NOI~lf NECKS

flANGES cs COUPLI N G I C5

SOLTSSTUDS

NUTS

GASKETS

NOZZlE SCHEDULE

SERVCE MARll NO SIZ~ ATlNG bull FACE TYpe

Herr ch A 3 50 R= WI- lo-r () C rT B ~ n 1=1lt= liN

3 CO fllt= NshypoundCJ 1ltlt= -1 150 B - INhL

11=1 ~ R EcycltE F ~ SO RI=shy IN 300 FFshy w

VAC M H 0 1gt1=shy I 314 16000 CPL

I=- IT K ~4- cooo rp ToC-XampT f) L I 7shy 30012 CCPl MA AV M P 0 RFshy 5p~c

A rlDITI [ T_ N L J 3()0 Rlt= PROD CT () rT P 4shy 50 RFshy Wshy

GOOo CPL

middotIe l MEET I

tog No IV-ZoO I A 4-B

6RE=A52

Cot-JA C TO R S

Of

2

~reg--)f~t--lt

-1-- - -I-shy -

reg

bull NOllle TO SE PLUGGED O BLINDED I fOR FURTHER DETAILS seE SHEET NO

12 - 2

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 26: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

i

c

-~

I ~~ I~

shy

I -

imiddot

_ 1

J~~[li~liJil --

12 - 3

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 27: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

i I J

1shy

I ~ bull - gt id i 3shy I~ ~ ifi ~~ 1 ~ ~ IH q~ Slg ~i il~~ 1~

i

reg---shy~ ~ - -- --~--

HtP6ji11 iii I f 0

- --- shy ()

---- --~ -- ~- - shy--- ---- - --~ -

------shy ----shy -- ~

-------~~ 1+t-----------~

-------1shyI ~ j ~

~

~

12 - 4

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 28: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

-5

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 29: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

---- - --~- r~

I O~ ImiddotJJNG TRArJStgtUiT tL

FOAM lnlC j lt ~ ~ ~ - reg Westinghouse Electric Corporation~~ 0(

- v-l lt gtlt~ (( Nr IA~_ r-] fU4CON5TRUL-0r~ II 58 KC-J 1898 MG l co NTLlA~CN W

reI~~ 1

Ilt Js T E~ STRPTFr)RDGRAHAM ENGRG CORP STRATFORD - GRPHAM HIGRG 4520 MADISON AVE SAil J0SE CAL 95112~ r~NSAS CITY Mn 64111

v SZ 24 HEAD 572 JOB 50G10

r-F5CH IPT ON ITE~~ SO 79(60360

~~~ _~OtR~~~~~_~_ -=~[_~2~~Cl ) [~J=c_-=-~-~~ll1_=-==~rI middotmiddotn ~lt 75i37 5 1465 7 35 = 445fDZ T f ltr U

Imiddot middot 3 I ~ 50 380 10484A

-~~ W- 10 ~ middot-middot 115 727431J

~~~=~ ~~I 0 _ [D I c r~~[J ~~~~~~~~_=1 ~ ~~~D ~ umiddot 0 cr CJ 0 [] D rmiddotD

1 r 0 CJ d ~ I -- L ~-~--- I-J 0 -=~~J=~~==- l_~=== ~~ ~ - s middot (1 ~~ rs

none

ID

N -I

1 r-J i 1 middot~~ PH~rmiddot middot~

1 nonei~ middotmiddot~)~ l~r~ ~~~ s J

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 30: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

_ ~c shy(~ 1 ~bull

~ 1

II A I bull

I

I

I

1 bull

i bull rmiddot bull bull tf-

12 -7

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 31: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

I

West inghouse Electr ic Corporation In struct ion Leaflet Medium Motor and Gearing D ivis ion 2930-1lTE Bu ffalo New y ot)t U S A 14240

May 1978 Installation and Maintenance Instructions Supersedos IL 2930middot lTD For UfcmiddotLinc T Motor Frames 143T-449T Medium Ac Motors dated July 1976

~ ----------------------------------------------------------------------------------------------------------------------

Receiving

Check Namep late Data

2 Turn shaft by hzmd to check that it turns freely

3 Requost Receiving ond Storage InstruCshytions fOT long-term storage indoors or amy storage olltdoors

4 Ufting eyebolts are des igned for raising the motor alone and should be removed her Installing motor

WARNING The following safety prcc8utions must bo obserVed

1 Electric rotating machinery and high voltage can cause se ri ous or fatal injury it imshyproperly insta led operated or maintained Responsible personnel shoul d be familiarized with NEMA MG2 slIfety standards for con shystruction end gu ide for selection installatIon and use of electric motors and generators n8 shytionlll electric code ~nd alilocat safety remiddot quirements

2 When scrvicillO all power sources to the motor and to the accessory devices amphould be de-energized and disconnected end II rotatshying pans should be at slandstill

3 Lihlng means when supplied a r e Inshytended for lift ing the motor only When tvo lifting devices ilre supplied w it h the motor a dual chain must be usetL

4 Suitable p rotec l ion must be used when working noar machinery with high nols8 levels

S Safeguard or protective dovlces must not be by-passed or rendered inoporative

6 The frame of this machine must be grounded in accordance with the Nationa l Electrlcar Code and applicable loc al codes

7 Avoid contact with start or run capacitors in single-phase motors until a safe discharge procedu re hilS been followed

8 A suitab le enctosure should be provided to prevsnt DCCess to the motor by other th an authorized personnel EKt ra caution should be observed around motors that ore automatshyically centrolled or havo automatic re-sening relays as th ey may restan uno)(poctedly

9 Enclose a U be lls to p reven t injury from broken b eH

10 Shah key must bo fu lly c apt ive before motor is started

1 1 Provide proper safeguards fo r personnel aga lnst Possible failure of motor-mounted brake pilnlcula rly on applications Invo lving over-hauflng loads

Location

Drlpproof motors 8 re Intended tor use whe re atmosphere 15 rc l U lvely c [e iln d ry and nonmiddotcorroslvc Keep wind ings clean w ith il soft bru sh c loth or 5uction

2 Totally enclosed motors m ay be installed where dirt moisture and corrosion arc preshysent or In outdoor locat io n s The d r ain p lu g In the end bracket m ust be removed p e ri shyod ica ll Ylo dra i n accumulated condensation

3 E)(p les ionproof mOlors are bu i lt for use In hazardous locations as indicated by Undershywriters label an the motor

NOTE In all cases no surround ing structure shou ld obstruct normal flow of venti lilting air through or over the motor

Instullatlon

Fasten secu rely to 8 f la t base w ith mil x imum sizB belts All ball Or ro lle r b e a r in g norm a l thrust m otors m ay b e mounted in any posishytion Do nol d ri ve sheavos cou p lin gs sprocshykets or pinions on m otor shaft

Direct Drivo

Al ign shahs Bccur tely If reverse r at iJtion is detrimental to the driven device check rotamiddot t ion BEFORE connecting the m o tor to the load See stan up

V-Belt Drive

1 middot Mount motor sheave clos e to bearing housing

2 Allow suHicient clearance for rOlor end play

3 Sheave diameter should not be less than NEMA recom mended value See NEMA MG1middot1442

4 Al ign sh eaves ca reful ly t ighten b e lts only eno ugh to preven t slip p age

Flange Molor

Fits are accurately machined to male w i th driven equipment Mat ing surfaces must be free o f dirt or burrs and so lidly engaged The Dssembly should turn freely without stressing shaft and bearings from misalignment and thrust

Electrical Connections

1 Connect molt~r per nameplato to correct power supply

2 Insta ll a lt wiring fusing Cl nd gro u ndinn in acco rd il nce w ith Nat ional Elect rical Code and lo cal requ irements

3 Identity motor aux il iary devices such a t sp ace heaters or tompe rature sensors Con shynect In propor circ uits and insulate from motor power cbles

Wound Aotor Motors

a) Connect cablos from sCCOndiHY control to brushholder assemblv Bring cables through squeeze connecto r on front brackAt where provided

b J S lip rings m u st be mainta in ed smooth an d true Mach ine to r eS lo re proper surface fo r b rushtts

c) Bru shes m ust m ake go o d contact w i th slip rin gs along the who le tace of brush If nceded grind blushes in w ith flne sandpaper Do no t usc lubricants Service p ons a re proshyvided for Inspection of sli p rings ilnd brushes Spring p f essure is preset at obout lb on 21 Smiddot286T frames and 4 Ibs on 324-449T fram es

d M ust use 5~mH grade of brush es

NOTE Continuous lig ht load operation can develop thrsilding (ring middotgroovlng) Differshyent brush grade may be requi red C o nlilct fa c shytory

12 - 8

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 32: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

middot

Medium Ac Motors I ~

Renewal Parts j I~ bull -1

lt1

0 jL ~I [nl at Inn bull - -I r o O

- s middot -

Ph imiddot I I

11middot 1lt 11 I Hmiddot

If _ ~-1 I middot middot H r tCl ~~ Clt

0 or 0 lHI d I ~ bull N 0 Ie I l 0 0 I bull ~ 0 1 ]V 0 e 11 loa ~tP hmiddot 1ltIJ -II

c ~0

~ - bull 1 bull bull - 1 -lt ~ I 1 1bull 0 oJ bull bull bull ~ bull r ~- ~( ) -middotfh I I P L l- middot I~ ~ - 1 ~Plmiddot

i C~ ~tJmu 5TF1FnRD-GPAHftmiddot~ [NGRG rOBP ( 10)1 OJL Nr 5A8 roJHI Sl ~ 445TDl i p~ltll Ofh Nu KC-liJ9pound r~G ~ I ~nl 1 S11I 1r d 0 ~I~ N(J 79(60360 0 middot8-79 I

12 - 9

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 33: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

__

i

r--

FramD E1820 -EJCU50 Frmllll Elt40-4D-ES05S0 hofO 8 holo uqually IPilC(XI ae shown

-~-

J

MJO I I

--l ( it bullbullshy

I I I i I

ELECTRIC I j Dimensions and Shipping Specification l middotmiddotmiddot-middotmiddotmiddot- -I

shyI -

~____--JshyBS Flameproof-Fan Cltfolea-- Cage ~ middotmiddotmiddotmiddotE-Rmiddotahge 0 TYPE FLANGE MOUNTING E162 TO ES05 (With or Without Feot)

4~1 rr ~~~ p~---( r-k~~~middot~-l-imiddot-middot----f--~-oo~-t-~-~-- t bull IUoIorfII t Lim on AK ClmonlonI ~ ~ AKt EI8JOJE215D t OOOQ- middotOO~ middot

- bull =1-10- E2S0IEonoo 000-middot middot00l

I l ~OEJb~O middot1 middot0000middot oaE-

t _ _-- 1- ~~~~~~ will ~o~~~o ~dOd bJt It InA~ bo loss 10 Iholt shims uJllo

BE -i mo~ ba necauQr --v Tho littlor ~ cJirClly (ulluwlllu II

numltrala on Ihll dlmonion tablo Indlshyc]Ibullbull a nlolor wHh 4 small 3hlllll ulliLlflltllofl

hlJe 4 hoibullbull drllliid III 45middot 10 va rile I eontro lInot (dlllonion DF) lor cOri)ln 2-pola nlnchlnn whoru II Is anllclpIOd thai tho drive will lJ~ tJuacl Gnd nol UY moan 01 ) pullllY

AA KEY DETAILS -------j

-

~ g iii

Fsio ABC 0 E F GH J K LOP T )UV Ae AGAHAJIAIBABSeOeEBF BGi ii~ l (1620 8 51 13 4 31 2 n 11 2 6 81 8 I 2 81 11 h 2 81 71 21 I al 1 H 4 I I middot I) j4l ElMO d 61 4 3121 2 ott I dh 11 21 81 12 21 01 11 21 1 tI 1 I I 1 middot643 E1820 bull bull 14-11 4 54 Ii J 11 2 611 91 101 11 11 3 0 11 H 3 I bull ~I I 11 I 5 I 1 I 2middot1 middot019 El 11-1 0 bull 7 1511 4 312 J 1 2 71 91 101 Ii I~ 3 0 12H 3 10 9 21 11 l--rr-s-r~rmiddotmiddotl 21 middot910

_ E21~~191 7 181 5121 ~ 21 PWllllH q 11 311 151 30 bull 3 1 11 I 1 611 1 I j 1-225 E2150 101 9 201 51 431 I f2 21 91 11 1111 II II 31 II lal 31 10 9 31 I 11 I II 1 1 I I 1 J 1middot225 E2S40 12 10124 8 5 41 I 2121101 121131 11 I 4j III 19 121 11 I I 14 H I 1 r~-4J1f E2560 12 12125 61 ~ 5 I 21 21 111 121 13 1 II 1 111 201 4 12 II 41 middot1 14 I II 91 Ii I 1--13 E284D 14 12 210 7 514t I I 3 3 11- 14115 II 51 I~i 21ff 61 12 II 4 I Ii 91 11 41 H05

bull [OGO 14 13U 1 5 5 3 3 10 14 15 2 Wli21 23lL~UiL1 Ll~1li9k1lU_SD--~~f 1-~~---~i-i-7~071~T-j~i-Il--tI-~-~~~t-ii--i-middot~ ~$~ ~ ~~ ~j~ ~ ~ ~ ~ H ~ ~~~ --iEiilii~~0~_iir-il~crl~ii4ctl_-g_7--i5tlr---jtrf-i-i3r1-nSITI-iii-91f-i20i-2~lril2nlr--7i-ii0iil-i2 a 14 51 middot1 fli-j-iiTTT1---O 2 115

ElMO IB 141351 Q 1 ill 1 U 31 Idl 101 20f 211 21 11 161 281 71 I 1 I 1U tI 12 2 I 1 6j 2-ffi

_iETl8G5Sr=0~8-r14il~32~1i-i9~Ir-Dii1If-i-r-_I1i1-4~~31f--lt~1i-ii19C1-i2~0T21l 21 4 181 ~ 1 18 14 SillS I II 12 2 I I j--iu5 E41gt-0 2 14 381 10 0 amp Il H

middot4 31 11) 21 221

211 21 01 111 101 010 18 61 I 22 1 Ii 12 2 I I 1 2middoti6middot

pound405D 20 16t 401 10 8 61 1-1 ti 4 JI 181 21 221 211 2 81 111 31 01 18 6 ~2 1 fI IJI 2 1 I 7 2 middot516- pound4G4S0 20 14 341 10 8 81 11 111 21 221 ~Il 21 4 111 301 120 18 GI 22 1 Ii 121--i---32T15it 31 E405SD 20 181301 10 8 61 H tt 31 181 21 221 211 21 417 311 4120 18 61 I 2~ I It 1~1 2 I I Ie 3 2middot115

LmiddotiiXifim0---ii22---iic7llt--i44_ir--i9i-7~1f-i-1r--plusmniIl-~i5-91i-22r-i~4crl-2i-i-~3TI-i9TI-781 341 91 to IS 11 1 22 I H 11212 lin 2-755 XE4-I50 22 I 46 II 9 8t 11 ti 5 2~ 22 241 211 JI 91 li1j 301 91 20 10 11 n I middotil 151 2 ~ I 8 2middot155 lmiddotXltgt-2EmSD-ii22--iIiinc-301-II--971ri-I-nti-T-gtsmiddot--91-21241 21 21 41 lal 041 middot11 20 18 11 i 2 1 H 141212 3 2115

--XE-SSD-2---i-QI4l--1t-iil-OIi-Tti-----S-2701-0224--2I-I--i-I-01 Jal 2Q 19 11 1 22 1 H 151 2 2 1 I 3~ E~O 25 1948 12 10 B 11 1 5 5 211 2612) 31 31 101 01 301 101 22 18 8 1 tI IGI 3 2 I 1 81 301shy

I E50S0 25 211501 121 10 0 Ii 1 6 5 221 26121 J 31 101 201 ~Ol 10122 18 8 I 2$ I If 171 ~ 2 I 1 61 3middot005 I ESI)45D 25 1451 12 10 8 11 I S 5 211 26127 31 21 1 201 391 1 22 18 81 25 1 tl ISI3 2 I I 51 25)0 ----e505S0 25 211 411 121 10 9 I 1 5 5 221 227 3 21 7 201 401 7 22 18 at 25 I II 111 3 2 I 51 2middot516

Prtllnllnary tJlmonalcnt 11(0 upprollmolu on I raqulrod a lully curtlnud prlrlt will bo lorwardod on fflCD1pl of otncll oclo(

SHIPPING SPECIFICATION Frame Nett Grobullbull Caampa Ocoan rrama Natt Grobullbull CGIO Ocoan Ftam Nolt Gro bullbull COlO Oeon

SJze lb lb Dlmenllon Tona Sizo lb lb Omonlons TensSiz lb lb Dlmanalone Ton E2S6D 314 302 30gt 26)(2Q 0middot23 pound40 1453 1503 lt4S)(35)20 0middot(6shyEts2D bull 78 106 20)( 18x 16 0middot07

pound10 pO 110 20)11 18)C 15 0middot01 E40SD 1613 17 middot(1(35)129 0 66UIl-lO 318 482 34(28)(23 0 J2 E182D loa 22)1122)117 012 XE444D 200a 2249 49)137)( 31 0 81E2SIe 428 518 34)(28)(23 0 322 E3240 518 822 3Sx30)2GEI840 128 182 22)(22)(17 0middot12 xe50 2235 2435 51 x3hdl1 0 -8-10 E2t3D 182 218 28)(24)(18 0 1amp pound)250 5GO 09 lSx30Jo(2a g-t E5040 2710 2U08 55 x 40)(J5 -t -11

ES050 291 J219 57)( lt40)( J5 -15UI5D 19 250 2Gx24x18 O-UI El840 101B 11~3 41 x33)(27 0 52 U$4D 282 350 30)(28)(20 0middot23 EJ850 1168 1268 42 J3)( 21 054

IMPORTANT Shpplng Spoctncstlooo are pprolllmalo onlv and wo do not accopt rupontlbJlII tor an dDtlallon In apoclne Inslol11CO) For ahlpmont nbroad motDrD IIrO pockod In strollO non-returnable caBObull Tho wotohli olltlon are lor malo with biUQ 011611 ollcf~Jon

BROOK MOTORS LIMITED HUDOERSFIELO ENGLAND Prlnled In Engfllnd 7IE3GS

12 -10

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 34: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

I

lt-- Y~

Brit ish-S-ta-nd-ard-Fla-mmiddotemiddotproofMotors~Clg e_ JE Range 50 Cycles 650 Volts Maximum - Temperature Rise 65degC I THREE PHASEmiddot Continuous Maximum Rating

Full Full Dilocl Starling Star Delta Startino ILoad LOud 01 Fu ll Load 01 Full Load Speed Amps Efficiency Power Factor

HP Frame rpm on 400 V 11 i 11 I Torquo Current Torqu Curront

E256 2920 27middot0 89 88 87 91 middot90 middot88 230 700 70 23020 E234 1460 270 88 88 87 90 09 middot82 220 750 70 250I E324 975 28 0 89 89 88 86 middot84 78 200 700 60 230 E320 730 290 88 87 85 middot84 80 76 165 650 50 210

25 E264 2920 330 09 89 87 middot91 middot90 88 220 650 70 210 I E28G 1460 340 89 89 88 90 middot89 85 180 650 55 210

E326 975 35 0 90 89 e8 86 middot81 middot76 200 700 60 230 E364 730 35 middot0 91 91 90 M middot83 middot75 180 650 55 210

r---- E286 2920 40middot0 89 89 87 middot91 90 middot80 220 650 70 210

IE324 1470 390 90 90 89 middot91 middot90 03 180 650 55 210 middotao E364 975 39 0 91 91 90 90 88 middot8S 180 700 60 230 pound365 730 420 91 91 90 85 83 middot75 180 650 55 210 ----_- - -------- - - shyE324 2940 530 09 89 87 91 middot90 middotno 220 700 70 22040 E326 1470 52 0 91 91 90 91 middot90 08 180 650 55 210

E365 975 520 91 91 90 middot90 middot88 86 165 650 50 210 E404 730 54middot0 92 91 90 86 84 60 165 620 50 200

E32~ 2940 66 middot0 89 89 87 middot92 91 90 220 700 70 22050 pound364 1470 670 90 90 89 middot09 middot88 84 200 sao 60 160 E404 980 660 91 91 90 90 B9 86 165 650 50 210 E405 730 680 92 91 90 86 middot84 middot80 165 620 50 200

60 E365$ 2950 170 89 88 86 middot94 93 middot92 165 750 50 240 E365 1470 800 91 91 90 middot89 middotB8 85 200 500 60 160 E405 980 790 91 91 90 middot90 90 87 165 650 50 210 E444 735 800 92 91 90 middot87 85 81 165 620 50 200

E4045 2950 95 0 90 89 86 middot94 93 92 165 680 50 22075 E404 1480 97middot0 91 90 88 92 91 87 165 650 55 210 E444 980 97 0 91 91 90 91 90 BB 165 650 50 210 E445 735 1000 92 91 90 87 85 middot81 165 620 50 200

E405$ 2950 1260 91 90 88 94 middot93 middot92 165 680 50 220100 I

E405 1480 127 0 92 92 91 middot92 middot90 middot86 165 650 ~5 210 E445 980 130middot0 91 91 90 91 middot90 88 165 650 50 210 E504 735 133middot0 92 91 90 middot87 middot86 82 165 620 ~O 200

XE444S ~950 157-0 91 91 89 middot95 middot94 middot93 165 660 so 220125 XE444 1480 159 0 92 92 91 middot92 91 83 165 650 55 210 E504 980 159 0 92 92 91 middot92 middot91 89 165 650 50 210 E50 735 1660 92 91 90 middot87 middot06 82 165 620 50 200

XE~55 2950 lB20 91 91 89 middot95 94 93 165 660 50 220150 XE445 1400 1890 93 92 91 middot92 91 middot90 165 550 SS 210 E505 980 191 0 92 92 91 92 91 B9 165 650 50 210 I

ES04S 2950 215 0 92 91 90 middot95 middot94 93 165 680 50 220175 E504 1480 218 middot0 93 92 9f middot93 middot92 middot90 165 650 50 210

E50SS 2950 246 0 92 91 00 95 94 middotP3 165 680 50 220200 E505 1480 240 0 93 92 91 94 middot93 91 165 650 50 210

BROOtlt MOTORS LIMITED HUODERSFIELO ENGLAND f1lnled In Enalalld J lJlCO

I

12 -11

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506
Page 35: MINISTRY OF OIL1-The requisition to be sold in (250, ˘ˇ ˆ account number (90956)in Rafidan Bank head branch . 2-Technical and commercial offer should be opened at the same time,

I1JOI-5 tnu I

PERFORMANCE DATA

British Standard FIamep-roof Motors - Cage IE Range 50 Cycles ~ 650 Volts Maximum - Temperature Rise 65degC THREE PHASE - Continuous Maximum Rating

Full Full Diroci Starting Slar Delta Starling Load Load oJ Full Load oJ Full Lood

Speed Amps Efficiency POWN Factor HP Framo rpm on 400 V 11 I I 11 I I TorQue Current Torquo ell r(f~nl

1 E162 950 115 70 68 ~ middot67 middot59 middot47 220 ~80

2 40Ellgt1 700 14 67 6G 58 middot57 middot50 200 450

3 Ellgt1 9GO 1-6 7J 71 66 middot70 62 middot49 220 460 54E182 710 20 75 73 68 45 J4 240 4004

E162 1410 1 95 70 66 60 79 74 ~ middot240 5001 E182 950 21 75 75 69 68 61 -51 220 450 EI84 710 H 72 72 6J 62 -53 45 200 400

E162 2640 2-6 75 74 69 middot64 75 64 300 6501~ EI64 1410 H 73 71 87 middot82 77 68 240 550

2 66EI64 2840 H 7S 74 69 -85 middot77 Jeo 650 E82 1440 J5 80 79 75 middot78 middot70 middot57 250 650 EI64 950 JoB 78 78 76 middot73 66 middot56 220 500 nJ 720 J -8 83 82 75 -68 60 45 180 550

E182 2880 4-3 83 62 78 middot00 middot87 77 230 700 70 2303 EI64 1440 H 83 82 79 81 -74 62 250 650 ao 210 E213 050 5middot3 81 80 76 middot75 middot67 middot5J 200 550 60 IBO E5 720 u2 83 83 7S -)5 -bB middot ~a 200 500 65 1Ot) EI64 2680 H 83 92 79 90 middot67 middotn 2JO 700 70 230 E213 1440 n 85 64 83 middot82 -79 middot72 210 620 65 200- 5Cmiddot jJ~ E215 PfiO 64 81 01 78 middot76 middot72 middot50 200 ~~o G5 180 E254 720 8middot4 64 04 82 middot76 -71 middot60 170 500 50 150J ~ cJ shy

84 ~ 7~ E215 1440 11middot3 6S 84 83 middot84 middot79 middot72 200 620 60 200

E254 960 125 85 85 83 75 71 58 lfi5 500 5S 190

- ry E213- 2900 10 middot5 86 85 82 90 89 230 700 70 230

D shy i--1gt E256 720 12-2 85 85 83 -76 71 middot60 175 550- 50 170

EZIS 29CO 13-5 67 86 83 middot91 SS 80 230 700 70 2301)~ 10 E254 1440 14-2 86 86 as 68 middot86 -81 200 650 60 210 pound256 950 15-3 85 85 83 -83 -78 68 210 700 65 220 pound264 725 16-2 B6 B6 84 -77 middot71 50 175 550 55 170

rtf J~ E264 960 18-2 89 88 87 85 middot83 7a 165 600 50 200~I uP 1212 E286 730 19B 87 S6 as 79 middot74 62 165 600 50 190

E254 2920 20middot0 89 88 87 -91 68 230 650 70 21015 bull E258 1450 21 -0 87 S7 86 68 middot81 200 5S0 60 210 E286 970 21-0 89 89 88 86 1_ 74 170 620 55 200 E324 730 23-0 87 86 83 80 64 IuS 600 50 200 ~ --

~ I

~

I

12 -12

  • 1207
  • 1267
  • 1282
  • 1285
  • 3506