MINING

PRODUCING DEPENDABLE MINING PRODUCTS FOR MORE THAN 40 YEARS

WEAR & IMPACT STEEL

FABRICATION SPECIALISTS

TOUGH. RELIABLE. INNOVATIVE.At Clifton Steel, we stand behind our mining products, manufactured to meet and exceed the

highest quality standards in the industry. For more than 40 years, we have produced dependable

products, while working side-by-side with our customers. Clifton Steel provides innovative

solutions to wear problems in a host of applications in both underground and surface mining.

Material handling, shoveling, hauling, crushing, and sizing — you can depend on Clifton.

Using a wide variety of wear products and leading-edge fabrication techniques, Clifton Steel

delivers the best solutions to your wear challenges, with excellent results.

PREMIUM QUALITY. DEPENDABLE PERFORMANCE.Clifton Steel covers the complete spectrum of abrasion, impact resistant plates and high

strength steels necessary for staying competitive in today’s mining markets. We help

you reduce lost production time due to worn parts that hamper throughput during peak

production season. Clifton Steel offers quality that lasts to reduce maintenance cycles —

and keep your production flowing.

WE PROVIDE SOLUTIONS.Focused on your bottom line, we work with you to reduce time and money spent maintaining

and servicing different parts. By working with our in-house engineering team we can help you

design standardized parts to improve wear, reduce your inventory and save you money. With

over 40 years of experience in the mining industry, Clifton Steel understands your problems

and is prepared to solve them.

MINING

APPLICATIONSBin Liners

Chute Liners

Crusher Main Frame Liners

Cutter Blades

Dozier Blades

Drag Bucket Liners

Drag Line Pins in Linkage & Buckets

Grizzly Bars

Haul Truck Bed Liner Kits

Hopper Liners

Links

Long Wall Miner Bed Liners

Loader Bucket Liners

Primary, Secondary & Tertiary Crusher Liners

Ripper Bars

Rotary Breaker Grates

Shovels

FABRICATION SERVICES

WELDING Our expansive capabilities encompass an entire range of manual and

automated welding technologies, including TTG and MIG for manganese

and other steel alloys. At Clifton Steel, pre-heating, full-edge preparation

and post-weld stress relieving are standard processes—not expensive

options.

DRILLING Clifton Steel drills and countersinks holes from 1/4 inch to 5 inches

in diameter … even through 15 inch thick plate. Using leading-edge

technology, we deliver fast, efficient, and exact drilling finishes, even in

hard-to-machine, wear-resistant materials.

MILLING Put Clifton Steel milling capacity to the test. We manage it all: Mill slots,

thread holes, bevel, and chamfer—even in tough, wear-resistant materials.

FORMING At Clifton Steel, precision work is our specialty: Our experienced team

forms our full line of abrasion and impact-resistant materials to meet exact

customer specifications.

SAWING Clifton Steel employs rugged band and hack saw capacity with cutting

capacity up to 24 inches in diameter. Rotary carbide saw capability

handles all manganese rounds up to 4 inches in diameter.

FLAME CUTTING Our team at Clifton Steel flame-cuts plate to any desired length up to 15

inches in thickness and 120 inches in width. When necessary, we apply

pre-heating and controlled post-cooling processes to assure clean cuts

without stress cracking at the edges. When working with heavy plate,

pre-heating and post-heating processing are standard procedure to ensure

product integrity.

LASER AND WATER JET CUTTING Clifton Steel offers high-tech laser and water jet cutting to meet the

express needs of our customers. These processes deliver close tolerances

with a clean-edge finish for optimum quality and performance.

MATERIALS

All of Clifton Steel’s abrasion and impact plate products are fabricated to

exact specifications for consistent, controlled quality. Our dependable product

line delivers superior weldability, formability, and toughness in combination

with superior flatness and a clean surface, making Clifton Steel quality and

performance the industry benchmark.

TENSALLOYTM EXTRA

Clifton Steel’s TensalloyTM Extra (also referred

to as HY 80 and HY 100) is a high alloy

abrasion and impact resistant steel plate

that offers corrosion resistance and heat

resistance.

TensalloyTM Extra contains high levels of

chrome and nickel which allow it to resist corrosion. This chemistry also

provides greater resistance to heat. When other AR plates become soft at

400 degrees Fahrenheit, Clifton Steel’s TensalloyTM Extra remains stable at

atmospheric temperatures up to 1,000 degrees Fahrenheit.

TENSALLOYTM BLUE 500

TensalloyTM Blue 500 is a premium wear and impact plate that provides

the highest level of protection against wear and impact.

Hardness: 477- 550 BHN

TENSALLOYTM 450

TensalloyTM 450 provides additional hardness and strength at a modest

cost increase over standard TensalloyTM 400.

Hardness: 420 – 477 BHN

TENSALLOYTM 400 TensalloyTM 400 is the everyday plate for applications that call for a long-

lasting wear and impact resistant material.

Hardness: 360 – 440 BHN

AR 250 AR 250 is a low-cost, abrasion-resistant steel plate that offers

outstanding wear and impact resistance at an economical price.

Hardness: 200 – 280 BHN

CLIF-CLAD® CHROMIUM CARBIDE OVERLAY PLATE

Clif-Clad® is a bimetallic plate consisting of a mild steel base plate

overlaid with a high chrome/high carbon composite. This composite

contains 30% chrome and 5% carbon that form the chromium carbide

particles that make the surface extremely hard and resistant to wear.

The overlay layer has a metallurgical bond with the base plate and

will not separate. Clif-Clad® is impact resistant, will not corrode and is

resistant to high heat.

Hardness to 600 BHN

TENSAMANGTM 11-14% HADFIELD GRADE MANGANESE STEEL

Clifton Steel’s 11-14% Hadfield Grade TensamangTM manganese steel is

a special work hardening grade designed to become increasingly harder

with impact. TensamangTM will work harden to 550 BHN, making it ideal

for high impact applications.

CONTACT A CLIFTON STEEL REPRESENTATIVE TODAY!

1-800-745-3962 INFO@CLIFTONSTEEL.COM

COMMITTED TO QUALITY, PRECISION AND PERFORMANCE, CLIFTON STEEL OFFERS A FULL RANGE OF MATERIALS AND LEADING-EDGE FABRICATION PROCESSES TO PRODUCE LONG-LASTING, INNOVATIVE SOLUTIONS TO YOUR WEAR PROBLEMS.

Since 1971, Clifton Steel has operated as a full-service specialty steel distributor and manufacturer,

specializing in abrasion-resistant, high-impact, high-strength steel fabrications. We serve our loyal

customers in a host of industries, from aggregate and mining, to military and railroad, as well as a

variety of other industrial applications. Clifton Steel delivers a level of seasoned experience, proven

expertise and personal service that is unmatched.

PUT CLIFTON STEEL’S INNOVATION TO WORK FOR YOUR BUSINESS TODAY!

CLIFTON STEEL COMPANY16500 ROCKSIDE ROAD MAPLE HEIGHTS, OH 44137 E-MAIL: INFO@CLIFTONSTEEL.COM FAX: 216.662.6107

1-800-745-3962www.CLIFTONSTEEL.com

©2013 Clifton Steel Company. All rights reserved.The imagery and content of this brochure is for marketing purposes only. Please contact Clifton Steel with questions regarding your exact specifications.