minimec 2 - normet
TRANSCRIPT
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 [email protected]
1/9
www.normet.com
Normet reserves the right to change this specification without further notice.
Minimec 2
100141705 | 21.10.2019
SafetyThe safety is further increased by the stability of the machine and the possibility to drive and spray remotely from a safe distance. In addition, the drive hub motors are equipped with spring applied brakes which are activated whenever the operator releases the controls. Minimec is CE-certified and meets the industry requirements and safety regulations.
Very agile and robust carrierThe spray manipulator is mounted on a sturdy tracked carrier which is driven by a powerful, yet quiet diesel en-gine of the latest generation. The two powerful indepen-dent hydraulic drive hub motors allow turning on the spot.
Hydraulically activated stabilizers ensure a safe stand of the carrier during the spraying process. The included additional foot blocks provide even more stability on soft ground and in slopes. Easily accessible lifting points at the center of the machine allow easy and safe lifting.
Plenty of power for a dynamic operationThe electric motor or diesel engine provides the spray arm and spray head with the hydraulic power for a dy-namic spraying operation. The well protected air/oil cool-er delivers the cooling capacity required for continuous operation.
Build for purposeSix powerful LED-lights on the boom and carrier provide a great illumination of the working environment which makes any additional lighting obsolete.
The field-tested and fast responding spray head with a wide and high range and the greatest possible degree of movements facilitates the correct application of a high-quality sprayed concrete layer even in very confined spaces.
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 [email protected]
2/9
www.normet.com
Normet reserves the right to change this specification without further notice.
Introduction100141705 | 21.10.2019
SPRAY BOOM
Telesopic boom extension 1900 mmNozzle rotation 360°Nozzle tilt 180°Automatic nozzle oscillatorBoom rotation 110°Boom coverage:
Lateral 6000 mm (with spraying distance 1500 mm)Vertical 7200 mm (with spraying distance 1500 mm)
CONCRETE LINE
Concrete hose diameter 65 mmHose length 5 mHose equipped with anti-kink springNecessary clamps and gaskets
ACCELERATOR AND AIR LINE
Boom air line 1 1/4”Boom accelerator line 3/4”Connection block with quick connectorsShut-off and bleed valves
BOOM CONTROL SYSTEM
Two joystick radio remote control for spray boomControl functions:
Boom movementsNozzle head movementsNozzle oscillator on/off
Adjustable movement speedsBack-up cable for radio remote
BOOM HYDRAULIC SYSTEM
Electro-hydraulic power pack 11 kW / 50 Hz / 1450 rpmVariable displacement pump:
190 bar, 45 L/minHydraulic oil tank capacity 55 L
Proportional boom control valve
PERFORMANCE
Tramming speed (on flat) 4.5 km/hMax tramming incline 20°Max tramming incline (sideways) 10°Max working incline 10°
HIGH VOLTAGE ELECTRICAL SYSTEM
Mains supply voltage ● 50 Hz
● 380/400/415 V ○ 440 V ○ 525 V
○ 60 Hz ● 440 V ○ 460/480 V ○ 575/600 V
LOW VOLTAGE ELECTRICAL SYSTEM
24 V LED working lights12 V LED driving and parking lightsSignal hornWarning signal for carrier movementsBattery charger for remote control
CARRIER
Catepillar C1.1IOPU 552-5768 18,4 kW, 2800 RPMTier4 final EU Stage 5 BatteryElectric starterFuel tank 5.5 LHydraulic system
190 bar, 36 L / minHydraulic oil tank capacity 55 L
Four mechanical levers for tracks and support legsHydraulic drive hub motorsSpring applied brakesHydraulic support legsTwo rubber tracks (surface contact 200 x 1300 mm)
OTHER
6 kg hand-held fire extinguisherSupport leg feet extension blocks
ACCESSORIES
○ RDS drivePossibility to drive and use support legs by using remote control
○ Supply cable IEC (no UL / CSA approved) 25 m
● = Default ○ = Option
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 [email protected]
3/9
www.normet.com
Normet reserves the right to change this specification without further notice.
Technical specification100141705 | 21.10.2019
SPARE PARTS
Spare parts package A: Available for 1000 h of use*. Includes periodical service, most common wearing parts and most critical safety parts.Spare parts package B: Available for 3000 h of use*. Includes periodical service, most common wearing parts and most critical safety parts.* Recommendations are based on average hours - can vary a lot depending on work site conditions.
AUDIT SERVICES
To improve machines performanceTo improve your processes performance and quality
SERVICE CONTRACTS
Spare parts supply programmesScheduled inspection programmesSupervision programmesPeriodic maintenance programmesMachine usage programmes
TRAINING SERVICES
Available before delivery, at start up and after delivery.NOTE! after/during Start up / Commissioning as addi-tional training days these are cheaper.In general, training reduces operation costs.
Product training: • Operation and Maintenance • Foundation of electrics, hydraulics and mechanics • AuditProcess training: • Concrete spraying • Charging • Scaling • Process audit
WARRANTY SERVICES
Extended warranty
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 [email protected]
4/9
www.normet.com
Normet reserves the right to change this specification without further notice.
Accessories and services100141705 | 21.10.2019
1. OPERATOR TRAINING
Start-up training Commissioning
1.1 Classroom trainingGeneral introduction and operation of machine Comprehensive No classroom Safety instructions Comprehensive Use of manuals Comprehensive training included inTechnical introduction of equipment Comprehensive Hands-on service and pre-operation checks Comprehensive commissioning Controls and driving Comprehensive(starting, driving, stopping, parking) Work method Comprehensive
1.2 Practical trainingPre-operation checks Comprehensive BasicDriving, starting, stopping, parking Comprehensive BasicPreparing the machine for specific Comprehensive Not coveredoperation conditions Operation Comprehensive BasicWashing the machine Comprehensive BasicTroubleshooting Comprehensive Basic
2. MAINTENANCE AND REPAIR TRAINING
General operation of machines Comprehensive BasicSymbols of drawings and codes Comprehensive Not coveredUnderstanding hydraulic and electric schematics Comprehensive BasicControl systems Comprehensive BasicFunction of main components Comprehensive Basic(depending on equipment)Locations of components in the machine Comprehensive Not coveredPeriodical maintenance Comprehensive BasicTroubleshooting Comprehensive Not coveredUse of manuals Comprehensive BasicConnection of hydraulic and electrical equipment Comprehensive Not covered
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 [email protected]
5/9
www.normet.com
Normet reserves the right to change this specification without further notice.
Equipment hand-over services100141705 | 21.10.2019
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 [email protected]
6/9
www.normet.com
Normet reserves the right to change this specification without further notice.
SIDE VIEW
Transportation / Operational
Dimensions
TOP VIEW
DIMENSIONS AND WEIGHT
Length 3170 mmWidth 1100 mmWidth (support legs extended) 2400 mmHeight 2250 mmGround clearance 180 mmWeight 1720 kg
100141705 | 21.10.2019
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 [email protected]
7/9
www.normet.com
Normet reserves the right to change this specification without further notice.
Dimensions
BOOM COVERAGE
Vertical
100141705 | 21.10.2019
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 [email protected]
8/9
www.normet.com
Normet reserves the right to change this specification without further notice.
Dimensions
BOOM COVERAGE
Lateral
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
A A
B B
C C
D D
E E
F F
G G
H H
I I
J J
K K
L L
Drawing number
Dsgn
Rev
NOR340Gen.TolRUISKUTUSVARUSTUS, WITH AIR AND ACCELERATOR LINE EQUIPMENTS, MINIMEC
0DMINIMEC_TDS_384785RDVEL-HK 2.1.2018
SPRAYING EQUIPMENT, WITH AIR AND ACCELERATOR LINE EQUIPMENTS, MINIMEC1 /1 Sheets
0 1 2 3 4 512
2 1 0 1 2 3 4 5
0
1
2
3
4
1
2
3
4
6m
6m5
5
0 1 2 3 4 5
6
5
4
3
2
1
0
1
2
3
7m
6
40 1 2 3 4 5 6m
NEWRDVEL-HK3.1.20180NameDate Change descriptionRev
4500
3800
19503170
1100
2200
5900
1100
180
2600
2200
2250
110
SUPPORT LEG EXTENSION
2400
55°55
°
1500
1500
100141705 | 21.10.2019
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 [email protected]
9/9
www.normet.com
Normet reserves the right to change this specification without further notice.
100141705 | 21.10.2019