mifi ant insall

Altai U1 Quick Setup Guide

© Copyright 2012 Altai Technologies Ltd.

Package Contents 1. Altai U1 Super WiFi USB Client 2. USB Cable (60cm) 3. Installation CD

Minimum System Requirements 1. Desktop or laptop PC with 1GHz or faster processor and 512 MB or more RAM. 2. Available USB 2.0 port. 3. Windows: XP SP3 32-bit/64-bit, Win 7 32-bit / 64-bit.

LED Indication

Cable Connection 1. Connect micro-USB connector of the USB cable to U1. 2. Connect the other end of the USB cable to the USB port of your computer.

Because U1 gets its power from computer, no external power supply is needed. The power LED should light up when U1 is plugged in and the PC is on.

Download and Support Latest software and document are available at the following link http://www.altaitechnologies.com/support_download.php Technical Support: [email protected]

1 2 4

mailto:[email protected]



Find out the OS of Your Computer The installation and configuration procedures are different depending on the OS of your computer. To find out the OS of your computer, right-click “My Computer”, choose “Properties”.



Windows XP

1. Download the U1 installer for Win XP from Altai website or copy it from U1

installation CD and put it to a specific directory. In this case, it is put on the

desktop.

2. Connect U1 to the computer and you will see the following popped up window,

please choose “Cancel” to exit current installation.



3. Please double click on the U1 installer icon to launch the installation program.

The installer will automatically detect your OS and prepare to install the relevant

driver.

4. Please click “Next” to start to install U1 driver.

Please choose the destination directory where you want to install the U1 driver

and click “Next”



Select program folder and click “Next”

5. You will find following alarm. If you didn’t insert the U1 adapter, please insert it

now and then click “OK”. If the U1 adapter has been inserted, please directely

click “OK”.



6. Please wait for a while before you see the following successful page and click

“Finish” to exit.



7. Now U1 driver is successfully installed and you can use it to connect to wireless

network the same as you are using your laptop integrated wireless card.



Windows 7 32 bit / 64 bit

Part A. New installation of U1 driver

1. Download the U1 installer from Altai website or copy the installer from U1

installation CD and put it to a specific directory. In this document, it is put on the

desktop.

2. Connect U1 to computer and it will show “Installing device driver software” on

the bottom right corner. Please wait until it shows “Device driver software was

not successfully installed”. (We will install the driver manually in the following

steps)

3. Please right click on the U1 installer icon, choose “Run as administrator” and

click “Yes” to allow this program. The installer will automatically detect your OS

and prepare to install the relevant driver.



4. Please click “Next” to start to install U1 driver.

Please choose the destination directory where you want to install the U1 driver

and click “Next”



Select program folder and click “Next”

5. You will find following alarm. If you didn’t insert the U1 adapter, please insert it

now and then click “OK”. If the U1 adapter has been inserted, please directely

click “OK”.



You will find the Windows Security alarm window, please click “Install” to

continue.



6. Please wait for a while before you see the following successful page and click

“Finish” to exit.

7. Now U1 driver and U1 Utility are successfully installed and you can use it

connect to wireless network the same as you are using your laptop integrated

wireless card. You can also use U1 utility to manage your wireless network

connection



Part B. Upgrade from previous verson of U1 driver

1. If you have old version of U1 driver installed, you may see the following case

when you plug in U1. There are U1 and an unknown device listed in the Device

Manager. In this case, please uninstall both of them by right click on them and

choose “Uninstall”.

2. Please restart the computer after successful uninstallation of old drivers. The

following steps are the same in Part A.

mifi ant insall

Documents