Metso Lt300 LokoTrack Cone

(s/n 74346)

6 cu. yd. hopper with 48” x 10’-6” long vibrating feeder

Side walls of feed hopper hydraulically fold

Unit can be fed with excavator, conveyor, or loader

Vibrating feeder currently has grizzly sections blanked over, so all feed material goes into Hp300

crusher

48” x 20’ feed conveyor to crusher

Bypass conveyor - transfers material passing thru grizzly section to the front discharge conveyor

(bypassing cone crusher).

Hp300 Cone Crusher. Hydraulic crusher clearing. Eight crusher cavities to choose from depending

upon application.

Cone crusher is equipped with a sonic level sensor located in the crusher feed cavity to assist in

keeping the cavity level in a consistent ‘choke fed’ condition (feed can be set to automatically speed

up/slow down depending upon cavity level)

48” x 29’-6” front discharge conveyor. 8’-10” discharge height.

CAT C-15 540 hp Tier III engine

85kVA generator (unit equipped with electrical outlets for (2) 11 kw for auxiliary equipment, (1) 32

amp/460volt, (2) 16 amp/110 volt for hand tools

Water spraying system with pipes, hoses, nozzles (no tank, no water pump)

IC600 Controls with built-in diagnostics and Single button process start for ease of use.

4219 E 50TH

DES MOINES, IA 50317

Phone: 515-964-8600 WATS: 800-247-2400

FAX: 515-309-0667

For more information call Mark Bothwell at 515-681-8140, or Craig Harman at 515-681-0520

Remote radio control.

Tracks are 20” wide x 11’-3” c-c. D57 size.

Transport weight: 115,000 lbs.

Transport dimensions: 11’-6” w x 12’-5” t x 58’-7” l

Optional 30”x40’ recirculating conveyor that can be mounted onto LT to accept oversize material from

a screening plant, this 5,000 lbs. recirculating conveyor shipped separately.

Unit built in 2008. 4,587 process hours as of 3/25/15

A unique feature of this unit design is that it has all controls and self-contained power already on the unit (no

need for larger gen-set, additional electrical switchgear, electric cables, etc…..). Just track unit into position

and start running.

Unit is currently available and ready to work. Just let us know what your application is and we’ll help you

select the proper crusher liner configuration.

Without Feeder Assy Module

Lt300 less Feeder Module Assy & Counterweight

New transport dimensions:

14'-1" H x 11'-4" W x 54' L

Total Weight = 101,000 lbs.

Track length 14' long.