membuat georeferen arcmap
TRANSCRIPT
-
7/29/2019 Membuat Georeferen ArcMap
1/19
Georeferencing Images in ArcMap CGA, March 21, 2008
1
GEOREFERENCING IMAGES IN ARCMAP
The Georeferencing process allows for creation and storage of control pointinformation that assigns coordinates to raster datasets (.tif, .jpeg, .img, GRID, etc.)
for display of the dataset in its correct geographic location.
GEOREFERENCING USING MAP COORDINATES
Start ArcCatalog by clicking Start > All Programs > ArcGIS > ArcCatalog, or
click the icon in ArcMap.
InArcCatalog,browse to the folder your dataset is contained in.
Right-click the raster dataset and select Properties
Click the Spatial Referencetab in the Raster Dataset Propertieswindow
ClickEditin the same window to choose the correct map projection.
Find the proper projection / coordinate system info from your map and assign it to
the raster by clicking Select in the XY Coordinate Systemwindow and browsing
to the datas projection system.
Map projection: UTMDatum: ED 1950
Zone: 36
-
7/29/2019 Membuat Georeferen ArcMap
2/19
Georeferencing Images in ArcMap CGA, March 21, 2008
2
ClickOKto accept the current projection assignment.
ClickOKto close the Raster Dataset Propertieswindow
You can close the ArcCatalog window
OpenArcMapby clicking Start > All Programs > ArcGIS > ArcMap.
ClickAdd Data
Browse to your raster, click on it, and and clickOpento add it to the map.
ClickYesin the Create Pyramids for Data s Name
ClickView-Toolbars-Georeferencing Toolbar
Zoom inthe first coordinate on your raster data
Click theAdd Controls Pointto add control point
Click the left mouse button over the known location in the unreferenced image to
add the first coordinate in the link.
ClickView Link Table
X: 34 0000
Y: 464 0000
-
7/29/2019 Membuat Georeferen ArcMap
3/19
Georeferencing Images in ArcMap CGA, March 21, 2008
3
Type in theX Mapand Y Mapvalues for the first coordinate point
ClickFull Extentto see the whole raster data on the screen
Zoom inthe second coordinate on your raster data
ClickAdd Control Pointto add control point
Click the left mouse button over the known location in the unreferenced image to
add the second coordinate in the link
Type in theX Mapand Y Mapvalues for the second coordinate point
-
7/29/2019 Membuat Georeferen ArcMap
4/19
Georeferencing Images in ArcMap CGA, March 21, 2008
4
ClickFull Extentto see whole your raster data on the screen
Zoom inthe third coordinate on your raster data
ClickAdd Control Pointto add control point
Click the left mouse button over the known location in the unreferenced image to
add the third coordinate in the link
Type in theX Mapand Y Mapvalues for the third coordinate point
-
7/29/2019 Membuat Georeferen ArcMap
5/19
Georeferencing Images in ArcMap CGA, March 21, 2008
5
ClickFull Extentto see whole your raster data on the screen
Zoom inthe third coordinate on your raster data
ClickAdd Controls Pointto add control point
Click the left mouse button over the known location in the unreferenced image to
add the fourth coordinate in the link
Type in theX Mapand Y Mapvalues for the fourth coordinate point
-
7/29/2019 Membuat Georeferen ArcMap
6/19
Georeferencing Images in ArcMap CGA, March 21, 2008
6
You can checktotal residual
values in here
-
7/29/2019 Membuat Georeferen ArcMap
7/19
Georeferencing Images in ArcMap CGA, March 21, 2008
7
ClickGeoreferencingand clickRectifyto save the transformation information with
the raster.
Accept Cell Sizevalue
ClickResample Type >Nearest neighbor (for discrete data) generally this is
the best choice.
Type the rasters new name in the Name box
ClickSave
This creates a new file with the name specified, and an associated .aux file that
contains the coordinate information.
ClickAdd Data
Browse to the new raster file, click it, and clickOpen
The georeferenced raster is added to the map.
ClickYeswhen prompted to Create Pyramids.
-
7/29/2019 Membuat Georeferen ArcMap
8/19
Georeferencing Images in ArcMap CGA, March 21, 2008
8
See that the raster is
now in the propercoordinate space.
-
7/29/2019 Membuat Georeferen ArcMap
9/19
Georeferencing Images in ArcMap CGA, March 21, 2008
9
GEOREFERENCING USING A GIS LAYER
OpenArcMapby clicking Start > All Programs > ArcGIS > ArcMap
ClickAdd Data, and browse to the GIS layer to which you will georeference theraster data, select it, and click Open to add it to the map.
Notice from the coordinate display that the GIS layer is georeferenced already
-
7/29/2019 Membuat Georeferen ArcMap
10/19
Georeferencing Images in ArcMap CGA, March 21, 2008
10
Examine the source image that needs georeferencing for a projection definition.
Click the right mouse button on Layersin the table of contents.
Select Properties,
Select the Coordinate Systemtab in the Data Frame Propertieswindow.
In the Select a Coordinate System window, clickPredefined, and set the projection
to the same as the source map.
ClickOKin the Data Frame Propertieswindow,
-
7/29/2019 Membuat Georeferen ArcMap
11/19
Georeferencing Images in ArcMap CGA, March 21, 2008
11
ClickAdd Data,
Browse to the raster file from theAdd Datawindow and select it,
ClickOpento add the source image to ArcMap.
At the ArcMap message:
ClickYes,
At the ArcMap message:
ClickOK,
The image is added to the bottom of the table of contents.
Click and drag the source image to the top of the table of contents.
-
7/29/2019 Membuat Georeferen ArcMap
12/19
Georeferencing Images in ArcMap CGA, March 21, 2008
12
ClickView > Toolbars > Georeferencing Toolbar,
Zoom the map to the general area your image covers.ClickGeoreferencingand clickFit To Display,
This will display the source image in the same area you are zoomed into.
Click the right mouse button on the source image in the table of content,
Select Properties,
Click the Displaytab in the Layer Propertieswindow,
Type 30 in the Transparency to display the image with a 30% transparency.
ClickOK.
Source image at the top ofthe table of contents
-
7/29/2019 Membuat Georeferen ArcMap
13/19
Georeferencing Images in ArcMap CGA, March 21, 2008
13
Now it is time to match features in the image with those on the GIS layer. A
minimum of 4 identical points are required, preferably one on each corner of the
map. Adding more than 4 may improve the georeferencing result.
Zoom into the first matching feature on your source image,
ClickAdd Control Pointto add a control point
Click the left mouse button on the feature in the image to add the first coordinate.
When adding control points, choose discrete features visible in both the image and
GIS layer. For example: road intersections, narrow tips of islands, etc. Zoom in and
click as accurately as you can when adding control points.
-
7/29/2019 Membuat Georeferen ArcMap
14/19
Georeferencing Images in ArcMap CGA, March 21, 2008
14
Zoom outuntil the same feature on the GIS layer is visible.
Zoom into the same feature on the GIS layer.
ClickAdd Control Point,
Click the left mouse button on the same feature in the GIS layer to assign the first
coordinate.
After clicking, the source image will move, and align itself with the GIS layer based
on the control point you added.
ClickView Link Table,
The first control point appears on the list in the View Link Table,with the map
coordinates automatically added.
The first image control po int
-
7/29/2019 Membuat Georeferen ArcMap
15/19
Georeferencing Images in ArcMap CGA, March 21, 2008
15
Zoom into the second matching feature on your source data,
ClickAdd Control Pointto add a control point,
Click the left mouse button over the feature in the unreferenced image to add the
second coordinate.
-
7/29/2019 Membuat Georeferen ArcMap
16/19
Georeferencing Images in ArcMap CGA, March 21, 2008
16
Zoom out until the same feature on the GIS layer is visible.
Zoom into the second matching feature on your GIS layer,
ClickAdd Control Point,
Click the left mouse button over the same feature in the referenced image to add the
second coordinate.
ClickView Link Table,
The second control point appears on the list in the View Link Table.
The second imagecontrol point
-
7/29/2019 Membuat Georeferen ArcMap
17/19
Georeferencing Images in ArcMap CGA, March 21, 2008
17
Repeat this procedure to add a third and fourth control point.
-
7/29/2019 Membuat Georeferen ArcMap
18/19
Georeferencing Images in ArcMap CGA, March 21, 2008
18
ClickGeoreferencingand clickRectifyto save,
Accept Cell Sizevalue,
Choose Resample Type >Nearest neighbor (for discrete data) generally this
is the best choice.
Type the name of the georeferenced raster in the Namebox,
1. Poin t
2. Poin t
3. Poin t
4. Point
-
7/29/2019 Membuat Georeferen ArcMap
19/19
Georeferencing Images in ArcMap CGA, March 21, 2008
19
Click Save and a new file with the name specified will be created, along with an
associated .aux file that contains the coordinate information.
ClickAdd Data,
Browse to the newly created raster in theAdd Datawindow,
Select it, and clickOpen,
ClickYesin the Create Pyramids, dialog box, and the georeferenced raster will be
added to the map.