media tube cw - vetasled.com uses automatically binned leds on its products, thereby minimizing...

This product is NOT suitable for coastal environments. Any such installation will void the product warranty.LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product, LED manufacturers “sort” LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range.As with all electronic devices, LED output degrades over time – a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degrade is a complicate function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in respective product literature.

WWW.TRAxONTECHNOLOgIES.COm©2012 TRAxON TECHNOLOgIES ALL RIgHTS RESERvED. TRAxON™, Tx CONNECT®, LuxILED™ ARE TRADEmARkS Of TRAxON TECHNOLOgIES. u.S. pATENTS, E.u. pATENTS, jApAN pATENTS, OTHER pATENTS pENDINg. SpECIfICATIONS ARE SuBjECT TO CHANgE WITHOuT NOTICE.

08/12 v0.6

media Tube CW

Tu.CR.0364003Tu.CR.0064003Tu.CR.0164003Tu.CR.0264003Tu.DR.0364003Tu.DR.0064003Tu.DR.0164003Tu.DR.0264003

The Traxon media Tube CW is an Ip66-rated slim LED tube for any wall or façade media lighting. Available in 295mm, 495mm, 995mm, and 1495mm lengths, the simple but robust construction, allows up to 16m of Tubes to be daisy chained on a single power run.

pRODuCT SpECIfICATIONS

• Models: Tu.CR.0364003 – 12pxL media Tube CW Direct view 295 Tu.CR.0064003 – 20pxL media Tube CW Direct view 495 Tu.CR.0164003 – 40pxL media Tube CW Direct view 995 Tu.CR.0264003 – 60pxL media Tube CW Direct view 1495 Tu.DR.0364003 – 12pxL media Tube CW Diffused 295 Tu.DR.0064003 – 20pxL media Tube CW Diffused 495 Tu.DR.0164003 – 40pxL media Tube CW Diffused 995 Tu.DR.0264003 – 60pxL media Tube CW Diffused 1495

• Light Source: 12, 20, 40, or 60 High intensity SmD Cold White LEDs

• Color Temperature: 6500 k - Cold white

• Beam Angle: 120° (Direct view) / 180° approx. (Diffused)

• Luminous Flux1: 386.65 lm

• Efficacy1: 32.2 lm/W

• Cover Lens: pC Diffuser, cast-uv protected (Diffused version only)

• LED Pitch: 25mm

• Housing: Aluminium housing with clear silicone potting / pC cover (Diffused version only)

• Adjustment Options: –• Size: Direct view: 12pxL, 20pxL, 40pxL, 60pxL: 295mm/495mm/995mm/1495mm (L) x 28.5mm (W) x 28mm (H) / 11.6”/19.5”/39.2”/58.9” (L) x 1.12” (W) x 1.10” (H) Diffused: 12pxL, 20pxL, 40pxL, 60pxL: 295mm/495mm/995mm/1495mm (L) x 28.5mm (W) x 48.5mm (H) / 11.6”/19.5”/39.2”/58.9” (L) x 1.12” (W) x 1.91” (H)• Weight: 12pxL:0.59kg/1.3lbs, 20pxL: 0.8kg/1.8lbs, 40pxL: 1.6kg/3.5lbs, 60pxL: 2.3kg/5.1lbs (Direct view) 12pxL:0.48kg/1.1lbs, 20pxL: 0.65kg/1.4lbs, 40pxL: 1.3kg/2.9lbs, 60pxL: 1.95kg/4.3lbs (Diffused)

• Regulatory Listing & Safety Approval: CE (pending), cETLus (pending)

• Operating Temperature: –30°C to +50°C / –22°f to +122°f

• Storage Temperature: –40°C to +70°C / –40°f to +158°f

• Environment: Outdoor, Ip67 (Direct view); Outdoor, Ip66 (Diffused)

• Humidity: 0~90%, non-condensing

ELECTRICAL SpECIfICATIONS

• Operating Voltage: 48v DC

• Power Consumption: 12pxL: 4.5W max., 20pxL: 6W max., 40pxL: 12W max., 60pxL: 18W max. (~12W per meter)

SySTEm SpECIfICATIONS

• Power/Data Interface: Tx CONNECT

• Control: Dmx512 / e:pix (DvI capable)

• Power Supply: LED Engine 1000W 48v Indoor / LED Engine 240W 48v Outdoor (pS.OB.0011000)

• Addressing Options: Auto-Addressing (1 Dmx512 channel per pixel)

1. Based on photometric data and maximum power consumption of media Tube CW Direct view 995mm

media Tube CW


08/12 v0.6

Photometrics

SOuRCE SpECIfICATIONS

Source: High intensity power light emitting diodes 40 LEDs

Optics: 120°

Cover Lens: None – Clear silicone potting (Direct view)

CCT: 6500 k – Cold white

CANDELA DISTRIBuTION LIgHT OuTpuT

Color Luminous Flux (lm)

White 386.65

ILLumINANCE AT A DISTANCE

IES and LDT files are available for download from the Traxon website

Center Beam LUX Beam WidthHV

2m 39.42 5.0m 5.1m

4m 9.85 10.1m 10.3m

6m 4.38 15.1m 15.4m

8m 2.46 20.2m 20.5m

10m 1.58 25.2m 25.7m

12m 1.09 30.3m 30.8m

For fc divide by 10.7

For feet multiply by 3.28

Vert.Spread: 103.3°

Horiz.Spread: 104.2°

0° 15° 30° 45°

90°

75°

60°

31.54

Cd: 0

63.07

94.61

126.14

157.68

media Tube CW


08/12 v0.6

Photometrics



Optics: 180° approx.

Cover Lens: pC Diffuser, cast-uv protected (Diffused)

CCT: 6500 k – Cold white



White 247.22



0° 15° 30° 45°

90°

105°

75°

60°

Cd: 0

31.95

42.61

53.26

10.65

21.30


2m 13.31 5.9m 86.9m

4m 3.33 11.7m 173.7m

6m 1.48 17.6m 260.6m

8m 0.83 23.5m 347.4m

10m 0.53 29.4m 434.3m

12m 0.37 35.2m 521.1m





media Tube CW


08/12 v0.6

Dimensions

TECHNICAL DRAWINg

Media Tube CW – Direct View

Media Tube CW – Diffused

DETAIL A

See DETAIL A

28m

m/1

.10”

28.5mm/1.12”

33mm/1.30”

495mm/19.5” / 995mm/39.2” / 1495mm/58.9”

140mm/5.5” 140mm/5.5”

15mm/0.6”

295mm/11.6”

59.5mm/2.3”

NOTE THE PLACEMENT OF THE MOUNTING BRACKET DIFFERS TO THAT OF THE LONGER TUBES

59.5mm/2.3”

140mm/5.5” 140mm/5.5”

15mm/0.6”

DETAIL B

See DETAIL B

28.5mm/1.12”

48.5

mm

/1.9

1”

33mm/1.30”

495mm/19.5” / 995mm/39.2” / 1495mm/58.9”

295mm/11.6”

59.5mm/2.3”


59.5mm/2.3”

media Tube CW


08/12 v0.6

Mounting

TECHNICAL DRAWINg

55m

m/2

.17”

DIRECT VIEW TUBE

43.5mm/1.71”

75.5

mm

/2.9

7”

43.5mm/1.71”

DIFFUSED TUBE

FRONT MOUNTING

295mm TUBE MOUNTING

REAR MOUNTING

M10 x 1.5P x 10mm

M10 x 1.5P x 10mm

Cable fits inside mounting bracket

media Tube CW


08/12 v0.6

System Diagram

SySTEm DIAgRAm

FUSE

–+

FUSE

FUSE

–+

FUSE

FUSE

–+

FUSE

Inte

rcon

nect

ion

Exam

ple:

WA

GO

® te

rmin

al b

lock

s on

35m

m w

ide

DIN

rail

CA

T5 D

ATA

CA

BLE

(UTP

AW

G24

)

Max

imum

8 o

utpu

tsM

axim

um 1

536

chan

nels

per

out

put

48V

DC

GN

D

DM

X+D

MX–

Pin

3: G

ND

RJ4

5 P

lug

Pin

2: D

MX+

Pin

1: D

MX–

TUB

ES

AR

E D

AIS

Y C

HA

INE

D

TUB

E IN

TER

CO

NN

EC

TIO

N

Star

ter C

able

M12

End

Cap

DO

.AC

.000

0800

PO

WE

R IN

JEC

TIO

N

281-

611/

281-

542

WA

GO

® P

art n

o.

281-

656

and

281-

512/

281-

416

(Fus

e bl

ock)

280-

901

Dai

sy-c

hain

ed L

ED

Tub

esM

ax. 6

80 L

ED

s(e

.g. 1

7x 1

m 4

0-LE

D tu

bes*

)To

tal 6

80 D

MX5

12 c

hann

els

CA

BLE

A

1939

4600

00(W

eidm

ülle

r)TU

.AC

.000

0300

Pow

er D

istr

ibut

ion

Blo

cks

Pow

er d

istr

ibut

ion

bloc

k to

Wag

o Te

rmin

al B

lock

AW

G12

~14

(1m

max

)

CA

BLE

D

CA

BLE

C

CA

BLE

B

PO

WE

R: A

WG

18D

ATA

: AW

G24

Tube

Sta

rter

Cab

le

Inte

rcon

nect

ion

cabl

e

This

wiri

ng d

iagr

am s

how

s on

ly ty

pica

l con

nect

ions

. Act

ual w

iring

dep

ends

on

LED

Tub

e co

nfig

urat

ion

and

inst

alla

tion.

*Max

. no.

fixt

ures

var

y ac

cord

ing

to c

able

leng

ths.

Ple

ase

cons

ult y

our

loca

l Tra

xon

offic

e fo

r ai

d.

M12

Pow

er/D

ata

Inje

ctor

Cab

leTU

.AC

.000

0101

Mea

nwel

l Pow

er S

uppl

y U

nit 3

x 48

V D

C 1

kWLE

D E

ngin

e 10

00W

48V

- s

ingl

e te

rmin

alP

S.IE

.001

1100

PS

U R

ack

for

LED

Eng

ine

1000

W 4

8V(H

ouse

s 3

x P

S.IE

.001

1100

)P

S.A

C.0

5001

00

BA

CK

3x 1

kW R

ackm

ount

PS

Uca

n po

wer

up

to 9

01m

-leng

th 4

0-LE

D tu

bes

Rin

g co

nnec

tors

to fi

t M5

term

inal

on P

SU

249-

117

(End

sto

pper

)

(cov

er p

late

)28

0-30

9

281-

335

(cov

er p

late

)

(cov

er p

late

)28

1-30

9

Fuse

:6A

Slo

w b

low

Ø5

x 20

mm

(TU

.AC

.990

0000

100

pcs)

Dai

sy-c

hain

ed V

MC

sM

ax. u

nits

per

cha

in: 8

Use

DV

I spl

itter

for

furt

her

VM

C c

hain

See

VM

C s

peci

ficat

ion

for

mor

e in

form

atio

n

AW

G0~

6

Not

e: M

arki

ngs

on

Wag

o® te

rmin

al

bloc

ks in

dica

te

pola

rity

of fu

se

bloc

ks.

Con

nect

ion

poin

t ob

scur

ed b

y fu

se b

lock

From

Pow

er/D

ata

sour

ceTo

fixt

ure

+–

DVI

So

urce

Ethe

rnet

Sour

ce

DVI

IN (D

VI-D

/DVI

-I)

DVI

IN (D

VI-D

/DVI

-I)

DVI

OU

T

DVI

OU

T

Ethe

rnet

Sw

itch Vi

deo

Mic

ro C

onve

rter (

VMC

)16

0185

LCEf

xEN

.LC

.910

0001

Cab

le C

(AW

G 1

8) L

engt

h (m

)

CA

BLE

A a

nd C

AB

LE C

rel

atio

nshi

p

Cable A (AWG 5/8/10) Length (m)

CA

BLE

B +

CA

BLE

C m

ax. l

engt

h: 1

00m

10x 1

m tu

bes

7x 1

.5m

tube

s50100

150

200

250

300

3035

2520

1510

50

AW

G 5

AW

G 5

AW

G 8

AW

G 1

0

AW

G 1

0

AW

G 8

GN

DD

MX+

DM

X–

Wag

o® T

erm

inal

blo

ck s

et

TU.A

C.0

0002

00

Sig

nal

48V

DM

X–

Gro

und

DM

X+

Wire

Siz

e

AWG

18

AWG

24

AWG

18

AWG

24

Col

or

Bro

wn

Whi

te

Blu

e

Bla

ckFor

CA

BLE

C

Inje

ctin

g po

wer

for

next

dai

sy c

hain

.

media Tube CW


08/12 v0.6

Accessories

STANDARD ACCESSORIES (included in delivery)

Model No. Description

2 x Tube mounting Bracket & mounting plate and 4 x CSk Head Screw m3x12

OpTIONAL ACCESSORIES


DO.AC.0000800 Connector End Cap m12

Tx CONTROL


160185 video micro Converter (Dmx/e:pix)

160194 video micro Converter garage (Optional)

EN.Bx.0000001 Butler xT2

160098 Butler xT

160174 Butler xT garage (Optional)

160001 Butler

160052 Butler garage (Optional)

EN.LC.9100001 Lighting Control Engine fx (LCEfx)

Tx CONNECT


Tu.AC.0001201 m12 Starter Cable (Open Wire), 5m (18 AWg)


Tu.AC.0001101 m12 Starter Cable, 35m (18 AWg)

DO.AC.1000001 m12 Interconnection Cable, 140mm

Tu.AC.0200201 m12 Interconnection Cable, 1.5m (18 AWg)

Tu.AC.0200101 m12 Interconnection Cable, 4m (18 AWg)

Tu.AC.0000100 m12 power/Data Injector Cable

Tu.AC.0000200 WAgO Terminal Block set

Tu.AC.9900000 6A SB fuse (100pcs)

Tx pOWER


pS.IE.0011100 LED Engine 1000W Indoor 48v

pS.AC.0500100 LED Engine garage (for 3 pcs 1000W Indoor pSu)

pS.OB.0011000 LED Engine 240W Outdoor 48v

This product is NOT suitable for coastal environments. Any such installation will void the product warranty.LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product, LED manufacturers “sort” LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range.As with all electronic devices, LED output degrades over time – a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degrade is a complicate function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in respective product literature.


08/12 v0.6

media Tube WW

Tu.CR.0374003Tu.CR.0074003Tu.CR.0174003Tu.CR.0274003Tu.DR.0374003Tu.DR.0074003Tu.DR.0174003Tu.DR.0274003

The Traxon media Tube WW is an Ip66-rated slim LED tube for any wall or façade media lighting. Available in 295mm, 495mm, 995mm, and 1495mm lengths, the simple but robust construction, allows up to 16m of Tubes to be daisy chained on a single power run.

pRODuCT SpECIfICATIONS

• Models: Tu.CR.0374003 – 12pxL media Tube WW Direct view 295 Tu.CR.0074003 – 20pxL media Tube WW Direct view 495 Tu.CR.0174003 – 40pxL media Tube WW Direct view 995 Tu.CR.0274003 – 60pxL media Tube WW Direct view 1495 Tu.DR.0374003 – 12pxL media Tube WW Diffused 295 Tu.DR.0074003 – 20pxL media Tube WW Diffused 495 Tu.DR.0174003 – 40pxL media Tube WW Diffused 995 Tu.DR.0274003 – 60pxL media Tube WW Diffused 1495

• Light Source: 12, 20, 40, or 60 High intensity SmD Warm White LEDs

• Color Temperature: 2700 k - Warm white

• Beam Angle: 120° (Direct view) / 180° approx. (Diffused)

• Luminous Flux1: 262.67 lm

• Efficacy1: 21.9 lm/W

• Cover Lens: pC Diffuser, cast-uv protected (Diffused version only)

• LED Pitch: 25mm

• Housing: Aluminium housing with clear silicone potting / pC cover (Diffused version only)

• Adjustment Options: –• Size: Direct view: 12pxL, 20pxL, 40pxL, 60pxL: 295mm/495mm/995mm/1495mm (L) x 28.5mm (W) x 28mm (H) / 11.6”/19.5”/39.2”/58.9” (L) x 1.12” (W) x 1.10” (H) Diffused: 12pxL, 20pxL, 40pxL, 60pxL: 295mm/495mm/995mm/1495mm (L) x 28.5mm (W) x 48.5mm (H) / 11.6”/19.5”/39.2”/58.9” (L) x 1.12” (W) x 1.91” (H)• Weight: 12pxL:0.59kg/1.3lbs, 20pxL: 0.8kg/1.8lbs, 40pxL: 1.6kg/3.5lbs, 60pxL: 2.3kg/5.1lbs (Direct view) 12pxL:0.48kg/1.1lbs, 20pxL: 0.65kg/1.4lbs, 40pxL: 1.3kg/2.9lbs, 60pxL: 1.95kg/4.3lbs (Diffused)

• Regulatory Listing & Safety Approval: CE (pending), cETLus (pending)

• Operating Temperature: –30°C to +50°C / –22°f to +122°f

• Storage Temperature: –40°C to +70°C / –40°f to +158°f

• Environment: Outdoor, Ip67 (Direct view); Outdoor, Ip66 (Diffused)

• Humidity: 0~90%, non-condensing

ELECTRICAL SpECIfICATIONS

• Operating Voltage: 48v DC

• Power Consumption: 12pxL: 4.5W max., 20pxL: 6W max., 40pxL: 12W max., 60pxL: 18W max. (~12W per meter)

SySTEm SpECIfICATIONS

• Power/Data Interface: Tx CONNECT

• Control: Dmx512 / e:pix (DvI capable)

• Power Supply: LED Engine 1000W 48v Indoor / LED Engine 240W 48v Outdoor (pS.OB.0011000)

• Addressing Options: Auto-Addressing (1 Dmx512 channel per pixel)

1. Based on photometric data and maximum power consumption of media Tube WW Direct view 995mm

media Tube WW


08/12 v0.6

Photometrics



Optics: 120°

Cover Lens: None – Clear silicone potting (Direct view)

CCT: 2700 k – Warm white



White 262.67




2m 28.32 4.7m 4.8m

4m 7.08 9.4m 9.6m

6m 3.15 14.1m 14.4m

8m 1.77 18.8m 19.2m

10m 1.13 23.5m 24.0m

12m 0.79 28.2m 28.8m



Vert.Spread: 99.3°


0° 15° 30° 45°

90°

75°

60°

22.66

Cd: 0

45.32

67.98

90.64

113.30

media Tube WW


08/12 v0.6

Photometrics



Optics: 180° approx.

Cover Lens: pC Diffuser, cast-uv protected (Diffused)

CCT: 2700 k – Warm white



White 187.3



0° 15° 30° 45°

90°

105°

75°

60°

Cd: 0

24.51

32.67

40.84

8.17

16.34


2m 10.21 5.7m 86.0m

4m 2.55 11.5m 172.0m

6m 1.13 17.2m 258.0m

8m 0.64 22.9m 344.0m

10m 0.41 28.7m 429.9m

12m 0.28 34.4m 515.9m





media Tube WW


08/12 v0.6

Dimensions

TECHNICAL DRAWINg

Media Tube WW – Direct View

Media Tube WW – Diffused

DETAIL A

See DETAIL A

28m

m/1

.10”

28.5mm/1.12”

33mm/1.30”

495mm/19.5” / 995mm/39.2” / 1495mm/58.9”

140mm/5.5” 140mm/5.5”

15mm/0.6”

295mm/11.6”

59.5mm/2.3”


59.5mm/2.3”

140mm/5.5” 140mm/5.5”

15mm/0.6”

DETAIL B

See DETAIL B

28.5mm/1.12”

48.5

mm

/1.9

1”

33mm/1.30”

495mm/19.5” / 995mm/39.2” / 1495mm/58.9”

295mm/11.6”

59.5mm/2.3”


59.5mm/2.3”

media Tube WW


08/12 v0.6

Mounting

TECHNICAL DRAWINg

55m

m/2

.17”

DIRECT VIEW TUBE

43.5mm/1.71”

75.5

mm

/2.9

7”

43.5mm/1.71”

DIFFUSED TUBE

FRONT MOUNTING

295mm TUBE MOUNTING

REAR MOUNTING

M10 x 1.5P x 10mm

M10 x 1.5P x 10mm

Cable fits inside mounting bracket

media Tube WW


08/12 v0.6

System Diagram

SySTEm DIAgRAm

FUSE

–+

FUSE

FUSE

–+

FUSE

FUSE

–+

FUSE

Inte

rcon

nect

ion

Exam

ple:

WA

GO

® te

rmin

al b

lock

s on

35m

m w

ide

DIN

rail

CA

T5 D

ATA

CA

BLE

(UTP

AW

G24

)

Max

imum

8 o

utpu

tsM

axim

um 1

536

chan

nels

per

out

put

48V

DC

GN

D

DM

X+D

MX–

Pin

3: G

ND

RJ4

5 P

lug

Pin

2: D

MX+

Pin

1: D

MX–

TUB

ES

AR

E D

AIS

Y C

HA

INE

D

TUB

E IN

TER

CO

NN

EC

TIO

N

Star

ter C

able

M12

End

Cap

DO

.AC

.000

0800

PO

WE

R IN

JEC

TIO

N

281-

611/

281-

542

WA

GO

® P

art n

o.

281-

656

and

281-

512/

281-

416

(Fus

e bl

ock)

280-

901

Dai

sy-c

hain

ed L

ED

Tub

esM

ax. 6

80 L

ED

s(e

.g. 1

7x 1

m 4

0-LE

D tu

bes*

)To

tal 6

80 D

MX5

12 c

hann

els

CA

BLE

A

1939

4600

00(W

eidm

ülle

r)TU

.AC

.000

0300

Pow

er D

istr

ibut

ion

Blo

cks

Pow

er d

istr

ibut

ion

bloc

k to

Wag

o Te

rmin

al B

lock

AW

G12

~14

(1m

max

)

CA

BLE

D

CA

BLE

C

CA

BLE

B

PO

WE

R: A

WG

18D

ATA

: AW

G24

Tube

Sta

rter

Cab

le

Inte

rcon

nect

ion

cabl

e

This

wiri

ng d

iagr

am s

how

s on

ly ty

pica

l con

nect

ions

. Act

ual w

iring

dep

ends

on

LED

Tub

e co

nfig

urat

ion

and

inst

alla

tion.

*Max

. no.

fixt

ures

var

y ac

cord

ing

to c

able

leng

ths.

Ple

ase

cons

ult y

our

loca

l Tra

xon

offic

e fo

r ai

d.

M12

Pow

er/D

ata

Inje

ctor

Cab

leTU

.AC

.000

0101

Mea

nwel

l Pow

er S

uppl

y U

nit 3

x 48

V D

C 1

kWLE

D E

ngin

e 10

00W

48V

- s

ingl

e te

rmin

alP

S.IE

.001

1100

PS

U R

ack

for

LED

Eng

ine

1000

W 4

8V(H

ouse

s 3

x P

S.IE

.001

1100

)P

S.A

C.0

5001

00

BA

CK

3x 1

kW R

ackm

ount

PS

Uca

n po

wer

up

to 9

01m

-leng

th 4

0-LE

D tu

bes

Rin

g co

nnec

tors

to fi

t M5

term

inal

on P

SU

249-

117

(End

sto

pper

)

(cov

er p

late

)28

0-30

9

281-

335

(cov

er p

late

)

(cov

er p

late

)28

1-30

9

Fuse

:6A

Slo

w b

low

Ø5

x 20

mm

(TU

.AC

.990

0000

100

pcs)

Dai

sy-c

hain

ed V

MC

sM

ax. u

nits

per

cha

in: 8

Use

DV

I spl

itter

for

furt

her

VM

C c

hain

See

VM

C s

peci

ficat

ion

for

mor

e in

form

atio

n

AW

G0~

6

Not

e: M

arki

ngs

on

Wag

o® te

rmin

al

bloc

ks in

dica

te

pola

rity

of fu

se

bloc

ks.

Con

nect

ion

poin

t ob

scur

ed b

y fu

se b

lock

From

Pow

er/D

ata

sour

ceTo

fixt

ure

+–

DVI

So

urce

Ethe

rnet

Sour

ce

DVI

IN (D

VI-D

/DVI

-I)

DVI

IN (D

VI-D

/DVI

-I)

DVI

OU

T

DVI

OU

T

Ethe

rnet

Sw

itch Vi

deo

Mic

ro C

onve

rter (

VMC

)16

0185

LCEf

xEN

.LC

.910

0001

Cab

le C

(AW

G 1

8) L

engt

h (m

)

CA

BLE

A a

nd C

AB

LE C

rel

atio

nshi

p

Cable A (AWG 5/8/10) Length (m)

CA

BLE

B +

CA

BLE

C m

ax. l

engt

h: 1

00m

10x 1

m tu

bes

7x 1

.5m

tube

s50100

150

200

250

300

3035

2520

1510

50

AW

G 5

AW

G 5

AW

G 8

AW

G 1

0

AW

G 1

0

AW

G 8

GN

DD

MX+

DM

X–

Wag

o® T

erm

inal

blo

ck s

et

TU.A

C.0

0002

00

Sig

nal

48V

DM

X–

Gro

und

DM

X+

Wire

Siz

e

AWG

18

AWG

24

AWG

18

AWG

24

Col

or

Bro

wn

Whi

te

Blu

e

Bla

ckFor

CA

BLE

C

Inje

ctin

g po

wer

for

next

dai

sy c

hain

.

media Tube WW


08/12 v0.6

Accessories

STANDARD ACCESSORIES (included in delivery)


2 x Tube mounting Bracket & mounting plate and 4 x CSk Head Screw m3x12

OpTIONAL ACCESSORIES


DO.AC.0000800 Connector End Cap m12

Tx CONTROL


160185 video micro Converter (Dmx/e:pix)

160194 video micro Converter garage (Optional)

EN.Bx.0000001 Butler xT2

160098 Butler xT

160174 Butler xT garage (Optional)

160001 Butler

160052 Butler garage (Optional)

EN.LC.9100001 Lighting Control Engine fx (LCEfx)

Tx CONNECT




Tu.AC.0001101 m12 Starter Cable, 35m (18 AWg)

DO.AC.1000001 m12 Interconnection Cable, 140mm

Tu.AC.0200201 m12 Interconnection Cable, 1.5m (18 AWg)

Tu.AC.0200101 m12 Interconnection Cable, 4m (18 AWg)

Tu.AC.0000100 m12 power/Data Injector Cable

Tu.AC.0000200 WAgO Terminal Block set

Tu.AC.9900000 6A SB fuse (100pcs)

Tx pOWER


pS.IE.0011100 LED Engine 1000W Indoor 48v

pS.AC.0500100 LED Engine garage (for 3 pcs 1000W Indoor pSu)

pS.OB.0011000 LED Engine 240W Outdoor 48v

media tube cw - vetasled.com uses automatically binned leds on its products, thereby minimizing...

Documents