E 18

.363

.2/1

1.13

389

17

Mechanical Accessories

Connection accessories for pressure sensors

ZBM 01Adapter female thread G1/4 – male thread G1/2 B, DIN EN 837-1Part No.: 257276

ZBM 13Adapter female thread G1/4 - male thread G1/4 A, with orifice 0.5 mm Part No.: 906968

ZBM 14Adapter female thread G1/4 - male thread G1/4 (rotating)Part No.: 907818

hex. SW27

flat seal ring 6.2x17.5x2.0

hex. SW27

elastomer seal ring DIN3869

orifice

hex. SW19

elastomer seal ring DIN3869

ZBM 02Adapter female thread G1/4 – male thread G1/2 A, DIN 3852 Part No.: 257277 hex. SW27

O-ring 20.35x1.78 -NBR

E 18

.363

.2/1

1.13

390

17

ZBM 8000Clamp for wall-mounting - screw-type fitting -

(Material of lower section: TPE Santoprene 10187; Material of top section: Steel strip DIN 95381-1.4571)

Part No.: 3546755

Mounting accessories, device-specific EDS 8000, HDA 8000; EDS 810

ZBM 8100Clamp for wall-mounting - weld-type fitting -

(Material of welding bridge: QSTE340TM, zinc coating EN 12329 FE/ZN8/B; Material of lower section: TPE Santoprene 10187; Material of top section: Steel strip DIN 95381-1.4571)

Part No.: 3546757

hex. socket cap screw. ISO4762

hex. socket cap screw. ISO4762

E 18

.363

.2/1

1.13

391

17

ZBM 3000Clamp for wall-mounting - screw-type fitting -

(Material of lower section: TPE Santoprene 10187; Material of top section: Steel strip DIN 95381-1.4571)

Part No.: 3184630

Mounting accessories, device-specific EDS 3000, ETS 3000, AS 3000, ENS 3000 and HNS 3000

ZBM 3100Clamp for wall-mounting - weld-type fitting -

(Material of welding bridge: QSTE340TM, zinc coating EN 12329 FE/ZN8/B; Material of lower section: TPE Santoprene 10187; Material of top section: Steel strip DIN 95381-1.4571)

Part No.: 3184632

ZBM 3200Splash guard

(Material: Elastollan S60 A15 SPF 000)

Part No.: 3201919

hex. socket cap screw. ISO4762

hex. socket cap screw. ISO4762

E 18

.363

.2/1

1.13

392

17

ZBM 300Clamp for wall-mounting - screw-type fitting -(Material polypropylene)Part No.: 906385

Mounting accessories, device-specific EDS 300, ETS 300

ZBM 310Clamp for wall-mounting - weld-type fitting -(Material polypropylene, aluminium AlSi12, steel)Part No.: 6011511

hex. socket cap screw ISO4762

E 18

.363

.2/1

1.13

393

17

Vibration mountsPart No.: 257492

Mounting accessories, device-specific EDS 1700, ETS 1700

Mounting kit EDS 601 - for front panel mounting-(St4K32 DIN 1544)Part No.: 905404

Mounting accessories, device-specific EDS 601

E 18

.363

.2/1

1.13

394

17

Protective sleeve for tank-mounting(Material CuZn39Pb3 - DIN 1763, electro-nickel-plated)Part No.: 909640

Tank mounting sleeve , device-specific ETS 3000 (100 mm)

lock nut SW41

Connection accessories, device-specific ENS 3000

ZBM 19Straight bulkhead union ISO 8434Part No.: 908738Note: Not suitable for ENS with 250 mm probe length

ZBM 20Straight male stud coupling to ISO 8434Part No.: 908739

compression nut (SW36) ISO8434-1-N-L22-St

seal ring Cu DIN7603-A 30x36SW36

appr

ox.

compression nut (SW36) ISO8434-1-N-L22-St

SW32

hex-SW27

E 18

.363

.2/1

1.13

395

17

Mounting block, device-specific HLB 1300

Connection accessories, device-specific AS 1000, AS 3000

ZBM 22 Mounting block for AquaSensor AS 1000 and AS 3000Part No.: 3248511

ZBM 21 (Flow)Mounting block for HLB 1300 for flow rates > 2 l/min Part No.: 3244260

ZBM 23 (Low Flow)Mounting block for HLB 1300 for flow rates from 0.5 .. 10 l/min Part No.: 3299331

E 18

.363

.2/1

1.13

396

17

HYDAC ELECTrONIC GMBH Hauptstraße 27, D-66128 Saarbrücken Telephone +49 (0)6897 509-01 Fax +49 (0)6897 509-1726 E-mail: electronic@hydac.com Internet: www.hydac.com

Note:The information in this brochure relates to the operating conditions and applications described.For applications or operating conditions not described, please contact the relevant technical department.Subject to technical modifications.