April- 2016

MECH-Rays

MECHANICAL DEPT NEWS LETTER

QIS COLLEGE OF ENGINEERING & TECHNOLOGY(AUTONOMOUS) (ApprovedbyAICTE,PermanentlyAffiliatedtoJNTUK,Kakinada-AccreditedbyNBA-UGCRecognized)

Vengamukkapalem,ONGOLE-523272.Ph:08592-281023,Cell:9246419542,Fax:281323

Volume:

MEA’S PHONTOM’17 held on Oct 17

Seminar on advance teaching methodologies conducted by Prof. Dr. Y Sesha Rao

JAN- 2018

III year students collecting trophy from

Dr. K Veeraswamy, Principal, QISCET

Seminar onHow to publish research paper conducted by Prof. Dr. A Ramesh Kumar

Secretary and Correspondent’s

Message

I am delighted to know that our mechanical department newsletter is being released. On this gracious occasion, I wish all the best to those who are responsible for bringing out this letter. I congratulate Prof Dr.Y Sesho Rao, HoD, for initiating this newsletter. I wish the same commitment from the entire faculty to do research in an advanced level and bringlaurels.

I congratulate the students who were selected to tournaments and in placements. I wish

all the outgoing students to have a successful career and anticipate that they will sustain

the college name and reputation.

Principal’s Message

I am happy to note that the editorial board brings out newsletter for the period October

to December 2017. It is great to find a considerable number of winners and participants

in co-curricular and extracurricular activities which certainly prove that our staff and

students are adequately equipped and possess necessary skill-sets to bring such laurels to

the institution. In QISCET, the year complemented with the blend of curricular and co-

curricular activities.

I congratulate Mr.SATHISH KUMAR, Assistant .Professor, for getting PhD admission

inVTUBelagavi, Karnataka.I appreciate the faculty members for publishing a good

number of research papers in National and International journals.

HOD’S Message

I am delighted to know that our department newsletter is being released. On this gracious occasion, I wish all the best to those who are responsible for bringing out this letter. I congratulate all the faculty members for initiating this newsletter. I wish the same commitment from the entire faculty to do research in an advanced level and bringlaurels.

I congratulate the students who were selected to tournaments and in placements. I

wish all the outgoing students to have a successful career and anticipate that they will

sustain the college name and reputation.

Inspiration Column:

Kumar Bhattacharyya

Kumar Bhattacharyya is an Anglo-Indian engineer, educator and government advisor.

He founded the Warwick Manufacturing Group (WMG), an academic department at

the University of Warwick, which provides research, education and knowledge

transfer in engineering, manufacturing and technology. He was made a life peer of

the group in 2004, and serves as a director in WMG. Born in Dhaka in British-India,

he displayed a high level of intelligence from a young age and was brilliant in

studies.

Bhattacharyya studied Mechanical Engineering at the Indian Institute of Technology,

Kharagpur. He moved to Britain in the 1960s where he worked for six years as a

graduate apprentice at Lucas Industries, a large British manufacturing company.

During this time, he studied at the University of Birmingham where he attained an

MSc in Engineering Production and Management and a PhD in Engineering

Production. While completing his PhD at Birmingham, he was appointed as a

Lecturer and began the process of establishing a manufacturing education programme

for industry environment in Britain.

Mr Satish Kumar Asst. Professor congratulated by Dr. Sesha Rao Professor & HoD Mechanical Engineering for getting admission to VTU, Belagavi, Karnataka.

Mr. Chandra Sekhar Associsate Professor presenting his paper “EXPERIMENTAL INVESTIGATION ON PERFORMANCE CHARACTERISTICS OF ALUMINUM ELECTRODES USING A DEVELOPED MICRO ECM METHOD” at International confernace held at SRM University.

Seminar

A seminar on how to write research paper and how

to find topic for PhD work was explained by Dr.

Ramesh Kumar, Professor, Dept. of Mechanical

Engineering, QISCET.

Seminar on innovative teaching methodologies

was conducted by Prof. Dr.Sesha Rao, HoD,

Dept.of Mechanical Engineering, QISCET.

INTERNATIONAL JOURNALS

1. S K Althaf Ahmed, G.V.V.S.Vara Prasad “Performance Analysis on 4-strokesingle Cylinder Diesel Engine using B-20 Jathropa Bio- diesel blend &Ethanol as an Air Additive” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 10, October 2017, ISSN(Online): 2319-8753 ISSN (Print):2347-6710.

2. Tammisetty.Brahmaiah & Abhishek Kumar, “Experimental Investigation Of A Diesel Engine Using Nerium Oil As Alternative Fuel” International Journal of Research, Volume 04 Issue 13 October 2017, e-ISSN: 2348-6848 p-ISSN: 2348-795X.

3. NAJEER MATTIPATI, K.CHANDRA SEKHAR, “Cfd Analysis of Helically Coiled Tube for Compact Heat Exchangers” International Journal of Research, Volume 04 Issue 13 October 2017, e-ISSN: 2348-6848 p-ISSN: 2348-795X.

4. Chilaka Ramesh Babu, Sk.Masthan Shareef, “Flow Test to Analyze Fuel Filter Element of an Aircraft” International Journal for Modern Trends in Science and Technology, Volume: 03, Issue No: 10, October 2017, ISSN: 2455-3778.

5. K. Ravi1 , Dr.A.Ramesh Kumar, “Experimental Investigation of C.I Engine Fuelled with the Blends of Rubber Seed Oil Methyl Esters and Diesel by Varying Injection Timing”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 10, October 2017, ISSN(Online): 2319-8753 ISSN (Print):2347-6710.i

6. B. Siva Shanker, Dr. A. Ramesh Kumar, “Experimental Investigation of C.I Engine Using Jathropa B20 Blend with Variable Pressures” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 10, October 2017, ISSN(Online): 2319-8753 ISSN (Print): 2347-67

7. CH. Sunil Choudary, M. Satish Kumar, “Energy Estimation and AnalysisofAgricultural Biomass Species & Land Requirement Calculation for 20000 kWh/day Power Plant”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 10, October 2017, ISSN(Online): 2319-8753 ISSN (Print): 2347 6710.

8. M. Mahesh, Dr. Y.Sesha Rao M.Tech.,Ph.D, “Mechanical Characterization of Hybrid Bamboo/E-Glass Fibre Reinforced Polymer Epoxy Composites”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 11, November 2017, ISSN(Online): 2319-8753, ISSN (Print): 2347-6710.

9. V. Manoj Kumar, T. Seshaiah M.E. (Ph.D.) “Investigation and Influence of MWCNTs/Graphene on the Mechanical Properties of Bi-Directionale-Glass/Epoxy Composite”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 11, November 2017, ISSN(Online): 2319-8753, ISSN (Print): 2347-6710.

10. A.Venkata Rathnam, U. Hari Babu, “OPTIMAL DESIGN AND ANALYSIS OF TWIN SHAFT SHREDDER”, INTERNATIONAL JOURNAL OF RESEARCH AND INNOVATION, Volume: IV, Issue: II, Paper Type: Review paper, Review Type: peer reviewed Year of publication: 2017.

INTERNATIONAL CONFERENCES

1. A.Ramesh Kumar, Chandra Sekhar and Satish Kumar,” PERFORMANCE AND EMISSION ANALYSIS OF BLENDS OF DIESEL AND RICE BRAN” presented in International Conference on Advances in Energy Research held at IIT Bombay.

2. Chandra Sekhar,” EXPERIMENTAL INVESTIGATION ON PERFORMANCE CHARACTERISTICS OF ALUMINUM ELECTRODES USING A DEVELOPED MICRO ECM METHOD.” presented in International Conference in held at SRM University.

V.SAI NARESH, IV MECH, Students Olympic Association of India National Meet (Volleyball) Held at Gujarat.

IV MECH students collecting trophy from Dr. K Veeraswamy, Principal, QISCET

M.V.RAMANA REDDY, P.SRINIVASA RAO, JNTU-K university kabaddi(men) selection trails held at V.V.I.T-guntur.

P.NAVEEN KUMAR, E.VAMSI KRISHNA volleyball team participated at Pace Engineering College.

CRT held for II and III year mechanical students in seminar hall

LIST OF STUDENTS SELECTED FOR ASHOK LEYLAND TECHNICAL ROUND

S.NO ROLL NO NAME

1 14491A03G1 PAINAM MAHESH KUMAR 2 14491A0342 SHAIK ABDUL RIYAZ 3 15495A0317 SUNNAMURI VENKATA SAI MANIKANTA 4 14491A0359 YATA.NAGENDRA BABU 5 14491A0315 VENKATA PAVAN KALYAN REDDY GODI 6 14491A0310 MANIKANTA DEVASANI 7 14491A0330 MUPPARAJU SIVARAMAKRISHNAPRASAD 8 14491A0308 DAGGUPATI HARISH 9 14491A0322 NAVEEN.KONDARU

10 14491A0362 KANCHIBHOTLA HIMA TEJA 11 14491A03C3 APPALASETTY LALITHKUMAR

Training and Placement Cell

QIS IN NEWS

Estd: 1997

QISEDUCATIONAL INSTITUTIONS Sponsored by Sri Nidamanuri Educational Society

Ongole, A.P

QIS – Quality Is Strength

AndhraPradesh,India. .

How to Reach QIS, Ongole

Nearest Airports- Vijayawada, Chennai,, Hyderabad

Nearest Port - Chennai

Nearest Railway Station- Ongole

Nearest Bus Station- Ongole

Ongole to Vijayavada-148K.m

Ongole to Guntur- 112K.m

Ongole to Hyderabad - 345K.m

Ongole to Vizag 500K.m

Ongole to Kurnool -258K.m

Ongole to Nellore-128K.m

Ongole- Tirupati- 281K.m

Ongole to Chennai- 308K.m

Ongole to Bangalore- 510K.m

Address for Correspondence

Principal – Dr. K. Veera Swamy – Cell No.9246419542

President – Sri N. Nageswara Rao - Cell No: 9849293405

ExecutiveChairman/Secretary&Correspondent–Sri.N.SuryaKalyanChakravarthy–CellNo.9949999977

Admission Coordinator – Mr. K. Anka Babu -9246419530

QIS COLLEGE OF ENGINEERING & TECHNOLOGY Pondur Road, Vengamukkapalem, Ongole, Prakasham District, A.P -523 272,

Ph: 08592-281023, Cell: 92464 19542, Fax: 281323, www.qiscet.edu.inE-mail: qiscet@hotmail.com