mdvr usser manual

8/18/2019 MDVR Usser Manual

1/24

MDVR

IPS700A Medical Digital Video Recorder

Installer User’s Guide

Before connecting, operating or adjusting this product, please

read this instruction booklet carefully and completely.


2/24FSN1949 - 01/20162 - English

Table of Contents

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Symbol Denitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

MDVR (IPS700A) Sample System Conguration . . . . . . . . . . 10

Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connect Input Sources . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connect Output to Video Display . . . . . . . . . . . . . . . . . . . 12

Connect Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connect Audio and Mechanical Switch . . . . . . . . . . . . . . . 13Connect a Remote Control Device . . . . . . . . . . . . . . . . . . 14

Methods of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Front Panel Control Keypad (OSD) . . . . . . . . . . . . . . . . . . 16

General Specication . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Mechanical Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Cleaning Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

The specications and information in this document are subject to change without notice.


3/24FSN1949 - 01/2016 English - 3

Overview

MDVR, part number IPS700A, is a medical digital video recorder from FSN Medical Technologies.

It is intended to record and store video and still images from operating devices for later playback

or transfer to other media.

MDVR is an advanced high quality video processing system that has built-in capabilities for

signal source selection and multiple resolutions. MDVR is controlled through an Android app. (for

RS232C or TCP/IP control, please consult the manufacturer).

Recording medical digital video is easy with MDVR. An accompanying control tablet runs the in-

tuitive user interface and gives quick access to options for setup, recording, capture, le storage,

patient information, play back, and data backup functions.

In addition, capture and recording can be controlled through an endoscopic camera head but-tons or a foot pedal accessory.

All recorded les are stored on MDVR’s internal hard disk drive. These stored les can then

be played back on a display monitor, or restored to variety of media including external drives,

memory sticks, DVDs, Blu‐ray disks, and network servers.

All MDVR inputs correspond with universal standards that accept VGA, DVI‐D (up to 1920x1080

resolution), composite video, and S‐video inputs.


4/24FSN1949 - 01/2016

4 - English

Symbol Denitions

The following symbols appear on the product, its labeling, or the product packing. Each symbol

carries a special denition, as dened below:

AC Voltage Switches on power

Switches off power Contained spare fuse

Dangerous : High VoltageConsult accompanying docu-

ments

Indicates protective earth

groundPower adapter

Indicates top-bottom

direction Serial Number

Do not get wet Manufacturer

Maximum Stacking Fragile

Humidity limitation Indicates the manufacturing date

Temperature limitation Atmospheric pressure limitation

Authorized representative in the European community

Representative in the USA Tested to comply with FCC

Class B standard.

Medical Equipment is in accordance with UL 60601-1 and CAN/CSA C22.2 No.

601.1 in regards to electric shock, re hazards, and mechanical hazard.

Indicates proof of conformity to applicable European Economic Community

Council directives and to harmonized standards published in the official jour-nal of the European Communities.

This symbol indicates that the waste of electronic equipment must not be

disposed as unsorted municipal waste and must be collected separately.

Please contact the manufacturer or other authorized disposal company to

decommission your equipment.

Refer to the instruction

manual / booklet.Equipotentiality.

Indicates the display is approved according to

the CCC regulations.

China RoHS labels.


5/24FSN1949 - 01/2016 English - 5

Safety and Instructions

Please read the following safety instructions as they are designed to prevent damage to property

and harm to the user.

Warning / Caution

Failure to follow directions noted by this symbol could result in bodily harm or dam-age to equipment.

Notational Conventions

Prohibited Important to read and understand at all times

Do not disassemble Disconnect the plus from outlet

Do not touch Grounding to prevent an electrical shock

Power

Use only a proper plug and voltage.

Improper power may cause electric shock or equipment damage.

To avoid the risk of electric shock, this equipment must only be connected to a

power supply with protective grounding.

Installation

Do not connect any other wires or accessories to this system which do not comply.An improper wire may cause electric shock or equipment damage.

Insert wires rmly so that they do not come loose.

A bad connection may cause fault.

Operating environment

Be sure to contact this product’s supplier when installing your system in a location

with heavy dust, high or low temperatures, high humidity, or chemical sub-

stances.

Failure to do so may cause serious damage to your system.

Others

If this system does not operate normally, in particular, if there are any unusual

sounds or smells coming from it, unplug it immediately.

Please contact supplier when you want to use this system with unknown equip-

ment. Please power off and pull out the power cord when you want to move thissystem.


6/24FSN1949 - 01/20166 - English

Caution

CAUTIONRISK OF ELECTRICAL SHOCK

DO NOT OPEN

This symbol alerts the user that important literature concerning the operation of this unithas been included. Therefore, it should be read carefully in order to avoid potential problems.

This symbol warns the user that un-insulated voltage within the unit may have sufficient

magnitude to cause electrical shock. Therefore, it is dangerous to make contact with any part

inside the unit.

To reduce the risk of electric shock, DO NOT remove cover (or back). There are no user service-

able parts inside. Refer servicing to qualied service personnel.

To prevent re or shock hazards, do not expose this unit to rain or moisture. Also, do not use this

unit’s polarized plug with an extension cord receptacle or other outlets unless the prongs can be

fully inserted.

The equipment is designed to meet the medical safety requirements for a patient vicinity device.

This device may not be used in connection with life support equipment.

Underwriters Laboratories (UL) Classication:

UL safety Compliance: This system is U.L. Classied WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZ-

ARDS ONLY IN ACCORDANCE WITH UL 60601-1/CAN/CSA C22.2 NO. 601.1

EEC Safety Compliance:

This system meets the requirements of EN-60601-1 so as to conform to the Medical Device Direc-

tive 93/42/EEC (general safety information). Use 120V rating 5-15P type plug only in the U.S. This

system is intended for connection to a separate medical grade power supply.

Caution: Make sure the power cord is the correct type that is required in your area.

This system has a universal power supply that allows operation in either 100-120V AC or 200-

240V AC voltage areas (no user adjustment is required).

Use the proper power cord with correct attachment plug type. If the power source is 120 V AC,

use a power cord which is a Hospital Grade Power Cord with NEMA 5-15 style plug, labeled for

125 volts AC with UL and C-UL approvals.


7/24FSN1949 - 01/2016 English - 7

If the power source is a 240 V AC supply, use the tandem (T blade) type attachment plug with

ground conductor power cord that meets the respective European country’s safety regulations.

The hospital-grade plug for medical products intended for use in Denmark has DEMKO approvaland is rated 13 amps at 250Vac. Plug is recommended for use in medical applications and speci-

cations are being added to the standard SB 107-2-D1. Plug mates with maker’s Danish hospital-

grade socket. Hospital sockets have slightly different shaped openings allowing only the hospital

plug, not the standard Danish plug, to be inserted, to protect the ac circuit in specic medical

settings.

FCC WARNING : This equipment has been tested and found to comply with the limits of a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protec-

tion against interference. This system can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, it may interfere with other radio communications

equipment.

There is no guarantee that interference will not occur in a particular installation. If this equipment

is found to cause harmful interference to radio or television reception, the user is encouraged to

try to correct the interference by carrying out one or more of the following measures:

1. Reorient or relocate the receiving antenna.2. Increase the distance between this system and the subject of interference.

3. Plug this system into an outlet on a different electrical circuit than that to which the subject of

interference is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

NOTICES TO USER : This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1 )this device may not cause harmful interference, and (2) this device must accept any interfer-

ence received, including interference that may cause undesired operation.

This equipment generates or uses radio frequency energy. Changes or modications to this

equipment may cause harmful interference unless the modications are expressly approved in

the instruction manual.

The user could lose authority to operate this equipment if an unauthorized change or modica-

tion is made.


8/24FSN1949 - 01/20168 - English

Recycling :Follow local governing ordinances and recycling plans regarding the recycling or disposal of this

equipment.

ServicingDo not attempt to service the system yourself as opening or removing covers may expose you

to dangerous voltages or other hazards, and will void the warranty. Refer all servicing to quali-

ed service personnel. Unplug the system from its power source and refer servicing to qualied

personnel under the following conditions:

-If the power cord or plug is damaged or frayed.

-If liquid has been spilled into the system.-If objects have fallen into the system.

-If the system has been exposed to rain or moisture.

-If the system has been subjected to excessive shock by being dropped.

-If the enclosure has been damaged.

-If the system seems to be overheated.

-If the system emits smoke or abnormal odor.

-If the system fails to operate in accordance with the operating instructions.

AccessoriesUse only accessories specied by the manufacturer, or sold with the system.

ClassicationProtection against electric shock : Class I including AC/DC power.

Applied Parts : No Applied Parts

Degree of safety in the presence of ammable anesthetics mixture with air or with oxygen or

with nitrous oxide. Not suitable for use in the presence of a ammable anesthetics mixture with

oxygen or with nitrous oxide.

Mode of operation : Continuous.


9/24FSN1949 - 01/2016

1

2

3

4

5

6

7

English - 9

Item Description Pack Qty

1 MDVR (IPS700A) unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

3 AC power Cord (6ft, Medical Grade) . . . . . . . . . . . . . . . . . . . . . . . . 1

4 D-SUB cable (6ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

5 DVI cable (6ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

6 BNC cable for Video (6ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

7 SVHS cable for Video (6ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Package Contents

Verify that you received all components of your respective package.

Inspect each component and verify that none of the components have been tampered with in any way.


10/24FSN1949 - 01/201610 - English

MDVR (IPS700A) Sample System Conguration

Display Monitor

Playback

Saved to Media:

Medical Digital

Video Recorder

Control

Interface

Start and stop

with foot pedal

or hand switch.

Source Signals


11/24FSN1949 - 01/2016

1

2

3

4 5 6

78

9

10

11 12

13

14 15

16

17

18

19

20

21

22 23 24

English - 11

Connectors

1 Blu-ray Disk 13 Network port

2 USB 14 USB

3 LCD 15 RS232C

4 Capture button 16 DVI-D out

5 Record button 17 VGA out

6 Stop button 18 DVI-D in

7 Direction button 19 VGA in

8 Enter button 20 CVBS in

9 Menu button 21 CVBS out

10 Earth Terminal 22 S-Video in

11 AC ON/OFF SWITCH 23 Audio in/out

12 AC in 24 Foot pedal recording/capture


12/24FSN1949 - 01/201612 - English

Connect Input Signals

Connect Output to Video Display

MDVR has connections to receive signals as DVI-D, VGA, CVBS, and S-Video. Specic applications

will determine the type of input signal sources that will be connected to MDVR. Never use this

system with damaged cords. Keep all cords away from areas where they may cause tripping.

MDVR can play back recorded images and video to a connected display monitor. Output connec-

tion choices are DVI-D, VGA, and CVBS.

MDVR back panel

MDVR back panel

Connect input

video signals here.

Connect a videodisplay here.


13/24FSN1949 - 01/2016 English - 13

MDVR back panel

Connect Power

Connect Audio and Mechanical Switch

Only use the specied plug and voltage. Power requirements are: AC 100~240V / 50~60Hz , 2A(max).

Use the supplied 6 ft. hospital grade AC power cord. Improper power may cause electric shock or

equipment damage. To avoid the risk of electric shock, this equipment must only be connected

to a power supply with protective grounding.

Use the Audio In jack to connect an input sound device, such as a media player or microphone.

This will allow sound to be added to video recordings. The Audio Out jack is for hearing playback

of recorded sound.

The Pedal jacks (capture and record) are for connecting remote switching devices, such as a foot

pedal or an endoscopic camera system’s control features.


14/24FSN1949 - 01/201614 - English

Connect a Remote Control Device

The preferred way to record images and video with MDVR is by connecting a remote control

device, such as a touch screen tablet. For specic instructions, please refer to the user guide that

accompanies the remote control device that will be connected to MDVR.

Example:

Touch screen tablet connection

using a wireless router. For specic

instructions, see the user guide for

the remote control device that will be

connected to MDVR.

Example:

Direct wire touch screen tablet con-

nection. For specic instructions, see

the user guide for the remote control

device that will be connected to

MDVR.


15/24FSN1949 - 01/2016 English - 15

Most features in the MDVR unit are intuitively handled by a remote control device, such as a

touch screen tablet and interface software. Capture and record functions are designed for easy

end user operation via the tablet interface. There are a few conguration settings that can only

be accessed through MDVR’s front keypad and LCD. Following is a list of features found in MDVR,followed by the methods that are available for use.

MDVR Feature Main User Primary Operation Secondary Operation

Capture Image OR Staff Tablet Front panel keypad

Record Video OR Staff Tablet Front panel keypad

Enter Patient Info. OR Staff Tablet

View Recorded Files OR Staff Tablet

Play Recorded Files OR Staff Tablet

Send Files to Media OR Staff Tablet

Send Files to FTP OR Staff Tablet

Convert to DICOM OR Staff Tablet

Set File Type Installer or Admin. Tablet

File Server Access Installer or Admin. Tablet

Set Input Source/Port Installer or Admin. Tablet Front panel keypad

Time & Date Setting OR Staff Tablet Front panel keypadDHCP Setup Installer or Admin. Tablet Front panel keypad

Select Input Resolution Installer or Admin. Tablet Front panel keypad

Delete Selected Files OR Staff Tablet

Delete All Files Installer or Admin. Tablet Front panel keypad

Control Device Setup Installer or Admin. Front panel keypad

Network IP Address Installer or Admin. Tablet Front panel keypad

Firmware Version Installer or Admin. Front panel keypad

Internal Space Avail. OR Staff Tablet Front panel keypad

DVD Space Available OR Staff Tablet Front panel keypad

USB Space Available OR Staff Tablet Front panel keypad

System Shutdown OR Staff Tablet Front panel keypad

Please consult the user guide for the remote control device connected to MDVR.

Methods of Operation

Front panelcontrol keypad


16/24FSN1949 - 01/2016

IPS700A2013-10-20 14:30

[Current Work]Video Recording

1. Network IP192.168.0.1

16 - English

Front Panel Control Keypad (OSD)

The preferred method of altering most features in the MDVR system is the remote control device,

which is usually a tablet. A secondary method for altering most features is maneuvering through

the menus on the small front panel LCD screen by using the control keypad.

Below are funtions and settings that are available through the MDVR front panel LCD and key-

pad.

Home Screen The home screen shows the MDVR part

number (IPS700A), the date in year-month-day

format, and the time (24 hr.).

Other screens that are idle for 10 seconds will

revert back to displaying the home screen.

RecordingSelect CAPTURE to save a still image.

Select REC to begin video recording (red lightstarts). Select STOP to end video recording

Status ScreensPress the top arrow to cycle through the list of

system status information as described below.

1. Network IP is displayed.

2. Firmware version is displayed.

3. Internal disk storage size is displayed.

4. Removeable disk media storage size is displayed.

5. Removeable USB media storage size is displayed.

6. Scaler version is displayed.


17/24FSN1949 - 01/2016

System shutdownShutdown system

1. Input Source

DVI

English - 17

Front Panel Control Keypad (OSD)

ShutdownPress left or right arrow to start the shutdown pro-

cedure. Press ENTER to proceed with shutdown. To turn

power off, reach behind the MDVR cabinet and turn off the

power switch located on the back panel of the unit.

Menu Conguration ScreensPress MENU to enter congure mode, then press the top

arrow to cycle through the list of adjustments. Use the

arrow keys and the ENTER key to congure each setting as

described below.

1. Input Source

Press left or right arrow to cycle through source types. Press ENTER to nish.

2. Time Setting

Press ENTER to begin.

Press up or down arrow to select the rst number of the year, then select ENTER. Continue until the year-

month-day, and time (24 hr.) settings are complete. Press ENTER to nish.

3. DHCP Setup

Press ENTER to begin.

Press left or right arrow to turn DHCP on or off. Press ENTER to nish.

4. Res. Select

Press left or right arrow to cycle through input resolutions. Press ENTER to nish.

5. CTRL Device

Press left or right arrow to choose between wireless or wired (UART) control device connection. Press

ENTER to nish, the system will reboot.

6. Auto Adjust

Press ENTER to auto adjust analog settings.

7. Analog CSC

Press left or right arrow to choose between RGB and YUV settings. Press ENTER to nish.

8. Audio Input

Press left or right arrow

to choose between Line In and Mic settings. Press ENTER to nish.

9. Pedal Type

Press left or right arrow to choose pedal type 1-4. Press ENTER to nish.


18/24FSN1949 - 01/201618 - English

General Specication

Input/Output Specication

Item Description Unit

Model IPS700A (Signal processor for Medical)

Input DVI‐D ,VGA, CVBS, S‐VIDEO Port

Output DVI‐D, VGA, CVBS Port

Control key 9 button (CAPTURE, REC, STOP, SELECT, UP, DOWN,

PLUS, MINUS, MENU)

OSD language English

Power AC 100~240V / 50~60Hz , 2A(max)

Serial communication RS-232C, 115200 baud Rx

Network Ethernet TCP/IP 10/100 base TX (Auto sensing)

Compliance & Certications FDA Class I, UL 60601-1, CAN/CSA-C22.2

No.601.1-M90, FCC Part 15 Class B, MDD Class I,

IEC60601-1, EN60601-1-2, CCC & IEC60950-1

Size (H x D x W) 382 (15.039)x 354.2 (13.945) x 80 (3.149) mm/(inch)

Weight 4.8 / 10.582 Kg/Lbs

Item Type Signal Name Supported Resolution Application

Signal

Input

VIDEO (BNC,SVHS) CVBS x 1

SVHS(Y/C) x 1

NTSC / PAL Room Camera,

SD Endoscopy

ANALOG (DSUB15) DSUB Analog x 1 Up to

1920x1080/60Hz

Endoscopic Camera

DIGITAL (DVI24) Digital DVI‐D x 1 Up to1920x1080/60Hz

Endoscopic Camera

Signal

Output

VIDEO (BNC) CVBS x 1 NTSC Surgical/Diagnostic

Monitor

ANALOG (DSUB15) DSUB Analog x 1 Up to

1920x1080/60Hz

Surgical/Diagnostic

Monitor

DIGITAL (DVI24) Digital DVI‐D x 1 Up to

1920x1080/60Hz

Surgical/Diagnostic

Monitor


19/24FSN1949 - 01/2016 English - 19

Input/Output Connector Specication

Pin No. Assignment Pin No. Assignment

1 Red 9 No Connection

2 Green 10 Ground-Sync

3 Blue 11 Ground

4 Ground 12 DDC Data

5 DDC 5V Standby 13 H.Sync

6 Ground-Red 14 V.Sync

7 Ground-Green 15 DDC Clock

8 Ground-Blue

Pin No. Assignment Pin No. Assignment

1 T.M.D.S. Data2 13 No Connection

2 T.M.D.S. Data2+ 14 +5V Power

3 T.M.D.S. Data2 Shield 15 GND

4 No Connection 16 Hot Plug Detect

5 No Connection 17 T.M.D.S. Data0

6 DDC Clock 18 T.M.D.S. Data0+7 DDC Data 19 T.M.D.S. Data0 Shield

8 No Connection 20 No Connection

9 T.M.D.S. Data1- 21 No Connection

10 T.M.D.S. Data1+ 22 T.M.D.S. Clock Shield

11 T.M.D.S. Data1 Shield 23 T.M.D.S. Clock+

12 No Connection 24 T.M.D.S. Clock

Pin No. Assignment

1 Composite

2 Ground

1 S-VIDEO /Y (Luminance)

2 S-VIDEO /C (Chrominance)

3 Ground


20/24FSN1949 - 01/201620 - English

Input/Output Timing

ResolutionHorizontal

Frequency (KHz)Vertical Frequency (Hz) Pixel clock (MHz)

640 x 350 @70Hz 31.469 70.087 25.175

640 x 400 @60Hz 31.469 59.941 25.175

640 x 480 @60Hz 31.469 59.940 25.175

640 x 480 @75Hz 37.500 75.000 31.500

800 x 600 @56Hz 35.156 56.250 36.000

800 x 600 @60Hz 37.879 60.317 40.000

800 x 600 @72Hz 48.077 72.188 50.000

800 x 600 @75Hz 46.875 75.000 49.500

1024 x 768 @60Hz 48.363 60.004 65.000

1024 x 768 @75Hz 60.023 75.029 78.750

1152 x 864 @60Hz 54.348 60.053 80.000

1152 x 864 @75Hz 67.500 75.000 108.000

1280 x 720 @60Hz 45.000 60.000 74.250

1280 x 960 @60Hz 60.000 60.000 108.000

1280 x 1024 @60Hz 63.800 60.000 108.000

1280 x 1024 @75Hz 79.976 75.025 135.000

1600 x 1200 @60Hz (**) 74.077 59.981 130.375

1920 x 1080 @60Hz 67.500 60.000 148.500

DVI, VGA input timing

DVI, VGA output timing

ResolutionHorizontal

Frequency (KHz)

Vertical Frequency (Hz) Pixel clock (MHz)

720 x 480 @60Hz 31.500 60.000 27.000

1280 x 720 @60Hz 45.000 60.000 74.250

1920 x 1080 @60Hz 67.500 60.000 148.500


21/24FSN1949 - 01/2016 English - 21

Power Consumption

Recording Time

Mode Consumption (W) State

Record 44 BLURAY data backup

Record 35 HDD recording

Normal 32 Standby

Off 0 Power off

Record Device Hours Size Resolution Source

Internal disk

45.5 1 Terabyte 1080p

Surgical camera83.3 1 Terabyte 720p

500 1 Terabyte 480p

Backup Device Hours Size Resolution Source

USB

1 22 Gbyte 1080p

Internal disk

1 12 Gbyte 720p1 2 Gbyte 480p

Blu-ray

1.1 25 Gbyte 1080p

2 25 Gbyte 720p

12 25 Gbyte 480p

DVD

0.15 4.7 Gbyte 1080p

0.3 4.7 Gbyte 720p

2.3 4.7 Gbyte 480p


22/24FSN1949 - 01/2016

355 mm / 13.98 in.

3 8 2 m m

/ 1 5 . 0

4 i n .

8 0 m m /

3 . 1

5 i n .

22 - English

Mechanical Drawing


23/24FSN1949 - 01/2016 English - 23

Troubleshooting

Problem Possible Solution

No power Check fuse in AC Inlet. If fuse has failed, replaced with similarly rated

new part.Will not record Verify that there is sufficient space available on the internal disk.

No response from MDVR Re-boot the system.

Disc or USB failure Make sure that the media being used is not write protected.

Verify that there is sufficient space available on the media.

Erase unnecessary les or replace the disc.

Cleaning Instructions

CAUTION:Do not apply or spray liquid directly on the Video Image Processor chassis as excess liquid may

cause damage to internal electronics. Instead, apply the liquid to the cleaning cloth rst.

Note: The Video Image Processor chassis is not disinfected or packed in a sterile environment.

Follow your hospital protocol in case the Video Image Processor chassis needs to be disinfected

prior to installation.

Note: Follow your hospital protocol for the handling of blood and body uids.

Note: Take care not to damage or scratch the front LCD panel. Be careful with rings or other jew-

elry that can touch the front lter. Do not apply pressure on the front lter or LCD panel.

1. Clean the exterior of the Video Image Processor chassis using a soft cotton cloth, lightly

moistened with a recognized cleaning product for medical equipment.

2. Repeat with water only.

3. Wipe dry with a dry cloth.

The chassis has been tested for resistance to the following products:

hypochlorite diluted with water between1:10 and 1:100)


24/24

Thank you for choosing our product.

Service

Please contact our customer service if you need any information or help with our products.

Warranty

One year, parts and labor.

EC Representative

FORESEESON GmbHIndustriestrasse 38a, 63150 Heusenstamm, Germany

Tel. +49(0)6104-643980

FORESEESON UK Ltd.Unit 71, Barwell Business Park

Leatherhead Road, Chessington, Surrey

KT9 2NY, UK Tel. +44-(0)208-546-1047

FORESEESON KOREA404B, Pangyoinnovalley B, 253 Pangyo-ro, Bundang-gu,

Seongnam-si, Gyeonggi-do, Korea, 463-400

Tel. +82(31)8018-0780 Fax. +82(31)8018-0786

FORESEESON (Shanghai) Medical Equip. Co., Ltd.Room 307, 3F No. 56, 461 Hongcao Road

Caohejing Development DistrictXuhui, Shanghai 200233 Tel: 86-21-6113-4188

FORESEESON CUSTOM DISPLAYS, INC.2210 E. Winston Road, Anaheim, CA 92806 USA

Tel. 1-714-300-0540 Fax. 1-714-300-0546

D&T Inc.Jang-dong, Daedeok Valley, 26-121, Gajeongbuk-ro,

Yuseong-gu, Daejeon, Korea, 305-343 Tel. + 82(42)360-8000 Fax. +82(42)360-8005

Specications are subject to change with or without notice.

www.fsnmed.com

mdvr usser manual

Documents