mazda bt-50 gps and multimedia map update guide · mazda bt-50 guide to navigation map updates...
TRANSCRIPT
MAZDA BT-50 GPS AND MULTIMEDIAMAP UPDATE GUIDE
MAZDA BT-50 GUIDE TO
NAVIGATION MAP UPDATES
Inside this guide is your step-by-step way to update the maps and get the most from
your GPS and Multimedia System.
In the initial 3-Years of ownership your GPS and Multimedia System navigation maps
can be updated complementary. Thereafter, individual navigation map updates can
be purchased online at anytime.
In using this guide you will require a USB stick and Windows PC with internet access.
Map updates for your Mazda BT-50 are accessed from the www.naviextras.com
website and use of the Naviextras Toolbox application. Map updates will be
installed using a USB stick.
Go to www.naviextras.com select GET FREE
MAPS, then register and login. From the menu
select Mazda BT-50 Australia and the X208AU
navigation device and continue.
GET READY FOR THE UPDATE
1. Go to the Naviextras website
1. Install the Naviextras Toolbox
Select the FREE UPDATES tab and click on the
Toolbox download link.
2. Download the Toolbox
Download the Toolbox software application and
install to your Windows PC. Then open the
Toolbox application.
3. Install the Toolbox to your PC
The Naviextras Toolbox application can be installed to a PC with a Windows XP (SP 2) / Windows Vista (32-bit) / Windows 7 (32-bit or 64-bit) / Windows 8 / Windows 10 operating system. Apple Macintosh OS is not supported.
Using a USB memory stick (8GB or larger)
format the stick using your Windows PC. The file
system format must be FAT32.
PREPARE THE USB MEMORY STICK
4. Format the USB stick
1. Install the Naviextras Toolbox
Insert the USB stick into the Navigation System
USB input port. Then go to the navigation menu
and select Settings > Update.
5. Insert the USB stick
To start preparation of the USB stick the below
menu prompt will appear. Select Yes and the
Navigation System will prepare the USB.
6. Prepare the USB stick for the update
The Navigation System collects and saves the
device information to the USB. Do not remove
the USB stick and do not power off the system.
COLLECT THE NAVIGATION DEVICE INFORMATION
7. Collecting the device information
When the device information has successfully
saved to the USB stick the prompt below will
appear. Select OK and remove the USB stick.
8. The USB stick is ready
Open the Toolbox application on your PC and
connect to the internet. Click the Updates tab and
insert the USB stick into the PC. The Toolbox will
read the device information on the USB stick.
DOWNLOAD THE MAP UPDATE
9. Insert the USB stick into the PC
1. Install the Naviextras Toolbox
Select Install and the Map Update download will
start. Depending on the internet connection
speed the Map Update (2GB file) download will
require approximately 15 minutes or longer.
10. Download the Map Update
When the download is complete a message will
appear to confirm the Map Update is successfully
installed to the USB stick. Select OK and remove
the USB stick from the PC.
11. Map Update installed to the USB stick
Insert the USB stick with the Map Update into
the Navigation System USB input port. Go to the
navigation menu and select Settings > Update.
START THE MAP UPDATE INSTALLATION
12. Insert the USB stick
The Navigation System will automatically detect
the map update stored on the USB stick and the
below message prompt will appear. Select Yes.
13. Start the Map Update
During the update process the below screen will
appear. Importantly, do not disconnect the USB
and do not power off the Navigation System.
14. Update in progress
When the update is successful remove the USB
stick and select OK. The Navigation System will
restart automatically.
15. Update is completed
COMPLETE THE MAP UPDATE
To verify the map version before and following a map update go to the navigation menu and select Information > About > Content > Maps.