Magnet 6x2

Washout starts here

sanded linear, then heat twisted to final washout

Leading edge reinforcement: copier paper 80 g sq. m

with white glue diluted 50/50

Washout 15 mm

Washout 15 mm

Paper reinforcement

on top & bottom of the elevon

Elevons are cut after shaping sanding and twisting

Bottom sanding line

1 mm plywood control horn

Top sanding guideline

airfoil maximum thickness

Initial guide line for rough shaping

Hinge: Blenderm strips : 3 mm wide

6 mm Depron foam board construction

Wrapped paper Leading Edge 80 g sq.m

D-tube wing structure

in a routed channel

Light paper “Air Mail”over 2 mm O.D. plastic tubing

Light paper “Air Mail”over 2 mm O.D. plastic tubing

Steel fishing cable

Cut the elevon but bevel the wing

Airfoil is a constant 6mm thick all along the span !

10 cm scale ruler

Steel fishing cable