‘market leaders in rendered building products’ the poly-tek cabin
TRANSCRIPT
‘Market Leaders in Rendered Building Products’
The Poly-Tek Cabin
The Base
Flooring on
Steel Stratco Tuff-Floor Base with 19mm GP Flooring
Bottom Plate
All timber is 90x45 MGP 12
First Panel
Insert corner junction stud then fit first panel
Panels easily lifted into place, only weighing 20kg per sqm.
Corner Panel up
Insert stud and cyclone rod
Back Wall up
Install Top plates & Tie-Down
Ensure all panels are square
Nail off Panels
Door installation
Window Installation
Installing window heads
Cutting walls on the rake
Roof Installation
Using the Bondor Solarspan Roof system the roof was installed in 2 hoursThe entire process including roof screwed on and finished was completed in
1 day!
Two coats paint later
Perfect Render Effect Finish
This finish was achieved using 2 coats of Dulux
Weathershield.
The Finished Product
The Poly-Tek SIPS Cabin