mark slot 2 led type: architectural indirect wall patterns
TRANSCRIPT
Page 1 S2LWIP TUWH WALL PATTERNS 01/13/22
marklighting.com | 888-834-5684 | ©2014-2022 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
MARK ARCHITECTURALLIGHTING TM
Slot 2 LED Indirect Wall PatternsTunable WhiteThe Slot LED family of luminaires offers an unparalleled package of performance and features for your next lighting project. Precision lumen DIRECTIR optics deliver optimized light where needed for ceilings and walls. With other key features such as simplified installation, seamless controls integration and superior color constancy, the Slot LED family from Mark Lighting offers exceptional quality and design flexibility.
Technical Drawing
Type:
Project:
Catalog Number:DO NOT TYPE HERE. Autopopulated field.
Housing Nominal 2.5” x 3.75” extruded aluminum housing
Finish White, Black or Silver powdercoat
Reflector Formed steel with high reflectance white
Distribution/Shielding Extruded 90% transmissive acrylic lens with a textured surface providing diffuse illumination and a uniform appearance for direct lambertian distribution (No Optics). Wall Graze (WG) distribution options incorporate co-extruded lenses. Clear Acrylic dustcover (DC) is available for the indirect distribution only.
LED ComponentsLinear: Nichia®- 757 series LED chips (>80 CRI)
ElectricalLong-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life. 80% LED lumen maintenance at 60,000 hours (L80/60,000).
Color ConsistencyThe Acuity Brands circuit boards for the linear LED components use a precise binning algorithm which creates a consistent color temperature from board to board. The color a variation of no greater than a 2.5 Step MacAdam (2.5SDCM) along the black body locus from board to board.
DriverFactory tuned constant current electronic dimming driver is standard. Flicker free dimming available down to <1%. LED drivers perform within the recommended operating areas for flicker as a function of frequency and modulation (%) IEEE Standard 1789-2015 (IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers), in typical operating conditions at representative dimming levels. Electrical specifications at maximum driver load: PF > 0.9 and THD <20%. Meets FCC Title 47 Class A or Class B. Other available drivers include Lutron, DMX and DALI protocol drivers.
Certification CSA tested to UL 1598 standards, assembled in the USA. Damp location listed.
Warranty 5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.
Specification Features
Indirect Wall
3 3/4
2 1/2 1/2
580
590
10000K
6500K
4000K
3000K2700K
1800K
3500K
4500K5000K
5700K
2200K2000K
B Rhythm Range
A Productivity Range
Productivity Range 3000K to 5000KA
Rhythm Range 2700K to 6500KB
Mainstream Dynamic Tunable White with nTune TechnologyTunable white nTune™ is an all digital light color temperature control within an nLight enabled luminaire. This brings tunable white lighting control into the mainstream with repeatable, consistent results in an economical luminaire form and system already familiar to schools. Designers and facility operators are granted the freedom to tie scenes to specific activities or to complement colors or materials within a visual environment. nTune™ allows color temperature settings through the Productivity Range of 3000K-5000K or Rhythm Range of 2700K to 6500K. Refer to the nLight Programming User’s Guide for instructions on customizing to your application with SensorView™.
Tunable White GPHD• Gamut: One dimensional warm-Cool
• Path: Direct 3000K to 5000k (Productivity Range) or 2700K to 6500K (Rhythm Range)
• Handle: Two Natural Language Handles: Intensity and CCT
• Data: nLight with nTune technology for both handles of control
SM
Page 2 S2LWIP TUWH WALL PATTERNS 01/13/22
marklighting.com | 888-834-5684 | ©2014-2022 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
MARK ARCHITECTURALLIGHTING TM
Slot 2 LED Indirect Wall PatternsTunable White
A+ Capable options indicated by this color background.
A+ Capable Luminaire This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.
• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight® control networks when ordered with drivers marked by a shaded background*
• This luminaire is part of an A+ Certified solution for nLight control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control options marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details
Ordering Example: S2LWIP OPP 20FT 290OC 80CRI TUWH PROR I600LMF DARK NLT 120 WHT
Series Plan Total Run Length Configuration 3Indirect Light Source
Color Rendering Dynamic Feature Dynamic Range
S2LWIP Slot 2 Wall Patterns - Indirect
SPP Square Pattern Plan
RPP Rectangular Pattern Plan
OPP Open Pattern Plan
CPP Closed Pattern Plan
__FT 1 Specify continuous run length (in whole feet 2’ minimum)
__90IC # Inside corners
__90OC # Outside corners
I80CRI 80 CRI
I90CRI 90 CRI
TUWH Tunable White PROR Productivity Range(3000K-5000K)
RHYR Rhythm Range(2700K-6500K)
Indirect LED Light Output Indirect Distribution (Optics) Minimum Dimming Level Control Interface Voltage Finish
I600LMF 600 Lumens per FT
I800LMF 800 Lumens per FT
I1000LMF 1000 Lumens per FT
I1200LMF 1200 Lumens per FT
I_LMF ## Lumens per FT (Limited to 500LMF to 1300LMF in 50LMF increments)
(blank) No indirect distribution / Standard lambertian
AS Asymmetric Distribution
DARK Constant current, dimming to 0.1%
NLT nLight nTune interface MVOLT Multi-volt, 120-277
120 120V
277 277V
WHT White (gloss)
BLK Black (gloss)
SLV Silver (gloss)
WHTT White (textured)
BLKT Black (textured)
SLVT Silver (textured)
RALTBD RAL paint finishes
See RAL Brochure for available options and ordering information
Options
DC 2 Clear Dust Cover
DCF 2 Frosted Dust Cover
DPL Damp Location Listing
Notes:1. Fixture length may effect available options, consult factory with validation issues.2. Not available with AS option.3. Configurations do not contain emergency options or sensors, those options are controlled from the
straight fixtures.
Page 3 S2LWIP TUWH WALL PATTERNS 01/13/22
marklighting.com | 888-834-5684 | ©2014-2022 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
MARK ARCHITECTURALLIGHTING TM
Slot 2 LED Indirect Wall PatternsTunable White
Patterns Plan:Slot 4 LED patterns be configured in 1’ increments with illuminated 90° inside or outside corners, with standard 2’ corner junction lengths. For custom angles, corner or junction lengths, consult factory.
FOR PENDANT
FOR WALL
INSIDE CORNER OUTSIDE CORNER
24"
24"
24"
24"
24"
24"
24"
24"
24"
24"
90° Corner
Tips4 corners per SPP and RPP plansMaximum of 6 corners per OPP and CPP plans
Total Run Length = all sides of the patternSubmittals are required for patterns, please use the grid on the next page for your payout with all relevant dimensions and types of intersections.
Power Feed
Total run length = 24'1900C = 1 90° corner
S2LWDP OPP 24FT 190C 80CRI 30K 600LMF MIN1 EGLD 120 WHT ZT
Example:
10'
14' *not to scale
Page 4 S2LWIP TUWH WALL PATTERNS 01/13/22
marklighting.com | 888-834-5684 | ©2014-2022 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
MARK ARCHITECTURALLIGHTING TM
Slot 2 LED Indirect Wall PatternsTunable White
4’
4’Key
9CS
5CC
3CL
Layout SketchPlease draw and configure your pattern plan below.
Fixture PerformanceRhythm Range (RHYR) Productivity Range (PROR)
4FT Individual (80 CRI) Total Lumens Lumens Per Watt Total Lumens Lumens Per WattLumen Output 2700K 4600K 6500K 2700K 4600K 6500K 3000K 4000K 5000K 3000K 4000K 5000K
Indirect
600LMF 2199 2018 2145 135 140 143 2282 2044 2203 142 145 149
800LMF 2860 2562 2727 137 144 143 2953 2592 2712 142 148 147
1000LMF 3818 3589 3861 134 144 142 3950 3643 3857 140 151 148
1200LMF 4524 4249 4543 131 140 140 4689 4171 4465 140 149 142
Page 5 S2LWIP TUWH WALL PATTERNS 01/13/22
marklighting.com | 888-834-5684 | ©2014-2022 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
MARK ARCHITECTURALLIGHTING TM
Slot 2 LED Indirect Wall PatternsTunable White
Mountings Joiners
AEL Precision Row-Mount 3-step fixture-to-fixture connection method
Step 1: Align
Step 2: Engage
Step 3: Lock
Continuous RunsSlot 2 LED features the AEL precision joiner to create a hairline seam between luminaires, providing a monolithic visual aesthetic.
Page 6 S2LWIP TUWH WALL PATTERNS 01/13/22
marklighting.com | 888-834-5684 | ©2014-2022 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
Choose nomenclature from these columns
Dri
ver
Conf
igur
atio
ns
Minimum Dimming Level Control Input Driver Dimming
Range Notes
NODIM + (blank) = 0-10V Generic Driver - Includes no 0-10V leads from the driver.
MIN10 + ZT = 0-10V Generic Driver 100 to 10% Linear dimming
MIN1 + ZT = 0-10V eldoLED ECOdrive 100 to 1% Formerly (EZ1) nomenclature. Linear dimming
MIN1 + NLIGHT = 0-10V eldoLED ECOdrive 100 to 1% Logarithmic dimming
MIN1 + ECOD2 = Lutron forward phase control 100 to 1% LUTRON Hi-lume 1% 2-wire (model LTEA4U1U)
MIN1 + ECOD5 = Lutron Ecosystem 100 to 5% LUTRON 5-Seires EcoSystem LED Driver (model LDE5)
MIN1 ECOD Lutron Ecosystem 100 to 1% LUTRON Hi-lume 1% EcoSystem LED Driver with Soft-on, Fade-to-Black (model LDE1)
DARK ZT 0-10V eldoLED SOLOdrive 100 to 0.1% Formerly (EZB) nomenclature. Linear dimming
DARK NLIGHT 0-10V eldoLED SOLOdrive 100 to 0.1% Logarithmic dimming
DARK DALI DALI compatible eldoLED SOLOdrive 100 to 0.1% "Compatible with DALI. Formerly (EDB & EDAB)
nomenclature." Logarithmic dimming
Intelligent Luminaire Technology Guide
Choose nomenclature from these columns
Cont
rol /
Sen
sor
Conf
igur
atio
ns
Control Input Sensor Sensor Notes
ZT + API = MSD 7 ADCXIndividual fixture control only. PIR integral occupancy sensor with automatic dimming control photocell. (Old nomenclature: ZT + PIR + ADC)
ZT + APD = MSD PDT 7 ADCXIndividual fixture control only. PDT integral occupancy sensor with automatic dimming control photocell. (Old nomenclature: ZT + PDT + ADC)
NLIGHT + (blank) = nIO EZ PH nLight enabled only. No onboard sensor.
NLIGHT EMG = nIO EZ PH ER Emergency nLight enabled only. No onboard sensor.
NLIGHT + API = nIO EZ PH + nES 7 ADCX nLight nES 7 ADCX PIR integral occupancy sensor with automatic dimming photocell. (Old nomenclature: NLIGHT + PIR + ADC)
NLIGHT + PDT = nIO EZ PH + nES PDT 7 nLight nES PDT 7 dual technology integral occupancy sensor. (Old nomenclature: NLIGHT + PDT)
NLIGHT + APD = nIO EZ PH + nES PDT 7 ADCXnLight nES PDT 7 dual technology integral occupancy sensor with automatic dimming photocell. (Old nomenclature: NLIGHT + PDT + ADC)
NLTAIR2 (blank) RIO EZDL 90D G2 https://www.acuitybrands.com/products/detail/778845/nLight/rIO/Fixture-embedded-nLight-AIR-network-interface
NLTAIR2 API RES7 G2 https://www.acuitybrands.com/products/detail/593899/nLight/RES7-Sensor/nLight-AIR-Fixture-Integrated-Wireless-Sensor
NLTAIR2 APD RES7 PDT G2 https://www.acuitybrands.com/products/detail/593899/nLight/RES7-Sensor/nLight-AIR-Fixture-Integrated-Wireless-Sensor
MARK ARCHITECTURALLIGHTING TM
Slot 2 LED Indirect Wall PatternsTunable White
Page 7 S2LWIP TUWH WALL PATTERNS 01/13/22
marklighting.com | 888-834-5684 | ©2014-2022 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
MARK ARCHITECTURALLIGHTING TM
Slot 2 LED Indirect Wall PatternsTunable White
Tunable White Wall Pod
nPODM 2P DX CCT
Typical nLight network layout with power supply, sensor and wallpod.
B
A nCM PDT 9
nPODM 2P DX CCT
A
B
WIRING KEY
BA
CAT-5e Cable Line Power
nPS 80
A
J-BOX
40mA
nPS 80
40mA
nCM
nPODM
~5mA ~3mA ~3mA~6mA w/Sensor
SLOT
A
*Note: Also applicable to linear runs. Each 4' fixture section must be connected, by CAT5 cable, to another fixture.