manufacturing units stumpp, schuele & somappa pvt. ltd. 143-151,antarasanahalli ind.area phase...
TRANSCRIPT
Corporate Office & Main PlantRegd.Office & Factory:139/2, Hosur Road,Koramangala,Bangalore-560 095
GBPSite no: 115, Hongasandra,Garvebhavipalya,Bangalore-560 068
BMSPlot No.4 ,Bommasandra Industrial Area, Bommasandra PostAnekal TalukBangalore-562 158
GGN Old Gurgaon-Manesar Road,Vill.Mohammadpur, JharsaGurgaon-122 004
CHENNAI 139, Karanai Village, Perambakkam Post, Thiruvallur Dist, Tamilnadu-631 402
MGM(MG Metallic Springs)
Bellary Road, Ananth pura
Andhra Pradesh-515004
Kern-Liebers Somappa PrecisionParts Pvt. Ltd.
143-151,Antarasanahalli Ind.AreaPhase II,Tumkur-572160
Legget & Platt Somappa Comfort System (I) Pvt. Ltd.
Hosur RoadBangalore-560 095
Dye Spring DivisionBull Temple Road
Bangalore-560 019
UnitsManufacturing
Call us at +91 80 57673389 or email us at [email protected]
For Enquires
Stumpp, Schuele & Somappa
Stumpp, Schuele & Somappa
Stumpp, Schuele & Somappa
Stumpp, Schuele & Somappa
www.sss-india.com
1Million Springs manufactured per day
9000 varieties of Springs manufactured per year
0.15mm to 24mm dia Spring manufacturing facility
12,000 tonnes of steelConverted into Springs per year
Stumpp, Schuele & Somappa
100 Million USD Groupand largest spring manufacturer in India
State-of-the-Art Tech Centerwith product design and testing facilities
Quality Certifications ISO 9002, QS 9000, TS16949 & Ford Q1
8 Manufacturing Plantsstrategically located across India
www.sss-india.com
Suspension Springs
Damper Springs
Valve Springs
Fuel Injector Springs
Spiral Springs
Diaphragm Springs
Flat Springs
Wire Forms
Torsion & Tension Springs
Stabilizer Bars
Dye Springs
Our Product
Range
Fuel
!State of the art CNC Morita Coiling Machines from Japan and technical collaboration with Mitsubishi Steel Manufacturing.
!Fully automated line with 3 million pieces capacity per annum and complete testing capabilities.
!Wire diameters ranging from 8mm to 22mm
!Normal Stress, High Stress and Super High Stress Suspension Springs
!In house surface treatment plant with powder coating designed to exceed 1000 hours of salt spray test.
Injector Springs
Application
Materials
Sizes
End Configuration
Surface Finish
Diesel fuel injection pumps
IS 4454 Part III - Grade 2D, Graphytan OTEVA70, JIS SWOSC - V
Wire Diameter : 2mm to 4.5mm , Outer Diameter: As per the requirement , Length : As per the requirement
Closed and Ground
Oiling , Vibro finished
Application
Materials
Sizes
End Configuration
Surface Finish
Brush springs and alternators, window regulators mechanisms, seat recliners, chain tension mechanism, defence mechanism, timer mechanism, cord retraction mechanism
DIN 17222 , DIN 17224
Flat Strip Thickness : 0.3 mm to 3.2 mm , Width : 3 mm to 16.0 mm
Closed and Ground
Oiling ,Phosphating , Powder Coating
Product Type - SSS-FIS-1381
Features!State of the art CNC Morita Coiling Machines from Japan and technical collaboration with Mitsubishi Steel Manufacturing.
!Fully automated line with 3 million pieces capacity per annum and complete testing capabilities.
!Wire diameters ranging from 8mm to 22mm
!Normal Stress, High Stress and Super High Stress Suspension Springs
!In house surface treatment plant with powder coating designed to exceed 1000 hours of salt spray test.
Features
SpiralSpringsProduct Type - SSS-SPS-1831
!State of the art CNC Morita Coiling Machines from Japan and technical collaboration with Mitsubishi Steel Manufacturing.
!Fully automated line with 3 million pieces capacity per annum and complete testing capabilities.
!Wire diameters ranging from 8mm to 22mm
!Normal Stress, High Stress and Super High Stress Suspension Springs
!In house surface treatment plant with powder coating designed to exceed 1000 hours of salt spray test.
Features
DiaphragmSpringsProduct Type - SSS-SPS-1831
Application
Materials
Sizes
End Configuration
Surface Finish
Engine
IS 4454 Part II – Grade VW , IS 4454 Part III – Grade 1D, 2D, DIN 177223 Sheet 2VD , DIN 177225 – 6SiCr5 , 50CrV4 , Graphytan OTEVA60 , OTEVA70 , JIS SWO - V, SWOCV - V, SWOSC - V, ASTM A230, A401, A877, SAE-J351, J157, J172
Outer Diameter : 3mm to 200mm, 0.8mm to 10mm, Length : As per requirement
Open and Ground , Closed and Ground
Oiling
Application
Materials
Sizes
Tip Configuration
Surface Finish
Clutch for 4 wheelers (Cars, LCV & HCV)
Thickness : 1.7mm to 4.53mm , Outer Diameter : 32mm to 350mm
Straight Tip , Goose neck Tip , Double Neck Tips , Chamfered Tips
Oiling , Phosphating
DIN 50CrV4 , DIN C 75 G
ValveSpringsProduct Type - SSS-FIS-1381
!State of the art CNC Morita Coiling Machines from Japan and technical collaboration with Mitsubishi Steel Manufacturing.
!Fully automated line with 3 million pieces capacity per annum and complete testing capabilities.
!Wire diameters ranging from 8mm to 22mm
!Normal Stress, High Stress and Super High Stress Suspension Springs
!In house surface treatment plant with powder coating designed to exceed 1000 hours of salt spray test.
Features
Application
Materials
Sizes
Edge Condition
Surface Finish
Spire speed nuts, hose clamps (Low pressure and high pressure), textile machinery, flat and wave washers, half shaft clamps, defence parts.
IS : 2507 , DIN 17222
Thickness : 0.15mm to 3.00mm , Width : 5mm to 100mm
Sheared edges , Sheared & dressed , Rounded edges
Oiling , Phosphating , Zinc Plating (black, blue, yellow, green zinc passivated)
Application
Materials
Sizes
End Configurations
Surface Finish
4 wheeler & 2 wheeler
Wire Diameter* : 3mm to 20mm, Outer Diameter* : 20mm to 250mm , Length * : 100mm - 650mm
* can be increased with special attachments
Open , Open and Ground , Closed and Ground , Closed and Unground , Pig Tail Ends
Oiling , Phosphating , Powder Coating , Electrophoratic Coating , Zinc Plating , Chromium Plating
IS 4454 Part I – Grade2/Grade3 , IS 4454 Part III – Grade 2S , DIN 17223 Class B/Class C , SiCr 17224 , JIS SWP-A/SWP-B , SWOSC-B , ASTM A228,A229 , SAE-9254
FlatSpringsProduct Type - SSS-FIS-1381
!State of the art CNC Morita Coiling Machines from Japan and technical collaboration with Mitsubishi Steel Manufacturing.
!Fully automated line with 3 million pieces capacity per annum and complete testing capabilities.
!Wire diameters ranging from 8mm to 22mm
!Normal Stress, High Stress and Super High Stress Suspension Springs
!In house surface treatment plant with powder coating designed to exceed 1000 hours of salt spray test.
Features
SuspensionSpringsProduct Type - SSS-FIS-1381
!State of the art CNC Morita Coiling Machines from Japan and technical collaboration with Mitsubishi Steel Manufacturing.
!Fully automated line with 3 million pieces capacity per annum and complete testing capabilities.
!Wire diameters ranging from 8mm to 22mm
!Normal Stress, High Stress and Super High Stress Suspension Springs
!In house surface treatment plant with powder coating designed to exceed 1000 hours of salt spray test.
Features
Torsion & TensionSpringsProduct Type - SSS-FIS-1381
Application
Materials
Sizes
End Configuration
Surface Finish
Brakes, Clutches, Gear boxes
IS 4454 Part I –Grade2/Grade3/Grade4 , IS 4454 Part IV –Grade1(stainless steel) , DIN 17223 Sheet 1 class B, Class C , DIN 17223 class II ,
JIS SWA,SWB,SWC,SWP-A/SWP-B/SWP-C , JIS SUS-312, SUS-316(Stainless steel) , ASTM A228
Wire Diameter : 0.15mm to 6mm , Outer Diameter : As per the requirement , Length : As per the requirement
Hook ends as per IS 7907 or DIN 2097
Oiling , Phosphating , Electrophoratic Coating , Zinc Plating (black, blue, yellow, green zinc passivated)
Application
Materials
Sizes
End Configurations
Surface Finish
4 wheeler & 2 wheeler
Wire Diameter* : 3mm to 20mm, Outer Diameter* : 20mm to 250mm , Length * : 100mm - 650mm
* can be increased with special attachments
Open , Open and Ground , Closed and Ground , Closed and Unground , Pig Tail Ends
Oiling , Phosphating , Powder Coating , Electrophoratic Coating , Zinc Plating , Chromium Plating
IS 4454 Part I – Grade2/Grade3 , IS 4454 Part III – Grade 2S , DIN 17223 Class B/Class C , SiCr 17224 , JIS SWP-A/SWP-B , SWOSC-B , ASTM A228,A229 , SAE-9254
!State of the art CNC Morita Coiling Machines from Japan and technical collaboration with Mitsubishi Steel Manufacturing.
!Fully automated line with 3 million pieces capacity per annum and complete testing capabilities.
!Wire diameters ranging from 8mm to 22mm
!Normal Stress, High Stress and Super High Stress Suspension Springs
!In house surface treatment plant with powder coating designed to exceed 1000 hours of salt spray test.
Features
WireformSpringsProduct Type - SSS-FIS-1381
!State of the art CNC Morita Coiling Machines from Japan and technical collaboration with Mitsubishi Steel Manufacturing.
!Fully automated line with 3 million pieces capacity per annum and complete testing capabilities.
!Wire diameters ranging from 8mm to 22mm
!Normal Stress, High Stress and Super High Stress Suspension Springs
!In house surface treatment plant with powder coating designed to exceed 1000 hours of salt spray test.
Features
StabilizerSpringsProduct Type - SSS-FIS-1381
DyeSpringsProduct Type - SSS-FIS-1381
Features
Application
Materials
Sizes
End Configuration
Surface Finish
Anti-roll bars in Cars and LCVs
JIS SUP 9 , DIN 55Cr3
Bar Diameter : 14 mm to 25 mm , Developed Length : 600 mm - 2900 mm
Machine & Thread rolled , Upset & forged , Cold formed
Powder Coating
!State of the art CNC Morita Coiling Machines from Japan and technical collaboration with Mitsubishi Steel Manufacturing.
!Fully automated line with 3 million pieces capacity per annum and complete testing capabilities.
!Wire diameters ranging from 8mm to 22mm
!Normal Stress, High Stress and Super High Stress Suspension Springs
!In house surface treatment plant with powder coating designed to exceed 1000 hours of salt spray test.
Application
Materials
Sizes
End Configurations
Surface Finish
Yarn dyeing for cotton, polyester and silk
Coil wired diameter : 2.65mm to 3mm , Lace wire diameter : 0.95mm to 1.1mm , Coil Inner Diameter : 38mm - 100mm
Spring Length : 145mm - 270mm
None
Special springs with Sand blast Dye springs and straight, conical and radial compression springs made
AISI 304 , AISI 316 (Stainless steel)
Features!State of the art CNC Morita Coiling Machines from Japan and technical collaboration with Mitsubishi Steel Manufacturing.
!Fully automated line with 3 million pieces capacity per annum and complete testing capabilities.
!Wire diameters ranging from 8mm to 22mm
!Normal Stress, High Stress and Super High Stress Suspension Springs
!In house surface treatment plant with powder coating designed to exceed 1000 hours of salt spray test.
Application
Materials
Sizes
End Configuration
Surface Finish
Clutch & Clutch Housing
IS 4454 Part II - Grade VW, Grade SW , IS 4454 Part III - Grade1D/Grade2D
Wire Diameter : 0.8mm to 6mm
Closed and Ground
Oiling , Phosphating , Painting
Note : 100% segregated load group for ease of assembly.
DamperSpringsProduct Type - SSS-FIS-1381
!State of the art CNC Morita Coiling Machines from Japan and technical collaboration with Mitsubishi Steel Manufacturing.
!Fully automated line with 3 million pieces capacity per annum and complete testing capabilities.
!Wire diameters ranging from 8mm to 22mm
!Normal Stress, High Stress and Super High Stress Suspension Springs
!In house surface treatment plant with powder coating designed to exceed 1000 hours of salt spray test.
Features
For
All Automobile Manufacturers
OEMOEMin India
Toyota
Honda Motors India
General Motors India
Ford India
Hyundai Motor India
Maruti Udyog Limited
Mahindra & Mahindra
Tata Motors Ltd.
Bosch
Delphi Corporation
Visteon
TVS Motors
Yamaha Motor