NORTH AMERICA2700 North First StreetSan Jose, CA 95134Phone: +408.964.3500Fax: +408.964.3440

EUROPE & MIDDLE EASTLerchenstrasse 191710 GunzenhausenGermanyPhone: +49.(0)9831.51.0

www.sanmina.comSanmina Corporation is an EEO/AA employer©2018 Sanmina Corporation. All rights reserved. Sanmina® is a registered trademark of Sanmina Corporation. All other trademarks and product names used in this publication are for identification purposes only and may be trademarks of their respective owners.

SOUTHEAST ASIANo 2, Chai Chee DriveSingapore 469044SingaporePhone: +65.6245.7300

ABOUT SANMINA CORPORATIONSanmina Corporation is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the medical, communications networks, defense and aerospace, industrial and semiconductor systems, multimedia, computing and storage, automotive and clean technology sectors. Sanmina has facilities strategically located in key regions throughout the world.

For more information, visit www.sanmina.com.

OIL AND GAS DIVISION MANUFACTURING AND ENGINEERING SERVICES

GREATER CHINAKader Industrial Building, 5th Floor22 Kai Cheung RoadKowloon Bay, Hong KongPhone: +852.2305.1800Fax: +852.2799.2398

HoustonMonterrey

San Jose

Sanmina Oil & Gas has 20 years experience and is equipped with

specialized manufacturing capabilities for meeting the high tech and high reliability needs of

the Oil & Gas industry. We manufacture PCBAs, precision machined components

and complex electro-mechanical assemblies for downhole, surface and

subsea products.

MANUFACTURING AND ENGINEERING SERVICES FOR YOUR MISSION CRITICAL PRODUCTSThe Sanmina Oil & Gas Division was established in 2013 with the acquisition of a machining and mechanical assembly plant in Monterrey, Mexico. Founded in Silicon Valley in 1980, Sanmina is a major global manufacturing and engineering services provider with over 75 locations worldwide. In 2015, Sanmina acquired the CST Group in Houston. CST Group came to Sanmina with an established track record of over 20 years, providing manufacturing and engineering services to major oilfield services and equipment suppliers. In addition to Sanmina’s Oil & Gas locations, Sanmina also provides a broad range of mechanical and electrical engineering and global manufacturing resources. Division being the front line.

MANUFACTURING & ENGINEERING SERVICESFOR YOUR MISSION CRITICAL PRODUCTSWhen It All Matters . . .

Sanmina Oil & Gas has extensive experience providing high-tech

engineering services to bring your product to commercial realization.

Offering mechanical, electrical, software and systems engineering design services, we can help bring

your new product to market rapidly. Our engineers have helped our customers secure many of our

industry’s most important patents.

With two locations, Houston Texasand Monterrey Mexico, Sanmina Oil

& Gas achieves the highest standards for your precision machining and mechanical assembly needs. Equipment

includes CNC lathes and mills, wire and sinker EDM, gun drilling,

boring, honing, induction heat treating and much more.

MANUFACTURING ENGINEERING MACHINING

We specialize in mission critical products where the cost of failure can exceed the cost of the equipment.

Most of our clients are among the largest oilfield services or equipment providers.

For more information: sanmina.com

WHEN MORE THAN JUST “BUILT-TO-PRINT” MATTERS

WHEN A PROVEN TRACK RECORD MATTERS

Sanmina Oil & Gas has a proven track recordof over 20 years providing design and

manufacturing services to major oilfield equipment and service corporations. Our engineers are inventors on many industry patents. Sanmina Oil & Gas has delivered

nearly a billion dollars worth of hi-tech equipment with excellent performance.

Sanmina’s Oil & Gas manufacturing team ensures that your finished product

will work as intended. Our manufacturing specialists and engineers make sure we

understand your product, so that it performs as designed. With a solid design engineering group available, you can rest assured your

product will be in good hands.

Sanmina Oil & Gas has 20 years experience and is equipped with

specialized manufacturing capabilities for meeting the high tech and high reliability needs of

the Oil & Gas industry. We manufacture PCBAs, precision machined components

and complex electro-mechanical assemblies for downhole, surface and

subsea products.

MANUFACTURING AND ENGINEERING SERVICES FOR YOUR MISSION CRITICAL PRODUCTSThe Sanmina Oil & Gas Division was established in 2013 with the acquisition of a machining and mechanical assembly plant in Monterrey, Mexico. Founded in Silicon Valley in 1980, Sanmina is a major global manufacturing and engineering services provider with over 75 locations worldwide. In 2015, Sanmina acquired the CST Group in Houston. CST Group came to Sanmina with an established track record of over 20 years, providing manufacturing and engineering services to major oilfield services and equipment suppliers. In addition to Sanmina’s Oil & Gas locations, Sanmina also provides a broad range of mechanical and electrical engineering and global manufacturing resources. Division being the front line.

MANUFACTURING & ENGINEERING SERVICESFOR YOUR MISSION CRITICAL PRODUCTSWhen It All Matters . . .

Sanmina Oil & Gas has extensive experience providing high-tech

engineering services to bring your product to commercial realization.

Offering mechanical, electrical, software and systems engineering design services, we can help bring

your new product to market rapidly. Our engineers have helped our customers secure many of our

industry’s most important patents.

With two locations, Houston Texasand Monterrey Mexico, Sanmina Oil

& Gas achieves the highest standards for your precision machining and mechanical assembly needs. Equipment

includes CNC lathes and mills, wire and sinker EDM, gun drilling,

boring, honing, induction heat treating and much more.

MANUFACTURING ENGINEERING MACHINING

We specialize in mission critical products where the cost of failure can exceed the cost of the equipment.

Most of our clients are among the largest oilfield services or equipment providers.

For more information: sanmina.com

WHEN MORE THAN JUST “BUILT-TO-PRINT” MATTERS

WHEN A PROVEN TRACK RECORD MATTERS

Sanmina Oil & Gas has a proven track recordof over 20 years providing design and

manufacturing services to major oilfield equipment and service corporations. Our engineers are inventors on many industry patents. Sanmina Oil & Gas has delivered

nearly a billion dollars worth of hi-tech equipment with excellent performance.

Sanmina’s Oil & Gas manufacturing team ensures that your finished product

will work as intended. Our manufacturing specialists and engineers make sure we

understand your product, so that it performs as designed. With a solid design engineering group available, you can rest assured your

product will be in good hands.

NORTH AMERICA2700 North First StreetSan Jose, CA 95134Phone: +408.964.3500Fax: +408.964.3440

EUROPE & MIDDLE EASTLerchenstrasse 191710 GunzenhausenGermanyPhone: +49.(0)9831.51.0

www.sanmina.comSanmina Corporation is an EEO/AA employer©2018 Sanmina Corporation. All rights reserved. Sanmina® is a registered trademark of Sanmina Corporation. All other trademarks and product names used in this publication are for identification purposes only and may be trademarks of their respective owners.

SOUTHEAST ASIANo 2, Chai Chee DriveSingapore 469044SingaporePhone: +65.6245.7300

ABOUT SANMINA CORPORATIONSanmina Corporation is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the medical, communications networks, defense and aerospace, industrial and semiconductor systems, multimedia, computing and storage, automotive and clean technology sectors. Sanmina has facilities strategically located in key regions throughout the world.

For more information, visit www.sanmina.com.

OIL AND GAS DIVISION MANUFACTURING AND ENGINEERING SERVICES

GREATER CHINAKader Industrial Building, 5th Floor22 Kai Cheung RoadKowloon Bay, Hong KongPhone: +852.2305.1800Fax: +852.2799.2398

HoustonMonterrey

San Jose