1. 1. Group 9 Zheng Wang Syamil Zakaria Essam Alsaleem Kong Wang Md Nahid Parvez Group 9 Instructor Mr. Jrgen Schleppi
2. 2. Maximum Opening Limited to 65mm No Provision for Replaceable Jaws Long Securing Time Volumetric Constraints: Within 150x400x100mm (width x length x height) Provision for Maximum Opening: 100mm - Rapid Securing Time - Eliminate Drawbacks of the Original Design No Provision for adding replaceable jaw faces
3. 3. Initial Concept Concept Evaluation & Embodiment Design: A: We concerned about this section as this was not a strong design B: Unnecessary slot Final Design Concept Back JawHandle Moveable Middle Jaw
4. 4. Minimum tool Variance Total Manufacturing Time: Around 4.5 Hours
5. 5. We kept machining in the redesign vice to meet with the current machining setup of TORMACH INC as the machining in our design matches with other existing designs of TORMACH. Our Design meets the Design Objectives. Around $ 230- $ 250