CURRICULUM VITAE

Mallikarjun Rao.E Sr.Electrical Design Engineer

Ph: +91 95505 94176 E-mail: mallieee28@gmail.com

Personal Information Nationality: Indian

Date of Birth: November 01, 1981

EducationB. E in Electrical and Electronics Engineering

2004

University of Madras Chennai, India

Languages English, Hindi, Tamil, Telugu.

Trainings 6S and Lean Management.

Software Skills Computer literate conversant in MS OFFICE, worked with Lighting utility software like DIALUX, SUNLUX and conversant with AUTOCAD and Micro Station and ETAP.

Summary of Work Experience

Overall Detailed work Activities

Over Ten (10) years of experience in Design and Engineering as Electrical Engineer for Electrical Projects for Oil & Gas, Building Services, Mining, EPC for SAUDI ARAMCO and SEC related Projects.

Familiar with Feed and Detailed Design related aspects for Projects and having expertise in Cable Routing Selection, Equipment Instrument Specification, Energy Conservation and Safety. Experienced in Electrical and Instrumentation design of large plants.

Review of Client Scope of work and Prepare Planning schedule for timely completion of Electrical works.

Discuss with the Process Dept and Finalize on Electrical Loads. Preparation of Electrical Load List. Sizing of Electrical Equipment as required for the Project. Design of Overall One Line Diagrams, Power Layouts & Panel

Schedule for Various plants and buildings. Design of Fire Alarm Layouts. Preparation of detailed cable & conduit layout drawings. Preparation of Area classification drawings. Preparation of Scope of Work and Technical Specifications. Review Vendor Drawings as per client requirement and

standards. Coordinating with Surveyors for Route Survey report for T&D

projects. Procurement of Hardware & materials required for 33 KV,132

KV, 220 KV Transmission Lines and Substations and CT, PT, CVT, Conductor etc.,

Liaising with Electricity Department Officials for Inspection of works and approval.

Preparation of Technical Comparison Sheet for Brought out items and rate the vendors according to technical competency.

Preparation of I/O List. Outdoor & indoor AC & DC lighting layout drawings preparation. Cable sizing calculation and preparation of MTO. Preparation of Fire alarm system layout and grounding layout

drawings. Study the design drawings and documents in accordance with

the required standards. Feedback & coordination with Project Managers. Guiding the draftsmen for timely completion of all Electrical

related drawings. Inter department coordination for achieving better quality of

products and production. Managing Documents related to the Project.

Work Experience

Aug 2013 – To date A. Al-Saihati, A. Fattani & O. Al-Othman Consulting Engineering Co (SOFCON)

Al Khobar

Engineer II, Technical Operations

Initial Duties and Responsibilities:

Assigned in the Engineering and Projects Department of SOFCON dealing with various Saudi Aramco projects and Non Aramco projects.

Reporting to the project manager dealing with various Saudi Aramco projects and Non Aramco projects.

Details of Projects Completed :

ER-34-01514 (Ongoing Greenfield Project): (Unconventional Gas’s Industrial Support Facilities Project) Working as Senior. Electrical Design Engineer for Saudi Aramco Project under “Unconventional Gas’s Industrial Support Facilities “ design of electrical distribution system for overall site and buildings under ISF.

This involves the Preparation of Electrical One Line Diagrams, Power, Lighting, Grounding & Cable Route Layouts, Cable schedules, Panel Schedules, Electrical Calculations for equipment sizing, DG sizing, Cable sizing, Lighting etc., Technical specification / data sheets, Material Take Offs, Fire Alarm System drawings, Electrical Details etc. The jobs involved 13.8/.480 kV switchgears, MV / LV distribution, electrification of buildings, Indoor / outdoor lighting, Street/Area lighting and Fence lighting etc.

BI-10-01901 (Ongoing Project): (Khursaniyah Upstream Non-Associated Gas Facilities Project) Working as Electrical Design Engineer for Saudi Aramco Project under “Khursaniyah Upstream Non-Associated Gas Facilities Project “ which involves the gathering and transportation the gas from the production headers to Fadhili Gas Plant.

The Electrical scope for this project includes design of electrical distribution system for the Gas Gathering Manifold, Scraper trap areas, Valve stations and associated works like Pad mounted transformers, Pole mounted transformers, Switch racks, Power panel (PP), UPS, lighting contactor panel, dry type transformers, supply to motors, cathodic protection system and motor operated valves (MOV’s), Jib cranes and power supply to vendor supplied RTU components.

B-213167 (Training and Development Institute in Riyadh Project) Worked as Electrical Design Engineer for the Saudi Electricity Company project under “Training and Development Institute” which involves the design of Lighting, Power, Grounding, Fire alarm Layouts for the Following buildings:

A two (2) story administration building (approximately 19,200 s.q.m. floor area). Seven (7) workshop buildings (approximately 21,000 sq.m. total floor area). Mosque (approximately 500 sq.m. floor area). Pre-engineered buildings for Reverse Osmosis (R.O.) Plant & HVAC system (approximately 2, 500 sq.m. footprint).

BI-10-01506 (Khurais Central Processing Facilities Increment Project) Worked as Electrical Design Engineer for the Saudi Aramco extension project under “Khurais Central Processing Facilities” which involves the design of

Two Construction facilities camps for about 620 (520 + 100) Saudi Aramco employees involving accommodation and other utility buildings in addition to site office buildings. Extension of existing permanent accommodation buildings. Process Interface buildings, security buildings etc and security fence lighting extension in the existing Central Processing facility area.

Feb 2012 – Aug 2013

Mineral & Metal Technologies (MMT) Visakhapatnam, India

Electrical & Instrumentation Design Engineer

Initial Duties and Responsibilities:

Assigned in the Engineering and Projects Department of MMT dealing with various Mining and Port related projects.

Reporting to the project manager.

Review Indian standards and Procedure used in its previous projects.

Check previous projects design and specifications and review the design work of engineers within the section particularly the Electrical & Instrumentation works design. Details of Projects Completed :

Design of Electrical & Instrumentation system of 1.5 MTPA Iron ore Grinding plant of M/s JAYASWAL NECO INDUSTRIES Ltd.

Design of Electrical & Instrumentation system of 1.35 MTPA Iron ore

Beneficiation plant of M/s USHA MARTIN Ltd.

Design of Electrical & Instrumentation system of 1.5 MTPA Iron ore Beneficiation plant of M/s Arya Group.

Nov 2009 – Jan 2012 Vertex Engineers (VE) Hyderabad, India

Electrical Design Engineer

Initial Duties and Responsibilities:

Assigned in the Engineering and Projects Department of VE dealing with various EPC, Transmission & Distribution related projects.

Reporting to the project manager.

Review Indian standards and Procedure used in its previous projects.

Details of Projects Completed :

Design of Earthing, Indoor & Outdoor lighting scheme for Container

yard at KRISHNAPATNAM PORT Company Ltd, Krishnapatnam,

Nellore.

Selection & Sizing of LT Transformers, Cables, Earthing and Lighting

systems design at Greentech Industries, Naidupeta, A.P.

Erection Supervision, Testing of 6 no’s of 33/6.6 KV Switchgear at

KRISHNAPATNAM PORT Company Ltd, Krishnapatnam, Nellore.

Erection and Testing of Electrical Panels at 8 MW Co-Gen Power

Plant of ADITYA BIRLA Group at Panvel, Mumbai.

Cable route design & Cable Scheduling of 8 MW Co-Gen Power

Plant at KSSKR (Sugar Factory) at Kolhapur, Maharashtra.

Jan 2007 – Oct 2009 Deepthi Electrical Works (DEW) Sriharikota, India

Electrical Engineer

Initial Duties and Responsibilities:

Assigned to Projects Department of DEW dealing with various EPC projects.

Reporting to the Sr Engineer.

Review Indian standards and Procedure used in its previous projects.

Details of Projects Completed :

Various sites within the Facility of ISRO, Sriharikota.

Jun 2004 – Dec 2006 Apache Footwear India Pvt Ltd (APE) Sullurpeta, India

Team Leader, Business Department

Initial Duties and Responsibilities:

Assigned to Order Management Team under Business Dept of APE

Reporting to Manager.

Review of Adidas Policies for Order Management, Procurement and Logistics.

Detailed Work activities :

Order Management. Procurement. Logistics

References

1.) Mr. S.Sugumar, Chief Electrical Engineer, SOFCON Consulting Engineering Group, Al Khobar, Saudi Arabia.

Ph: +966 508807221 Email: ssugumar@hotmail.com

2.) Mr. G.Nagarjuna Rao, Project Manager (Client Side),

Ardee Engineering, Hyderabad, Telangana, India

Ph: +91 99893 14415 Email: gnagarjuna14415@gmail.com

3.) Mr. Sunil Arekapudi, Managing Partner, Vertex Engineers, Hyderabad, Telangana, India.

Ph: +91 9866313181 Email: ve_engineers@yahoo.com