light-duty trolley commercial operator
TRANSCRIPT
3 Year PartsWarranty
LC 1000
The LC 1000 light–duty trolley commercial operator is a feature-rich system that is designed for a smooth operation of doors up to 14ft high with a faster open and close cycle, built to last and guaranteed to provide years of smooth, trouble-free operation. It features a maximum run timer, a programmable mid-stop, a timer-to-close, a safety reversal system and an advanced drive system. Its advanced digital Easy Operating System (EOS™) provides a user-friendly set up which makes for a more efficient and faster installation.The direct current (DC) Smart Motor, coupled with a belt or chain drive system, ensures an amazingly quiet operation.
Light-Duty Trolley Commercial Operator
Light system (optional)
™
Twice as many cycles/hr
compared to leading brands!
LC 1000 Specifications (Sectional Door Applications Only)
Power Supply: 120 VAC/60 HzControl Voltage: 24 VDCMotor Voltage: 24 VDCThermal Protection: AutomaticLine Cord: 6ft (3-Prong)
The best in advanced engineering and materials. One semi closed fully assembled drive system with a 14 Ga. (2 mm) heavy duty, high strength galvanized steel finished C-rail, available with a steel-reinforced belt or a full steel chain.
Drive system configuration availability:• 7ft, 8ft, 10ft - chain or belt• 12ft, 14ft - Belt OnlyDrive system overall length fora 7ft. door: 10’-5”
Door Heights Supported: 7ft, 8ft , 10ft, 12ft and 14ft.
Headroom ClearanceRequired: 1¼”Trolley: Includes emergencyrelease, easy reconnect
Self Learn Force System:• Monitors and controls motor
force every cycle (Smart Motor™) to optimize operation force requirementsSoft Start/Soft Stop:
Self-Diagnostic System:• LED error code indicator for a more efficient (quicker) installation and system troubleshooting
Warranty: 3 year on parts
Light system (optional)
Electrical
Operator Features
Drive System (Rail)
Travel Rate-Main: 6.3 in/secService-Duty: 19 cycles/hour (complete full door cycles)Push & Pull force:1000 Newton
Receiver: Modular, wireless code learningFrequency: 315MHz (Homelink® compatible)Technology: Multibit code
Radio Controls (optional)
Safety and Convenience
Force adjustment:
Independent
up/down if
required
Limit Settings: ElectronicClass II - Low Voltage Connections: Quick Connect Terminals
9002/60 .veR 20308 .oN traP
Copy
right
© M
aran
tec
Amer
ica C
orpo
ratio
n 20
09
www.marantecamerica.com
Marantec America Corporation5705 Centerpoint Court • Gurnee, IL 60031p. 847.478.1500 • f. 847.478.0348
IDAInternational Door Association
* Horsepower comparable in strength (HPCS™), using lifting force specifications to a 1HP garage door operator.
* Marantec reserves the right to make design and technical specifications changes without notice Patents: 4 625 291, 4 88 531, 7 009 592 (other patents pending)
(1 HPCS™)*
Logic Type: Microprocessor with Built-In Surge Suppressor
Display: 8-LED Operation/ Diagnostic system
Operator weight: 10½ lbs
Dimensions: 14½” x 8 3/8” x 6”(L x W x H)
Wired Controls3-button industrial control station. Momentary contact to open and stop with constant contact to close with lock feature.
• Easy Operating System (EOS™) • External devices Quick Connect
Terminals located on the rear of the operator for an easier and quicker installation.
•Meets and exceeds all UL 325 requirements
• Pre-wired to accept photoelectric sensors, radio controls, and lighting system.
™
Protection rating: NEMA 1 (IP20)
• Safety reversal (sensing technology) system, door stops from closing upon contacting a person or object.
• Manual emergency release in case of power failureProgrammable mid-stop, On-Command Door Activation (OCDA™), programmable “open” mid-stop position allows the door stop during open travel at any point
•
Maximum Run Timer – Protects against damage to door and operator, door stops and reverses
Electronically Controlled - Prevents premature door and operator wear and provides quieter operation
Advanced plug-in design compact fluorescent light (CFL) system. One (1) bulb, 14W Max – not provided (equivalent to a 60W incandescent). The light fixture has an integral high impact, heat resistant, UL recognized plastic, lens cover.
• Timer – to – close feature with programmable timers; photo eyes required
System reset function clears the system memory and restores default system settings
•
• Adjustable light timer from 30 seconds to 4 minutes 30 seconds.
75% reduction in energy usage with CFL lighting system
•
3-Button Industrial Control Station
3-button control station. Momentary contact to open and stop with constant contact to close. Open/close/stop functionality with lock capability.
Accessories
Remote Activation (optional)
Remote activation of door by transmitter requires: • Photo Eye Sensor System
Non-impact, advanced Infrared Safety Sensors reversing system. Complies with all UL 325 requirements and safety regulations.
• Digital Remote Control Transmitter Unique, multi-bit technology, LED control button verification.• Modular Receiver Patented concept where the receiver is simply plugged into the unit.
New Location of Connection Terminals for External Devices/Accessories and Modular Receiver Antenna
Innovative concept where the receiver moduleand all external devices/accessories are connected on the rear of the operator, providing quicker installation, and easier connectivity verification.