life science catalogue sciences catalogue.pdf · cleanroom consumables such as wipers, gloves,...

Life Science CatalogueProducts and Services for Cleanrooms, Sterile Roomsand Controlled Environments

Including sterile products!

Dear Customer,

if you demand the highest standards for your cleanrooms and controlled production areas and at the same time seekto realise potential savings across your total supply process, basan is the right partner for you.

The basan group is one of the leading distributors of cleanroom products and services in Europe and Asia. This is ensuredsince over 25 years by our qualified staff in the subsidiaries and logistics centres in Belgium, France, Germany, Italy,Malaysia, Netherlands, Singapore, United Kingdom and Vietnam.

With a range of 4500 qualitatively high-value products, we offer you the whole range of cleanroom equipment:cleanroom consumables such as wipers, gloves, stationary, packaging material and disposable garments, reusablegarments and floorings, and including furniture and technical equipment.

We have at our disposal a worldwide network of well-known suppliers, and we keep a wide range of high-quality yeteconomical products ready for you. This ensures optimum and effective contamination control and the protection ofcleanroom personnel.

The new basan catalogue gives you an overview of our extensive range. As well as our comprehensive product range,we show you how we can support you every day through our FULL SERVICE CONCEPT with various consultancy andservice offerings.

From the fitting out of your production areas to the training of your personnel, from logistics services to completesystem integration – we work out a concept optimally tailored for you!

Worth knowing in advance

Product range

As one of Europe’s largest distributors of cleanroom products, we have a worldwide network of well-known suppliers at our disposal, and

we keep a wide range of top-quality products ready on hand for you. The catalogue presents a large part of the products available on the

market. Our staff ensures that the product range stays up to date by permanent worldwide product scouting. If you are looking for a

particular product, please ask our sales team, who will give you skilled and friendly advice.

Cleanroom classes

To ease your search for the right product for your particular application, we indicate – as far as is possible – the cleanroom classes in which

the specified products can be used. This recommendation is based on the information provided by the manufacturer and the material

properties of the product, and does not imply the availability of test reports, certificates, or validation documentation.

The allocation is indicated by means of 6 color marked fields which are numbered from cleanroom class 1 / ISO 3 to 100.000/ ISO 8. The

corresponding area of application for the product is indicated by color.

Example for application

≥ class 10/ ISO 4

If you have any cleanroom class related questions regarding the suitability of products in a specific manufacturing environment, please

contact our sales team.

Ordering

Our catalogue is a source of information, and therefore does not contain order numbers.

Because cleanroom applications are in many cases very specific, we would be pleased to

discuss with you which product is suitable for your specific application. Our sales team will

be pleased to prepare an offer for you, tailored to your requirements.

basan online

At www.basan.com you will find further interesting and current information – product

innovations, special offers, dates of seminar and trade fairs, new service offers, novelties

from basan and much more.

For your security – our quality management system

Our aim is to ensure the consistent high quality of our products, processes, and services.

A significant requirement for this is the permanent implementation of an effective and

efficient quality management system as per DIN EN ISO 9001:2000.

We measure the successful and continuing improvement of our enterprise and quality

targets against defined process indicators. These are adapted and further developed in

response to the on-going changes in the company and in the cleanroom market.

Contact

+49 6192 9986-0

[email protected]

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4

Recommended application in cleanroom classes:

4

Table of Contents

01 Services

Creation of cleaning, disinfection and hygiene plans 6

Creation of glove and wiper plans 7

Performance measurement of cleanroom flooring 7

Training of cleanroom personnel 8

Gowning room concepts 9

Logistics services 9

Decontamination and leasing of cleanroom garments 10

The basan FULL SERVICE CONCEPT 11

02 Reusable Garments

Overview: An Optimal Garment System 13

Garments 14Fabrics, Decontamination, Washing, Sizing 14Coveralls, Facemasks, Hoods 15Overboots, Overshoes 16Coats, Headwear 17

Under Garments 18Fabrics, Washing, Sizes 18Integrity 1000, Jersey 19Interlock, Socks 20

Accessories 21Safety Glasses 21

03 Disposable Garments

Protection of Products and Operators by Disposable Garments 22

Fabrics 22

Coveralls 23

Coats 24

Hoods 25

Facemasks 26

Overshoes 27

Aprons l Sleeves l Beard Covers 28

04 Gloves and Fingercots

Overview: Application Categories 29

Disposable Cleanroom Gloves 30Latex and Nitrile 30PE, PU, Vinyl, Synthetic 31

Disposable Cleanroom Gloves (dispenser box) 32Latex and Nitrile 32

Fingercots 32Latex and Nitrile 32

Textile Gloves 33Knitted Versions, Glove Liners 33

Protective Gloves 34Chemical Resistant, Heat Resistant 34

05 Footwear

Overview : DIN-Standards 35

Pantolettes l Sandals 36

Slippers l Laced Shoes 37

Safety Shoes 38

Shoes for Wet Areas 39

06 Wipers and Swabs

Overview 40

Dry Wipers 41Polyester, Polyamide, Nonwoven 41Polypropylene, Microfibre 42Foam, Cotton 43Dispenser Systems 43Dry Wipers – sterile 44

Pre-wetted Wipers 45Polyester, Polypropylene, Nonwoven 45

Swabs 46Knitted Polyester 46Nonwoven, Foam 47TOC – Cleaning Validation Kit 48Chemical Resistance of the Various Swab Materials 49

07 Stationery

Cleanroom Paper 50

Notebooks 50

Clipboards 51

Ring Binders 51

Adhesive Tapes and Labels 51

+-

5

13 Equipment

Chairs 76

Stools 79

Tables 81

Shelving l Cabinets 82

Utility Carts l Garment Racks 83

Sitoverbenches l Waste Bins 84

Examples for gowning room equipment 85

14 Components

Laminar-Flow Units 86

Horizontal Flow Hoods l Vertical Flow Hoods 87

Vertical Flow Tunnels l Vertical Hoods 88

Wet Processing Equipment 89

Desiccators 90

15 Packaging

Tyvek®-Packaging 91

Transparent Paper Packaging 91

Polyethylene Packaging 92

Antistatic Polyethylene Packaging 92

16 Ionization

Overview: Ionizers and Ionizing Air Guns 93

17 Miscellaneous

Sole Cleaning Machine 94

18 Alphabetical Index

08 Mats and Flooring

Peel-off Mats 52

Permanent Mats 53Protectamat 53Labmat, On Roll Mats 54

Flooring 55Clean Zone, Work Zone 55Performance measuring of cleanroom flooring 55

Cleaning Tools 56Cleaning Products, Dyclean, Dygiene 56Cleaning System Vikan 56

09 Cleaning Tools

Overview: Sinner’scher Kreis 57

Cleaning Equipment-Stainless Steel 58Single-and Double-Bucket Systems 58

Mop Frames l Mop 59

Cleaning Equipment-Plastic l Mop Frame 60Double Bucket on Rollers, Mop Frame 60

Mop Covers 61

10 Detergents and Disinfectants

Sterile Detergents and Disinfectants for Surfaces 62, 63

Non-Sterile Detergents and Disinfectants for Surfaces 64

Non-Sterile Detergents and Disinfectants for Skinand Hands 65

11 Vacuum Cleaners

Overview: Suction Capacity, Filtration 66

Hand Devices l Carrying Devices 67

Dry Vacuum Cleaners 68

Wet Vacuum Cleaners l Dry Vacuum Cleaners 69

Explosion Proof Vacuum Cleaners 73

12 Storage Systems

Modular Storage Cabinets 74

Stainless Steel Dispenser 74

Sterilizing Containers 75

To ensure integrated supply and consultancy, basan offers a number of services and an optimum supply concept for all your requirements,

in addition to the comprehensive range of products.

Our range of services:� Creation of cleaning, hygiene and disinfection plans

� Creation of glove and wiper plans

� Performance measurement of cleanroom flooring

� Training of cleanroom personnel

� Gowning room concepts

� Logistics services

� Garment concepts including decontamination and leasing

� The basan Full Service Concept, including analysis of requirements.

The basis of every service is an analysis of your specific requirements and of the onsite circumstances. This includes a gap analysis combined

with an inspection of plant and cleanrooms. And thus our services are not static; instead they are adapted as required to changing

circumstances.

The training which we offer is highly practice-oriented and always takes into account the currently applicable regulations.

Creation of cleaning, disinfection and hygiene plans

The purpose of a cleaning, disinfection or hygiene plan is to define the responsibilities in the cleanroom. It contains a lucid, easily under-

stood presentation of the ‘what’, ‘when’, ‘how’, and ‘with what’ cleaning is to be carried out and ‘who’ is responsible for the cleaning.

The creation of cleaning, disinfection or hygiene plans requires

not only knowledge of which areas and surfaces to be cleaned,

but above all the knowledge of the effects of the cleaning agents

applied.

Benefits for you:� Optimisation of the range and the composition

� of cleaning agents and disinfectants

� Cost saving

� Time saving

� Making work easier.

6

01 SERVICES

01

SE

RV

ICE

S

7

01SERVICES

Creation of glove and wiper plans

Because of the differing requirements placed on gloves and wipers in the cleanroom and in controlled environments, a wide range of pro-

ducts is used.

basan supports you in the choice of suitable products. The aim is to optimise the multiplicity of gloves and wipers used, taking into account

the applicable regulations, standards and the state of the art.

Benefits for you:� Optimisation and reduction of the product range which you use

� Cost saving

� Simplified handling

� Clear documentation

� Increased work safety for your personnel

Performance measuring of cleanroom flooring

Particles have a basic tendency to settle on surfaces. This effect relies on varying adhesive forces and is greatly encouraged by the room’s

airflow. In this case, the floor and fixed flooring represent the final location upon which contamination can remain.

It is precisely in connection with pre-cleaning or dust fixing of particles adhering to shoe soles that the use of flooring from Dycem is

recommended. The adhesive action, and thus the effectiveness of the Dycem flooring, should therefore be checked at regular intervals.

Because it is heavy traffic combined with a high degree of contamination and inappropriate cleaning that in fact causes even high quality

flooring to undergo a significant reduction in adhesive effect.

Although when new, the use of these flooring prevents 99% of the

demonstrable contamination in the cleanroom, the particle trapping

performance can fall below 50 % after two and more years.

Therefore, if the intention is to prevent the entry of particles into the

cleanroom, it is recommended to test the efficiency of the flooring

at regular intervals by means of a special measuring apparatus.

We will be pleased to conduct such a measurement of efficiency at

your site.

Please see section 8, page 55 for more information on the

measuring procedure.

01

SE

RV

ICE

S

8

01 SERVICES

01

SE

RV

ICE

S

Training of cleanroom personnel

A significant factor in quality assurance of the production process is the qualification of your personnel.

New personnel, and those already working in the cleanroom, must constantly adapt themselves to the requirements and circumstances of

cleanroom operation, and must be regularly trained in this respect.

The training is not merely a matter of echoing the specific work content and guidelines on behaviour, but specialist knowledge must also

be conveyed und refreshed. This motivates and simultaneously increases the efficiency of your staff.

An overview of our training:� Hygiene (definition, regulations and guidelines, various aspects of hygiene, measures)

� Basics of microbiology (overview of micro-organisms, main infective diseases, pathogens and symptoms, protective measures, combating)

� Sources of contamination and cross contamination

� Accompanying measures to avoid contamination (physical hygiene, cleanroom garments, the process of changing garments, man as a

� source of contamination, waste handling)

� Cleaning and disinfection measures

� Skin protection (functions of the skin, skin protection, skin care, hand cleaning, skin care plan)

� Safety (rules for handling cleaning and disinfection chemicals, protective equipment, hazardous materials, environmental protection,

� storage, operating procedures, hazardous material symbols, product labelling)

� Gowning procedures / locking in and out (sequence and technique of putting on and taking off cleanroom garments, locking in and out

� correctly)

� Training on cleanroom garments (explanation of the various materials, application according to cleanroom classes, functionality of the fabric)

Benefits for you:� Your own personnel spend less time in preparing, executing and following up the training

� Psychological effect – the acceptance of external trainers is often greater than of colleagues

� Staff who have undergone frequent training experience new content and methods of presentation

A considerable number of customers has already attended our training courses. We are pleased to provide a list of references upon request.

9

01SERVICES

Gowning room concepts

A decisive element of cleanroom technology when designing new facilities or during reconstruction is the personnel air-lock area, which in

itself defines the entire cleanroom gowning area and – if present – the air shower area.

For it is here that contamination transfer into production areas is at its greatest – where often several hundred people in several shifts per

day lock in and out. Apart from the reduction of contamination risk, a well planned layout of the personnel flow also has a positive effect

on the investment costs.

We support you in the planning and advise you in terms of design for the (re)construction of your personnel air-lock(s).

In addition, we work together with internationally famous suppliers of gowning room equipment, who investigate your specific requirements

(spatially and ergonomically).

Benefits for you:� You use our know-how from projects with

� similar requirements

� You have increased certainty in your

� budget planning.

Logistics services

Our logistics area is where basan ensures

the permanent availability of the defined

cleanroom consumables and additionally

assumes all administrative and logistic

functions, such as consumption planning,

local stock keeping (inventory management)

and material and transport arrangements.

This equally includes various options for

electronic order transfer, up to and including complete system integration – and here basan itself uses SAP as the inventory control system

and offers an IT platform which is compatible with the SAP industry standard.

Benefits for you:� You have 100% certainty of delivery and supply, and absolute transparency over available material stock levels

� You achieve cost saving potentials through the optimisation of the interfaces between purchasing, storage and production

� You create freedom for yourself, so that you can concentrate solely and entirely on your core business

Example of AutoCAD drawing

01

SE

RV

ICE

S

01 SERVICES

10

Decontamination and leasing of cleanroom garments

You define your specific requirements for a garment concept. We advise on the choice of suitable materials, models and styles – for both

functionality and comfort and considering both technical and economic features.

We help you to create a suitable garment concept and to integrate the management of cleanroom garments into your internal processes.

This also includes the optimisation of already existing garment concepts.

We recommend to you a suitable leasing partner who is specialised in the expert decontamination and sterilisation of cleanroom garments

and will make you a professional leasing proposal including wardrobe service.

With our leasing partners, we offer you the following services:

� On-site collection of used cleanroom garments

� Decontamination and sterilisation using up-to-date procedures

� Marking of garments for traceability and stock control (electronic tracking using barcoding is possible)

� Expert repairs or no-charge replacement of damaged garments

� Packaging of decontaminated garments under cleanroom conditions

� Return of garments including wardrobe service

Benefits for you:� You have a one-stop shop for garments and leasing service

� After each decontamination a measuring protocol is being created for quality assurance purposes, and the functionality of the textile is

� being tested - so at all times you have certainty about the cleanroom suitability of your garments.

01

SE

RV

ICE

S

11

01SERVICES

The basan FULL SERVICE CONCEPT – an optimum supply concept for your cleanroom products

The basan FULL SERVICE CONCEPT gives you all the products for your cleanrooms and controlled production environments from a ‘one-

stop shop’ – and even more.

The first step: The requirements analysis

You specify the cleanroom products which

you use and the annual consumption.

basan provides a free of charge analysis of

the prices and quantities and prepares an

individual proposal for you. The effects of

scale, but also the use of alternative pro-

ducts can lead to significant savings.

The second step: Total supply in 3 modules

Based on the results of the requirements

analysis, you select the right Full Service

Module in close consultation with our staff.

Module 1: Umbrella agreement

Module 2: Consignment store

Module 3: Total supply

Full Service Online

You can also use our FULL SERVICE CONCEPT online to make your ordering and logistics process

more efficient. Would you like to send us your order electronically? Or would you like to create

a company-internal electronic ordering platform? We will be happy to develop the individual

solution for you!

Module 1 Module 2 Module 3

100 % security of supply and deliveries x x x

Cost reduction through volume purchasing x x x

Back-up stock in basan central stores x x x

Cost reduction by reducing your administration costs x x x

in purchasing, logistics and accounting

Access to 3 central stores and 8 external stores worldwide x x x

Additional back-up stock at the manufacturer x x x

Credit note administration: basan checks the invoices x x x

Definition of the logistic process x x

Stock at customer's site, administered by basan x x

Goods remain the property of basan (and are not invoiced) until taken x x

Customer defines the minimum and re-order quantities x x

Stock withdrawal by the customer results in automatic re-stocking x x

Complete stock administration x x

Planning of materials and execution of transport x x

Reports and statistics of movement of goods x x

Proactive adjustment of re-order quantities based on actual usage x x

Use of basan internal (SAP supported) logistic systems through tox

complete system integration if required

Thorough and automatic paperless processes x

Control of material flows through bar-code recognition x

User 1

User 2

User 3

User 4

Ordering

(*e.g. SAP Enterprise Buyer Professional)

Customer basanIntranet/online-Shop* SAP system

Product information

Order

Customer basanERP system SAP system

Quantities usedGoods in and out

Support of customer’s own online shops (e-catalogues, intranet)

Customer basanERP system SAP system

Calculation of minimum stock levels,statistics, analysis’ ofusage, stock replenishment

Electronic transmission of your order to basan

SAP system integration

We will be delighted to provide

you with further information in

a personal discussion!

01

SE

RV

ICE

S

12

basan online

Do you already know the benefits of basan online?

The basan info basket:

With the info basket function , you can request detailed information on all basan products and services at the basan website – very

easily per just one click!

Expert publications:

In addition to the product descriptions in this product catalogue, you’ll find presentations of basan products as well as articles written by

cleanroom experts on our website.

Event tips:

basan is regularly present at important trade fairs and offers seminars or conferences on special topics. Where and when?

-> Please look at www.basan.com

www.basan.com

13

02REUSABLE GARMENTS

Quantus® – an Optimal Garment System

Garments are an essential factor in protecting the product from particulate and microbiological contamination through humans in controlled

environments.

Consequently, a well designed garment system that demonstrates certain technical and functional characteristics is an absolute requirement.

The material is permeable to water vapour which, together with a generous fit, offers maximum comfort.

The standard product range Quantus® includes: � Garments

� (coveralls, hoods, facemasks, overboots /overshoes, coats, headwear)

� Under garments

� (T-shirts, jackets, trousers, socks) We will be pleased to submit

a quotation for leasing!

High-quality workmanshipThe workmanship is orientated to

the requiremnts of the cleanroom

application.

By applying lap seams we assure a

high-output of tight and secure

seam-enclosure.

Lap seam

High quality fabrics� 100% polyester containing an ESD-stripe

� High wearing comfort

� Long life cycle

� Antimicrobial finish

� Twill and taffeta weave available

� Optionally available with Teflon HT

Traceabilityof the garments by indicating the

manufacturing date and optional

chip encoding.

Suitable for decontaminationand autoclavable

Sizing from XXS – XXL*All sizes are generously proportioned, allowing

complete freedom of movement even when worn

over full clothing. For an optimum fit overshoes are

also available in – between size ML.

* The sizes are based on experiental values and are not binding.Samples are available to determine correct sizes.

Individual designEnsures optimal fit and functionality

of the garments.

02

RE

US

AB

LE

GA

RM

EN

TS

Technical and functional features of our fabrics are tested by independent institutes

� Institut für Textil- und Verfahrenstechnik

Denkendorf (ITV)

� Forschungsinstitut Hohenstein

(garment physiology aspects)

* Tests were applied to fabric Integrity 1700. Detailed test results are available upon request.

*

Quantus®

02

14

REUSABLE GARMENTSGarments Quantus®

DecontaminationCleanroom garments require special decontamination processes. The difference to normal

cleaning methods is that mechanical friction is minimized to protect the fabric. The low-

particle is achieved through special washing processes.

The first natural wear out* of the garments can already occur after 100 wash cycles, in spite

of optimal decontamination. If in addition to mechanical wear stress and decontamination, a

sterilization treatment is also added, the life cycle of the garments decreases to approx. 70

washes.

*Because there are currently no recognized testing procedures for determining resistance to aging, we can only providenon-binding experiential values.

SizingThis information is for guidance only.

Samples are available upon request to determine correct sizing.

Sizes XXS XS S M ML L XL XXL XXXL

Coveralls /Coats - Women 36 - 38 40 42 44 - 46 48 - 50 52 - 54

- Men 44 46 48 50 - 52 54 - 56 58 - 60 62 - 64 66 - 68

Open Face Hoods / Flat Hood 53 - 55 cm 57 - 58 cm 59 - 60 cm 61 - 63 cm 64 - 65 cm

(head circumference)

Overshoes* (appr. sole length) 38 - 39 40 - 43 44 - 47

Overboots (appr. sole length) 34 - 35 36 - 38 39 - 41 42 - 43 44 - 46 47 - 49

*The sizes can fit differently according to which shoes are worn in the overboots or overshoes.

Special sizes are available!

10000ISO 7C

1000ISO 6

100ISO 5A/B

10ISO 4

10000ISO 7C

1000ISO 6

100ISO 5A/B

02REUSABLEGARMENTS

Detailed information and

samples as well as further

fabrics and colors are

available uponrequest!

Fabrics

Fabric Weave Weight Surface Recommendedresistance cleanroom classes

Integrity 1700 Tafetta Approx. 95 g /m2 108 - 109 Ohm*

Texclean 6 (T6) Twill Approx. 113 g /m2 108 Ohm

*Garments made from our standard fabric Integrity 1700 are optionally available

as ESD-protective version!

Our standard fabric Integrity 1700 meets the requirements of Oeko-Tex Standard 100.

Washing instruction

Washing at 60°C

Do not bleach

Iron using low temperature setting;caution when ironing with steam

Use of standard detergents

Dry with reduced heat

Autoclavable: 122°C/20 min

��

��

15

02Garments Quantus®

REUSABLE GARMENTS

Coverall with Open Face Hood and Facemask

Flat Hood

Coveralls

Features:� Lap seams for tight and secure seam-

� enclosure

� Front zipper (double covered)

� High collar with press stud

� Adjustable elastic waistband

� Comfortable Raglan style

� Antistatic knitted cuffs

� Press studs at ankles

� Press studs on left breast; white

� PES clipband

� Stitched collar patch with label

� Hanger in collar

� Loop for attaching pens, mobile phones,

� ID’s, etc.

Facemasks

Features:� Press studs for attaching to the hood

� Universal size

Open Face Hoods

Features:� Large head attachment

� Front zipper

� Shoulder protection

� Optimal fit through adjustable snap

� fastener in back

� Comfortable ear net insert

� Press studs to attach facemask to the

� inner side of the hood

� Press studs to height adjustment

Available Standard Sizes: XS - XL

Optional Features:� Clip or ties in back

� Coding and /or corporate logo printing

� Also available as eyes-only hood

Sizes: XXS - XXL

Special sizes available!

Optional Features:� Antistatic knitted cuffs at ankles

� Clipband of cleanroom fabric

� (printed /unprinted)

� Individual printing: Corporate logo,

� name, codes, etc.

� Additional loops

Optional Features:� Velcro strip for attaching to the hood

� Available with gauze insert

Flat Hood

Features:� Flat head attachment

� Other features like open face hood

Flat Hood – side and back view

Open Face Hood

02

RE

US

AB

LE

GA

RM

EN

TS

16

02 Garments Quantus®

REUSABLE GARMENTS

Overboots with PES-ties

Overshoe

Overboots

Features:� High Design

� Front zipper

� Elastic band below knee with adjustable press studs

� Adjustable snap fastener at instep height

� Light grey plastic sole (cut resistant, waterproof, autoclavable)

� Polyester band boost between sole and texture

Sizes: XS - XL

Optional Features:� PES-ties at knee and ankle height

� Additional clip at instep height

Overshoes

Features:� Low design

� Elastic band on upper side

� Press studs for width adjustment

� Flexible plastic sole

� (cut resistant, waterproof)

Sizes: M - XL

Optional Features:� Cut resistant /non-slip, antistatic rubber

� molded soles (autoclavable)

� Medium height (above ankle)

Overboots

In-between size ML

available for optimum fit!

02

RE

US

AB

LE

GA

RM

EN

TS

Optional Features:� Coat with press studs in front with /

� without pockets

� Coat with zipper without pockets

� Clipband of cleanroom fabric

� (printed /unprinted)

� Individual printing: Corporate logo,

� name, codes, etc.

� Loops for attaching pens, mobile phones,

� identification passes, etc.

17

02Garments Quantus®

REUSABLE GARMENTS

Coat with Cap “Bouffant Style”

Headwear “Bouffant Style”

Coat, green

Coats

Features: � Lap seams for tight and secure seam-

� enclosure

� Two-way front zipper (double covered)

� High collar with press stud

� Comfortable Raglan style

� Antistatic knitted cuffs

� Press studs on left breast; white PES

� clipband

� Left breast pocket

� Two hip pockets

� Stitched collar patch with label

� Hanger in collar

Sizes: XXS - XXXL

Headwear “Bouffant Style”

Features:� Elastic band for size adjustment (in back)

� Press studs for width adjustment

� Universal size

02

RE

US

AB

LE

GA

RM

EN

TS

02

18

Under Garments Quantus®

REUSABLE GARMENTS

02

REUSABLE

GARM

ENTS

In order to optimize your individual garment system and to comply with specific cleanroom class requirements, we recommend the use of

under garments.

High quality cotton/polyester-blends that minimize loose fibers are available. Additional comfort is achieved through optimal moisture and

heat transport. Besides physiological aspects and comfort, aspects of hard-wearing work clothes as well as CI-requirements and modern

styles and colors are becoming more and more important when choosing under garments.

The product range includes:� T-Shirts (long and short sleeves)

� Sweatshirts

� Trousers

� Jackets

� Socks

Fabrics

Fabric Composite Weight Color Special features

Jersey 65% cotton/ 175 g/m2 White Hard-wearing and keenly35% polyester Additional colors available low-maintenance function ware:

PES inside/Cotton outside

Interlock 60% polyester / 215 g/m2 Navy Hard-wearing, keenly20% cotton/ Additional colors available low-maintenance and elastic20% modal meshes ware

Integrity 1000 100% polyester 86.5 g/m2 Navy Antistatic + antimicrobial(Microfibre) with Carbon Additional colors available equipped, keenly softer feeling,

tightly texture tie,low pore size

SizingThis information is for guidance only.

Samples are available upon request to determine correct sizing.

Sizes XS S M L XL XXL XXXLT-Shirts, Jackets, Trousers

- Women 32 / 34 36 / 38 40 / 42 44 / 46 48 50 52 / 54

- Men 38 / 40 42 / 44 46 / 48 50 / 52 54 / 56 58 60 / 62

Datasheets available

upon request!

Special sizes available!

Washing instruction

Washing at 40°C

Do not bleach

Iron using medium temperature setting,caution when ironing with steam

Use of standard detergents

Dry with reduced heat

��

19

02Under Garments Quantus®

REUSABLE GARMENTS

Sweatshirt and Trousers (Integrity 1000)

T-Shirt (Jersey)

Sweatshirt (Integrity 1000)

Features:� Lap seams for tight and secure seam-enclosure

� Antistatic

� Long sleeves

� Knitted cuffs

� Round neck, knitted


� Color: marine blue

� Fabric: Microfibre (100% Polyester with Carbon)

Sizes: XS - XXXL

Trousers (Integrity 1000)

Features:� Antistatic

� Wide, double-stitched comfort waist band

� Rubber band at ankle height


� Color: marine blue

� Fabric: Microfibre (100% Polyester with Carbon)

Sizes: XS - XXXL

T-Shirt (Jersey)

Features:� Functional clothing

� Short sleeves

� Round neck

� Bordered cuffs

� Logo imprint / stitchery upon request

� Easy cut for optimal comfort

� Color: white

� Fabric: 65% cotton /35% Polyester

Sizes: XS - XXXL

02

RE

US

AB

LE

GA

RM

EN

TS

20

02 REUSABLE GARMENTS

Jacket and Trousers (Interlock)

Inner cord and cord stopper

Jacket (Interlock)

Features:� Full length front zipper

� Kimono sleeves for high comfort

� Two zipped pockets

� High collar

� Rubber band at wrists

� Knitted cuffs

� Rubber waist band

� Color: marineblue

� Fabric: 60% Polyester /20% cotton /20% modal

Sizes: XS - XXL

Trousers (Interlock)

Features:� Two zipped pockets

� Waist band with inner cord and cord stopper

� Rubber band at ankle height

� Color: marineblue

� Fabric: 60% Polyester /20% cotton /20% modal

Sizes: XS - XXXL

Socks

Features:� Low abrasion

� Washable to 30°C

� Hight approx. 16 cm

� Colors: white or lightblue

� Fabric: 100% Polyamid

Sizes: Unisize

Socks

02

RE

US

AB

LE

GA

RM

EN

TS

Under Garments Quantus®

21

02Accessories

REUSABLE GARMENTS

Autoclavable Safety Glasses

Safety Glasses Astrospec

Autoclavable Safety Glasses

Features:� Completely autoclavable

� Material: polycarbonate glass

� Elastic silicone band

� Ventilation system on the upper frame

� High comfort

� Alternative slices available

Unit: single packed

Safety Glasses Astrospec

Features:� Material: high impact – resistent polycarbonate

� With integral side protection

� Product and operator protection

� Reusable

� Can be desinfected

� Color: black / yellow

Unit: 5 pieces

02

RE

US

AB

LE

GA

RM

EN

TS

Protection of Products and Operators by Disposable Garments

Disposable garments are often a supplement to the reusable garments, and the application goes from operator protection to product

protection.

It is hardly possible to recommend a cleanroom class for the products, because disposable garments are in most cases not cleanroom

processed. Low particulate and extractable levels are not given.

A complete range of disposable garments is available in different materials, styles and sizes.

03 DISPOSABLE GARMENTS

22

Fabrics

Tyvek® (TY) Cleanroom compatible Antistatic, tear-resistant, Available colors: whitefor class ≥ 100.000 breathable, suitable for (Sterile, cleaned designs splash-protectionavailable upon request)

Polypropylene (PP) Not specifically designed Antistatic, breathable Color: whitefor cleanroom use

Polyethylene (PE) Not specifically designed Suitable for spray protection Colors: white, bluefor cleanroom use (no absorption)

Nonwovens (NW) Not specifically designed Breathable Color: whitefor cleanroom use

Increasing

particle

emission

Facemasksprotect against human contaminants

(from the mouth and throat area).

Materials: Blend of polypropylene,

polyethylene and nonwovens

Coveralls / Coatsprotect sensitive products

as well as operators.

Materials: Tyvek®, polypropylene

Hoods / Beard Coverprevents dissipation of hairs and dandruff.

Materials: Tyvek®, nonwovens

Sleevesprotect the forearms from splashes.

Materials: Tyvek®, polypropylene, nitrile

Overshoes / Overbootsfor contamination control:

� To avoid entering of contaminants from

external areas

� For visitors and operators who are entering

the cleanrooms for short periods, to be worn as

protective shoecovers over regular shoes

Materials: Tyvek®, polyethylene, polypropylene or

polyethylene/polypropylene blends

03

DIS

PO

SA

BL

E G

AR

ME

NT

S

Tyvek®-Coverall Classic Plus

23

03DISPOSABLE GARMENTS

Tyvek®-Coverall Classic

Polypropylene-Coverall

Tyvek®-Coverall Classic and Industry

Features:� Covered front zipper (plastic)

� Elastic waistband, adjustable in the back

� Elastic cuffs and trouser hems

� Bound seams

� Color: white, further colors upon request

� As version “Classic” with hood (elastic band for perfect fit)

Sizes: S - XXL

Unit: 25 pieces ( single packed)

Tyvek®-Coverall Classic Plus

Features:� Integrated socks to wear in safety shoes

� With hood

� Sterilizable

� Available in green upon request

Sizes: S - XXXL

Unit: 25 pieces (single packed)

Polypropylene-Coverall

Features:� Covered front zipper (plastic)

� Elastic waistband, adjustable in the back

� Elastic cuffs and trouser hems

� Bound seams

� With hood (elastic band for perfect fit)

� Color: white

Sizes: M - XXL

Unit: 50 and 100 pieces ( single packed)

Tyvek®-Coverall Industry

03

DIS

PO

SA

BL

E G

AR

ME

NT

S

Sterile versions available!

03

24

DISPOSABLE GARMENTS

Tyvek® Coat Tyvek® Coat

Features:� Plastic press studs

� Knee-length

� 2 hip pockets

� Color: white

Sizes: L - XXL

Unit: 25 pcs (single packed)

Polypropylene Coat

Features:� Plastic press studs

� Knee-length

� 2 hip pockets

� Color: white

Sizes: L - XXL

Unit: 50 pcs (10 packages with 5 pcs each)

Polypropylene Coat

03

DIS

PO

SA

BL

E G

AR

ME

NT

S

25


Sizes/Circumference � 53 cm (PO 05)

� 58 cm (PO 13)

� 61 cm (PO 15)

Unit: 500 pcs

Size: universal size

Unit: 10 x 100 pcs

Size: universal size

Unit: 200 pcs

Nonwoven Hood

Astro Hood

Tyvek® Open Face Hood

Clip CapNonwoven Hood

Features:� Breathable

� Elastic closure

� Also available as clip cap

� Color: white

Astro Hood

Features:� Breathable tearproof material

� Integrated sweat band

� Comfortable

� Open view field

� Color: green

Tyvek® Open Face Hood (HB-TY01)

Features:� Elastic closure

� Can be used as splash guard

� Color: white

03

DIS

PO

SA

BL

E G

AR

ME

NT

S

03

26

DISPOSABLE GARMENTS

Additionally available: � Extra wide versions

� Sterile versions

� Single packed versions

� Head strap version available

� Face veils

Unit: 50 pcs (in dispenser box)

Unit: 50 pcs (in dispenser box)

Unit: 1500 pcs (single packed or as bulk

packaging available)

� Additionally availabe with neck guard,

� in order to minimize particles around

� the neck

� Size: 305 x 105 mm

� Color: white

Unit: 200 pcs (cardboard box)

Facemasks – General features:� Inner and outer facing material:

� Skin-friendly, nonwoven

� Various filter media (polypropylene,

� polyester, etc.)

� Superior filtration efficiency

� Good barrier against particles

� Long wearing comfort through excellent

� breathability (low differential pressure)

� Adjustable nose band

� Without fiberglass, non allergenic

� Colors: white, blue or green

� Optionally available with earloops or ties

Facemask BN

Features:� Earloops

� Size: 180 x 95 mm

� Color: blue

Facemask Type 1

Features:� With ties

� Size: 180 x 95 mm

� Color: green

Facemask (broad version)

Features:� Earloops

� Size: 210 x 90 mm

� Also available as sterile version (single packed)

� Color: white

Sterile Facemask “BioClean DB”

Features: � Pouch style assures high wearing comfort

� Free breathing

� Material: Polyester, seams are sealed with

� ultrasonic

� The holding band is simply drawn over

� the head, so putting on the mask is

� facilitated

Good breathability and superiorfiltration efficiency

Particles Bacteria

Information about filtration efficiency (BFE +PFE) as well as differential pressure (delta P) isavailable upon request.

Datasheets available

on request!

Facemask Type 1

Facemask (broad version)

Sterile Facemask “BioClean DB”

Facemask BN

03

DIS

PO

SA

BL

E G

AR

ME

NT

S

27


Product Details Packaging

Tyvek® Overshoes Thickness: approx. 0.13 mm

UF-TY-15 Low: 15 cm (white) 500 pcs

UM-TY-21VS Medium: 21 cm (white) 200 pcs

UH-TY-50 (boots) High: 50 cm (white) 200 pcs

Polyethylene Overshoes Thickness: approx. 0.1 mm

UF-PE-17 Low: 17 cm (blue) 200 pcs

UM-PE-25 Medium: 25 cm (blue) 200 pcs

UH-PE-55 (boots) High: 55 cm (white) 600 pcs

Heavy Duty (410.150) Thickness: approx. 0.07 mm

Low: 15 cm (blue or white) 300 pcs

OSD Thickness: approx. 0.04 mm

Low: 15 cm (blue) 2.000 pcs

Polypropylene/ Thickness: approx. 0.1 mm

Polyethylene Low: 16 cm 1.000 pcs

Overshoes (CPE/PP) Non-slip sole

(blue or white)

breathable upper material

(white)

Conductive Nonwoven Thickness: approx. 0.02 mm

Overshoes Low: 16 cm (white) 1.000 pcs

Low: 18 cm (white)

Tyvek® Overboots

Polyethylene Overshoes Heavy Duty

Polypropylene/Polyethylene Overshoes CPE/PP

Conductive Nonwoven Overshoes

Tyvek® Overshoes

Overshoes

General features:� Non-slip sole

� Elastic band at ankle height

� Boots are tied around ankle

� Universal size

� Conductive versions available

03

DIS

PO

SA

BL

E G

AR

ME

NT

S

Color: white

Thickness: 0,13 mm

Unit: 100 pcs

Color: blue

Thickness: 0,20 mm

Sizes: only available in Large

Unit: 12 pcs

Color: white

Length: 45 cm

Unit: 400 pcs

Color: white

Length: 60 cm

Unit: 400 pcs

Color: white

Sizes: Universal

Unit: 1.000 pcs

Tyvek® Apron

Nonwoven Beard Covers

03

28

DISPOSABLE GARMENTS

Sleeves

03

DIS

PO

SA

BL

E G

AR

ME

NT

S

Tyvek® Apron (SZ-TY-00)


� Material: Tyvek®

Apron, Chemical Resistant (CAL-8)


� Material: Vinyl

Tyvek® Sleeves (AS-TY-02)

Features:� Elastic adjustment on both sides

Nonwoven Sleeves (with polyethylene coating)

Features:� Elastic adjustment on both sides

Nonwoven Beard Covers

Features:� Material: Nonwoven

� Good barrier ability against particles

� Breathable

29

04GLOVES AND FINGERCOTS

04

GL

OV

ES

AN

D F

ING

ER

CO

TS

Textile Gloves(packed in polybags):· Knitted synthetic fibers

(coated, uncoated, conductive)

· Cut resistant

Stitched gloves available!

Disposable Gloves(Dispenser box):· Latex

· Nitrile

Other materials are

available on request

Protective Gloves (packed in polybags):· Chemical resistant

· Heat resistant

· Cut resistant

Fingercots(packed in polybags):· Latex

· Nitrile

Disposable CleanroomGloves(packed in polybags):· Latex

· Nitrile

· Vinyl (PVC)

· PE and PU nonwoven

Cleanroom application:Critical environment

Suitable for cleanroom class > ISO 4

Controlled environment(clean manufacturing environment):

Suitable for cleanroom class > ISO 8

Samples available!

Tip:We strongly recommendto test the gloves inpractical applicationbefore choosing a specific model!

In cleanrooms, gloves and fingercots are used to protect sensitive products and also

operators from contamination.

Performance requirements relating to technical and functional needs such as grip,

comfort and length vary and influence glove selection for the different applications.

Application Categories

04 Disposable Cleanroom Gloves

GLOVES AND FINGERCOTS

30

Latex Gloves

Features:� Natural or synthetic rubber (natural colors)

� Low protein content minimizes the risk of latex allergy

� Highly elastic, powder-free

� Low particulate and extractable levels (multiple washing)

� Resistant to a wide range of chemicals

� Textured finger tips

� Rolled cuffs

� Very good mechanical properties

� Ambidextrous /Sterile version handspecific

� Cleanroom packed (in polybags)

� Extra long versions available

Product Details Unit

Latex Glove Sizes: S - XL 1.000 pcs

(ambidextrous) Length: approx. 30 cm (10 x 100 pcs)

Thickness: approx. 0.12 mm

Sterile Latex Sizes: 6 - 9 /S - XL 200 or 300 pairs, depending on

(handspecific) Length: approx. 30 cm/40 cm model


Nitrile Gloves

Features:� Copolymer made of butadiene and

� acrylonitrile (white)

� Nonallergenic

� Elastic, powder-free

� Low particulate and extractable levels (multiple washing)

� Antistatic versions available



� Rolled cuffs

� Good resistance to aging

� Good mechanical properties

� Ambidextrous

� Cleanroom packed (in polybags)

Product Details Unit

Nitrile Glove Sizes: S - XL 1.000 pcs

(ambidextrous) Length: approx. 30 cm (10 x 100 pcs)

Thickness: approx. ca. 0.12 mm

Sterile Nitrile Sizes: 6 - 10 300 pairs

(handspecific) Length: approx. 30 cm/40 cm


Gamma sterilisation with

batch/lot- documentation.

Sterilization information on

each box (Latex and Nitrile).

Latex Glove

Nitrile Glove

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4


100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4


04

GL

OV

ES

AN

D F

ING

ER

CO

TS

31

04Disposable Cleanroom Gloves


Sizes: 6 - 9 (in-between sizes are available)

Thickness: approx.0.02 mm

Length: approx. 30 cm

Unit: 20 x 10 pairs

Sizes: S - XL


Unit: 10 pair


Length (M): approx. 30 cm

Length (L): approx. 31.5 cm

Sizes: M, L

Unit: 100 pcs

Thickness: 0.30 mm


Sizes: S - XL

Unit: 10 pcs (5 pairs)

PE-Folienhandschuh

PU Nonwoven Glove

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B


100 000ISO 8

D

10 000ISO 7

C

1000ISO 6


Vinyl Glove, extended sleeves

Synthetic Glove

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

Recommended application in cleanroom classes:Synthetic Glove - Sterile

Features:� Copolymere made from nitrile and neoprene

� Powder free and gamma ray sterilised

� Handspecific

� Low particulate and extractable levels

� (multiple washing)

� Protein free

� Texturized fingertips

PU Nonwoven Glove

Features:� Polyurethane nonwoven

� Powder free



� Good grip and fit

� Hypoallergenic

� Vapor permeable, breathable

� Reusable

� Washable up to 40°C

PE-Glove

Features:� Textured polyethylene film, transparent

� Powder-free



� Good grip and fit

� Ambidextrous

Vinyl Gloves, extended sleeves

Features:� Polyvinylchloride

� Powder-free


� Ambidextrous

� Sleeve with elastic band and eyelet for

� ventilation

� Texturized fingertips

� Cleanroom packed

� Washable at 40°C

� Color: white

04

GL

OV

ES

AN

D F

ING

ER

CO

TS

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B


04 GLOVES AND FINGERCOTS

32

Colors: white (Latex) /blue (Nitrile)

Thickness: approx. 0.38

Length: approx. 24 - 28 cm

Sizes: S - XL

Unit: 1000 pcs (10 x 100 pcs)

Thickness: approx. 0.08

Sizes Latex: S - XL (white)

Sizes Nitrile: S - L (white)

Unit Latex: 1.440 pcs

Unit Nitrile: 720 pcs, cleanroom packed

Only suitable for use in

controlled environments

(not cleanroom compatible)!

Disposable Glove

Disposable Gloves in dispenser boxes

Latex Fingercots, regular

Nitrile Fingercots

Disposable Gloves (dispenser box)

Features:� Available in Latex or Nitrile

� Ambidextrous

� Elastic and powder free

� Textured fingertips

� Rolled cuffs


� Excellent mechanical features

� Nitrile gloves are tear resistant and resistant

� to a wide range of chemicals

Fingercots

Features:� Available in Latex or Nitrile

� Rolled

� Very elastic, powder-free


� Silicon-free


� Very good mechanical properties


100 000ISO 8

D

10 000ISO 7

C

1000ISO 6


04

GL

OV

ES

AN

D F

ING

ER

CO

TS

33

04GLOVES AND FINGERCOTS

04

GL

OV

ES

AN

D F

ING

ER

CO

TS

Textile Gloves

Fit: Use as liner glove

Top Fit: For precise work executed in the fingertip area

Palm Fit: For precise work. Avoids palm perspirationcontact.

Half-finger Version – Use as liner glove

Full Hand – Use as liner glove

Sizes: Universal

Unit: 10 pairs

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6


Different brands available!

Knitted Versions

Features:� Synthetic fibers, knitted (Polyamide)

� Very good tactile feeling through seamless manufacturing

� Flexible, excellent fit

� Hand-specific (HS)


� Cuff color code to indicate size

� Washable at approx. 40°C

� Available with resistant polyurethane (PU) coating

� Available in versions: uncoated, coated fingertips, coated palms

Product Size Unit

Fit S - XL 10 pairs

Uncoated

Top Fit S - XL 10 pairs

Coated fingertips

Palm Fit S - XL 10 pairs

Coated palm

Glove Liners

Features:� Synthetic fibers, knitted

� Full hand (Polyamide)

� Half finger version (Polyester)

� Very good tactile feeling through seamless

� manufacturing

� Flexible, excellent fit



� Washable at approx. 40°C

� Also available in cotton

Chemical Resistant Protective Glove Trionic

34

04 Protective Gloves


� Offers good protection against: Isopropyl

� alcohol, hexane, methyl-butyl ether,

� pentane and many other chemicals.

� Chemical resistance chart available!


Length: approx. 35.6 cm

Size: 6 - 10

Unit: 12 pairs

Polyester/ Nylon

Features:� Protection for dry heat application

� up to 100°C


Sizes: 9 (Universal size)

Unit: single pairs available

Lengths: approx. 30 cm, 35.6 cm,

45.7 cm, 58.4 cm

Mitten length: 25.5 cm

Sizes: Universal size (available as women’s

pattern / men’s pattern)

Chemical Resistant Protective Glove Trionic(Tripolymer of nitrile, neoprene, latex)

Features:� Elastic, powder-free



� Textured finger tips for better grip

� Straight cuff




� Recommended for ISO class 5

Heat Resistant Protective Gloves – dry application

Features:� Knitted of nylon or polyester /nylon

� Seamless

� Abrasion resistant, tear resistant, cut resistant

� Straight cuff


� Not Hand-specific (AMBI)

� Recommended for ISO class 4

Nylon

Features:� Protection for dry heat application

� up to 760°C

Length: approx. 35.6 cm

Sizes: Universal size

(available as women’s pattern/men’s pattern)

Also available in length 45.7 cm and as

shoulder protection in 68.6 cm

Heat Resistant Protective Gloves – wet application

Features:� Nylon knit interior

� Silicon coating as exterior protection

� Seamless

� Non-abrasive, tear resistant

� Straight cuff



� Recommended ISO class 4

� Protection for wet heat application

� up to 232°C

04

GL

OV

ES

AN

D F

ING

ER

CO

TS

Heat Resistant Protective Gloves – dry applicationpolyester / nylon

Heat Resistant Protective Gloves – dry applicationnylon

Heat Resistant Protective Gloves – wet applicationnylon / silicon

35

FOOTWEAR 05

05

FO

OT

WE

AR

� Dirt, moisture and temperature can

affect the electrical resistance of

footwear

� Electrical resistance should be regularly

tested on site.

In cleanroom environments, it is necessary to minimize the risk of accidents to personnel

by slipping, and also to prevent faults and downtime caused by the discharge of static

electricity. The correct footwear is necessary in addition to the installed plant, floor areas

and clothing.

Footwear is worn for many hours each day and must offer safety (for people and processes)

as well as comfort.

There are differences in the footwear for safety, protection and industry, which are designed

according to the following European standards:

DIN EN 61340-5-1: Protection of components sensitive to electrostatic charges / overall requirements

DIN EN 4843-100: Requirements on the safety and anti-slip test

DIN EN 344-1: Requirements and test methods for safety, protective and working footwear for

industrial use

DIN EN 345-1: Specification of the safety shoe for professional use

DIN EN 346-1: Specification of the protective shoe for professional use

DIN EN 347-1: Specification of the professional shoe for professional use

Waterproof footwear should be worn wherever large quantities of liquids are present. PU clogs or Microfibre shoes, which can be cleaned

and desinfected, should be worn. Where it is necessary to limit or prevent electrostatic charging, antistatic or ESD

protected footwear is essential.

Electrical Resistance

Detailed supplier catalogues

available upon request!

Illustrated Steel Cap

Pantolettes l Sandals

FOOTWEAR

36

05

Sizes: 35 - 46 (Model: 38600)

Sizes: 48 - 51 (Model: 38602)

Color: white

Sizes: 36 - 42

Color: white (Model: 36902)

ESD Pantolette/Clog

Features:� Upper material and inner lining: leather

� Fixed heel strap with velcro fastener

� Instep strap with elastic band

� Resistance to slip

� Perforated

� Without toecap

ESD- Women’s Sandal

Features:� Women’s comfort shoe, handmade

� Upper material and inner lining: leather

� Without toecap

� Replaceable reflexor footbed

� 3 adjustable instep straps with velcro fastener

� Anti- slip sole

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6


Model: 38600

05

FO

OT

WE

AR

Model: 36902

FOOTWEAR

37

05Slippers l Laced Shoes

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6


Sizes: 40 - 46


Sizes: 35 - 47


Sizes: 35 - 47


Model: 35707

Model: 32300

Model: 2600

ESD Slipper

Features:� ESD men’s comfort shoe

� Upper material and inner lining: leather

� Handmade

� Replaceable reflexor footbed


� Anti-slip sole

ESD Slipper

Features:� Upper material: leather and special lining


� Replaceable footbed

� Perforated

� Anti-slip sole

Laced Shoe

Features:� Upper material and inner lining: leather

� Air-cushion PU sole

� Replaceable footbed

� Anti-slip sole

05

FO

OT

WE

AR

Different insoles are available

05 Safety Shoes

FOOTWEAR

38

Sizes: 36 - 48

Color: white

Sizes: 35 - 46


Sizes: 35 - 48


PU Safety boot

Model: 31000

Model: 31031

100000ISO 8D

10000ISO 7C

1000ISO 6


PU Safety Boot

Features:� Boot with steel cap

� High durability

� 100% CFC-free PU-material

� Special antislip C1 sole

ESD Sandal

Features:� Upper material: leather

� Adjustable instep and heel straps

� With steel cap

� Heel patch in leather

� Snug fit

� Resistance to slip

ESD Safety Shoe

Features:� Upper material: leather

� Breathable air-mesh textile

� With steel cap

� Special inner lining perspiration-

� and moisture absorbent

� 2 adjustable velcro fasteners

� Replaceable gel insole

� Anti-slip sole

05

FOOTW

EAR

39

05Shoes for Wet Areas

FOOTWEAR

Sizes: 36 - 47


Sizes: 35 - 47


Sizes: 36 - 47


Sizes: 36 - 47

Color: blue (Model: 1302)

other colors on request

Special Shoe Lorica

Features:� Upper material: Lorica /Microfibre

� Water resistant, breathable

� Special sole with high resistance to slip

� Adjustable instep and heel straps

� Washable

� Decontaminable

� Antistatic

Special Shoe Lorica

Features:� Upper material: Lorica /Microfibre

� Perforated

� Water resistant, breathable

� Air cushion sole with high resistance to slip


� With footbed

� Up to 30 times decontaminable

� Antistatic

Special Shoe Lorica

Features:� Upper material Lorica /Microfibre

� Closed sturdy shoe

� Breathable

� Replaceable insole


PU-Clog

Features:� Material: Polyurethane

� Perforated/unperforated

� Washable up to 60°C

� Autoclavable

� Replaceable PU insole

� Also suitable as basis for a shoe with gaiters

Model: 8700

Model: 2370

Model: 1392

Model: 1302

100000ISO 8D

10000ISO 7C

1000ISO 6

100ISO 5A/B

10ISO 4


05

FOOTW

EAR

Wipers

Wipers are amongst the most important consumables in the cleanroom. They are integral to a complex cleaning process which removes

contaminants generally invisible to the naked eye and support the maintenance of good basic hygiene together with a clean visual impression.

To ensure efficient cleaning, the wipers must be able to absorb a wide range of surface contaminants in the shortest possible time and

without themselves distributing further pollution in the form of particles, fibres, ions or microbiological contaminants.

Because cleanroom requirements vary widely, the selected wipers must be appropriate to the application. The various materials and structures

of the wipers have a major effect on their technical and functional performance.

The first level of selection is:

� Dry Wipers

� Pre-wetted Wipers

� Sterile Wipers

06 WIPERS AND SWABS

40

Dry Wipers

06

WIP

ER

S A

ND

SW

AB

S

Polyester (PES)

Polyamide, Polypropylene

Cellulose-Polyester-Mix

Polyurethane foam, PVA* foam

Cellulose

Cotton

Completely sealed borders

Hot cut

Laser cut

Cold cut

Lowestparticle generation

Highestparticle generation

*Polyvinylalcohol

Polye

ster

41

06Dry Wipers

WIPERS AND SWABS

06

WIP

ER

S A

ND

SW

AB

S

Polyester Wipers

Features:� 100% continuous-filament knitted

� polyester, unfolded

� Single-layer or two-ply

� Low particle, low ion generation

� Soft

� Resistant

� Available in various weight classes

� Cleanroom laundered


� Available with sealed borders, hot cut,

� laser cut or cold cut edge

Polyamide Wipers

Features:� 100% polyamide (nylon)

� Single-layer, unfolded


� Tear resistant and durable

� Highly absorbent

� Cleanroom laundered


� Cold cut edges

Nonwoven Wipers

Features:� Nonwoven, folded or unfolded

� Single-layer


� Tear resistant

� Durable



� Not cleanroom laundered


Nonwoven wipers are available in the two following versions:

45% Polyester /55% Cellulose Blend

Suitable as standard wiper for dry and wet cleaning.

Wipers are also available in blue.

Suitable for

cleaning activities

in sensitive areas!

Suitable for general

cleaning activities!

Dimensions: 5 cm x 5 cm

10 cm x 10 cm

23 cm x 23 cm

28 cm x 31 cm

31 cm x 31 cm

46 cm x 46 cm

Packaging: Available as flat pack*

or bulk pack*

*Various packaging sizes available – depending on the

wiper dimension and type of packaging!


23 cm x 23 cm

25 cm x 31 cm

36 cm x 46 cm

Packaging: Available as flat pack*

*Various packaging sizes available – depending on the


Dimensions:10 cm x 10 cm

15 cm x 15 cm

23 cm x 23 cm

31 cm x 31 cm

46 cm x 46 cm

Packaging: Available as flat pack or bulk pack

* Various packaging sizes available – depending on the


100% Polyester

Suitable as optical precision wiper to clean and polish surfaces.

Very soft, hydroentangled, no abrasive (scratching / scoring) effect.

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4

1ISO 3


100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B


100 000ISO 8

D

10 000ISO 7

C

1000ISO 6


Also available on roll!

06

42

06 Dry Wipers

WIPERS AND SWABS

Polypropylene Wipers

Features:� Nonwoven, unfolded

� Single-layer or two-ply

� Structured and thermally bonded surface

� for maximum sorbency

� Durable


� Chemical resistant


� Not cleanroom laundered

Polypropylene wipers are available in the two following versions:

Polypropylene-Cellulose-Blend

Material: polypropylene-cellulose blend

Features:Outstanding absorption

due to the cellulose portion

Microfibre Wipers

Features:� Knit of synthetic fibres (for example

� polyester, polyamide or blends)

� Pre-shrunk with heat to provide high fibre

� density and good cleaning characteristics

� Low particle and ion generation

� Abrasive effect due to the hardness and

� shape of the fibres (edged, sharp or

� rounded)

� Cleaning effect through static charging

� Not temperature resistant

� Washable up to max. 60°C

Dimensions: 23 cm x 23 cm (Polypropylene-Cellulose

wiper)

31 cm x 31 cm (Polypropylene-wiper)

In larger dimensions available as floor

cleaning wiper

Packaging: available as flat back or bulk

pack

*packaging sizes depend on wiper dimension and type of

packaging

Polypropylene Wiper

Material: 100% polypropylene

Features:Chemical resistance to

stronger acids and alkaline solutions


Colors: in various colors available

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6


100 000ISO 8

D

10 000ISO 7

C


Microfibre Wipers

06

WIP

ER

S A

ND

SW

AB

S Suitable for general

cleaning activities,

particularly for floor

cleaning!

Suitable for precision

cleaning of sensitive

surfaces!

43

06Dry Wipers

WIPERS AND SWABS

Dimensions (L x W x H): 23 cm x 23 cm x 0.2 cm (PVA)

Packaging: available as flat pack*

or bulk pack*

*Packaging sizes depend on the wiper dimension and

type of packaging


15 cm x 15 cm

23 cm x 23 cm

31 cm x 31 cm

43 cm x 43 cm

Packaging: available as flat pack*

or bulk pack*

*Packaging sizes depend on the wiper dimension and

type of packaging

Plexiglass Dispenser

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6


100 000ISO 8

D

10 000ISO 7

C


Plexiglass Dispenser

06

WIP

ER

S A

ND

SW

AB

S

Suitable for removing coarse

and pasty contaminants!

Suitable in areas where

particle release is negligible,

as well as in areas with

higher temperature!

Foam Wipers

Features:� Material: Open pore foam,

�polyvinylalcohol (PVA)

� Available in hard or soft foam

� Solvent resistant (suitable for

� isopropylacohol)


� Also suitable as intermediate layer for � �

� transporting critical products

Cotton Wipers

Features:� Cotton, woven, long-staple

� Only suitable for areas in which particle

�release is negligible

� Tear resistant

� Good absorbency

� Generally heat resistant

� Low electro-static charging through

�hydroscopic characteristics

Dispenser

For a clean storage of your wipers plexiglass dispensers are available.

Features:� Material: Polymethylmethacrylat (PMMT)

� Thickness: 5 mm

� Transparent

� Milled

� Edges trimmed and polished

� Adhesive hinged aperture and 4 anti-slip gridding tabs to fix

� Pull-out in front

� Suitable for table dispensing

� Available in different sizes

06

44

06 Dry Wipers – Sterile

WIPERS AND SWABS

Sterile wipers are used in sterile rooms in the pharmaceutical industry. These wipers are

"ready to use" without the time consuming and cost intensive treatment required with

standard wipers.

Features:� Available in various materials

� Ready to use

� Small quantity packaging for immediate use (5 x 20 wipers per bag, 5 bags per box)

� Gamma irradiation incl. batch documentation (sterilization certificate on every box)

Product Dimensions Details

Polyester Wiper (TX 3215) 31 cm x 31 cm Two-ply, double-knit construction,

(sealed borders) low particle, low ion generation,

clean processed

Polyester Wiper (TX 3212) 31 cm x 31 cm Knitted single layer polyester,

(sealed borders) low particle, low ion generation,

clean processed

Polyester Wiper (TX 3211) 23 cm x 23 cm Knitted single layer polyester,

(cold cut edges) clean processed

Nonwoven-Wiper (TX 3210) 31 cm x 31 cm Single layer,

(nonwoven of 55% polyester / Resistant,

45% cellulose) good absorbency

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B


Polyester Wiper TX 3215

06

WIP

ER

S A

ND

SW

AB

S

45

06Pre-wetted Wipers

WIPERS AND SWABS

Pre-wetted wipers are effective and also save time. Spray flasks become unnecessary and

the presence of volatiles is minimized.

Features:� Ready-to-use with the correct dosage /concentration of detergent

� Wipers can be retained singly through interfold

� Various packaging sizes available for immediate use

� Resealable packing to maintain moisture

� Moistened with a mix of IPA /de-ionized water

� Available also in sterile version

Dimensions Packaging IPA-rate Sterile

31 cm x 31 cm Flat pack (TX 3280) 70 % IPA /

30 % WFI �

10 cm x 10 cm Bucket (TX 1034) 70 % IPA

15 cm x 15 cm Pack (TX 1036) 70 % IPA

23 cm x 23 cm Bucket (TX 1039) 70 % IPA

23 cm x 23 cm Flat pack (TX 1046) 6 % IPA

23 cm x 23 cm Flat pack (TX 1057) 10 % IPA

31 cm x 31 cm Flat pack (TX 3252) 70 % IPA �

23 cm x 28 cm Flat pack, folded wipers 70 % IPA

(TX 3216) �

20 cm x 13 cm Pack 6 % IPA

23 cm x 28 cm Flat pack, folded wipers 70 % IPA

(TX 3214) �

15 cm x 20 cm Refill pack, dispenser can 70 % IPA

(TX 3217)

Product

Polyester Wiper- sealed borders

Polyester Wiper- cold cut edges

Polypropylene Wiper

Nonwoven Wiper

The cleanroom classes are correspon-ding to dry wipers.

Polyester Wiper AlphaSat TX1036 (Flat pack) andTX 1039 (Bucket)

06

WIP

ER

S A

ND

SW

AB

S

46

06 Swabs

WIPERS AND SWABS

� Polyester� Nylon� Nonwoven� Foam with

100 PPI foam mantle� Cotton

� Polypropylene� Polypropylene / Nylon� Transflex®

(conductive plastic)

Application:Suitable for

cleaning validation

Application:Suitable for

cleaning validation

Application:Suitable for precise

and accurate work

Swabs are used to clean surfaces in the manufacturing area which are critical yet and difficult

to reach. They also have a valuable role, especially in the pharmaceutical industry, in the vali-

dation and verification of the cleaning process with documented evidence. For surfaces

which come into contact with products, the defined cleaning process is suited to reduce resi-

dual product and microbiological contaminants as well as cleaning residue to a predefined

level. In this way, all of the values which influence the degree of cleanliness are recorded and

evaluated under a worst case scenario.

Swabs are available with a wide variety of handle and head forms, also as an ESD version.

The swabs can be categorized according to:� Form

� Size

� Material (handle /swab head)

� Functionality (absorbency, particle emission and ion emission)

Knitted Polyester

Features:� Polypropylene handle in teal

� Low particle generation through

� hot sealed edges

� High chemical resistance

� High cleaning performance


TX 714 A

TX 761

TX 758 B

06

WIP

ER

S A

ND

SW

AB

S

All swabs are autoclavable!

TX 714 A

Dimensions:Head length: 25.7 mm

Head width: 12.7 mm

Handle length: 101.8 mm

TX 761


Head width: 6.8 mm


TX 758 B


Head width: 3.2 mm


47

06Swabs

WIPERS AND SWABS

Application:Suitable for use in the

optics industry

Application:Suitable for use in the

optics industry

Head material: polyurethane foam

Head material:polyurethane foam

TX 762

TX 759 B

TX 710 A

TX 712 A

TX 762


Head width: 6.8 mm


TX 759 B


Head width: 3.2 mm


This swab is also available in microfibre material and

recommended for wet and dry areas.

TX 710 A


Head width: 7.0 mm


TX 712 A


Head width: 12.7 mm


Nonwoven


� Low particle emission through

� hot sealed edges

� High chemical resistance

� Very soft material


Foam


� Low particle generation

� Good resistance to solvents and

� detergents

� Durable



06

WIP

ER

S A

ND

SW

AB

S

48

06 WIPERS AND SWABS

TOC Cleaning Validation Kit

The TOC (Total Organic Carbon) Cleaning Validation Kits have been designed to simplify

sampling for cleaning validation in the pharmaceutical industry. The kit can also be used

with Sievers, Tekmar Dohrman and Anatel A 2000 to measure TOC. The kit contains

components for sampling 12 resp. 72 different areas in the production area, and provides

an efficient transport of the samples from production to laboratory with minimal chance of

contamination.

The vials are manufactured, analyzed and certified to < 10ppb TOC by Eagle Picher and

show low TOC blank values. Certificates of analysis ensure traceability of the production

lots. The kit also includes labels so samples can be properly identified at the sampling site.

Features Swabs:� Material: knitted polyester

� Low particle generation

� Breakaway handle allows swabhead to be placed into vial with minimal handling and

� contamination

� Good absorbent capacity

� Very good chemical resistance

� Autoclavable to ensure sampling under sterile conditions

� Additional TOC-Kit Swabs (TX 714K) can be ordered

� Available with long handle (TX 761K)

Product Packaging

TOC-Kit: TX 3340 Vials: 12 pcs

Swabs: 24 pcs

TOC-Kit: TX 3342 Vials: 72 pcs

Swabs: 144 pcs

Swab TX 714K (included in TOC-Kit) 20 pcs

Swab TX 761K (with long handle) 20 pcs

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B


TOC Cleaning Validation Kit

Swab with breakaway handle

06

WIP

ER

S A

ND

SW

AB

S

49

06WIPERS AND SWABS

06

WIP

ER

S A

ND

SW

AB

S

Chemical Resistance of the Various Swab Materials

Chemical Head Material Head Material

Foam Polyester

Acetone x xx

Acetic Acid xx xx

Ammonia, anhydrous xx xx

Aniline x xx

Benzene x xx

Chloroform x xx

Chlorophenol – –

Chromic Acid – –

Cyclohexane x xx

Dimethylformamide – x

Dimethylsulfoxide – x

Ethyl Acetate x xx

Ethyl alcohol xx xx

Ethyl chloride x xx

Formic acid – xx

Hexane xx xx

Hydrochloric acid 48% – –

Hydrogen peroxide – xx

Isopropyl alcohol xx xx

Methanol x xx

Methyl Ethyl Ketone x xx

Methylene chloride x xx

Nitric Acid 100% – –

Nitrobenzene x xx

Perchloroethylene xx xx

Phosphoric acid 85% – xx

Sodium hydroxide 35% x xx

Sulfuric acid 98% – –

Toluene x xx

Trichloroethylene x xx

Vinyl acetate x xx

Water xx xx

Xylene x xx

xx = Good compatibilityx = Limited compatibility– = Not compatible

50

07

ST

AT

ION

ER

Y

Due to a complete range of cleanroom compatible paper, notebooks and other writing materials, there need to be no restrictions on the

recording and retaining of data and other information in cleanroom areas. Cleanroom paper has a smooth surface with minimal particles

and ions and thus reduces possible contamination in a clean production area. The paper is lightly colored for easy differentiation from

normal paper.

07 STATIONERY

Cleanroom paper

Features:� Accepts writing, copying and printing on

� all common office equipment

� Excellent retention of toners and inks

� Low particle and ion release

� Latex impregnated for optimal purity and

� smoothness

Product Weight Packaging

DIN A5 Light: 68 g / m2 20 x 250 sheets

Medium: 85 g / m2 20 x 250 sheets

Heavy: 104 g / m2 20 x 250 sheets

DIN A4 Light: 68 to 70 g / m2 10 x 250 sheets

Medium: 81 to 85 g / m2 10 x 250 sheets

Heavy: 104 to 110 g / m2 10 x 250 sheets

DIN A3 Light: 68 g / m2 8 x 250 sheets

Medium: 85 g / m2 5 x 250 sheets

Heavy: 104 g / m2 5 x 250 sheets

Computer-Paper 81 g / m2 1.500 sheets (continuous form)

Notebooks

Features:� Both sides of the sheets can be used

� Cleanroom paper to minimize particle

� contamination

� Available with spiral binding (white)

� Optionally available lined or grid

� Available in DIN A6, A5, A4

� Approx. 100 sheets

� Minimal static charging prevents pages

� from sticking

� Sterilizable

� Available in DIN A5, A4 and A3

� Various weights

� Available as standard in white and blue

� (A4 also available in pink, yellow and

� green)

Further colors and sizes

in american format are

available on request!

Cleanroom paper

Notebooks

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4


100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B


Our cleanroom paper

can be sterilized!

51

07

ST

AT

ION

ER

Y

Dimension: DIN A4

Dimension: DIN A4

Details:Color: transparent;

ESD version also

available in black

Dimension:Different lengths, widths and colors

Details:Roll length approx 3.3 m

Only available on roll

Dimension:Different dimensions and colors

Details: Roll with 1.000 labels

Only available on roll

07STATIONERY

Clipboard

Ring Binders

Adhesive Tapes and Adhesive Labels

Metal ring mechanism

Clipboards

Features:� Polypropylene

� Durable, resistant

� Clip mechanism at top or side

� Available in blue or white

Ring Binders

Features:� 100 % polypropylene

� (cleanroom compatible)

� Metal lever mechanism (55 mm height)

� and clamp made from metal

� Pressure pad

� Welded spine label (205 x 63 mm with

� score control below)

� Also available in ESD-Version in 100 %

� polyethylene (45 mm height)

Adhesive Tapes

Features:� Suitable for color marking, marking of

� surfaces, equipment, machinery, small

� parts: also suitable for bar code labels

� Strong grip

� Can be removed without residue

� Very low generation of particles and

� outgassing

� Plastic core

Adhesive Labels

Features:� Accept writing or printing

� Permanently fixed or removable

� Pre-printed labels available

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B


52

08MATSANDFLOORING

08 MATS AND FLOORING

Dust- and particle-collecting mats and special flooring to prevent contamination

Particles have a basic tendency to settle on flat surfaces, due to the varying adhesion factors throughout the cleanrooms and strongly influ-

enced by the airflow characteristics. The flooring is the final location where particles settle or remain as captured contamination.

Peel-off mats, permanent mats and special floor coverings are essential to control particle contamination. For optimal effective control of

contamination, the combination of permanent mats, special flooring and peel-off mats is highly recommended.

Peel-off Mats

Due to their strong adhesive effect, peel-off mats are installed to pre-clean. They prevent contaminants present on shoe soles and trolley

wheels from entering the cleanroom or other critical working areas.

Features:� 30, alternatively 60 layers

�White base, transparent layers

� (further colors available upon request)

� Self-adhesive base prevents slipping

� Low profile (approx. 1.5 mm for 30 layers,

� 2 mm for 60 layers) prevents tripping

� No cleaning necessary – dirty layers are

� simply peeled off

� Each layer is numbered, so the number of

� layers remaining is easily identified

Additional information:� The adhesive on each layer contains an

� antimicrobial agent, inhibiting bacterial

� growth on the mat.

Dimension (W x L):approx. 0.46 m x 1.17 m

Unit:8 mats /carton (F 30/45-8)

Dimension (W x L):approx. 0.64 m x 1.14 m

Unit:8 mats /carton (F 30/65-8)

4 mats /carton (F 60/65-4)

Numbered Layers

Peel-off Mat

100 000ISO 8D

10000ISO 7C

1000ISO 6

100ISO 5A/B

10ISO 4


53

08MATSANDFLOORING

Features:� Soft, mildly adhesive polymer material (load resistance is 40 kg /cm2)

� Loose-laid (no separate installation needed)

� Non-slip; suitable for all surfaces

� Good chemical resistance

� Easily cleaned with conventional detergents

� Free from flexibiliser (no outgasing)

� Antimicrobial additive inhibit microbial growth

Protectamat

Size (W x L):CC02/20/1 1.20 m x 2 m

CC02/30/1 1.20 m x 3 m

CC02/40/1 1.20 m x 4 m

Details:� Color: blue

� Thickness: 7 mm

� Incl. red leaders (width approx. 12 cm) at the short ends of the mat

� Loading capacity approx 40 kg/cm2

Accessories: with a sample of Dyclean, samples of absorbent wipers and acleaning guide

08Permanent Mats

MATS AND FLOORING

Permanent mats provide the highest level of cleanliness, they collect dust from the soles of shoes and trolley wheels. The life of the mats

strongly depend on the volume and degree of cleanliness of the foot and wheeled traffic. Solvent-based cleaning materials should on no

account be used on these mats: they will adversely affect both the function and the appearance. To avoid risk of slipping, it is also important

that both the mats and the flooring should be completely dry.

Protectamat

100 000ISO 8D

10000ISO 7C

1000ISO 6

100ISO 5A/B


Information ondetergents and

cleaning equipment on page

58

and in chapter9 and 10!

54

08MATSANDFLOORING

08 Permanent Mats

MATS AND FLOORING

Dimensions (W x L x H):1.20 m x 0.6 m x 5 mm

(without leaders)

Dimensions (W x L x H):1.20 m x 1.0 m x 7 mm

(with red leaders)

Non-Slip

Dimensions (W x L):0.40 m x 9.00 m

Details:� Permanently adhesive dust-collecting

� mat on roll

� Color: red or green

� Thickness: 2 mm

� Can be cut to size

�Without leaders

Labmat

Features:� Permanent sticky mat

� Color: blue

Accessories:� 5 samples Dygiene, a cleaning guide and

� absorbent wipers

On roll mat

Features:� Soft, mildly adhesive polymer material

� Loose-laid (no separate installation necessary)

� Non-slip; suitable for all surfaces

� Good chemical resistance

� Easily cleaned with conventional detergents

Typ P

Dimensions (W x L):1.00 m x 1.00 m

0.60 m x 1.20 m

Details:� Permanently adhesive dust-collecting mat

� Color: blue

� Thickness: 3 mm

�Without leaders

Labmat

Typ P

Non-Slip

100 000ISO 8D

10000ISO 7C

1000ISO 6

100ISO 5A/B


55

08

MA

TS

AN

DF

LO

OR

ING

08Flooring

MATS AND FLOORING

Clean Zone Premier

Features:� On roll

� Colors: blue (additional colors upon request)

� Free of plasticers (no outgasing)

� Application in cleanroom entrances and

� exits (load resistance is 70 kg /cm2)

� Installation necessary

� Installation instructions available upon request!

�

Work Zone Premier

Features:� On roll

� Colors: dark grey

� Free of plasticers (no outgasing)

� Application in heavy wheeled traffic areas/

� corridors (load resistance is 90 kg /cm2)

� Installation necessary

� Installation instructions available upon request!


A special measuring instrument – the Advanced Force Gorge (AFG) – was developed for

the easy and highly specific measurement of tension and compression forces in Newtons.

The measured Newtonian force is set in relation to the particle retention capacity and the

particle collection capacity of CleanZone and WorkZone, as illustrated in the table. The

higher the force in Newtons, the higher the particle retention capacity of the flooring.

The table contains typical readings for CleanZone measured with an AFG in relation to the

percentage of particles removed from a clean surface.

If the attraction force in Newtons is less than 10, then we recommend replacing the floo-

ring, since this corresponds to a maximum particle retention capacity of only 55%.

Note: The measuring procedure has not been designed or tested for any other contamination control floor products i.e.not peel off mats, or any other polymeric floor coverings than CleanZone and Workzone. Therefore we cannot guaranteeany readings taken on these floors.

Dimensions (W x L):2 m x 6 m

Thickness: 2.1 mm

Accessories: Black edging strip, Firmoflex

and Sigaway self adhesive tapes & cold weld,

sample of Dyclean incl. cleaning guide.

Dimensions (W x L):2 m x 6 m

Thickness: 2.1 mm

Accessories: Black edging strip, Firmoflex

and Sigaway self adhesive tapes & cold weld,

sample of Dyclean incl. cleaning guide.

Clean Zone Premier

Work Zone Premier

Tensile Value % of Particles

15 Newton > 99%

10 Newton 55%

7 Newton 45%

3 Newton 30%

2 Newton 20%

<1 Newton <10%


56

08 Cleaning Products

MATS AND FLOORING

08

MA

TS

AN

D F

LO

OR

ING

Cleaning Solution Dyclean

Features:� Concentrated cleaning fluid designed for general use

� Suitable for all surfaces

� Compatible with all materials

� Active agent: kationic tenside

� Quantity: 1 sachet = 50 ml (packaging = 100 sachet)

� Dosage: 1% (1 sachet x 5 ltr. water)

Cleaning Solution Dygiene

Features:� Same as Dyclean with bactericide

Cleaning System Vikan

Features:� Fully autoclavable cleaning system

� Anodised aluminium handle (can be autoclaved at 121°C)

� Polypropylene grip (can be autoclaved at 121°C)

� White rubber blade, length 40 cm (can be autoclaved at 100°C)

� The squeegee blade ensures a quick drying process without residues.

� The mat can soon be used without a danger of slipping.

Information about the cleaning of

mats and flooring in chapter 9 and 10!

Cleaning Solutions Dyclean and Dygiene

Cleaning System Vikan

57

09CLEANING TOOLS

09

CL

EA

NIN

G T

OO

LS

The cleaning process

The cleaning process is primarily dependant on four factors of the so-called “Sinner’scher

Kreis”. Cleaning tools and auxiliary materials are selected in consideration of these factors.

Furthermore, the nature of the surface to be cleaned determines the cleaning methods

employed.

Chemical

First the cleaning process is initiated through the help of active agents in the detergent.

Active agents ensure that the bonding forces are neutralized, so that the loose contami-

nants as well as the bonding contaminants can be removed. The water content serves in

this regard as a carrier substance for transporting the contaminants.

Time

This factor represents the period between the application of the detergent or the cleaning

bath and the take up of the dirt bath. In cleanrooms this factor can be almost disregarded, because on the one hand, a far lesser accumulation

of dirt can be expected compared to industrial flooring: on the other hand, based on the surface condition, often the wet wiping method is

used for cleaning.

Temperature

Certain types of contamination can be more effectively loosened with warm water rather than with cold water.

Mechanical

Through the use of optimal mechanical action, it is possible to reduce the start up time and thus accelerate the cleaning process. This factor

can be disregarded based on the “low” contamination. Only a manually attached mechanical action is employed with the wiping process

to keep possible particle generation or turbulence as low as possible.

Our product range offers:

� Cleaning systems (single- and double bucket systems)

� Mopheads

� Holders /Handles

„Sinner’scher Kreis“

Temperature Chemicals

Mechanical Time

58

09

CL

EA

NIN

GT

OO

LS

09 Cleaning Equipment Stainless Steel

CLEANING TOOLS

Single- and Double-Bucket Systems

Features:� Material: stainless steel

� Completely autoclavable

� (can be disassembled into individual parts)

� GMP conformant design

� Cleanroom compatibility ensured through

� long-term practical tests

� Available with mop and mop frame

� All versions with Ringo flat squeezer ES-CR

� CLINO CR2 can be optionally upgraded

� with surface cleaning unit

More accessories and

modifications available

on request!

Clino CR1

Clino CR2 – can be disassembled

Clino CR3 – with Surface Cleaning Unit

Surface Cleaning Unit

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4


59

09

CL

EA

NIN

GT

OO

LS

09Mop Frame and Mop

CLEANING TOOLS

Mop Frame – one-piece

Alpha Mop

Beta Mop

Mop King CR

Features:� Available in various materials

� Washable and reusable

� Autoclavable

� Microfibre (Dimension: 41.5 x 11.5 cm)

� Pocketmaterial: polyester, white

� Shrinking after first washing approx. 2%

Alpha Mop

Features:� 100% polyester material with elastic band


� Dimensions: approx. 40 x 20 cm

Beta Mop II

Features:� Fringed mop of 100% polyester material


� Autoclavable

� Suitable for traditional wringer-bucket

� systems

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4


Mop Frame

Features:� Handle with “frame-locking mechanism”

� Fits flat squeezing system of single-bucket

� and double-bucket systems

� Different materials available:

� - stainless steel completely autoclavable

� - holders made from stainless steel,

� - handles made from anodised aluminium

Alpha Mop Frame

Features:� Handle without "frame-locking

� mechanism"

� Handle of light fiberglass

� Flat plastic mop holder with foam pad

The Alpha Mop head must be moistened before being applied!Suitable for cleaning ceilings and walls because of the low weight.

Beta Mop II Frame

Features:� Handle without "frame-locking

� mechanism"

� Handle of white, polyester-coated steel

� Clamp with grip mechanism to secure

� the mop

Traditional bucket with squeezer unit required:Suitable for floor and corner cleaning in areas which are difficult to reach.

60

09

CL

EA

NIN

GT

OO

LS

09 Cleaning Equipment – Plastic

CLEANING TOOLS

Alternative models with flat

squeezer available on request!

DUO Double Bucket on Rollers (DFS18)

Rasan Tec Holder (RTH4H)

Rasant Holder (KRH4N)

Aluminium Handle (AS25)

DUO Double Bucket on Rollers (DFS18)

Features:� Material: high-quality, sturdy plastic (polypropylene)

� 18 l bucket in blue, red, with litre scale

� Steering rollers, 50 mm diameter

� Weight: appr. 8.1 kg

� Plastic squeezer available in blue or red

Rasan Tec Holder (RTH4H)

Features:� Fits DUO double bucket DFS18

� Material: high-quality, sturdy plastic

� Width: 40 cm

� With magnetic lock

� Autoclavable (20 min. at appr. 120°C)

Rasant Holder (KRH4N)

Features:� Fits Microclin + Combitex mops

� Material: high-quality, sturdy plastic

� Width: 40 cm

� With magnetic lock

� Autoclavable (20 min. at appr. 120°C)

Aluminium Handle (AS25)

Features:� For all standard holders and equipment

� Length: 140 cm

Also available as

telescope handle!

61

09

CL

EA

NIN

GT

OO

LS

09Mop Covers

CLEANING TOOLS

Back

Rasant Combitex Mop (RCT4P)

MopEltra Disinfecting Mop Cleaning Agent

Rasant Microclin Mop (RMC40)

Features:� Fits Rasant mop holder (KRH4N)

� Material: microfibre velour (full surface)

� Width: 40 cm

� Dry weight: appr. 47 g

Rasant Combitex Mop (RCT4P)

Features:� Fits Rasant mop holder (KRH4N)

� Material: layered loops inside, microfibre strips outside

� With blizzard bag

� Width: 40 cm

� Dry weight: appr. 123 g

MopEltra Disinfecting Mop Cleaning Agent

Features:� For the disinfection washing of mops and wipers

� Especially developped for textiles containing tensides and/or disinfectants

� Chemothermal disinfection as to RKI at 60°C/15 min

� Mop is protected against graying, incrustation and damage of fibres

� Extremely low foaming

� Especially for mop covers soaked with disinfectant

MopEltra is not suitable for any other kind of laundry!

Mop also available

in 50 cm width!

Rasant Microclin Mop (RMC40) Front

62

Disinfectants – Surface (sterile)

DETERGENTS l DISINFECTANTS10ClearKlens – Sterile solutions for every application

In high risk sterile processing facilities, correct hygiene procedures are essential in order to eliminate the possibility of contamination in the

final product. The ClearKlens sterile range was developed to meet the exacting requirements of the pharmaceutical industry. The concise and

highly effective product range simplify your disinfecting processes. They are manufactured in strict compliance with GMP standards.

To help you adhere to regulatory authority standards, all ClearKlens products feature the following characteristics:

� Standard European formulations, aiding standardised international operating procedures

� Manufactured to GMP standards with full batch traceability.

� ClearKlens disinfectants are tested against relevant CEN standards and comply with the Biocidal Products Directive (BPD).

� Supported by full technical documentation including: certificates of analysis, irradiation and sterility.

� Protected formulations, minimising the frequency of validation*.

Cleanroom packaging specifications

All products of the ClearKlens sterile range are packaged according to the highest of standards to protect the integrity of the product and to

ensure your manufacturing conditions are not compromised. Sterile products are 0.2 micron filtered, gamma irradiated or aseptically filled

and double or triple bagged.

Anti-suck technology

The ClearKlens spray bottle incorporates anti-suck technology, creating a closed system to avoid the potential contamination of the product

by air sucked back into the bottle.

*except under force majeure or exceptional circumstance. TEGO® is a registered trademark of Goldschmidt AG, Germany.

10

DETERGENTS

63

10DETERGENTS l DISINFECTANTSDisinfectants – Surface (sterile)

ClearKlens DE and IPAClearKlens DE and IPA

� Broad spectrum disinfectant

� Passes CEN 1276, CEN 1650 and CEN 13697

� 0.2μm filtered, gamma irradiated

� Supplied with certificates of analysis, sterility and

�irradiation where applicable

� ClearKlens DE: 70% ethanol, 30% water (WFI) and

� 10 ppm Bitrex

� ClearKlens IPA: 70% isopropyl alcohol, 30% water (WFI)

- Also available as an aerosol with purified water

ClearKlens Bi-Spore

� Two-part chlorine dioxide generating system.

� Passes CEN 1276, CEN 1650, CEN 13697 and CEN 13704

� 0.2μm filtered, aseptically filled and double bagged

� Supplied with certificates of analysis and sterility

� Based on chlorine dioxide

� Less corrosive compared to other sporicides

� Compatible in rotation with ClearKlens Tego 2000®

� and/or ClearKlens Cleansinald

ClearKlens Tego2000®

� Highly effective surface active disinfectant

� Passes CEN 1276, CEN 1650 and CEN 13697

� Sterile Spray/Ready-to-Use Solution: 0.2μm filtered,

� aseptically filled and double bagged

� Sterile Concentrate: 0.2μm filtered, gamma irradiated

� and triple bagged

� Supplied with certificates of analysis, sterility and

� irradiation where applicable

� Validated HPLC and Titration test methods available

� Compatible in rotation with ClearKlens Bi-Spore and/or

� ClearKlens Cleansinald

ClearKlens Cleansinald

� Highly effective surface active disinfectant based on a

� blend of quaternary ammonium and alkylamines

� 0.2μm filtered, aseptically filled and double bagged

� Supplied with certificates of analysis and sterility

� Highly compatible with materials commonly found in

� pharmaceutical cleanrooms

� For a broad range of applications

� Compatible in rotation with ClearKlens Bi-Spore and/or

� ClearKlens Tego 2000®

Packaging unit:6 x 900 ml spray bottle

4 x 5 litre canister

12 x 300 ml aerosol

(ClearKlens IPA)

Packaging unit:25 x (2 x 100 ml) concentrate

4 x 4.9 litre canister + 1 x

100 ml activator

Packaging unit:50 x 50 ml concentrate

6 x 900 ml spray bottle

4 x 5 litre canister ready-to-use

Packaging unit:50 x 25 ml concentrate

6 x 900 ml spray bottle

4 x 5 litre canister

ClearKlens Bi-Spore

ClearKlens Tego 2000®

ClearKlens Cleansinald

Effective against spores

within only 5-8minutes!

New!

New!

New!

New!

10DETERGENTS

64

10 –non-sterile

DETERGENTS l DISINFECTANTS

Universal alcohol base

detergents for no-streak

cleaning

Concentrated mildly alkaline

universal surface detergents

Alkaline universal basic

surface detergents with

high emulsifying properties

Broad spectrum non-sporo-

cidal disinfectants for final

disinfecting

Disinfecting detergents

based on quaternary

ammonium bonds

Neutral all-purpose deter-

gents with high emulsifying

properties

Sanitary universal detergents

with good calcium-dissolving

properties

Ready-to-use spray disinfec-

tants for intermediate and

final disinfection

Detergents/Disinfectants – non-sterile

In addition to the “ClearKlens Sterile” products, which were developed for the exacting requirements of sterile production facilities, we offer a

broad range of surface detergents, non-sterile disinfectants and cleaning and care products for the skin and hands.

Since the non-sterile products offered vary from country to country, this page provides an overview of the available product groups. Our sales

team will be glad to provide you with information on availability of products in your region and their suitability for your specific application.

Detergents – Surface

Disinfectants – Surface

New!

10

DETERGENTS

65

10DETERGENTS l DISINFECTANTS– non-sterile

Skin and hands

Liquid soaps

Mild, synthetic soap lotions,

suitable for frequent washing

of hands.

Available without dyes and

fragrances or mildly scented.

Skin care creams

Silicon-free oil/water emulsions,

based on waxes that prevent

dry and irritated skin.

Dermatologically tested.

Disinfectants

Effective disinfection and

prevention of skin irritations.

Available with ethanol base

and 2-propanol and 1-propanol

base.

Dispensers

Various dispensing systems are

available for creams, liquid

soaps, hand disinfection and

admixing and dosing of

cleaning and disinfection

products.

We will be gladto assist you

in choosing suitable products

for your cleanroom staff!

10DETERGENTS

66

11 VACUUM CLEANERS

11

VA

CU

UM

CL

EA

NE

RS

Industrial cleanroom vacuums are for supplementing and supporting the central “internal

vacuum system”.

The product range includes high-performance vacuums and accessories for various require-

ments and applications. Whether wet, moist or dry contaminants, even chemically critical

or explosive substances – we offer a suitable solution.

Our product range offers:� Mini-Vacuums (hand devices /carrying devices)

� Dry Vacuums

� Wet / Dry Vacuums

Devices for EX areas and vacuums for permanent operation are available upon request.

The suction capacity

Optimal suction power of cleanroom vacuums is achieved through perfect interplay of

motor, air flow through the devices and the position of the efficient, vertical filter bag.

The suction power is regulated in two speed levels.

Suction capacity of over 40 liters per second confirms the perfect interplay of motor and

fan at a low noise level.

FiltrationThe most important parameter of the cleanroom vacuums is the collection of ultra fine

particles or residues generated from the recovered materials, contaminants or /and from

the motor.

This is carried out with the help of:

ULPA filter � Efficiency: 99,999%

(Ultra Low Penetration Air) on particles as small as 0.12 micron

HEPA filter � Efficiency: 99,999%

(High Efficiency Particulate Air) on particles as small as 0.3 micron

Basically we use the high performance ULPA filter for the cleanroom models.

Due to the speed level, the ULPA filter becomes at the highest suction level a HEPA filter.

The filtration (4- or 5-stage) and the filter position are model dependant.

The vacuum cleaners are suitable for cleanroom class ISO 4.

MV-1 CR (HH)

EMI-CWR

CWR-10

67

11VACUUM

CLEANERS

Hand / Carrying Devices

VACUUM CLEANERS 11General Features:� Material: stainless steel

� Light weight

� Easy emptying

� Low noise level

� Ground continuity tester

� Hand hold version, optionally available with shoulder strap (BP version)

� Easy storage underneath work benches due to the small size

� Each unit is delivered with instruction manual and guarantee card

Further versions, especially for filtering bacterial contaminants, are available on request.

MV-1 CR (HH) Hand hold

Technical Data:Dimensions (W x H): 19 x 46 cm

Weight: 5 kg

Airflow: 55 l /s

Max. Power (W): 920 W

Filter bag capacity /Recovery tank capacity: 1,9 l

Detachable power cord: appr.. 10 m

� Paper filter (1 micron efficiency) – keeps the other filters free from clogging dust or

contamination

�Clothfilter (1 micron efficiency) washable, synthetic filter prolongs the life of theUlpa filter

� “Kuppel” filter Protects the motor in the event that filters 1 and 2 are used incorrectly

�ULPA filter (Minimum efficiency of 99.999% on particles as small as 0.12 micron)

Purifies exhaust air and ensures cleanroom compatibility for class 10

2

7

8

9

MV-1 CR (HH)filtration

A Suction tube extensionB EMI suppression deviceC Air outlet

4-stage filtration

MV-1 CR (BP) Back pack (with shoulder strap)


Weight: 6,5 kg

Airflow: 55 l /s


Filter bag capacity /Recovery tank capacity: 5,7 l

Detachable power cord: appr. 10 m

1

6

4

5

3

Accessories (inclusive)

MV-1 CR (HH) accessories1) Static dissipating suction hose

(Ø 32 mm x 1.5 m)

2) Micro tool kit, static dissipating

3) Round brush, static dissipating

4) Round tool, static dissipating

5) Flat tool, static dissipating

6) Crevice tool, static dissipating

7) Ground continuity tester

8) Paper filter bags

9) Detachable power cord

Additional accessories are available!

MV-1 CR

MV-1 CR (HH) accessories

68

11

VA

CU

UM

CL

EA

NE

RS

11 Dry Vacuums

VACUUM CLEANERS

Accessories / EMI CWR + EMI-CWR-SS1) Latex paper filter bag

2) Static Dissipating Suction

hose – (Ø 32 mm x 3 m)

3) Static Dissipating Wands (2),

stainless steel


5) Flat tool, ESD safe

6) Crevice tool, ESD safe

General Features:� Various materials available

� Easy to maneuver through large abrasive

� resistant wheels

� Easy emptying

� Low noise level


� Each unit is delivered with instruction

� manual and guarantee card

General Data:Max. power: 1000 W

Airflow: 46 l /s

Filterbag capacity: 9.5 l

Recovery tank capacity: 15 l

Detachable power cord: appr. 10 m

� Paper filter (1 micron efficiency) – keeps the other filters free from clogging dust or

contamination

�Washable synthetic filter (Dralon filter)

�Washable Polyester filter

�ULPA filter (Minimum efficiency of 99.999 % on particles as small as 0.12 micron).

Purifies exhaust air and ensures cleanroom compatibility for class 10

�Optional: HEPA filter in front of the motor (filter capacity: 99.999 % for particle size

> 0.3 μm) Protects the motor from harmful fumes and dusts

CR-4D Polyethylene tank

Technical Data:Dimensions (W x H): 43 x 68,5 cm

Weight: 13,6 kg

EMI-CWR Chrome-plated (conductive)


Weight: 16 kg

EMI-CWR (SS) Stainless steel (conductive)


Weight: 16 kg

Accessories / CR-4D1) Suction hose (Ø 32 mm x 3 m),

static dissipating, ESD safe

2) Extension wands of stainless

steel (2)

3) Crevice tool

4) Flat tool

5) Round brush

6) Combi floor tool

7) Latex paper filter bags

Optional accessories:

8) Utility tool, PVC with rubber

blades

9) Round tool

10) Micro tool kit

(6) mini attachments

11) Micro pad (100 % polyester),

for use with combi floor tool.

Optional accessories:

7) Utility floor and wall tool, ESD safe

8) Round tool, ESD safe

9) Round brush, ESD safe

10) Combi floor tool

11) Micro tool kit

(6) mini attachments

12) Micro pad (100 % polyester),

for use with combi floor tool.

1

2

3

45

6 8

7

9

10

11

12

3

4

56

8

7

9

10

11

12

Autoclavable

accessories

available

on request!

4-stage filtration (optional 5 stages)

Accessories (inclusive)

CR-4D

Accessories / CR-4D Accessories / EMI CWR + EMI-CWR-SS

ElectronicSuppressor

69

11

VA

CU

UM

CL

EA

NE

RS

11Wet / Dry Vacuums

VACUUM CLEANERS

CWR-8Stainless steel or polyethylene tank


Weight: 11 kg

Max. Power (Watt): 1000 W

Airflow: 48 l /s

Filter bag capacity: 9,5 l


Detachable power cord: approx. 10 m

CWR-15Stainless steel or polyethylene tank


Weight: 14,5 kg


Airflow: 48 l /s

Filter bag capacity: 19 l



CWR-10Stainless steel


Weight: 14 kg


Airflow: 48 l /s

Filter bag capacity: 19 l



General Features:� Recovery tank of stainless steel or polyethylene

� Designed for applications where liquids and

� other contaminants are to be recovered

� With autoclavable recovery tanks (stainless

� steel) and autoclavable floater system

� (except: power head)

� Dual ULPA filtration

� Chemical resistant wheels (material: Nitrile)

� Easy to maneuver through large wheels

� Easy emptying

� Low noise level


� Each unit is delivered with instruction

� manual and guarantee card

Additional models / versions

available upon request, for

example: wet / dry vacuums

with activated carbon for

neutralizing harmful fumes

and liquids.

CWR-10

CWR-8

CWR-15

70

11

VA

CU

UM

CL

EA

NE

RS

Wet / Dry Vacuums

VACUUM CLEANERS

CWR Accessories- 8, 10, 15 (inclusive)

1) Clear urethane suction hose, Ø 32 mm x 3 m, static dissipating

2) Extension wands (set of 2), stainless steel

3) Combi floor tool

4) Micro pad, for use with combi tool

5) Utility tool, PVC with rubber blades for walls and ceilings


7) Round tool

8) Flat tool

9) Crevice tool

More Accessories (optional)

� Anti-foam liquide (for use in the recovery tank/wet application)

� Latex paper filter bag (for model CWR-8/dry application)

� Latex paper filter bag (for model CWR-10,15/dry application)

1

2

3

4

5

6

8

7

9

Autoclavable stainless steel accessories (optional)

1) Extension wands set of 2 (38 mm x 36 cm)

2) Utility tool stainless steel with nitrile rubber blades

3) Stainless steel crevice tool (38 mm x 25 cm)

4) Clear urethane suction hose, transparent Ø 38 mm x 3 m,

static dissipating

Item 2 and 3 are available in a 32 mm version

1

2

3

4

A Suction intakeB Motor cooling air intakeC Autoclavable floater systemD Stainless steel support cage for cloth filterE Clean air exhaust – for working airF Clean air exhaust – for motor cooling air

11Filtration for CWR-8, 10, 15

Dry Recovery Liquid Recovery

Accessories

� Paper filter bag with micro liner (one micron efficiency) collects

the bulk of recovered materials and keeps other filters free from

clogging dust

�Double cloth filter (consisting of two layers): one micron efficiency

prolongs the life of the ULPA filters. 2. DRALON PRE-FILTER prevents

caking of fine dust

� Polyester main filter

�ULPA filter (Ultra Low Penetration Air) For working air with

99.999% efficiency on 0.12 micron. Collects ultra-fine particles

that have entered the vacuum system through the suction intake

and also filters any contamination generated by the motor fans

to ensure cleanroom compatibility

�ULPA filter for cooling air with 99.999% efficiency on 0.12 microns.

Collects ultra-fine residue generated by the vacuum motor (from

carbon brushes, bearings, etc.) to ensure cleanroom compatibility

Accessories CWR-8, 10, 15 Autoclavable stainless steel accessories

71

Wet / Dry Vacuums

VACUUM CLEANERS 11CWR-10 PharmaVacTank and sieve made from stainless steel (electropolished, autoclavable)

Technical data:Dimension (W x H): 43 x 99 cm

Weight: 35 kg


Airflow: 48 l/s

Sieve basket capacity: 16 l


Details:� Autoclavable sieve basket for the safe recovery of broken glass and ampules

� The large suction inlet (50 mm) prevents blockage

� Autoclavable accessories inclusive

CWR-10 PharmaVac

Autoclavable sieve basket

11

VA

CU

UM

CL

EA

NE

RS

72

Wet / Dry Vacuums

VACUUM CLEANERS111

1 V

AC

UU

M C

LE

AN

ER

S

Hose Materialcode Application CharacteristicsType

PVC � 323301B Standard-hose for: Color: beige,

� 323303 MV-1CR (HH) static dissipating, flexible, light,

CR-4D not autoclavable

EMI CWR+(SS)

Urethane � 323403 Standard-hose for: Color: transparent,

for stainless steel tank CWR-8 static dissipating, flexible, light,

� 323404 CWR-10 abrasion-resistant,

for polyethylene tank CWR-15 not autoclavable

PVC � 323470 Special hose for: Color: transparent,

FDA-conform CWR-8 static dissipating, FDA conform,

CWR-10 smooth hose (interior + exterior),

CWR-15 not autoclavable

EPDM � 323455 Special hose for: Color: grey

autoclavable (W 32 mm x L 3 m) CWR-8 static dissipating, smooth hose

CWR-10 (interior), good chemical resistance,

CWR-15 autoclavable

Silicon � 323525 Special hose for: Color: white,

autoclavable (W 32 mm x L 1.8 m) CWR-8 static dissipating, FDA conform,

� 323526 CWR-10 smooth hose (interior + exterior),

(W 32 mm x L 3.6 m) CWR-15 good chemical resistance,

autoclavable

Overview of Hoses

Silicon PVC Urethane

EPDM

PVCFDA-conform

73

VACUUM CLEANERS 11

11

VA

CU

UM

CL

EA

NE

RS

Further Accessories for Wet and Dry Vacuums

Explosion Proof Vacuums

Power head with dual ULPA filtration Dry connector recovery system: Double cloth filter, connecting piece and paper filter

Autoclavable floater system

Explosion proof vacuum EXP1-10CR Explosion proof vacuum EXP1-25TC Explosion proof vacuum EXP1-55-(TC)RE

Further information


74

STORAGE SYSTEMS12Modular Storage Cabinets

Stainless Steel Dispenser – 3 compartments

Stainless Steel Dispenser – 4 compartments

12

ST

OR

AG

E S

YS

TE

MS

3 cabinets

Dimensions:Width: 600 mm

Depth: 197 mm

Height: 240 mm

3 compartments


Depth: 205 mm

Height: 600 mm

2 cabinets


Depth: 299 mm

Height: 353 mm

2 compartments


Depth: 220 mm

Height: 1000 mm

Further sizes available

upon request!

Modular Storage Cabinet

Features:� Frame of durable polystyrene

� Sandy beige color

� Modules of durable transparent ABS

� (acrylonitrile-butadiene-styrene-copolymer)

� Suitable for dust-free visible storage

� (e.g. for disposable hoods, overshoes etc.)

� Modules are easily removed for ease of access

� Can be stacked or be secured to the wall

� With handles and label holder

� Labels supplied

4 cabinets


Depth: 155 mm

Height: 207 mm

Stainless Steel Dispenser

Features:� With 2, 3 or 4 compartments with round openings for storing

� and easy pull-out of disposables

� Fabrication: 304 stainless steel, electropolished

� For storing and dispensing: gloves, hairnets, facemasks, overshoes

4 compartments


Depth: 205 mm

Height: 600 mm

75

12STORAGE SYSTEMS

Sterilizing stainless steel container

Aluminium bottom

Perforated stainless steel cover

Sterilizing containers are produced to the highest quality require-

ments and are used for sterilizing and contamination-free storage

of sterile items.

Features:� Optionally deep drawn with aluminium bottom or fabricated and

� welded stainless steel container

� The cover and the container bottom are perforated

� Optionally available with only the cover, or only the bottom,

� perforated

� Removable cover

� Equipped with cotton filter: a sliding cover allows fast exchange

� of filter

� A silicon seal fitted in the cover ensures a hermetic seal

� Clamp mechanism

� Optionally available with label holder

� Stackable

Sterilizing Stainless Steel Container

Dimensions:Length: 350 mm

Width: 250 mm

Height: 150 mm

Details:Perforated cover and bottom, fabricated and welded

Sterilizing Container; Aluminium Base


Width: 158 mm

Height: 112 mm

Details:Perforated cover and bottom, deep drawn

cover and base


Width: 460 mm

Height: 180 mm

12

STORAGE

SYSTEM

S

All containers correspond

with medicine product

law and have a CE-label

76

13 Chairs

EQUIPMENT

13

EQ

UIP

ME

NT

Quality, together with health and safety, are also priorities for seating, especially when the immediate environment must be clean and sterile

or when static charging is to be avoided.

Various cleanroom chairs are available for the different applications. Our complete range of cleanroom chairs is excellently suited to clean-

room requirements. Their suitability has been checked and documented by the Fraunhofer Institute for Production Technology.

The high quality of the chairs, including minimal particle emission and reliable elimination

of electrostatic charges, are proved by countless series of tests as well as daily experience.

Technical and Ergonomic Features

� Base-pressure

diecast aluminium

Contact

backrest

� Encapsulated

mechanism

� Cleanroom compatible

materials

� Conductive to prevent

electrostatic charges

Synchron system

to adjust to

posture

� Sealed padding, foam injected

77

Chairs

EQUIPMENT 13Artificial leather

Padding

Padding cover

Backrest cover

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4

1ISO 3


13

EQ

UIP

ME

NT

�Electrostaticdischarging

�... or with sliders

�Base-pressurediecast aluminium,shown with castors ...

�Cleanroom compatible materials,smooth surfaces

�Encapsulatedmechanism

�Sealed padding,foam injected

Technical Features

� Sealed padding, foam injectedThe artificial leather, padding and padding cover are permanently attached

together to minimize particle emissions.

� Enclosed mechanismAll moving parts of the chair are enclosed within seat and backrest.

Particle emission is reliably minimized.

� Cleanroom compatible materialsThe base of the seat and the backrest cover are made from sheet steel. They are abrasion-

proof. The electrically conductive leather upholstery can easily be cleaned and is non-slip

even for smooth cleanroom clothing. The smooth surface impedes the deposition of

particle contaminants on the chair.

� Base-pressure diecast aluminium, optionally on castors or slidersThe aluminium stand is highly polished, abrasion proof and electrically conductive. Instead

of double safety castors the chairs can optionally be fitted with conductive sliders for hard

surfaces.

� Conductive to prevent electrostatic chargesCleanroom chairs are electrically conductive and provide reliable protection from electro-

static charging.

Ergonomic Features

Optionally backrest in permanent contact or synchron system

Permanent contactThe backrest continuously adjusts to the movement of the upper body and creates

a physiologically correct support of the main muscular and spinal parts.

Synchron systemThe synchron system allows a synchronised movement of seat and backrest und supports

the individual seating positions. This enables a relaxed musculature, intervertrebral discs are

effectively released, blood circulation is improved.

Pictures to item and see previous page.

13 Chairs

EQUIPMENT

78

BASIC (low)

BASIC (high) Mounting step andconductive sliders

PLUS (low)

PLUS (high)

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4

1ISO 3


13

EQ

UIP

ME

NT

Model BASIC� Seat support of conductive plastic

� Artificial leather covers

� Aluminium base

� Conductive castors

� Metal parts coated with epoxy resin

Permanent contact (low)

Seat height: 460 - 610 mm

Synchron system (high)


Permanent contact (high)




� Mounting step and conductive sliders

Model PLUS� Seat and back rest casing of sheet

� steel (completely conductive)

� Artificial leather covers

� Aluminium base

� Conductive castors

� Metal parts coated with epoxy resin

Permanent contact (low)



Synchron system (low)











Plastic sliders

Steel sliders

Article code9140-2571





9182-2571

9186-2571

9184-2571


9162-2571

9166-2571

9164-2571

Article code

9183-2571

9185-2571

Measurements:Width of seat: 460 mm

Depth of seat: 440 mm

Height of backrest: 430 mm

















Armrests are available

for all models!

79

13Stools

EQUIPMENT

Ergometric Stool

Revolving Stool

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4


13

EQ

UIP

ME

NT

Article code: 9457R-2571


Details: � Abrasion-resistant plastic sliders

� Epoxy coated



Details:� Soft, double castors



Details:� Abrasion-resistant plastic sliders

� Epoxy coated



Details:� Soft, double castors for use on hard

� floor coverings



Details:� Abrasion-resistant plastic sliders

� Chrome-plated foot ring

Ergometric Stool

Features:� Flexible hight adjustment employing

� gas-filled springs with annular release

� Ergonomically moulded saddle seat

� Upholstered with black, conductive

� artificial leather

� Stable base of pressure die-cast and

� polished aluminium with five feet

� Conductive

� Frame color: light grey

Revolving Stool

Features:� Flexible height adjustment employing

� gas-filled springs with annular release

� Large seat

� Upholstered with black, partially

� conductive artificial leather

� Stable base of pressure die-cast and

� polished aluminium with five feet

� Partially conductive

80

Chairs l Stools

EQUIPMENT13Labster – the new chair for laboratories

The new chair stool collection labster is a bespoke specialist for sitting in laboratories or in

production areas in liefe science industries.

Labster has no sharp edges. A new, seamless design concept with rounded surface geometries

ensures absolutely clean lines. Microorganisms will find no nooks or crannies in which to

hide on Labster. All surfaces can be cleaned quickly and thoroughly. Labster’s new form itself

thus becomes the ideal function for work in a laboratory.

People who operate in laboratories often spend long hours with the upper part of their body

bent forwards, for example when pipetting or working at a microscope. Labster works with

them and offers permanent support at a healthy angle of 90° between the upper part of the

body and thighs. Because thanks to its special “work function” the backrest plus seat unit

flexibly adapts to the corresponding position of the body and permits ergonomic work in

postures that are typical for laboratories. All controls to adjust the seat height, seat tilt or

backrest are naturally integrated without seams into the body of the Labster.

The Labster family of products also includes a laboratory stool and laboratory standing aids

for special fields of use.

Surfaces and colors for backrest and seat Surface: leather substitute Skai

Colors: black, blue, grey, red, mint

Surface: integral foam

Colors: black, grey

Base:The base is designed like an opened umbrella to allow optimum cleaning. Its flat and compact

form means that it is not a stumbling block in the typically cramped working environment of

a laboratory.

Foot ringThe comfortable and large foot ring makes it easier for the user to adopt their sitting position

quickly and safely.

Labster 2 revolving stool with wheels


Labster 3 revolving stool with sliders and foot ring


Labster stoolSeat height: 450 - 650 mm

Labster standing aidsSeat height: 650 - 850 mm

Labster 2 revolving stool with wheels

Labster stool Labster standing aid

Labster revolving stool with footring

Labster footring

13

EQ

UIP

ME

NT

13Tables

EQUIPMENT

81

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4

1ISO 3


13

EQ

UIP

ME

NT

The stainless steel furniture, which is electrically conductive, consists of vertical

supports with solid faces and perforated horizontal tops to reduce disturbance

of the vertically directed laminar flow. Moving and cleaning the furniture is

also facilitated. The holes in the tops have a diameter of 8 - 10 mm and are

chamfered on both sides.

Features:� Material: stainless steel, brushed or electropolished

� Table top solid or perforated

� Optimum routing of airflow

� Optionally 3-sided base or H-base

� Additional strengthening struts surround the tabletop to provide further

� stability

� Standard load bearing capacity: 100 kg /m2

� Available with melamine faced chipboard and/or special design

Dimensions:Working height between 740 mm and 780 mm

Special Fittings� Plastic inlays to keep the arms warm

� Devices for cables, etc.

� Drawers, either perforated or unperforated and lockable

� Writing pad

� Overhead shelving

� Adjustable height

� With castors (steerable, lockable)

� Special versions available to customer requirements

Besides the stainless steel equipment, we

also offer equipment in chrome plated

steel, melamine faced chipboard or plastic

(class > ISO 7)!

82

EQUIPMENT13 Shelving l Cabinets

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4

1ISO 3


13

EQ

UIP

ME

NT

Shelf Ledges

Label Holder

Shelving

Features:� Material: stainless steel or chrome plated

� Simple to assemble

� 4 supporting posts in varying heights optionally available with (lockable) castors or

� foot plates

� Shelves available in different designs (wire frame or solid shelves)

� Shelf connector to “add-on” shelving units

Special Fittings:� Label holders for wire frame shelves

� Shelf dividers

� Shelf ledges in different heights

Dimensions:Up to customer preference

Cabinets

Features:� Material: stainless steel, brushed or electropolished

� Tall cupboards with 2 or 3 sides

� Hinged or sliding doors

� Internal shelves as required, solid or perforated

� Optionally with hanging rail and clothes hangers

� Optionally with lockable doors

� Available with melamine formaldehyde resin coating splint disc and with extra equipment

� available


13EQUIPMENT

83

Utility Carts l Garment Racks

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4

1ISO 3


13

EQ

UIP

ME

NT

Utility Carts

Features:� Material: stainless steel or chrome plated

� Easy to maneuver

� Optionally with 2 or 3 wire or solid shelves

� Two one-piece-handles

� 4 castors (steerable or fixed)

� Optionally chromed or made from Polyethylene

Size (W x L x H):455 x 610 x 1000 mm

530 x 760 x 1000 mm

610 x 910 x 1000 mm

Garment Racks


� Optionally with compartments above the hanging rail for caps, masks, etc.

� Compartment sides can be solid or perforated

� Compartment width as required

� Optionally with drawers at the side or below


� Clothes hanger are not included in the delivery

� Available with melamine faced chipboard and/or special design


Further sizes are

available on request!

Utility Carts in various designs

84

EQUIPMENT13 Sitoverbenches l Waste Bins

100 000ISO 8

D

10 000ISO 7

C

1000ISO 6

100ISO 5A/B

10ISO 4


13

EQ

UIP

ME

NT

Sitoverbenches


� Functional barrier to separate different areas

� Cleanroom compatible sitting surfaces, optionally in polyethylene

� or polypropylene

� With or without shoe compartments

� Places are numbered to aid allocation of seats to personnel


� Available with melamine faced chipboard and /or special design


Waste Bins

General Features:� Material: stainless steel

� Optionally hand or pedal operated

� Varying capacities

� With removable inner container

Hand operated

Features:� Hand operated waste bin

� Stainless steel

� Shock-resistant plastic lid

� Self-closing stainless steel

� entry flap

� Hotgalvanised inner container

Pedal operated

Features:� Pedal operated waste bin

� Stainless steel

� Shock-resistant black plastic

� lid

� Plastic inner container with

� handle

Sitoverbench

Waste Bins

13EQUIPMENT

85

Examples for Gowning Room Equipment

13

EQ

UIP

ME

NT

86

In addition to classic cleanrooms, local cleanrooms are also being installed. These achieve

cleanroom conditions in smallest areas and thus represent an economic alternative for

individual production sections.

All laminar flow hoods offered by basan work according to the principle of low-turbulance,

forced air flow. Using this principle an air current is introduced horizontally or vertically

through the working area of the cabinet. In the process the ambient air is introduced via a

pre-filter and flows over a high-performance suspension-substance filter horizontally or vertically into the work area as laminar flow current.

This air current captures the particles directly where they originate and transfers them without return flow away from the clean area via the

exhaust air duct. The decision for either horizontal or vertical flow should be based on the quantity and geometry of the items located in

the work area.

Laminar flow hoods prevent particle contamination when filling or packing products. Laminar flow hoods are installed over existing production

lines. Vertical flow modules can be mounted on mobile stands and thus moved between areas. Lateral conduction of the clean air flow and

shielding of the clean work area is achieved through PVC strip curtains or side panels.

Laminar Flow Units

COMPONENTS14

Horizontal/Vertical Flow Hoods

Features:� Material: melamine resin coated chip board

� Optionally available in stainless steel

� Devices available with or without base frame

� Optionally available as standing devices or ceiling systems

� Automatic air speed control

� Main filter monitoring

� Night economy feature (manual or time switched clock)

� Cooler to eliminate the inherent unit heat

� UV light units

� Outlets

� Gas connection

� Ionizing systems

� Ensuring product protection

� Vertical flow hoods are optionally available with re-circulated

� air principle for protection of the operators and products

Base Frame� Material: coated steel

� Optionally made of stainless steel

� Side panels and optionally front panels of Plexiglas

� Tabletops optionally perforated

� Mobile on castors (upon request)

14

CO

MP

ON

EN

TS

The manufacture of these

products is done on a

customer-specific basis!

Air Flow Diagram: Vertical Flow Hood

Air Flow Diagram: Horizontal Flow Hood

87

Horizontal / Vertical Flow Hoods

COMPONENTS 14

14

CO

MP

ON

EN

TS

Other dimensions are available on request

Horizontal Flow Hood

Types Casing Dimensions mm Interior Work Area mm Lighting Blowers Air Flow Weight

W H1 H2 w d h Watt Watt m3/ h approx. kg

H 06.09 975 1285 1995 875 610 570 2 x 18 880 900 110

H 06.12 1280 1285 1995 1180 610 570 2 x 30 880 1200 155

H 06.15 1585 1285 1995 1485 610 570 2 x 36 880 1500 200

H 06.18 1890 1285 1995 1790 610 570 2 x 58 1550 1800 250

H 07.09 975 1435 2145 875 610 720 2 x 18 880 1130 150

H 07.12 1280 1435 2145 1180 610 720 2 x 30 880 1500 195

H 07.15 1585 1435 2145 1485 610 720 2 x 36 1550 1880 240

H 07.18 1890 1435 2145 1790 610 720 2 x 58 1550 2260 290

H 09.12 1280 1585 2295 1180 610 870 2 x 30 1550 1800 235

H 09.15 1585 1585 2295 1485 610 870 2 x 36 1550 2260 280

H 09.18 1890 1585 2295 1790 610 870 2 x 58 1550 2710 330

Vertical Flow Hood

Types Casing Dimensions mm Interior Work Area mm Lighting Blowers Air Flow Weight

W H1 H2 w d h Watt Watt m3/ h approx. kg

VM 06.07 823 695 900 743 635 665 2 x 18 880 750 83

VM 06.09 975 695 900 895 635 665 2 x 18 880 900 96

VM 06.12 1280 695 900 1200 635 665 2 x 30 880 120 130

VM 06.15 1585 695 900 1505 635 665 2 x 36 880 1500 160

VM 06.18 1890 695 900 1810 635 665 2 x 58 880 1800 190

VM 07.09 975 850 900 895 790 665 2 x 18 880 1130 123

VM 07.12 1280 850 900 1200 790 665 2 x 30 880 1500 155

VM 07.15 1585 850 900 1505 790 665 2 x 36 880 1880 185

VM 07.18 1890 850 900 1810 790 665 2 x 58 1550 2260 215

VM 09.12 1280 1000 900 1200 940 665 2 x 30 1550 1800 180

VM 09.15 1585 1000 900 1505 940 665 2 x 36 1550 2260 210

VM 09.18 1890 1000 900 1810 940 665 2 x 58 1550 2710 235


COMPONENTSHorizontal / Vertical Flow HoodsVertical Flow Tunnels /Hoods14

88

14

CO

MP

ON

EN

TS Vertical Flow Hood

Types Width Depth Blower Box Filter Cell Voltage Lighting Blowers Air Flow Weight

W D Width: w1 Qty. Dimensions Volt Watt Watt m3 / h approx. kg

MK 12.18 1290 1940 1130 2 915 x 1220 x 71 220 3 x 30 1880 3600 300

MK 12.22 1290 2435 1130 3 762 x 1220 x 71 380 4 x 30 3000 4500 375

MK 15.18 1595 1940 1435 2 915 x 1525 x 71 380 3 x 30 3000 4500 375

MK 15.22 1595 2435 1435 3 762 x 1525 x 71 380 4 x 30 3000 5600 470

MK 18.18 1940 1940 1780 2 915 x 1830 x 71 380 3 x 30 4900 5400 445

MK 18.22 1940 2435 1780 3 762 x 1830 x 71 380 4 x 30 4900 6780 555


Vertical Flow Tunnels/Hoods

Features: � Material: melamine resin coated chip board

� Side shielding: PVC strip curtains or Plexiglas side panels

� Optionally available as free standing unit or ceiling suspended

� Automatic air speed control

� Main filter monitoring

� Night economy feature (manual or time-switched clock)

� Cooler to eliminate the inherent unit heat

� UV light units

� Outlets

� Gas connection

� Ensuring object protection

650

650

D

W

as

selected

w1

H1

H2h

d

w

W

Vertical Flow Hood Horizontal Flow Hood

Vertical Flow Hood

W

d

w

D

COMPONENTS 14

89

Wet Processing Equipment

Model: CT 975

Dimensions:Bench width: 975 mm

Raster quantity (work panels /

troughs): 2

Bench depth: 695 or 850 mm

Door width: 675 mm

Model: CT 1585



troughs): 4


Door width: 1085 mm

Model: CT 1280



troughs): 3


Door width: 780 mm

Model: CT 1890



troughs): 5


Door width: 1390 mm

Wet Bench

14

CO

MP

ON

EN

TS

Wet processing equipment is installed primarily for work with liquid materials that give off harmful and toxic fumes. Collection troughs and

rinsing tanks facilitate work with the liquid medium; fumes are concurrently and safely extracted from the chemical bench area via a suction

system.

Features:� Self-supporting design of solidly welded 20 mm polypropylene panels

� Work panels optionally of stainless steel or natural polypropylene

� Surface extraction suction via the perforated work panel

� Collection troughs with air ducts, solidly welded into the casing

� Collection trough floor with 2% gradient laterally towards the rear

� Collection trough with coarse sieve

� Acid bath, rinsers, rinsing bathes, etc. can be optionally integrated

� Lower area is fitted with folding doors. The lower area can be extraction suctioned similar to the perforated working panel

� Optionally the base can stand on height-adjustable stainless steel feet

� Basic supply connections are on the rear side of the bench

� Operating and display elements are easily visible on the front side at the table height

� The transparent cover ensures protection against sprayed water

90

COMPONENTS14 Desiccators

When storing highly sensitive components that have a tendency to corrode in a normal atmosphere or that must also be protected from

particles, nitrogen-ventilated storage systems should be used. The storage takes place in a low-oxygen atmosphere. Usually nitrogen is

flushed permanently into the chambers which thins and replaces the oxygen atmosphere.

For storing components and material that may be exposed to a normal atmosphere, but which must also be stored dust-free and thus

protected from contamination, we recommend the use of desiccators without nitrogen flooding.

When storing DC sensitive components, the individual chambers or the entire storage shelf system are manufactured of conductive acrylic

glass with conductance resistance of 107 W/cm. Optionally volume-conducting plastic inserts of synthetic rubber are available to eliminate

potential differences.

The major advantage of acrylic glass is the all-round transparency which enables specific access to the stored parts. Acrylic glass is particle

free and also resistant to many cleaning agents.

Depth Y:

450 mm

600 mm

Height Z:

300 mm

400 mm

Features:� Transparent boxes of acrylic glass

� A yellow tinted (AMBER) version is available for parts that are sensitive

� to white light

� Optimal seal of the boxes through magnetic locks and all-round gaskets

� on the individual doors

� Ergonomic bracket handles for opening the doors

� Doors are monitored with contact circuits to introduce a higher gas quantity

� when opening the doors

� Control columns with automatic nitrogen flushing for connection to a central

� nitrogen supply system

� Optionally available without nitrogen connection

� Control columns with display of sintered sheet metal with adjustable feet

� Adjustable total gas quantity for all compartments when doors are closed

� Various numbers of columns with a varying number of boxes

� Dimensions of the base frame can be varied

� Optionally with lockable doors

� Optionally available in a conductive version

� Modular

Details:Columns with a different number of boxes can be combined

Dimensions of the single boxes:Width X:

350 mm

400 mm

450 mm

500 mm

14

CO

MP

ON

EN

TS

Cable Duct

Insufflation Bar

Desiccator

Acrylic Box

91

PACKAGING 15Tyvek® Packaging

Easy-tear-Bag

Foil and Flat Paper Bags

15

PA

CK

AG

ING

Tyvek® Packaging

Features:� Composite of polyethylene foil and uncoated Tyvek®

� Transparent foil offers the advantage of product

� visibility

� Steam-sterilizable up to 125°C

� Ethylene oxide- and gamma sterilizable

� Very low gas residue (for instance ETO) gas

� sterilization shortens the airing out time

� Sterilization indicators on the packaging

� Extremely low particle contamination

� Low fluff

� Outstanding barrier characteristics

� High-quality sealing and burst strength

� Easily heat-sealed (sealing temperature up to max.

� 120°C)

� Foils are suitable for printing

� 100% recyclable

� Optionally available as flat bag, tube or easy-tear-bag,

� to minimize particle contamination

� Certificate of conformity with each delivery

Transparent Paper Packaging

Features:� Material: sterilization kraft paper with composite foil

� of polyester /polypropylene

� Transparent foil offers the advantage of product

� visibility

� Unlimited suitability for steam-, ethylene-oxide- and

� formaldehyde-sterilization


� Simple, safe sealing with pass-through sealing devices

� Optionally available with self-adhesive closure

� Removal help facilitates opening of the packaging

� Foils are suitable for printing with sterilizable fiber-

� tipped pens

� Optionally available as flat paper bag or tube

The most important task of packaging is to protect the product from external contamination.

All packaging types are available for various cleanroom classes.

Flat BagDimensions:Various widths

Various lengths

Standard thickness: 0.100 mm

Details:Available with or without side

pleat

TubeDimensions:Various widths

Lengths 100 m

Details:The ideal packaging for oversized

sterilized goods


Various lengths


Various lengths


sterilized goods

We are pleased to offer you

sealing devices upon request!

92

PACKAGING

PE Packaging

Antistatic PE Packaging

151

5 P

AC

KA

GIN

G

Polyethylene Packaging

Features:� Ultra-clean, clear polyethylene

� Transparent foil offers the advantage of

� product visibility

� Suitable for gamma sterilization


� No gas emissions

� Resistant to most chemicals

� Easily heat-sealed (sealing temperature

� 120°C to 200°C)

� Optionally available as flat bag or tube


Antistatic Polyethylene Packaging

Features:� Ultra-clean polyethylene in pink

� Non-corrosive

� Resistant to most chemicals

� Optionally available as flat bag or tube

� Easily heat-sealed (sealing temperature

� 120°C to 200°C)



Various lengths



Various lengths


Details:Tube with plastic core, the ideal

packaging for oversized sterilized

goods


Various lengths


Details:Optionally available with self-ad-

hesive seal


Various lengths



sterilized goods, tube with plastic

core

Packages and bags for

machines and devices of

all sizes are available!

Ionization

Ionizing neutralizes electrostatic charges, which occur through the friction or separation of

two materials. In the process an exchange of electrons takes place, this means that in one

material electron surplus prevails (negative charge) in the other material there is a lack of

electrons (positive charge).

For human beings electrostatic charges as well as discharges are generally harmless. However,

in the course of production, disturbances can happen when contaminating particles are

attracted by electrostatically charged surfaces.

Various devices are used appropriate according to the area or product being ionized:

� Overhead Ionizers

� Benchtop Ionizers

� Ionizing Air Guns

93

16–+

IONIZATION

––

+–

+–

+

Elektrostatic discharge

Top Gun

Detailed informations to

the single equipments

are available on request!

Aerostat XCGuardian CR 2000 (3 fans)

16

IO

NIZ

AT

ION

94

MISCELLANEOUS17Sole Cleaning Machine

Features:� For sole cleaning (1 place)

� Incl. canholder (23 l)

� Cleaning of sole through rotating brush role

� Housing prevents splashing of water

� Optimized hygiene through chamfered borders

� Easy cleaning

Dimensions:Type 23850

Width: 470 mm

Depth: 670 mm

Height: 1130 mm

Type 23820

Width: 706 mm

Depth: 515 mm

Height: 1125 mm

Sole Cleaning Machine Type 23850

Sole Cleaning Machine Type 23820

Detailed information


17

MIS

CE

LL

AN

EO

US

95

A - E

ALPHABETICAL INDEX

Accessories (Vacuum Cleaners) 73

Adhesive Labels 51

Adhesive Tapes 51

Aerostat PC (Benchtop Ionizer) 93

Aerostat XC (Benchtop Ionizer) 93

Alpha Mop 59

Aluminium handle 60

Antistatic Packaging 92

Aprons (Disposable) 28

Astro Hood 25

Astrospec, Safety Glasses 21

AS-TY-02, Sleeves (Disposable) 28

Autoclavable Safety Glasses 21

Back Pack, Vacuum Cleaners 67

Beard Covers (Disposable) 28

Benchtop Ionizers 93

Beta Mop II 59

“BioClean DB“, Sterile Facemask 26

Boots 38

Bucket on Rollers 58, 60

CAL-8, Apron (Disposable) 28

Carrying Devices (Stainless Steel) 67

Chairs 76

Chemical Resistance of the Various Swab Materials 49

Chemical Resistant Apron, CAL-8 (Disposable) 28

Chemical Resistant Protective Gloves 34

Classic Plus, Tyvek® Coverall 23

Clean Zone (Flooring) 55

ClearKlens 62

ClearKlens Bi-Spore (Disinfectant Surface, sterile) 63

ClearKlens Cleansinald (Disinfectant Surface, sterile) 63

ClearKlens DE and IPA (Disinfectant Surface, sterile) 63

ClearKlens Tego 2000® (Disinfectant Surface, sterile) 63

Cleaning Agent Mop (disinfecting) 61

Cleaning Equipment 58 ff

Cleaning Products (Mats and Flooring) 56

Cleaning Tools 57

Cleaning Wipers 40 ff

Cleanroom Paper 50

Cleanroom Personnel, Training 8

Clino CR 1, 2, 3 (Single- and double-bucket Systems) 58

Clipboards 51

Clogs 36

Coats (Disposable) 24

Coats (Reusable) 17

Components 86

Computer-Paper 50

Conductive Overshoes, Nonwoven 27

Cotton Wipers 43

Coveralls (Disposable) 23

Coveralls (Reusable) 15

CPE/PP, Overshoes (Disposable) 27

CR-4D (Dry Vacuum Cleaner) 68

Creation of Cleaning Plans 6

CWR-10 Pharma Vac (Wet /Dry Vacuum Cleaner) 71

CWR-8, 10, 15 (Wet /Dry Vacuum Cleaner) 69

Decontamination 10

Desiccators 90

Detergents Surface (non-sterile) 64

Detergents Skin and Hands (non-sterile) 65

DIN-Standards (for safety, protection and industry Shoes) 35

Disinfectants Surface (sterile) 62, 63

Disinfectants Surface (non-sterile) 64

Disinfectants Skin and Hands (non-sterile) 65

Dispensers 65

Dispenser (Wipers) 43

Disposable Cleanroom Gloves (Cleanroom packed, in polybags) 30 ff

Disposable Garments, Materials 22

Double-bucket Systems (Cleaning Tools) 58

Dry Vacuum Cleaners 68

Dry Wipers 41 ff

DUO Double Bucket on Rollers (DFS18) (Cleaning Tools) 60

Dyclean, Cleaning Product (Mats and Flooring) 56

Dygiene, Cleaning Product (Mats and Flooring) 56

Electrostatic Charge/Discharge 93

EMI-CWR (Dry Vacuum Cleaner) 68

Equipment 74 ff

ESD-Shoes 36 ff

Definition Page Definition Page

96

E - N

ALPHABETICAL INDEX

Examples for Gowning Room Equipment 85

Explosion Proof Vacuum Cleaner 73

Fabrics (for Reusable Garments) 14

Facemask (Disposable) 26

Facemask (Reusable) 15

Facemask BN (Disposable) 26

Facemask Type 1 (Disposable) 26

Facemask, broad Version (Disposable) 26

Facemask, sterile, “BioClean DB“ (Disposable) 26

Filtration (Vacuum Cleaners) 66

Fingercots 32

Fit, Polyamide-Glove (knitted, textile) 33

Flat Bag 91

Flooring 52 ff

Foam Swabs 47

Foam Wipers 43

FULL SERVICE CONCEPT 11

Garment Racks 83

Garment System (Reusable) 13

Garments (Reusable) 14 ff

Glove Liners 33

Glove Liners, Half-finger Version 33

Gloves 29 ff

Gloves, sterile 31

Gowning Room Concepts 9

Guardian CR2000 (Overhead Ionizer) 93

Hand/Carrying Devices (Stainless Steel Vacuum Cleaners) 67

HB-TY-01, Open Face Hood, Tyvek® (Disposable) 25

Headwear “Bouffant Style“ (Reusable) 17

Heat Resistant Protective Gloves 34

HEPA-Filter (Vacuum Cleaner) 66 ff

Hoods (Disposable) 25

Hoods (Reusable) 15

Horizontal Flow Hoods 87

Integrity (Fabric of Reusable Garment) 14

Interlock, Under Garments 18, 20

Ionization Tools 93

Ionizing Air Guns (Ionization) 93

IPA (Pre-wetted Wipers) 45

Jersey, Under Garments 18

King CR Mop 59

Knitted Gloves 33

Knitted Poylester (Swabs) 46

Labmat, Permanent Mat 54

Labster, Cleanroom Chair 80

Laced Shoes 37

Laminar-Flow-Systems 86

Latex Gloves, sterile 30

Latex Fingercots 32

Latex Gloves 30

Leasing-Systems (Reusable Garments) 10

Liquid soaps 65

Logistics Services 9

Lorica, Special Shoe 39

Microfibre Under Garments 18 ff

Microfibre Wipers 42

Modular Storage Cabinet 74

Mop Covers 61

Mop Frame Rasan Tec (RTH4H) 60

Mop Frame Rasant (KRH4N) 60

Mop Frames 60

Mop Rasant Combitex (RCT4P) 61

Mop Rasant Microclin (RMC40) 61

MopEltra, Desinfecting Cleaning Agent 61

MV-1 CR (Hand Vacuum Cleaners) 67

Neutralization of Static Charges 93

Nitrile Fingercots 32

Nitrile Gloves 30

Nitrile Gloves, sterile 30

Non-Slip, Permanent Mat 54

Nonwoven Beard Covers 28

Nonwoven Disposable Garments 22

Nonwoven Hoods 25


97

N - S

ALPHABETICAL INDEX

Nonwoven Sleeves 28

Nonwoven Swabs 47

Nonwoven Wipers 41

Nonwoven Wipers, sterile, dry 44

Nonwoven Wipers, sterile, pre-wetted 45

Notebooks 50

Notebooks with spiral binding 50

Nylon Swabs (Polyamide) 46

Nylon Wipers (Polyamide) 41

On Roll Mat, Permanent 54

Open Face Hood, Tyvek® (Disposable) 25

Open Face Hoods 15

OSD, Overshoes 27

Overboots (Disposable) 27

Overboots (Reusable) 16

Overhead Ionizers (Ionization) 93

Overshoes (Disposable) 27

Overshoes (Reusable) 16

Packaging, antistatic 92

Packaging, Polyethylene 92

Packaging, Transparent Paper 91

Packaging, Tyvek® 91

PalmFit, Polyamide Gloves (Coated Palm) 33

Pantolettes 36

Particle-collecting Mats 52

PE Gloves (Disposable) 31

Peel-off Mats 52

Performance measurement of cleanroom flooring 55

Permanent Mats 53

Pharma Vac (Wet /Dry Vacuum Cleaner) 71

PO 05, 13, 15, Hoods (Disposable) 25

Polyester Wipers, pre-wetted 45

Polyester Wipers, sterile 44

Polyester-Cellulose-Wipers (Nonwovwen) 41

Polyester-Swabs (Knitted Polyester) 46

Polyester-Wipers 41

Polyethylene Overshoes (Disposable) 27

Polyethylene Packaging 92

Polyethylene, Disposable Garments 22

Polypropylene Coats (Disposable) 24

Polypropylene Wipers, sterile, pre-wetted 45

Polypropylene, Disposable Garments 22

Polypropylene/Polyethylene-Overshoes (Disposable) 27

Polypropylene-Coveralls (Disposable) 23

Polypropylene-Wipers 42

Polyurethane Wipers (Foam) 43

Polyvinylalcohol-Wipers (Foam) 43

Pre-wetted Wipers 45

Protectamat (Permanent Mat) 53

Protective Gloves 34

PU Nonwoven Glove 31

PU-Clogs 39

Reusable Coats 17

Reusable Coveralls 15

Reusable Facemasks 15

Reusable Headwear “Bouffant Style“ 17

Reusable Open Face Hoods 15

Reusable Overboots 16

Reusable Overshoes 16

Ring Binders 51

Safety Glasses 21

Safety Shoes 38

Sandals (ESD) 36

Services, various 6 ff

Shelving 82

Shoes for Wet Areas 39

Shoes, antistatic or ESD 36 ff

Single-bucket System (Cleaning Tools) 58

Sitoverbenches 84

Sizes (Reusable Garments) 14

Skin care creams 65

Sleeves (Disposable) 28

Slipper (ESD) 37

Socks (Reusable) 20

Sole Cleaning Machine 94

Special Shoe Lorica 39

Spiral Binding Notebooks 50

Stainless Steel Dispenser 74


98

S - W

ALPHABETICAL INDEX

Stainless Steel, Carrying Devices 67

Stainless Steel, Hand Devices (Vacuum Cleaner) 67

Stainless Steel, Sterilizing Containers 75

Sterile Wipers, dry 44

Sterile Wipers, pre-wetted 45

Swabs 46

Synthetic Gloves, sterile 31

SZ-TY-00, Apron (Disposable) 28

Tables 81

Texclean 6 (Fabric, Reusable Garment) 14

Textile Gloves 33

TOC Cleaning Validation Kit 48

Top Gun (Ionizing Air Gun) 93

TopFit, Polyamide Gloves (Coated Fingertips) 33

Training of Cleanroom Personnel 8

Transparent Paper Packaging 91

Trionic, Tripolymere Gloves 34

Trousers (Reusable) 19

T-Shirts (Reusable) 19

Tubes 91

Typ P (Permanent Mat) 54

Tyvek® Apron 28

Tyvek®-Coats (Disposable) 24

Tyvek®-Coveralls (Disposable) 23

Tyvek®-Disposable Garment 22

Tyvek®-Hoods (Disposable) 25

Tyvek®-Overshoes (Disposable) 27

Tyvek®-Packaging 91

Tyvek®-Sleeves (Disposable) 28

UF-PE-17, Overshoes (Disposable) 27

UF-TY-15, Overshoes (Disposable) 27

UH-PE-55, Overboots (Disposable) 27

UH-TY-50, Overboots (Disposable) 27

ULPA- Filter (Vacuum Cleaners) 66

UM-PE-25, Overshoes (Disposable) 27

UM-TY-21VS, Overshoes (Disposable) 27

Utility Carts 83

Vacuum Cleaners 66 ff

Vacuum Cleaners, Accessories 67, 68, 70, 73

Vacuum Cleaners, Explosion proof 73

Vertical Flow Hoods 86, 87

Vertical Flow Tunnels 88

Vikan, Cleaning Tool 56

Vinyl Gloves (PVC, extended sleeves) 31

Waste Bins 84

Wet Areas, Shoes 39

Wet Cleaning Equipment 58 ff

Wet Processing Equipment 89

Wet Vacuum Cleaner 69 ff

WFI (Pre-wetted Wipers) 45

Wiper-Dispenser 43

Wipers 40 ff

Wipers, Pre-wetted 45

Work Zone (Flooring) 55


IMPRINT

Glossary

AMBI: ambidextrous (not handspecific)

DGHM (new: VAH): Deutsche Gesellschaft für Hygiene und Mikrobiologie

DVG: Deutsche Veterinärmedizinische Gesellschaft

ESD: Electro Static Discharge

FDA: Federal Drug Administration

MRSA: Multiresistente Staphylococcus Aureus

PE: Polyethylene

PES: Polyester

PP: Polypropylene

PU: Polyurethane

PVA: Polyvinylalcohol

QAV: Quatäre Ammoniumverbindungen

RKI: Robert Koch Institut

Tbc: Tuberculose

TY: Tyvek®

VAH (former DGHM): Verbund für angewandte Hygiene

WFI: Water for Injection

Our experienced Full Service partners:

Abeba l Berkshire l Bimos l decontam (Schlee) l Dycem l Intersteri

ITW Contamination Control l JohnsonDiversey l OAK l QRP l Palbam Class

Precision Fabrics Group l SAP l Schenker l Schürr l Showa l Simco l TigerVac

Imprint

Editor:

basan GmbH

Bachstrasse 22

65830 Kriftel · Germany

Tel. +49 6192 9986-0

Fax +49 6192 9986-50

[email protected]

www.basan.com

Director: Jacobus C. Bartels, Frank Braun

Trade Register: Frankfurt HRB

Registerno.: 22956

VAT-Identification No.: DE 114 124 111

Layout:

Eva Kourimsky

www.kourimsky-design.de

Print:

Libro Johannes Witt GmbH & Co. KG

Gutenbergstraße 1

65830 Kriftel

www.libro.de

Copyright:

All rights reserved.

Copyright contents may not be reproduced in any

manner. Pictures and texts are not binding and

subject to changes. We have carefully checked the

contents of this catalogue. However, we cannot

accept responsibility for errors, omissions or possible

obsolescence.

Date: July 2009

PN20-ENG

basan Headquarters

basan GmbH

Bachstrasse 22


Tel. +49 6192 9986-0

Fax +49 6192 9986-50

[email protected]

basan Subsidiaries

basan BVBA

Hoek 76

2850 Boom · Belgium

Tel. +32 3 8 44 44 00

Fax +32 3 8 44 66 00

[email protected]

basan France Sarl

Novespace Rodania - Centr’Alp

122, Rue du Rocher de Lorzier

38430 Moirans · France

Tel. +33 4 76 67 60 00

Fax +33 4 76 55 70 53

[email protected]

basan GmbH

Bachstrasse 22


Tel. +49 6192 9986-0

Fax +49 6192 9986-50

[email protected]

basan Italy S.r.l.

Centro Direzionale Colleoni

Palazzo Orione - Ingresso 1

Viale Colleoni n. 13

20041 Agrate Brianza (MI) · Italy

Tel. +39 039 68 99 902

Fax +39 039 68 99 702

[email protected]

basan Cleanroom Malaysia

Sdn Bhd

77B (1st & 2nd Floor) Bayan Bay

Persiaran Bayan Indah

Sungai Nibong

11900 Penang · Malaysia

Tel. +60 (0) 4-6455918

Fax +60 (0) 4-6455928

[email protected]

basan B. V.

Minervum 7210

4817 ZJ Breda · Netherlands

Tel. +31 76 57 22660

Fax +31 76 57 22661

[email protected]

basan Asia Pacific Pte Ltd

3 Changi Business Park Vista

Singapore 486051

Tel. +65 6511 5730

Fax +65 6511 5738

[email protected]

basan UK Ltd

3, Newton Court, Rankine Road

Basingstoke Hants RG24 8GF

United Kingdom

Tel. +44 1256 364 711

Fax +44 1256 364 722

[email protected]

basan Asia Pacific Pte Ltd

Unit 606 Indochina Park Tower

4 Nguyen Dinh Chieu Street

District 1, Hochiminh City · Vietnam

Tel. +84 8 220 2236

Fax +84 8 220 2237

[email protected] www.basan.com

life science catalogue sciences catalogue.pdf · cleanroom consumables such as wipers, gloves,...

Documents