wipers minicat
DESCRIPTION
Limpiaparabrisas FordTRANSCRIPT
-
7/21/2019 Wipers Minicat
1/16
-
7/21/2019 Wipers Minicat
2/1622 (800) 221-36732 (800) 221-3673
1940 Coupe-Sedan shown.
Every component of our wiper tower kitsis carefully inspected, hand assembledin our shop and checked for f lawlessfunction. Complete assemblies ready toinstall on wiper motor.
The chrome on our wiper tower baseis beautiful and the dimensions areidentical to the originals. Includes RH & LHassemblies with mounting hardware.
1937-1940 Car Wiper Tower Kits
7BIGREASONSwhy
BobsWiper
Towerskeepthebeat
WIPER SHAFTS
Precision machinedspline & threaded.
7TOWER BASES
Die-cast, withtriple-plated chrome.
1
DRIVE CHAINSpecial stair-stepchain like original.6
3 DRIVE SPROCKETSDie-cast pivot link forshaft, chain & drive arm.
5
PIVOT SHAFT
CNC-machined steel.
DRIVE LINK
Steel pivot ball castin sprocket arm.
2
DRIVE ARMS
Die-stamped steel.Zinc plated.
4
1937-39 Convertible & Station Wagon
78-17552/3
All Kits IncludeMounting Hardware, Tower Base Pads
& Wiper Arm Nuts
Your Choice $175.00 kit
193740 WIPER SHAFT ENDBobs wiper towers will accept
Original Style & Style Armsthat use mounting nuts.
NarrowBase
1940Coupe & Sedan
1940-41 Sedan Delivery
01A-17552/3-D
NarrowBase
WidBas
1940 Convertible & Station Wagon
01A-17552/3-C
-
7/21/2019 Wipers Minicat
3/16www.bobdrake.comwww.bobdrake.com
WIPER ASSEMBLYPerfect copy of the original assembly. Includes wiper base gaskets, chromebezels and nuts, drive arm grommets with everything assembled. Can bemodified to fit 1941-42 & early 1946 Ford cars and other custom applications(18.5" between tower centers). Ready to install. Accepts original vacuummotor or Drakes 12-volt electric wiper conversion kit motor.
51A-17500 $175.00 each
Late194
6
1947-48
WIPER DRIVE ARM TO MOTOR GROMMET
51A-17562 $5.00 eachSee page 15
41
42-46
Small hole,no need forgrommet.
Hole
Mounts on cowl.
Mounts on cowl.
Larger hole,grommet51A-17562$5.00 each
Wiper Arm - Adapter BushingThese aluminum machined bushings
fit on the end of the tower shaftsand are attached with set screws.You must use push-on wiper arms. AK12 1941-48 "K58 Modern Arm "
Your Choice $8.00 each
Wiper Nut78-17481$15.00 pair
Wiper Nut78-17481
$15.00 pair
Chrome Plated Wiper KnobB-17513 $8.00
See page 14
Chrome PlatedWiper KnobB-17513 $8.00See page 14
Bezel78-17515$10.00 eachSee page 15
Hex Nut
Grommet11A-17541$3.00 eachSee page 15
Wiper Shaft
has a holeuses any B- wiperarms, see page 4
Roof Grommetsee page 15
LH RH
Typical 1932-37Wiper Motor
1937-38Wiper Motors
Typical 1939Coupe - Sedan
Wiper Assembly(mounts above windshield)
Wiper MysteriesFords
"
A
This wiper assembly uspush-on wiper arms
-
7/21/2019 Wipers Minicat
4/1644 (800) 221-36734 (800) 221-3673
OriginalHook
BladeConnector
1932-1948 Wiper Arms & Blades
Your Choice $20.00 each
B-17529-A 8"
B-17529-B 9"
B-17529-X 12"
$20.00 each 1937-40 Convertible& Station Wagon
1940 Coupe & SedanRH or LH
01A-17526 $25.00 each
1940-47 Pickup & Commercial
RH 01C-17526
LH 01C-17527
$25.00 each
1941-48 All Bodies
RH 11A-17526
LH 11A-17527
$25.00 each
OriginalStyle
OriginalStyle
1937-39 Coupe & Sedan- RH or LH
78-17529 $25.00 each
1932-36 All Bodies
NEW IMPROVEMENT
Now with more arm &blade pressure on glass
We are proud to offer our complete line of original style & hot rod wiper arms
& blades. They are detail perfect in every respect and will give you years of
clean dry windshields.
New from Bob. Custom cut to many sizes. Great for tall T s to 4" chops.Mounting end fits motors where the wiper shaft has a hole in it. Uses
78-17528-B or 21A-17528 blade to get the perfect custom fit.
Cut to Length and Build Your Own
12"
Cut herefor size
you need
Bent asoriginal
Bent as original
Wiper Arm Nut
78-17481 $15.00 pair
1932-19408" length
1941-19489" length
78-17528-B 1932-40 8" length
21A-17528 1941-48 9" length
Your Choice $10.00 each
9"
8"
Our blades have polished stainless steelframes and attaching clips. The difference is in
the rubber. The originals had a stack of die cut hardrubber to form the V blade. Ours is extruded of a softer
rubber and incorporates a T guard to protect the windshield glassagainst possible scratches from the stainless steel edge of wiper blade.
1932-48 Wiper BLades
1937-40 Car & 1937-47 Pickup
WIPER ARM NUTSHolds wiper arms to towers.
Polished stainless steel.
78-17481 $15.00 pair
1932-36
Allourwiperblades
areflatbecauseyou
r
windowisflat.None
ed
forflex-bridgeblade
s.
-
7/21/2019 Wipers Minicat
5/16www.bobdrake.comwww.bobdrake.com
Each style mounts to the wiper pivot shafts just like the originals, but use the later style blades which
attach more securely. Designed especially for use with higher speed electric wiper systems, the blades offe
superior water removal for optimum wet weather visibility. Each kit comes with RH & LH arms and blades.
Original Mounting Ends with Modern Blades
1937-1948 Wiper Arm & Blade Kits
YESTERdAYSST
YLE-
TOdAYSTECHNO
LOGY
Specialty Power WindowsWiper System
This push-on style matchesoriginal and will fit
1941-48 All Body Styles
11A-17526/7-NK
KITS INCLUDE2 Stainless Arms 2 Stainless Wiper BladesArm dimensions shown from center of pivot to blade mounting dimple.
1937-40 Convertible & Station Wagon1940 Coupe & Sedan
01A-17526/7-NK
1940-47 Pickup
01C-17526/7-NK
RUBBER WIPER BLADE REFILLSRefills slide in and clip tight in place.Modern edge design offers superiorwater removal and long life.
78-17528-RF 8"
21A-17528-RF 9"
$5.00 each
WIPER ARM PIVOTMOUNTING ENDSSAME AS ORIGINAL
NEW IMPROVEMENT
Now with more arm &blade pressure on glass
Bent as original
Bent asoriginal
Wiper Arm Nut
78-17481 $15.00 pairSee page 4
Kit includes (2) 8" wiper blades
Kit includes (2) 9" wiper blades
Kit includes (2) 8" wiper bladesKit includes (2) 8" wiper blades
Small clip needs
to be pushed in to
install and remove
wiper arm.
1937-39 Coupe & Sedan
78-17526/7-NK
Wiper Blades8" - 9"
11A- Style Wiper Arm
Push clip
down and
hold.
Dimple
Wiper arm pivot mounting
end same as original.
Wiper arm pivot
mounting end
same as original.
Wiper arm pivot
mounting end
same as original.
Your Choice $65.00 kit
-
7/21/2019 Wipers Minicat
6/1666 (800) 221-36736 (800) 221-3673
A is the total length
including blade
These are simply modified versions of our beautiful, original style stainless arms, each now fitted with ousplined mounting bases so theyre perfect for use with the Specialty Wiper Systems shown below. Theyaccept and come with our later style stainless blades offering super secure attachment to the arms. Alsoperfect for many non-Fords using this system.
Specialty Wiper Arms & Blades
COMPLETE RH & LH KITS
2 Stainless Arms 2 Stainless Wiper BladesArm dimensions shown from center of pivot to blade mounting dimple.
$65.00 kit
Specialty Power Windows Wiper System
Small clip needsto be pushed in toinstall and remove
wiper arm.
All wiper arms onthis page feature thisstyle push on end.
DIMPLE
DIMPLE
DIMPLE
8"
FITSDIMPLE ON ARM
8" OR 9"
PUSH-ONENdWITHNEWS
NAP-IN
BLAdEdESIGN
01A-17526/7-SKS 5" Arm / 8"Blade 10"
01A-17526/7-SKL 5" Arm / 9" Blade 10"
11A-17526/7-NKS 9" Arm / 8" Blade 14"
11A-17526/7-NK 9" Arm / 9" Blade 14"
01C-17526/7-SKS 8" Arm / 8" Blade 13"
01C-17526/7-SKL 8" Arm / 9" Blade 13"
78-17526/7-SKS 7" Arm / 8" Blade 12"
78-17526/7-SKL 7" Arm / 9" Blade 12"
7"
5"
Centerof wiperarm shaft
A
A
A
A
FITSALLYE
ARS
FITSMANY
NON-FORDS
TOO!
DIMPLE
9"
A
You decideMeasure from the center line of yourwiper arm shaft in an arc across yourwindshield. Find the farthest pointwithout hitting the windshield frame,rubber or the opposite wiper blade.
NEW IMPROVEMENT
Now with more arm &blade pressure on glass
-
7/21/2019 Wipers Minicat
7/16www.bobdrake.comwww.bobdrake.com
1937-1939CLOSED CAR
1937-1939
CONVERTIBLE & STATION WAGON
1940CLOSED CAR
1940CONVERTIBLE & STATION WAGON
1940-1947
PICKUP
1941-1948Car
Wiper Arm Positions
10 Big Reasons Why
Bobs Wiper ArmsAre UniqueNo other reproduction wiper arms are made
like Bobs. He uses the same exact design and
materials that Ford did. Other makers take big
short-cuts in design and quality. Bobs are
made using only the finest components
to assure long life and flawless function.
DONTGETCAUGHTINTHE
RAINWITHOUTEM!
STAINLESS STEEL RIVETS (strong, wont rust)
ROLLER BUSHINGS (smooth action)
4. Die-cast CHROMEPLATED HOUSING
(show quality plating)
5. STAINLESS STEEL COVER (highly polished)
6. STAINLESS STEEL
SPRING BAR (nice firm tension)
7. SPACER (added strength)
8. STAINLESS STEEL HOOK END (attaches and allows
proper blade wiping angle)
3. STEEL SPLINED INSERT(long life, no slippage)
9. Assembled by Drake
We added more down pressure.
2
13
4
5
6
7
8
9
10
Some other reprowiper arms donthave the rollerbearings. Bobs are
like the originalsgiving yousmooth action.
Unlike some other manufacturer
Bob uses a steel bushing withteeth to match up with thewiper shaft. This will keep it fromstripping out.
-
7/21/2019 Wipers Minicat
8/1688 (800) 221-36738 (800) 221-3673
Original Ford Accessories1932-36 Car
TANDEM WIPER KITAn affordable and easy way to get dual wipers which look like the original factory accessory units sold back in the day. Yourexisting single motor (vacuum or electric) actuates both using the linkage as shown. Kit has 2 arms, 2 blades, passenger sidepivot post and cross shaft. Easyto install. Adds value and function.
68-17574 $35.00 kit
THREADEDSWIVEL
PIVOT POST
CROSS SHAFT
ORIGINALHOOKSTYLE
OriginalAccessor
y
THREADEDSWIVEL
Universal
HAND WIPER ASSEMBLYAn excellent option for adding a wiper to closed or open cars where mountingspace is limited. This old-school setup offers simplicity and dependability with nopossible electrical failure and few moving parts. Its unlimited wiper speed andpark position is all up to the operator!
HR-17655-AR $25.00 each
1940
WIPER MOTOR & CONTROL
1941-48
CABLE & WIPER MOTOR SWITCHES
VACUUM
CABLE
OriginalStyle
Examplesof
originalpartsfrom
BobsCollections
-
7/21/2019 Wipers Minicat
9/16www.bobdrake.comwww.bobdrake.com
1928-1936 Open Car, 1928-1939 Closed Car & Pickup
COMPACT 12 VOLT "MIGHTY WIPER" MOTORSAn excellent upgrade from the original vacuum units. Features adjustable arm-park and 32" power supply lead. Choose eithstraight drive shaft or threaded tapered drive shaft. Includes wiper arm nut, drive shaft bezel bushing, fuse and connector socwith complete installation instructions. A real problem solver in adding dependability and safety. Easy to install.
Use with above MW-17508-T Wiper Motor Kit
MightyWiper
Electric Wiper Motors
1932-36 Open Car1932-39 Closed Car & Pickup (with modification)
12VOLT WIPER MOTOR KITBuffed stainless steel cover. Designed to use your remote switIncludes stainless arm & blade. 1932-39 closed car & pickup requ
modification for mounting.A-17508-SS $50.00 kit
1932-36 Open Car1932-39 Closed Car & Pickup (with modification)
6 OR 12VOLT WIPER MOTOR
Single speed unit with black painted steel cover. On-off switchis mounted on the back of unit. 1932-39 closed car & pickuprequires modification for mounting.
A-17508-E6 6-Volt A-17508-E12 12-Volt
$50.00 eachWorks with our Mighty Wiper Straight Shaft Arm & Blade Kit(HR-70127) below, or for the original style arm and blade:
Wiper Blade
78-17528-B 8" length21A-17528 9" length
$10.00 each
Wiper Arm
B-17529 1932-36 $20.00 each
MOTOR WITHTHREADED TAPERED DRIVE SHAFeatures threaded shaft with chrome arm nut. Use
with our MW-17526-K arm and blade kit shown belo
MW-17508-T $140.00 each
MOTOR WITH STRAIGHT DRIVE SHAFTUse with our HR-70127 Wiper Arm and
Blade made specially for this application.
MW-17508-S $140.00 each
Use with above A-17508-E6/E12 or MW-17508-S
Wiper Motor Kits
MIGHTY WIPER STRAIGHT SHAFT ARM & BLADE KIT7.5" long arm holds 11" long blade (can be trimmed). Eachfeatures all polished stainless steel construction with a strongtension spring for years of trouble-free use and super cleanwiper action.
HR-70127 $20.00 kit
MIGHTY WIPER THREADED SHAFT ARM & BLADE K
Old school looks with modern function. 1940 original stchrome pivot head with polished stainless arm. Comes wour all-stainless modern-style 8" blade fitted with hiquality rubber for easy replacement and dependability.
MW-17526-K $35.00 kit
MW-17508-S
Straight shaft78-1748
$15.00 ea
MW-17508-T
Tapered shaft2"
"Threa
ds
1"
1"
4"
OriginalHookStyle
Uses
originalnut.
-
7/21/2019 Wipers Minicat
10/161010 (800) 221-367310 (800) 221-3673
PUSHONWe offer (3)style lengths.
See 4, 5, & 6
WIPER ARM SHAFT
Small clip needs
to be pushed in to
install and remove
wiper arm.
WIPER ARM NUT
CLIPONWe offer (3)
style lengths.See page 4
SCREWONWe offer (3)
style lengths.See page 4 & 5
WIPER MOTOR SHAFT
HOLE
CLIP
Specialt y Power WindowsWiper Systems
78-17481
$15.00 pair
32-36
37-40 41-4
8
1932-19408" length
1941-19489" length
78-17528-B 1932-40 8" length
21A-17528 1941-48 9" length
Your Choice $10.00 each
9"
8"
Our blades have polished stainless steelframes and attaching clips. The difference is in
the rubber. The originals had a stack of die cut hardrubber to form the V blade. Ours is extruded of a softer
rubber and incorporates a T guard to protect the windshieldglass against possible scratches from the stainless steel frame.
1932-48
Wiper BLades
Original
Hook Style Blade
Original Original
Original
Wiper Arm - Adapter BushingThese aluminum machined bushingsfit on the end of the tower shaftsand are attached with set screws.You must use push-on wiper arms. AK12 1941-48 "K58 Modern Arm "
Your Choice $8.00 each
"
A
-
7/21/2019 Wipers Minicat
11/16www.bobdrake.comwww.bobdrake.com
I DONT GET IT, SAM. WHATSSO GREAT ABOUT BOB'S NEWWIPER ARMS & BLADES?
Look Dudley, The old fashioned hookend is gone. Its the samebeautiful arm but now ithas a snap-in modern end.
CLEAN SWEEP
Wow! Heres theblade. It lookspretty nifty.
The real treat is that the arm locks
the blade in place tokeep it rigid so the
rubber acts like asqueegee.
Right! Its a nohassle job. Theclip is plastic so
it doesnt hurt your
fingers.
This refill is cool.I can change itjust like on my newFord.
1. WIPER ARM- These are basically the same high quality,original style, polished stainless arms that we have been making formany years right here in the good ol U.S.A. We changed the end alittle to accept our new smooth action. blades.
3. WIPER ARM END BOSS- The raised boss locks tightly into thepivot head on the blade, allowing no side motion, making the arm andblade a solid unit for effective wiping action.
4. WIPER BLADE BODY - Super clean, lowprofile, all stainless construction. Rib design adds strengthand good looks. Some manufacturers use bridge typetensioners on their blades to conform to curved glasswhich adds height. All 1932-1948 Fords have flatwindshields so there is no need for those ugly bridges.
5. PIVOT HEAD- Polished stainless for goodlooks. Strong spring action locks securely onto arm.Will fit any of Bobs New Snap-In Style arms.
6. RIVET HEAD - We carefully install a Stainless Steeltubular rivet to insure the head is up and lookin good when thewipers are in the park position. We also do the same on the arm;creating a RH and LH assembly. Its just our extra attention to detail.
RUBBER REFILL- Quick change refill thatsnaps into place - no need for pliers and gloves.
These are easy on the fingers. You dont have toreplace the whole blade just the low-buck refill.
2 Sizes available.Both will fit new snap-in style blades.
$5.00 each
2. WIPER ARM MOTOR MOUNTING END- Theother end of our new arm still fits your original wiper toweror wiper motor shaft so in a jiffy you can switch from theRain Beater Snap-In Style" for go, to the Original Hook-InStyle for show.
7. WIPER RUBBER - Installed for you in the metal blade is aprecision formed rubber blade featuring a sharp wiping edge forgreater efficiency and long life.
78-17528-RF
1937-1940
8"
21A-17528-RF
1941-19489"
THe arM
THe MeTaL BLade
1937-1939 SHOWN
2 LENGTHS: 8" & 9"
THe rUBBer
See page 5
See page 5
-
7/21/2019 Wipers Minicat
12/161212 (800) 221-367312 (800) 221-3673
12VOLT, 2SPEED WITH SWITCH
Designed to easily replace the original,sluggish vacuum-drive units. Each kit featuresour super dependable, 2-speed electric wipermotor with switch, our custom engineeredmounting brackets and hardware. These easy-to-install kits use the original motor locationand attach to your original wiper linkage.Detailed installation instructions included.
Make wet weather driving safer and more enjoyable.
by
1940 All Body StylesHeavy duty 2-speed, automatic park.
01A-17508-E12
$200.00 kit
1940-48 Ford CarElectric Wiper Conversion Kits
Youll remove both, theoriginal wiper motor and itsmounting bracket from theinterior side of the firewall,beneath the dash panel.
Great for 32-39 Coupes & Sedans12VOLT WIPER SYSTEMS
This is the most adaptable universal system that we have everseen. The flex cable and transmissions work together like arack and pinion system. The motor itself is mounted remotely
under the dash or behind the kick panel or wherever space isavailable, giving you many options.
Mount wipers overhead like the original1932-1939 or put them in the cowl.
Great replacement in 1941-48 cars where the originalequipment is missing.
Adjustable sweep of 90 to 160. You set the park position: inboard, outboard, right side
or left side. Tell your buddy with the Chevy or Willys that these will
work for them too, fiberglass or steel cars. Comes with written instructions and a DVD
showing actual installation.
SPECIALTY WIPER SYSTEMSB-17508-A With 2-speed switch $285.00
B-17508-B With Delay switch $325.00
THIS SYSTEM USESTHE ABOVE BLADES & ARMS
12-VOLTMOTOR
CAMDRIVEARM
WIRING
DELAY SWITCH(Optional)
FLEX CABLE
(2) TUBESTO HOLD
FLEX CABLES
2-SPEEDSWITCH
(2)TRANSMISSIONS
MOUNTINGBOX
Specialty Wiper SystemsSpecialty Power Windows Wiper System
-
7/21/2019 Wipers Minicat
13/161www.bobdrake.comwww.bobdrake.com
I want wiper towers like the 40 Passenger
1946-48 All Body StylesDesigned for use with original
radio and dash accessories.
51A-17508-E12
$200.00 kit
1941-42 All Body StylesHeavy duty 2-speed with
automatic park.Not designed for use with
original 1941 radio.
11A-17508-E12
$200.00 kit
01C-17508-K $375.00 kit
Complete instructions & templates included
A
J, K
B
C
D E
F
GH
I
G: (2) Wiper Blades 8-1/4"
H: (2) Wiper Arms (Pair)
I: (1) Pre-wired 2-Speed Switch
J: (7) 1/4"-20 x 3/4" Hex Bolts
K: (7) 1/4" Lock Washers
A: (1) 12V Motor & Bracket
B: (1) Spindle Platform Assembly & Hardware
C: (1) Dash to Firewall Mounting Bracket
D: (2) Wiper Towers with Pads, 2 Drive Arms
E: (4) Drive Arm Washers (2 black & 2 clear)
F: (1) Drive Arm Spring Clip (fastens drive arms)
COMPLETE KIT INCLUDES:
1940-47 Pickup
12VOLT, 2SPEED TANDEM WIPER KIT
Premium quality kit with specially engineered components made to adfactory style cowl-mount tandem wipers to these extremely popular truckSmooth function and beauty just like the cars came with. Our kit has bee
carefully designed with the right parts and hardware including complete, cleinstructions so you can easily install with great results.
PassengerCar
function&looks
foryourPickup!
-
7/21/2019 Wipers Minicat
14/161414 (800) 221-367314 (800) 221-3673
Wiper KnobsEach is exact shape and color. Note: 1932-36 knobs are chrome; 1937-48 are plastic. 1938-39 plastic Closed Carknobs are screw-on type with threads. 1937-1939 Convertible & Station Wagon, & 1940-1948 knobs are push-on.
B-17513 81A-17513-A78-17513-B 91A-17513-A81A-17513-B 01A-17513-A 01A-17513-B91A-17513-B
21A-17513-A 21A-17513-B 51A-17513-A 21C-1751351A-17513-B 51A-17513-C11A-17513 09A-17513
B-17513 1932-36 All & 1937 Coupe & Sedan Chrome screw-on
78-17513-B 1937 Deluxe Convertible & Station Wagon Yellow-Brown push-on
81A-17513-A 1938 All Closed Cars Ivory screw-on
81A-17513-B 1938 Convertible & Station Wagon Ivory push-on
91A-17513-A 1939 Coupe, Sedan & Sedan Delivery Light Yellow screw-on
91A-17513-B 1939 Convertible & Station Wagon Light Yel low push-on
01A-17513-A 1940 Standard All Bodies & 1940-1941 Pickup Sand push-on
01A-17513-B 1940 Deluxe All Bodies Maroon push-on
11A-17513 1941 Special, Deluxe & Super Deluxe, Coupe, Sedan, Convertible & Station Wagon Tan push-on
21A-17513-A 1942 Special Coupe & Sedan Maroon push-on
21A-17513-B 1942 Deluxe, Super Deluxe, Coupe, Sedan, Convertible, Station Wagon, Sedan Delivery Butterscotc h push-on
51A-17513-A 1946 Deluxe Coupe & Sedan Chocolate push-on51A-17513-B 1946 Super Deluxe Coupe, Sedan & Sedan Delivery Blue-Gray push-on
51A-17513-C1946 Super Deluxe, Convertible, Station Wagon, Sportsman, 1947-48 Deluxe, Super
Deluxe, Coupe, Sedan, Convertible, Station Wagon, Sedan Delivery & SportsmanGray-Tan push-on
09A-17513 1940 Coupe, Sedan & Convertible Dark Blue push-on
21C-17513 1942-47 Pickup & Commercial Black push-on
These are switch assemblies which mount in the center of the upper dash and go through a lot of wear and tear over the years.They are constructed to match the originals perfectly. Each switch is complete with sleeve, nut and wiper knob. Use specified partnumbers below when ordering. Note: 1937-39 are for Convertibles and Station Wagons only.
01C-17535
21C-17535
Pickup&Commercial
OriginalStyle
OriginalStyle
Wiper Controls with Knobs
78-17535 1937 Convertible & Station Wagon Yellow-Brown
81A-17535 1938 Convertible & Station Wagon Ivory
91A-17535 1939 Convertible & Station Wagon Light Yellow
01A-17535-A 1940 Standard, Coupe, Sedan & Station Wagon Sand
01A-17535-B 1940 Deluxe, Coupe, Sedan, Convertible, Station Wagon, Sedan Delivery Maroon
51A-17535-B 1946 Super Deluxe Coupe & Sedan Blue-Gray
51A-17535-C1946 Super Deluxe Convertible, Sportsman & Station Wagon,
1947-48 All Body StylesGray-Tan
01C-17535 1940-41 Pickup Sand
21C-17535 1942-47 Pickup Black
51A-17535-C51A-17535-B78-17535 01A-17535-A91A-1753581A-17535 01A-17535-B
Fordy Style Knob & Collar
Polished 01A-9270-SR
Black 01A-9270-SRB
$7.50 each
Mercury Style Knob & Collar
Polished 09A-9270-SR
Black 09A-9270-SRB
$7.50 each
2-Speed Wiper SwitchTurn-knob style, 4 push-on tabconnector terminals. 6 or 12 volt.
HR-60760-SW $15.00 each
YourChoice$45.00each
YourChoice$8.00each
-
7/21/2019 Wipers Minicat
15/161www.bobdrake.comwww.bobdrake.com
1939-48
WIPER HOSE/FIREWALL GROMMETSUse the right grommets for your projects!
91A-17545 1939 $2.00 each
01A-17545-A 1940 Convertible $2.00 each
01A-17545-B 1940-48 Closed Car $2.00 each
21C-17265 1942-47 Pickup $4.00 each
1937-48
WIPER CLIP & SPRINGHolds wiper drive arms to motor.
78-17450 1937-40 All bodies
11A-17450 1941-48 All bodies
$5.00 each
1947-48 Coupe, Sedan & Convertible
WIPER SHAFT PIVOT NUTSpecial machined, chrome plated.
356094-S $6.00 each
1946-48
WIPER DRIVE ARM TO MOTOR GROMMETPrevents slop in wiper system. 2 required.
51A-17562 $5.00 each
1937-40
WIPER TOWER PADSPressure-molded black rubber fits between cowl & wiper towSeals out water and reduces noise from wiper system.
78-17556 1937-40 Convertible & Station Wagon
01A-17556 1940 Closed Car & 1941 Sedan Delivery
$10.00 pair
78-1755601A-17556
Wiper Components& Miscellaneous
Original Style 78-17537
01A-17537
78-17577Grommet
1937-40
WIPER CONTROL RODSRod connects wiper switch to vacuum motor. Dimensionacorrect for easy installation. Grommet included.
78-17537 1937-40 Convertible & Station Wagon $10.00 ea
01A-17537 1940 All Closed Cars (except wagon) $10.00 ea78-17577 1937-40 Wiper Control Grommet $1.00 ea
1932-48
WIPER MOTOR SHAFT TO ROOF GROMMETThis rubber grommet seals and prevents leakage where wipershaft extends through body.
40-17541 1932-34 Coupe & Sedan, rubber $3.00 each
48-17541 1935-36 Coupe & Sedan, rubber $3.00 each
11A-17541 1937-39 Coupe & Sedan, leather
1941-46 Couple & Sedan
1939-47 Pickup $3.00 pair
7C-17541 1947-48 Coupe & Sedan, leather
1948-52 Pickup $3.00 pair
40-17541SHOWN
1937-48WIPER MOTOR SHAFT BEZELS
Each is a perfect match to the originals.Excellent chrome-plating.
1937-39Coupe & Sedan
78-17515 $10.00 each
1947-48Coupe, Sedan &Convertible7C-17515 $15.00 each
1941-46Coupe & Sedan
11A-17515 $20.00 pair
-
7/21/2019 Wipers Minicat
16/16
Ford Cars 1932-48 Ford Pickups 1932-66
1819 N.W. Washington Blvd Grants Pass, Oregon 97526 Wiper Flyer 2013
(800) 221-3673Fax: (541) 474-0099 www.bobdrake.com
New Parts for old Fords &Hot Rods
WIP-13
CallOurFri
endlySales
StaffToday!
Our Wipers Fit SomeNon Fords Too!
HaveWipe
r
Questions
?
A Mini-Catalog of
Wiper Arms,Blades
& Related Products
A bit of memorabilia from Bobs collection