level measurement accessory - library.e.abb.com branch nipple for butt welding, connected to chamber...

ECLevel Measurement Accessory

Data sheet DS/EC-EN Rev. I_02_2015

Measurement made easy

External ChamberK-TEK Products

Measurement made easy

Features – Provides for easy isolation from process vessel – Use with magnetostrictive and guided wave radar

transmitters to replace conventional displacer type transmitters and controllers

– Use with MS50 for externally caged float switch – Designed to ASME B31.1, B31.3 as applicable – Certification to NACE MR0175 or MR0103 available

2 EC Level Measurement Accessory | Data sheet

Sample Applications

EC w/ MS50 for High Level Alarm

KM26 w/ EC & MT5000 For Redundant Level Indication &

Measurement

EC w/ AT100 for Liquid to Liquid Interface Level

Measurement

MADE IN USA LOUISIANA, 70769 TAG0137

K-TEK PRODUCTS

K-TEK PRODUCTS

K-T

EK P

RO

DUCTS

Ordering Information

EC.a.b.c.d.e.f.g.h.i.j.k.l.m - list additional required ordering codes separated by periods

.a Chamber MaterialCST Carbon SteelLCS Low Temperature Carbon SteelSS4 304 / 304L Stainless SteelSS6 316 / 316L Stainless Steel

.b Chamber Size (Chamber ID must be a minimum of 1” larger than the float OD; when float is used.)20 2.0 in. NPS (MT5000 Transmitter Only)25 2.5 in. NPS (Chamber size must be a minimum of 1.0 in. (25 mm) greater than Float outside diameter when float is used)30 3.0 in. NPS (Chamber size must be a minimum of 1.0 in. (25 mm) greater than Float outside diameter when float is used)40 4.0 in. NPS (Chamber size must be a minimum of 1.0 in. (25 mm) greater than Float outside diameter when float is used)

.c Chamber Pipe Schedule (Wall Thickness)

10 Schedule 101

40 Schedule 4080 Schedule 80

.d Top ConnectionG Slip-On FlangeB1 Blind Flange with Mating Slip-On Flange with FNPTF Weld Neck FlangeD1 Blind Flange with Mating Weld Neck Flange with FNPTW1 Welded Flat Pipe Cap with FNPT

.e Side Vent Connection; These can also be Flanged Connections, which could be the same as the side connections.N0 Branch Nipple for Socket Welding (Flat)N2E Branch Nipple for Butt Welding, Connected to Chamber via Extruded Outlet1

N2 Branch Nipple for Butt WeldingN3E MNPT Branch Nipple for Butt Welding, Connected to Chamber via Extruded Outlet1

N3 MNPT Branch Nipple for Butt WeldingC0E FNPT Half Coupling Connected to Chamber via Extruded Outlet1

C0 FNPT CouplingX None

Data sheet | EC Level Measurement Accessory 3

Ordering Information (continued)


.f Side Connection 1C0 FNPT CouplingC0E FNPT Half Coupling Connected to Chamber via Extruded Outlet1

C1 Socket Weld Half CouplingFE Weld Neck Flange connected to Chamber via Extruded Outlet1

F0 Weld Neck Flange with Pipe SaddleF0E Weld Neck Flange connected to Chamber via Extruded Outlet with Pipe between Chamber and Weld Neck Flange1

F1 Weld Neck Flange with Weld-O-Let (Minimum Schedule 40 Chamber)

F3 Weld Neck Flange with Concentric Reducer

F3E Weld Neck Flange with Concentric Reducer Connected to Chamber via Extruded Outlet1

GE Slip-On Flange Connected to Chamber via Extruded Outlet1

G0 Slip-On Flange with Pipe NippleG1 Slip-On Flange with Weld-O-Let and Pipe Nipple (Minimum Schedule 40 Chamber)G3 Slip-On Flange with Concentric Reducer and Pipe NippleG3E Slip-On Flange with Concentric Reducer and Pipe Nipple Connected via Extruded Outlet1

N0 Branch Nipple for Socket Welding (Flat)N2 Branch Nipple for Butt WeldingN2E Branch Nipple for Butt Welding, Connected to Chamber via Extruded Outlet1

N3 MNPT Branch NippleN3E MNPT Branch Nipple, Connected to Chamber via Extruded Outlet1

X None.g Side Connection 2

C0 FNPT CouplingC0E FNPT Half Coupling Connected to Chamber via Extruded Outlet1

C1 Socket Weld Half CouplingFE Weld Neck Flange connected to Chamber via Extruded Outlet1

F0 Weld Neck Flange with Pipe SaddleF0E Weld Neck Flange connected to Chamber via Extruded Outlet with Pipe between Chamber and Weld Neck Flange1

F1 Weld Neck Flange with Weld-O-Let (Minimum Schedule 40 Chamber)

F3 Weld Neck Flange with Concentric ReducerF3E Weld Neck Flange with Concentric Reducer Connected to Chamber via Extruded Outlet1

GE Slip-On Flange Connected to Chamber via Extruded Outlet1

G0 Slip-On Flange with Pipe NippleG1 Slip-On Flange with Weld-O-Let and Pipe Nipple (Minimum Schedule 40 Chamber)G3 Slip-On Flange with Concentric Reducer and Pipe NippleG3E Slip-On Flange with Concentric Reducer and Pipe Nipple Connected via Extruded Outlet1

N0 Branch Nipple for Socket Welding (Flat)N2 Branch Nipple for Butt WeldingN2E Branch Nipple for Butt Welding, Connected to Chamber via Extruded Outlet1

N3 MNPT Branch NippleN3E MNPT Branch Nipple, Connected to Chamber via Extruded Outlet1

X None


Ordering Information (continued)


.h Botton ConnectionB2 Blind Flange with Mating Slip-On Flange with PlugB5 Blind Flange with Mating Slip-On Flange with Nipple, for Socket Welding (Flat)B7 Blind Flange with Mating Slip-On Flange with Nipple, MNPTB9S Blind Flange with Mating Slip-On Flange with Pipe Nipple and Slip-On FlangeB9W Blind Flange with Mating Slip-On Flange with Pipe Nipple and Weld Neck FlangeD2 Blind Flange with Mating Weld Neck Flange with PlugD5 Blind Flange with Mating Weld Neck Flange with Nipple, for Socket Welding (Flat)D7 Blind Flange with Mating Weld Neck Flange with Nipple, MNPTD9S Blind Flange with Mating Weld Neck Flange with Pipe Nipple and Slip-On FlangeD9W Blind Flange with Mating Weld Neck Flange with Pipe Nipple and Weld Neck FlangeG Slip-On Flange with Float Stop SpringF Weld Neck Flange with Float Stop SpringT3 T0 with Socket Weld Half CouplingT4P T0 with FNPT Half Coupling and PlugT5 T0 with Pipe Nipple, for Socket Welding (Flat)T7 T0 with Pipe Nipple, MNPTT9S T0 with Pipe Nipple and Slip-On Flange1

T9W T0 with Pipe Nipple and Weld Neck FlangeW2 Welded Flat Pipe Cap with Plug1

W3 W0 with Socket Weld Half Coupling1

W5 Welded Flat Pipe Cap with Nipple, for Socket Welding (Flat)1

W7 Welded Flat Pipe Cap with Nipple, MNPT1

W9S Welded Flat Pipe Cap with Pipe Nipple and Slip-On Flange1

W9W Welded Flat Pipe Cap with Pipe Nipple and Weld Neck Flange1

.i Top Connection Size/Rating/Type *see Table1

.j Side Vent Connection Size/Rating/Type *see Table1

.k Side Process Connection Size/Rating/Type *see Table1

.l Side Process Connection Size/Rating/Type *see Table1

.m Bottom Connection Size/Rating/Type *see Table1

Note: 1. Not an option with Carbon Steel or Low Temperature Carbon Steel chambers.


Table 1

Flanged Connections

Lapped

Joint Flanges:

Slip on Flanges:Socket Weld

Flanges:Weld Neck Flanges:

Size Pressure Rating

Raised Face RTJ Tongue &

GrooveMale /Female

Raised Face

Raised Face RTJ Tongue &

GrooveMale /Female

1/2”

150#300#600#900#

1500#2500#

L51L53L56L59

L515L525

SR51SR53SR56SR59

SR515N/A

SJ51SJ53SJ56SJ59

SJ515N/A

ST51ST53ST56ST59

ST515N/A

SM51SM53SM56SM59

SM515N/A

SWR51SWR53SWR56

N/ASWR515

N/A

WR51WR53WR56WR59

WR515WR525

WJ51WJ53WJ56WJ59

WJ515WJ525

WT51WT53WT56WT59

WT515WT525

WM51WM53WM56WM59

WM515WM525

3/4”

150#300#600#900#

1500#2500#

L71L73L76L79

L715L725

SR71SR73SR76SR79

SR715N/A

SJ71SJ73SJ76SJ79

SJ715N/A

ST71ST73ST76ST79

ST715N/A

SM71SM73SM76SM79

SM715N/A

SWR71SWR73SWR76

N/ASWR715

N/A

WR71WR73WR76WR79

WR715WR725

WJ71WJ73WJ76WJ79

WJ715WJ725

WT71WT73WT76WT79

WT715WT725

WM71WM73WM76WM79

WM715WM725

1”

150#300#600#900#

1500#2500#

L11L13L16L19

L115L125

SR11SR13SR16SR19

SR115N/A

SJ11SJ13SJ16SJ19

SJ115N/A

ST11ST13ST16ST19

ST115N/A

SM11SM13SM16SM19

SM115N/A

SWR11SWR13SWR16

N/ASWR115

N/A

WR11WR13WR16WR19

WR115WR125

WJ11WJ13WJ16WJ19

WJ115WJ125

WT11WT13WT16WT19

WT115WT125

WM11WM13WM16WM19

WM115WM125

1-1/2”

150#300#600#900#

1500#2500#

L151L153L156L159

L1515N/A

SR151SR153SR156SR159

SR1515N/A

SJ151SJ153SJ156SJ159

SJ1515N/A

ST151ST153ST156ST159

ST1515N/A

SM151SM153SM156SM159

SM1515N/A

SWR151SWR153SWR156

N/ASWR1515

N/A

WR151WR153WR156WR159

WR1515WR1525

WJ151WJ153WJ156WJ159

WJ1515WJ1525

WT151WT153WT156WT159

WT1515WT1525

WM151WM153WM156WM159

WM1515WM1525

2”

150#300#600#900#

1500#2500#

L21L23L26L29

L215N/A

SR21SR23SR26SR29

SR215N/A

SJ21SJ23SJ26SJ29

SJ215N/A

ST21ST23ST26ST29

ST215N/A

SM21SM23SM26SM29

SM215N/A

SWR21SWR23SWR26

N/ASWR215

N/A

WR21WR23WR26WR29

WR215WR225

WJ21WJ23WJ26WJ29

WJ215WJ225

WT21WT23WT26WT29

WT215WT225

WM21WM23WM26WM29

WM215WM225

2-1/2”

150#300#600#900#

1500#2500#

L251L253L256L259

L2515L2525

SR251SR253SR256SR259

SR2515N/A

SJ251SJ253SJ256SJ259

SJ2515N/A

ST251ST253ST256ST259

ST2515N/A

SM251SM253SM256SM259

SM2515N/A

SWR251SWR253SWR256

N/ASWR2515

N/A

WR251WR253WR256WR259

WR2515WR2525

WJ251WJ253WJ256WJ259

WJ2515WJ2525

WT251WT253WT256WT259

WT2515WT2525

WM251WM253WM256WM259

WM2515WM2525

3”

150#300#600#900#

1500#2500#

L31L33L36L39

L315L325

SR31SR33SR36SR39N/AN/A

SJ31SJ33SJ36SJ39N/AN/A

ST31ST33ST36ST39N/AN/A

SM31SM33SM36SM39N/AN/A

SWR31SWR33SWR36

N/AN/AN/A

WR31WR33WR36WR39

WR315WR325

WJ31WJ33WJ36WJ39

WJ315WJ325

WT31WT33WT36WT39

WT315WT325

WM31WM33WM36WM39

WM315WM325

4”

150#300#600#900#

1500#2500#

L41L43L46L49

L415L425

SR41SR43SR46SR49

SR415N/A

SJ41SJ43SJ46SJ49

SJ415N/A

ST41ST43ST46ST49

ST415N/A

SM41SM43SM46SM49

SM415N/A

N/AN/AN/AN/AN/AN/A

WR41WR43WR46WR49

WR415WR425

WJ41WJ43WJ46WJ49

WJ415WJ425

WT41WT43WT46WT49

WT415WT425

WM41WM43WM46WM49

WM415WM425

NOTES: 1. Extruded Outlets are full bore up to a maximum of 2” See Note 1, on page 7.2. Flat face flanges can be supplied in lieu of raised face. Replace "R" notation with "F". (i.e. For a ½” 150# flat face Slip-On. . . SF51) 3. The items marked "N/A" are not availabe per ASME B16.5.


Table 2Flanged Connections (Continued)

Weld-o-lets: Sock-o-lets: Thread-o-lets:

Size Rating Designation Size Rating Designation Size Rating Designation

1/2”3/4”1”

1-1/2”2”

SCH 40SCH 40SCH 40SCH 40SCH 40

W054W075W104W154W204

1/2”3/4”1”

1-1/2”2”

3000#3000#3000# 3000#3000#

S053S073S103S153S203

1/2”3/4”1”

1-1/2”2”

3000#3000#3000#3000#3000#

T053T073T103T153T203

1/2”3/4”1”

1-1/2”2”


W058W078W108W158W208

1/2”3/4”1”

1-1/2”2”

6000#6000#6000#6000#6000#

S056S076S106S156S206

1/2”3/4”1”

1-1/2”2”

6000#6000#6000#6000#6000#

T056T076T106T156T206

1/2”3/4”1”

1-1/2”2”


W051W071W101W151W201

Pipe Nipples: Plugs: Threaded Couplings: Socket Weld Couplings:

Female Threaded & Socket Weld

Connection Designation

Size Rating Desig-nation Size Rating Desig-

nation Size Rating Desig-nation Size Rating Desig-

nation SizeFNPT

Designa-tion

FSW Desig-nation

1/2”3/4”1”

1-1/2”2”


N054N074N104N154N204

1/2”3/4”1”

1-1/2”2”

3000#3000#3000# 3000#3000#

P053P073P103P153P203

1/2”3/4”1”

1-1/2”2”

3000#3000#3000# 3000#3000#

C053C073C103C153C203

1/2”3/4”1”

1-1/2”2”

3000#3000#3000# 3000#3000#

SC053SC073SC103SC153SC203

1/2”3/4”1”

1-1/2”2”

FN05FN07FN10FN15FN20

SW05SW07SW10SW15SW20

1/2”3/4”1”

1-1/2”2”


N058N078N108N158N208

1/2”3/4”1”

1-1/2”2”

6000#6000#6000#6000#6000#

P056P076P106P156P206

1/2”3/4”1”

1-1/2”2”

6000#6000#6000#6000#6000#

C056C076C106C156C206

1/2”3/4”1”

1-1/2”2”

6000#6000#6000#6000#6000#

SC056SC076SC106SC156SC206

1/2”3/4”1”

1-1/2”2”

SCH 160SCH 160SCH

N051N071N101N151N201

B1 D1 F G

C0 C0E C1 FE F0 F0E

F1 F3 F3E GE G0 G1

G3 G3E N0 N2 N2E N3

N3E X

NoConnection


/efg

/dTop

Side

Dimension

Dimension

ML

B

A

QUOTATION REQUEST:

Tel: (1) 225-673-6100 / 800-735-5835 Fax: (1) 225-673-2525 E-mail: [email protected]

Rep. Firm _______________________________________ Contact ________________________________________ Phone # ________________________________________ Fax # ___________________________________________ E-mail __________________________________________ Customer _______________________________________ Contact _________________________________________ Phone # ________________________________________ Fax # ___________________________________________ E-mail __________________________________________

Process Conditions:Qty ________________ EC Application for (circle one): Total Level Interface Level Operating Sp. Gravity ____________ Min. Sp. Gravity _______________Second Specific Gravity (Interface) _____________ Dielectric Constant ______________ Fluid(s) __________________________________________________________________ Operating Temp _________________ Max Temp __________ Operating Press __________ Max Press __________________

Chamber Details:Chamber Material __________________________________ Flange Material _______________________________________Top Connection Type ___________________ Size _________________________________ Rating _____________________Center to Center/Measuring Length ____________________________________Vent/Drain Type & Size _________________

Accessories:Furnish with (circle one) : AT100 MS50 KCAP400 MT5000 Other ___________Process Connection Type Size Rating ________________________

Note: When using Floats with a AT100 or MS50 in EC Chamber, there must be a minimum of 1” Clearance between the Float and the ID of the chamber being used.

Notes: 1. Extruded outlet connections can be utilized as follows:

Chamber Schedule Flange/Pipe Sizes COUPLING SIZES*Stainless Steel:*Stainless Steel:

10 1”, 1-1/2” & 2” 3/4”, 1”, 1 1/4”40 1-1/2” & 2” 1 1/4”

*Includes SS4 and SS6 material types. Welded or seamless chambers can be extruded.


B2 B5 B7 B9S B9W D2

D5 D7 D9S D9W T3 T4P

T5 T7 T9S & T9W WS W3 W5

W7 W9S W9W

/h

Bottom

ML

B

A

Dimension

Dimension

Additional Ordering Codes

Insulation:IH1 High Temperature Insulation, Float Chamber Only, 0.5 in. thick, max 250oF (121oC) IH1D High Temperature Insulation, Float Chamber & Top / Bottom Flanges, 0.5 in. thick, max 250oF (121oC)IH2 High Temperature Insulation, Float Chamber Only; 1.0 in. thick max. 500oF (260oC)IH2D High Temperature Insulation, Float Chamber &Top / Bottom Flanges; 1.0 in. thick max. 500oF (260oC)

IH3 High Temperature Insulation, Float Chamber Only, 2.0 in. thick, max 900oF (482oC)

IH3D High Temperature Insulation, Float Chamber &Top / Bottom Flanges; 2.0 in. thick max. 900oF (482oC)Valves:

VV Vent Valve (Specify valve manufacture and model)DV Drain Valve (Specify valve manufacture and model)

Code Stamps and CertificatesCSU ASME Code Stamp U*† (Per tag)CSM ASME Code Stamp UM*†(Per tag)CSS ASME Code Stamp S*†(Per tag)CRN Canadian Registration Number*†

CL General Certificate of ComplianceNote: The following services selected will not appear in the model # on engineering drawings or nameplates.

Engineering DocumentsGD1 Drawings for Approval - NOTE: Lead time will start after receipt of customer approved drawingsGD2 Drawings for RecordGD3 Certified as Built Drawings - NOTE: Lead time will start after receipt of Purchase OrderGD4 Weld Map (Per Tag)GD5 Inspection and Test Plan

Radiographic Services - Per TagCRA Radiographic Examination on all Pressure containing Butt Welds / and all other pressure containing welds are

Liquid Dye Penetrant Tested (Final Pass Only)CRB Radiographic Examination on all Pressure containing Butt Welds / and all other pressure containing welds are

Liquid Dye Penetrant Tested (Root and Final Pass) CRC 10% Radiographic Examination on Pressure containing Butt Welds / 10% of other pressure containing welds

are Liquid Dye Penetrant Tested (Final Pass Only)CRD 10% Radiographic Examination on Pressure containing Butt Welds / 10% of other pressure containing welds

are Liquid Dye Penetrant Tested (Root and Final Pass)CRE Radiographic Examination on all Pressure containing Welds (Final Pass Only) CRF Radiographic Examination on all Pressure containing Welds (Root and Final Pass)


Liquid Dye Penetrant - Per TagCNA Liquid Dye Penetrant Examination on all Pressure containing Welds (Final Pass Only) CNB Liquid Dye Penetrant Examination on all Pressure containing Welds (Root and Final Pass)CNC Liquid Dye Penetrant Examination on 10% of all Pressure containing Welds (Final Pass Only) CND Liquid Dye Penetrant Examination on 10% of all Pressure containing Welds (Root and Final Pass)

Positive Material IdentificationCHC Positive Material Identification with Carbon ContentCHD Positive Material Identification without Carbon Content

Hydrostatic ExaminationCP1 Hydrostatic Examination - (10 Minutes)CP2 Hydrostatic Examination with Chart Recording - (30 Minutes)CP3 Hydrostatic Examination with Chart Recording - (60 Minutes)CP4 Hydrostatic Examination with Chart Recording - (120 Minutes)CPZ Custom Hydrostatic Examination

Additional ServicesC2 Material Monitoring with Inspection Certificate 3.1 acc. EN 10204 (MTR)C3 Material Monitoring with Inspection Certificate 3.2 acc. EN 10204 (MTR)CH6 Ultrasonic Testing - Thickness TestingCHS Ultrasonic Testing - ShearwaveCH5 Magnetic Particle Inspection/TestingSTP Painting with standard ABB K-TEK paint (carbon steel non-wetted surfaces only)STS Special painting or surface treatment per customer specificationCH7 Post Weld Heat TreatmentCD1 ABB Standard Manufacturer‘s Data Records Indexed (all requested testing, drawings, C2‘s, etc) as a single

document and electronically transferred with no customer approvals requiredCDZ Special Manufacturer‘s Data Records, IndexedGW1 Equipment Weight DocumentionCHV Outside Hardness Testing (Outside Vendor)

Origin DocumentsGS1 Certificate of OriginGS2 Certificate of Origin Notarized by Local Chamber of CommerceGS3 Certificate of Origin Legalized by Specific Country Chamber of Commerce - Lead Time may be Extended

depending on CountryGS4 Korean Foreign Trade certificateGS5 NAFTA CertificateGS6 EX-IM BANK Certificate (One per Tag)GS7 Approved Material List*

CertificationsCK Certificate of compliance for ANSI / ASME*†

CPE Calibration Certificate of Hydrotest Equipment†

C7 Helium leak test on pressure bearing partsCHA Intergranular Corrosion Destructive TestCHB Corrosive TestCHF Certificate of Surface FinishCHP Certificate of PassivationCHE Charpy Test

NACECN1 NACE (MR 0103) Hardness Certificate* (May require CHV) Consult FactoryCN3 NACE (MR 0175 / ISO 15156) Hardness Certificate* (May require CHV) Consult Factory

Pressure Equipment DirectiveK6 Pressure Equipment Directive Certificate of Compliance (SEP)*†

K8 Pressure Equipment Directive Declaration of Conformity (Category I - IV)*†

*Requires C2 or C3 in Additional Services†Requires CP1, CP2, CP3, CP4 or CPZ in Hydrostatic Examination

Dat

a sh

eet

DS

/EC

-EN

Rev

. I_

02_2

015

Contact us

NoteWe reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreedparticulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.

We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents - in whole or in parts – is forbidden without prior written consent of ABB.

Copyright© 2015 ABBAll rights reserved

3KXL811001R4201

ABB Inc. 18321 Swamp RoadPrairieville, LA 70769 USAPhone: +1 225 673 6100Service: +1 225 677 5836Fax: +1 225 673 2525Service e-mail: [email protected]

www.abb.com/level