letter of transmittalperfcon.net/drawings/1296basalt/shop drawings/190801 1505... · 2019-08-01 ·...
TRANSCRIPT
Date: July 4, 2019
Daniel Kravcak, PMP | Project Manager | Performance Construction 604–628–9648 office | 604–999–7915 cell 1150–21331 Gordon Way, Richmond, BC V6W 1J9
From: Keith Bell LORE ELECTRIC INC Office: 604 940 4240 Email: [email protected] #8-7218 Progress Way Delta B.C V4G 1H2
Letter of Transmittal
The Basalt – In Suite fixtures and Common Corridors for approval Note the following changes:
Type AA changed to Grey and 3000K
Alternate Type BB added to cut sheets which was previously approved
Type EE custom colour “Umbra Grey” selection has been selected
Type G has been confirmed acceptable with Pennyfarthing
Type L has been revised as an alternate with a remote driver located in the electrical closets
Type SA revised and confirmed acceptable to Pennyfarthing
Type SC revised to be SMD6R in all laundry closets and an Alternate Galaxy L650900BN010A1 in all other SC locations, this has been confirmed acceptable to Pennyfarthing
Type SD and SK have been deleted as the millworker will be supplying and stalling a different fixture
SH revised as per ID request
SJ and SL – Satin Nickel trim added
Spec added for the LED tape light shown on the ID drawings around the mailboxes
The information contained in this drawing has been
reviewed and is:
ACCEPTABLE TO LORE ELECTRIC
NOT ACCEPTABLE TO LORE ELECTRIC
ACCEPTABLE AS NOTED
SUBJECT TO ACCEPTANCE BY DESIGN CONSULTANT
Supplier is responsible for providing acceptable products in
accordance with Specifications
Per: Keith Bell Date:
xx
7.4.2019
SUBMITTAL REVIEWReview is for general compliance with interior design contract documents. Sole responsibility for correctness of dimensions, details, quantities and safety during fabrica-tion and installation shall remain with the
contractor.
NO EXCEPTIONS TAKEN FURNISH WITH CHANGES NOTES AMEND AND RESUBMIT REJECTED
portico design group
By Christine Bauhaus on Jul 11, 2019
REVIEWED........................................(___)REVIEWED (MODIFIED)...................(___)REVISE AND RESUBMIT....................(___)NOT REVIEWED................................(___)
Reviewed only as to general conformity with thedesign concept and for general arrangement.The Consultant does not warrant or represent thatThe Consultant does not warrant or represent thatthe information contained on this shop drawing is either accurate or complete. Sole responsiblity for correct design, details and dimensions shall remain with the party submitting the drawing.
Durante Kreuk Ltd.
PER:_____________ DATE:______________
X DKL ONLY REVIEWED THE STEP LIGHT. NG DKL. 2019.07.29
PF MK Aug, 1.19: Reviewed as per comments below
SHIFT ARCHITECTURE INC.
SHOP DRAWING REVIEW
Reviewed
Reviewed as Noted
Revise and Resubmit
Not Reviewed
Project
Date
Reviewed By
This review by Shift Architecture Inc. is for the sole
purpose of ascertaining conformance with the
general design concept. This review shall not mean
that Shift Architecture Inc. approves the detailed
design inherent in the shop drawings, responsibility
for which shall remain with the Contractor
submitting same, and such review shall not relieve
the Contractor of the responsibility for errors or
omissions in the shop drawings or of the
responsibility of meeting all requirements of the
contract documents. The Contractor is responsible
for dimensions to be confirmed and correlated at the
job site, for information that pertains solely to
fabrication processes or to techniques of
construction and installation, and for the
coordination of the work of all trades.
✔
8/1/2019
1505
HK
REVISE & RESUBMITSC FIXTURE AS PERPENNYFARTHINGCOMMENTS
Project: Basalt
Type:
Location:
Fixture:
Lamping:
AA
Exterior Doors
Cooper Lighting - XTOR2B-Y
Cooper Lighting Page 1Grey Colour
Project: Basalt
Type:
Location:
Fixture:
Lamping:
AA
Cooper Lighting - XTOR2B-Y pg2
Cooper Lighting Page 2
Project: Basalt
Type:
Location:
Fixture:
Lamping:
BB
Galaxy Lighting - L223480BK-HSG
Galaxy Lighting Page 3
REVIEWED........................................(___)REVIEWED (MODIFIED)...................(___)REVISE AND RESUBMIT....................(___)NOT REVIEWED................................(___)
Reviewed only as to general conformity with thedesign concept and for general arrangement.The Consultant does not warrant or represent thatThe Consultant does not warrant or represent thatthe information contained on this shop drawing is either accurate or complete. Sole responsiblity for correct design, details and dimensions shall remain with the party submitting the drawing.
Durante Kreuk Ltd.
PER:_____________ DATE:______________
X
2019/07/29
Project: Basalt
Type:
Location:
Fixture:
Lamping:
BB
Galaxy Lighting - L223481BK0830
Galaxy Lighting Page 4
REVIEWED........................................(___)REVIEWED (MODIFIED)...................(___)REVISE AND RESUBMIT....................(___)NOT REVIEWED................................(___)
Reviewed only as to general conformity with thedesign concept and for general arrangement.The Consultant does not warrant or represent thatThe Consultant does not warrant or represent thatthe information contained on this shop drawing is either accurate or complete. Sole responsiblity for correct design, details and dimensions shall remain with the party submitting the drawing.
Durante Kreuk Ltd.
PER:_____________ DATE:______________
X
2019/07/29
Project: Basalt
Type:
Location:
Fixture:
Lamping:
DD
Lobby Ext entry
Kirlin - LRR-04006-1500L-120-
30K-MFL
Kirlin Page 5
Project: Basalt
Type:
Location:
Fixture:
Lamping:
DD
Kirlin - LRR-04006-1500L-120-
30K-MFL pg2
Kirlin Page 6
Project: Basalt
Type:
Location:
Fixture:
Lamping:
EE
Parkade Entrance
US Architectural Lighting - 8630-
16LED-WW-120-RAL7004-T
US Architectural Lighting Page 7
Project: Basalt
Type:
Location:
Fixture:
Lamping:
EE
US Architectural Lighting - 8630-
16LED-WW-120-RAL7004-T pg2
US Architectural Lighting Page 8
RAL-7022
Project: Basalt
Type:
Location:
Fixture:
Lamping:
E
Stairwell
MAC'S II Agencies - STR12-D-30-
LED-40-1-S-MSW
MAC'S II Agencies Page 9
Project: Basalt
Type:
Location:
Fixture:
Lamping:
E
MAC'S II Agencies - STR12-D-30-
LED-40-1-S-MSW pg.2
MAC'S II Agencies Page 10
Project: Basalt
Type:
Location:
Fixture:
Lamping:
E
MAC'S II Agencies - STR12-D-30-
LED-40-1-S-MSW pg.3
MAC'S II Agencies Page 11
Project: Basalt
Type:
Location:
Fixture:
Lamping:
G
Corridor
Halo - SMD6R6930WH
Halo Page 12
SUBMITTAL REVIEWReview is for general compliance with interior design contract documents. Sole responsibility for correctness of dimensions, details, quantities and safety during fabrica-tion and installation shall remain with the
contractor.
NO EXCEPTIONS TAKEN FURNISH WITH CHANGES NOTES AMEND AND RESUBMIT REJECTED
portico design group
By Christine Bauhaus on Jul 11, 2019
Project: Basalt
Type:
Location:
Fixture:
Lamping:
G
Halo - SMD6R6930WH pg.2
Halo Page 13
Project: Basalt
Type:
Location:
Fixture:
Lamping:
L
Suite Entry
DALS Lighting Inc. - 4001-SN
DALS Lighting Inc. Page 14
SUBMITTAL REVIEWReview is for general compliance with interior design contract documents. Sole responsibility for correctness of dimensions, details, quantities and safety during fabrica-tion and installation shall remain with the
contractor.
NO EXCEPTIONS TAKEN FURNISH WITH CHANGES NOTES AMEND AND RESUBMIT REJECTED
portico design group
By Christine Bauhaus on Jul 11, 2019
Project: Basalt
Type:
Location:
Fixture:
Lamping:
L
DALS Lighting Inc. -
BT12DIMLED-IC
DALS Lighting Inc. Page 15
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SB
Shower
Liteline - SLM4-30-WH
Liteline Page 19
& SA
& Thoughout
SUBMITTAL REVIEWReview is for general compliance with interior design contract documents. Sole responsibility for correctness of dimensions, details, quantities and safety during fabrica-tion and installation shall remain with the
contractor.
NO EXCEPTIONS TAKEN FURNISH WITH CHANGES NOTES AMEND AND RESUBMIT REJECTED
portico design group
By Christine Bauhaus on Jul 11, 2019
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SB
Liteline - P-4020
Liteline Page 20
& SA
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SC
Throughout
Halo - SMD6R12930WH
Halo Page 21
xxxxxxxxxx Laundry
in Laundry
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SC
Halo - SMD6R12930WH pg.2
Halo Page 22
Laundry room only
L650900BN010A1
12"D x 3-1/2"H
LED Flush Mount Ceiling Light - in Brushed Nickel finish with White Acrylic Lens
Specifications Model#: L650900BN010A1 UPC: 772775266805Finish: Brushed Nickel Location: DryGlass/Shade: White Acrylic Lens with Brushed
Nickel TrimsENERGY STAR: Yes
Fixture Material: Steel & Acrylic Lens Fluorescent: NoDimension: 12"D x 3-1/2"H Safety Listings: CSA or EquivalentLamping: 12W LED, Unit Gross Weight: 2.42 lbs.Color Temperature/CRI: 3000K / 80 Master Pack: 6Lamp Included: Included Master Gross Weight: 16.06 lbs.Dimming: Optional
Total Lumens: 1140 lumens Delivered Lumens: 912 lumensComments: For other color temperatures, dimming and voltage options, please consult factory.
Excel Lighting & Manufacturing13611 Maycrest Way, Richmond, BC Canada V6V 2J4 | Tel:604-278-8881 or 604-278-1919 | Fax:604-278-2551 | e-mail:[email protected]
55 East Beaver Creek Road, Unit A, Richmond Hill, ON Canada L4B 1E5 | Tel:905-889-8787 | Fax:905-763-8778 | e-mail:[email protected]
TYPE - SC Location - ALL SC locations other then the Laundry room Part Number - L650900BN010A1
original fixture was all fabric. There is no brushed nickel in the space. Plumbing and other lighting is Chrome - PDG
PF MK: Revise to L613532CH016A1 as discussed
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SF
Dining
Arlington Industries Inc - CP3540
Arlington Industries Inc Page 26
SUBMITTAL REVIEWReview is for general compliance with interior design contract documents. Sole responsibility for correctness of dimensions, details, quantities and safety during fabrica-tion and installation shall remain with the
contractor.
NO EXCEPTIONS TAKEN FURNISH WITH CHANGES NOTES AMEND AND RESUBMIT REJECTED
portico design group
By Christine Bauhaus on Jul 11, 2019
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SH
Vanity
Kuzco - WS8424-CH
Kuzco Page 27
SUBMITTAL REVIEWReview is for general compliance with interior design contract documents. Sole responsibility for correctness of dimensions, details, quantities and safety during fabrica-tion and installation shall remain with the
contractor.
NO EXCEPTIONS TAKEN FURNISH WITH CHANGES NOTES AMEND AND RESUBMIT REJECTED
portico design group
By Christine Bauhaus on Jul 11, 2019
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SJ
Exterior Deck
Halo - SMD6R12930WH
Halo Page 28
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SJ
Halo - SMD6R12930WH pg.2
Halo Page 29
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SJ
Halo - SMD6R12930WH pg.3
Halo Page 30
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SJ
Halo - SMD6R12930WH pg.4
Halo Page 31
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SL
Exterior Deck
Halo - SMD6R12930WH
Halo Page 32
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SL
Halo - SMD6R12930WH pg.2
Halo Page 33
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SL
Halo - SMD6R12930WH pg.3
Halo Page 34
Project: Basalt
Type:
Location:
Fixture:
Lamping:
SL
Halo - SMD6R12930WH pg.4
Halo Page 35
Conforms to ANSI/UL Standard 2108Certified to CAN/CSA Standard C22.2 No. 250.0
ULLISTED
C USR
24O
PRODUCT FEATURES• 90+ CRI
• Dimmable
• 50,000 hour life
• 5-year warranty
• UL-listed for indoor and outdoor use
• 3M™ industrial adhesive backing
• For use with 24V power supplies
TOTAL WATTAGE USED AT EACH LENGTH1ft 2ft 3ft 4ft 5ft 6ft 7ft 8ft 9ft 10ft 11ft 12ft 13ft 14ft 15ft2.1 5.2 8.2 9.6 12.4 14.4 17.2 18.7 21.6 23 25.8 26.9 29.7 31.5 33.8
16ft 17ft 18ft 19ft 20ft 21ft 22ft 23ft 24ft 25ft 26ft 27ft 28ft 29ft 30ft35.1 37.1 38 40.7 41.9 43.9 46.6 47.7 49.9 50.7 52.4 54.2 55.6 57.5 57.8
SPECIFICATIONS
Series PL - Performance 200 (Outdoor)
Input Voltage 24V DC / Constant Voltage
Watts per Foot 1.9W/ft @ Maximum Run Length
Max Run Length Unlimited, power every 30ft
Production Intervals 2-5/8" (66.7mm)
End Cap Dimensions 1/2" (12.2mm) x 3/8" (9mm)
Tape Dimensions 7/16" (11.2mm) x 1/4"(6mm)
CRI 90+
Diode Epistar 2835
Dimming Options PWM, Triac, 0-10V, DMX, Hi-lume
Temp Range -40°F (-40°C) to 149°F (65°C)
Beam Spread 120°
PL27K-WR-24V
2700K148 lm/ft
IP67
PL3K-WR-24V
3000K169 lm/ft
IP67
PL35K-WR-24V
3500K176 lm/ft
IP67
PL41K-WR-24V
4100K184 lm/ft
IP67
PL5K-WR-24V
5000K195 lm/ft
IP67
KELVIN COLOR TEMPERATURE SCALE
2,00
0K
2,40
0K
2,70
0K
5,00
0K
6,00
0K
3,00
0K
3,50
0K
4,10
0K
Cut Intervals: 66.7mm (2-5/8")
151
+
_DC24V
++
__DC24V
151DC24V
++
__DC24V
131
131
131
131
Kelvin Lumens Rating
MODEL:
Questions/Support | 800-789-3810 | [email protected] 042219DM
Fixture Type:
Project:
Location:
Width: 11.2mm(12.2mm end cap)
Depth: 6mm(9 mm endcap)
PL-SERIES | RUBBER COATED | LINEAR LED LIGHTING
PERFORMANCE 200 (OUTDOOR)
TITLE 24JA8-2016
Supports
Compliance
092818DMQuestions/Support | 800-789-3810 | [email protected]
Fixture Type:
Project:
Location:
ULV3636 WATT —24 VOLT | CLASS 2 SUPPLY
SPECIFICATIONSModel ULV36
Input Voltage 100 – 277 VAC
Output Voltage 24 VDC / Constant Voltage
Max. Wattage 36 W
Temp Range -20 °F – 158 °F
Dimensions W × H × D 4-1/2" × 2-5/16" × 1-3/8"
Classification Class 2
PRODUCT FEATURES
• 431 Hz / Flicker-free Dimming Down to 5%
• Incandescent, ELV, MLV, or 0-10 V Dimming
• Protections: Short Circuit / Over Current / Over Voltage
• Free Air Convection Cooling
• Suitable for Dry / Damp Location
• UL-Listed Class 2
Conforms to ANSI/UL Standard 2108
Certified tp CAN/CSA Standard C22.2 No. 250.0
CLASS2
1-3/8"
2-5/16"
4-1/2"
7/8"
3-1/16"1-5/8"
Mailbox ID tape Light
BASALT
Mailbox ID tape light
092818DMQuestions/Support | 800-789-3810 | [email protected]
ULV3636 WATT —24 VOLT | CLASS 2 SUPPLY
SPECIFICATION Parameters Symbols Test Conditions / Comment Min Typ Max Units
INPUTInput Voltage VIN 108 305 VAC
Rated Input Voltage VIN RATEDPhase Cut Dimming 120 VAC
No Phase Cut Dimming 120 277 VACInput Frequency fline 47 50 / 60 63 Hz
Input Current IIN
Full Load,VIN = 120 VAC 0.40 AFull Load,VIN = 230 VAC 0.20 AFull Load,VIN = 277 VAC 0.18 A
GENERAL CHARACTERISTICS
Power Factor PF30% – 100% Load, VIN = 120 VAC 0.95 PF50% – 100% Load, VIN = 230 VAC 0.9 PF70% – 100% Load, VIN = 277 VAC 0.9 PF
Total Harmonic Distortion THD
30% – 100% Load, VIN = 120 VAC 20 %50% – 100% Load, VIN = 230 VAC 20 %
70% – 100% Load, VIN = 277 VAC 20 %
Efficiency ηFull Load, VIN = 120 VAC 82 83 %Full Load, VIN = 230 VAC 83 83.5 %Full Load, VIN = 277 VAC 83 83.5 %
Turn On Delay Time Ton_delay Cold Start, No Dimmer 0.3 0.5 S
Leakage Current ILeakage VIN = 277 VAC / 60Hz 0.5 mAOUTPUT
Output Voltage VOUT No Dimming 22.8 24 24.7 VOutput Current IOUT 0 1500 mALine Regulation IOUT-LINE 1 %Load Regulation IOUT-LOAD 1 %Ripple Voltage IOUT-RIPPLE Full Load, (pk-to-pk) / (2 × Average) 10 %Output Voltage
Overshoot IOVERSHOOT Power ON 5 %
0-10V OR RESISTOR DIMMINGThe 0-10 V or resistor dimming is a dimming manner that can be used to dim the output voltage via a standard commercial wall dimmer (0-10 VDC) or an external control voltage source (0-10 VDC) or external resistor.
The dimming range is 100 % VOUT to 5 % VOUT. When VDIM is 8-10 VDC, the output voltage maintains 100% VOUT, and when VDIM is below 0.6 V, the output voltage is 5% VOUT.Absolute Maximum
Voltage on 0-10 V Pin
VDIM -2 15 V
Source Current on 0-10 V
Dimming PinIDIM 100 uA
VDIM Voltage for Full Bright VDIM-MAX 8 V
Output Duty Cycle D0-10V PWM Output 5 100 %
MODEL LIST Model Name Rated Input Voltage Rated Output Power Rated Output Voltage Output Current Note
ULV36120–277 VAC
36 W 24 VDC 0-1500 mA × 2120 VAC (Phase Cut Dimming)
Mailbox ID drawing Tape light
092818DMQuestions/Support | 800-789-3810 | [email protected]
SPECIFICATION (CONT.) Parameters Symbols Test Conditions / Comment Min Typ Max Units
PWM DIMMINGThe PWM dimming is a dimming manner that can be used to dim the output voltage via the duty cycle of PWM signal.
The dimming range is 100 % VOUT to 5 % VOUT. When the duty cycle is 80 % to 100 %, the output voltage reaches 100 % VOUT, and the output voltage maintains 5 % VOUT when the duty cycle below 6 %.
PWM Frequency fPWM 0.1 1 KHzHigh Level Voltage
of PWM Signal VPWM-High 8 10 12 V
Lower Level Voltage of
PWM SignalVPWM-Low 0 1 V
Output Duty Cycle DPWM PWM Output 5 100 %TRIAC DIMMINGThe unit is compatible with leading-edge and trailing-edge dimmer.
Input Voltage VIN-TRIAC DIM 120 VACOutput Duty Cycle DTRIAC PWM Output 0 - 100 %
Suggest Load Range PSuggest VIN = 120 VAC 5 36 W
PROTECTIONOver Voltage Protection VOVP Latch Off Mode 30 V
Over Temperature Protection TOTP
If the case temperature exceeds OTP point, the output voltage of the driver is
automatically reduced.100 105 110 ℃
Short Circuit Protection It will recover automatically after fault conditions is removed.
ENVIRONMENTStorage
Temperature TStorage Humidity: 5 % RH to 95 % RH -40 - +85 ℃
Operating Relative Humidity Ha Non Condensing 10 90 %
OTHERSLife Time TLife Full Load, 120 VAC Input, 50 ℃
Case Temperature50 kHrs
MTBF TMTBF 200 kHrsDimension L × W × H 68 mm × 40 mm × 26 mm (2.68" × 1.57" × 1.02")
SAFETY COMPLIANCEUL Listed UL8750 Compliance to UL1310 Class 2, CSA-C22.2 No. 107.1
EMC COMPLIANCEFCC Part 15B Conducted Emission Test and Radiated Emission Test
Note: Unless otherwise specified, all the above parameters are measured at ambient temperature of 25 ℃ and VIN = 100 – 277 VAC.
ULV3636 WATT —24 VOLT | CLASS 2 SUPPLY
Mailbox ID Drawing Tape light
092818DMQuestions/Support | 800-789-3810 | [email protected]
TYPICAL APPLICATIONPRIMARY SIDE DIMMING (120V ONLY)
SECONDARY SIDE DIMMING (120–277V)
SECONDARY SIDE DIMMING (0–10V)
SECONDARY SIDE DIMMING (DMX)
DIM + (VLT)DIM - (GRY)
OUTPUT
LED - (RED)
LED + (BLU)
INPUT
ACL (BLK)
ACL (WHI)
VIOLET (DIM+)
GRAY (DIM+)
DIM + (VLT)DIM - (GRY)
OUTPUT
LED - (RED)
LED + (BLU)
INPUT
ACL (BLK)
ACL (WHI)
VIOLET (DIM+)
GRAY (DIM+)
DIM + (VLT)DIM - (GRY)
OUTPUT
LED - (RED)
LED + (BLU)
INPUT
ACL (BLK)
ACL (WHI)
VIOLET (DIM+)
GRAY (DIM+)
DIM + (VLT)DIM - (GRY)
OUTPUT
LED - (RED)
LED + (BLU)
INPUT
ACL (BLK)
ACL (WHI)
VIOLET (DIM+)
GRAY (DIM+)
ULV3636 WATT —24 VOLT | CLASS 2 SUPPLY