legible sydney design manual (appendix 1)

00A-00

Legend

LEGEND

GENERAL NOTES

LEGIBLE SYDNEY - WAYFINDING SIGNAGE

PYLON AND TAXI RANK PYLON CONSTRUCTION DRAWINGS

- DO NOT SCALE DRAWINGS.

- ALL GALVANISING TO BE MINIMUM 500 g/m

- EXISTING 900 x 900 x 600mm DEEP CONCRETE FOOTINGS MAY BE REUSED IN SUITABLE LOCATIONS.

SIGN TO BE LOCATED CENTRALLY ON THESE FOOTINGS AND THE CHEMICAL ANCHORS MUST NOT CLASH

WITH EXISTING FIXINGS. EXISTING FIXINGS TO BE CUT OFF FLUSH.

- PAVEMENT SURFACES AND CONDITIONS WILL VARY. REFER TO ’’CITY OF SYDNEY - STREETS DESIGN

TECHNICAL SPECIFICATIONS’’ (SECTION C) FOR FURTHER DETAILS. A MINIMUM 15MM SKIRTING HEIGHT

FROM FFL IS TO BE MAINTAINED, MAXIMUM SKIRTING HEIGHT TO BE 50MM.

- ALL PYLON SIGNS TO BE INSTALLED PLUMB AND NOT FOLLOW ANY SLOPING GROUND CONDITIONS.

- ALL PANELS TO BE FLUSH WHEN INSTALLED AND SET BACK FROM THE EXTERNAL FRAME OUTER EDGE

BY 1 -2MM.

- THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH THE "LEGIBLE SYDNEY DESIGN MANUAL".

A - EXTERNAL FRAME:

90 X 6MM 316 GRADE STAINLESS STEEL FLAT BARS. NON-DIRECTIONAL LINISH ON SIDES AND MIRROR

POLISH ON EDGES. MITRED CORNERS AS PER DETAIL 7.

SMOOTH ALL OUTER ARISSED EDGES.

FIXED TO INTERNAL STRUCTURAL FRAME IN 4 PARTS (TOP, BOTTOM AND 2 SIDES) VIA M6 STAINLESS

STEEL STUD FIXINGS AT 500MM CTRS (G) AND AS SHOWN ON DRAWINGS. STUD FIXINGS WELDED TO

EXTERNAL FRAME, USE PACKERS WHERE REQUIRED.

TAXI RANK VERSION TO HAVE REMOVABLE TOP COUNTER SUNK SCREW FIXED TO ALUMINUIM BOX

FRAME (L).

B - INTERNAL STRUCTURAL FRAME:

65 X 65 X 4MM MILD STEEL RHS WELDED FRAME. 3MM CFW AND HOT DIPPED GALVANISED. ALL BELOW

GROUND STEELWORK TO BE WRAPPED IN BITUMINOUS TAPE OR TWO COATS OF BITUMINOUS PAINT.

C - WAYFINDING GRAPHIC SIGNAGE PANELS 1,2,4 AND 5:

2MM ALUMINIUM PLATES FIXED TO BACKING PLATE WITH MAGNETIC TAPE (REFER TO DETAIL 8).

GRAPHIC APPLICATION TO BE SPECIFIED BY COUNCIL.

PANEL SIZES:

PANEL 1 - 425MM WIDTH X 1011MM HEIGHT




C1 - BRAILLE/TACTILE SIGNAGE PANEL 3:

1.5MM ACRYLIC, FIXED TO BACKING PLATE WITH DOUBLE SIDED TAPE, DETAILED SPECIFICATION TO BE

SUPPLIED BY COUNCIL.


C2 - TAXI PYLON GRAPHIC SIGNAGE PANELS 2, 3 & 5:

2MM ALUMINIUM PLATES FIXED TO BACKING PLATE WITH MAGNETIC TAPE (REFER TO DETAIL 8). GRAPHIC

APPLICATION TO BE SPECIFIED BY COUNCIL.

PANEL SIZES:




C3 - ILLUMINATED TAXI PANEL:

4.5MM HI IMPACT OPAL ACRYLIC PANEL TO SLIDE FROM TOP INTO ALUMINUIN CHANNEL (L) VIA 18 X 12MM

CLEAR ACYLIC TAB CHANNELS ON ALL INSIDE EDGES. FACE APPLIED TRANSPARENT VINYL GRAPHICS TO

SPECIFICATION SUPPLIED BY COUNCIL.


D - BACKING PLATES:

3MM GALVANISED STEEL PLATES COUNTERSUNK SCREW FIXED TO INTERNAL STRUCTURAL FRAME (B)

WITH M5 STAINLESS SCREWS AT 200MM CTRS.

10MM PAINTED BORDERS WITH BLACK EXTERNAL GRADE METAL PAINT, COLOUR TO BE APPROVED.

E - SKIRTING PLATE:

3MM THICK 316 GRADE STAINLESS STEEL PLATE TO BE COUNTERSUNK SCREW FIXED WITH M6

STAINLESS SCREWS TO THE INTERNAL STRUCTURAL FRAME (B) AT POINTS BELOW MAXIMUM GROUND

LEVEL (50MM) AS SHWON ON SECTIONAL DETAIL 10. NON-DIRECTIONAL LINISH FINISH.

F - BASE PLATE:

16MM THICK MILD STEEL 3MM CFW TO FRAME (B).

HOT DIP GALVANISED AND PAINTED IN TWO COATS OF BITUMINOUS PAINT. EPOXY FIXED VIA 4 x M16 HILTI

HIT-V GALVANISED ANCHOR BOLTS EMBEDDED 300MM.

G - M6 STAINLESS STEEL STUD FIXINGS @ 500MM CTRS

H - GROUT TO BASE PLATE - ALLOW 20MM

I- CONCRETE FOOTING:

1000 X 1000 X 500MM, CONCRETE STRENGTH TO BE MINIMUM 25 MPc. CONTAINING SL72 MESH TOP AND

BOTTOM WITH TYPICAL 50MM COVER.

J- 10MM THICK EXPANSION JOINTING FOAM AND APPROVED SEALANT ON FOAM BAKING ROD AROUND

BASE OF SIGN BELOW GROUND LEVEL.

K- 6MM GALVANISED STEEL CAP PLATE FLUSH WITH STRUCTURAL FRAME (B).

L- ACRYLIC PANEL FRAME

60 X 60 X 3 ALUMINUIM CHANNEL MODIFIED TO 60 X 9 X 3 CHANNEL TO CREATE BOX FRAME. BOTTOM

AND SIDES WELDED, TOP SECTION COUNTERSUNK SCREW FIXED VIA 50 X 50 X 3MM THICK ALUMINUIM

CORNER SUPPORTS (M). BOX FRAME ASSEMBLY COUNTERSUNK SCREW FIXIED TO INTERNAL

STRUCTURAL FRAME (B).

M- 50 X 50 X 3MM THICK ALUMINUIM CORNER ANGLE TO SUPPPORT REMOVABLE TOP.

N- LED MODULES TO COUNCIL SPECIFICATION.

ARCHITECTURE URBAN DESIGNTzannes Associates

SCALE DRAWN

Jan 2015 11031

63 Myrtle Street

Chippendale NSW 2008

Sydney Australia

T +61 2 9319 3744

F +61 2 9698 1170

[email protected]

REVISIONPROJECT DRAWINGDATE

As noted @ A3 CH/BC

City of Sydney Wayfinding

Signage and Taxi Rank Pylon

FOR CONSTRUCTION

Panel 1

Panel 2

Panel 3

Panel 4

Panel 5

GROUND LEVEL

01 02

03

00A-01

04

VA

RIE

S

15

MM

MIN

50

MM

MA

X

90

FRONT ELEVATION

SCALE 1:10

PLAN

SCALE 1:10

SIDE ELEVATION

SCALE 1:10

A

C

E

A

C

C

C

C1

440

A-02

07

A-03

05

A-02

06

A-03

07

A-03

Wayfinding Pylon - Plan & Elev


SCALE DRAWN

Jan 2015 11031

63 Myrtle Street


Sydney Australia

T +61 2 9319 3744

F +61 2 9698 1170

[email protected]


As noted @ A3 CH/BC



FOR CONSTRUCTION

04

00A-02

SCALE 1:10

CONCRETE FOOTING

GROUND LEVEL

SECTION

A

B

C

I 500

30MM THICK MORTAR BED MAXIMUM

PAVING SURFACE

1000 1000

COMPACTED SUB-BASE TO 100 kPa ALLOWABLE BEARING PRESSURE COMPACTED SUB-BASE TO 100 kPa ALLOWABLE BEARING PRESSURE

CONCRETE FOOTING

I

J

G

B

A

K

EQ 215 EQ

EX

TE

RN

AL

FR

AM

E I

NS

IDE

ED

GE

26

90

05SCALE 1:10

SECTION

VA

RY

ING

PA

VIN

G S

UR

FA

CE

S A

ND

160 G

RO

UN

D C

ON

DIT

ION

S -

SE

E N

OT

ES

08

A-03

10

A-04 66

Wayfinding Pylon - Sections


SCALE DRAWN

Jan 2015 11031

63 Myrtle Street


Sydney Australia

T +61 2 9319 3744

F +61 2 9698 1170

[email protected]


As noted @ A3 CH/BC



FOR CONSTRUCTION

09

Panel 1

Panel 5

07

00

Details

A-03

PLAN DETAIL

SCALE 1:1

ELEVATIONAL DETAIL

SCALE 1:2

VA

RIE

S 1

5M

M M

IN 5

0M

M M

AX

PACKERS TO SUIT

06SCALE 1:5

PLAN DETAIL

550

30

30

250

BASE PLATE (F)

A

C

C

A

E

G

DC

A

B

COUNTER SUNK

SCREW FIXING

1.6MM MAGNETIC

TAPE (90% COVERAGE)

90

440

EQ EXTERNAL FRAME INSIDE EDGE 428 EQ

EQ REMOVABLE SIGNAGE PANEL 425 EQ

1 -

2 M

ME

Q65

EQ

1 -

2 M

M

6 1

09

A-03

08SCALE 1:1

SECTION DETAIL

B

D

C

G

A

1.6MM MAGNETIC TAPE

PACKER TO SUIT

90

1 - 2 MM EQ 65 EQ 1 - 2 MM

COUNTER SUNK SCREW

FIXING


SCALE DRAWN

Jan 2015 11031

63 Myrtle Street


Sydney Australia

T +61 2 9319 3744

F +61 2 9698 1170

[email protected]


As noted @ A3 CH/BC



FOR CONSTRUCTION

10SCALE 1:1

SECTION DETAIL

00

Details

A-04

A

D

C

B

J

F

H

COUNTER SUNK SCREW FIXING

1.6MM MAGNETIC TAPE

(90% COVERAGE)


G

1 - 2 MM1 - 2 MM

90

23465432

E

EQ

60

EQ

MIN

15

TO

MA

X 5

0


SCALE DRAWN

Jan 2015 11031

63 Myrtle Street


Sydney Australia

T +61 2 9319 3744

F +61 2 9698 1170

[email protected]


As noted @ A3 CH/BC



FOR CONSTRUCTION

Panel 1

Panel 2

Panel 3

Panel 4

GROUND LEVEL

11 12

00A-05

90

FRONT ELEVATION

SCALE 1:10

SIDE ELEVATION

SCALE 1:10

A

C2

E

A

C2

C2

C3

440

15

A-06

14

A-06

17

A-07

VA

RIE

S

15

MM

MIN

50

MM

MA

X

13PLAN

SCALE 1:10 Taxi Rank Sign - Plan & Elev

16

A-07


SCALE DRAWN

Jan 2015 11031

63 Myrtle Street


Sydney Australia

T +61 2 9319 3744

F +61 2 9698 1170

[email protected]


As noted @ A3 CH/BC



FOR CONSTRUCTION

14

00A-06

SCALE 1:10

CONCRETE FOOTING

GROUND LEVEL

SECTION

A

B

C

I 500

30MM THICK MORTAR BED MAXIMUM

PAVING SURFACE

1000 1000

COMPACTED SUB-BASE TO 100 kPa ALLOWABLE BEARING PRESSURE COMPACTED SUB-BASE TO 100 kPa ALLOWABLE BEARING PRESSURE

CONCRETE FOOTING

I

J

G

B

A

K

EX

TE

RN

AL

FR

AM

E I

NS

IDE

ED

GE

26

90

15SCALE 1:10

SECTION

VA

RY

ING

PA

VIN

G S

UR

FA

CE

S A

ND

160 G

RO

UN

D C

ON

DIT

ION

S -

SE

E N

OT

ES

10

A-04

19

A-08

Taxi Rank Sign - Sections

66


SCALE DRAWN

Jan 2015 11031

63 Myrtle Street


Sydney Australia

T +61 2 9319 3744

F +61 2 9698 1170

[email protected]


As noted @ A3 CH/BC



FOR CONSTRUCTION

00A-07

16SCALE 1:5

PLAN DETAIL

550

30

30

250

BASE PLATE (F)

425 (REMOVABLE SIGNAGE PANEL)

EXTERNAL FRAME INSIDE EDGE 427

30MM DIA HOLE FOR

POWER RETICULATION

17SCALE 1:5

PLAN DETAIL

EXTERNAL FRAME INSIDE EDGE 427

425 (ACRYLIC PANEL)

30MM DIA HOLE FOR

POWER RETICULATION

18PLAN DETAIL

SCALE 1:1

90

1 -

2 M

M1

- 2

MM

A

C1

L

09

A-03

18

A-07

Taxi Rank Sign - Details


SCALE DRAWN

Jan 2015 11031

63 Myrtle Street


Sydney Australia

T +61 2 9319 3744

F +61 2 9698 1170

[email protected]


As noted @ A3 CH/BC



FOR CONSTRUCTION

19

00A-08

SCALE 1:1

SECTION DETAIL

M

D

C1

G

A


1.6MM MAGNETIC TAPE

PACKER TO SUIT

L

N

C

L

B

Taxi Rank Sign - Details

90

1 - 2 MM EQ 65 EQ 1 - 2 MM


SCALE DRAWN

Jan 2015 11031

63 Myrtle Street


Sydney Australia

T +61 2 9319 3744

F +61 2 9698 1170

[email protected]


As noted @ A3 CH/BC



FOR CONSTRUCTION

legible sydney design manual (appendix 1)

Documents