leather plastic polish
TRANSCRIPT
-
8/10/2019 Leather Plastic Polish
1/1
HOME CARE FORMULATIO
Leather/Plastic Polish H-AC-00
CarbopolEZ-2 polymer provides suspension of insoluble ingredients and stabilization of oils in this leather and plastic polish formula
These properties improve the overall stability and shelf life of the product.
Chemical Name, Trade Name Weight % Function
A 1. Deionized Water 19.50 Diluent
2. CarbopolEZ-2 Polymer
(1) 0.40 Rheology Modifier
B 3. Deionized Water 50.00 Diluent
4. Renex 20(2)
2.00 Solvent
5. Morpholine 1.00 Neutralizer
C 6. Silicone Fluid (350 cSt), SF96(3)
5.00 Gloss / Shine
7. Oleic Acid 2.00 Emulsifier
8. Mineral Spirits,Isopar M(4)
20.00 Solvent
9. KathonCG/ICP
(5) 0.10 Preservative
Procedure:
1. Prepare Part A. In a separate vessel, sprinkle theCarbopolEZ-2 polymer
onto surface of the water. Allow the polymer to self wet (about 10 minutes)until no polymer is visible on the surface.
2. Prepare Part B. Dissolve the Renex 20 and morpholine in the water withmild agitation.
3. Prepare Part C. Dissolve the silicone fluid and the oleic acid into the mineralspirits.
4. Add Part C to Part B with good agitation.
5. Add Part A. Mix until homogenous.
Carbopolis a registered trademark of The Lubrizol Corporation.
Renex is a trademark of Uniqema.
SF96
is a registered trademark of GE Silicones.Isopar is a trademark of Exxon Mobil Corporation.Kathon is a trademark of The Dow Chemical Company.
Typical Product Properties:
Appearance: Opaque
pH: 8.0 - 8.5
Viscosity (mPas)*: 2,900 - 3,500
Stability: Pass 4 weeks @ 45CPass 1 freeze/thaw cycle
*Brookfield RVT @ 20 rpm, 25C
Supplier References:
(1) Lubrizol Advanced Materials, Inc.
(2) Uniqema
(3) GE Silicones
(4) Exxon Mobil Corporation
(5) The Dow Chemical Company
Comment:Due to the level of mineral spirits in this formulation, recommended that customers review the environmental
regulatory requirements of the states and countries whthey wish to market this type of product to be certain tare in compliance with the local VOC regulations.
H-AC-00
Edition: July 20
Previous Editions: June 2006 / July 20Original Edition: August 1998 (HIT-54
Lubrizol Advanced Materials, Inc. / 9911 Brecksvil le Road, Cleveland , Ohio 44141-3247 / TEL: 800.379.5389 or 216.447.5000
The information contained herein is being furnishedfor informational purposes only, upon the express conditionthat the User makes its own assessment of the appropriateuse of such information. While the information containedherein is believed to be reliable, no representations,guarantees or warranties of any kind are made as to itsaccuracy, suitability for a particular application or theresults to be obtained herefrom. Lubrizol AdvancedMaterials, Inc. ("Lubrizol") cannot guarantee how anyproducts associated with this information will perform in
combinationwithother substances or in the Users process.Due to variations in methods, conditions and equipmentused commercially in processing these materials, nowarranties or guarantees are made as to the suitability ofthe information or products for the applicationsdisclosed. Lubrizol shall not be liable and the Userassumes all risk and responsibility for any use orhandling of any material beyond Lubrizol's directcontrol. LUBRIZOL MAKES NO WARRANTIES, EXPRESSOR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABOR FITNESS FOR A PARTICULAR PURPOSE. It iUsers sole responsibility to determine if there areissues relating to patent infringement of any componecombination of components relating to the supinformation. Nothing contained herein is to considered as permission, recommendation, noan inducement to practice any patented invenwithout permissio n of the patent owner.
For further information, please visit: www.lubrizol.com/homecare
ubrizol Advanced Materials, Inc. is a wholly owned subsidiary of The Lubrizol Corporation
Copyright 2013/The Lubrizol Corporation
http://www.lubrizol.com/homecarehttp://www.lubrizol.com/homecarehttp://www.lubrizol.com/homecarehttp://www.lubrizol.com/homecare