ISO Handbooks Paints and Varnishes LD3015, LD3016. LD3017, LD3018

Volume 1: General test methods - Part 1 Year of publication: 2002 TQC art. nr LD3015 Contents ISO 527-1:1993 Plastics — Determination of tensile properties — Part 1: General principles ISO 527-1:1993 / Cor. 1:1994 Technical Corrigendum 1:1994 to ISO 527-1:1993 ISO 527-3:1995 Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets ISO 527-3:1995 /Cor. 1:1998 Technical Corrigendum 1:1998 to ISO 527-3:1995 ISO 527-3:1995 /Cor. 2:2001 Technical Corrigendum 2:2001 to ISO 527-3:1995 ISO 1513:1992 Paints and varnishes — Examination and preparation of samples for testing ISO 1513:1992 /Cor. 1:1994 Technical Corrigendum 1:1994 to ISO 1513:1992 ISO 1514:1993 Paints and varnishes — Standard panels for testing ISO 1516:1981 Paints, varnishes, petroleum and related products — Flash/no flash test —Closed cup equilibrium method ISO 1517:1973 Paints and varnishes — Surface-drying test — Ballotini method ISO 1518:1992 Paints and varnishes — Scratch test ISO 1519:1973 Paints and varnishes — Bend test (cylindrical mandrel) ISO 1520:1999 Paints and varnishes — Cupping test ISO 1522:1998 Paints and varnishes — Pendulum damping test ISO 1522:1998 /Cor. 1:1998 Technical Corrigendum 1:1998 to ISO 1522:1998 ISO 1523:1983 Paints, varnishes, petroleum and related products — Determination offlashpoint — Closed cup equilibrium method ISO 1524:2000 Paints, varnishes and printing inks — Determination of fineness of grind ISO 2409:1992 Paints and varnishes — Cross-cut test ISO 2431:1993 Paints and varnishes — Determination of flow time by use of flow cups ISO 2431:1993 / Cor. 1:1994 Technical Corrigendum 1:1994 to ISO 2431:1993 Paints and varnishes, Ed. 3, Vol. 1 Page 2 of 4 ISO 2431:1993 / Cor. 2:1999 Technical Corrigendum 2:1999 to ISO 2431:1993 ISO 2808:1997 Paints and varnishes — Determination of film thickness ISO 2810:1974 Paints and varnishes — Notes for guidance on the conduct of natural weathering tests ISO 2811-1:1997 Paints and varnishes — Determination of density — Part 1: Pyknometer method ISO 2811-2:1997 Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method ISO 2811-3:1997 Paints and varnishes — Determination of density — Part 3: Oscillation method ISO 2811-4:1997 Paints and varnishes — Determination of density — Part 4: Pressure cup method ISO 2812-1:1993 Paints and varnishes — Determination of resistance to liquids — Part 1: General methods ISO 2812-2:1993 Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method ISO 2813:1994 Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees ISO 2813:1994 / Cor. 1:1997 Technical Corrigendum 1:1997 to ISO 2813:1994 ISO 2814:1973 Paints and varnishes — Comparison of contrast ratio (hiding power) of paints of the same type and colour ISO 2815:1973 Paints and varnishes — Buchholz indentation test ISO 2884-1:1999 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at

a high rate of shear ISO 3231:1993 Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide ISO 3233:1998 Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the density of a dried coating ISO 3233:1998 /Cor. 1:1999 Technical Corrigendum 1:1999 to ISO 3233:1998 ISO 3248:1998 Paints and varnishes — Determination of the effect of heat ISO 3251:1993 Paints and varnishes — Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes ISO 3270:1984 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing ISO 3668:1998 Paints and varnishes — Visual comparison of the colour of paints ISO 3678:1976 Paints and varnishes — Print-free test Paints and varnishes, Ed. 3, Vol. 1 Page 3 of 4 ISO 3679:1983 Paints, varnishes, petroleum and related products — Determination of flashpoint — Rapid equilibrium method ISO 3680:1983 Paints, varnishes, petroleum and related products — Flash/no flash test — Rapid equilibrium method

ISO 3856-1:1984 Paints and varnishes — Determination of "soluble" metal content — Part 1: Determination of lead content — Flame atomic

absorption spectrometric method and dithizone spectrophotometric method ISO 3856-2:1984 Paints and varnishes — Determination of "soluble" metal content — Part 2: Determination of antimony content — Flame

atomic absorption spectrometric method and Rhodamine B spectrophotometric method ISO 3856-3:1984 Paints and varnishes — Determination of "soluble" metal content — Part 3: Determination of barium content — Flame atomic

emission spectrometric method ISO 3856-4:1984 Paints and varnishes — Determination of "soluble" metal content — Part 4: Determination of cadmium content — Flame

atomic absorption spectrometric method and polarographic method ISO 3856-5:1984 Paints and varnishes — Determination of "soluble" metal content — Part 5: Determination of hexavalent chromium content of

the pigment portion of the liquid paint or the paint in powder form — Diphenylcarbazide spectrophotometric method ISO 3856-6:1984 Paints and varnishes — Determination of "soluble" metal content — Part 6: Determination of total chromium content of the

liquid portion of the paint — Flame atomic absorption spectrometric method ISO 3856-7:1984 Paints and varnishes — Determination of "soluble" metal content — Part 7: Determination of mercury content of the pigment

portion of the paint and of the liquid portion of water-dilutable paints — Flameless atomic absorption spectrometric method ISO 4617:2000 Paints and varnishes — List of equivalent terms ISO 4618-1:1998 Paints and varnishes — Terms and definitions for coating materials — Part 1: General terms ISO 4618-2:1999 Paints and varnishes — Terms and definitions for coating materials — Part 2: Special terms relating to paint characteristics

and properties ISO 4618-3:1999 Paints and varnishes — Terms and definitions for coating materials — Part 3: Surface preparation and methods of application ISO 4622:1992 Paints and varnishes — Pressure test for stackability ISO 4623-1:2000 Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates ISO 4624:1978 Paints and varnishes — Pull-off test for adhesion ISO 4628-1:1982 Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common

types of defect — Part 1: General principles and rating schemes ISO 4628-2:1982 Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common

types of defect — Part 2: Designation of degree of blistering Paints and varnishes, Ed. 3, Vol. 1 Page 4 of 4 ISO 4628-3:1982 Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common

types of defect — Part 3: Designation of degree of rusting ISO 4628-4:1982 Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common

types of defect — Part 4: Designation of degree of cracking ISO 4628-5:1982 Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common

types of defect — Part 5: Designation of degree of flaking ISO 4628-6:1990 Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common

types of defect — Part 6: Rating of degree of chalking by tape method ISO 6270-1:1998 Paints and varnishes — Determination of resistance to humidity — Part 1: Continuous condensation ISO 6272:1993 Paints and varnishes — Falling-weight test Subject index Concordance list of ISO and ASTM standards

Volume 2: General test methods - Part 2 Year of publication: 2002 TQC art. nr LD3016 Contents: ISO 6441:1984 Paints and varnishes — Indentation test (spherical or pyramidal) ISO 6441-1:1999 Paints and varnishes — Determination of micro-indentation hardness — Part 1: Knoop hardness by measurement of

indentation length ISO 6441-2:1999 Paints and varnishes — Determination of micro-indentation hardness — Part 2: Knoop hardness by measurement of

indentation depth under load ISO 6503:1984 Paints and varnishes — Determination of total lead — Flame atomic absorption spectrometric method ISO 6504-1:1983 Paints and varnishes — Determination of hiding power — Part 1: Kubelka- Munk method for white and light-coloured paints ISO 6504-3:1998 Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio (opacity) of light-coloured

paints at a fixed spreading rate ISO 6713:1984 Paints and varnishes — Preparation of acid extracts from paints in liquid or powder form ISO 6860:1984 Paints and varnishes — Bend test (conical mandrel) ISO 7252:1984 Paints and varnishes — Determination of total mercury — Flameless atomic absorption spectrometric method ISO 7253:1996 Paints and varnishes — Determination of resistance to neutral salt spray (fog) ISO 7724-1:1984 Paints and varnishes — Colorimetry — Part 1: Principles ISO 7724-2:1984 Paints and varnishes — Colorimetry — Part 2: Colour measurement ISO 7724-3:1984 Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences ISO 7783-1:1996 Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films ISO 7783-1:1996 /Cor. 1:1998 Technical Corrigendum 1:1998 to ISO 7783-1:1996 ISO 7783-2:1999 Paints and varnishes — Coating materials and coating systems for exterior masonry and concrete — Part 2: Determination

and classification of watervapour transmission rate (permeability) Paints and varnishes, Ed. 3, Vol. 2 Page 2 of 3 ISO 7784-1:1997 Paints and varnishes — Determination of resistance to abrasion — Part 1: Rotating abrasive-paper-covered wheel method ISO 7784-2:1997 Paints and varnishes — Determination of resistance to abrasion — Part 2: Rotating abrasive rubber wheel method ISO 7784-3:2000 Paints and varnishes — Determination of resistance to abrasion — Part 3: Reciprocating test panel method ISO 8130-1:1992 Coating powders — Part 1: Determination of particle size distribution by sieving ISO 8130-2:1992 Coating powders — Part 2: Determination of density by gas comparison pyknometer (referee method) ISO 8130-3:1992 Coating powders — Part 3: Determination of density by liquid displacement pyknometer ISO 8130-4:1992 Coating powders — Part 4: Calculation of lower explosion limit ISO 8130-4:1992 /Cor. 1:1993 Technical Corrigendum 1:1993 to ISO 8130-4:1992 ISO 8130-5:1992 Coating powders — Part 5: Determination of flow properties of a powder/air mixture ISO 8130-6:1992 Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature ISO 8130-6:1992 / Amd. 1:1998 Amendment 1:1998 to ISO 8130-6:1992 ISO 8130-7:1992 Coating powders — Part 7: Determination of loss of mass on stoving ISO 8130-8:1994 Coating powders — Part 8: Assessment of the storage stability of thermosetting powders ISO 8130-9:1992 Coating powders — Part 9: Sampling ISO 8130-10:1998 Coating powders — Part 10: Determination of deposition efficiency ISO 8130-11:1997 Coating powders — Part 11: Inclined-plane flow test ISO 8130-12:1998 Coating powders — Part 12: Determination of compatibility ISO 8130-13:2001 Coating powders — Part 13: Particle size analysis by laser diffraction ISO/TR 9038:1991 Paints and varnishes — Determination of the ability of liquid paints to sustain combustion ISO 9117:1990 Paints and varnishes — Determination of through-dry state and through-dry time — Method of test ISO 9514:1992 Paints and varnishes — Determination of the pot-life of liquid systems — Preparation and conditioning of samples and

guidelines for testing ISO 11341:1994 Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered xenon-arc radiation ISO 11503:1995 Paints and varnishes — Determination of resistance to humidity (intermittent condensation) ISO 11507:1997 Paints and varnishes — Exposure of coatings to artificial weathering — Exposure to fluorescent UV and water Paints and

varnishes, Ed. 3, Vol. 2 Page 3 of 3 ISO 11890-1:2000 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method ISO 11890-2:2000 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 2: Gas-chromatographic method ISO 11997-1:1998 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity ISO 11997-1:1998 / Cor. 1:1998Technical Corrigendum 1:1998 to ISO 11997-1:1998 ISO 11997-2:2000 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light

ISO 11998:1998 Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings ISO 12137-1:1997 Paints and varnishes — Determination of mar resistance — Part 1: Method using a curved stylus ISO 12137-1:1997 / Cor. 1:1998 Technical Corrigendum 1:1998 to ISO 12137-1:1997 ISO 12137-2:1997 Paints and varnishes — Determination of mar resistance — Part 2: Method using a pointed stylus ISO 13803:2000 Paints and varnishes — Determination of reflection haze on paint films at 20 degrees ISO 14680-1:2000 Paints and varnishes — Determination of pigment content — Part 1: Centrifuge method ISO 14680-2:2000 Paints and varnishes — Determination of pigment content — Part 2: Ashing method ISO 14680-3:2000 Paints and varnishes — Determination of pigment content — Part 3: Filtration method ISO 15181-1:2000 Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for

extraction of biocides ISO 15181-2:2000 Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 2: Determination of copper-

ion concentration in the extract and calculation of the release rate ISO 15184:1998 Paints and varnishes — Determination of film hardness by pencil test ISO 15234:1999 Paints and varnishes — Testing of formaldehyde-emitting coatings and melamine foams — Determination of the steady-state

concentration of formaldehyde in a small test chamber ISO 15528:2000 Paints, varnishes and raw materials for paints and varnishes — Sampling ISO 15880:2000 Paints, varnishes and binders — Determination of MEQ value of waterbased coating materials and binders Subject index Concordance list of ISO and ASTM standards

Volume 3: Raw materials Year of publication: 2002 TQC art. nr LD3016 Contents ISO 150:1980 Raw, refined and boiled linseed oil for paints and varnishes — Specifications and methods of test ISO 276:1981 Linseed stand oil for paints and varnishes — Specifications and methods of test ISO 277:1983 Raw tung oils for paints and varnishes — Specifications and methods of test ISO 473:1982 Lithopone pigments for paints — Specifications and methods of test ISO 510:1977 Red lead for paints ISO 591-1:2000 Titanium dioxide pigments for paints — Part 1: Specifications and methods of test ISO 787-1:1982 General methods of test for pigments and extenders — Part 1: Comparison of colour of pigments ISO 787-2:1981 General methods of test for pigments and extenders — Part 2: Determination of matter volatile at 105 degrees C ISO 787-3:2000 General methods of test for pigments and extenders — Part 3: Determination of matter soluble in water — Hot extraction

method ISO 787-4:1981 General methods of test for pigments and extenders — Part 4: Determination of acidity or alkalinity of the aqueous extract ISO 787-5:1980 General methods of test for pigments and extenders — Part 5: Determination of oil absorption value ISO 787-7:1981 General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual

procedure ISO 787-8:2000 General methods of test for pigments and extenders — Part 8: Determination of matter soluble in water — Cold extraction

method ISO 787-9:1981 General methods of test for pigments and extenders — Part 9: Determination of pH value of an aqueous suspension ISO 787-10:1993 General methods of test for pigments and extenders — Part 10: Determination of density — Pyknometer method ISO 787-11:1981 General methods of test for pigments and extenders — Part 11: Determination of tamped volume and apparent density after

tamping Paints and varnishes, Ed. 3, Vol. 3 Page 2 of 5 ISO 787-13:1973 General methods of test for pigments — Part 13: Determination of watersoluble sulphates, chlorides and nitrates ISO 787-14:1973 General methods of test for pigments — Part 14: Determination of resistivity of aqueous extract ISO 787-15:1986 General methods of test for pigments and extenders — Part 15: Comparison of resistance to light of coloured pigments of

similar types ISO 787-16:1986 General methods of test for pigments and extenders — Part 16: Determination of relative tinting strength (or equivalent

colouring value) and colour on reduction of coloured pigments — Visual comparison method ISO 787-17:1973 General methods of test for pigments — Part 17: Comparison of lightening power of white pigments ISO 787-18:1983 General methods of test for pigments and extenders — Part 18: Determination of residue on sieve — Mechanical flushing

procedure ISO 787-19:1974 General methods of test for pigments — Part 19: Determination of watersoluble nitrates (Salicylic acid method) ISO 787-21:1979 General methods of test for pigments and extenders — Part 21: Comparison of heat stability of pigments using a stoving

medium ISO 787-22:1980 General methods of test for pigments and extenders — Part 22: Comparison of resistance to bleeding of pigments ISO 787-23:1979 General methods of test for pigments and extenders — Part 23: Determination of density (using a centrifuge to remove

entrained air) ISO 787-24:1985 General methods of test for pigments and extenders — Part 24: Determination of relative tinting strength of coloured pigments

and relative scattering power of white pigments — Photometric methods ISO 787-25:1993 General methods of test for pigments and extenders — Part 25: Comparison of the colour, in full-shade systems, of white,

black and coloured pigments —Colorimetric method ISO 788:1974 Ultramarine pigments for paints ISO 1247:1974 Aluminium pigments for paints ISO 1247:1974 Amd. 1:1982 Amendment 1:1982 to ISO 1247:1974 ISO 1248:1974 Iron oxide pigments for paints ISO 1249:1974 Zinc chromate pigments — Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments ISO 1249:1974 /Cor. 1:1992 Technical Corrigendum 1:1992 to ISO 1249:1974 ISO 1625:1998 Plastics — Polymer dispersions — Determination of non-volatile matter (residue) at specified temperatures ISO 2040:1972 Strontium chromate pigments for paints ISO 2068:1972 Barium chromate pigments for paints ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) — Determination of partial acid value and total acid value ISO 2495:1995 Iron blue pigments — Specifications and methods of test ISO 2554:1997 Plastics — Unsaturated polyester resins — Determination of hydroxyl value Paints and varnishes, Ed. 3, Vol. 3 Page 3 of 5

ISO 3219:1993 Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational

viscometer with defined shear rate ISO 3262-1:1997 Extenders for paints — Specifications and methods of test — Part 1: Introduction and general test methods ISO 3262-2:1998 Extenders for paints — Specifications and methods of test — Part 2: Barytes (natural barium sulfate) ISO 3262-3:1998 Extenders for paints — Specifications and methods of test — Part 3: Blanc fixe ISO 3262-4:1998 Extenders for paints — Specifications and methods of test — Part 4: Whiting ISO 3262-5:1998 Extenders for paints — Specifications and methods of test — Part 5: Natural crystalline calcium carbonate ISO 3262-6:1998 Extenders for paints — Specifications and methods of test — Part 6: Precipitated calcium carbonate ISO 3262-7:1998 Extenders for paints — Specifications and methods of test — Part 7: Dolomite ISO 3262-8:1999 Extenders for paints — Specifications and methods of test — Part 8: Natural clay ISO 3262-9:1997 Extenders for paints — Specifications and methods of test — Part 9: Calcined clay ISO 3262-10:2000 Extenders for paints — Specifications and methods of test — Part 10: Natural talc/chlorite in lamellar form ISO 3262-11:2000 Extenders for paints — Specifications and methods of test — Part 11: Natural talc, in lamellar form, containing carbonates ISO 3262-12:2001 Extenders for paints — Specifications and methods of test — Part 12: Muscovite-type mica ISO 3262-13:1997 Extenders for paints — Specifications and methods of test — Part 13: Natural quartz (ground) ISO 3262-14:2000 Extenders for paints — Specifications and methods of test — Part 14: Cristobalite ISO 3262-15:2000 Extenders for paints — Specifications and methods of test — Part 15: Vitreous silica ISO 3262-16:2000 Extenders for paints — Specifications and methods of test — Part 16: Aluminium hydroxides ISO 3262-17:2000 Extenders for paints — Specifications and methods of test — Part 17: Precipitated calcium silicate ISO 3262-18:2000 Extenders for paints — Specifications and methods of test — Part 18: Precipitated sodium aluminium silicate ISO 3262-19:2000 Extenders for paints — Specifications and methods of test — Part 19: Precipitated silica ISO 3262-20:2000 Extenders for paints — Specifications and methods of test — Part 20: Fumed silica ISO 3262-21:2000 Extenders for paints — Specifications and methods of test — Part 21: Silica sand (unground natural quartz) ISO 3549:1995 Zinc dust pigments for paints — Specifications and test methods Paints and varnishes, Ed. 3, Vol. 3 Page 4 of 5 ISO 3681:1996 Binders for paints and varnishes — Determination of saponification value — Titrimetric method ISO 3711:1990 Lead chromate pigments and lead chromate-molybdate pigments — Specifications and methods of test ISO 4619:1998 Driers for paints and varnishes ISO 4620:1986 Cadmium pigments — Specifications and methods of test ISO 4621:1986 Chrome oxide green pigments — Specifications and methods of test ISO 4625:1980 Binders for paints and varnishes — Determination of softening point — Ringand- ball method ISO 4626:1980 Volatile organic liquids — Determination of boiling range of organic solvents used as raw materials ISO 4629:1996 Binders for paints and varnishes — Determination of hydroxyl value — Titrimetric method ISO 4630:1997 Binders for paints and varnishes — Estimation of colour of clear liquids by the Gardner colour scale ISO 6271:1997 Clear liquids — Estimation of colour by the platinum-cobalt scale ISO 6744-1:1999 Binders for paints and varnishes — Alkyd resins — Part 1: General methods of test ISO 6744-2:1999 Binders for paints and varnishes — Alkyd resins — Part 2: Determination of phthalic anhydride content ISO 6744-3:1999 Binders for paints and varnishes — Alkyd resins — Part 3: Determination of unsaponifiable matter content ISO 6744-4:1999 Binders for paints and varnishes — Alkyd resins — Part 4: Determination of fatty acid content ISO 6745:1990 Zinc phosphate pigments for paints — Specifications and methods of test ISO 7142:1984 Binders for paints and varnishes — Epoxy resins — General methods of test ISO 7143:2000 Paints, varnishes and binders — Methods of test for characterizing water-based coating materials and binders ISO 7579:1990 Dyestuffs — Determination of solubility in organic solvents — Gravimetric method ISO 8618:1995 Plastics — Liquid phenolic resins — Conventional determination of non-volatile matter ISO 8623:1997 Tall-oil fatty acids for paints and varnishes — Specifications and test methods ISO 8780-1:1990 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 1: Introduction ISO 8780-2:1990 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 2: Dispersion using an

oscillatory shaking machine ISO 8780-3:1990 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 3: Dispersion using a

high-speed impeller mill ISO 8780-4:1990 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 4: Dispersion using a

bead mill ISO 8780-5:1990 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 5: Dispersion using an automatic muller

Volume 4: Preparation and protection of steel substrates Year of publication: 2002 TQC art. nr LD3016 Contents: ISO 8501-1:1988 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness

— Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings

ISO 8501-1:1988 /Suppl:1994 Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives

ISO 8501-2:1994 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings

ISO/TR 8502-1:1991 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 1: Field test for soluble iron corrosion products

ISO 8502-2:1992 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces

ISO 8502-3:1992 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure sensitive tape method)

ISO 8502-4:1993 Preparation of steel substrates before application of paint and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application

ISO 8502-5:1998 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)

ISO 8502-6:1995 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of soluble contaminants for analysis — The Bresle method Paints and varnishes, Ed. 3, Vol. 4 Page 2 of 5

ISO 8502-8:2001 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 8: Field method for the refractometric determination of moisture

ISO 8502-9:1998 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts

ISO 8502-10:1999 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 10: Field method for the titrimetric determination of water-soluble chloride

ISO 8503-1:1988 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces

ISO 8503-2:1988 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasiv blast-cleaned steel — Comparator procedure

ISO 8503-3:1988 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure

ISO 8503-4:1988 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel\ substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure

ISO 8504-1:2000 Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 1: General principles

ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning

ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 3: Hand- and power-tool cleaning

ISO 11124-1:1993 Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 1: General introduction and classification

ISO 11124-2:1993 Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 2: Chilled-iron grit

ISO 11124-3:1993 Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 3: High-carbon cast-steel shot and grit

ISO 11124-4:1993 Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning

abrasives — Part 4: Low-carbon cast-steel shot Paints and varnishes, Ed. 3, Vol. 4 Page 3 of 5 ISO 11125-1:1993 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning

abrasives — Part 1: Sampling ISO 11125-2:1993 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning

abrasives — Part 2: Determination of particle size distribution ISO 11125-3:1993 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning

abrasives — Part 3: Determination of hardness ISO 11125-4:1993 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning

abrasives — Part 4: Determination of apparent density ISO 11125-5:1993 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning

abrasives — Part 5: Determination of percentage defective particles and of microstructure ISO 11125-6:1993 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning

abrasives — Part 6 Determination of foreign matter ISO 11125-7:1993 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning

abrasives — Part 7: Determination of moisture ISO 11126-1:1993 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-

cleaning abrasives — Part 1: General introduction and classification ISO 11126-1:1993 /Cor. 1:1997 Technical Corrigendum 1:1997 to ISO 11126-1:1993 ISO 11126-1:1993 /Cor. 2:1997 Technical Corrigendum 2:1997 to ISO 11126-1:1993 ISO 11126-3:1993 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-

cleaning abrasives — Part 3: Copper refinery slag ISO 11126-4:1993 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-

cleaning abrasives — Part 4: Coal furnace slag ISO 11126-5:1993 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-

cleaning abrasives — Part 5: Nickel refinery slag ISO 11126-6:1993 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-

cleaning abrasives — Part 6: Iron furnace slag ISO 11126-7:1995 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-

cleaning abrasives — Part 7: Fused aluminium oxide ISO 11126-7:1995 /Cor. 1:1999 Technical Corrigendum 1:1999 to ISO 11126-7:1995 Paints and varnishes, Ed. 3, Vol. 4 Page 4 of 5 ISO 11126-8:1993 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-

cleaning abrasives — Part 8: Olivine sand ISO 11126-9:1999 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-

cleaning abrasives — Part 9: Staurolite ISO 11126-10:2000 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-

cleaning abrasives — Part 10: Almandite garnet ISO 11127-1:1993 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-

cleaning abrasives — Part 1: Sampling ISO 11127-2:1993 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-

cleaning abrasives — Part 2: Determination of particle size distribution ISO 11127-3:1993 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-

cleaning abrasives — Part 3: Determination of apparent density ISO 11127-4:1993 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-

cleaning abrasives — Part 4: Assessment of hardness by a glass slide test ISO 11127-5:1993 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-

cleaning abrasives — Part 5: Determination of moisture ISO 11127-6:1993 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-

cleaning abrasives — Part 6: Determination of water-soluble contaminants by conductivity measurement ISO 11127-7:1993 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-

cleaning abrasives — Part 7: Determination of water-soluble chlorides ISO 12944-1:1998 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction

ISO 12944-2:1998 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of

environments ISO 12944-3:1998 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations ISO 12944-4:1998 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and

surface preparation ISO 12944-5:1998 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint

systems ISO 12944-6:1998 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory

performance test methods ISO 12944-7:1998 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and

supervision of paint work