lcd pressure gauge & isolators - pvc pipe, pvc …...28 usa: 18884294635 18887788410 27012 c:...

27

INSTR

UMEN

TATIO

N

W W W. H AY WA R D F LOWC O N T R O L .C O M • 1 . 8 8 8 . 4 2 9 . 4 6 3 5

Heavy Duty Design

Dial Diameter 2-1/2”

Mounting Direct Mount, Bottom Connection

Housing

Protection Class

PVDF or Polypropylene with PTFE Diaphragm

NEMA 4X

Lens Polycarbonate

Dial LED or LCD Display

Connection 1/2” FNPT

Accuracy ±1.0%

Operating Temperature

Max. Working Temp. PVDF 195°F (90°C), PP 170°F (76°C)

Pressure Range 0-290 psi (Ambient Temp)

Output 4-20 mA + 2 (NPN or PNP) - LED Only

Power Requirement

10-30 VDC - LE / Battery - LC

LED VERSION

Heavy Duty Design

Different Pressure Units

Thermoplastic Housing

PP w/ FPM Diaphragm or PVDF w/ PTFE Diaphragm

1/2" FNPT

4-20 mA Output

+ 2 Relays

SPECIFICATIONS

GLD SERIES LED + LCD Pressure Gauge & IsolatorsINDUSTRY’S FIRST LED DIGITAL ALL THERMOPLASTIC COMBO GAUGE + ISOLATOR

KEY FEATURES & BENEFITS

• All Thermoplastic Construction (Gauge + Isolator)

• Heavy Duty One-piece Molded Design (No Assembly Required)

• No Filling Required

• Corrosion Resistant

• Designed to Act as Visual Pressure Alert for Bag/Filter Change-out

• Extra Large LED Display

• No Programming Required

• Reduces Small Pressure Surges caused by Water Hammer or Metering Pump Pulsations

• PTFE Diaphragm Standard

• High Accuracy ±1.0%

• Suitable for Corrosive Media & Slurries

• 15 ft of Cable for LED Model

• Replaceable Lithium Battery - LCD Model

• Long Battery Life (3 years) - LCD Model

• Simple Installation

1/2" FNPT

Optional Scales

Backlit LCD

Display

One-piece HousingNo Wires

PP or PVDF Body

LCD VERSION

Relay Alarm LEDs

Battery Powered

28

Contact Hayward Flow Control with questions: USA: 1.888.429.4635 • Fax: 1.888.778.8410 • One Hayward Industrial Drive • Clemmons, NC 27012 • Email: [email protected]

Canada: 1.888.238.7665 • Fax: 1.905.829.3636 • 2880 Plymouth Drive • Oakville, ON L6H 5R4 • Email: [email protected] us at: haywardflowcontrol.com

Hayward is a registered trademark of Hayward Industries, Inc. © 2015 Hayward Industries, Inc.

DIMENSIONS AND MATERIALS (UNITS : INCH)

GLD Series LED/LCD PRESSURE GAUGE & ISOLATOR

PP or PVDF

PP or PVDF

Diaphragm PTFE or FPM

2.32˝

2.13˝

3.17

˝

5.35

˝

One-piece Design No Assembly

Required

1/2˝ FNPT

1

Instrumentation Product Guide

Q U A L I T Y S E R V I C E I N T E G R I T Y15

INSTR

UMEN

TATIO

N


2

W W W. H AY WA R D F LOWC O N T R O L .C O M • 1 . 8 8 8 . 4 2 9 . 4 6 3 5W W W. H AY WA R D F LOWC O N T R O L .C O M • 1 . 8 8 8 . 4 2 9 . 4 6 3 5

TF SERIES Multi-Function True Union Paddlewheel Flow Meter ...............1

TFD SERIES Flow Meter/Totalizer + Visual Alert Alarm .............................3

TFT SERIES Insertion Paddle Wheel Flow Meter with Transmitter .............5

TLD SERIES Submersible PVC Level Pressure Sensor ..............................7

TLS SERIES Industrial Level Pressure Transmitter ....................................9

TLH SERIES High Performance Level Pressure Transmitter ....................11

TLF SERIES Submersible Level Junction Box .........................................13

VSA SERIES Industrial Visual/Audible Sentry Alarm System ...................14

TLC SERIES Level Process Display ........................................................15

TLM SERIES Industrial Level Controller ..................................................17

TLV SERIES Flow Display, Batcher Totalizer ...........................................19

GDS SERIES Double Sided All Thermoplastic Liquid Filled Pressure Gauge & Isolator .....................................................................21

GD SERIES Digital LED Pressure Alarm ..................................................23

GA SERIES Pressure Gauge & Isolator ...................................................25

GLD SERIES LED/LCD Pressure Gauge & Isolator ...................................27

GP SERIES Pressure Gauge & Isolator ...................................................29

Recommended Product Applications .....................................................33

Additional Hayward Flow Control and Pressure Regulating Products......33

Table of Contents

ENTFUN

C

ALARM

A-ADJ

PsiNew Hayward “Plug & Play” Instrumentation Products and Solutions...easy to install, highly accurate ways to measure and regulate your process system performance

For more than 50 years, Hayward Flow Control’s thermoplastic

fluid handling products and solutions have proven to excel in the

harshest environments. Thousands of customers worldwide have

installed our valves and actuators, filters, strainers and pump

products into aggressive and corrosive systems, as well as

delicate life support systems where the strictest chemical balance

is required. We understand the rigorous demands of industrial

piping, and are committed to offering advantageous products

for your application that will keep your process systems working

when they have to.

Hayward Flow Control now offers a full range of innovative and

corrosion resistant Instrumentation solutions for your process

system’s needs. This new category from Hayward includes flow

meters, level sensors, pressure gauges and other flow solutions

to measure and regulate your system’s performance in the harsh

environments that our products serve. Additionally, our new

flow meters, level sensors and gauges complement our

industry-leading range of thermoplastic valves, actuators,

strainers, filters and bulkhead fittings, and tank accessories,

pumps, and the applications they service. A complete package

of solutions to make your piping systems run smoothly.

Instrumentation Products and Solutions from Hayward Flow Control

carry our industry-leading, full two-year warranty. As an ISO9001

certified company, we strive for the highest quality possible for

use in a wide range of demanding applications.

INSTRUMENTATION

1

INSTR

UMEN

TATIO

N

W W W. H AY WA R D F LOWC O N T R O L .C O M • 1 . 8 8 8 . 4 2 9 . 4 6 3 5W W W. H AY WA R D F LOWC O N T R O L .C O M • 1 . 8 8 8 . 4 2 9 . 4 6 3 5W W W. H AY WA R D F LOWC O N T R O L .C O M • 1 . 8 8 8 . 4 2 9 . 4 6 3 5

TF SERIESMULTI-FUNCTION TRUE UNIONPADDLEWHEEL FLOW METER

High Impact Polycarbonate

Cover

True Union Design

Large LED Display

INSTRUMENTATION

1

2

3

4

5

EXPLODED VIEW

The TF Series Paddlewheel Flow Meter provides High Accuracy economically while ideal for thermoplastic piping systems. The TF Series consists of a rugged true union industrial design that is suitable for corrosive applications while providing a 1 amp selectable output relay that can be used as an alarm for high or low flow rate conditions.


• Perfect for Pump and Filter Protection• True Union Design 1/2˝ – 2˝ (Flanged 3˝ – 4˝)• High Accuracy– Less than ± 1.0% of Full Scale• Unit of Flow Measurement is Selectable (Liter/Gallon/Kilo-liter)• Corrosion Resistant Materials–PVC and Polypropylene• Economical Visual Indication• Easy Installation – No Mounting Kits• High Flow Range 0.33 ft/s – 32.8 ft / 0.3 m/s – 10 m/s• Easy to Program• Large Bright LED Digital Display• Horizontal or Vertical Installation• Low Pressure Drop• 4-20 mA and 0-5 VDC Pulse Output Signal• NEMA 4X/IP65 Enclosure• Password Protected Security

Fluid Water or Chemicals Liquid – Viscosity Range: 5-20 centistokes

Accuracy ± 1.0% of F.S. @ 20°C (68°F) – Repeatability ± 0.5% of Full Scale

Max Flow Velocity 32.8 ft/s max – (10 m/s max) (8 ft/s max. recommended for plastic piping systems)

Min Flow Velocity 0.33 ft/s min – (0.3 m/s min.)

Pressure Rating 150 psi / 10 Bar at 70°F / 23°C Non-Shock

Turndown 100:1

Response Time Real Time

Material of Construction Paddle: Tefzel / Body: PVC or PP Shaft: Zirconium Ceramic Seals: EPDM/FPM

Operating Temperature PVC < 140°F (60°C) PP < 176°F (80°C)

Electronics -13°F / -25°C to 122°F / +50°C

Protection Class NEMA 4X

Approvals & Listings CSA Listed, CE Approval and RoHS Compliant

Min Flow 1/2 to 1 GPM, 3/4 to 1-2/5 GPM, 1 to 2-1/2 GPM, 1-1/2 to 6-1/2 GPM, 2 to 10-1/2 GPM

SPECIFICATIONS

2 W W W. H AY WA R D F LOWC O N T R O L .C O M • 1 . 8 8 8 . 4 2 9 . 4 6 3 5




TF Series MULTI-FUNCTION TRUE UNION PADDLEWHEEL FLOW METER

DIMENSIONS

FLOW DATA FOR SCHEDULE 80 PIPE SIZE

H

ØD

1.6"

L

TF SERIES PARTS LIST

1. Flow Controller2. Lead Wire3. Hall Sensor4. Paddlewheel - Tefzel5. Body, End Connection & Unions - PVC or PP

TF SERIES MODELS:

TFM = Paddlewheel Flow Meter with TransmitterTFP = Paddlewheel Flow Meter & Flow TotalizerTFS = Paddlewheel Flow Meter & Relay Output

Pipe Size

H L D

TFM/TFP All Models

in mm in mm in mm

1/2˝ 3.74 95 5.51 140 1.61 41

3/4˝ 3.82 97 5.91 150 2.09 53

1˝ 3.95 100.3 6.30 160 2.36 60

1-1/2˝ 4.67 119 7.28 185 3.27 83

2˝ 5.21 132 7.75 197 4.33 110

Flow Rate (LPM) / USGPM

(O.D.) 0.3 m/s min. (1 ft/s) 10 m/s max. (32.8 ft/s*)

1/2˝ 3.5/0.92 120.0/31.7

3/4˝ 5.0/1.32 170.0/44.9

1˝ 9.0/2.4 300.0/79.2

1-1/2˝ 25.0/6.6 850.0/224.4

2˝ 40.0/10.6 1350.0/356.4

*Max. recommended velocity in thermoplastic piping is 8 ft/s

3

INSTR

UMEN

TATIO

N


Large LED Display

Double O-Ring FPM Seal

PVDF Body

Ceramic Shaft Bearings

PFA Paddle

All Thermoplastic Design

Push Buttons

4-20 mA +2 Relays

Changes to Red Led (Alarm Status)

* Max. recommended velocity for plastic pipe is 8 ft/s

TFD SERIESPADDLEWHEEL FLOW METER & TOTALIZER WITH ALERT ALARM


• Corrosion Resistant All Thermoplastic Wetted Parts - PVDF Body - Zirconium Dioxide Ceramic Shaft - PFA PTFE Paddle

• Large Digital Display Changes from Green to Red When in Alarm State

• Accuracy ± 0.75% of Full Scale• For Pipe Sizes 1/2 - 24 Inches• Flow Rate + Totalizer (Resettable -

Insight on Volume Till Change-Out)• Flow Velocity Range 0.33 to 32.8 ft/s

(0.1 to 8 m/s)*• Eprom Memory - Totalizer Value will not be lost• NEMA 4X Protection• Bright LED Display Flow Units--Liter, USGPM• Dual Output Relays• 4-20 mA Output Standard• Simple Installation

Supply Voltage DC 14 to 28V

Measuring Accuracy ±0.75% Full Scale

Repeatability ±0.5% Full Scale

Pipe Size 1/2” to 4”/DN15 to DN100 (-0) 6” to 24”/DN150 to DN600 (-1)

Input Sampling (Output Responses) Time

6 Cycles/Sec.

Readout Range 0-99999 (Flow Rate) 0-99999999 (Totalizer)

Relay Output Adjustable Set Points

Relay Contact Output DC 3-V-3 Amp

Analog Output 4-20 mA

Output Drive <10mA <10V

Protection Class IP66/NEMA 4X

RS-485 Baud Rate 19200/9600/4800/2400 (selective)

Turndown 100:1

RS-485 Protocol Modbus RTU Mode

Output Frequency 60.5Hz m/s Nominal (18.45Hz ft/s nominal) (Max. 10Hz (totalizer last digit))

Pulse Output Type Transistor NPN Open-Collector (Max. DC60V/100mA)

LED Display Bright Red or Green LED (0.4˝ High)

Parameter Setting Push Button

Memory Mode Non-Volatile Eprom Memory

Measuring Viscosity Range 0.5 to 20 centistokes (cst)

Maximum Operating Pressure/Temperature

PVDF Body 200 psi @ -22°F (-30°C) to 86°F (30°C) / 36 psi @ 194°F (90°C)

Storage Temperature -22°F to 176°F-22°F (-30°C to 80°C) (20 to 90RH Non-Condensed)

Certification EN 55022:1998/A1:2000 Class A

Pipe Size

H L D

TFM/TFP All Models

in mm in mm in mm

1/2˝ 3.74 95 5.51 140 1.61 41

3/4˝ 3.82 97 5.91 150 2.09 53

1˝ 3.95 100.3 6.30 160 2.36 60

1-1/2˝ 4.67 119 7.28 185 3.27 83

2˝ 5.21 132 7.75 197 4.33 110

SPECIFICATIONS

Polymide Body





Sensor Body Material Natural PVDF

Rotor Material PFA PTFE

Shaft and Bearing Material Zirconium Dioxide Ceramic (ZrO2)

O-rings Material FKM

Display Housing Materials Polyamide 66 + PBT + 15% Glass Filled (UL94V-0)

DIMENSIONS (UNIT : INCH) TERMINAL CONNECTIONS

MATERIALS

8˝/203 mm (-0)9.2˝/233 mm (-1)

Sensor Length (-0) = 2.70˝ / 68.5 mmSensor Length (-1) = 3.88˝ / 98.5 mm

TFD Series PADDLEWHEEL FLOW METER & TOTALIZER WITH VISUAL ALERT ALARM

5

INSTR

UMEN

TATIO

N


* Max. recommended velocity for plastic pipe is 8 ft/s

TFT SERIESINSERTION PADDLEWHEEL FLOW METER WITH TRANSMITTER


• All Thermoplastic Construction

• Excellent Chemical Resistance

• Pipe Size Range 1/2˝ -24˝ / DN15 - DN600

• Measuring Flow Range (0.33 to 32.8 ft/s)*

• Easy to Install

• Excellent for Low or High Temperatures -4°F to 194°F (-25°C to 90°C)

• NEMA 4X / IP65 or NEMA 6 / IP68 Ratings

• Extra Long Lasting PFA Paddle (Zirconium Dioxide Ceramic Shaft & Bearings)

• Double O-ring Seal

• High Pressure Rating (up to 200 psi / 14 Bar)

Epoxy Sealed (water tight)

Quick Disconnect

Pulse Output

PVDF or PP Body

PFA Paddle

FPM O-rings

SPECIFICATIONS

Ceramic Shaft + Bearings

Supply Voltage DC 24V

Measuring Accuracy ±0.75% of full scale

Repeatability ±0.5% of full scale

Pipe Size1/2” to 4˝ / DN15 to DN100 (-0) 6” to 24˝ / DN150 to DN600 (-1)

Output Frequency60.5 Hz per m/s nominal, 18.45 Hz per ft/s nominal

Output Signal 0-5 VDC

Sensor Body Material Polypropylene or PVDF

Rotor Material PTFE

Shaft and Bearings Material Zirconium Dioxide Ceramic (ZrO2)

O-ring Material FKM

Electrical ConnectionDIN Mini-Connector 43650-A (IP65) Electrical Cable (IP68)

Cable Type 3 conductor + shield 0.26A WG.PVC

Reverse Voltage Protection Included as Standard

Viscosity Range 0.5 to 20 centistokes (cst)

Maximum Particle Size<10% with Particle Size (<0.5 mm cross section or length)

Maximum Operating Pressure/Temperature

PVDF body 200 psi @ -30°F to 80°F 36 psi @ 194°F PP Body 180 psi @ -13°F to 80°F / 25 psi @180°F

Storage Condition PVDF -40°F to 194°F PP -22°F to 195°F

CE EMC Certification EN 55022:1998





DIMENSIONS (UNIT : INCH)

TFT Series INSERTION PADDLEWHEEL FLOW METER WITH TRANSMITTER

-0 or -1-0 or -1

Sensor Length (-0) = 2.70˝ / 68 mmSensor Length (-1) = 3.88˝ / 98 mm

0.47

1.561.56

1.051.25

0.47

1.051.25

1.10

0.61 0.50

NEMA 6P (IP68)

Electrical Cable 8m (26 ft) DIN Connector

NEMA 6X (IP65)

3 Cond. + Shield, 28 AWG. PVC (221°F / 105°C)

TFTXX-D TFTXX-D

-0 or -1-0 or -1


0.47

1.561.56

1.051.25

0.47

1.051.25

1.10

0.61 0.50

TERMINAL CONNECTIONS–FLOW CONTROLLER

7

INSTR

UMEN

TATIO

N


-0 or -1-0 or -1


0.47

1.561.56

1.051.25

0.47

1.051.25

1.10

0.61 0.50

TLD SERIES Submersible PVC Level Pressure SensorThe TLD Series modular two-piece all thermoplastic submersible probe is designed for quick change-outs. Replace sensor head - no need to change wiring. An easy solution for foam, vapor and condensate applications.


• Two-piece Modular Design

• Change Sensor Head without having to Rewire


• All PVC Rugged Design

• FEP Cable

• Highly Accurate > 0.25%

• Capable of Reading Tank/Sump Level 1.6 ft - 100 ft

APPLICATIONS

• Waste Water Treatment

• Chemical Dosing

• Leachate Collection

• Sodium Hypochlorite

• Corrosive Chemicals

• Foam, Soaps

• Fuming Chemicals - HCL, Nitric

FEP Cable

Ceramic Sensing Diaphragm

Two-piece PVC Body

TLF-100 Junction Box

2˝ Fitting2˝ Bulkhead

Captive ScrewsTLC Series Controller

TLD Series Sensor

TYPICAL INSTALLATION





INPUT PRESSURE RANGE

Nominal Pressure psi 2.2 3.5 6.1 8.7 10.8 14.3 17.3 23.4 26.0 43.4

Level ft 5.0 8.0 14 20 25 33 40 54 60 100

OUTPUT SIGNAL/SUPPLY

Standard 2-wire: 4-20 mA / VS = 9-32 VDC

PERFORMANCE

Accuracy Standard: Option:

IEC 60770 1 < ± 0.35% FSO< ± 0.25% FSO

Permissible Load Rmax = [(VS – VS min) / 0.02 A] Ω

Influence Effects Supply: 0.05% Full Scale/10VLoad: 0.05% Full Scale/KΩ

Long-term Stability ± 0.1% Full Scale over one year

Turn-on Time 700 msec

Mean Response < 200 msec measuring rate 5/sec

Max. Response Time 380 msec1 accuracy according to IEC 60770 – limit point adjustment (non-linearity, hysteresis, repeatability)

THERMAL EFFECTS (OFFSET AND SPAN)

Thermal Error ± 0.1% FSO / 10 Kin compensated range 0-50°C

PERMISSIBLE TEMPERATURES

Medium 5°F - 140°F (-10°C - 60°C)

Electronic/Environment 5°F - 140°F (-10°C - 60°C)

Storage 5°F - 140°F (-10°C - 60°C)

ELECTRICAL PROTECTION 2

Short-circuit Protection Permanent

Reverse Polarity Protection No Damage, but also no function

Electromagnetic Compatibility

Emission and immunity according to EN 61326

2 additional external overvoltage protection unit in terminal box KL 1 or KL 2 with atmospheric pressure reference available on request

MATERIALS (MEDIA WETTED)

Housing PVC

Seals FKM (Standard)

Diaphragm Standard: Ceramic Al20

3 96%

Option: Ceramic Al20

3 99.9%

ELECTRICAL CONNECTION

Cable with Sheath Material FEP 5°F - 140°F (-10°C - 60°C) Black

Cable Protection Standard: Without Cable Protection3 cable with integrated air tube for atmospheric pressure reference

MISCELLANEOUS

Current Consumption Max. 25 mA

Weight Approx. 400 g (without cable)

Ingress Protection IP 68

CE Conformity EMC Directive: 2004/108/EC

PIN CONFIGURATION

Electrical Connection

Binder Series 723 4 (5-pin) Cable Colors (DIN 47100)2-Wire 3-Wire

Supply + 3 3 White

Supply – 1 4 Brown

Signal + (only for 3-wire) - 1 Green

Shield 5 5 Green / Yellow4 in separated version

WIRING DIAGRAM

TLD Series SUBMERSIBLE PVC LEVEL PRESSURE SENSOR

9

INSTR

UMEN

TATIO

N


Ceramic Sensor

Protective Cover

Heavy Duty Design

Solid PVC Body

PTFE Coated Cable

SPECIFICATIONS

Pressure Measurement 0 – 14 ft/H2O up 54 ft/H

2O

5.8 psi – 23 psi

Power Source DC Power Only

Output Signal 2 wire: 4-20 mA



Captive ScrewsTLC Series Controller

TLS Series Sensor

TLS SERIES Industrial Level Pressure TransmitterKEY FEATURES & BENEFITS

• Designed for Continuous Level Measurement for Aggressive Liquid Medias

• Flush Sensor - Non Clogging Design

• PVC Transmitter for Aggressive Fluids

• PVC Body with Ceramic Sensor (Corrosion Resistant)

• Compact Design

• Excellent Long-Term Stability

• High Accuracy

• Heavy Duty PTFE Cable (3m, 5m, 10m or 15m Length) - Other Lengths Available

• Excellent for Foam, Vapor or Condensate

• Excellent for All Tanks/Sumps - Large (54’) or Small (16˝)

• Ceramic Sensing Diaphragm

• No Moving Parts

• Automatic Temperature Compensation

• CSA Listed and CE Approval

TYPICAL APPLICATIONS

• Waste Water Treatment

• Leachate Collection

• Waste Sumps or Pits

• Chemical Dosing

• Pits

• Chemical Tanks

SPECIFICATIONS






TLS Series INDUSTRIAL LEVEL PRESSURE TRANSMITTER


Nominal Pressure Gauge psi 5.8 8.7 14.5 23

Level ft/H20 13.0 20.0 33.5 54

Overpressure psi 2.1 29 29 58

Burst Pressure psi 29 58 58 72


Standard 2-wire: 4-20 mA

PERFORMANCE

Accuracy ±0.5% Full Scale or Better

Permissible Load Rmax=[(Vs-Vsmin)/0.02A]Ω

Influence Effects Supply: 0.05% Full Scale/10V Load: 0.05% Full Scale/KΩ

Long-term Stability ±0.1% Full Scale over one year

Response Time <10 msec or better1accuracy according to IEC 60770 – limit point adjustment (non-linearity, hysteresis, repeatability)


Permissible Temperatures Medium 32°F - 140°F (0°C - 60°C) Storage 14°F - 140°F (-10°C - 60°C)

ELECTRICAL PROTECTION


Reverse Polarity Protection No Damage to Sensor

Electromagnetic Compatibility Emission Immunity according to EN 61326


MISCELLANEOUS


Weight Approx. 0.4 lb /0.2 kg (without cable)


CE-Conformity EMC Directive: 2004/108/EC

PIN CONFIGURATION

Cable Colors

Electrical Connection Supply + White

Supply – Brown

Shield Green / Yellow


Cable with sheath material (3 wire cable with integrated air tube for atmospheric pressure reference)

FEP PTFE 0°F - 200°F (-32°C - 93°C)

MATERIALS (WETTED)

Housing PVC

Seals FKM or EPDM (FKM – Standard)

Diaphragm Ceramic Al2 03


Thermal Error <0.2% FSO/K in compensated range -13°F - 158°F (-25 - 70°C)

Supply

Supply

2-wire-system (current)

(Brown)

(White)

WIRING DIAGRAM

11

INSTR

UMEN

TATIO

N


MISCELLANEOUS


Weight Approx. 0.4 lb /0.2 kg (without cable)



MATERIALS (WETTED)

Housing PVC



TLH SERIES High Performance Level Pressure TransmitterKEY FEATURES & BENEFITS

• Continuous Level Measurement in the Toughest Industrial Environments and Corrosive Media

• All Thermoplastic Construction

• Housing Material in PVDF or PP Materials

• Excellent for Tank Level Measurement

• No Moving Parts

• High Accuracy


• Flush Sensor – Non-clogging

• Great for Applications where Foam – Vapor – Turbulence May Occur

• Small Footprint

• FEP PTFE Coated Cable (3m, 5m, 10m or 15m lengths)

• No Lost Signals


• Acids

• Caustics

• Sodium Hypochlorite

• Peroxides

• Leachate

• Sumps or Pits

• Chemical Dosing Holding Tanks

SPECIFICATIONS

Solid One-piece PVDF or PP Body

Ceramic Sensing Diaphragm

Heavy Duty Design

PTFE Coated Cable

Pressure Measurement

0-5.4 ft/H2O to 54 ft/H

2O

2.33 psi – 23 psi

Output Signal 2 wire: 4-20 mA



Captive ScrewsTLC Series Level Controller

TLH Series Sensor


FPM Seal





TLH Series HIGH PERFORMANCE LEVEL PRESSURE TRANSMITTER


Nominal Pressure Gauge psi 5.8 8.7 14.5 23

Level ft/H20 13.0 20.0 33.5 54

Overpressure psi 2.1 29 29 58

Burst Pressure psi 29 58 58 72


Standard 2-wire: 4-20 mA

PERFORMANCE

Accuracy ±0.5% Full Scale or Better

Permissible Load Rmax=[(Vs-Vsmin)/0.02A]Ω

Influence Effects Supply: 0.05% Full Scale/10V Load: 0.05% Full Scale/KΩ

Long-term Stability ±0.1% Full Scale over one year

Response Time <10 msec or better1accuracy according to IEC 60770 – limit point adjustment (non-linearity, hysteresis, repeatability)


Permissible Temperatures Medium 32°F - 140°F (0°C - 60°C) Storage 14°F - 140°F (-10°C - 60°C)



Reverse Polarity Protection No Damage to Sensor

Electromagnetic Compatibility Emission Immunity according to EN 61326


MISCELLANEOUS


Weight Approx. 0.4lb / 0.2 kg (without cable)



PIN CONFIGURATION

Cable Colors

Electrical Connection Supply + White

Supply – Brown

Shield Green / Yellow


Cable with sheath material (3 wire cable with integrated air tube for atmospheric pressure reference)

FEP PTFE 0°F - 200°F (-32°C - 93°C)

MATERIALS (WETTED)

Housing PVC




Thermal Error <0.2% FSO/K in compensated range -13°F - 158°F (-25°C - 70°C)

Supply

Supply

2-wire-system (current)

(Brown)

(White)

WIRING DIAGRAM

13

INSTR

UMEN

TATIO

N


MISCELLANEOUS


Weight Approx. 0.4lb / 0.2 kg (without cable)



MATERIALS (WETTED)

Housing PVC



TLF SERIESSUBMERSIBLE LEVEL JUNCTION BOX


• Suitable for All TL Series Sensors

• Glass Reinforced Polypropylene Housing for High Impact Resistance

• NEMA 4X Enclosure

• Threaded Polyethylene 2˝ Connection

• 2X Cord Grips: Cable-in, Cable-out


• Weather Resistant

• Easy Installation with Hayward Bulkhead Fittings

Liquid Run-off Design

1/4 Turn ON/OFF

Input 24VDC

Output 4-20 mA to Display

GFPP Housing

2˝ NPT Connection, Ideal Fit with a

Hayward Bulkhead Fitting

Cord Grip (Nylon or PVDF)

Flex Fitting (Turbulent

Applications)

DIMENSIONS AND ADDITIONAL FEATURES

* For fuming chemicals please ensure cord grip is sealed to prevent internal corrosion.

0.75˝ 2˝

4.72˝

3.5˝

Input Cable from Power Supply

Output Cable to Display Controller

2˝ NPT Connection

Heavy Duty Cord Grip

0.75˝ 2˝

4.72˝

3.5˝

OPTIONAL CORD GRIPS*






• High Intensity Red Alarm Light

• 90 dB Audible Alarm with External Test-Silence-Normal Positions

• Rugged NEMA 4X Industrial Design Enclosure

• Latching Lockable Cover (No Screws Required) Lockable

• External Mounting Feet Installs in Minutes

• UL Listed Enclosure (CSA)

• High Impact All Thermoplastic Polycarbonate Shell

• Small Foot Print – Compact Design


• Includes 6 ft Power Cord + Seal-tight Cord Connector


• High/Low Level Sensing for Tanks/Sumps

• Bag/Filter Change-out

• Leak Detection

• Flow/No Flow Sensors – Pump Protection

• Upset Condition Notification

VSA SERIESINDUSTRIAL VISUAL/AUDIBLE SENTRY ALARM SYSTEM

Turns Red in Alarm State

All Thermoplastic NEMA 4X Enclosure

Lock-out Capability

Built-in Audible Alarm

Mounting Holes

Hinged Design Easy Access

Test-silence Toggle Switch

Cable Grip (STD) + 6 ft Cord Included

SPECIFICATIONS

Dimensions 7˝ x 5˝ x 4.5˝

Enclosure NEMA 4X

Weight 2.1 lbs.

Voltage/Freq/Amps 120v/60 Hz/1 Amp

Input Power 100v – 240v

15

INSTR

UMEN

TATIO

N


TLC SERIESLEVEL PROCESS DISPLAY

The TLC Series process meter features easy to operate functional programming menu and a clear 4-digit, 3/4˝ LED display. The NEMA 4X Class (IP 65) housing makes the TLC Series an ideal choice for heavy-duty applications where corrosion resistance is needed. The optional infrared controller can be used to change the settings without opening the enclosure.


• All in One Controller with NEMA 4X Enclosure

• Input: 4-20 mA (Standard)

• 1A Relay Output & 4-20 mA Output

• Power Supply Output: 24 VDC (Standard)

• RS-485/Modbus RTU Standard

• Signal Peak Value Detection

• 3 Wire Cord Grips Included

ACCESSORIES

• IR Remote Controller*

Cord Grips (STD)

Corrosion Resistant Captive Screws

No Metal

Large Bright LED Display

NEMA 4X High Impact Enclosure

IR Remote Controller*

Power Supply/ Power Consumption

85–260 VAC/VDC

Display LED, 3/4˝ 4-Digit, Red, Adjustable Brightness

Displayed Values -999–9999 with decimal point

Input 0-20 mA or 4-20 mA

Accuracy 0.1% @ 25°C + One Digit

Stability 50 ppm/°C

Outputs (option) 0 or 2 x REL Imax = 1A

Passive Current Output (option)

4-20 mA (operating range max. 2.8 ÷ 24mA)

Power Supply Output

24 VDC

Communication Interface

RS-485

Operating Temp -4°F – 158°F (-20°C - 70°C)

Storage Temp -4°F – 158°F (-20°C - 70°C)

Protection Class NEMA 4X (IP65)

Case Wall Mounted

SPECIFICATIONS

*Remote controller is not part of the device and is available upon request.





PIN ASSIGNMENT

DIMENSIONS AND MATERIALS (UNIT : INCH)

TLC Series LEVEL PROCESS CONTROLLER & DISPLAY

Load No. 1

Power Supply 85.280V

External Meter e.g. PLC InputTransmitter

Level Sensor

4-20 Output

Source for Relays output, depends on the installation

MENU

ESCENTER

AL R1 R2

4.4o

8.4o

4.33˝ Housing Material: Polycarbonate

3.54˝

2.64˝

2.36

˝

3.15

˝

Infrared Receiver

Bright Large Display

Thresholds Exceeding LED Indicators (R)

Programming Pushbuttons

Alarm LED Indicator (AL)

17

INSTR

UMEN

TATIO

N


TLM SERIES Industrial Level ControllerKEY FEATURES & BENEFITS

• Large Bright LED Display

• Deceleration of Relay Outputs

• Adjustable Display Brightness

• Analog Output 4-20 mA & 2 Relays

• Acoustic Signal (Beep)

• Input Signal 4-20 mA

• 4-digit LED Display

• Sensor Power Supply 24 VDC Output

• Communication Interface RS-485 (Modbus RTU)

• 4 Configurable Relays (1 amp)

• Standard Dimensions for Retrofit Applications

Rugged Heavy Duty Design

Adjustable Brightness


Alarm Status

4 Relays

Push Button

24 VDC Power Supply to Sensor

TYPICAL INSTALLATIONS


ENC-100 NEMA 4X Enclosure with TLM

Series Display (Optional)

2˝ NPT2˝ Bulkhead

TLS Series Sensor





TLM Series INDUSTRIAL LEVEL CONTROLLER

SUPPLY

Supply Voltage Standard: 85 to 260 VAC

Power Consumption Max. 4.5 VA or W

CONTACTS (OPTIONAL)

Contact 2 SPST - Relays or 4 SPST Relays

Switching Voltage Max. 250 VAC

Switching Current Max. 1 A (cos ø1)

ANALOG OUTPUT (OPTIONAL)

Output Signal 4-20 mA

Permissible Load Max. 700 Ω

COMMUNICATION/PERFORMANCE

Communication Interface RS-485 (Modbus RTU)

Transmission Speed 1200 - 115200 bit/sec.


Operating Temperature -4°F - 122°F (-20°C - 50°C)

Storage Temperature -4°F - 122°F (-20°C - 50°C)

MISCELLANEOUS

Type of Protection IP 65 (Front Foil) NEMA 4X

Display 4-digit LED Display, Red, 4 x 20 mm

Range of Indication - 999 to 9999 + Decimal Point

Accuracy (25°C) ± 0.1% FSO

Housing Dimensions 3.78˝ x 1.89˝ x 3.86˝

Housing Panel

Housing Material NORYL-GFN2S E1

TRANSDUCER SUPPLY

DC Output 24 VDC to Sensor


Electrical Safety EN 61010-1 EMC EN 61326 CSA

SIGNAL INPUT

Input Signal Standard 4-20 mA

19

INSTR

UMEN

TATIO

N


MISCELLANEOUS

Type of Protection IP 65 (Front Foil) NEMA 4X

Display 4-digit LED Display, Red, 4 x 20 mm

Range of Indication - 999 to 9999 + Decimal Point

Accuracy (25°C) ± 0.1% FSO

Housing Dimensions 3.78˝ x 1.89˝ x 3.86˝

Housing Panel

Housing Material NORYL-GFN2S E1

TLV SERIESFLOW DISPLAY, BATCHER TOTALIZER

The TLV Series is a flow display located in a NEMA 4X, wall mounted case (IP 65), designed to work in tandem with Pulse Flow Meters or with current inputs of 0-20 mA or 4-20 mA. The TLV Series can totalize flow for 16 digits.


• Simple Plug and Play Design

• 2 Relay Outputs

• Power Supply Output 24 VDC

• RS-485 / Modbus RTU Standard

• Display of Instantaneous Flow Rate and the Total Flow Values

• Batching and Counting of Doses

• 4-20 mA Output + Relay Output

• 4-20 mA Output Standard• Simple Installation

ACCESSORIES

• IR Remote Controller IRC-20

• Remote Controller is not Part of the Device and is Available Upon Request

Push Buttons

Corrosion Resistant Captive Screws


NEMA 4X High Impact Enclosure

IR Remote Controller

IRC-20 (option)

Power Supply/ Power Consumption

85 - 260 VAC

Display LED, 6 x 13 mm high, 8 levels of adjustable brightness

Displayed Values 0 - 999999 + decimal point

Input Current: 0-20 mA or 4-20 mA

Accuracy 0.1% @ 70°C + One Digit (for 0 - 20 mA range)

Stability 50 ppm/°C

Counter Capacity Total Flow: over 4 x 109 (max. 16 significant digits)

Readout Precision Instantaneous Flow Values: Selected in the 0 - 0.000 decimal of unit

Total Flow and Batcher: Selected in the 0 - 0.000 of unit

Units Instantaneous Flow Values: 1 GPM, LTR’S Total Flow and Batcher: 1 GPM, LTR’S

Output (option) 0 or 2 x REL Imax = 1A

Passive Current Output (option)

4-20 mA (operating range max. 2.8 - 24 mA) (available with 1 relay or OC output, see ordering)

Power Supply Output

24 VDC +5%, -10% / max. 100 mA, stabilized

Communication Interface

RS-485, 8N1 and 8N2, 1200 bit/s - 115200 bit/s, Modbus RTU (not galvanically isolated)

Data Memory Non-volatile memory, EEPROM type

Operating Temperature -4°F - 158°F (-20°C - 70°C)

Storage Temperature -4°F - 158°F (-20°C - 70°C)

Protection Class NEMA 4X

Case Wall-Mounted; Material: Polycarbonate

Dimensions (WxHxD) 110 x 105 x 67 mm

SPECIFICATIONS





TLV Series PADDLEWHEEL FLOW METER & TOTALIZER WITH VISUAL ALERT ALARM


Control ValveFlow Meter

Batcher START/STOP

Light/Alarm

4-20

mA

4-20 mA

REL 2

RS-485 Programmable Input

PE N 85-260V

GND

Isolated Current Output 4-20 mA

(option)

GND

DATA

-

DATA

+

0-20 mA 4-20 mA

+24V GND Uo

+24 VDC

R1 (option)

L AC

PIN ASSIGNMENT

21

INSTR

UMEN

TATIO

N


GDS SERIESDOUBLE SIDED ALL THERMOPLASTIC LIQUID FILLED PRESSURE GAUGE & ISOLATOR


• Industry’s First All Thermoplastic Double Sided Gauge

• Heavy Duty Rugged Design; Simple to Install

• Completely Corrosion Resistant

• For use as a Visual Pressure Alert for Change-out or BAG Replacement

• Extra Large Colored Display

• High Accuracy of 1.5%

• Factory Pre-filled Glycerin / Vacuum


• One-piece Molded Design (No Assembly)

• Suitable for Corrosive Media + Slurries

Red

Yellow to RedGreen to Yellow

One Piece Rugged Design (No Assembly or Filling Required)

1/2˝ FNPT

2 sides

psi/Bar Scale

Adjustable

PP VERSION SPECIFICATIONS

PVDF VERSION

Dial Diameter Large 2-1/2˝ (Big Numbers-Clear Markers)

Mounting Direct Mount, Bottom Connection FNPT 1/2˝

Housing PVDF or Polypropylene with FPM or PTFE Diaphragm - One-piece Molded Design (No Assembly or Filling Required)

Lens Safety Glass

Dial Red/Black Scale White Background, dial arc 270°

Measuring Principle

Bourdon Tube-316 SS (Non Wetted) Diaphragm (Wetted Part) – FPM (Standard)

Movement 316 SS (Non Wetted)

Gauge 3 Adjustable Plastic Markers-Pressure Range Pointers fitted on the Bezel (Green, Yellow, Red)

Connection 1/2˝ FNPT

Filling Glycerin Filled

Accuracy ±1.5% F.S.


Max. Working Temp. PVDF-195°F / 90°C, PP-170°F / 76°C

Pressure Range Standard Range 0-60 / 0-100 / 0-160 psi (Second Scale: Bar) Other units available, e.g., MPa, etc.

FPM Diaphragm

PTFE Diaphragm





DIMENSIONS & FEATURES

GDS Series DOUBLE SIDED ALL THERMOPLASTIC LIQUID FILLED PRESSURE GAUGE & ISOLATOR

PP or PVDF

Housing

PP or

PVDF Diaphragm PTFE or FPM2.32˝

2.13˝

3.17

˝

5.35

˝

One-piece No Assembly

Required

1/2˝ FNPT

23

INSTR

UMEN

TATIO

N


GD SERIES Digital LED Pressure AlarmIDEAL FOR BASKET STRAINERS & BAG FILTER MONITORING


• Display Changes from Green to Red (Alarm Status)• Highly Accurate ±0.25% of Full Scale

• Ceramic Diaphragm 316 SS 1/2˝ NPT Process Port

• Display Pressure Units psi, Bar, Kg/Cm2, KPA, MPA, In Hg

• Two 3 Amp Relay Alarm Functions

• 4-20 mA Analog Output Function (Remote Display)

• Digital RS-485 Interface Function (optional)

• IP66 NEMA 4X Housing

• Thermoplastic Gauge Isolator for Corrosive Services, Slurries, Heavy Sediment (optional)

• Adjustable Range• Adjust ∆P Set Points• Lockable Software Security

All Thermoplastic Housing

Green for Non-alarm Status

Large 2-1/2˝ Display

Changes Color from Green

to Red

SPECIFICATIONS

Red LED Display Showing Alarm Condition: Time for Change-out or Cleaning

Available with Self-flushing Gauge Guard. Recommended for Chemicals, Heavy Sediment or Slurry Applications

Supply Voltage DC 14 to 30 V

Measuring Accuracy 0.25% Full Scale

Display Range -19999 ~ 99999

Relay Contact Output DC 30V-3A

Analog Output 4-20 mA

Display Bright Red/Green LED High (0.4˝)

Parameter Setting Push Button

Memory Mode Non-Volatile E2 PROM Memory

Diaphragm Materials Ceramic Al20

3 Sensor

Pressure Port Materials 316 SS

Display Materials Polyamide 66+ 15% Glass Filled

Operating Temperature Range -4°F to 176°F (-20°C to 80°C)

Storage Temperature Range -22°F to 176°F (-35°C to 80°C)

Pressure Range 0 to 400 psi

Polyamide Body

316 SS






GD Series DIGITAL LED PRESSURE ALARM

2.5˝

4.11˝

.79˝

1.13˝

.55˝ .47˝

1.42˝

1/2˝ NPT

1/2˝ NPT

CONNECTION DIAGRAM

25

INSTR

UMEN

TATIO

N


Red

Yellow to Red Green to Yellow

ImpactResistantCasing

One-piece Rugged Design (No Assembly or Filling Required)

1/2˝ FNPT

psi/BAR Dual Scale

PP VERSION

PVDF VERSION

GA SERIES Pressure Gauge & IsolatorIDEAL FOR FILTER AND STRAINER CHANGE-OUT ALERT


• Industry’s First All Thermoplastic Combo Gauge & Isolator

• One-piece Molded Design (No Assembly)

• Heavy Duty Design; Simple to Install



• High Accuracy

• Factory Pre-filled Glycerin / Vacuum Sealed




• Calibration Certified

Dial Diameter Large 2-1/2˝ Face (Big Numbers-Clear Markers)

Mounting Direct Mount, Bottom Connection FNPT 1/2˝

Housing PVDF or Polypropylene with FPM or PTFE Diaphragm

Lens Safety Glass

Dial Red & Black Scale White Background, Dial Arc 270°

Measuring Principle

Bourdon Tube-316 SS (Non Wetted) Diaphragm (Wetted Part) - FPM (Standard)


Gauge Red, Yellow, Green Moveable Plastic Markers- Pressure Range Pointers Fitted on the Bezel

Connection 1/2˝ FNPT

Filling Options: Glycerin or Silicone Filled


Operating Max. Working Temp. PVDF-195°F, PP-170°F Temperature

Pressure Range Standard Range 0-60 / 0-100 / 0-160 psi (Second Scale: Bar) Other units available, e.g., bar, MPa, etc.

SPECIFICATIONS

FPM Diaphragm

PTFE Diaphragm





DIMENSIONS AND MATERIALS

GA Series PRESSURE GAUGE & ISOLATOR

PP or PVDF

PP or PVDF

Diaphragm PTFE or FPM2.32˝

2.13˝

3.17

˝

5.35

˝

One-piece No Assembly

Required

1/2˝ FNPT

27

INSTR

UMEN

TATIO

N


Heavy Duty Design

Dial Diameter 2-1/2”

Mounting Direct Mount, Bottom Connection

Housing

Protection Class

PVDF or Polypropylene with PTFE Diaphragm

NEMA 4X

Lens Polycarbonate

Dial LED or LCD Display

Connection 1/2” FNPT

Accuracy ±1.0%


Max. Working Temp. PVDF 195°F (90°C), PP 170°F (76°C)

Pressure Range 0-290 psi (Ambient Temp)

Output 4-20 mA + 2 (NPN or PNP) - LED Only

Power Requirement

10-30 VDC - LE / Battery - LC

LED VERSION

Heavy Duty Design

Different Pressure Units

Thermoplastic Housing

PP w/ FPM Diaphragm or PVDF w/ PTFE Diaphragm

1/2" FNPT

4-20 mA Output

+ 2 Relays

SPECIFICATIONS

GLD SERIES LED + LCD Pressure Gauge & IsolatorsINDUSTRY’S FIRST LED DIGITAL ALL THERMOPLASTIC COMBO GAUGE + ISOLATOR





• Corrosion Resistant

• Designed to Act as Visual Pressure Alert for Bag/Filter Change-out

• Extra Large LED Display

• No Programming Required

• Reduces Small Pressure Surges caused by Water Hammer or Metering Pump Pulsations

• PTFE Diaphragm Standard


• Suitable for Corrosive Media & Slurries

• 15 ft of Cable for LED Model

• Replaceable Lithium Battery - LCD Model

• Long Battery Life (3 years) - LCD Model


Optional Scales

Backlit LCD

Display

One-piece HousingNo Wires

PP or PVDF Body

LCD VERSION

Relay Alarm LEDs

Battery Powered





DIMENSIONS AND MATERIALS (UNITS : INCH)

GLD Series LED/LCD PRESSURE GAUGE & ISOLATOR

PP or PVDF

PP or PVDF

Diaphragm PTFE or FPM

2.32˝

2.13˝

3.17

˝

5.35

˝

One-piece Design No Assembly

Required

1/2˝ FNPT

29

INSTR

UMEN

TATIO

N


GP SERIES Pressure Gauge & IsolatorPULSE AND SURGE SUPPRESSOR




• Simple to Install


• Red Markers Designed to Indicate Optimum Operating Range


• Reduces Pressure Surges caused by Water Hammer or Metering Pump Pulsations


• Factory Prefilled – Glycerin or Silicone / Vacuum Filled



Anti-rupture Snubber Design

SPECIFICATIONS

Dial Diameter Large 2-1/2˝ (Big Numbers-Clear Markers)

Mounting Direct Mount, Bottom Connection 1/2˝ FNPT

Housing One-piece Molded Design Polypropylene (No Assembly or Filling Required)

Lens Tough Impact Glass

Dial Red & Black Scale White Background, Dial Arc 270°

Measuring Principle

Bourdon Tube-316 SS (Non Wetted) Diaphragm (Wetted Part) - FPM (Standard)


Gauge Two Red Adjustable Plastic Markers Pressure Range Pointers Fitted on the Bezel

Connection Female Thread 1/2˝ NPT

Filling Glycerin or Silicone Filled



Max. Working Temp. 176°F/80°C

Pressure Range Standard Range 0-30 / 0-60 / 0-160 psi (Second Scale: Bar) Other units available, e.g., bar, MPa, etc.

Adjustable Range Tabs

1/2˝ FNPT

Vacuum Port

New Shock/Pulse Supressor Technology

PP Body

FPM Diaphragm

30





GP Series PRESSURE GAUGE & ISOLATOR

Φ 2.99˝

02

03

04

01

0

1

2

3

40

Unit : mm

Φ 2.99˝

2.99˝

1.30˝

5.31

˝

1/2˝ FNPT


WWW.HAYWARDFLOWCONTROL .COM

1A

1B

42

31195_CondensedProductGuide_v4.indd 42 9/4/15 5:45 PM



1A

1B

42


31

30512_Hayward IPG_Instrumentation9-21_4Cv2.indd 31 9/23/15 8:31 AM





Notes


1A

1B

42


33

INSTR

UMEN

TATIO

N


RV SERIES PRESSURE RELIEF VALVES

KEY FEATURES

• Available in PVC and CPVC

• Hand Adjustable, No Tools Needed

• Integrally Molded Threaded Gauge Port

• Pressure Relief from 5 psi to 75 psi

PRODUCT LINE PROCESS True Union Insert Paddle Wheel Level Pressure Controllers, Indicators Thermoplastic OR APPLICATION Flow Meters Flow Meters Transmitter and Alarms Pressure Gauges Aquatic & Animal Life Support • • • • • Chemical & Process Handling • • • • • Cooling Towers • • • • • Filtration & Separation Systems • • Food & Beverage • • • • • HVAC • • • • Irrigation • • • • • Marine • • • • • Mining • • • • • Municipal Water Treatment • • • • Paper & Pulp • • • • Plating & Surface Finishing • • • • • Power Generation • • • Pump Protection • • • Reverse Osmosis • • • • Semiconductor • • • • Storage & Dosing Tanks • • Waste Water Treatment • • • • • Water Parks • • • •

Additional Hayward Flow Control and Pressure Regulating ProductsCV SERIES PROFILE2™ PROPORTIONAL CONTROL BALL VALVES

KEY FEATURES

• Precise Flow Control

• Socket, Threaded or Flanged Ends


• Reversible Seats

• True Union Design

• Manual or Actuated

DAB SERIES TRUE UNION AND FLANGED DIAPHRAGM VALVES

KEY FEATURES

• Available in PVC, CPVC, PP and PVDF

• Position Indicator

• Sure-Grip Handwheel

• Choice of FPM, EPDM or PTFE Diaphragms

• Pnuematic or Electric Actuation

SV SERIES TRUE UNION SOLENOID VALVES

KEY FEATURES


• Corrosion-Resistant Polyester Coil• No Pressure Differential Required

for Operation

• Both 1/2" Conduit or SJ-Type Cord Electrical Connection

• 110 VAC Standard with optional 12/24 VAC or VDC and 220 VAC

• Normally Closed Design

PR SERIES PRESSURE REGULATOR VALVES

KEY FEATURES


• Hand Adjustable, No Tools Needed

• Integrally Molded Threaded Gauge Port

• Regulates from 5 to 75 psi

• Prevents Downstream Pressure from Exceeding the Set Pressure

GG SERIES GAUGE GUARDS

KEY FEATURES

• Available in PVC, CPVC, PP and PVDF

• Threaded NPT Connections

• FPM Membrane

• All Thermoplastic, No Rust or Corrosion

• No Metal Fasteners

• Rugged, Low Profile, Compact Design

• Work in Any Position

• Large Volume Gauge Guard Available

Recommended Product Applications


1A

1B

42


34




Hayward is a registered trademark of Hayward Industries, Inc. © 2015 Hayward Industries, Inc. INSPG0115


Canada: 1.888.238.7665 • Fax: 1.905.829.3636 • 2880 Plymouth Drive • Oakville, ON L6H 5R4 Canada • Email: [email protected] Visit us at: www.haywardflowcontrol.com

ENTFUN

C

ALARM

A-ADJ

Psi

ENTFUN

C

ALARM

A-ADJ

Psi

For more than 50 years, Hayward Flow Control’s thermo-plastic fluid handling products and solutions have proven to excel in the harshest environments. Thousands of customers worldwide have installed our valves and actuators, filters, strainers and pump products into aggressive and corrosive systems, as well as delicate life support systems where the strictest chemical balance is required. We understand the rigorous demands of industrial piping, and are committed to offering advantageous products for your application that will keep your process systems working when they have to.

Hayward Flow Control now offers a full range of innovative and corrosion resistant Instrumentation solutions for your process system’s needs. This new category from Hayward includes flow meters, level sensors, pressure gauges and other flow solutions to measure and regulate your system’s performance in the harsh environments that our products serve. Additionally, our new flow meters, level sensors and gauges complement our industry-leading range of thermo-plastic valves, actuators, strainers, filters and bulkhead fittings, and tank accessories, pumps, and the applications they service. A complete package of solutions to make your piping systems run smoothly.

Instrumentation Products and Solutions from Hayward Flow Control carry our industry-leading, full two-year warranty. As an ISO9001 certified company, we strive for the highest quality possible for use in a wide range of demanding applications.

All Thermoplastic Level Pressure TransmittersA first by Hayward, the TL Series of Level Pressure Transmitters eliminate the issues and challenges that ultrasonic sensors cannot. No more lost signals or level problems. The TLD and TLH are ideal for applications where foam, vapor and turbulence exist in your installation. All thermoplastic construction in PVC, PP and PVDF materials allow for continuous level measurement in the toughest industrial environments.

• High Accuracy


• Heavy Duty Design

• One-Piece Design with No Moving Parts

• PTFE Coated Cords

New Hayward “Plug & Play” Instrumentation Products and Solutions...easy to install, highly accurate ways to measure and regulate your process system performance

True Union Flow MetersTF Series Paddlewheel Flow Meters provide high ease of installation, accuracy and corrosion resistance, ideal for thermoplastic piping systems. With true union end connections, the TF Series are designed for corrosive applications while providing virtually no pressure drop. Additionally, all TF Series models feature an oversized, easy to read LED color display. Available in PVC and PP materials in sizes 1/2˝ – 2˝ with socket or threaded ends, and in 3˝ and 4˝ with flanged ends. All sizes feature a pressure rating of 150 PSI at 70°F non-shock.

• No K-Factor Programming for Schedule 80 Systems – Plug and Play!

• High Accuracy – Less than ± 1.0% of Full Scale

• Easy Installation – No Mounting Kits or Assembly required

• High Flow Range – 0.98 ft/s - 32.8 ft/s ( 0.3 m/s - 10 m/s)

• NEMA 4X Rated Enclosure

• Password Protected Security

INSTR

UMEN

TATIO

N

w w w. h ay wa r d f lowc o n t r o l .c o m • 1 . 8 8 8 . 4 2 9 . 4 6 3 5

Corrosion Resistant Insertion Paddlewheel Flow MetersThe TFD and TFT Series Insertion Paddlewheel Flow Meters provide the highest performance and accuracy, while fully corrosion resistant and durable. The TFD Series incorporates an industry first digital LED display for easy monitoring with a built-in totalizer and alarm. The TFT Series features either a direct cable connection or a DIN connector. Both models are all thermoplastic construction using high performance materials. The TFD and TFT are ideal for a wide range of applications including water & wastewater treatment, chemical processing & handling and aquatic systems.

• Zirconium dioxide ceramic shaft with PFA PTFE paddle

• For pipe sizes 1/2˝ – 24˝ (DN 15 to DN 600)

• Flow velocity range of 0.33 to 26 ft/s (0.1 to 8 m/s)

• NEMA 4X / IP65 Protection

Industrial Level Controllers & DisplaysTo complete the Hayward package for level sensors, the Hayward Instrumentation Product and Solutions program includes a range of controllers, displays and alarms designed for continuous level and temperature measurement in harsh environments. All units feature a large Bright LED display with display brightness and adjustable filter.

• 4-20 mA Input / Output

• Switch Mode, Hysteresis

• 4-digit LED Display

• Communication Interface RS-485 (Modbus RTU)

• NEMA 4X Rated Housing

• Optional Infrared Remote Control for specific models

Next Generation Thermoplastic Digital and Analog GaugesHayward’s line of pressure gauge guards now include a complete range of thermoplastic gauges with both digital and analog displays. The GD Series feature a digital LED display and alarm, making it ideal for use with Hayward bag filters and strainers for monitoring your systems change outs. The industry first double-sided gauge and isolator, the GDS Series allows for easy monitoring in tight spots. With one-piece thermoplastic housing, environmental corrosion is no longer an issue.

• Gauge housing in PP, Polyamide and PVDF materials

• Extra-large display – both analog and digital

• Red-yellow-green adjustable dial indicators for analog models

• IP66 / NEMA 4X Rated (GD Series)

• PTFE Diaphragm with one-piece molded design for GA and GDS Series

Corrosion Resistant Surge SuppressorThe new PS Series Suppressor/Pulsation Dampener is built tough and designed to operate flawlessly in the most demanding of industrial environments. The PS Series offers a new air feed/bleed technology that is self-adaptive, constantly adjusting spacing to the changing environment found within a pressurized piping system. Designed to minimize harmful hydraulic shocks caused by volumetric diaphragm pumps, water hammer and metering pumps. The PS Series is maintenance free with an active diaphragm-plunger that requires no preloading or tuning. A perfect compliment to Hayward’s industry-leading thermoplastic valves in water treatment systems.

• All Thermoplastic construction in GFPP or PVDF for corrosion resistance

• Heavy Duty PTFE Diaphragm

• No Pre-Charging Required

• Self-Adapting – up to 90% +

• Provides constant output – required for flow meters, pressure gauges, etc.

ON

R OUT1

R OUT2Set V

alue 1 (P-1)Set V

alue 2 (P-2)

High PressureHyste

resis

0

OFF

ON

OFF

Set Value 1 (P-1)

Set Value 2 (P-2)

High Pressure

HYS

HYS

0

ON

R OUT1

R OUT2

OFF

ON

OFF

HYS

HYS

Set Value 1 (P-1)

Set Value 2 (P-2)

High Pressure

0

ON

R OUT1

R OUT2

OFF

ON

OFFHayward is a registered trademark of Hayward Industries, Inc. © 2014 Hayward Industries, Inc. INS0914

Hayward customer and technical service teams stand ready to assist you with general and technical inquiries about our products, applications, inventory, purchase orders, literature and price lists. We take great care to provide our customers with the best service in the industry.

Contact us at [email protected] or 1.888.429.4635.

Contact Hayward Flow Control with questions:USA: 1.888.429.4635 • Fax: 1.888.778.8410 • One Hayward Industrial Drive • Clemmons, NC 27012 • Email: [email protected]

Canada: 1.888.238.7665 • Fax: 1.905.829.3636 • 2880 Plymouth Drive • Oakville, ON L6H 5R4 Canada • Email: [email protected] Visit us at: www.haywardflowcontrol.com

RECOMMENDED PRODUCT APPLICATIONS

PRODUCT LINE

PROCESS True Union Insert Paddle Wheel Level Pressure Controllers, Indicators Surge Thermoplastic OR APPLICATION Flow Meters Flow Meters Transmitter and Alarms Suppressors Pressure Gauges

Aquatic & Animal Life Support • • • • • • Chemical & Process Handling • • • • • • Cooling Towers • • • • •

Filtration & Separation Systems • • Food & Beverage • • • • • HVAC • • • • Irrigation • • • • • Marine • • • • • • Mining • • • • • • Municipal Water Treatment • • • • • Paper & Pulp • • • • Plating & Surface Finishing • • • • • Power Generation • • •

Pump Protection • • • Reverse Osmosis • • • • Semiconductor • • • • • Storage & Dosing Tanks • • Waste Water Treatment • • • • • • Water Parks • • • •

lcd pressure gauge & isolators - pvc pipe, pvc …...28 usa: 18884294635 18887788410 27012 c:...

Documents