large ic cushion - amazon s3 · 2020. 3. 30. · such as filter & dipsticks • engine...
TRANSCRIPT
SPECIFICATIONS
LARGE IC CUSHION
8000 – 15500 LBS.
CLASS
4
8FGC35U-70U
ToyotaForklift.comINTERNAL COMBUSTION ENGINE CUSHION TIRE
02
Factory General Manufacturing
Lumber Paper Retail
Distribution General Warehousing
STANDARD FEATURES
PERFORMANCE• EPA/CARB-certified engine• UL approved model type “LP”• Toyota 4-cylinder, 3.7 liter, OHV engine (1FS)• Distributorless ignition system • Alternator with built-in regulator (70A)• Automatic transmission with oil cooler• Full-floating powertrain• Electric shift control
• Treaded cushion tires (front & rear)• LCD multi-function display – includes:
- Data log, fuel, and operation information with QR code output - Master warning, wheel, direction, and mast tilt indicators - Various hours meters - Engine coolant temperature gauge
- Fuel gauge (excluding LP) - Check engine light - Engine oil pressure warning light - OPSS activation light - Parking brake indicator - SAS/OPSS warning light
SUPPORT• System of Active Stability™ (SAS)• Operator Presence Sensing System (OPSS)• Bolt-on overhead guard• Key lowering interlock
• Electric horn• Neutral start safety switch• Asbestos-free components• Orange forks
• LED headlights• Key off/headlight off system• Speed control
DURABILITY• Control Area Network (CAN-bus)
communication• Fully stamped steel side panels• Full-floating front axle• Moisture-resistant electric connectors• Limited free-lift 2-stage mast (V)
• High cooling capacity radiator • Low-maintenance battery • Large-capacity engine-cooling fan• 8" cyclone air cleaner • Plate-iron front fenders• Anti-restart ignition key switch
• Stamped steel engine hood• External hydraulic oil cooler• Radiator screen• Tilt cylinder boots
SERVICEABILITY• Easy-access, no tools required floorboard• Engine hood assist damper with lock device• Air cleaner discharge valve
• Easy-lift engine hood with wide 75° opening• Easy access to common service items
such as filter & dipsticks
• Engine protection system
ERGONOMICS• 11.8"-dia. two-spoke steering wheel• Load-sensing power steering• Cowl-mounted hydraulic control levers
with rubber boot covers• Double-action parking brake (hand)
• 12"-long dual operator assist grips• Low, wide entry steps• Oversized cup holder• Low-profile front cowl• Vinyl 4-way adjustable full-suspension seat
• Heavy-duty non-slip floor mat• Non-cinching seatbelt• Integrated headlight & turn signal lever
LARGE IC CUSHION
CAPACITY
8000 – 15500 LBS.WHEELBASE
61.8 – 74.2 IN.LOAD CENTER
24 IN.
INDUSTRIES
• Hydraulic accumulator• Intelli-Shift• Mini-lever controls with ErgoShift• Synchronized steering• Combination brake & inching pedal• EZ Pedal (foot directional control) • Steering wheel with knob• Strobe lights • LED front combination lights• LED rear combination lights• LED rear work light• LED reverse-activated rear work light• Cloth 4-way adjustable
full-suspension seat
• Swivel seat• Orange seatbelt• Box fin radiator• Fire extinguisher• 2-stage (FV) & 3-stage (FSV)
full free-lift masts• Hang-on sideshifters• Polished & tapered forks• Pre-cleaner for air intake• Rearview mirrors• Rear assist grip with horn button• Back up alarms• 12-volt power supply• 5-way hydraulics
• Boxcar Special counterweight• Paper Roll Special counterweight • Hydraulic valve for clamping attachments• Integral sideshifter• Integral sideshifting fork positioner• Forward and reverse facing blue light• Red zone light• Seatbelt interlock• Premium ventilation package• Polycarbonate overhead guard cover
LOAD CENTER
24 IN. OPTIONAL EQUIPMENT
Please contact your local, authorized Toyota Dealer for a complete list of available options.
04
LARGE IC CUSHION
TRUCK SPECIFICATIONSGENERAL DATA 8FGC35U 8FGC45U 8FGC55U
Load Capacity lb (kg) 8000 (3500) 10000 (4500) 12000 (5500)
Power Type LPG LPG LPG
Operator Position Seated Rider Seated Rider Seated Rider
Tire Type Front / Rear Cushion / Cushion Cushion / Cushion Cushion / Cushion
Wheels (x = driven) Front / Rear 2x / 2 2x / 2 2x / 2
EXTERIOR DIMENSIONS 8FGC35U 8FGC45U 8FGC55U
A Maximum Fork Height (top of forks) in (mm) 120 (3050) 120 (3050) 120.5 (3060)
B Free-Lift (top of forks) in (mm) 4.3 (110) 4.3 (110) 4.7 (120)
C Fork Size (T x W x L) in (mm) 2 x 6 x 42 (50 x 150 x 1070) 2 x 6 x 42 (50 x 150 x 1070) 2.4 x 6 x 48 (60 x 150 x 1220)
D Fork Spread Max. / Min. (outer edge to edge) in (mm) 45.7 / 11.8 (1160 / 300) 45.7 / 11.8 (1160 / 300) 46.1 / 11.8 (1170 / 300)
E Tilt Range (forward / backward) deg 5 / 6 5 / 6 5 / 6
F Length to Fork Face in (mm) 103.3 (2625) 107.1 (2720) 112.6 (2860)
G Overall Width in (mm) 50 (1270) 55.9 (1420) 55.9 (1420)
H Mast Lowered Height in (mm) 81.1 (2060) 83 (2110) 86.6 (2200)
I Mast Extended Height (top of load backrest) in (mm) 168.1 (4270) 168.1 (4270) 174.6 (4435)
J Overhead Guard Height in (mm) 83.5 (2120) 83.5 (2120) 83.5 (2120)
K Turning Radius (inside / outside) in (mm) 90 (2280) 94 (2390) 99.5 (2530)
L Load Distance 1 in (mm) 17.7 (450) 18.1 (460) 18.5 (470)
M Basic Right-Angle Stacking Aisle Width in (mm) 107.5 (2730) 112 (2850) 118 (3000)
PERFORMANCE DATA 8FGC35U 8FGC45U 8FGC55U
Speeds
Maximum Travel(forward / reverse)
Full Load mph (km/h) 11.8 (19.0) / 11.8 (19.0) 11.8 (19.0) / 11.8 (19.0) 13.0 (21.0) / 13.0 (21.0)
No Load mph (km/h) 11.8 (19.0) / 11.8 (19.0) 11.8 (19.0) / 11.8 (19.0) 13.0 (21.0) / 13.0 (21.0)
LiftingFull Load fpm (mm/sec) 100 (510) 98 (500) 91 (460)
No Load fpm (mm/sec) 108 (550) 100 (510) 94 (480)
LoweringFull Load fpm (mm/sec) 104 (530) 106 (540) 106 (540)
No Load fpm (mm/sec) 94 (480) 96 (490) 96 (490)
Drawbar Pull MaximumFull Load lb (kg) 9900 (4500) 9900 (4500) 9900 (4500)
No Load lb (kg) 2580 (1170) 2460 (1110) 3160 (1430)
Gradeability
1 mph (1.5 km/h)2 Full Load % 37 30 25
Maximum2Full Load % 47 37 34
No Load % 19 15 18
TRUCK WEIGHTS 8FGC35U 8FGC45U 8FGC55U
Total Weight lb (kg) 12640 (5730) 14510 (6580) 16250 (7370)
Weight Distribution
Full Load (front / rear) lb (kg) 17990 (7920) / 2650 (1310) 21240 (9550) / 3270 (1530) 24790 (11310) / 3460 (1560)
No Load (front / rear) lb (kg) 4590 (2080) / 8050 (3650) 4430 (2010) / 10080 (4570) 5560 (2520) / 10690 (4850)
TIRES 8FGC35U 8FGC45U 8FGC55U
Tires
Number (front / rear) 2 / 2 2 / 2 2 / 2
SizeFront 22 x 9 x 16 22 x 12 x 16 22 x 12 x 16
Rear 18 x 6 x 12-1 / 8 18 x 7 x 12-1/8 18 x 8 x 12-1 / 8
Wheelbase in (mm) 61.8 (1570) 61.8 (1570) 70.5 (1790)
Tread Width (front / rear) in (mm) 40.9 (1040) / 41.4 (1050) 43.9 (1115) / 42.4 (1080) 43.9 (1115) / 43.5 (1105)
Underclearance (full load)
Minimum with Load in (mm) 3.3 (85) 3.3 (85) 3.3 (85)
Center of Wheelbase in (mm) 5.7 (145) 5.7 (145) 5.7 (145)
Brake Service (foot) / Parking Hydraulic / Hand Hydraulic / Hand Hydraulic / Hand
POWER SYSTEM 8FGC35U 8FGC45U 8FGC55U
Battery (5-hour rating) V / Ah 12 / 48 12 / 48 12 / 48
Internal Combustion Engine
Make / Model TOYOTA 1FS TOYOTA 1FS TOYOTA 1FS
Rated Horsepower @ rpm
SAE HP 84 @ 2350 84 @ 2350 89 @ 2550
(kW) (63 @ 2350) (63 @ 2350) (66 @ 2550)
Rated Torque @ rpm SAE ft-lb 210 @ 1200 - 1400 210 @ 1200 - 1400 210 @ 1200 - 1400
(N-m) (290 @ 1200 - 1400) (290 @ 1200 - 1400) (290 @ 1200 - 1400)
Number of Cylinders 4 4 4
Piston Displacement cu in (cc) 224 (3685) 224 (3685) 224 (3685)
Fuel Tank Capacity US gal (liter) — — —
TransmissionType Automatic Automatic Automatic
Speeds (forward / reverse) 1 / 1 1 / 1 1 / 1
Auxiliary Hydraulic Function Specifications (for attachments)3
Max. Operating Pressure psi (kg/cm2) 2630 (185) 2630 (185) 2630 (185)
Max. Flow Rate gpm (lpm) 33.8 (128) 33.8 (128) 33.8 (128)
MODEL NUMBERS
1 Centerline of front axle to front face of forks.2 Computed values. Performance of LPG fuel system may be less than performance of standard model shown.3 Values taken at Hydraulic Control Valve. Does not take in to consideration losses through mast plumbing (hosing, fittings, QDs, etc.).
05
GENERAL DATA 8FGC60U 8FGC70U
Load Capacity lb (kg) 13500 (6000) 15500 (7000)
Power Type LPG LPG
Operator Position Seated Rider Seated Rider
Tire Type Front / Rear Cushion / Cushion Cushion / Cushion
Wheels (x = driven) Front / Rear 2x / 2 2x / 2
EXTERIOR DIMENSIONS 8FGC60U 8FGC70U
A Maximum Fork Height (top of forks) in (mm) 120.5 (3060) 120.6 (3065)
B Free-Lift (top of forks) in (mm) 4.9 (125) 4.9 (125)
C Fork Size (T x W x L) in (mm) 2.4 x 6 x 48 (60 x 150 x 1220) 2.6 x 6 x 48 (65 x 150 x 1220)
D Fork Spread Max. / Min. (outer edge to edge) in (mm) 46.1 / 11.8 (1170 / 300) 46.1 / 11.8 (1170 / 300)
E Tilt Range (forward / backward) deg 5 / 6 5 / 6
F Length to Fork Face in (mm) 118.1 (3000) 118.1 (3000)
G Overall Width in (mm) 57.1 (1450) 57.1 (1450)
H Mast Lowered Height in (mm) 94.5 (2400) 94.5 (2400)
I Mast Extended Height (top of load backrest) in (mm) 174.6 (4435) 174.6 (4435)
J Overhead Guard Height in (mm) 86 (2185) 86 (2185)
K Turning Radius (inside / outside) in (mm) 102 (2590) 102 (2590)
L Load Distance 1 in (mm) 20.9 (530) 20.9 (530)
M Basic Right-Angle Stacking Aisle Width in (mm) 123 (3120) 123 (3120)
PERFORMANCE DATA 8FGC60U 8FGC70U
Speeds
Maximum Travel(forward / reverse)
Full Load mph (km/h) 13.0 (21.0) / 13.0 (21.0) 13.0 (21.0) / 13.0 (21.0)
No Load mph (km/h) 13.0 (21.0) / 13.0 (21.0) 13.0 (21.0) / 13.0 (21.0)
LiftingFull Load fpm (mm/sec) 81 (410) 81 (410)
No Load fpm (mm/sec) 87 (440) 87 (440)
LoweringFull Load fpm (mm/sec) 104 (530) 104 (530)
No Load fpm (mm/sec) 94 (480) 94 (480)
Drawbar Pull MaximumFull Load lb (kg) 9900 (4500) 9900 (4500)
No Load lb (kg) 4160 (1890) 4100 (1860)
Gradeability
1 mph (1.5km/h)2 Full Load % 23 20
Maximum2Full Load % 31 28
No Load % 20 18
TRUCK WEIGHTS 8FGC60U 8FGC70U
Total Weight lb (kg) 19070 (8650) 20490 (9290)
Weight Distribution
Full Load (front / rear) lb (kg) 28970 (12910) / 3600 (1740) 32150 (14500) / 3840 (1790)
No Load (front / rear) lb (kg) 7300 (3310) / 11770 (5340) 7260 (3290) / 13230 (6000)
TIRES 8FGC60U 8FGC70U
Tires
Number (front / rear) 36193 36193
SizeFront 28 x 12 x 22 28 x 12 x 22
Rear 22 x 8 x 16 22 x 8 x 16
Wheelbase in (mm) 74.2 (1885) 74.2 (1885)
Tread Width (front / rear) in (mm) 45.1 (1145) / 42.9 (1090) 45.1 (1145) / 42.9 (1090)
Underclearance (full load)
Minimum with Load in (mm) 3.3 (85) 3.3 (85)
Center of Wheelbase in (mm) 7.1 (180) 7.1 (180)
Brake Service (foot) / Parking Hydraulic / Hand Hydraulic / Hand
POWER SYSTEM 8FGC60U 8FGC70U
Battery (5-hour rating) V / Ah 12 / 48 12 / 48
Internal Combustion Engine
Make / Model TOYOTA 1FS TOYOTA 1FS
Rated Horsepower @ rpm
SAE HP 89 @ 2550 89 @ 2550
(kW) (66 @ 2550) (66 @ 2550)
Rated Torque @ rpm SAE ft-lb 210 @ 1200 - 1400 210 @ 1200 - 1400
(N-m) (290 @ 1200 - 1400) (290 @ 1200 - 1400)
Number of Cylinders 4 4
Piston Displacement cu in (cc) 224 (3685) 224 (3685)
Fuel Tank Capacity US gal (liter) — —
TransmissionType Automatic Automatic
Speeds (forward / reverse) 1 / 1 1 / 1
Auxiliary Hydraulic Function Specifications (for attachments)3
Max. Operating Pressure psi (kg/cm2) 2990 (210) 2990 (210)
Max. Flow Rate gpm (lpm) 33.8 (128) 33.8 (128)
MODEL NUMBERS
1 Centerline of front axle to front face of forks.2 Computed values. Performance of LPG fuel system may be less than performance of standard model shown.3 Values taken at Hydraulic Control Valve. Does not take in to consideration losses through mast plumbing (hosing, fittings, QDs, etc.).
06
LARGE IC CUSHION
EXTERIOR DIMENSIONS
M
D
I A H
B C
E
CL
F
J
C
G
K
08
MAST SPECIFICATIONS
LARGE IC CUSHION
1 Height of standard load backrest is 48" (1220 mm).2 238 FSV requires wide tread.
MAST TYPE
MAXIMUM FORK HEIGHT
(TOP OF FORKS)
OVERALL HEIGHT FREE-LIFTTILT RANGE LOAD CAPACITY AT
24 IN. (610 MM) LOAD CENTER
LOWERED
EXTENDED WITHOUT LOAD
BACKREST
WITH STANDARD
LOAD BACKREST
WITHOUT LOAD BACKREST
WITH STANDARD LOAD BACKREST1 FWD BWD STANDARD TREAD WIDE TREAD
in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) deg deg lb (kg) lb (kg)8FGC35U
Wide Visible (V)
120 (3050) 81.1 (2060) 149.6 (3800) 168.1 (4270) 4.3 (110) 4.3 (110) 5 6 8000 (3500) 8000 (3500)
132 (3350) 88.2 (2240) 161.4 (4100) 179.9 (4570) 4.3 (110) 4.3 (110) 5 6 8000 (3500) 8000 (3500)
147.5 (3750) 96.1 (2440) 177.2 (4500) 195.7 (4970) 4.3 (110) 4.3 (110) 5 6 8000 (3500) 8000 (3500)
Full Free-Lift 2-Stage
(FV)
120 (3050) 81.1 (2060) 150.8 (3830) 168.1 (4270) 50.4 (1280) 33.1 (840) 5 6 8000 (3500) 8000 (3500)
132 (3350) 88.2 (2240) 162.6 (4130) 179.9 (4570) 57.5 (1460) 40.2 (1020) 5 6 8000 (3500) 8000 (3500)
Full Free-Lift 3-Stage (FSV)2
159.5 (4050) 81.1 (2060) 190.9 (4850) 207.5 (5270) 49.6 (1260) 33.1 (840) 5 5 8000 (3500) 8000 (3500)
171.5 (4350) 83.1 (2110) 202.8 (5150) 219.3 (5570) 51.6 (1310) 35.0 (890) 5 5 8000 (3500) 8000 (3500)
187 (4750) 88.2 (2240) 218.5 (5550) 235.0 (5970) 56.7 (1440) 40.2 (1020) 5 5 8000 (3500) 8000 (3500)
199 (5050) 92.1 (2340) 230.3 (5850) 246.9 (6270) 60.6 (1540) 44.1 (1120) 5 5 7730 (3500) 7730 (3500)
218.5 (5550) 98.0 (2490) 250.0 (6350) 266.5 (6770) 66.5 (1690) 50.0 (1270) 5 5 7470 (3400) 7470 (3400)
238 (6050) 105.9 (2690) 269.7 (6850) 286.2 (7270) 74.4 (1890) 57.9 (1470) 5 5 N/A 6500 (2950)
MAST TYPE
MAXIMUM FORK HEIGHT
(TOP OF FORKS)
OVERALL HEIGHT FREE-LIFTTILT RANGE
LOAD CAPACITY AT 24 IN. (610 MM) LOAD CENTER
LOWERED
EXTENDED WITHOUT LOAD
BACKREST
WITH STANDARD
LOAD BACKREST
WITHOUT LOAD BACKREST
WITH STANDARD LOAD BACKREST1 FWD BWD WIDE TREAD
in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) deg deg lb (kg)8FGC45U
Wide Visible (V)
120 (3050) 83.1 (2110) 152.0 (3860) 168.1 (4270) 4.3 (110) 4.3 (110) 5 6 10000 (4500)
132 (3350) 92.1 (2340) 163.8 (4160) 179.9 (4570) 4.3 (110) 4.3 (110) 5 6 10000 (4500)
147.5 (3750) 100.0 (2540) 179.5 (4560) 195.7 (4970) 4.3 (110) 4.3 (110) 5 6 10000 (4500)
Full Free-Lift 2-Stage
(FV)
120 (3050) 83.1 (2110) 152.2 (3865) 168.1 (4270) 51.0 (1295) 35.0 (890) 5 6 10000 (4500)
132 (3350) 92.1 (2340) 164.0 (4165) 179.9 (4570) 60.0 (1525) 44.1 (1120) 5 6 10000 (4500)
Full Free-Lift 3-Stage
(FSV)
159.5 (4050) 81.1 (2060) 191.5 (4865) 207.5 (5270) 49.0 (1245) 33.1 (840) 5 5 10000 (4500)
171.5 (4350) 85.6 (2175) 203.4 (5165) 219.3 (5570) 53.5 (1360) 37.6 (955) 5 5 10000 (4500)
187 (4750) 92.1 (2340) 219.1 (5565) 235.0 (5970) 60.0 (1525) 44.1 (1120) 5 5 10000 (4500)
199 (5050) 98.0 (2490) 230.9 (5865) 246.9 (6270) 65.9 (1675) 50.0 (1270) 5 5 10000 (4500)
218.5 (5550) 105.9 (2690) 250.6 (6365) 266.5 (6770) 73.8 (1875) 57.9 (1470) 5 5 9650 (4370)
238 (6050) 115.8 (2940) 270.3 (6865) 286.2 (7270) 83.7 (2125) 67.7 (1720) 5 5 8820 (4000)
09
1 Height of standard load backrest is 54” (1370 mm).
MAST TYPE
MAXIMUM FORK HEIGHT
(TOP OF FORKS)
OVERALL HEIGHT FREE-LIFTTILT RANGE
LOAD CAPACITY AT 24 IN. (610 MM) LOAD CENTER
LOWERED
EXTENDED WITHOUT LOAD
BACKREST
WITH STANDARD
LOAD BACKREST
WITHOUT LOAD BACKREST
WITH STANDARD LOAD BACKREST1 FWD BWD WIDE TREAD
in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) deg deg lb (kg)8FGC55U
Wide Visible (V)
120.5 (3060) 86.6 (2200) 152.8 (3880) 174.6 (4435) 4.7 (120) 4.7 (120) 5 6 12000 (5500)
132.5 (3360) 92.5 (2350) 164.6 (4180) 186.4 (4735) 4.7 (120) 4.7 (120) 5 6 12000 (5500)
148 (3760) 102.4 (2600) 180.3 (4580) 202.2 (5135) 4.7 (120) 4.7 (120) 5 6 12000 (5500)
Full Free-Lift 3-Stage
(FSV)
160 (4060) 81.1 (2060) 191.9 (4875) 214.0 (5435) 45.7 (1160) 27.2 (690) 5 6 12000 (5500)
171.5 (4360) 85.6 (2175) 203.7 (5175) 225.8 (5735) 50.2 (1275) 31.7 (805) 5 6 12000 (5500)
187.5 (4760) 92.1 (2340) 219.4 (5573) 241.5 (6135) 56.7 (1440) 38.2 (970) 5 6 12000 (5500)
199 (5060) 98.0 (2490) 231.3 (5875) 253.4 (6435) 62.6 (1590) 44.1 (1120) 5 6 11800 (5350)
211 (5360) 99.6 (2530) 243.1 (6175) 265.2 (6735) 64.2 (1630) 45.7 (1160) 5 6 11500 (5200)
219 (5560) 102.4 (2600) 251.0 (6375) 273.0 (6935) 66.9 (1700) 48.4 (1230) 5 6 11500 (5200)
238.5 (6060) 115.8 (2940) 270.7 (6875) 292.7 (7435) 80.3 (2040) 61.8 (1570) 5 6 11150 (5050)
MAST TYPE
MAXIMUM FORK HEIGHT
(TOP OF FORKS)
OVERALL HEIGHT FREE-LIFTTILT RANGE
LOAD CAPACITY AT 24 IN. (610 MM) LOAD CENTER
LOWERED
EXTENDED WITHOUT LOAD
BACKREST
WITH STANDARD
LOAD BACKREST
WITHOUT LOAD BACKREST
WITH STANDARD LOAD BACKREST1 FWD BWD WIDE TREAD
in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) deg deg lb (kg)8FGC60U
Wide Visible (V)
120.5 (3065) 94.5 (2400) 154.3 (3920) 174.6 (4435) 4.9 (125) 4.9 (125) 5 6 13500 (6000)
132.5 (3365) 100.4 (2550) 166.1 (4220) 186.4 (4735) 4.9 (125) 4.9 (125) 5 6 13500 (6000)
148 (3765) 108.3 (2750) 181.9 (4620) 202.2 (5135) 4.9 (125) 4.9 (125) 5 6 13500 (6000)
Full Free-Lift 3-Stage
(FSV)
160 (4065) 90.6 (2300) 194.5 (4940) 214.0 (5435) 56.1 (1425) 36.6 (930) 5 6 13500 (6000)
172 (4365) 94.5 (2400) 206.3 (5240) 225.8 (5735) 60.0 (1525) 40.6 (1030) 5 6 13500 (6000)
187.5 (4765) 98.0 (2490) 222.1 (5640) 241.5 (6135) 63.6 (1615) 44.1 (1120) 5 6 13300 (6000)
199.5 (5065) 108.3 (2750) 233.9 (5940) 253.4 (6435) 73.8 (1875) 54.3 (1380) 5 6 13100 (5940)
219 (5565) 118.1 (3000) 253.5 (6440) 273.0 (6935) 83.7 (2125) 64.2 (1630) 5 6 12750 (5780)
239 (6065) 120.1 (3050) 273.2 (6940) 292.7 (7435) 85.6 (2175) 66.1 (1680) 5 6 12350 (5600)
10
LARGE IC CUSHION
MAST SPECIFICATIONS
1 Height of standard load backrest is 54" (1370 mm).
MAST TYPE
MAXIMUM FORK HEIGHT
(TOP OF FORKS)
OVERALL HEIGHT FREE-LIFTTILT RANGE
LOAD CAPACITY AT 24 IN. (610 MM) LOAD CENTER
LOWERED
EXTENDED WITHOUT LOAD
BACKREST
WITH STANDARD
LOAD BACKREST
WITHOUT LOAD BACKREST
WITH STANDARD LOAD BACKREST1 FWD BWD WIDE TREAD
in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) deg deg lb (kg)8FGC70U
Wide Visible (V)
120.6 (3065) 94.5 (2400) 154.3 (3920) 174.6 (4435) 4.9 (125) 4.9 (125) 5 6 15500 (7000)
132.5 (3365) 100.4 (2550) 166.1 (4220) 186.4 (4735) 4.9 (125) 4.9 (125) 5 6 15500 (7000)
148 (3765) 108.3 (2750) 181.9 (4620) 202.2 (5135) 4.9 (125) 4.9 (125) 5 6 15500 (7000)
Full Free-Lift 3-Stage
(FSV)
160 (4065) 90.6 (2300) 194.5 (4940) 214.0 (5435) 56.1 (1425) 36.6 (930) 5 6 15350 (6960)
172 (4365) 94.5 (2400) 206.3 (5240) 225.8 (5735) 60.0 (1525) 40.6 (1030) 5 6 15350 (6960)
187.5 (4765) 98.0 (2490) 222.1 (5640) 241.5 (6135) 63.6 (1615) 44.1 (1120) 5 6 15000 (6800)
199.5 (5065) 108.3 (2750) 233.9 (5940) 253.4 (6435) 73.8 (1875) 54.3 (1380) 5 6 14700 (6660)
219 (5565) 118.1 (3000) 253.5 (6440) 273.0 (6935) 83.7 (2125) 64.2 (1630) 5 6 14300 (6480)
239 (6065) 120.1 (3050) 273.2 (6940) 292.7 (7435) 85.6 (2175) 66.1 (1680) 5 6 13900 (6300)
Butch – 360 Technician, ProLift, Cincinnati, Ohio
“I’M HERE TO MAKE SURE YOUR FORKLIFTS DON’T TAKE VACATION DAYS.”
HELP IS ALWAYS HERE WITH TOYOTA 360 SUPPORT.
The industry’s best and most comprehensive dealer network quickly delivers Toyota Certified Technicians to your work site. These specially-trained technicians can also help assess your warehouse and facility needs to recommend the right equipment for the job. And with the largest fleet of used and rental forklifts, Toyota 360 keeps your business running at full speed.
ToyotaForklift.com/360-Support
Some product features described herein are optional. Please consult your dealer for specifications. Details of specifications and equipment are based on information available at time of printing and may change without notice.
007228FGC3570SS©2020 Toyota Material Handling, Inc.