l3’physical’layer’(part2)’ · eitf25’internet,,techniques’and’applicaons’...
TRANSCRIPT
![Page 1: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/1.jpg)
EITF25 Internet-‐-‐Techniques and Applica8ons Stefan Höst
L3 Physical layer (part 2)
![Page 2: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/2.jpg)
From bits to signals
Principles of digital communica8ons
2
Internet
Digital data
Analog signal
![Page 3: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/3.jpg)
On-‐off keying
• Send one bit during Tb seconds and use two signal levels, “on” and “off”, for 1 and 0.
Ex.
3
t
s(t)
T 2T 3T
x=10010010101111100
A
0
![Page 4: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/4.jpg)
Non-‐return to zero (NRZ)
• Send one bit during Tb seconds and use two signal levels, +A and -‐A, for 0 and 1.
Ex.
4
t
s(t)
T 2T 3T
x=10010010101111100
A
-A
![Page 5: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/5.jpg)
Mathema8cal descrip8on
With g(t)=A, 0<t<T, the signals can be described as • On-‐off • NRZ
5
s(t) = ang(t − nT )n∑
an = xn
an = (−1)xn
Two signal alterna8ves • s0(t)=0 and s1(t)=g(t)
• s0(t)=g(t) and s1(t)=-‐g(t)
![Page 6: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/6.jpg)
Manchester coding
• To get a zero passing in each signal 8me, split the pulse shape g(t) in two parts and use +/-‐ as amplitude.
Ex.
6
T
g(t)
t
A
T/2
-A
t
s(t)
T/2 T 3T/2
x=10010010101111100
A
-A
2T 3T 4T 5T 6T 7T
![Page 7: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/7.jpg)
Mul8 level modula8on
• To transmit k bits in one signal alterna8ve of dura8on Ts, use M=2k levels.
Ex. Two bits per signal
7
t
s(t)
T 2T 3T
x=10 01 00 10 10 11 11 10 00
A
-A
3A
-3A
01:
10:
00:
11:
![Page 8: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/8.jpg)
Pulses in frequency
8 0 2 4 6 8 10−50
−45
−40
−35
−30
−25
−20
−15
−10
−5
0
Normalised frequency
|G(f)
|2 [dB]
RecManTri
![Page 9: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/9.jpg)
Bandwidth
• The bandwidth is the posi8ve frequency interval occupied by the main part of the signal power • Main lobe • WX% bandwidth contains X% of power in signal
Typical X: • 90% • 99% • 99.9%
9
Pulse Wlobe W90% W99%
Rect 2/T 1.7/T 20.6/T
Man 4/T ≈ 6/T ≈ 60/T
Tri 4/T 1.7/T 2.6/T
TRC 4/T 1.9/T 2.82/T
HCS 3/T 1.6/T 2.36/T
![Page 10: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/10.jpg)
Some system parameters • With signal 8me Ts the signal rate is Rs=1/Ts. The
unit of the signal rate is ocen Hz. • If k bits are transmided each signal alterna8ve, the
8me per bit is Tb=Ts/k. The bit rate, or data rate, is Rb=1/Tb. The unit is b/s or bps. Rb=kRs
• Bandwidth efficiency Rb/W, in bps/Hz • If P signal power, then • Es = TsP is energy per signal alterna8ve • Eb = TbP = Es/k energy per bit
10
![Page 11: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/11.jpg)
Modula8on in frequency
• Baseband signal centered around f=0. • Pass-‐band signal centered around f=f0, f0>>W. • Shic a BB signal up in frequency to PB by
mul8plying with cos(2 pi f0 t). • Shic a PB signal down to BB by mul8plying with
cos(2 pi f0 t) followed by low-‐pass filtering.
11
![Page 12: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/12.jpg)
Modula8on in frequency
12
⇥ =
# F
s(t)
t
�3A
�1A
1A
3A
cos(2⇡f0t)
t
sf0(t)
t
�3A
�1A
1A
3A
⇤ =S(f)
f
12 (�(f + f0) + �(f � f0))
f�f0 f0
12 (S(f + f0) + S(f � f0))
f�f0 f0
![Page 13: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/13.jpg)
ASK (Amplitude Shic Keying)
Use on-‐off keying at frequency f0. Ex.
13
t
s(t)
T 2T 3T
x=10010010101111100
A
0
s(t) = xng(t − nT )cos(2π f0t)n∑
![Page 14: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/14.jpg)
BPSK (Binary Phase Shic Keying)
Use NRZ at frequency f0, but view informa8on in phase
14
s(t) = (−1)xn g(t − nT )cos(2π f0t) = g(t − nT )cos(2π f0t + xnπ )n∑
n∑
t
s(t)
T 2T 3T
x=10010010101111100
A
-A
![Page 15: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/15.jpg)
QPSK and M-‐PSK
Quadrature PSK • 2 bits/signal gives 4 different phase levels,
15
s(t) = g(t − nT )cos 2π f0t + xnπ2
⎛⎝⎜
⎞⎠⎟n
∑xn ∈{0,1,2,3}
M-‐PSK • k bits/signal gives M=2k
different phase levels,
s(t) = g(t − nT )cos 2π f0t +ϕn( )n∑
ϕn =xnM2π
xn ∈{0,1,...,M −1}
![Page 16: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/16.jpg)
Signal space
Since and cos and sin behaves orthogonal, view PSK signals as points on a circle.
16
cos(2π f0t + π2 ) = sin(2π f0t)
cos
sin
s0(t)
s1(t)
s2(t)
s3(t)
cos
sin
s0(t)
s2(t)
s4(t)
s6(t)
s1(t)s3(t)
s5(t) s7(t)
QPSK 8-‐PSK
![Page 17: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/17.jpg)
M-‐PAM (Pulse Amplitude Modula8on)
• Use amplitude for informa8on carryer. • M=2k amplidudes
where
17
s(t) = ang(t − nT )cos(2π f0t)n∑ an = −M +1+ 2xn
g(t)cos1 3 5 7-1-3-5-7
s0(t) s1(t) s2(t) s3(t) s4(t) s5(t) s6(t) s7(t)
![Page 18: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/18.jpg)
M-‐QAM (Quadrature amplitude Modula8on)
Use that cos and sin are orthogonal to combine two orthogonal PAM constella8ons
18
g(t)cos
g(t)sin
g(t)cos
g(t)sin
![Page 19: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/19.jpg)
OFDM Orthogonal Frequency Division Mul8plexing
N QAM signals combined in an orthogonal way • Used in e.g. ADSL, VDSL, WiFi, DVB-‐C&T&H, LTE, LTE-‐A
19
f
W
![Page 20: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/20.jpg)
Transmission media
Guided media • Twisted pair copper cables • Coax cable • Fibre op8c cable
Unguided media • Radio • Microwave • Infra red
20
![Page 21: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/21.jpg)
Fibre op8c
• Transmission is done by light in a glass core (very thin)
• Total reflec8on from core to cladding
• Bundle several fibres in one cable
• Not disturbed by radio signals
21
![Page 22: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/22.jpg)
Op8cal network architekture
Point to point • Two nodes are connected by one dedicated fibre
Point to mul8-‐point • One one is connected to several end nodes • PON (Passive Op8cal Network)
2.5/1 Gbps
• Used in • Core network
• FdH 22
![Page 23: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/23.jpg)
Twisted pair copper cables
Two conducters twisted around each other • Twis8ng decreases disturbances (and emission) • Used for • Telephony grid (CAT3) • Ethernet (CAT5, CAT6 and some8mes CAT 7)
23
![Page 24: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/24.jpg)
Coax cable
One conductor surrounded by a shield • Used for • Antenna signals • Measurement instrumenta8ons
24
![Page 25: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/25.jpg)
Radio structures
Single antenna system
MIMO (Mul8ple In Mul8ple Out)
25
![Page 26: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/26.jpg)
Transmission impairments
When a signal is transmided on a link, it will deteriorate due to transmission impairment: • Adenua8on, loss of energy
• Electromagne8c emission
• Distor8on, modifica8on of signal shape • Mul8-‐path propaga8on
• Noise, various noise sources
26
Signal-‐to-‐noise ra8o (SNR) = Average signal power Average noise power
![Page 27: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/27.jpg)
Noise disturbances
Thermal noise (Johnson-‐Nyquist) • Generated by current in
a conductor • -‐174 dBm/Hz
(3.98*10-‐18 mW/Hz) • Rela8vely white Impulse noise • Ocen user generated
Intermodula8on noise • Different systems disturb
each other Cross-‐talk • User in the same system
disturb each other Background noise • Misc disturbances
(e.g. Telephony cable -‐140 dBm/Hz)
27
![Page 28: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/28.jpg)
Addi8ve white noise
A commonly used model for noise is the AWGN channel (Addi8ve White Gaussian Noise) • White noise with PSD(f) = N0/2 is added to the
signal • Acer LP filter and sampling the added noise
samples are Gaussian distributed
28
zn ∼ N 0, N0 / 2( )
![Page 29: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/29.jpg)
Gaussian channel
A Gaussian channel is a sta8s8cal transmission model with input variable X of total power E[X2]<P and output variable Y=X+Z, where Z is Normal distributed with zero mean and variance N.
29
X
Z ⇠ N⇣0,pN⌘
Y = X + Z
1
![Page 30: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/30.jpg)
A glimpse of Informa8on Theory
• The channel represents all impairments during transmission. • The informa8on about X by observing Y is given by the mutual informa8on
30
Channel X Y
I(X;Y ) = f (x, y)log2f (x, y)f (x) f (y)
dxdyR2∫
Maximise for E[X2]=P over all distribu8ons to get the channel capacity For the Gaussian channel
C = maxf (x ),E[X2 ]=P
I(X;Y )
C = 12log2 1+
PN
⎛⎝⎜
⎞⎠⎟
= 12log2 1+ SNR( )
![Page 31: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/31.jpg)
Shannon capacity
If s(t) is a band limited signal with bandwidth W and power P is transmided over an AWGN channel, the maximum achievable data rate [b/s] is given by
31
C =W log2 1+P
N0W⎛⎝⎜
⎞⎠⎟
=W log2 1+ SNR( )
ii
“InfoTheory” — 2014/11/5 — 10:13 — page 235 — #243 ii
ii
ii
9.3. Fundamental Shannon limit 235
Consider a band limited Gaussian channel with bandwidth W and noise levelN0. If the transmitted power constraint is P, then the capacity is given by
C = W log⇣
1 +P
N0W
⌘
[b/s] (9.52) Eq:Gauss:Capacity
The capacity maximises the throughput for a fixed signal power when usinga certain bandwidth. As the bandwidth increases the noise power will alsoincrease, whereas the signal power will remain, meaning that the capacity in-crease will diminish with increasing bandwidth. In Figure
fig:Gauss:GbandlimWvsC9.6 the capacity as a
function of the bandwidth is shown. As the bandwidth increases to infinity thefollowing limit value will be reached.
C• = limW!•
W log⇣
1 +P/N0
W
⌘
= limW!•
log⇣
1 +P/N0
W
⌘W
= log eP/N0 =P/N0ln 2
W
C
Figure 9.6: Capacity as a function of the bandwidth W for a fixed total signalpower P. fig:Gauss:GbandlimWvsC
Denoting the achieved bit rate as Rb, it is required that this is not more than thecapacity, C• > Rb. Further, assume that the signalling time is Ts and that ineach signal k information bits are transmitted. Then the average power is theenergy per time instance, which can be derived according to
P =EsTs
=EbkTs
=EbTb
(9.53) Gauss:Limit:PT
where Es is the average energy per transmitted symbol, Eb the average energyper information bit and Tb = Ts/k the average transmission time for each infor-mation bit. The variable Eb is very important since it can be compared between
![Page 32: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/32.jpg)
Fundamental Shannon limit
Lexng the bandwidth approach infinity gives
The achieved bit rate is Rb=Ts/k. Then Hence, communica8on is only possible if
Approaching the limit means lexng the computa8onal complexity go to infinity.
32
C∞ = limW→∞
W log 1+ P / N0
W⎛⎝⎜
⎞⎠⎟ =
P / N0
ln2 C∞
Rb= Eb / N0
ln2>1
Eb
N0
> ln2 = 0.69 = −1.59dB
![Page 33: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/33.jpg)
Data communication
Two nodes that transmit data on a physical link cannot do this simultaneously on the same frequencies with the same coding scheme.
33
![Page 34: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/34.jpg)
Data flow concepts
34
![Page 35: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/35.jpg)
Duplexing
Duplex communica8on can be achieved by • TDD (Time Division Duplexing)
Each direc8on has its 8me slots to transmit in. • FDD (Frequency Division Duplexing)
Each direc8on has its frequency slots to transmit in
35
![Page 36: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/36.jpg)
Multiplexing of links
Also, physical links need to be shared. This is called mulKplexing, where one physical link is divided into several channels.
36
![Page 37: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/37.jpg)
Multiplexing techniques
5 basic types of mul8plexing techniques: • Space-‐Division mul8plexing (SDM) • Time-‐Division Mul8plexing (TDM) • Frequency-‐Division Mul8plexing (FDM) • Wavelength-‐Division Mul8plexing (WDM) • Code-‐Division Mul8ple Access (CDMA)
37
![Page 38: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/38.jpg)
Space-Division Multiplexing (SDM)
SDM is used in cables. Each channel uses one line (op8cal fibre or twisted pair).
38
![Page 39: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/39.jpg)
Time-Division Multiplexing (TDM)
In TDM, each channel occupies a por8on of the 8me in the link.
39
![Page 40: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/40.jpg)
Frequency-Division Multiplexing (FDM)
FDM is an analog mul8plexing technique where each link has its own frequency band
Each channel uses a unique carrier frequency.
Ch 1 Ch 2
fCh N...
40
![Page 41: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/41.jpg)
Wavelength-Division Multiplexing (WDM)
In an op8cal fibre different wavelengths can be combined.
41
![Page 42: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/42.jpg)
Synchronous TDM
If a channel has nothing to send, its 8me slots will be empty!
42
![Page 43: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/43.jpg)
Example: Empty slots
43
![Page 44: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/44.jpg)
Statistical Time-Division Multiplexing
In Sta8s8cal TDM, the channels have no reserved 8me slots. Instead, slots are dynamically allocated. Data about the des8na8on is added to each slot. Sta8s8cal TDM usually has beder performance than Synchronous TDM when not all channels transmit data all the 8me.
44
![Page 45: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/45.jpg)
TDM comparison
45
![Page 46: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/46.jpg)
CDMA (Code-Division Multiple Access)
CDMA, or Spread Spectrum, is a mul8ple access technique for wireless links. The original signal is changed in a spreading process.
46
![Page 47: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/47.jpg)
Spread Spectrum techniques
• Frequency Hopping Spread Spectrum (FHSS) • A source uses many carrier frequencies. One
frequency is used at a 8me, but the frequencies are changed very ocen (e.g. 1000 8mes a second).
• Direct Sequence Spread Spectrum (DSSS) • Each data bit is replaced with n bits (called chips)
using a unique spreading code. The chip sequences for all users are orthogonal.
47
![Page 48: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/48.jpg)
Comparison with FDM
48
![Page 49: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/49.jpg)
DSSS
The original signal is combined with the spreading code.
49
Mod seq 1
Mod seq 2
Mod seq M
U 1
U 2
U N
US 1
US 2
US M
All added
Mod seq M
U N
Mod seq 2
U 2
Mod seq 1
U 1
![Page 50: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/50.jpg)
DSSS example
50
![Page 51: L3’Physical’layer’(part2)’ · EITF25’Internet,,Techniques’and’Applicaons’ Stefan’Höst L3’Physical’layer’(part2)’](https://reader035.vdocuments.site/reader035/viewer/2022070711/5ec902be09243a3c8e53e50d/html5/thumbnails/51.jpg)
OFDMA (OFDM access)
Mul8-‐user OFDM
51
f
W
User 1User 2User 3