l-858 airfield guidance signs - airport lighting companyairportlightingcompany.com/images/agm sign...
TRANSCRIPT
Airport Lighting Company · 104 Fairgrounds Drive · Manlius, NY 13104(315) 682-6460 · Fax (315) 682-6469 · airportlightingcompany.com · 11/15
Types
L-858 Airfield Guidance SignsCertified to FAA AC 150/5345-44 (Current Edition)
Provide visual guidance for pilots while navigating on taxiways or runways
1 18” face with 12” legend2 24” face with 15” legend3 30” face with 18” legend4 48” face with 40” legend5 30” face with 25” legend
1 120V (Not ETL Certified)2 4.8A to 6.6A (3-Step)3 2.8A to 6.6A (5-Step)4 Unlighted5 5.5A (1-Step)
Manufactured By
Patent No. 7,377,062
L-858Y Used for: Direction, Destination and BoundaryColor: Black/Yellow
L-858L Used for: Runway/Taxiway LocationColor: Yellow/Black
L-858BUsed for: Runway Distance RemainingColor: White/Black
L-858RUsed for: MandatoryColor: White with Black Outline/Red
Sizes
Styles
Life Cycle Comparison AGM LED vs IncandescentSize 3, Style 2, 4 Module Sign
AGM T10 Annual 10LED 45W Lamp Savings Years
VA 180 840
Annual $kw/h $98.55 $459.90 $361.35 $3,613.50
Lamp Life* (hrs) 100,000 1,000
Lamps/year @ $6 $0 $312.00 $312.00 $3,120.00
Lamp Changes/year $0 $2,600.00 $2,600.00 $26,000.00
Total Savings per Sign $32,733.50
US Average Transportation $kw/h per US Dept of Energy, August 2008Changing of lamp estimated at $50 each for labor & vehicle
*Calculated per FAA Order 5100.38c.910.a.2.b
AGM LED Signs Provide Significant Savings
Old Incandescent
Actual unretouched photographs
NEW LED!
When ordering, please consider energy-efficient LED signs. AGM has retrofit kits available to upgrade existing MR16 signs to LED.
LED Taxiway Signs
Guidance Signs
1
Airport Lighting Company · 104 Fairgrounds Drive · Manlius, NY 13104(315) 682-6460 · Fax (315) 682-6469 · airportlightingcompany.com · 11/15
EXAMPLE TYPE OF SIGN PURPOSE LOCATION/CONVENTIONMandatory: Hold position for taxiway/runway intersection.
Denotes entrance to runway from a taxiway.
Located L side of taxiway within 10 feet of hold position markings.
Mandatory: Holding position for runway/runway intersection.
Denotes intersecting runway. Located L side of rwy prior to intersection, & R side if rwy more than 150’ wide, used as taxiway, or has “land & hold short” ops.
Mandatory: Holding position for runway approach area.
Denotes area to be protected for aircraft approaching or departing a runway.
Located on taxiways crossing thru runway approach areas where an aircraft would enter an RSA or apch/departure airspace.
Mandatory: Holding position for ILS critical area/precision obstacle free zone.
Denotes entrance to area to be protected for an ILS signal or approach airspace.
Located on twys where the twys enter the NAVAID critical area or where aircraft on taxiway would violate ILS apch airspace (including POFZ).
Mandatory: No entry. Denotes aircraft entry is prohibited.
Located on paved areas that aircraft should not enter.
Taxiway Location. Identifies taxiway on which the aircraft is located.
Located along taxiway by itself, as part of an array of taxiway direction signs, or combined with a runway/taxiway hold sign.
Runway Location. Identifies the runway on which the aircraft is located.
Normally located where the proximity of two rwys to one another could cause confusion.
Runway Safety Area / OFZ and Runway Approach Area Boundary.
Identifies exit boundary for an RSA / OFZ or rwy approach.
Located on taxiways on back side of certain runway/taxiway holding position signs or runway approach area signs.
ILS Critical Area/POFZ Boundary. Identifies ILS critical area exit boundary.
Located on taxiways on back side of ILS critical area signs.
Direction: Taxiway. Defines designation/direction of intersecting taxiway(s).
Located on L side, prior to intersection, with an array L to R in clockwise manner.
Runway Exit. Defines designation/direction of exit taxiways from the rwy.
Located on same side of runway as exit, prior to exit.
Outbound Destination. Defines directions to take-off runway(s).
Located on taxi routes to runway(s). Never collocated or combined with other signs.
Inbound Destination. Defines directions to airport destinations for arriving aircraft.
Located on taxi routes to airport destinations. Never collocated or combined with other types of signs.
Information. Provides procedural or other specialized information.
Located along taxi routes or aircraft parking/staging areas. May not be lighted.
Taxiway Ending Marker. Indicates taxiway does not continue beyond intersection.
Installed at taxiway end or far side of intersection, if visual cues are inadequate.
Distance Remaining. Distance remaining info for take-off/landing.
Located along the sides of runways at 1000’ increments.
Holding Position. Denotes entrance to runway from a taxiway.
Located across centerline within 10 feet of hold sign on taxiways and on certain runways.
ILS Critical Area/POFZ Boundary. Denotes entrance to area to be protected for an ILS signal or approach airspace.
Located on twys where the twys enter the NAVAID critical area or where aircraft on taxiway would violate ILS apch airspace (including POFZ).
Taxiway/Taxiway Holding Position. Denotes location on taxiway or apron where aircraft hold short of another taxiway.
Used at ATCT airports where needed to hold traffic at a twy/twy intersection. Installed provides wing clearance.
Non-Movement Area Boundary. Delineates movement area under control of ATCT, from non-movement area.
Located on boundary between movement and non-movement area. Located to ensure wing clearance for taxiing aircraft.
Taxiway Edge.
Defines edge of usable, full strength taxiway.
Located along twy edge where contiguous shoulder or other paved surface NOT intended for use by aircraft.
Dashed Taxiway Edge.
Defines taxiway edge where adjoining pavement is usable.
Located along twy edge where contiguous paved surface or apron is intended for use by aircraft.
Surface Painted Holding Position. Denotes entrance to runway from a taxiway.
Supplements elevated holding position signs. Required where hold line exceeds 200’. Also useful at complex intersections.
Enhanced Taxiway Centerline.
Provides visual cue to help identify location of hold position.
Taxiway centerlines are enhanced 150’ prior to a runway holding position marking.
Surface Painted Taxiway Direction. Defines designation/direction of intersecting taxiway(s).
Located L side for turns to left. R side for turns to right. Installed prior to intersection.
Surface Painted Taxiway Location. Identifies taxiway on which the aircraft is located.
Located R side. Can be installed on L side if combined with surface painted hold sign.
B
22
J L
22FBO
7
T
B
NOISE ABATEMENTPROCEDURES IN EFFECT
2300 - 0500
EXAMPLE TYPE OF MARKING PURPOSE LOCATION/CONVENTION
AIRPORT SIGN AND MARKING – QUICK REFERENCE GUIDE
OK-08-0403
Ref. AC 150/5340-1J Standards for Airport Markings, and AC 150/5340-18D Standards for Airport Signs Systems
Gui
danc
e Si
gns
2
Airport Lighting Company · 104 Fairgrounds Drive · Manlius, NY 13104(315) 682-6460 · Fax (315) 682-6469 · airportlightingcompany.com · 11/15
Easily replace traditional L-858 signsEach module is mounted on an evenly spaced pair of legsSlip-flanges hold the legs secure with almost no gap in the assemblyEnvironmental forces are shared by legs and cabinet, and not concentrated on hardwareEach rounded face if made from expertly formed acrylicSize 1 & 2 signs available with optional Herculens panel (Herculens panels come factory installed on size 3 D-Lux signs)Legend panels are connected by translucent panel joints, which are welded together with adhesive and additionally reinforced with stainless steel hardwareEvery module features a top that is designed to easily guide the edge of the panels into place when it is replaced after re-lamping, and is fixed to the sign with 2 turn fasteners - no tools are required for re-lampingBase model brightness controls use technology that has been proven for years in the fieldOptional Style U power control system - a passive, non-inductive design that exhibits near- unity power factors on all regulator stepsAvailable in energy-saving LED
Size1=Size 12=Size 23=Size 35=Size 5
D-----F-
General Catalog Numbers
Example: D-3-3-H-3-SF-1 is a size 3 L-858 D-Lux sign, in style 3 with an LED board light option, 3 modules, single face, with an on/off switch
Style2=Style 2 (4.8A-6.6A)3=Style 3 (2.8A-6.6A)4=Style 4 (unlighted)5=Style 5 (5.5A)
Options1=On/Off SwitchS=LED Light Out IndicatorP=View PortE=External Power Cord*
Modules1=1 Module2=2 Modules3=3 Modules4=4 Modules
FacesS=Single FaceD=Double Face
L-858 D-LUX Guidance SignsCertified to FAA AC 15/5345-44 (Current Edition) FAA Engineering Brief No. 67
Exclusively from AGM, these LED guidance signs are bright, durable and energy efficient
All FAA Sizes, FAA Types and FAA Styles are available in LED
Light OptionH=LED BoardK=LED Array*U=TapSwitch w/ T10 LampA=T10 Style 5N=Unlighted
*Not ETL certified
Patent No. 7,377,062
The Herculens is the most durable sign panel on the market today. It comes factory installed in AGM’s patented Size 3 D-Lux brand rounded signs. More than 50% thicker than other panels, it is CNC-machined and expertly formed for a
solid fit. The Herculens is unyielding to jet blast, even when used without internal bracing or other cabinet modifications.
The use of Herculens panels to upgrade Size 1, 2 and 3 Lumacurve® signs has been approved for AIP funding.
*Not ETL Certified
Highlights
Guidance Signs
3
Airport Lighting Company · 104 Fairgrounds Drive · Manlius, NY 13104(315) 682-6460 · Fax (315) 682-6469 · airportlightingcompany.com · 11/15
Size Style Modules L-830 Transformer
VA Load
Power Factor
1 2 1.0 65W 39 .93
1 2 2.0 65W 44 .93
1 2 3.0 65W 49 .94
1 2 4.0 65W 54 .94
2 2 1.0 65W 41 .93
2 2 2.0 65W 49 .94
2 2 3.0 65W 56 .94
2 2 4.0 65W 65 .94
3 2 1.0 65W 44 .93
3 2 2.0 65W 54 .94
3 2 3.0 65W 65 .94
3 2 4.0 100W 77 .93
5 2 1.0 65W 44 .93
1 2 1.0 65W 39 .93
1 2 2.0 65W 44 .93
1 2 3.0 65W 49 .94
1 2 4.0 65W 54 .94
2 2 1.0 65W 41 .93
2 2 2.0 65W 49 .94
2 2 3.0 100W 57 .94
2 2 4.0 100W 69 .94
3 2 1.0 65W 44 .93
3 2 2.0 65W 54 .94
3 2 3.0 100W 69 .94
3 2 4.0 200W 77 .93
5 2 1.0 65W 44 .93
1 2 1.0 65W 39 .93
1 2 2.0 65W 44 .93
1 2 3.0 65W 49 .94
1 2 4.0 65W 54 .94
2 2 1.0 65W 41 .93
2 2 2.0 65W 49 .94
2 2 3.0 65W 56 .94
2 2 4.0 65W 65 .94
3 2 1.0 65W 44 .93
3 2 2.0 65W 54 .94
3 2 3.0 65W 65 .94
3 2 4.0 100W 77 .93
5 2 1.0 65W 44 .93
Transformer Requirements
Size Style Modules L-830 Transformer
VA Load
Power Factor
1 2 1.0 100W 73 1.0
1 2 2.0 100W 100 1.0
1 2 3.0 100W 128 1.0
1 2 4.0 200W 155 1.0
2 2 1.0 100W 100 1.0
2 2 2.0 200W 155 1.0
2 2 3.0 300W 210 1.0
2 2 4.0 300W 261 1.0
3 2 1.0 100W 128 1.0
3 2 2.0 300W 210 1.0
3 2 3.0 300W 273 1.0
3 2 4.0 500W 368 1.0
1 2 1.0 100W 73 1.0
1 2 2.0 200W 102 1.0
1 2 3.0 300W 129 1.0
1 2 4.0 300W 157 1.0
2 2 1.0 200W 102 1.0
2 2 2.0 300W 157 1.0
2 2 3.0 500W 210 1.0
2 2 4.0 600W 293 1.0
3 2 1.0 300W 129 1.0
3 2 2.0 500W 210 1.0
3 2 3.0 600W2 312 1.0
3 2 4.0 800W2 390 1.0
2 Use Y connector to add wattages of two L830s to achieve correct power
T10 Tapswitch LED Board
Replacement PartsLight
OptionPart
Number Description
LED
C7-LVCV2 Low voltage power control module
C7-LEDV2 LED modules
C7-DRVR LED driver module
C7-BRG Bridge rectifier
T10D7-T10L T10P 45W lamp
C7-24A Tapswitch (Style U only)
Gui
danc
e Si
gns
4
Airport Lighting Company · 104 Fairgrounds Drive · Manlius, NY 13104(315) 682-6460 · Fax (315) 682-6469 · airportlightingcompany.com · 11/15
Easily replace traditional L-858 signsSolidly & seamlessly integrate off-the-shelf parts and custom fabrication for strength & flexibility while minimizing operating costsPlatform for cabinet machined from solid, heavy-gauge aluminum constructionFree of gaps and joints that weaken modular signs and allow penetration of wind, rain, dirt and snowInherently stronger than modular signs because it doesn’t rely on the strength of hardware used to piece modular signs togetherI-Lux is as short as possible because it is made per FAA lettering specifications & not artifically lengthened over seams and gapsAGM’s I-Lux is the only airfield sign available in half module sizingQuick and economical installation, with smaller excavation, less concrete, and fewer legs to bolt to the padSmaller obstruction in the field than modular signs, presenting less inertial load on aircrafts should a collision occurSeamless panels display messages without distortionHighly impact resistant, up to 30 times more than other brandsNo tools required for re-lampingBase model brightness controls use technology that has been proven for years in the fieldOptional Style U power control system - a passive, non-inductive design that exhibits near- unity power factors on all regulator stepsAvailable in energy saving LED
Size1=Size 12=Size 23=Size 34=Size 45=Size 5
I-----F--
General Catalog Numbers
Example: I-3-2-H-30-SF-1 is a size 3 L-858 I -Lux sign in style 2, with an LED light option, 3.0 modules, single face, mode 2 with an on/off switch
Style2=Style 2 (4.8A-6.6A)3=Style 3 (2.8A-6.6A)4=Style 4 (unlighted)5=Style 5 (5.5A)
Options1=On/Off SwitchS=LED Light Out IndicatorP=View PortE=External Power Cord*
Modules10=1.0 Module15=1.5 Modules20=2.0 Modules25=2.5 Modules30=3.0 Modules35=3.5 Modules40=4.0 Modules
FacesS=Single FaceD=Double Face
L-858 I-LUX Guidance SignsCertified to FAA AC 15/5345-44 (Current Edition) FAA Engineering Brief No. 67, ICAO Annex 14 Sixth Edition, TP312E 4th Edition
Exclusively from AGM, these LED guidance signs are bright, durable and energy efficient
All FAA Sizes, FAA Types and FAA Styles are available in LED
Light OptionG=Coil & Shunt w/ MR16 Lamp (Style 2)G=Coil w/ MR16 Lamp (Style 5)H=LED BoardN=UnlightedU=TapSwitch w/ MR16 Lamp
Mode3=Mode 3(If blank: Mode 2)
Highlights
Guidance Signs
5
Airport Lighting Company · 104 Fairgrounds Drive · Manlius, NY 13104(315) 682-6460 · Fax (315) 682-6469 · airportlightingcompany.com · 11/15
Size Style Modules L-830 Transformer
VA Load
Power Factor
1 2 1.0 65W 39 .93
1 2 1.5 & 2.0 65W 44 .93
1 2 2.5 & 3.0 65W 49 .94
1 2 3.5 & 4.0 65W 54 .94
2 2 1.0 65W 44 .93
2 2 1.5 & 2.0 65W 54 .94
2 2 2.5 & 3.0 65W 65 .94
2 2 3.5 & 4.0 100W 77 .93
3 2 1.0 65W 49 .94
3 2 1.5 & 2.0 65W 65 .94
3 2 2.5 & 3.0 100W 83 .93
3 2 3.5 & 4.0 100W 95 .93
5 2 1.0 65W 49 .94
1 3 1.0 65W 39 .93
1 3 1.5 & 2.0 65W 44 .93
1 3 2.5 & 3.0 65W 49 .94
1 3 3.5 & 4.0 65W 54 .94
2 3 1.0 65W 44 .93
2 3 1.5 & 2.0 65W 54 .94
2 3 2.5 & 3.0 100W 69 .93
2 3 3.5 & 4.0 200W 77 .92
3 3 1.0 65W 49 .94
3 3 1.5 & 2.0 100W 69 .93
3 3 2.5 & 3.0 200W 83 .92
3 3 3.5 & 4.0 200W 95 .92
5 3 1.0 65W 49 .94
1 5 1.0 65W 32 .94
1 5 1.5 & 2.0 65W 34 .94
1 5 2.5 & 3.0 65W 41 .94
1 5 3.5 & 4.0 65W 50 .93
2 5 1.0 65W 34 .94
2 5 1.5 & 2.0 65W 50 .94
2 5 2.5 & 3.0 65W 58 .93
2 5 3.5 & 4.0 100W 69 .93
3 5 1.0 65W 41 .94
3 5 1.5 & 2.0 65W 58 .93
3 5 2.5 & 3.0 100W 73 .93
3 5 3.5 & 4.0 100W 88 .92
5 5 1.0 65W 41 .94
Transformer RequirementsSize Style Modules L-830
TransformerVA
LoadPower Factor
ALL 2 1.0 100W 96 .84
ALL 2 1.5 & 2.0 200W 157 .81
ALL 2 2.5 & 3.0 200W 231 .78
ALL 2 3.5 & 4.0 300W 288 .79
ALL 5 1.0 45W 68 1.0
ALL 5 1.5 & 2.0 100W 117 1.0
ALL 5 2.5 & 3.0 200W 160 1.0
ALL 5 3.5 & 4.0 300W 207 1.0
MR16 Coil & Shunt
LED Board
Size Style Modules L-830 Transformer
VA Load
Power Factor
ALL 2 1.0 100W 85 1.0
ALL 2 1.5 & 2.0 200W 132 1.0
ALL 2 2.5 & 3.0 300W 183 1.0
ALL 2 3.5 & 4.0 500W 225 1.0
ALL 5 1.0 100W 90 1.0
ALL 5 1.5 & 2.0 300W 141 1.0
ALL 5 2.5 & 3.0 500W 185 1.0
ALL 5 3.5 & 4.0 600W2 245 1.02 Use Y-connector to add wattages of two L830s to achieve correct power
MR16 Tapswitch
Replacement PartsLight
OptionPart
Number Description
LED
C7-LVCV2 Low voltage power control module
I7-LEDV2 LED board with optics
C7-DRVR LED driver module
C7-BRG Bridge rectifier
MR16
I7-9Q MR16 lamp
I7-PCM** Power control module
C7-24A Tapswitch (Style U only)
**when ordering, please specify style and number of lamps
Light Option Style L-830 Transformer
VA Load
Power Factor
LED Board 2 65W 49 .94
LED Board 3 65W 44 .94
LED Board 5 65W 44 .94
MR16 Coil & Shunt 2 100W 96 .84
MR16 Coil & Shunt 5 45W 68 1.0
MR16 Tapswitch 2 100W 85 1.0
MR16 Tapswitch 3 100W 90 1.0
I-Lux Size 4
Gui
danc
e Si
gns
6