krossi · the krossi collection is a sit-stand system promoting movement in the workplace. both...
TRANSCRIPT
technical
Krossi
Krossi’s modular design, engineering and material selection is based on Schiavello’s environmentaldesign principals to reduce environmental impact.
Krossi Desking SystemThe Krossi Collection is a sit-stand system promoting movement in the workplace. Both functional and aesthetic, Krossi features height-adjustability, supporting connectivity between people and encouraging flexible ways of working.
Indexdesk bases 02–05bridged clusters 06–07bridge mounted panels 08worktops 09cable reticulation 10–11lettric soft wiring system 12–13tables 14–15desk components - legs 16–19desk accessories 20product specification 21
krossi _01
1200mm max
610mmmin
900mm max
610mmmin
860mm max
610mmmin
720mm720mm
950mm max
700mmmin
1050mm max
700mmmin
1200mm max
610mmmin
900mm max
610mmmin
860mm max
610mmmin
720mm720mm
950mm max
700mmmin
1050mm max
700mmmin
1200mm max
610mmmin
900mm max
610mmmin
860mm max
610mmmin
720mm720mm
950mm max
700mmmin
1050mm max
700mmmin
1200mm max
610mmmin
900mm max
610mmmin
860mm max
610mmmin
720mm720mm
950mm max
700mmmin
1050mm max
700mmmin
1200mm max
610mmmin
900mm max
610mmmin
860mm max
610mmmin
720mm720mm
950mm max
700mmmin
1050mm max
700mmmin
1200mm max
610mmmin
900mm max
610mmmin
860mm max
610mmmin
720mm720mm
950mm max
700mmmin
1050mm max
700mmmin
krossi _02
Desk Basesleg types I height adjustable options I foot styles
Each leg type accommodates varying requirements, offering maximum convenience based upon frequency of adjustment. Height ranges vary with the leg type.
All Krossi legs are available in the Schiavello ColourLab range of metal powder coats.
All legs come standard with Toe Pads fitted. Roller Balls are available upon request for foot leg options only. Roller balls are not available on column legs.
Fixed height leg with rear foot
FOOT STYLESShown on single stage legs with end top castings, compatible with all leg types.The standard desk types shown on page 04 have the relevant foot and top castings included.
Various different foot and top castings can be applied to Krossi legs, these include: mid leg with 700mm centre foot, mid leg with 580mm centre foot, L/H or R/H leg with 700mm rear foot, column legs.
Rear foot 700 mmCentre foot 580 mmCentre foot 700 mm Column leg
Single stage Type A height adjustable leg with rear foot
Dual stage height adjustable leg with rear foot
FLA Type A height adjustable leg with rear foot
Single stage Type B height adjustable leg with rear foot
FLA Type B height adjustable leg with rear foot
950 mmmax860 mm
max
1050 mmmax900 mm
max
1200 mmmax
700 mmmin
610 mmmin
700 mmmin
610 mmmin
720 mm 610 mmmin
KROSSI LEG TYPESFixed height - 720mmSingle stage type A - 610mm to 900mmSingle stage type B - 700mm to 1050mmDual stage - 610mm to 1200mm Aluminium FLA type A (friction lock adjustable) - 610mm to 860mmAluminium FLA type B (friction lock adjustable) - 700mm to 950mm
HEIGHT ADJUSTABLE OPTIONS SINGLE STAGE AND DUAL STAGE LEGS ONLYTechnician height adjustment - without HEx -TA (Each leg adjusts individually with a tool) Mechanical height adjustment mec (Each leg adjusts individually with a tool) Technician height adjustment - with HEx - TAH (All legs connected, single adjustment point requiring tool, no handle) Electronic height adjustment EA (Touch switch activated) FLA height adjustable mech options (FLA legs only) Friction lock adjustable FLA (Each leg adjusts individually with a tool)
TOP CASTINGS (ALL LEGS)End, shared, 120°,90°,90-270° adjustable
TOP CASTINGS (FLA LEGS ONLY): Shared double (2 piece)
mounting channel for cast bridge
locking screwsinside
NO screwson the outside
mounting channel for cast bridge
locking screwsboth sides
locking screwsboth sides
No screws on the outside
Mountingchannel forcast bridge
Locking screwsinside
mounting channel for cast bridge
locking screwsinside
NO screwson the outside
mounting channel for cast bridge
locking screwsboth sides
locking screwsboth sidesLocking screws both sides
Locking screws both sides
Mountingchannel for cast bridge
lower leg
upper leg
bridge/cable tray mounting channel
Front
Krossi FLA (standard leg)
locking screws
Krossi FLA (shared leg)
lower leg
locking screw leg1
bridge/cable tray mounting channel
locking screw leg 2
Back
Front
Backupper leg 2upper leg 1
Locking screwsLower leg
Upper leg
Front
Back
Bridge/cable tray mounting channel
lower leg
upper leg
bridge/cable tray mounting channel
Front
Krossi FLA (standard leg)
locking screws
Krossi FLA (shared leg)
lower leg
locking screw leg1
bridge/cable tray mounting channel
locking screw leg 2
Back
Front
Backupper leg 2upper leg 1Upper leg 1 Upper leg 2
Lower leg
Locking screw leg 2
Locking screw leg 1
Back
Bridge/cable traymounting channel
krossi _03
Top castingKrossi aluminium top castings are strong and light. They come in a range of different configurations allowing for different desk layouts. The standard desk types shown on page 04 have the relevant foot and top castings included.
TOP CASTINGSFor all leg types
TOP CASTINGSOnly FLA leg type
Krossi FLA(standard leg)
Krossi FLA(shared leg)
Desk Basestop castings I toe pads & roller balls I FLA
90°120°end 90-270° adjustableshared shared double (2 piece)only available on FLA leg types
TOE PADS AND ROLLER BALLSToe pads come standard to all Krossi legs. An option for the roller ball is only available on legs with feet.
Toe PadRoller Ball
Front
KROSSI FLA Friction lock adjustable (FLA) legs are an attractive option for providing effective height adjustable desks. FLA height adjustable legs have the option of a shared leg. Shared legs incorporate 2 separate top castings allowing 2 desk ends to be independantly adjusted off one leg.
Every FLA height adjustable leg can be indiviually adjusted and then locked in place with a screw. For standard FLA legs the screw is mounted to the inside wall of the lower leg and for shared FLA legs there are locking screws on both sides.
HEIGHT RANGE Type A 610mm - 860mmType B 700mm - 950mm
All FLA legs feature a channel down the back of the lower leg for the mounting of the cast bridge. FLA legs can be mounted to the same foot types as standard Krossi legs.
LEG STYLES Rear foot 700mmCentre foot 580mmCentre foot 700mmColumn legs
STANDARD LEG TOP CASTINGS End, shared, 120°, 90° and 90-270° adjustable.
SHARED LEG TOP CASTINGS Shared double
ONLY AVAILABLE IN BRIDGED CLUSTERSNOT FOR INDIVIDUAL USE
ONLY AVAILABLE IN BRIDGED CLUSTERSNOT FOR INDIVIDUAL USE
ONLY AVAILABLE IN BRIDGED CLUSTERSNOT FOR INDIVIDUAL USE
ONLY AVAILABLE IN BRIDGED CLUSTERSNOT FOR INDIVIDUAL USE
ONLY AVAILABLE IN BRIDGED CLUSTERSNOT FOR INDIVIDUAL USE
ONLY AVAILABLE IN BRIDGED CLUSTERSNOT FOR INDIVIDUAL USE
krossi _04
Desk Basesdesk configurations
STANDARD DESK CONFIGURATIONSStandard Krossi desk configurations are shown below. Each example has the correct foot and top castings. Electricals, panels, modesty panels, cable trays and other accessories need to be specified to complete theworkstation. All configurations are available to all leg types shown below with single stage legs. Leg type must be specified.
code K/RR
K/RR-Fx
90o Workstationwith narrow return and 2 piece tops
code K/RC
K/RC-Fx
90o Workstationwith deep return and 2 piece tops
code K/C
K/C-Fx
90o Workstation with 1 piece top
code K/U
K/U-Fx
‘U’ configuration
code K/120°
K/120-Fx
120° Workstation
code K/R
K/R-Fx
Rectilinear desk
code K/120-2
K/120-2Fx
120° Workstation 2 leg
code K/120-2
K/BC-120Fx
120° Bridged Cluster
note: only available in bridged clusters, not for individual use
code K/BC-90
K/BC-90Fx
90° Bridged Cluster
note: only available in bridged clusters, not for individual use
krossi_05
code K/R-TA
K/RR-TA
K/RC-TA
K/120-2TA
K/BC-90TA
code K/R-UA
K/RR-UA
K/RC-UA
K/C-UA
K/U-UA
code K/R-MEC
K/RR-MEC
K/RC-MEC
K/C-MEC
K/U-MEC
code K/R-TAH
K/RR-TAH
K/RC-TAH
K/C-TAH
K/U-TAH
code K/R-EA
K/RR-EA
K/RC-EA
K/C-EA
K/U-EA
code K/C-TA
K/U-TA
K/120-TA
K/BC-120TA
code K/120-UA
K/120-2UA
K/BC-120UA
K/BC-90UA
code K/120-MEC
K/120-2MEC
K/BC-120MEC
K/BC-90MEC
code K/120-TAH
K/120-2TAH
K/BC-120TAH
K/BC-90TAH
code K/120-EA
K/120-2EA
K/BC-120EA
K/BC-90EA
Desk Bases I Bridgestechnician I mechanical I FLA I electronic I cast bridges
code K/C-FLA
K/U-FLA
K/120-FLA
code K/R-FLA
K/RR-FLA
K/RC-FLA
TECHNICIAN HEIGHT ADJUSTMENT - without HEX - TA(each leg adjusts individually with a tool)(measurments based on a 25mm worksurface)Standard adjustment range Single stage type A: 610mm - 900mm Standard adjustment range Single stage type B: 700mm - 1050mm Standard adjustment range Dual stage: 610mm - 1200mmSpecify leg type at time of order, not available with FLA legs.
MECHANICAL HEIGHT ADJUSTMENT - MEC(each leg adjusts individually with a tool)(measurments based on a 25mm worksurface)Standard adjustment range Single stage type A: 610mm - 900mm Standard adjustment range Single stage type B: 700mm - 1050mm Standard adjustment range Dual stage: 610mm - 1200mmSpecify leg type at time of order, not available with FLA legs.
FRICTION LOCK ADJUSTMENT - without HEX - FLA(each leg adjusts individually with a tool)(measurments based on a 25mm worksurface)Standard adjustment range FLA type A: 610mm - 860mmStandard adjustment range FLA type B: 700mm - 950mmMust specify height adjustable leg type, FLA legs only.
USER HEIGHT ADJUSTMENT - UA(single wind up handle) (measurments based on a 25mm worksurface)Standard adjustment range Single stage type A: 610mm - 900mm Standard adjustment range Single stage type B: 700mm - 1050mm Standard adjustment range Dual stage: 610mm - 1200mmSpecify leg type at time of order, not available with FLA legs.
TECHNICIAN HEIGHT ADJUSTMENT - with HEX - TAH(all legs are connected - single adjustment point requiring tool - no handle) (measurments based on a 25mm worksurface)Standard adjustment range Single stage type A: 610mm - 900mm Standard adjustment range Single stage type B: 700mm - 1050mm Standard adjustment range Dual stage: 610mm - 1200mmSpecify leg type at time of order, not available with FLA legs.
ELECTRONIC HEIGHT ADJUSTMENT - EA(touch switch adjustment) (measurments based on a 25mm worksurface)Standard adjustment range Single stage type A: 610mm - 900mm Standard adjustment range Single stage type B: 700mm - 1050mm Standard adjustment range Dual stage: 610mm - 1200mmSpecify leg type at time of order, not available with FLA legs.
Bridge mounting block
Bridge mounting block
Bridge mounting block
800mm
600mm
430mm
450mm
800 mm
430 mm
600 mm
450 mm
CAST BRIDGESWhen desks are back to back, a connecting bridge completes the unique H-Leg frame. This design eliminates the need for supporting feet which results in less clutter beneath the desk and greater usable storage space, along with a clean open aesthetic. The bridge can also act as a panel and cable tray support.
Each desk in the cluster can either be fixed height or height adjustable. Height adjustable desks have options of technician, mechanical, user, FLA or electronic adjustment.
Krossi cast bridges come in two lengths. A full bridge 600mm long is used for back to back applications and a half bridge of 250mm is for individual workstation use. Bridges come as an end or pass through to support cable trays. (see page 20 for the full range of bridges)
CAST BRIDGE MOUNTINGFull (600mm) cast bridges attach to both legs, Half (250mm) cast bridges attach to one leg only.See page 20 for the available bridges.
CAST BRIDGE MOUNTING TO FLA LEGS - FIXED HEIGHT AND HEIGHT ADJUSTABLE.With FLA legs cast bridges fix to the 2 chanels at the back of the leg and lock in place with 2 screws. The chanel comes standard on all FLA and aluminium legs.
CAST BRIDGE MOUNTING TO STANDARD LEGS - SINGLE STAGE, DUAL STAGE AND FIXED HEIGHT LEGS.When mounting cast bridges to standard Krossi legs a mounting block is fitted to the back of the leg.
brideged_clustes3D.ai
brideged_clustes3D.ai
krossi _06
Bridged Clustersrectilinear desks I 120° workstations I 90° workstations
RECTILINEAR DESKSMaximum worktop size 2400mm x 800mm.Each worksurface is individually supported.
Possible overhangs shown for each width on page 9.All desks are either fixed height or height adjustable and each desk is independently height adjustable in any mode.
Suitable with all leg types.
120° 3-WAY WORKSTATION (standard)Maximum one piece top size 1350 mm x 1350 mm.Possible overhangs shown for each width on page 9.
120° 3-WAY WORKSTATION (circular)Maximum one piece top size 1200 mm x 1200 mm.Possible overhangs shown for each width on page 9.
90° 4-WAY WORKSTATION (circular)Maximum one piece top size 1200 mm x 1200 mm.Possible overhangs shown for each width on page 9.
STANDARD BRIDGED CLUSTERS
3 way centre junction.See page 20 for details
brideged_clustes3D.ai
brideged_clustes3D.ai
krossi _07
Bridged Clusters90° workstations I larger clusters
90° 2-WAY WORKSTATIONMaximum one piece top size 2400 mm x 1800 mm.Possible overhangs shown for each width on page 9.
90° 4-WAY WORKSTATIONMaximum one piece top size 2400 mm x 1800 mm.Possible overhangs shown for each width on page 9.
SHARED LEGSFLA and fixed height legs offer a shared leg solution. which reduces the number of components and in turn reduces cost. With fewer legs a cleaner less complicated visual is achieved that provides the maximum amount of free leg space.
4 way centre junctionsee page 20 for details
FLA Type A - 610mm to 860mm
Fixed hieght - 720mm
600mm high panel
900mm high panel
1200mm high panel1200 mm high panel
900 mm high panel
600 mm high panel
Supplied in pairs
code K/BPB
krossi _08
CABLE TRAYS - BRIDGE SPECIFICATIONBridges come in two styles, machined and solid:
Pass through bridges allow cables to be fed through them. A centre bridge joiner is then added to connect the two trays and fill the space between the two pass through bridges.
End bridges are used at the end of a run to seal off the cable tray. Both bridges are supplied in a powder coated finish from the Schiavello ColourLab range. Bridges can be specified to suit standard legs or FLA.
End bridge
Centre bridge joiner
End bridge
End bridgePass through bridge
End bridgePass through bridge
Pass through bridgePass through bridge
Bridge Mounted Panels I Cable Reticulation I Desking Components - legs/bridgesBridge panel clamp bracket I cable tray & bridge specification
CAST BRIDGE PANEL CLAMP BRACKET (12MM-45MM)The Krossi cast bridge panel clamp bracket is a powder coated cast zinc bracket designed for use with panels from 12mm to 45 mm thick.Bridge mounted panels are not height adjustable and their length must span from bridge to bridge. Only compatible with cast bridges. Cast bridge panel clamp brackets can be used to mount panels on all leg types.
Krossi FLA with Vide panel, cable tray and cast bridges
2400mm -1800mmmax 300mm
1650mmmax 250mm
1500mmmax 200mm
krossi _09
Standard worktops can be specified 25 mm or 33 mm thick with square or soft rounded corners (50 mm radius). Available finishes include selected laminates, powder coated MDF and timber veneers in a range of colours, from the Schiavello ColourLab range. Custom edge profiles and finishes are also available upon request, offering vast design possibilities.
STANDARD WORKTOPS
CORNER FINISH OPTIONS EDGE OPTIONS
Worktopsstandard worktops I corner finish options I edge options I worktop overhangs
WORKTOP OvERHANGSDesk legs can be positioned to allow a worktop end overhang. This creates a clear space below for placement of a pedestal or other large items. The maximum overhang for a 25 mm thick top is illustrated below.
Rectilinear
1650 mm
1350 mm
800 mm750 mm
1500 mm
1200 mm
800 mm
2400-1800 mm 1650 mm 1500 mm
max 300 mm max 250 mm max 200 mm
1800 mm 1800 mm 1800 mm
25 mm 25 mm
33 mm 33 mm17 mm
12 mm
2400 mm
1800 mm
800 mm750 mm
2100 mm
1500 mm
90° 90° Radial 120° Radial
1650 mm
1800 mm
1350 mm
800 mm750 mm
1500 mm
1200 mm
120°
800 mm750 mm
2400 mm
1800 mm
2100 mm
Rectilinear
600 mm
1200 mm
Desk Return
Square corners 50 mm radius to front corners 50 mm radius to all corners Square Sharknose
12mm25mm
17mm33mm
25mm
33mm
1800mm1800mm 1800mm
800mm
1800mm
2100mm
2400mm
800mm750mm 600mm
1200mm
800mm750mm
1500mm
1650mm
1800mm
1200mm
1350mm1800mm
2100mm
2400mm
1500mm
800mm750mm
800mm750mm
1500mm
1650mm
1200mm
1350mm
1800mmmax 300mm
2100mmmax 400mm
1650mmmax 250mm
1650mmmax 200mm
2400mmmax 450mm
2400mmmax 450mm
Rectilinear Rectilinear Desk Return
90 120
1200mm
1350mm
90 Radial
1200mm
1350mm
120 Radial
1200 mm
1350 mm
12mm25mm
17mm33mm
25mm
33mm
1800mm1800mm 1800mm
800mm
1800mm
2100mm
2400mm
800mm750mm 600mm
1200mm
800mm750mm
1500mm
1650mm
1800mm
1200mm
1350mm1800mm
2100mm
2400mm
1500mm
800mm750mm
800mm750mm
1500mm
1650mm
1200mm
1350mm
1800mmmax 300mm
2100mmmax 400mm
1650mmmax 250mm
1650mmmax 200mm
2400mmmax 450mm
2400mmmax 450mm
Rectilinear Rectilinear Desk Return
90 120
1200mm
1350mm
90 Radial
1200mm
1350mm
120 Radial
1200 mm
1350 mm
125mm 200mm
70mm 70mm
125mm
68mm
250mm
68mm krossi _10
CABLE TRAYS (optional)
Krossi desking offers optional cable trays that can mount off a single desk or between bridges. Cables can enter trays from power poles, power blades, umbilicals, wall or floor connections.
CABLE TRAYS - SEGREGATED ALUMINIUMLettric power and data modules clip into the top of the 2-channel segregated cable tray. Maximum length 3000 mm, finished in a metal powder coat from the Schiavello ColourLab range.
CLICK CABLE TRAY WITH CLIP ON COvERClick cable trays are available in a single or double channel and feature a clip on modular covers. The trays mount between Krossi bridges and can have a range of cutouts allowing for umbilicals, power and data to be accomodated.
Contact Schiavello for the full range of sizes and configurations.Finished in a metal powder coat from the Schiavello ColourLab range.
CABLE TRAYS - STEELLettric power and data modules are mounted via a punchout to the front, 70 mm from the face of the tray.Standard punching is to the centre of the tray, offset punching available upon request.Maximum length 3000 mm, finished in a metal powder coat from the Schiavello ColourLab range.
Cable Reticulationcable trays I steel trays I aluminium trays I click trays
The double Click tray includes a centre divider as shown
Outlets can be mounted to the cover trays or side walls of Click cable trays
A range of different cutouts can be incorporated with Click cable trays
70 mm
Lettric face mounted power module
Lettric datamodule
125 mm
Double Trayno punchout
Double Tray2 sided punchout
Single Trayno punchout
Single Tray1 sided punchout
Single Tray
70 mm 70 mm
125 mm 200 mm
Double Tray Single Tray with Lettric Face Mounted Power Module
Segregated TraySegregated Tray Segregated Tray with
Lettric Power Module
125mm 200mm
70mm 70mm
125mm
68mm
250mm
68mm
Single Click tray
125 mm
68 mm
Double Click tray
68 mm
250 mm
krossi _11
Cable Reticulationpower blades I umbilical I technology column I inline vertical duct
Cable routing - E45E45 ducted panels offer a number of cable routing options that complement Krossi desking. They can be combined to satisfy specific requirements while always providing easy access and efficient cable management throughout entire layouts. Cables can be routed to panels from ceiling, walls or floors by utilising umbilicals, power blades, power poles or the inline duct.
POWER BLADESAccess from ceiling or floor. Lengths to order. Specify required length and colour.
UMBILICALThe umbilical feeds cabling to the cable tray from ceilings or floors.Specify required length and colour.
TECHNOLOGY COLUMN120° Lettric Technology Column with umbilical above. Technology Column is available in Schiavello ColourLab powder coat range. Please see the Lettric Technology Column technical manual for full details of sizing and outlet configurations.
INLINE vERTICAL DUCTDirect access via removable duct cover.Power and data cabling can be accessed via ceilings, floors and skirtings.Service outlets visible, mounted to duct face.Please specify cabling requirements, adjoining panels and ceiling heights.
300 mm or600 mm wide
Floor to ceiling
Cable tray
Height as required
Height as required
Umbilical
Cable tray
Umbilical
TechnologyColumn
Technology column
Height as required
Power / data outlets
Specify cabling requirements and adjoining panel heights
Removable Duct Cover
200 mm
45 mm
Panels attach with standard wallstarter
Cables exit powerBlade and enter cable tray
Cables exit power blade through access holes
krossi _12Timber gate
Timber gate
IN-DESK SERvICE MODULEPlease see Lettric Softwiring Catalogue for a comprehensive list of products.
BELOW DESK SERvICE MODULEPlease see Lettric Softwiring Catalogue for a comprehensive list of products.
ABOvE DESK SERvICE MODULEPlease see Lettric Softwiring Catalogue for a comprehensive list of products.
OUTLET HOUSING MODULEPlease see Lettric Softwiring Catalogue for a comprehensive list of products.
INTERGRATED FLIP LIDUses a flip lid with cutout.
Lettric Softwiring Systemin-desk I below desk I above desk I outlet housing I intergrated flip lid
code IDM-2P-OD (2 GPO)
IDM-4P-OD (4 GPO)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
code BDM-2P-OD (2 GPO)
BDM-4P-OD (4 GPO)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
code ADM-2P-OD (2 GPO)
ADM-2P-2D (2 GPO + 2 DATA)
ADM-4P-0D (4 GPO)
ADM-4P-2D (4 GPO + 2 DATA)
ADM-2P-4D (2 GPO + 4 DATA)
ADM-4P-4D (4 GPO + 4 DATA)
code OHM-2P-OD (2 GPO)
OHM-2P-2D (2 GPO + 2 DATA)
code LEC-UCS-P4[R]-D4 (4 GPO + 4 DATA)
code F-IFL
Lettric undercarriage - single sided
Complete integrated flip lid + lettric undercarriageFlip lid
krossi _13
Lettric Softwiring Systemconnectors I tiles I power modules I excess cables
Lettric Softwiring SystemSchiavello’s Lettric softwiring system delivers power and lighting to workstations. The system is easily connected, disconnected or relocated without the need to isolate power and with minimal inconvenience. All connections within systems are protected by a positive lock mechanism to prevent accidental power disconnection.
There are numerous outlet combinations available for each option. Refer to Schiavello Lettric softwiring catalog for complete product information and technical specification.
SOFTWIRING CONNECTORSPlease see Lettric Softwiring Catalogue for a comprehensive list of products.
TILESPlease see Lettric Softwiring Catalogue for a comprehensive list of products.
POWER MODULESPlease see Lettric Softwiring Catalogue for a comprehensive list of products.
EXCESS CABLESExcess cables can be taken off the desk with either a cutout or a cable port.
code LEC-Ex
code LEC-SS
code LEC-BL
code LEC-PM2
code LEC-PM4
code LEC-Ex-AS
code LEC-TP
code LEC-D1
code LEC-PM2R
code LEC-PM4R
code LEC-Ex-CC
code LEC-JB
code LEC-D2
code LEC-PM2-FM
code LEC-PM4-FM
code LEC-Ex-AS-CC
code LEC-JB
code LEC-BL-DBL
code LEC-PM2R-FM
code LEC-PM4R-FM
code LEC-D2-AF
Standard Cutout Must be specified with the worksurface
12mm25mm
17mm33mm
25mm
33mm
20.5mm25mm
26mm33mm
60mm Cable port Must be specified with the worksurface
566
250 45
800 mm
1600 mm
900 mm
2000 mm
900 mm
1600 mm
900 mm
1800 mm
900 mm
2200 mm
900 mm
2600 mm
1300 mm
2400 mm
1300 mm
2700 mm
1300 mm
3000 mm
krossi _14
Rectilinear Meeting and Boardroom TablesT-Leg I column leg I bridge column leg
code KBT-16.9-TF
KBT-16.9-TL
KBT-16.9-TH
code KBT-18.9-TF
KBT-18.9-TL
KBT-18.9-TH
code KBT-24.13-CF
KBT-24.13-CL
KBT-24.13-CH
code KBT-20.9-TF
KBT-20.9-TL
KBT-20.9-TH
code KBT-27.13-CF
KBT-27.13-CL
KBT-27.13-CH
code KBT-22.9-TF
KBT-22.9-TL
KBT-22.9-TH
code KBT-30.13-CF
KBT-30.13-CL
KBT-30.13-CH
code KBT-24.9-TF
KBT-24.9-TL
KBT-24.9-TH
code KBT-26.9-TF
KBT-26.9-TL
KBT-26.9-TH
Rectilinear Meeting and Boardroom TablesKrossi rectilinear tables feature highly rigid cast and steel beam understructures. Table tops offer many variations for style and finishes as well as optional built-in power/data service outlets.
Krossi tables are available in a range of leg styles; column and T-leg. Meeting tables are available in fixed height and single stage height adjustability; type A or type B height range.
FOOT(shown 2400 mm x 900 mm)
COLUMN LEG(shown 2700 mm x 1300 mm)
Fixed height Height adjustable
Fixed height Height adjustable
720 mmtype A 610 - 900 mmtype B 700 - 1050 mm
720 mmtype A 610 - 900 mmtype B 700 - 1050 mm
BRIDGE COLUMN LEGS(shown 6000 mm x 1600 mm)
code KBT-60.16-BF
KBT-60.16-BL
KBT-60.16-BH
code KBT-48.16-BF
KBT-48.16-BL
KBT-48.16-BH
code KBT-54.16-BF
KBT-54.16-BL
KBT-54.16-BH
1600 mm
4800 mm
1600 mm
5400 mm
1600 mm
6000 mm
Fixed height Height adjustable
720 mmtype A 610 - 900 mmtype B 700 - 1050 mm
krossi _15
Round Tablesfixed height
code KRS/TL4-4 (450 mm)code KRS/TL4-3 (350 mm)
code KRS/TL1-12 (1200 mm)
KRS/TL1-13 (1350 mm)
KRS/TL1-15 (1500 mm)
code KRS/TL2-9 (900 mm)
code KRS/TL2-10 (1000 mm)
code KRS/TL2-10H (1000 mm)
Krossi Fixed Height Round Tables offers a choice of 4 different cast aluminium bases creating a diverse range of table sizes able to accommodate many applications.
Round Table Bases are of an all metal construction making them strong and durable. Available in your choice of colour from the Schiavello ColourLab powder coat range.
Tops are available in laminate, powder coat and veneer.
Roller Balls are not available with round table bases.
FIXED HEIGHT 6 STAR BASE1000 mm diameter base
FIXED HEIGHT 5 STAR BASE800 mm diameter base
FIXED HEIGHT 4 STAR BASE650 mm diameter base
FIXED HEIGHT 4 STAR BASE350 mm diameter base
Height - 720 mm 1500 mm ø1350 mm ø1200 mm ø
Height - 720 mm Height - 1000 mm
1000 mm ø 1000 mm ø 900 mm ø
height - 720 mm Height - 1000 mm code KRS/TL3-8 (800 mm)
800 mm ø
code KRS/TL3-7 (750 mm)
750 mm ø
code KRS/TL3-6 (650 mm)
650 mm ø
Height - 350 mm
Height - 350 mm height - 450 mm
450 mm ø350 mm ø
single_legs.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs_FLA.ai
single_legs_FLA.ai
single_legs_FLA.ai
single_legs_FLA.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs_FLA.ai
single_legs ss type 2.ai
single_legs ss type 2.ai
single_legs ss type 2.ai
single_legs ss type 2.ai
single_legs ss type 2.ai
single_legs_FLA_2.ai
single_legs_FLA_2.ai
single_legs_FLA_2.ai
single_legs_FLA_2.ai
single_legs_FLA_2.ai
krossi _16
Desking Components – Legsend top castings I shared top castings
SINGLE STAGE HEIGHT ADJUSTABLE LEGS (TYPE A)Height range 610 mm - 900 mm nb: specify left or right hand specify bridge block if required
SINGLE STAGE HEIGHT ADJUSTABLE LEGS (TYPE B)Height range 700 mm - 1050 mm nb: specify left or right hand specify bridge block if required
DUAL STAGE HEIGHT ADJUSTABLE LEGSHeight range 610 mm - 1200 mmnb: specify left or right handspecify bridge block if required
FIXED HEIGHT LEGSFixed height - 720mmnb: specify left or right handspecify bridge block if required
FLA HEIGHT ADJUSTABLE LEGS (TYPE A)Height range 610mm - 860mmnb: specify left or right hand
SHARED TOP CASTINGS
END TOP CASTINGS
FLA HEIGHT ADJUSTABLE LEGS (TYPE B)Height range 700mm - 950mmnb: specify left or right hand
700mm Foot
KRS/SS-LF-MID-Leg-UAKRS/SS-LF-MID-Leg-TAKRS/SS-LF-MID-Leg-EA
KRS/SS-LF-MID-Leg-MEC
code
KRS/SS-C-Leg-UAKRS/SS-C-Leg-TAKRS/SS-C-Leg-EAKRS/SS-C-Leg-MEC
code
700mm Foot
KRS/SS-LF-180-Leg-UAKRS/SS-LF-180-Leg-TAKRS/SS-LF-180-Leg-EA
KRS/SS-LF-180-Leg-MEC
code
700mm Foot
KRS/SS-LF-Leg-UAKRS/SS-LF-Leg-TAKRS/SS-LF-Leg-EA
KRS/SS-LF-Leg-MEC
code
700mm Foot
KRS/SS7-LF-MID-Leg-UAKRS/SS7-LF-MID-Leg-TAKRS/SS7-LF-MID-Leg-EA
KRS/SS7-LF-MID-Leg-MEC
code
KRS/SS7-C-Leg-UAKRS/SS7-C-Leg-TAKRS/SS7-C-Leg-EAKRS/SS7-C-Leg-MEC
code
700mm Foot
KRS/SS7-LF-180-Leg-UAKRS/SS7-LF-180-Leg-TAKRS/SS7-LF-180-Leg-EA
KRS/SS7-LF-180-Leg-MEC
code
700mm Foot
KRS/SS7-LF-Leg-UAKRS/SS7-LF-Leg-TAKRS/SS7-LF-Leg-EAKRS/SS7-LF-Leg-MEC
code
700mm Foot
KRS/SS-LF-MID-Leg-FLA
code
KRS/SS-C-Leg-FLA
code
700mm Foot
KRS/SS-LF-180-Leg-FLA
code
KRS/SS-LF-Leg-FLA
700mm Footcode
700mm Foot
KRS/DS-LF-MID-Leg-UAKRS/DS-LF-MID-Leg-TAKRS/DS-LF-MID-Leg-EAKRS/DS-LF-MID-Leg-MEC
code
KRS/DS-C-Leg-UAKRS/DS-C-Leg-TAKRS/DS-C-Leg-EAKRS/DS-C-Leg-MEC
code
700mm Foot
KRS/DS-LF-180-Leg-UAKRS/DS-LF-180-Leg-TAKRS/DS-LF-180-Leg-EA
KRS/DS-LF-180-Leg-MEC
code
700mm Foot
KRS/DS-LF-Leg-UAKRS/DS-LF-Leg-TAKRS/DS-LF-Leg-EA
KRS/DS-LF-Leg-MEC
code
700mm Foot
KRS/SS7-LF-MID-Leg-FLA
code
KRS/SS7-C-Leg-FLA
code
KRS/SS7-LF-180-Leg-FLA
700mm Footcode
KRS/SS7-LF-Leg-FLA
700mm Footcode
700mm Foot
KRS/LF-MID-Leg-Fx
code
KRS/C-Leg-Fx
code
KRS/LF-180-Leg-Fx
700mm Footcode
KRS/LF-Leg-Fx
700mm Footcode
580mm Foot
KRS/SS7-SF-MID-Leg-FLA
code580mm Foot
KRS/SS-SF-MID-Leg-FLA
code580mm Foot
KRS/SF-MID-Leg-Fx
code580mm Foot
KRS/DS-SF-MID-Leg-UAKRS/DS-SF-MID-Leg-TAKRS/DS-SF-MID-Leg-EAKRS/DS-SF-MID-Leg-MEC
code580mm Foot
KRS/SS7-SF-MID-Leg-UAKRS/SS7-SF-MID-Leg-TAKRS/SS7-SF-MID-Leg-EAKRS/SS7-SF-MID-Leg-MEC
code580mm Foot
KRS/SS-SF-MID-Leg-UAKRS/SS-SF-MID-Leg-TAKRS/SS-SF-MID-Leg-EAKRS/SS-SF-MID-Leg-MEC
code
single_legs.ai
single_legs.ai
single_legs.ai
single_legs_FLA.aisingle_legs ss type 2.ai
single_legs_FLA_2.ai
single_legs_FLA.ai single_legs_FLA_2.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs_FLA.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs_FLA.ai
single_legs.ai
single_legs.ai
single_legs.ai
single_legs_FLA.ai
single_legs ss type 2.ai
single_legs ss type 2.ai
single_legs ss type 2.ai
single_legs_FLA_2.ai
single_legs_FLA_2.ai
single_legs_FLA.ai
krossi _17
Desking Components – Legsshared top castings I 90° top castings I 120° top castings
SINGLE STAGE HEIGHT ADJUSTABLE LEGS (TYPE A)Height range 610mm - 900mmnb: specify left or right handspecify bridge block if required
SINGLE STAGE HEIGHT ADJUSTABLE LEGS (TYPE B)Height range 700mm - 1050mmnb: specify left or right handspecify bridge block if required
DUAL STAGE HEIGHT ADJUSTABLE LEGSHeight range 610mm - 1200mmnb: specify left or right handspecify bridge block if required
FIXED HEIGHT LEGSFixed height - 720mmnb: specify left or right handspecify bridge block if required
FLA HEIGHT ADJUSTABLE LEGS (TYPE A)Height range 610mm - 860mmnb: specify left or right hand
FLA HEIGHT ADJUSTABLE LEGS (TYPE B)Height range 700mm - 950mmnb: specify left or right hand
KRS/SS-C-Leg-180-UAKRS/SS-C-Leg-180-TAKRS/SS-C-Leg-180-EAKRS/SS-C-Leg-180-MEC
code
KRS/SS-C-Leg-90-UAKRS/SS-C-Leg-90-TAKRS/SS-C-Leg-90-EAKRS/SS-C-Leg-90-MEC
code
KRS/SS-C-Leg-120-UAKRS/SS-C-Leg-120-TAKRS/SS-C-Leg-120-EAKRS/SS-C-Leg-120-MEC
code
580mm Foot
KRS/SS-SF-MID-180-Leg-UAKRS/SS-SF-MID-180-Leg-TAKRS/SS-SF-MID-180-Leg-EAKRS/SS-SF-MID-180-Leg-MEC
code
KRS/SS7-C-Leg-180-UAKRS/SS7-C-Leg-180-TAKRS/SS7-C-Leg-180-EAKRS/SS7-C-Leg-180-MEC
code
KRS/DS-C-Leg-90-UAKRS/DS-C-Leg-90-TAKRS/DS-C-Leg-90-EAKRS/DS-C-Leg-90-MEC
code
KRS/SS7-C-Leg-120-UAKRS/SS7-C-Leg-120-TAKRS/SS7-C-Leg-120-EAKRS/SS7-C-Leg-120-MEC
code
KRS/SS-C-Leg-180-FLA
code
KRS/SS-C-Leg-90-FLA
code
KRS/SS-C-Leg-120-FLA
code
KRS/SS-SF-MID-180-Leg-FLA
580mm Footcode
KRS/DS-C-Leg-180-UAKRS/DS-C-Leg-180-TAKRS/DS-C-Leg-180-EAKRS/DS-C-Leg-180-MEC
code
KRS/DS-C-Leg-UAKRS/DS-C-Leg-TAKRS/DS-C-Leg-EAKRS/DS-C-Leg-MEC
code
KRS/DS-C-Leg-120-UAKRS/DS-C-Leg-120-TAKRS/DS-C-Leg-120-EAKRS/DS-C-Leg-120-MEC
code
KRS/DS-SF-MID-180-Leg-UAKRS/DS-SF-MID-180-Leg-TAKRS/DS-SF-MID-180-Leg-EAKRS/DS-SF-MID-180-Leg-MEC
580mm Footcode
KRS/SS-7-C-Leg-180-FLA
code
KRS/SS7-C-Leg-90-FLA
code
KRS/SS7-C-Leg-120-FLA
code
KRS/SS7-SF-MID-180-Leg-FLA
580mm Footcode
KRS/C-Leg-180-Fx
code
KRS/C-Leg-90-Fx
code
KRS/C-Leg-120-Fx
code
KRS/SF-MID-180-Leg-Fx
580mm Footcode
700mm Foot
KRS/7-LF-MID-180-Leg-FLA
code700mm Foot
KRS/SS-LF-MID-180-Leg-FLA
code700mm Foot
KRS/LF-MID-180-Leg-Fx
code700mm Foot
KRS/DS-LF-MID-180-Leg-UAKRS/DS-LF-MID-180-Leg-TAKRS/DS-LF-MID-180-Leg-EAKRS/DS-LF-MID-180-Leg-MEC
code700mm Foot
KRS/SS7-LF-MID-180-Leg-UAKRS/SS7-LF-MID-180-Leg-TAKRS/SS7-LF-MID-180-Leg-EAKRS/SS7-LF-MID-180-Leg-MEC
code700mm Foot
KRS/SS-LF-MID-180-Leg-UAKRS/SS-LF-MID-180-Leg-TAKRS/SS-LF-MID-180-Leg-EAKRS/SS-LF-MID-180-Leg-MEC
code
90° TOP CASTINGS
120° TOP CASTINGS
90° TOP CASTINGS
120° TOP CASTINGS
KRS/SS7-SF-MID-180-Leg-UAKRS/SS7-SF-MID-180-Leg-TAKRS/SS7-SF-MID-180-Leg-EAKRS/SS7-SF-MID-180-Leg-MEC
code 580mm Foot
single_legs.ai
single_legs.ai
single_legs.ai
single_legs_FLA.aisingle_legs ss type 2.ai
single_legs_FLA_2.ai
single_legs_FLA.aisingle_legs_FLA.aisingle_legs_FLA.aisingle_legs_FLA.ai
single_legs_FLA_2.aisingle_legs_FLA_2.aisingle_legs_FLA_2.aisingle_legs_FLA_2.ai
krossi _18
Desking Components – Legs/Bridges90°-270° adjustable top castings I FLA shared legs I half bridges
SINGLE STAGE HEIGHT ADJUSTABLE LEGS (TYPE A)Height range 610mm - 900mmnb: specify left or right handspecify bridge block if required
SINGLE STAGE HEIGHT ADJUSTABLE LEGS (TYPE B)Height range 700mm - 1050mmnb: specify left or right handspecify bridge block if required
DUAL STAGE HEIGHT ADJUSTABLE LEGSHeight range 610mm - 1200mmnb: specify left or right handspecify bridge block if required
FIXED HEIGHT LEGSFixed height - 720mmnb: specify left or right handspecify bridge block if required
FLA HEIGHT ADJUSTABLE LEGS (TYPE A)Height range 610mm - 860mmnb: specify left or right hand
FLA HEIGHT ADJUSTABLE LEGS (TYPE B)Height range 700mm - 950mmnb: specify left or right hand
KRS/SS-C-Leg-120-UAKRS/SS-C-Leg-120-TAKRS/SS-C-Leg-120-EAKRS/SS-C-Leg-120-MEC
code
KRS/C-Leg-120-FLA
code
KRS/DS-C-Leg-120-UAKRS/DS-C-Leg-120-TAKRS/DS-C-Leg-120-EAKRS/DS-C-Leg-120-MEC
code
KRS/7-C-Leg-120-FLA
code
KRS/C-Leg-120-Fx
code
KRS/SS7-C-Leg-120-UAKRS/SS7-C-Leg-120-TAKRS/SS7-C-Leg-120-EAKRS/SS7-C-Leg-120-MEC
code
90° - 270° ADJUSTABLE TOP CASTINGS
code KRS/SS-C-SHR-Leg-FLA
Column
code KRS/SS7-C-SHR-Leg-FLA
Column
code KRS/BR2-FL-SR
FLA mounting, solid bridge
250mm bridge FLA
code KRS/BR2-FL-SL
FLA mounting, solid bridge
250mm bridge FLA
code KRS/BR2-FL-MR
FLA mounting, machined bridge
250mm bridge FLA
code KRS/BR2-FL-ML
FLA mounting, machined bridge
250mm bridge FLA
code KRS/BR2-ST-SR
Standard mounting, solid bridge
250mm bridge STD
code KRS/BR2-ST-SL
Standard mounting, solid bridge
250mm bridge STD
code KRS/BR2-ST-MR
Standard mounting, machined bridge
250mm bridge STD
code KRS/BR2-ST-ML
Standard mounting, machined bridge
250mm bridge STD
code KRS/SS-LF-SHR-Leg-FLA
700 mm Foot
code KRS/SS7-LF-SHR-Leg-FLA
700 mm Foot
code KRS/SS-LF-MID-SHR-Leg-FLA
700 mm Mid Foot
code KRS/SS7-LF-MID-SHR-Leg-FLA
700 mm Mid Foot
code KRS/SS-SF-MID-SHR-Leg-FLA
580 mm Mid Foot
code KRS/SS7-SF-MID-SHR-Leg-FLA
580 mm Mid Foot
FLA SHARED LEGS TYPE AHeight range 610 mm - 860 mm
FLA SHARED LEGS TYPE BHeight range 700 mm - 950 mm
HALF BRIDGES 250 mm cast bridgesCast metal bridges Powder coated from Schiavello ColourLab range
RIGHT HANDED
LEFT HANDED
code S45/PNL-LCK-GUIDE
Panel locking guide. (Unhanded)(Holds panels against adjustable height work surface).
krossi _19
Desking Componentsfull bridges I center junction assemlies
code KRS/CBJ-2W
Center Bridge Joiner
code KRS/CJ-4W
4w Center Junction
code KRS/CJ-3W
3w Center Junction
code PLG 30/45
Panel Locking Guide
FULL BRIDGES600 mm cast bridgesCast metal bridges Powder coated from Schiavello ColourLab range
CENTRE JUNCTION ASSEMBLIES FOR BRIDGED CLUSTERSUmbilical mounting plates can be set to the top or bottom for floor or ceiling feeds.
PANEL LOCKING GUIDEThe panel locking guide slides into the vetical transom of System 30, 45 and E45 panels and is then screwed to the underside of the worksurface.The panel locking guide ties the worksurface to the panel while still allowing the worksurface to travel up and down.
code KRS/BR6-FL/FL-S
FLA leg mount both ends, solid bridge
600mm bridge FLA-FLA
code KRS/BR6-FL/FL-M
FLA leg mount both ends, machined
600mm bridge FLA-FLA
code KRS/BR6-FL/ST-S
Standard leg mount one end, FLA other, right handed, solid bridge
600mm bridge FLA-STD
code KRS/BR6-FL/ST-M
FLA leg mount one end, standard other, right handed, machined bridge
600mm bridge FLA-STD
code KRS/BR6-ST/FL-S
Standard leg mount one end, FLA other, left handed, solid bridge
600mm bridge STD-FLA
code KRS/BR6-ST/FL-M
Standard leg mount one end, FLA other, left handed , machined bridge
600mm bridge STD-FLA
code KRS/BR6-ST/ST-S
Standard leg mount both ends, solid bridge
600mm bridge STD-STD
code KRS/BR6-ST/ST-M
Standard leg mount both ends machined bridge
600mm bridge STD-STD
krossi _20
Desk Accessoriesbag hook
Bag hook
code KBH
63
100
40
44
180 degree movement
BAG HOOKThe bag hook can swing out from under the workstation edge, extending out to suspend handbags, laptop bags and other items.
The cast aluminium bag hook is offered in black or white powder coat and can attach to any area under a workstation top. Made of 3 castings that allow a 180° rotation of the hook tongue, the bag hook can hold up to 20 kg.
krossi _21
GENERALKrossi is a fully refined office desking and table system manufactured in Australia by Schiavello. The system is modular, beam based with a broad range of applications.
These include:• Ergonomic rectilinear office desking and workstations available in both
conventional and bridged clusters• Executive desking• Conference and boardroom tables
All items are available as either fixed height or height adjustable with adjustmentoptions to suit sit as well as sit to stand applications.Tested for strength, durability, stability, function and ergonomics conforming to:Australian Standard AS/NZ 4442:1997 “Office desks”.
HEIGHT ADJUSTABLEKrossi is available in a number of height adjustable options that can be infinitely varied within the particular adjustment range. These options are: • Technician adjustable - easy individual leg adjustment• User adjustable - via an easy winder mechanism• Electronically adjustable - power adjustment for multi user requirements• FLA - friction lock adjustable - facilitating quick changes for sit applications
Standard sit height adjustment range: 610 mm –900 mm or 610 mm – 860 mm for FLASit to stand height adjustment range: 610 mm –1200 mm
CABLE RETICULATIONThe system includes optional clip-on segregated cable reticulation trays and a selection of service outlet modules and soft wiring connections.Also included are integrated components that provide efficient means of routing services cabling to the cable trays from the ceiling, walls or floor, for example, power blades, umbilicals and power poles.The softwiring electrical system is Schiavello Lettric, certified to Australian Standard AS/NZS 3131.
DIvISIONAL SCREENSKrossi is compatible with Schiavello System 18, System 30, System 45, System70, E45 and Vide divisional screens and includes a complete range of panel
FINISHESAll aluminium is powder coated to Australian Standard AS 3715-2002 in a range of Schiavello ColourLab colours.All metal components are powder coated to Australian standard AS4506 2005 in a range of Schiavello ColourLab colours.
WORKTOPSStandard worktops can be specified 25 mm or 33 mm thick with square or soft rounded corners (50 mm radius). Available finishes include selected laminates, timber veneers and powder coated MDF in a range of standard or custom colours. Custom edge profiles and finishes are also available upon request, offering vast design possibilities.
SUSTAINABLEKrossi is manufactured in accordance with international environmental standards: ISO 14001. All components are either reusable or recyclable. Krossi is Greentag certified by Ecospecifier to levels A, B and C, some conditions apply.
WARRANTYKrossi is covered by a minimum five year warranty against faulty materials and workmanship. This includes a guarantee to all standard parts, components and service for a period of no less than 10 years from date of installation.
Product Specificationsgeneral I construction I finishes I accessories I warranty
schiavello.com/krossiSCH/TKRO01-B
Schiavello Group Pty Ltd reserves the right to change any or all details without prior notice. All dimensions stated within this document are nominal and/or approximate only and subject to variation.
Melbourne Head OfficeSchiavello (Vic) Pty Ltd1 Sharps RoadTullamarine VIC Australia 3043T: 61) 3 9330 8888F: 61) 3 9330 8899
Melbourne ShowroomSchiavello (Vic) Pty LtdMetropol8 Whiteman StreetSouthbank VIC Australia 3006T: 61) 3 9674 1500F: 61) 3 9674 1650
AdelaideSchiavello (SA) Pty LtdGround Floor, 101 Currie StreetAdelaide SA Australia 5000T: 08) 8112 2300F: 08) 8231 1419
BrisbaneSchiavello (Qld) Pty Ltd265 Coronation DriveMilton QLD Australia 4064T: 07) 3368 3388F: 07) 387602130
CanberraSchiavello (ACT) Pty Ltd2-6 Collie StreetFyshwick ACT Australia 2609T: 02) 6124 0500F: 02) 6280 4370
PerthSchiavello (WA) Pty Ltd1315 Hay StreetWest Perth WA Australia 6005T: 08) 9420 6588 F: 08) 9322 1337
SydneySchiavello (NSW) Pty Ltd69 Campbell StreetSurry Hills NSW Australia 2010T: 02) 9211 3311F: 02) 9212 3788
SingaporeSchiavello Singapore Pte LtdNo.1 Magazine Road#01-05 Central MallSingapore 059567T: 65) 6533 8011F: 65) 6533 2811