W H E E L S E T S

D I V I S I O N

2 0 1 3

WHEELSET TYPE BA004 The wheelset type BA 004 is designed for heavy freight wagons with axle load of up to 23,5 tons. The assembly is with resistant to pressure and deformation optimized monoblock wheels and with axle maximum load of 23,5 tons.

Maximum speed: 120km/h Parameters of the wheelset according to BN 918274 and EN 13260 Weight of the wheelset: 998kg.

MAIN PARAMETERS OF THE AXLE: Diameters of the axle for assembly: Ø130х191mm according to EN 13261 Nominal weight: 390kg. Material: A1N EN13261 2003

MAIN PARAMETERS OF THE WHEEL: - High resistance to thermo mechanical impacts during stopping action. - Low level of axial deformation of the wheel diaphragm. - Low level of residual pressures and good strength characteristics of the material. Diameter of the rolling ring: Ø920mm Minimal repair diameter: Ø840mm Nominal weight: 304kg. Material: ER7 EN 13262

The design of the wheelset and the wheels originates from the needs of the clients to use wagons with bigger axle load, higher security, longer life and lower exploitation and maintenance cost. The manufacture and control of the wheelset is performed according to the requirements of BN 918274 and EN 13260.

WHEELSET FOR INTERCITY

PASSENGER COACHES

TYPE BA 092

Higher exploitation security due to the high resistance to pressure actions and low deformation of the wheels in the presence of pressure actions. Weight of the wheelset: 1394kg.

MAIN PARAMETERS OF THE AXLE: Diameters of the axle for assembly: Ø120х179 mm by EN 13261 Nominal weight: 374kg. Material: A1N EN13261 2003

MAIN PARAMETERS OF THE WHEEL: Diameter of the rolling ring: Ø920mm Minimal repair diameter: Ø854mm Nominal weight: 304kg. Material: ER7 EN 13262

The design of the wheelset and the wheels originates from the needs of the clients for usage of sleeping and passenger wagons with speed of motion of 200km/h. The manufacture and control of the wheelset is performed according to the requirements of BN 918274 and EN 1326

WHEELSET FOR 25 ton

AXLE LOAD The wheelset is for heavy freight wagons with axle load of 25 tons (as type BA314). The assembly is with resistant to pressure and deformation optimized monoblock wheels and axle, designed for load of up to 25 tons.

Maximum speed: 120km/h Parameters of the wheelset according to BN 918274 and EN 13260 Weight of the wheelset: 1064kg.

MAIN PARAMETERS OF THE WHEEL: Diameters of the axle for assembly: Ø130х191mm according to EN 13261 Nominal weight: 404kg. Material: A1N EN13261 2003

MAIN PARAMETERS OF THE WHEEL: - High resistance to thermo mechanical impacts during stopping action. - Low level of axial deformation of the wheel diaphragm. - Low level of residual pressures and good strength characteristics of the material. Diameter of the rolling ring: Ø920mm Minimal repair diameter: Ø840mm Nominal weight: 330kg. Material: ER7 EN 13262 The wheelset satisfy the needs of the clients to use wagons with very high axle load, higher security, longer life and lower exploitation and maintenance cost. The manufacture and control of the wheelset is performed according to the requirements of BN 918274 and EN 13260.

WHEELSET Ø1000mm FOR PASSENGER AND

FREIGHT WAGONS

Designed for exploitation on freight wagons as well as on tanks which are using bogies type BT4. The construction has proven its high reliability during its long lasting exploitation and long period between the repairs.

Weight of the wheelset 1244kg.

MAIN PARAMETERS OF THE WHEEL: Diameters of the axle for assembly: Ø120х179 mm according to EN 13261 Nominal weight: 386kg. Material: A1N EN13261 2003

MAIN PARAMETERS OF THE WHEEL: Diameter of the rolling ring: Ø1000mm Minimal repair diameter: Ø934mm Nominal weight: 429kg. Material: ER7 EN 13262

The design of the wheelset and the wheels originates from the needs of the clients to use passenger wagons and tanks with speed of motion 160 km/h. The manufacture and control of the wheelset is performed according to its purpose and the requirements of BN 918274 and EN 13260.

WHEELSET Ø920mm

for 20 ton axle load

Designed for exploitation on passenger and freight wagons. The construction has proven its high reliability during its long lasting exploitation and long period between repairs. Weight of the wheelset 1100kg.

MAIN PARAMETERS OF THE WHEEL: Diameters of the axle for assembly of bearings: Ø120х179 mm according to EN 13261 Grease for assembly – Li2 Nominal weight: 339kg. Material: EA1N EN13261

MAIN PARAMETERS OF THE WHEEL: Asymmetric with diameter of the rolling ring: Ø920mm Minimal repair diameter: Ø840mm Nominal weight: 381kg. Material: ER7 EN13262

The design of the wheelset and the wheels originates from the needs of the clients for usage of freight wagons with speed of motion 120 km/h. The manufacture, control and repair of the wheelset is performed according to its purpose and the requirements of BN 918274, EN 13260, 984.0400 and VPI04.

WHEELSET FOR PASSENGER COACHES

FOR BOGIE Y32

Higher exploitation security due to the high resistance to pressure actions and low deformation of the wheels in the presence of pressure actions. Weight of the wheelset: 11224kg.

MAIN PARAMETERS OF THE AXLE: Diameters of the axle for assembly: Ø130х217 mm by EN 13261 Nominal weight: 362kg. Material: A1N EN13261 2003

MAIN PARAMETERS OF THE WHEEL: Diameter of the rolling ring: Ø920mm Minimal repair diameter: Ø854mm Nominal weight: 307kg. Material: ER7 EN 13262

The design of the wheelset and the wheels originates from the needs of the clients for usage of sleeping and passenger wagons with speed of motion of 200km/h. The manufacture and control of the wheelset is performed according to the requirements of BN 918274 and EN 13260