kimia bab 3
TRANSCRIPT
-
8/7/2019 Kimia Bab 3
1/15
CHAPTER 3
Nomenclature and Chemical Reaction Equation
By : Putri Ardiana Puspita Sari (X-8/29)
-
8/7/2019 Kimia Bab 3
2/15
Chemical Nomenclature
Chemical nomenclature is the term given to the naming of compounds. Chemists use
specific rules and "conventions" to name different compounds. This section is
designed to help you review some of those rules and conventions.
Oxidation and Reduction - Chemical Reaction EquationForming Ionic Compounds - Equalizes Reaction Coefficient
Arrangement of Atoms
Naming Ionic Compounds
Naming Binary Molecular Compounds
Naming Inorganic Acids
Naming Compounds
-
8/7/2019 Kimia Bab 3
3/15
Oxidation and Reduction
When forming compounds, it is important to know something about the way atoms willreact with each other. One of the most important manners in which atoms and/or
molecules react with each other is the oxidation/reduction reaction.
Oxidation/Reduction reactions are the processes of losing and gaining electrons
respectively. Just remember, "LEO the lion
says GER:" Lose Electrons Oxidation, Gain Electrons Reduction. Oxidation numbers are
assigned to atoms and compounds as a way to tell scientists where the electrons are ina reaction. It is often referred to as the "charge" on the atom or compound. The
oxidation number is assigned according to a standard set of rules. They are as
follows:An atom of a pure element has an oxidation number of zero.
For single atoms in an ion, their oxidation number is equal to their charge.
Fluorine is always -1 in compounds.
Cl, Br, and I are always -1 in compounds except when they are combined with O or F.
H is normally +1 and O is normally -2.
The oxidation number of a compound is equal to the sum of the oxidation numbers for
each atom in the compound.
BACK
-
8/7/2019 Kimia Bab 3
4/15
Forming Ionic Compounds
Knowing the oxidation number of a compound is very important when discussing ionic
compounds. Ionic compounds are combinations of positive and negative ions. They aregenerally formed when nonmetals and metals bond. To determine which substance is
formed, we must use the charges of the ions involved. To make a neutral molecule, the
positive charge of the cation (positively-charged ion) must equal the negative charge of the
anion (negatively-charged ion). In order to create a neutral charged molecule, you must
combine the atoms in certain proportions. Scientists use subscripts to identify how many of
each atom makes up the molecule. For example, when combining magnesium and nitrogenwe know that the magnesium ion has a "+2" charge and the nitrogen ion has a "-3" charge.
To cancel these charges, we must have three magnesium atoms for every two nitrogen
atoms:
3Mg2+ + 2N3- --> Mg3N2
Knowledge of the charges of ions is crucial to knowing the formulas of the compoundsformed.
alkalis (1st column elements) form "+1" ions such as Na+ and Li+
alkaline earth metals (2nd column elements) form "2+" ions such as Mg2+ and Ba2+
halogens (7th column elements) form "-1" ions such as Cl- and I-
BACK
-
8/7/2019 Kimia Bab 3
5/15
Naming Ionic Compounds
The outline below provides the rules for naming ionic compounds:
Positive Ions
1. Monatomic cations (a single atom with a positive charge) take the name of the
element plus the word "ion"
Examples:
Na+ = sodium ion
Zn+2 = zinc ion
2. If an element can form more than one (1) positive ion, the charge is indicated by the
Roman numeral in parentheses followed by the word "ion"
Examples:
Fe2+ = iron(II) ion
Fe3+ = iron (III) ion
BACK
-
8/7/2019 Kimia Bab 3
6/15
Negative Ions
1. Monatomic anions (a single atom with a negative charge) change their ending to "-ide"
Examples:
O2- = oxide ion
Cl- = chloride ion
2. Oxoanions (negatively charged polyatomic ions which contain O) end in "-ate".
3. Polyatomic anions (a negatively charged ion containing more than one type of element)
often add a hydrogen atom; in this case, the anion's name either adds "hydrogen-" or "bi-" to
the beginning
Example:
CO
3
2-
becomes HCO
3
-
"Carbonate" becomes either "Hydrogen Carbonate" or "Bicarbonate"
-
8/7/2019 Kimia Bab 3
7/15
4. When combining cations and anions into an ionic compound, you
always put the cation name first and then the anion name (the
molecular formulas are also written in this order as well.)
Examples:
Na+ + Cl- --> NaCl
sodium + chloride --> sodium chloride
Cu2+ + SO42- -->CuSO4copper(II) + sulfate --> copper(II) sulfate
Al3+ + 3NO3- --> Al(NO3)3
aluminum + nitrate --> aluminum nitrate
-
8/7/2019 Kimia Bab 3
8/15
Arrangement of Atoms
In naming ions, it is important to consider "isomers." Isomers are compounds with thesame molecular formula, but different arrangements of atoms. Thus, it is important to
include some signal within the name of the ion that identifies which arrangement you
are talking about. There are three main types of classification, geometric, optical and
structural isomers.
1. Geometric isomers refers to which side of the ion atoms lie. The prefixes used todistinguish geometric isomers are cis meaning substituents lie on the same side of
the ion and trans meaning they lie on opposite sides. Below is a diagram to help you
remember.
BACK
-
8/7/2019 Kimia Bab 3
9/15
2. Optical isomers differ in the arrangement of four groups around a chiral carbon.
These two isomers are differentiated as L and D.
3. Structural isomers differentiate between the placement of two chlorine atoms
around a hexagonal carbon ring. These three isomers are identified as o, m, and p.Once
again we have given you a few clues to help your memory.
-
8/7/2019 Kimia Bab 3
10/15
Naming Binary Molecular Compounds
Molecular compounds are formed from the covalent bonding between non-metallicelements. The nomenclature for these compounds is described in the following set
of rules.
1. The more positive atom is written first (the atom which is the furthest to the left
and to the bottom of the periodic table)
2. The more negative second atom has an "-ide" ending.
3. Each prefix indicates the number of each atom present in the compound.
Number of Atoms Prefix Number of Atoms Prefix
1 Mono 6 Hexa
2 Di 7 Hepta
3 Tri 8 Octa
4 Tetra 9 Nona
5 Penta 10 Deca
Examples:
CO2 = carbon dioxide
P4S10 = tetraphosphorus decasulfide
BACK
-
8/7/2019 Kimia Bab 3
11/15
Naming Inorganic Acids
1. Binary acids (H plus a nonmetal element) are acids that dissociate into hydrogen
atoms and anions in water. Acids that only release one hydrogen atom are knownasmonoprotic. Those acids that release more than one hydrogen atom are
called polyproticacids. When naming these binary acids, you merely add "hydro-"
(denoting the presence of a hydrogen atom) to the beginning and "-ic acid" to the
end of the anion name.
Examples:
HCl = hydrochloric acidHBr = hydrobromic acid
2. Ternary acids (also called oxoacids, are formed by hydrogen plus another
element plus oxygen) are based on the name of the anion. In this case, the -
ate, and -itesuffixes for the anion are replaced with -ic and -ous respectively. The
new anion name is then followed by the word "acid." The chart below depicts thechanges in nomenclature.
Anion Name Acid Name
Hypo__ite Hypo__ous acid
__ite __ous acid
__ate __ic acid
Per__ate Per__ic acid
Example:
ClO4
- to HClO4
=> perchlorate to
perchloric acid
ClO- to HClO => hypochlorite to
hypochlorous acid
BACK
-
8/7/2019 Kimia Bab 3
12/15
-
8/7/2019 Kimia Bab 3
13/15
Chemical Reaction Equation
Equalizes Reaction Coefficient
NN22 (g)(g) + H+ H22 (g)(g) NH NH33(g)(g)Directly:
NN22 (g)(g) + 3H+ 3H22 (g)(g) 2NH 2NH33 (g)(g)
-- AlAl (s)(s) + O+ O22 (g)(g) Al Al22OO33 (s)(s)
Suppose a, b, c, ... ...
aAlaAl (s)(s) + bO+ bO22 (g)(g) cAl cAl22OO33 (s)(s)
Al :Al : a = 2ca = 2cO :O : 2b = 3c2b = 3c
MisalMisal c = 1,c = 1, makamaka ::
aa = 2c = 2.1 = 2= 2c = 2.1 = 2
2b = 3c = 3.12b = 3c = 3.1
b = 3/2b = 3/2
DidapatkanDidapatkan ::
a = 2a = 2 aa
= 4= 4b = 3/2b = 3/2 x2x2 bb
= 3= 3
c = 1c = 1 cc= 2= 2jadijadi ::
4Al4Al (s)(s) + 3O+ 3O22 (g)(g) 2Al 2Al22OO33 (s)(s)
BACK
-
8/7/2019 Kimia Bab 3
14/15
Equalizes Reaction Coefficient
Cu(s) + HNO3(aq) Cu(NO3)2(aq) + NO2(g) + H2O(l)
With the help of oxidation-reduction:
Cu(s) + HNO3(aq) Cu(NO3)2(aq) + NO2(g) + H2O(l)00 ++55 +2+2 +
4+4
+2+2 --11
x2x2CuCu(s)(s) + HNO+ HNO3(3(aqaq)) Cu(NO Cu(NO33))2(2(aqaq)) + 2NO+ 2NO2(g)2(g) + H+ H22OO(l)(l)
So , ...So , ...
CuCu(s)(s) +4
HNO
+4
HNO
3(3(aqaq)) Cu(NO
Cu(NO
33))2(2(aqaq)) + 2NO
+ 2NO
2(g)2(g) + 2H+ 2H22OO
(l)(l)
BACK
-
8/7/2019 Kimia Bab 3
15/15
THE END